10 01 Breather Filters GB
Transcript of 10 01 Breather Filters GB
K. & H. Eppensteiner GmbH & Co. KGHardtwaldstraße 43 · D-68775 Ketsch/Rh.Postfach 1120 · D-68768 Ketsch/Rh.Telefon: 0 62 02 / 6 03-0Telefax: 0 62 02 / 6 03-199E-Mail: [email protected]: www.Eppensteiner.de
Industrial Filters · Accumulators
®
Technical modifications reserved! 10/01/10.99/6000
OrderingInformationSelection of filter size:using the computer program"EPE - FILTERSELECT" orperformance characteristicsin this brochure.Special designs available on request.
SizeBF 8-32 EF 1 EFK 1 EF 2 EFK 2 EF 3 EFK 3 EF 4 EFK 4 EF 5 EFK 5 EF 6 EFK 6 FEF 0 FEF 1
BFS 7, BFS 20BFV 20
Part Qty. Designation Material Part No.
please indicate ordering information "Filter Assembly"
please indicate ordering information "Filter Assembly"
please indicate ordering information "Seal Kit"
1 1 Cover Various
Steel
Aluminium
Various
Sika-B 200
Spring steel
4.8
4.8
Buna N
Fibre
Fibre
2 1 Flange
3 1 Filler nozzle 3650 3658 3659 3660 3661 3662
4 1 Filler strainer 3651 3663 3664 3665 3666 3667 5779 5767
5 1 Filter plate 5635 5636 5637 5638 5639 5640
6 1 Locking ring 5641 5642 5643 5644 5645 5646
7 3 Oval head screw 5783
8 6 Socket head cap screw 5770
9 1 Seal
Seal
Seal
10 1
11 1
Filter TypeBF = Breather filter
BFV = Breather withBypass ValveBreather withFilter ElementBreather andFiller Filter
Breather andFiller Filter
Filler Filter
BFS =
FEF =
EF =
EFK =
Nominal Size8; 15; 20; 25; 32
20
72001
1-252-323-404-505-656-80
Filtration GradeS 130
S 130
P5 P10 P25
S10 S20 S40
G 130
Seal
F = Fibre (standard)
0 = without
P = Buna N
Material0 = standard
Add. Info.0 = without5 = silicon freeQ = dip stick BF, EF and EFK onlyZ = inspection certificate
Filter Assembly BF 15 S 130 – F 0 0
D BF 15 S 130 – F 0Seal Kit
Size Weight in kg A B C D E F G SW NW
BF 81 0,05 55 10 20 ø 30 9 55 G 1/4 19 9
BF 15 0,1 10512
25 ø 50 12 105 G 1/2 27 13
BF 20 0,15 140 26ø 60
13 140 G 3/4 35 18
BF 25 0,2 17516
27 15 175 G 1 41 23
BF 32 0,3 225 35 ø 80 17 225 G 11/4 55 32
BFS 70 0,03 11 41 ø 46 6 G 1/4 19 7
BFS 200,3 12
57 ø 81 15G 3/4 32 18
BFV 20 54 ø 77 14
EF 1000,4 107
3617
ø 60ø 28 G 1 46 25
EFK 10 37 ø 38
EF 2000,5 131
39 17 ø 67ø 34 G 11/4 55 32
EFK 20 40 19 ø 47
EF 3000,7 155
44 18 ø 75ø 42 G 11/2 60 40
EFK 30 41 19 ø 54
EF 4000,8 187
48 18 ø 93ø 53 G 2 75 50
EFK 40 46 22 ø 66
EF 5001,4 218
58 20 ø 120ø 67 G 21/2 90 65
EFK 50 51 24 ø 83
EF 6001,6 256
69 22 ø 140ø 82 G 3 105 80
EFK 60 55 26 ø 96
FEF 00 0,17 62 48 ø 50 ø 45 ø 28
FEF 10 0,23 98 54 ø 83 ø 76 ø 49
Dimensions
Filler nozzle and filler strainer only available as unit
Spare Parts
Dimensions
BF 8-32
EFK 1-6 FEF 0 and FEF 1
BFS 7… /BFS 20…
EF 1-6
BFV 20
lockable design on request
hole pattern FEF 0 hole pattern FEF 1
Quality and StandardisationThe development, manufacturing and assembly of EPE Industrial filters and filter elements is performed withinthe guidelines of a certified quality management system according to DIN EN ISO 9001.The calculation of strength and the filter tests are done in compliance to actual pressure vessel regulations and national & international standards.A filter inspection by accredited certification bodies(e.g. TÜV, GL, LRS, LRIS, ABS, BV, DNV, DRIRE, UDT etc.) is possible on request.
Installation, Starting and Maintenance
Filter InstallationFlange filter assembly at mounting device or in reservoir opening.
StartingSwitch on system pump and start system. Pay attention to flow noiseat breather filter. If flow noise can be heard, check size selection in accordance to air flow rate (Initial flow resistance < 20 mbar).
MaintenanceBE, B7SL45/21... : If a vacuum or overpressure of 0,02 bar is displayed,the spin on filter 80.45/21 needs to be replaced.All other breather filters do not have any maintenance indicators.We therefore recommend to check or to replace breather filters in regularly periods according to following table:
Filter Element ServiceTLF:open cover (Part 1) by unscrewing wing nut (Part 2). Replace (H..SL, P and VS...) or clean (G...material) filter element in the case of visual contamination.Insert filter element (Part 4) in filter housing and refit cover while tighten wing nut hand screwed.
BF, BS, BE, B 7SL... :unscrew spin-on filter (Part 1) and refit new one with seal (Part 2)hand screwed.
BF 8-32, BFS, BFV... :unscrew filter, replace completely and screw on again using a newfibre seal (Part 10).
EF... :unscrew cover (Part 1)and replace filter disc (Part 5).
EFK... :unscrew cover (Part 1) and check strainer (Part 4) for contamination, clean if necessary, check seal (Part 9) for damage and refit cover.
FEF... :open cover (Part 1) , release from security chain and replace, close security chain.
Check filler filters during maintenance for contaminationand clean if necessary.
filter application environmentalconditionsaverage dustconcentration
39 - 25 mg/m 4000 h
3000 h
3000 h
350 - 80 mg/m330 - 100 mg/m
service interval
general mechanicalengineering
heavy industry
mobile hydraulics
10
Quality assured!
Industrial Filters · Accumulators
®
Filters for tank mounting
Efficient filtration of air
Air breather filters with changeable spin-on filters (BF and BE)
Combined air breather and filler filters (TLF, EF, EFK, FEF, FES, BE)
Flange mounted filters
Low pressure drop
Special high efficient filter media, also for water absorbing
Breather FiltersTLF I..., TLF II...,TLF III...,
BF...,BE...,EF...,EFK...
Air flow up to 3500 m³/hConnection up to DN 250
A B D
BF 7 SL 45/21, BF 7 SL 90 and 130BS 7 SL45/21, BS 7 SL 90 and 130
Bs 7 SL 45/21
TLF 2-32
0,5
TLF 2-32
0,6
TLF 2-32
8,0
TLF 2-32
33,0
E F G
BE 7 SL 45/21
H
BF 7 SL 45/21
Part
Part
Qty.
Qty.
Designation
Designation
Spin-on filter
Cover
Seal
Wing nut
Strainer
Filter Element
Seal
Filter housing
Flat Head Screw
Filler strainer
Seal
Seal
BF 7 SL 90
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
3
3
4
4
5
6
7
8
BF 7 SL 130
BS 7 SL 45/21
BS 7 SL 90
BS 7 SL 130
BE 7 SL 45/21
B 7 SL 45/21
0,8
1,4
1,5
0,7
1,3
1,4
1,3
1,2
191
Material
Material
229
Various
Steel
277
Buna N
Steel
191
PA 6
Various
229
Buna N
Various
277
4.8
Various
Cover
Wing nut
Filter element
Filter housing
Filler nozzle
Filler strainer
Steel
Steel
Various
Various
Aluminium
Various_ _
Buna N
Buna N
68
73
146
183
231
146
183
231
146
146
ø 60 ø 92
ø 85 ø 128
please indicate ordering information "Spin On Filter"
please indicate ordering information "Filter Assembly"
please indicate ordering information "Filter Assembly"
please indicate ordering information "Filter Element"
please indicate ordering information "Filter Assembly"please indicate ordering information "Filter Element"
please indicate ordering information "Filter Assembly"
please indicate ordering information "Seal Kit"
please indicate ordering information "Seal Kit"
* Seal Kit only for TLF/TLF 0 2-32, TLF I/III 7-125 and TLF I 8-250
please indicate ordering information "Seal Kit"
please indicate ordering information "Seal Kit"
ø 85 ø 127
-
ø 35 ø 92
ø 50 ø 128
ø 50 ø 127
-
ø 85 ø 92
ø 60 ø 92
7
10
10
-
-
-
10
16
-
-
-
-
-
-
98
-
G ¾
G 1¼
G 1¼
Part No. 5767
Part No. 4349
Part No. 5767
Part No. 5233
Part No. 5784
G ¾
G 1¼
G 1¼
Part No. 4285
G 1
G 1
-
-
-
-
-
-
ø 49
ø 36
Maintenance Indicator Connection Material
0 = standard
Filter Element
TLF 02-32 TLF 2-32
7. 007 P 10 – S 00 – 0 – P
Filtration Grade DifferentialPressure
Nominal SizeTLF I, II, III
2-32
7-125
8-250
TLF I, III
TLF I
1-25
2-32
3-40
4-50
5-65
6-80
TLF
TLF 0
Filter-Element
Filter Element SizeNominal
Size
1-252-32
6-80
7-125
8-250
3-404-505-65
002 006
007
008004
NominalSize
ElementSize
ElementSize
Type:
7.
Filter Element Design Bypass Valve Seal AdditionalInformation
0 = without5 = silicon freeE = vent valveZ = inspection certificate
Filter Assembly
Seal Kit* D TLF III H10SL –
TLF III 7 - 125
7 - 125
P 10 – S 00 – 0 0 0 – 00 P 0 0
0 – 00 P 0
Magnet
0 = without
Dimensions
Dimensions
Size
Size
Size
Weight in kg
Weightin kg
C
Dimensions
Spare Parts
Spare Parts
Filler nozzle and filler strainer only available as unitSeal kit is not possible
Performance Characteristics OrderingInformationSelection of filter size:using the computer program"EPE - FILTERSELECT" orperformance characteristicsin this brochure.
Special designs available on request.
TLF... = reservoir breather filter, flange mountable
TLF 0... = reservoir breather filter, flange mountablewith filler strainer
TLF I... = reservoir breather filter with femalethread, abbr. DINconnection
TLF II... = reservoir breather filter with male threadconnection
TLF III... = reservoir breather filter wit male threadconnection, abbr. DINflange and filler strainer
Filter Type
0 =without 00= standard
Maximumallowablepressure dropacross thefilter element
S = standard
0... = standard adhesive T = 80°C
...0 = standard material...Z = zinc free
0 = without 0 =withoutP =Buna N
5 = silicon freeC = silicagelZ = inspection certificate
nominal filtration grade in µmG = stainless steel wire mesh, cleanable
G10 G25 G40 G60 G80 G100VS = nonwoven media, not cleanable
VS 25 VS 40 VS 60P = paper, not cleanable
P5 P10 P25
absolute filtration grade(ISO4572)in µmH...SL = micro glass-fibre, not cleanable H1SL H3SL H6SL H10SL
H20SLAS = micro glass-fibre, water
absorbing, not cleanableAS1 AS3 AS6 AS10 AS20
Maintenance Indicator Connection Material
0 = standard
Filter Element 80. 90 P 10 – S 00 – 0 – P
Filtration Grade DifferentialPressure
Nominal Size
FilterElement
Type:
80.
Type:
BF 7 SL
BS 7 SL
BE 7 SLB 7 SL
45/219013045/219013045/2145/21
Filter Element Design Bypass Valve Seal AdditionalInformation
0 = without5 = silicon freeE = vent valveZ = inspection certificate
Filter Assembly
Seal Kit D BF 7 SL H10SL –
BF 7 SL 90
90
P 10 – S 00 – 0 0 A
A
– 00 P 0 0
– 00 P 0
Magnet
0 = without
OrderingInformationSelection of filter size:using the computer program"EPE - FILTERSELECT" orperformance characteristicsin this brochure.Special designsavailable on request.
BF 7 SL = Breather Filterwith flange
BS 7 SL = Breather withwelded hexagonnipple
BE 7 SL = Breather withFiller Filter
B 7 SL = Breather withoutFiller Filter
Filter Type
0 = withoutA = pressure gauge M 010
only for B 7 SL and BE 7 SL
For technical data see our brochure "Maintenance Indicator"
00= standard
Connection forB 7 SL andBE 7 SL = withwelded nipple
Maximumallowablepressure dropacross thefilter element
S = standard
0... = standard adhesive T = 100°C
E... = special adhesive T = 160°C
...0 = standard material
0 = without P =Buna N
5 = silicon freeZ = inspection certificate
nominal filtration grade in µmVS = nonwoven media, not cleanable
VS 25 VS 40 VS 60P = paper, not cleanable
P5 P10 P25
absolute filtration grade (ISO4572) in µmH...SL = micro glass-fibre, not cleanable H1SL H3SL H6SL H10SL
H20SLAS = micro glass-fibre, water
absorbing, not cleanableAS1 AS3 AS6 AS10 AS20
TLF III 7-125 TLF I 8-250TLF I 7-125
Air flow characteristicsTest temperature: 20°C
Breather Filters
TLF0..., TLF..., BF..., BFS..., BFV...EF..., EFK..., FEF...BS 7SL..., BE 7 SL..., B 7 SL...Operating temperature-20°C to +100°C
ApplicationFiltration and dehumidifying of intake air for industrial systems.
DesignTLF...: filter housing for breathing and ventilation with changeable filter element inside. Filter elements H...SL up to 1µm filtration grade with glass-fibre filter media, water absorbing filter media AS optional. Types: I with female thread or DIN flange ( for size TLF I 8-20), II with male thread, III with male thread (with flange for size TLF III 7-125) and filler filter(130 µm strainer). Type TLF 0 with 500 µm synthetic strainer.
BF, BFS, BFV...: compact housing for breathing and ventilation with integrated filter media (BF ) or pleated filter element made out of paper ( BFS, BFV ). Design with a dip stick possible.Bypass valves 0,1 bar for in and outflowing air for type BFV.
EF...: 130 µm filler strainer with screwed on breather cap and interior sintered bronze plate.
EFK...: 130 µm filler strainer with screwed cap, without breather.
FEF..: combination out of a flangeable filler filter ( 500 µm strainer ) and a breather cap including a 40µm foamed material. The breather cap can be removed through a bayonet joint and is secured with a chain.
BF 7 SL...:, BS 7 SL...: breather filter with a spin on filter and pleated filter element with filter paper P. Design with flange connection ( BF 7 SL...) or female thread (BS 7 SL ...).
B 7 SL..., BE 7 SL...: design as BF... and BS 7 SL, however with connection for maintenance indicator ( B 7 SL...) and /or extension with a filler filter (500 µm strainer).
Materials: as per spare parts list in this brochure.
BE 7 SL 45/21, B 7 SL 45/21 BS 7 SL 45/21,BS 7 SL 90 and 130
BF 7 SL 45/21,BF 7 SL 90 and 130
ManometerM 010(0 - 6 bar)
Size TLF I, TLF II, TLF III
Part Qty. Designation Material 1 - 25 2 - 32 3 - 40 4 - 50 5 - 65 6 - 80
1 1
2 1 Part No. 4349
3 1
4 1
5 1 Part No. 3650 Part No. 3658 Part No. 3659 Part No. 3660 Part No. 3661 Part No. 3662
Part No. 3651 Part No. 3663 Part No. 3664 Part No. 3665 Part No. 3666 Part No. 36676 1
Spare parts
Size
Design with filler nozzle
Design with filler nozzleand filler strainer
Weightin kg
A B C D E F G H J K SW
TLF I 1-25 0,5ø 102 24 ø 92
G 1 5343
TLFI 2-32 0,6 G 11/4 63
TLF I 3-40 2,1
ø 177 46 ø 162
G 11/2
TLFI 4-50 2,1 G 2 98 88
TLFI 5-65 1,6 G 21/2
TLFI 6-80 1,9 ø 210 45 ø 190 G 3 88 78
TLFII 1-25 0,6ø 102 24 ø 92 17
G 1 5343 6
46
TLFII 2-32 0,7 G 11/4 63 55
TLFII 3-40 2,3
ø 177 46 ø 162 18
G 11/27
60
TLFII 4-50 2,3 G 2 98 88 75
TLFII 5-65 2,0 20 G 21/2 8 90
TLFII 6-80 2,3 ø 210 45 ø 190 22 G 3 78 78 9 105
TLFIII 1-25 0,7ø 102 24 ø 92
ø 27 10117
G 1 5343 6
46
TLFIII 2-32 0,8 ø 36 123 G 11/4 63 55
TLFIII 3-40 2,5 ø 42 14718
G 11/27
60
TLFIII 4-50 2,5 ø 177 46 ø 162 ø 52,5 177 G 2 98 88 75
TLFIII 5-65 2,3 ø 67 209 20 G 21/2 8 90
TLFIII 6-80 2,7 ø 210 45 ø 190 ø 82 246 22 G 3 78 78 9 105
TLF I...
TLF III...
TLF II...
A B D
BF 7 SL 45/21, BF 7 SL 90 and 130BS 7 SL45/21, BS 7 SL 90 and 130
Bs 7 SL 45/21
TLF 2-32
0,5
TLF 2-32
0,6
TLF 2-32
8,0
TLF 2-32
33,0
E F G
BE 7 SL 45/21
H
BF 7 SL 45/21
Part
Part
Qty.
Qty.
Designation
Designation
Spin-on filter
Cover
Seal
Wing nut
Strainer
Filter Element
Seal
Filter housing
Flat Head Screw
Filler strainer
Seal
Seal
BF 7 SL 90
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
3
3
4
4
5
6
7
8
BF 7 SL 130
BS 7 SL 45/21
BS 7 SL 90
BS 7 SL 130
BE 7 SL 45/21
B 7 SL 45/21
0,8
1,4
1,5
0,7
1,3
1,4
1,3
1,2
191
Material
Material
229
Various
Steel
277
Buna N
Steel
191
PA 6
Various
229
Buna N
Various
277
4.8
Various
Cover
Wing nut
Filter element
Filter housing
Filler nozzle
Filler strainer
Steel
Steel
Various
Various
Aluminium
Various_ _
Buna N
Buna N
68
73
146
183
231
146
183
231
146
146
ø 60 ø 92
ø 85 ø 128
please indicate ordering information "Spin On Filter"
please indicate ordering information "Filter Assembly"
please indicate ordering information "Filter Assembly"
please indicate ordering information "Filter Element"
please indicate ordering information "Filter Assembly"please indicate ordering information "Filter Element"
please indicate ordering information "Filter Assembly"
please indicate ordering information "Seal Kit"
please indicate ordering information "Seal Kit"
* Seal Kit only for TLF/TLF 0 2-32, TLF I/III 7-125 and TLF I 8-250
please indicate ordering information "Seal Kit"
please indicate ordering information "Seal Kit"
ø 85 ø 127
-
ø 35 ø 92
ø 50 ø 128
ø 50 ø 127
-
ø 85 ø 92
ø 60 ø 92
7
10
10
-
-
-
10
16
-
-
-
-
-
-
98
-
G ¾
G 1¼
G 1¼
Part No. 5767
Part No. 4349
Part No. 5767
Part No. 5233
Part No. 5784
G ¾
G 1¼
G 1¼
Part No. 4285
G 1
G 1
-
-
-
-
-
-
ø 49
ø 36
Maintenance Indicator Connection Material
0 = standard
Filter Element
TLF 02-32 TLF 2-32
7. 007 P 10 – S 00 – 0 – P
Filtration Grade DifferentialPressure
Nominal SizeTLF I, II, III
2-32
7-125
8-250
TLF I, III
TLF I
1-25
2-32
3-40
4-50
5-65
6-80
TLF
TLF 0
Filter-Element
Filter Element SizeNominal
Size
1-252-32
6-80
7-125
8-250
3-404-505-65
002 006
007
008004
NominalSize
ElementSize
ElementSize
Type:
7.
Filter Element Design Bypass Valve Seal AdditionalInformation
0 = without5 = silicon freeE = vent valveZ = inspection certificate
Filter Assembly
Seal Kit* D TLF III H10SL –
TLF III 7 - 125
7 - 125
P 10 – S 00 – 0 0 0 – 00 P 0 0
0 – 00 P 0
Magnet
0 = without
Dimensions
Dimensions
Size
Size
Size
Weight in kg
Weightin kg
C
Dimensions
Spare Parts
Spare Parts
Filler nozzle and filler strainer only available as unitSeal kit is not possible
Performance Characteristics OrderingInformationSelection of filter size:using the computer program"EPE - FILTERSELECT" orperformance characteristicsin this brochure.
Special designs available on request.
TLF... = reservoir breather filter, flange mountable
TLF 0... = reservoir breather filter, flange mountablewith filler strainer
TLF I... = reservoir breather filter with femalethread, abbr. DINconnection
TLF II... = reservoir breather filter with male threadconnection
TLF III... = reservoir breather filter wit male threadconnection, abbr. DINflange and filler strainer
Filter Type
0 =without 00= standard
Maximumallowablepressure dropacross thefilter element
S = standard
0... = standard adhesive T = 80°C
...0 = standard material...Z = zinc free
0 = without 0 =withoutP =Buna N
5 = silicon freeC = silicagelZ = inspection certificate
nominal filtration grade in µmG = stainless steel wire mesh, cleanable
G10 G25 G40 G60 G80 G100VS = nonwoven media, not cleanable
VS 25 VS 40 VS 60P = paper, not cleanable
P5 P10 P25
absolute filtration grade(ISO4572)in µmH...SL = micro glass-fibre, not cleanable H1SL H3SL H6SL H10SL
H20SLAS = micro glass-fibre, water
absorbing, not cleanableAS1 AS3 AS6 AS10 AS20
Maintenance Indicator Connection Material
0 = standard
Filter Element 80. 90 P 10 – S 00 – 0 – P
Filtration Grade DifferentialPressure
Nominal Size
FilterElement
Type:
80.
Type:
BF 7 SL
BS 7 SL
BE 7 SLB 7 SL
45/219013045/219013045/2145/21
Filter Element Design Bypass Valve Seal AdditionalInformation
0 = without5 = silicon freeE = vent valveZ = inspection certificate
Filter Assembly
Seal Kit D BF 7 SL H10SL –
BF 7 SL 90
90
P 10 – S 00 – 0 0 A
A
– 00 P 0 0
– 00 P 0
Magnet
0 = without
OrderingInformationSelection of filter size:using the computer program"EPE - FILTERSELECT" orperformance characteristicsin this brochure.Special designsavailable on request.
BF 7 SL = Breather Filterwith flange
BS 7 SL = Breather withwelded hexagonnipple
BE 7 SL = Breather withFiller Filter
B 7 SL = Breather withoutFiller Filter
Filter Type
0 = withoutA = pressure gauge M 010
only for B 7 SL and BE 7 SL
For technical data see our brochure "Maintenance Indicator"
00= standard
Connection forB 7 SL andBE 7 SL = withwelded nipple
Maximumallowablepressure dropacross thefilter element
S = standard
0... = standard adhesive T = 100°C
E... = special adhesive T = 160°C
...0 = standard material
0 = without P =Buna N
5 = silicon freeZ = inspection certificate
nominal filtration grade in µmVS = nonwoven media, not cleanable
VS 25 VS 40 VS 60P = paper, not cleanable
P5 P10 P25
absolute filtration grade (ISO4572) in µmH...SL = micro glass-fibre, not cleanable H1SL H3SL H6SL H10SL
H20SLAS = micro glass-fibre, water
absorbing, not cleanableAS1 AS3 AS6 AS10 AS20
TLF III 7-125 TLF I 8-250TLF I 7-125
Air flow characteristicsTest temperature: 20°C
Breather Filters
TLF0..., TLF..., BF..., BFS..., BFV...EF..., EFK..., FEF...BS 7SL..., BE 7 SL..., B 7 SL...Operating temperature-20°C to +100°C
ApplicationFiltration and dehumidifying of intake air for industrial systems.
DesignTLF...: filter housing for breathing and ventilation with changeable filter element inside. Filter elements H...SL up to 1µm filtration grade with glass-fibre filter media, water absorbing filter media AS optional. Types: I with female thread or DIN flange ( for size TLF I 8-20), II with male thread, III with male thread (with flange for size TLF III 7-125) and filler filter(130 µm strainer). Type TLF 0 with 500 µm synthetic strainer.
BF, BFS, BFV...: compact housing for breathing and ventilation with integrated filter media (BF ) or pleated filter element made out of paper ( BFS, BFV ). Design with a dip stick possible.Bypass valves 0,1 bar for in and outflowing air for type BFV.
EF...: 130 µm filler strainer with screwed on breather cap and interior sintered bronze plate.
EFK...: 130 µm filler strainer with screwed cap, without breather.
FEF..: combination out of a flangeable filler filter ( 500 µm strainer ) and a breather cap including a 40µm foamed material. The breather cap can be removed through a bayonet joint and is secured with a chain.
BF 7 SL...:, BS 7 SL...: breather filter with a spin on filter and pleated filter element with filter paper P. Design with flange connection ( BF 7 SL...) or female thread (BS 7 SL ...).
B 7 SL..., BE 7 SL...: design as BF... and BS 7 SL, however with connection for maintenance indicator ( B 7 SL...) and /or extension with a filler filter (500 µm strainer).
Materials: as per spare parts list in this brochure.
BE 7 SL 45/21, B 7 SL 45/21 BS 7 SL 45/21,BS 7 SL 90 and 130
BF 7 SL 45/21,BF 7 SL 90 and 130
ManometerM 010(0 - 6 bar)
Size TLF I, TLF II, TLF III
Part Qty. Designation Material 1 - 25 2 - 32 3 - 40 4 - 50 5 - 65 6 - 80
1 1
2 1 Part No. 4349
3 1
4 1
5 1 Part No. 3650 Part No. 3658 Part No. 3659 Part No. 3660 Part No. 3661 Part No. 3662
Part No. 3651 Part No. 3663 Part No. 3664 Part No. 3665 Part No. 3666 Part No. 36676 1
Spare parts
Size
Design with filler nozzle
Design with filler nozzleand filler strainer
Weightin kg
A B C D E F G H J K SW
TLF I 1-25 0,5ø 102 24 ø 92
G 1 5343
TLFI 2-32 0,6 G 11/4 63
TLF I 3-40 2,1
ø 177 46 ø 162
G 11/2
TLFI 4-50 2,1 G 2 98 88
TLFI 5-65 1,6 G 21/2
TLFI 6-80 1,9 ø 210 45 ø 190 G 3 88 78
TLFII 1-25 0,6ø 102 24 ø 92 17
G 1 5343 6
46
TLFII 2-32 0,7 G 11/4 63 55
TLFII 3-40 2,3
ø 177 46 ø 162 18
G 11/27
60
TLFII 4-50 2,3 G 2 98 88 75
TLFII 5-65 2,0 20 G 21/2 8 90
TLFII 6-80 2,3 ø 210 45 ø 190 22 G 3 78 78 9 105
TLFIII 1-25 0,7ø 102 24 ø 92
ø 27 10117
G 1 5343 6
46
TLFIII 2-32 0,8 ø 36 123 G 11/4 63 55
TLFIII 3-40 2,5 ø 42 14718
G 11/27
60
TLFIII 4-50 2,5 ø 177 46 ø 162 ø 52,5 177 G 2 98 88 75
TLFIII 5-65 2,3 ø 67 209 20 G 21/2 8 90
TLFIII 6-80 2,7 ø 210 45 ø 190 ø 82 246 22 G 3 78 78 9 105
TLF I...
TLF III...
TLF II...
A B D
BF 7 SL 45/21, BF 7 SL 90 and 130BS 7 SL45/21, BS 7 SL 90 and 130
Bs 7 SL 45/21
TLF 2-32
0,5
TLF 2-32
0,6
TLF 2-32
8,0
TLF 2-32
33,0
E F G
BE 7 SL 45/21
H
BF 7 SL 45/21
Part
Part
Qty.
Qty.
Designation
Designation
Spin-on filter
Cover
Seal
Wing nut
Strainer
Filter Element
Seal
Filter housing
Flat Head Screw
Filler strainer
Seal
Seal
BF 7 SL 90
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
3
3
4
4
5
6
7
8
BF 7 SL 130
BS 7 SL 45/21
BS 7 SL 90
BS 7 SL 130
BE 7 SL 45/21
B 7 SL 45/21
0,8
1,4
1,5
0,7
1,3
1,4
1,3
1,2
191
Material
Material
229
Various
Steel
277
Buna N
Steel
191
PA 6
Various
229
Buna N
Various
277
4.8
Various
Cover
Wing nut
Filter element
Filter housing
Filler nozzle
Filler strainer
Steel
Steel
Various
Various
Aluminium
Various_ _
Buna N
Buna N
68
73
146
183
231
146
183
231
146
146
ø 60 ø 92
ø 85 ø 128
please indicate ordering information "Spin On Filter"
please indicate ordering information "Filter Assembly"
please indicate ordering information "Filter Assembly"
please indicate ordering information "Filter Element"
please indicate ordering information "Filter Assembly"please indicate ordering information "Filter Element"
please indicate ordering information "Filter Assembly"
please indicate ordering information "Seal Kit"
please indicate ordering information "Seal Kit"
* Seal Kit only for TLF/TLF 0 2-32, TLF I/III 7-125 and TLF I 8-250
please indicate ordering information "Seal Kit"
please indicate ordering information "Seal Kit"
ø 85 ø 127
-
ø 35 ø 92
ø 50 ø 128
ø 50 ø 127
-
ø 85 ø 92
ø 60 ø 92
7
10
10
-
-
-
10
16
-
-
-
-
-
-
98
-
G ¾
G 1¼
G 1¼
Part No. 5767
Part No. 4349
Part No. 5767
Part No. 5233
Part No. 5784
G ¾
G 1¼
G 1¼
Part No. 4285
G 1
G 1
-
-
-
-
-
-
ø 49
ø 36
Maintenance Indicator Connection Material
0 = standard
Filter Element
TLF 02-32 TLF 2-32
7. 007 P 10 – S 00 – 0 – P
Filtration Grade DifferentialPressure
Nominal SizeTLF I, II, III
2-32
7-125
8-250
TLF I, III
TLF I
1-25
2-32
3-40
4-50
5-65
6-80
TLF
TLF 0
Filter-Element
Filter Element SizeNominal
Size
1-252-32
6-80
7-125
8-250
3-404-505-65
002 006
007
008004
NominalSize
ElementSize
ElementSize
Type:
7.
Filter Element Design Bypass Valve Seal AdditionalInformation
0 = without5 = silicon freeE = vent valveZ = inspection certificate
Filter Assembly
Seal Kit* D TLF III H10SL –
TLF III 7 - 125
7 - 125
P 10 – S 00 – 0 0 0 – 00 P 0 0
0 – 00 P 0
Magnet
0 = without
Dimensions
Dimensions
Size
Size
Size
Weight in kg
Weightin kg
C
Dimensions
Spare Parts
Spare Parts
Filler nozzle and filler strainer only available as unitSeal kit is not possible
Performance Characteristics OrderingInformationSelection of filter size:using the computer program"EPE - FILTERSELECT" orperformance characteristicsin this brochure.
Special designs available on request.
TLF... = reservoir breather filter, flange mountable
TLF 0... = reservoir breather filter, flange mountablewith filler strainer
TLF I... = reservoir breather filter with femalethread, abbr. DINconnection
TLF II... = reservoir breather filter with male threadconnection
TLF III... = reservoir breather filter wit male threadconnection, abbr. DINflange and filler strainer
Filter Type
0 =without 00= standard
Maximumallowablepressure dropacross thefilter element
S = standard
0... = standard adhesive T = 80°C
...0 = standard material...Z = zinc free
0 = without 0 =withoutP =Buna N
5 = silicon freeC = silicagelZ = inspection certificate
nominal filtration grade in µmG = stainless steel wire mesh, cleanable
G10 G25 G40 G60 G80 G100VS = nonwoven media, not cleanable
VS 25 VS 40 VS 60P = paper, not cleanable
P5 P10 P25
absolute filtration grade(ISO4572)in µmH...SL = micro glass-fibre, not cleanable H1SL H3SL H6SL H10SL
H20SLAS = micro glass-fibre, water
absorbing, not cleanableAS1 AS3 AS6 AS10 AS20
Maintenance Indicator Connection Material
0 = standard
Filter Element 80. 90 P 10 – S 00 – 0 – P
Filtration Grade DifferentialPressure
Nominal Size
FilterElement
Type:
80.
Type:
BF 7 SL
BS 7 SL
BE 7 SLB 7 SL
45/219013045/219013045/2145/21
Filter Element Design Bypass Valve Seal AdditionalInformation
0 = without5 = silicon freeE = vent valveZ = inspection certificate
Filter Assembly
Seal Kit D BF 7 SL H10SL –
BF 7 SL 90
90
P 10 – S 00 – 0 0 A
A
– 00 P 0 0
– 00 P 0
Magnet
0 = without
OrderingInformationSelection of filter size:using the computer program"EPE - FILTERSELECT" orperformance characteristicsin this brochure.Special designsavailable on request.
BF 7 SL = Breather Filterwith flange
BS 7 SL = Breather withwelded hexagonnipple
BE 7 SL = Breather withFiller Filter
B 7 SL = Breather withoutFiller Filter
Filter Type
0 = withoutA = pressure gauge M 010
only for B 7 SL and BE 7 SL
For technical data see our brochure "Maintenance Indicator"
00= standard
Connection forB 7 SL andBE 7 SL = withwelded nipple
Maximumallowablepressure dropacross thefilter element
S = standard
0... = standard adhesive T = 100°C
E... = special adhesive T = 160°C
...0 = standard material
0 = without P =Buna N
5 = silicon freeZ = inspection certificate
nominal filtration grade in µmVS = nonwoven media, not cleanable
VS 25 VS 40 VS 60P = paper, not cleanable
P5 P10 P25
absolute filtration grade (ISO4572) in µmH...SL = micro glass-fibre, not cleanable H1SL H3SL H6SL H10SL
H20SLAS = micro glass-fibre, water
absorbing, not cleanableAS1 AS3 AS6 AS10 AS20
TLF III 7-125 TLF I 8-250TLF I 7-125
Air flow characteristicsTest temperature: 20°C
Breather Filters
TLF0..., TLF..., BF..., BFS..., BFV...EF..., EFK..., FEF...BS 7SL..., BE 7 SL..., B 7 SL...Operating temperature-20°C to +100°C
ApplicationFiltration and dehumidifying of intake air for industrial systems.
DesignTLF...: filter housing for breathing and ventilation with changeable filter element inside. Filter elements H...SL up to 1µm filtration grade with glass-fibre filter media, water absorbing filter media AS optional. Types: I with female thread or DIN flange ( for size TLF I 8-20), II with male thread, III with male thread (with flange for size TLF III 7-125) and filler filter(130 µm strainer). Type TLF 0 with 500 µm synthetic strainer.
BF, BFS, BFV...: compact housing for breathing and ventilation with integrated filter media (BF ) or pleated filter element made out of paper ( BFS, BFV ). Design with a dip stick possible.Bypass valves 0,1 bar for in and outflowing air for type BFV.
EF...: 130 µm filler strainer with screwed on breather cap and interior sintered bronze plate.
EFK...: 130 µm filler strainer with screwed cap, without breather.
FEF..: combination out of a flangeable filler filter ( 500 µm strainer ) and a breather cap including a 40µm foamed material. The breather cap can be removed through a bayonet joint and is secured with a chain.
BF 7 SL...:, BS 7 SL...: breather filter with a spin on filter and pleated filter element with filter paper P. Design with flange connection ( BF 7 SL...) or female thread (BS 7 SL ...).
B 7 SL..., BE 7 SL...: design as BF... and BS 7 SL, however with connection for maintenance indicator ( B 7 SL...) and /or extension with a filler filter (500 µm strainer).
Materials: as per spare parts list in this brochure.
BE 7 SL 45/21, B 7 SL 45/21 BS 7 SL 45/21,BS 7 SL 90 and 130
BF 7 SL 45/21,BF 7 SL 90 and 130
ManometerM 010(0 - 6 bar)
Size TLF I, TLF II, TLF III
Part Qty. Designation Material 1 - 25 2 - 32 3 - 40 4 - 50 5 - 65 6 - 80
1 1
2 1 Part No. 4349
3 1
4 1
5 1 Part No. 3650 Part No. 3658 Part No. 3659 Part No. 3660 Part No. 3661 Part No. 3662
Part No. 3651 Part No. 3663 Part No. 3664 Part No. 3665 Part No. 3666 Part No. 36676 1
Spare parts
Size
Design with filler nozzle
Design with filler nozzleand filler strainer
Weightin kg
A B C D E F G H J K SW
TLF I 1-25 0,5ø 102 24 ø 92
G 1 5343
TLFI 2-32 0,6 G 11/4 63
TLF I 3-40 2,1
ø 177 46 ø 162
G 11/2
TLFI 4-50 2,1 G 2 98 88
TLFI 5-65 1,6 G 21/2
TLFI 6-80 1,9 ø 210 45 ø 190 G 3 88 78
TLFII 1-25 0,6ø 102 24 ø 92 17
G 1 5343 6
46
TLFII 2-32 0,7 G 11/4 63 55
TLFII 3-40 2,3
ø 177 46 ø 162 18
G 11/27
60
TLFII 4-50 2,3 G 2 98 88 75
TLFII 5-65 2,0 20 G 21/2 8 90
TLFII 6-80 2,3 ø 210 45 ø 190 22 G 3 78 78 9 105
TLFIII 1-25 0,7ø 102 24 ø 92
ø 27 10117
G 1 5343 6
46
TLFIII 2-32 0,8 ø 36 123 G 11/4 63 55
TLFIII 3-40 2,5 ø 42 14718
G 11/27
60
TLFIII 4-50 2,5 ø 177 46 ø 162 ø 52,5 177 G 2 98 88 75
TLFIII 5-65 2,3 ø 67 209 20 G 21/2 8 90
TLFIII 6-80 2,7 ø 210 45 ø 190 ø 82 246 22 G 3 78 78 9 105
TLF I...
TLF III...
TLF II...
A B D
BF 7 SL 45/21, BF 7 SL 90 and 130BS 7 SL45/21, BS 7 SL 90 and 130
Bs 7 SL 45/21
TLF 2-32
0,5
TLF 2-32
0,6
TLF 2-32
8,0
TLF 2-32
33,0
E F G
BE 7 SL 45/21
H
BF 7 SL 45/21
Part
Part
Qty.
Qty.
Designation
Designation
Spin-on filter
Cover
Seal
Wing nut
Strainer
Filter Element
Seal
Filter housing
Flat Head Screw
Filler strainer
Seal
Seal
BF 7 SL 90
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
3
3
4
4
5
6
7
8
BF 7 SL 130
BS 7 SL 45/21
BS 7 SL 90
BS 7 SL 130
BE 7 SL 45/21
B 7 SL 45/21
0,8
1,4
1,5
0,7
1,3
1,4
1,3
1,2
191
Material
Material
229
Various
Steel
277
Buna N
Steel
191
PA 6
Various
229
Buna N
Various
277
4.8
Various
Cover
Wing nut
Filter element
Filter housing
Filler nozzle
Filler strainer
Steel
Steel
Various
Various
Aluminium
Various_ _
Buna N
Buna N
68
73
146
183
231
146
183
231
146
146
ø 60 ø 92
ø 85 ø 128
please indicate ordering information "Spin On Filter"
please indicate ordering information "Filter Assembly"
please indicate ordering information "Filter Assembly"
please indicate ordering information "Filter Element"
please indicate ordering information "Filter Assembly"please indicate ordering information "Filter Element"
please indicate ordering information "Filter Assembly"
please indicate ordering information "Seal Kit"
please indicate ordering information "Seal Kit"
* Seal Kit only for TLF/TLF 0 2-32, TLF I/III 7-125 and TLF I 8-250
please indicate ordering information "Seal Kit"
please indicate ordering information "Seal Kit"
ø 85 ø 127
-
ø 35 ø 92
ø 50 ø 128
ø 50 ø 127
-
ø 85 ø 92
ø 60 ø 92
7
10
10
-
-
-
10
16
-
-
-
-
-
-
98
-
G ¾
G 1¼
G 1¼
Part No. 5767
Part No. 4349
Part No. 5767
Part No. 5233
Part No. 5784
G ¾
G 1¼
G 1¼
Part No. 4285
G 1
G 1
-
-
-
-
-
-
ø 49
ø 36
Maintenance Indicator Connection Material
0 = standard
Filter Element
TLF 02-32 TLF 2-32
7. 007 P 10 – S 00 – 0 – P
Filtration Grade DifferentialPressure
Nominal SizeTLF I, II, III
2-32
7-125
8-250
TLF I, III
TLF I
1-25
2-32
3-40
4-50
5-65
6-80
TLF
TLF 0
Filter-Element
Filter Element SizeNominal
Size
1-252-32
6-80
7-125
8-250
3-404-505-65
002 006
007
008004
NominalSize
ElementSize
ElementSize
Type:
7.
Filter Element Design Bypass Valve Seal AdditionalInformation
0 = without5 = silicon freeE = vent valveZ = inspection certificate
Filter Assembly
Seal Kit* D TLF III H10SL –
TLF III 7 - 125
7 - 125
P 10 – S 00 – 0 0 0 – 00 P 0 0
0 – 00 P 0
Magnet
0 = without
Dimensions
Dimensions
Size
Size
Size
Weight in kg
Weightin kg
C
Dimensions
Spare Parts
Spare Parts
Filler nozzle and filler strainer only available as unitSeal kit is not possible
Performance Characteristics OrderingInformationSelection of filter size:using the computer program"EPE - FILTERSELECT" orperformance characteristicsin this brochure.
Special designs available on request.
TLF... = reservoir breather filter, flange mountable
TLF 0... = reservoir breather filter, flange mountablewith filler strainer
TLF I... = reservoir breather filter with femalethread, abbr. DINconnection
TLF II... = reservoir breather filter with male threadconnection
TLF III... = reservoir breather filter wit male threadconnection, abbr. DINflange and filler strainer
Filter Type
0 =without 00= standard
Maximumallowablepressure dropacross thefilter element
S = standard
0... = standard adhesive T = 80°C
...0 = standard material...Z = zinc free
0 = without 0 =withoutP =Buna N
5 = silicon freeC = silicagelZ = inspection certificate
nominal filtration grade in µmG = stainless steel wire mesh, cleanable
G10 G25 G40 G60 G80 G100VS = nonwoven media, not cleanable
VS 25 VS 40 VS 60P = paper, not cleanable
P5 P10 P25
absolute filtration grade(ISO4572)in µmH...SL = micro glass-fibre, not cleanable H1SL H3SL H6SL H10SL
H20SLAS = micro glass-fibre, water
absorbing, not cleanableAS1 AS3 AS6 AS10 AS20
Maintenance Indicator Connection Material
0 = standard
Filter Element 80. 90 P 10 – S 00 – 0 – P
Filtration Grade DifferentialPressure
Nominal Size
FilterElement
Type:
80.
Type:
BF 7 SL
BS 7 SL
BE 7 SLB 7 SL
45/219013045/219013045/2145/21
Filter Element Design Bypass Valve Seal AdditionalInformation
0 = without5 = silicon freeE = vent valveZ = inspection certificate
Filter Assembly
Seal Kit D BF 7 SL H10SL –
BF 7 SL 90
90
P 10 – S 00 – 0 0 A
A
– 00 P 0 0
– 00 P 0
Magnet
0 = without
OrderingInformationSelection of filter size:using the computer program"EPE - FILTERSELECT" orperformance characteristicsin this brochure.Special designsavailable on request.
BF 7 SL = Breather Filterwith flange
BS 7 SL = Breather withwelded hexagonnipple
BE 7 SL = Breather withFiller Filter
B 7 SL = Breather withoutFiller Filter
Filter Type
0 = withoutA = pressure gauge M 010
only for B 7 SL and BE 7 SL
For technical data see our brochure "Maintenance Indicator"
00= standard
Connection forB 7 SL andBE 7 SL = withwelded nipple
Maximumallowablepressure dropacross thefilter element
S = standard
0... = standard adhesive T = 100°C
E... = special adhesive T = 160°C
...0 = standard material
0 = without P =Buna N
5 = silicon freeZ = inspection certificate
nominal filtration grade in µmVS = nonwoven media, not cleanable
VS 25 VS 40 VS 60P = paper, not cleanable
P5 P10 P25
absolute filtration grade (ISO4572) in µmH...SL = micro glass-fibre, not cleanable H1SL H3SL H6SL H10SL
H20SLAS = micro glass-fibre, water
absorbing, not cleanableAS1 AS3 AS6 AS10 AS20
TLF III 7-125 TLF I 8-250TLF I 7-125
Air flow characteristicsTest temperature: 20°C
Breather Filters
TLF0..., TLF..., BF..., BFS..., BFV...EF..., EFK..., FEF...BS 7SL..., BE 7 SL..., B 7 SL...Operating temperature-20°C to +100°C
ApplicationFiltration and dehumidifying of intake air for industrial systems.
DesignTLF...: filter housing for breathing and ventilation with changeable filter element inside. Filter elements H...SL up to 1µm filtration grade with glass-fibre filter media, water absorbing filter media AS optional. Types: I with female thread or DIN flange ( for size TLF I 8-20), II with male thread, III with male thread (with flange for size TLF III 7-125) and filler filter(130 µm strainer). Type TLF 0 with 500 µm synthetic strainer.
BF, BFS, BFV...: compact housing for breathing and ventilation with integrated filter media (BF ) or pleated filter element made out of paper ( BFS, BFV ). Design with a dip stick possible.Bypass valves 0,1 bar for in and outflowing air for type BFV.
EF...: 130 µm filler strainer with screwed on breather cap and interior sintered bronze plate.
EFK...: 130 µm filler strainer with screwed cap, without breather.
FEF..: combination out of a flangeable filler filter ( 500 µm strainer ) and a breather cap including a 40µm foamed material. The breather cap can be removed through a bayonet joint and is secured with a chain.
BF 7 SL...:, BS 7 SL...: breather filter with a spin on filter and pleated filter element with filter paper P. Design with flange connection ( BF 7 SL...) or female thread (BS 7 SL ...).
B 7 SL..., BE 7 SL...: design as BF... and BS 7 SL, however with connection for maintenance indicator ( B 7 SL...) and /or extension with a filler filter (500 µm strainer).
Materials: as per spare parts list in this brochure.
BE 7 SL 45/21, B 7 SL 45/21 BS 7 SL 45/21,BS 7 SL 90 and 130
BF 7 SL 45/21,BF 7 SL 90 and 130
ManometerM 010(0 - 6 bar)
Size TLF I, TLF II, TLF III
Part Qty. Designation Material 1 - 25 2 - 32 3 - 40 4 - 50 5 - 65 6 - 80
1 1
2 1 Part No. 4349
3 1
4 1
5 1 Part No. 3650 Part No. 3658 Part No. 3659 Part No. 3660 Part No. 3661 Part No. 3662
Part No. 3651 Part No. 3663 Part No. 3664 Part No. 3665 Part No. 3666 Part No. 36676 1
Spare parts
Size
Design with filler nozzle
Design with filler nozzleand filler strainer
Weightin kg
A B C D E F G H J K SW
TLF I 1-25 0,5ø 102 24 ø 92
G 1 5343
TLFI 2-32 0,6 G 11/4 63
TLF I 3-40 2,1
ø 177 46 ø 162
G 11/2
TLFI 4-50 2,1 G 2 98 88
TLFI 5-65 1,6 G 21/2
TLFI 6-80 1,9 ø 210 45 ø 190 G 3 88 78
TLFII 1-25 0,6ø 102 24 ø 92 17
G 1 5343 6
46
TLFII 2-32 0,7 G 11/4 63 55
TLFII 3-40 2,3
ø 177 46 ø 162 18
G 11/27
60
TLFII 4-50 2,3 G 2 98 88 75
TLFII 5-65 2,0 20 G 21/2 8 90
TLFII 6-80 2,3 ø 210 45 ø 190 22 G 3 78 78 9 105
TLFIII 1-25 0,7ø 102 24 ø 92
ø 27 10117
G 1 5343 6
46
TLFIII 2-32 0,8 ø 36 123 G 11/4 63 55
TLFIII 3-40 2,5 ø 42 14718
G 11/27
60
TLFIII 4-50 2,5 ø 177 46 ø 162 ø 52,5 177 G 2 98 88 75
TLFIII 5-65 2,3 ø 67 209 20 G 21/2 8 90
TLFIII 6-80 2,7 ø 210 45 ø 190 ø 82 246 22 G 3 78 78 9 105
TLF I...
TLF III...
TLF II...
K. & H. Eppensteiner GmbH & Co. KGHardtwaldstraße 43 · D-68775 Ketsch/Rh.Postfach 1120 · D-68768 Ketsch/Rh.Telefon: 0 62 02 / 6 03-0Telefax: 0 62 02 / 6 03-199E-Mail: [email protected]: www.Eppensteiner.de
Industrial Filters · Accumulators
®
Technical modifications reserved! 10/01/10.99/6000
OrderingInformationSelection of filter size:using the computer program"EPE - FILTERSELECT" orperformance characteristicsin this brochure.Special designs available on request.
SizeBF 8-32 EF 1 EFK 1 EF 2 EFK 2 EF 3 EFK 3 EF 4 EFK 4 EF 5 EFK 5 EF 6 EFK 6 FEF 0 FEF 1
BFS 7, BFS 20BFV 20
Part Qty. Designation Material Part No.
please indicate ordering information "Filter Assembly"
please indicate ordering information "Filter Assembly"
please indicate ordering information "Seal Kit"
1 1 Cover Various
Steel
Aluminium
Various
Sika-B 200
Spring steel
4.8
4.8
Buna N
Fibre
Fibre
2 1 Flange
3 1 Filler nozzle 3650 3658 3659 3660 3661 3662
4 1 Filler strainer 3651 3663 3664 3665 3666 3667 5779 5767
5 1 Filter plate 5635 5636 5637 5638 5639 5640
6 1 Locking ring 5641 5642 5643 5644 5645 5646
7 3 Oval head screw 5783
8 6 Socket head cap screw 5770
9 1 Seal
Seal
Seal
10 1
11 1
Filter TypeBF = Breather filter
BFV = Breather withBypass ValveBreather withFilter ElementBreather andFiller Filter
Breather andFiller Filter
Filler Filter
BFS =
FEF =
EF =
EFK =
Nominal Size8; 15; 20; 25; 32
20
72001
1-252-323-404-505-656-80
Filtration GradeS 130
S 130
P5 P10 P25
S10 S20 S40
G 130
Seal
F = Fibre (standard)
0 = without
P = Buna N
Material0 = standard
Add. Info.0 = without5 = silicon freeQ = dip stick BF, EF and EFK onlyZ = inspection certificate
Filter Assembly BF 15 S 130 – F 0 0
D BF 15 S 130 – F 0Seal Kit
Size Weight in kg A B C D E F G SW NW
BF 81 0,05 55 10 20 ø 30 9 55 G 1/4 19 9
BF 15 0,1 10512
25 ø 50 12 105 G 1/2 27 13
BF 20 0,15 140 26ø 60
13 140 G 3/4 35 18
BF 25 0,2 17516
27 15 175 G 1 41 23
BF 32 0,3 225 35 ø 80 17 225 G 11/4 55 32
BFS 70 0,03 11 41 ø 46 6 G 1/4 19 7
BFS 200,3 12
57 ø 81 15G 3/4 32 18
BFV 20 54 ø 77 14
EF 1000,4 107
3617
ø 60ø 28 G 1 46 25
EFK 10 37 ø 38
EF 2000,5 131
39 17 ø 67ø 34 G 11/4 55 32
EFK 20 40 19 ø 47
EF 3000,7 155
44 18 ø 75ø 42 G 11/2 60 40
EFK 30 41 19 ø 54
EF 4000,8 187
48 18 ø 93ø 53 G 2 75 50
EFK 40 46 22 ø 66
EF 5001,4 218
58 20 ø 120ø 67 G 21/2 90 65
EFK 50 51 24 ø 83
EF 6001,6 256
69 22 ø 140ø 82 G 3 105 80
EFK 60 55 26 ø 96
FEF 00 0,17 62 48 ø 50 ø 45 ø 28
FEF 10 0,23 98 54 ø 83 ø 76 ø 49
Dimensions
Filler nozzle and filler strainer only available as unit
Spare Parts
Dimensions
BF 8-32
EFK 1-6 FEF 0 and FEF 1
BFS 7… /BFS 20…
EF 1-6
BFV 20
lockable design on request
hole pattern FEF 0 hole pattern FEF 1
Quality and StandardisationThe development, manufacturing and assembly of EPE Industrial filters and filter elements is performed withinthe guidelines of a certified quality management system according to DIN EN ISO 9001.The calculation of strength and the filter tests are done in compliance to actual pressure vessel regulations and national & international standards.A filter inspection by accredited certification bodies(e.g. TÜV, GL, LRS, LRIS, ABS, BV, DNV, DRIRE, UDT etc.) is possible on request.
Installation, Starting and Maintenance
Filter InstallationFlange filter assembly at mounting device or in reservoir opening.
StartingSwitch on system pump and start system. Pay attention to flow noiseat breather filter. If flow noise can be heard, check size selection in accordance to air flow rate (Initial flow resistance < 20 mbar).
MaintenanceBE, B7SL45/21... : If a vacuum or overpressure of 0,02 bar is displayed,the spin on filter 80.45/21 needs to be replaced.All other breather filters do not have any maintenance indicators.We therefore recommend to check or to replace breather filters in regularly periods according to following table:
Filter Element ServiceTLF:open cover (Part 1) by unscrewing wing nut (Part 2). Replace (H..SL, P and VS...) or clean (G...material) filter element in the case of visual contamination.Insert filter element (Part 4) in filter housing and refit cover while tighten wing nut hand screwed.
BF, BS, BE, B 7SL... :unscrew spin-on filter (Part 1) and refit new one with seal (Part 2)hand screwed.
BF 8-32, BFS, BFV... :unscrew filter, replace completely and screw on again using a newfibre seal (Part 10).
EF... :unscrew cover (Part 1)and replace filter disc (Part 5).
EFK... :unscrew cover (Part 1) and check strainer (Part 4) for contamination, clean if necessary, check seal (Part 9) for damage and refit cover.
FEF... :open cover (Part 1) , release from security chain and replace, close security chain.
Check filler filters during maintenance for contaminationand clean if necessary.
filter application environmentalconditionsaverage dustconcentration
39 - 25 mg/m 4000 h
3000 h
3000 h
350 - 80 mg/m330 - 100 mg/m
service interval
general mechanicalengineering
heavy industry
mobile hydraulics
10
Quality assured!
Industrial Filters · Accumulators
®
Filters for tank mounting
Efficient filtration of air
Air breather filters with changeable spin-on filters (BF and BE)
Combined air breather and filler filters (TLF, EF, EFK, FEF, FES, BE)
Flange mounted filters
Low pressure drop
Special high efficient filter media, also for water absorbing
Breather FiltersTLF I..., TLF II...,TLF III...,
BF...,BE...,EF...,EFK...
Air flow up to 3500 m³/hConnection up to DN 250
K. & H. Eppensteiner GmbH & Co. KGHardtwaldstraße 43 · D-68775 Ketsch/Rh.Postfach 1120 · D-68768 Ketsch/Rh.Telefon: 0 62 02 / 6 03-0Telefax: 0 62 02 / 6 03-199E-Mail: [email protected]: www.Eppensteiner.de
Industrial Filters · Accumulators
®
Technical modifications reserved! 10/01/10.99/6000
OrderingInformationSelection of filter size:using the computer program"EPE - FILTERSELECT" orperformance characteristicsin this brochure.Special designs available on request.
SizeBF 8-32 EF 1 EFK 1 EF 2 EFK 2 EF 3 EFK 3 EF 4 EFK 4 EF 5 EFK 5 EF 6 EFK 6 FEF 0 FEF 1
BFS 7, BFS 20BFV 20
Part Qty. Designation Material Part No.
please indicate ordering information "Filter Assembly"
please indicate ordering information "Filter Assembly"
please indicate ordering information "Seal Kit"
1 1 Cover Various
Steel
Aluminium
Various
Sika-B 200
Spring steel
4.8
4.8
Buna N
Fibre
Fibre
2 1 Flange
3 1 Filler nozzle 3650 3658 3659 3660 3661 3662
4 1 Filler strainer 3651 3663 3664 3665 3666 3667 5779 5767
5 1 Filter plate 5635 5636 5637 5638 5639 5640
6 1 Locking ring 5641 5642 5643 5644 5645 5646
7 3 Oval head screw 5783
8 6 Socket head cap screw 5770
9 1 Seal
Seal
Seal
10 1
11 1
Filter TypeBF = Breather filter
BFV = Breather withBypass ValveBreather withFilter ElementBreather andFiller Filter
Breather andFiller Filter
Filler Filter
BFS =
FEF =
EF =
EFK =
Nominal Size8; 15; 20; 25; 32
20
72001
1-252-323-404-505-656-80
Filtration GradeS 130
S 130
P5 P10 P25
S10 S20 S40
G 130
Seal
F = Fibre (standard)
0 = without
P = Buna N
Material0 = standard
Add. Info.0 = without5 = silicon freeQ = dip stick BF, EF and EFK onlyZ = inspection certificate
Filter Assembly BF 15 S 130 – F 0 0
D BF 15 S 130 – F 0Seal Kit
Size Weight in kg A B C D E F G SW NW
BF 81 0,05 55 10 20 ø 30 9 55 G 1/4 19 9
BF 15 0,1 10512
25 ø 50 12 105 G 1/2 27 13
BF 20 0,15 140 26ø 60
13 140 G 3/4 35 18
BF 25 0,2 17516
27 15 175 G 1 41 23
BF 32 0,3 225 35 ø 80 17 225 G 11/4 55 32
BFS 70 0,03 11 41 ø 46 6 G 1/4 19 7
BFS 200,3 12
57 ø 81 15G 3/4 32 18
BFV 20 54 ø 77 14
EF 1000,4 107
3617
ø 60ø 28 G 1 46 25
EFK 10 37 ø 38
EF 2000,5 131
39 17 ø 67ø 34 G 11/4 55 32
EFK 20 40 19 ø 47
EF 3000,7 155
44 18 ø 75ø 42 G 11/2 60 40
EFK 30 41 19 ø 54
EF 4000,8 187
48 18 ø 93ø 53 G 2 75 50
EFK 40 46 22 ø 66
EF 5001,4 218
58 20 ø 120ø 67 G 21/2 90 65
EFK 50 51 24 ø 83
EF 6001,6 256
69 22 ø 140ø 82 G 3 105 80
EFK 60 55 26 ø 96
FEF 00 0,17 62 48 ø 50 ø 45 ø 28
FEF 10 0,23 98 54 ø 83 ø 76 ø 49
Dimensions
Filler nozzle and filler strainer only available as unit
Spare Parts
Dimensions
BF 8-32
EFK 1-6 FEF 0 and FEF 1
BFS 7… /BFS 20…
EF 1-6
BFV 20
lockable design on request
hole pattern FEF 0 hole pattern FEF 1
Quality and StandardisationThe development, manufacturing and assembly of EPE Industrial filters and filter elements is performed withinthe guidelines of a certified quality management system according to DIN EN ISO 9001.The calculation of strength and the filter tests are done in compliance to actual pressure vessel regulations and national & international standards.A filter inspection by accredited certification bodies(e.g. TÜV, GL, LRS, LRIS, ABS, BV, DNV, DRIRE, UDT etc.) is possible on request.
Installation, Starting and Maintenance
Filter InstallationFlange filter assembly at mounting device or in reservoir opening.
StartingSwitch on system pump and start system. Pay attention to flow noiseat breather filter. If flow noise can be heard, check size selection in accordance to air flow rate (Initial flow resistance < 20 mbar).
MaintenanceBE, B7SL45/21... : If a vacuum or overpressure of 0,02 bar is displayed,the spin on filter 80.45/21 needs to be replaced.All other breather filters do not have any maintenance indicators.We therefore recommend to check or to replace breather filters in regularly periods according to following table:
Filter Element ServiceTLF:open cover (Part 1) by unscrewing wing nut (Part 2). Replace (H..SL, P and VS...) or clean (G...material) filter element in the case of visual contamination.Insert filter element (Part 4) in filter housing and refit cover while tighten wing nut hand screwed.
BF, BS, BE, B 7SL... :unscrew spin-on filter (Part 1) and refit new one with seal (Part 2)hand screwed.
BF 8-32, BFS, BFV... :unscrew filter, replace completely and screw on again using a newfibre seal (Part 10).
EF... :unscrew cover (Part 1)and replace filter disc (Part 5).
EFK... :unscrew cover (Part 1) and check strainer (Part 4) for contamination, clean if necessary, check seal (Part 9) for damage and refit cover.
FEF... :open cover (Part 1) , release from security chain and replace, close security chain.
Check filler filters during maintenance for contaminationand clean if necessary.
filter application environmentalconditionsaverage dustconcentration
39 - 25 mg/m 4000 h
3000 h
3000 h
350 - 80 mg/m330 - 100 mg/m
service interval
general mechanicalengineering
heavy industry
mobile hydraulics
10
Quality assured!
Industrial Filters · Accumulators
®
Filters for tank mounting
Efficient filtration of air
Air breather filters with changeable spin-on filters (BF and BE)
Combined air breather and filler filters (TLF, EF, EFK, FEF, FES, BE)
Flange mounted filters
Low pressure drop
Special high efficient filter media, also for water absorbing
Breather FiltersTLF I..., TLF II...,TLF III...,
BF...,BE...,EF...,EFK...
Air flow up to 3500 m³/hConnection up to DN 250
K. & H. Eppensteiner GmbH & Co. KGHardtwaldstraße 43 · D-68775 Ketsch/Rh.Postfach 1120 · D-68768 Ketsch/Rh.Telefon: 0 62 02 / 6 03-0Telefax: 0 62 02 / 6 03-199E-Mail: [email protected]: www.Eppensteiner.de
Industrial Filters · Accumulators
®
Technical modifications reserved! 10/01/10.99/6000
OrderingInformationSelection of filter size:using the computer program"EPE - FILTERSELECT" orperformance characteristicsin this brochure.Special designs available on request.
SizeBF 8-32 EF 1 EFK 1 EF 2 EFK 2 EF 3 EFK 3 EF 4 EFK 4 EF 5 EFK 5 EF 6 EFK 6 FEF 0 FEF 1
BFS 7, BFS 20BFV 20
Part Qty. Designation Material Part No.
please indicate ordering information "Filter Assembly"
please indicate ordering information "Filter Assembly"
please indicate ordering information "Seal Kit"
1 1 Cover Various
Steel
Aluminium
Various
Sika-B 200
Spring steel
4.8
4.8
Buna N
Fibre
Fibre
2 1 Flange
3 1 Filler nozzle 3650 3658 3659 3660 3661 3662
4 1 Filler strainer 3651 3663 3664 3665 3666 3667 5779 5767
5 1 Filter plate 5635 5636 5637 5638 5639 5640
6 1 Locking ring 5641 5642 5643 5644 5645 5646
7 3 Oval head screw 5783
8 6 Socket head cap screw 5770
9 1 Seal
Seal
Seal
10 1
11 1
Filter TypeBF = Breather filter
BFV = Breather withBypass ValveBreather withFilter ElementBreather andFiller Filter
Breather andFiller Filter
Filler Filter
BFS =
FEF =
EF =
EFK =
Nominal Size8; 15; 20; 25; 32
20
72001
1-252-323-404-505-656-80
Filtration GradeS 130
S 130
P5 P10 P25
S10 S20 S40
G 130
Seal
F = Fibre (standard)
0 = without
P = Buna N
Material0 = standard
Add. Info.0 = without5 = silicon freeQ = dip stick BF, EF and EFK onlyZ = inspection certificate
Filter Assembly BF 15 S 130 – F 0 0
D BF 15 S 130 – F 0Seal Kit
Size Weight in kg A B C D E F G SW NW
BF 81 0,05 55 10 20 ø 30 9 55 G 1/4 19 9
BF 15 0,1 10512
25 ø 50 12 105 G 1/2 27 13
BF 20 0,15 140 26ø 60
13 140 G 3/4 35 18
BF 25 0,2 17516
27 15 175 G 1 41 23
BF 32 0,3 225 35 ø 80 17 225 G 11/4 55 32
BFS 70 0,03 11 41 ø 46 6 G 1/4 19 7
BFS 200,3 12
57 ø 81 15G 3/4 32 18
BFV 20 54 ø 77 14
EF 1000,4 107
3617
ø 60ø 28 G 1 46 25
EFK 10 37 ø 38
EF 2000,5 131
39 17 ø 67ø 34 G 11/4 55 32
EFK 20 40 19 ø 47
EF 3000,7 155
44 18 ø 75ø 42 G 11/2 60 40
EFK 30 41 19 ø 54
EF 4000,8 187
48 18 ø 93ø 53 G 2 75 50
EFK 40 46 22 ø 66
EF 5001,4 218
58 20 ø 120ø 67 G 21/2 90 65
EFK 50 51 24 ø 83
EF 6001,6 256
69 22 ø 140ø 82 G 3 105 80
EFK 60 55 26 ø 96
FEF 00 0,17 62 48 ø 50 ø 45 ø 28
FEF 10 0,23 98 54 ø 83 ø 76 ø 49
Dimensions
Filler nozzle and filler strainer only available as unit
Spare Parts
Dimensions
BF 8-32
EFK 1-6 FEF 0 and FEF 1
BFS 7… /BFS 20…
EF 1-6
BFV 20
lockable design on request
hole pattern FEF 0 hole pattern FEF 1
Quality and StandardisationThe development, manufacturing and assembly of EPE Industrial filters and filter elements is performed withinthe guidelines of a certified quality management system according to DIN EN ISO 9001.The calculation of strength and the filter tests are done in compliance to actual pressure vessel regulations and national & international standards.A filter inspection by accredited certification bodies(e.g. TÜV, GL, LRS, LRIS, ABS, BV, DNV, DRIRE, UDT etc.) is possible on request.
Installation, Starting and Maintenance
Filter InstallationFlange filter assembly at mounting device or in reservoir opening.
StartingSwitch on system pump and start system. Pay attention to flow noiseat breather filter. If flow noise can be heard, check size selection in accordance to air flow rate (Initial flow resistance < 20 mbar).
MaintenanceBE, B7SL45/21... : If a vacuum or overpressure of 0,02 bar is displayed,the spin on filter 80.45/21 needs to be replaced.All other breather filters do not have any maintenance indicators.We therefore recommend to check or to replace breather filters in regularly periods according to following table:
Filter Element ServiceTLF:open cover (Part 1) by unscrewing wing nut (Part 2). Replace (H..SL, P and VS...) or clean (G...material) filter element in the case of visual contamination.Insert filter element (Part 4) in filter housing and refit cover while tighten wing nut hand screwed.
BF, BS, BE, B 7SL... :unscrew spin-on filter (Part 1) and refit new one with seal (Part 2)hand screwed.
BF 8-32, BFS, BFV... :unscrew filter, replace completely and screw on again using a newfibre seal (Part 10).
EF... :unscrew cover (Part 1)and replace filter disc (Part 5).
EFK... :unscrew cover (Part 1) and check strainer (Part 4) for contamination, clean if necessary, check seal (Part 9) for damage and refit cover.
FEF... :open cover (Part 1) , release from security chain and replace, close security chain.
Check filler filters during maintenance for contaminationand clean if necessary.
filter application environmentalconditionsaverage dustconcentration
39 - 25 mg/m 4000 h
3000 h
3000 h
350 - 80 mg/m330 - 100 mg/m
service interval
general mechanicalengineering
heavy industry
mobile hydraulics
10
Quality assured!
Industrial Filters · Accumulators
®
Filters for tank mounting
Efficient filtration of air
Air breather filters with changeable spin-on filters (BF and BE)
Combined air breather and filler filters (TLF, EF, EFK, FEF, FES, BE)
Flange mounted filters
Low pressure drop
Special high efficient filter media, also for water absorbing
Breather FiltersTLF I..., TLF II...,TLF III...,
BF...,BE...,EF...,EFK...
Air flow up to 3500 m³/hConnection up to DN 250