Processing Digital and Analog Signals in Satellite Communications
1 Signals. 2 Signals Introduction Introduction Analog and Digital Analog and Digital.
-
Upload
annabel-anderson -
Category
Documents
-
view
231 -
download
2
description
Transcript of 1 Signals. 2 Signals Introduction Introduction Analog and Digital Analog and Digital.
11
SignalsSignals
22
SignalsSignals
IntroductionIntroduction Analog and DigitalAnalog and Digital
33
IntroductionIntroduction
Information can be in the form of data, Information can be in the form of data, voice, picture, etc.voice, picture, etc.
Internally (in a computer) it is Internally (in a computer) it is represented in the form of a stream of represented in the form of a stream of 1s and 0s1s and 0s
When it is transmitted across network When it is transmitted across network links, it is converted into a form that links, it is converted into a form that transmission media can accepttransmission media can accept– Electromagnetic signalsElectromagnetic signals
44
Analog and DigitalAnalog and Digital
Data and Signals can be represented Data and Signals can be represented in analog or digital formin analog or digital form
AnalogAnalog– Refers to something that is continuousRefers to something that is continuous– A set of specific points of data and all A set of specific points of data and all
possible points betweenpossible points between DigitalDigital
– Refers to something that is discrete Refers to something that is discrete – A set of specific points of data with no A set of specific points of data with no
other points betweenother points between
55
Analog and DigitalAnalog and Digital
Analog and Digital Data :examplesAnalog and Digital Data :examples– Analog dataAnalog data
Human voiceHuman voice A continuous wave is createdA continuous wave is created Converted to analog signalConverted to analog signal
– Digital dataDigital data 0/1 data stored in a computer0/1 data stored in a computer converted into digital signal converted into digital signal
66
Analog and DigitalAnalog and Digital
Analog and Digital SignalsAnalog and Digital Signals Analog signalAnalog signal
– A continuous wave formA continuous wave form– There are infinite values along a path There are infinite values along a path
77
Analog and DigitalAnalog and Digital
Digital signalDigital signal– DiscreteDiscrete– It has a limited number of defined It has a limited number of defined
values (0/1)values (0/1)
88
Analog and Digital SignalsAnalog and Digital Signals
99
Periodic SignalsPeriodic Signals
A periodic signal consists of a A periodic signal consists of a continuous repeated patterncontinuous repeated pattern
The period of a signal The period of a signal (T)(T) is is expressed in secondsexpressed in seconds
1010
Periodic SignalPeriodic Signalss
1111
Aperiodic SignalAperiodic Signalss
Signal has no repetitive pattern
1212
Analog SignalsAnalog Signals
Simple analog signal : a sign wave form
1313
Analog Signals : Sign WaveAnalog Signals : Sign Wave
3 characteristics of a sign wave3 characteristics of a sign wave– AmplitudeAmplitude
The height of the signalThe height of the signal The unit : volt, ampere, wattThe unit : volt, ampere, watt
– Period and frequencyPeriod and frequency The amount of time (in seconds) a signal The amount of time (in seconds) a signal
needs to complete one cycleneeds to complete one cycle Frequency = the number of periods in one Frequency = the number of periods in one
second (number of cycles per second)second (number of cycles per second)
1414
AmplitudeAmplitude
Minimum Amplitude
Maximum Amplitude
t1
Amplitude at time t1
1515
FrequencyFrequency
Frequency is a rate of change Frequency is a rate of change with respect to timewith respect to time
Change in a short span of time Change in a short span of time means high frequencymeans high frequency
Change in a long span of time Change in a long span of time means low frequencymeans low frequency
If a signal does not change at all, If a signal does not change at all, its frequency is zeroits frequency is zero
1616
Period and FrequencyPeriod and Frequency
3 periods in one second Frequency = 3 HzOne second
Period = 1/3 second
1717
PhasePhase
Describes the position of the Describes the position of the waveform relative to time zerowaveform relative to time zero
Phase is measured in degrees or Phase is measured in degrees or radius (360 degrees is 2Pi radius (360 degrees is 2Pi radians)radians)
1818
PhasesPhases
1919
Amplitude ChangeAmplitude Change
2020
Frequency ChangeFrequency Change
2121
Phase ChangePhase Change
2222
Time and Frequency DomainsTime and Frequency Domains
1 secondFrequency = 7 Hz12 1
2
7
2323
Time and Frequency DomainsTime and Frequency Domains
A low frequency signal in the A low frequency signal in the frequency domains corresponds to frequency domains corresponds to a signal with a long period in the a signal with a long period in the time domain and vice versatime domain and vice versa
A signal that changes rapidly in the A signal that changes rapidly in the time domain corresponds to high time domain corresponds to high frequency in the frequency domainfrequency in the frequency domain
2424
ExamplesExamples
2525
Signal with DC ComponentSignal with DC Component
2626
Complex WaveformComplex Waveform
2727
BandwidthBandwidth
2828
Digital SignalDigital Signal
2929
Amplitude, Period, and Phase Amplitude, Period, and Phase
for a Digital Signalfor a Digital Signal
3030
Bit Rate and Bit IntervalBit Rate and Bit Interval
3131
Harmonics of a Digital SignalHarmonics of a Digital Signal
3232
Exact and Significant Exact and Significant Spectrums Spectrums
3333
Bit Rates and Significant Bit Rates and Significant Spectrums Spectrums
3434
Bandwidth and Data RateBandwidth and Data Rate
3535
ExampleExample
3636