RDMSPortfolio

WELCOME

THE FOLLOWING IS AN OVERVIEW OF RDMS(Restaurant Design Management Service)

I have included some recent projects for your review in an effort to help illustrate how RDMS may be able to better organize your Friendly's remodel or new construction projects. We will ensure that your project has the proper corporate image requirements and add that professional touch to make your restaurant stand out above the competition.

Thank you for considering RDMS for your construction project

Rich

VIRGINIA BEACH VAGREENBRIAR MALL

OUT PARCEL

Ground up new construction ZL PrototypeCustom exterior to meet development criteriaCustom kitchen & fountain to meet owner requirements

2

PHILIPSBURG MALL PHILIPSBURG, NJ

OUT PARCEL

 Ground up new construction AA PrototypeCustom service room layout to meet owner requirementsCustom kitchen & fountain to meet owner requirements

NEWTON, NJSUSSSEX COUNTY MALL

IN-LINE STRIP MALLCONVERSION

In line strip mall fit up utilizing existing HVAC system. Added roof top and grill exhaust to work in conjunction with existing equipment, thereby reducing construction cost.

GLENN BURNIE MDI BuildingRemodel

Interior exterior remodel with kitchen fountain upgrade. Also included ADA restroom upgrade and expanded toilet facilities. Expanded seating capacity. Freestanding sign relocation to improve roadside visibility.

Hockessin, DELantana Center

New Freestanding Friendly’s fit up

 Landlord provided shell per RDMS specifications and cost contributions. Owner provided fit up and exterior signage.Concept energy décor scheme

NEWARK DESAMBS

PROTOTYPEREMODEL

Interior exterior remodel with kitchen and fountain upgrade. Also include grease trap repairs during close down. Concept energy decor

BURKE VAX Building Prototype

Remodel

Interior exterior remodel with development review exterior criteria. Fountain kitchen upgrade. Impact decor

CROFTON MDX Building Prototype

Remodel

 Interior exterior remodel. Fountain upgrade.Impact décor.

READING PAI building Prototype

Remodel

Interior exterior remodel. Kitchen fountain upgrade with focus on fountain pickup product display. Focus refurbish décor.

ALLENTOWN PAZL Building Prototype

Remodel

 Interior exterior remodel. Service room repairs.Autumn décor.

MIDDLE SMITHFIELD PAAA prototype

Ground up joint development CVS

New AA prototype, complete site development. New traffic signal, road widening, private water supply, sewer pump station. Owner customized kitchen/fountain/ service room/ office/ restrooms.

DAYTON OHATLANTA BREAD

Conversion

Interior exterior fit up. Utilizing existing architectural features and mechanical infrastructure to reduce conversion costs. 45 day turnover time.

DOVER DEI Building Prototype

Remodel

Interior exterior remodel. Fountain / kitchen upgrade. Partial ADA restroom upgrade. Seating capacity increase. New carryout window.Concept energy décor.

CONVENT STATION NJRemodel

Interior exterior remodel. Kitchen / fountain service room upgrade. Concept energy family décor.

FIRE RE-CONSTRUCTION

In the event of catastrophic fire loss, RDMS can react quickly and decisively to help you get back to business. We will work with your insurance company to prepare estimates and assist with damage assessment. We will fast track the design, permit and construction activities to reduce restaurant down time.

HAMBURG PANew AA Prototype

New Prototype development. Due diligence, project budget, pre-approved site concept design. Work with build to suite developer, Cabela’s real estate division and architectural review board to develop comprehensive budget projections.

  617 Manchester, VT    Remodel Scope of Work Specification

Site:  S4  

Exterior:  E1 Paint cupola dome Red EP-5E2 Clad roof dormers and under windows with vinyl siding. ES-1E4 Clad existing gable(s) with vinyl siding. ES-1E5 Repair / Clad existing building trim with aluminum coil

stock White

E6 Replace existing white Friendly's logo sign(s) with routed red PVC (2) gable and (1) wall (if allowed) PMS-485C

E7 Remove existing pergola -

E9 Sandblast antique white finish from brick on entire building, seal brick with a clear waterproofing sealant.

Silane Sealer, Weather works J-28 by Dayton

Superior or EqualE10 Paint building exterior trim and quoins. Per Markup and Decorating

Schedule

E11 Replace existing exterior black torch lightsSea Gull Lighting #8823-12

Black Powercoat Cast Aluminum

E12 Replace front entrance door EF-1 Per Specification #08411

E13 Add building downlighting insure all other lighting is functioning properly

LSI Doral Wall Mount #WDRS-VF-175-MT-BRZ-GS

Interior  

I2 Clad existing cabinets/cash stand with beadboard, trim and add new solid surface top WS-1 and ST-1

I5 Install new recess can fixtures in dining room to increase light level

Elco #EL27HIC Recessed Can Fixture with ELA99SG Gold Reflector, White Trim and 13W 2-Pin Quad Lamp

2700K CF

I7Remove incandescent flood lights from existing can fixtures, replace with reducer/locking device and compact fluorescent lamp.

Satco #80/1888 Medium to GU24 Reducer Locking Device With 26W GU24

2700k CFI8 Replace damaged ceiling tiles to match existing, re-

support grid as required and paint tiles and grid. P-5

I12 Refinish existing table edges. Router oak edging, stain and finish. WS-1

I22 Remove existing upholstered window valances. Repair existing trim, crown molding as required. -

I23Remove mural and ribbon border paper. Prep walls, skim coating until a smooth paintable surface is achieved.

Per Markup and Decorating Schedule

I25 Retain existing artwork and augment art package in area where mural was removed.

Reinstall Artwork in Original Locations

I26 Remove existing window blinds. Replace with new logo sun shades. WB-1

PROJECT SCOPECorporate Project

Standards

RDMS will work with the Friendly’s development team to ensure that your scope complies with the corporate directives.  Additionally we will customize this scope to meet your projects specific needs.

We will work with corporate approved vendors to provide a compliant equipment & décor package for your project. When completed the project will pass corporate site inspections, thereby saving you costly rework.

CONSTRUCTION PROJECT--- BUDGET WORKSHEETPROJ NAME Newark, DE CONCEPT ENERGY 9/25/2011 14:07PROJ # FRIENDLY'SSCOPE REMODEL SF COST SF COSTLOCATION 2670 KIRKWOOD HIGHWAY 4554 4554

$32.85 $27.59START DATE12/14/2008

COMPLETION DATE12/20/2008

ITEM VENDOR TERMS FULL SCOPE FRANCHISE SCOPEREMODEL

GC 59,514.50 62,594.00NEW SALES AREA/FOUNTAIN FLOOR TILE

LABOR & MAT 825 SF4,300.00

0.00NEW SALES AREA BASE TILE 4"X 20"

LABOR & MAT 100LF267.00

0.00WALL TILE FOUNTAIN

LABOR & MAT 470SF 4,700.00

0.00FRP FOUNTAIN REAR WALL

LABOR & MAT 352 SF0.00

1,200.00PAINT SOFFIT FOUNTAIN AREA

LABOR & MAT 115SF0.00

350.00EQUIPMENT 0.00 10,104.76

NEW STAINLESS STEEL WORK TABLE FOUNTAIN BACK LINE

1,566.000.00

NEW DIP CAB ON LINE DD-88 5,628.00 0.00TRACK LIGHT FOR MENU BOARD

LABOR & MAT 2 UNITS380.00

0.00CARPET LABOR & MAT 11,492.25 10,102.25SEATING & DIVIDERS 17,553.47 16,631.15FURNITURE

CASH COUNTER / PICK UP SHELF SOLID CORE8,163.00

3,650.00PODIUM 1,021.00 350.00MILLWORK/TRIM

CLG AND WNSCT TRIM PAINTED LABOR & MAT1,200.00

0.00LSI GRAPHICS PACKAGECircular Light Fixture 465.00 0.00

Door Decal 215.00 0.00Exterior Cone 525.000.00

Eyebrow 9,000.00 0.00Fascia Sign incld 750.00

Framed Artwork 465.00 3,000.00Fribble Mural 305.00 0.00

Geometric Art 1,050.00 0.00Interior Cone 325.00 0.00

Interior MB 500.00 1,400.00Monitor w/Enclosure 1,850.00 0.00

Wall Mural Set 325.00 0.00

INSTALLATION FOR EXTERIOR SIGNAGE incld 0.00LCD & INSTALLATION W/CAT5 REMOTE DATA FEED 1,700.00 0.00RE-ARANGE FOUNTAIN BACK LINE AROUND NEW DIP CAB RE-LOCATE HAND SINK TO REAR AISLE LABOR 2,200.00 0.00FIELD INSTALL DECORATIVE LAMINATE AT FOUNTAIN BACK DROP DIE PARTITION

LABOR & MAT 5 SHEETS 950.00 0.00PERMITS 0.00 0.00PLANS 0.00 0.00

REMODEL SUB-TOTAL 132,324.22 110,132.16CONTINGENCY 5% $22,192.06 6,616.21 5,506.61TAX 2,820.52 2,450.29SHIPPING 2,350.44 2,041.91RDMS PM 5,000.00 5,000.00RDMS EXPENSES 500.00 500.00REMODEL TOTAL 149,611.39 125,630.97

    $23,980.42KITCHEN / FOUNTAIN /SERVICE ROOM /GREASE TRAP

GC 14,800.00 14,800.00SODA RELOCATION 1,000.00 1,000.00TRIMARK 15,500.00 15,500.00KITCHEN PASS THRU SHELF 1,600.00 1,600.00CONTINGENCY 5% 1,645.00 1,565.00TAX 930.00 930.00SHIPPING 775.00 775.00TOTAL PROJECT TOTAL $185,861.39 $161,800.97

THE BUDGET PROCESS

Your project budget is critical to a successful business plan. RDMS will provide accurate budget projections designed to position you for success.

A poor budget number can lead to un-realistic expectations and under borrowing in the event of a construction loan or other financing methods.

To avoid this you will be presented with an initial budget to cover worst case cost scenarios. As the project progresses thru approval phases and bidding the budget will be constantly adjusted to track the real cost to you.

CONCEPT DESIGN

What ever your needs RDMS can prepare conceptual plans, always accompanied by accurate budget costs to help you achieve your design objectives. 

RDMS will help you maximize your seating capacity, streamline your kitchen and delivery process, while maintaining a pleasing dining experience thru solid design and attention to décor details.

The fixed fee quote provided for you will cover multiple designs if necessary to satisfy your needs.