1 Sport-Ident 102 Barry McCashin Edmonton Overlanders Orienteering Club Jan 18, 2009 UofA-BioSci ©...
-
Upload
layne-usilton -
Category
Documents
-
view
224 -
download
2
Transcript of 1 Sport-Ident 102 Barry McCashin Edmonton Overlanders Orienteering Club Jan 18, 2009 UofA-BioSci ©...
1
Sport-Ident 102
Barry McCashinEdmonton Overlanders Orienteering Club
Jan 18, 2009UofA-BioSci
© BGMcC 2009
Part 0: Intro20 slides
2
Objectives
• learn what the SI system does• use OE2003 to build and run an event• use SI Config to program ver7/8
Control stations• learn about “problems” and how to
remedy them
3
AgendaSportident Basics: Intro: system overview: hardware, software Part 1: OE2003: set up an event Part 2A: SI Config: program v7/8 controls (Part 2B: SI manager to program v4/6 controls) Part 3: OE2003: download SI punches Part 4: other programs & topics
4
References
1. Sport Ident Electronic Timing: How-To Manual
Kim Kasperski, EOOC, November 2003
2. OE2002 User Guide Bill Brown, Wessex O.C.(UG W97 v2.11.doc) aka “the Bible”
3. Help file in software (might assist you once you understand the process)
5
Sport Software downloads
Stephan Kramer Sport Software
http://www.sportsoftware.de/support/supp_downloads.html
Hardware Manufacturer: AES Germany (SI Config)
http://www.sportident.com/sportident-english/english.htm
Bill Brown SI manual v2.1.1
http://www.wessex-oc.org
6
Overview 1
Set up an Event:• OE2003 v10.3 + Master Station• Enter Controls, Courses, Classes• Register competitors
After competitor returns:• Download punches• Print results
7
Overview 2
Program Control Boxes (v7/8):
• SI Config 2.02 + Master Station• Regular Control Stations• Special Stations: start, finish, check, clear
8
Overview 2
Program Control Boxes (v4/6):
• SI Manager 9.8 + Master Station• Regular Control Stations• Special Stations: start, finish, check, clear
9
Vocabulary 1
Control Stations:• Master: can program other stations, read SI
punches/read memory in controls• Special: start, finish, clear, check• Controls: what is punched with a finger stick• Time Master: synchronize times of stations• Download: read SI punch>thermal printer or to PC
10
Control Stations
Master Station coupling rod Controls + Special Stations
Download Station + printer Time Master SI(time)Master
11
Vocabulary 2
SI Card 5• finger stick, dibber, punch• 39 memory slots• Color schemes: body and band• 330 ms response
SI Card 6• 64 memory slots• 130 ms response • multi-colored
12
SI Card 5
39 data slots30 control # + Time6 control # only (no time)Start, Finish & Check
When full, may not beep when insert into a controlClear Stn erases all data on punchClear a punch before the raceDO NOT put a CLR station anywhere near the Finish !
13
How it Works 1:
Set up event: OE2003• Basic information (name, date, start time)• Enter controls, courses and classes• Assign classes to courses• Enter names (register people) and put them in a
class
14
How it Works 2
Program Controls (SI Config or SI Manager) and give:
• a task (function): (control, start, finish, etc)• an identity/code (number)• the time/date• (ver4 controls) when to come on and turn off
15
Master Stn
How it Works 2:
#31DateTimeOn Time
#32DateTimeOn Time
#33DateTime On Time
3 Controls
PC SI Config
Inductive coupling
wired
16
How it Works 3
Punching a Control with a finger stick:• copies the control identity and time onto the punch• records the serial number of the finger punch + time
on the Control station(i.e. data transfers in both directions)
• beeps and flashes the LED; process is complete
17
How it Works 3
SI #
Control #31
ID # 31date/time
SI Punch
Both devices have memory storage
18
How it Works 4
Download Finger punch at the finish via a Master station (OE2003)
• the control identity + time of all stations copied from the finger punch into the event database
• event software checks stations against the course list of stations for that competitor’s class
• calculates total time and missed punches• can download and print split times on thermal printer
19
How it Works 4
SI #
ID31-time
ID32-time
ID33-time
Master Stn
SI Punch
PC
OE2003
DataBase
Winners
Splits
Reports:
wired
20
End of Introduction•have been introduced to the system components hardware and software
•know that control stations simply apply a control number and time stamp to the SI punch
•download SI punch data > database
•software checks that the control number sequence matches that of the course you were assigned to
Now will set up an event with OE2003 (single day)