1 State of delivery Setting the calendar format Setting ... · State of delivery To activate the...
Transcript of 1 State of delivery Setting the calendar format Setting ... · State of delivery To activate the...
Activation of the device
State of delivery
To activate the device, press the SET and the READ buttons simultaneously for more than 3 seconds. The following calendar format will appear: dd.mm.yyyy
• After 60 seconds without pressing buttons – the device falls back to sleep mode. Start again from the beginning.
Note:
You receive the Fridge-tag® 2 in „Sleep Mode“. The display (LCD) is blank.
1
2
2
2
yyyd y__d
3
Information: The clock function operates as a 24 hour clock: e.g. 1:47 pm = 13:47
Setting the time
The first digit is flashing
1) Press READ until „1 “ appears as the first digit
2) Press SET to save the digit
The second digit is flashing
1) Press READ until „3“ appears as the second digit
2) Press SET to save the digit
Setting the time to 13:47
10
2
01 206 9 1 2
0001
11
2
01 206 9 1 2
0013
Note: The fifth and sixth digit is set automatically.
2) Press SET to save the digit
Setting the calendar format
2) Then press SET to save the calendar format
1) Press READ to change the calendar format
The first digit is flashing
The second digit is flashing
The third digit is flashing
The fourth digit is flashing
The seventh digit is flashing
1) Press READ until „1 “ appears as the first digit
1) Press READ until „6“ appears as the second digit
1) Press READ until „0“ appears as the third digit
1) Press READ until „9“ appears as the fourth digit
1) Press READ until „1 “ appears as the seventh digit
Setting the date
2) Press SET to save the digit
2) Press SET to save the digit
2) Press SET to save the digit
The eighth digit is flashing
1) Press READ until „2“ appears as the eighth digit
2) Press SET to save the digit
9
2
01 206 9 12
After setting the date, the first digit of the time will start flashing.
The date is now set to: 16.09.2012
Press SET to save the calendar format
After setting the calendar format, the first digit of the date will start flashing.
Use the READ button to adjust the number. Each time you press the READ button, the number in the flashing digit will increase by 1. If you press READ more than you were supposed to, continue pressing the READ button until you obtain the desired number. Use the SET button to confirm the number.
Option 1: Setting the date format to: dd.mm.yyyy
Option 2: Setting the date format to: mm.dd.yyyy
Setting the date to 16th of September 2012 (16.09.2012; dd.mm.yyyy):
3
3
4
5
6
7
8
2
yyy_ ydd_
2
yyyd y__d
2
21020111
2
210211 06
2
2101 206 9
2) Press SET to save the digit
2
210211 60
2
201 206 9 1
2
yyyd y__d
2
yyyd y__d
2
yyyd y__d
20160121_V1
The activation is completed.
If you made a mistake or wish to change the settings of the date, the time or the temperature measurement unit please proceed as follows:
The screen will display “SET DATE” indicating that you have entered the change mode and you may choose the item to be changed:
„SET DATE“ is displayed on the screen.
Then repeat the steps as described in chapter „Setting the date and time”.
The activated Fridge-tag® 2 L must be placed immediately in its predetermined location. It is recommended and important to place the device as close to the supervised goods as possible to ensure an optimal temperature observation. Please do not place the device into a Freezer as the screen will freeze and the battery will lose power prematurely.
Information: During max. 1 minute after activation no temperature is displayed on the screen.
Press SET to access the menu „SET DATE“
2) ...then press SET to access the menu „CELS FAHR“
For more information about the right positioning of the Fridge-tag® 2 L visit: www.berlinger.com/Fridge-tag2L
Note: After the adjustment has been done, the Fridge-tag® 2 L will be locked for 24 hours from the following midnight (e.g. changes on the 15th Sep.: device locked from 00:01 am on the 16th until 00.01 am on the 17th).
Berlinger & Co. AGMitteldorfstrasse 29608 GanterschwilSwitzerland
Tel.: +41 71 982 88 11Fax: +41 71 982 88 [email protected] www.berlinger.com
Information: Time and date adjustments have no effect on the alarm recording. Adjustments can only be made for date and time settings and for chan-ging the temperature measurement unit. Once the device is activated, it cannot be stopped. The number of time adjustments during the same day is unlimited.
The time is now set to: 13:47
Placing the Fridge-tag® 2 L
Mistakes / change settingsCheck also operating manual chapter: „Read and change settings / How to correct setting mistakes“.
The third digit is flashing
1) Press READ until „4“ appears as the third digit
2) Press SET to save the digit
2) Press SET to save the digit
Option 1: change the date or time settings
Option 2: change the temperature unit °C/°F
The fourth digit is flashing
1) Press READ until „7“ appears as the fourth digit.
1) Press and continue to hold SET...
2) ...then press READ shortly...
3) Then release both buttons.
„SET DATE“ is displayed on the screen.
1) Press READ until „CELS FAHR“ is dis-played on the screen...
2
°F
NOTE: If you scroll through the menu and you reach the display of the measuring mode again you need to restart from the begining byaccessing the menu. In order to adjust more than one setting (e.g. time & Celsius to Fahrenheit) you must complete each change and return to menu mode for the 2nd change.
The temperature unit is flashing
1) Press READ until the desired unit „°C“ or „°F“appears on the display.2) ...then press SET
to save the temperature measurement unit.
The temperature unit is now changed and the measuring will continue.
12
13
2
01 206 9 1 2
0134
2
01 206 9 1 2
1347
15
QUIC
K IN
FO
Set up of Fridge-tag® 2 Lwith internal sensor
14