H.S.H.S.

1

Proposals of WLTC versions for low powered vehicles

Heinz Steven

09.03.2012

WLTP

H.S.H.S.Content

2

• Structure of the additional in-use data from India and Overview of the whole Indian in-use data,

• Analysis of positive acceleration percentiles,

Per vehicle,

Per region,

• Analysis of relative positive accelerations,

• Proposal for vehicle classes,

• Summary and conclusions

H.S.H.S.Vehicle classification

3

• Based on the analysis results of the acceleration performance of the vehicles in the WLTP in-use database (see WLTP-DHC-TC06032012-

02_Analyses_related_to_low_powered_vehicles.pptx) the following draft vehicle classification was used for the cycle development:

Class 1: pmr < 21 kW/t,

Class 2: 21 kW/t <= pmr < 35 kW/t,

Class 3: pmr >= 35 kW/t.

• The 6 vehicles in class 1 are all from India, the 5 vehicles in class 2 are from India (3), Japan (1) and Europe (1).

• The in-use database for class 1 vehicles contains short trips from the low and the medium speed part, the in-use database for class 2 vehicles contains ST from low, medium and high speed parts.

H.S.H.S.Development approach

4

• The cycle for class 3 vehicles is WLTC version 4 as used for validation 1b consisting of the 4 speed parts low, medium, high and extra high.

• The following approach was used for the development of complementary cycles for class 1 and 2 vehicles:

According to the in-use databases the extra high speed part was skipped for class 2 vehicles and the extra high speed part as well as the high speed part were skipped for class 1 vehicles.

The structure of the cycle parts in terms of cycle duration, idle time percentages and number and duration of short trips were taken over from WLTC version 4.

The vehicle speed - acceleration distributions for class 1, class 2 and class 3 were calculated from the corresponding parts of the WLTP database.

H.S.H.S.Development approach

5

This calculation was performed with equal weightings for the individual vehicles within the 3 classes.

The class 3 distributions were used for a comparison with the WWW database distributions.

The short trips for the class 1 and class 2 cycles were then chosen from the database on the basis of a least square analysis. In this analysis only positive accelerations were taken into account.

Further modifications on the candidate short trips were necessary in order to bring the distributions closer to the database distributions and in order to make sure that the acceleration values would be within the limits defined by the speed dependent acceleration distributions (<= a_95).

But it must be pointed out, that no smoothing of microtransients was applied so far.

H.S.H.S.Results

6

• The following conclusions could be drawn from initial analysis results related to low powered vehicles:

It must clearly be stated that a separate cycle version for the low speed part is required for vehicles with power to mass ratios (pmr) below 20 kW/t. Since this separate version cannot be derived from the existing WLTC because only 2 vehicles belong to this class, more in-use data was required for the development.

It could well be that vehicles with pmr below 30/35 kW/t would also need cycle versions with reduced accelerations for the low and medium speed parts but since there was only 1 vehicle in this pmr class no general conclusions could be drawn without additional in-use data.

• In the meantime India delivered additional in-use data for 9 vehicles with pmr between 9.1 and 29.1 kW/t.

H.S.H.S.

-3.0

-2.5

-2.0

-1.5

-1.0

-0.5

0.0

0.5

1.0

1.5

2.0

2.5

3.0

0

10

20

30

40

50

60

70

80

90

100

110

120

0 60 120 180 240 300 360 420 480 540 600

acce

lera

tion

in m

/s²

vehi

cle

spee

d in

km

/h

time in s

Speed in km/h

acc in m/s²

WLTC LPV Class 1, ver 1.2

Class 1, low speed part

7Figure 1

H.S.H.S.

-3.0

-2.5

-2.0

-1.5

-1.0

-0.5

0.0

0.5

1.0

1.5

2.0

2.5

3.0

0

10

20

30

40

50

60

70

80

90

100

110

120

600 660 720 780 840 900 960 1,020 1,080 1,140 1,200

acce

lera

tion

in m

/s²

vehi

cle

spee

d in

km

/h

time in s

Speed in km/h

acc in m/s²

WLTC LPV Class 1, ver 1.2

Class 1, medium speed part

8Figure 2

H.S.H.S.

-3.0

-2.5

-2.0

-1.5

-1.0

-0.5

0.0

0.5

1.0

1.5

2.0

2.5

3.0

0

10

20

30

40

50

60

70

80

90

100

110

120

0 60 120 180 240 300 360 420 480 540 600

acce

lera

tion

in m

/s²

vehi

cle

spee

d in

km

/h

time in s

Speed in km/h

acc in m/s²

WLTC LPV Class 2, ver. 1.2

Class 2, low speed part

9Figure 3

H.S.H.S.

-3.0

-2.5

-2.0

-1.5

-1.0

-0.5

0.0

0.5

1.0

1.5

2.0

2.5

3.0

0

10

20

30

40

50

60

70

80

90

100

110

120

600 660 720 780 840 900 960 1,020 1,080 1,140 1,200

acce

lera

tion

in m

/s²

vehi

cle

spee

d in

km

/h

time in s

Speed in km/h

acc in m/s²

WLTC LPV Class 2, ver. 1.2

Class 2, medium speed part

10Figure 4

H.S.H.S.

-3.0

-2.5

-2.0

-1.5

-1.0

-0.5

0.0

0.5

1.0

1.5

2.0

2.5

3.0

0

10

20

30

40

50

60

70

80

90

100

110

120

130

1,000 1,060 1,120 1,180 1,240 1,300 1,360 1,420 1,480 1,540 1,600

acce

lera

tion

in m

/s²

vehi

cle

spee

d in

km

/h

time in s

Speedinkm/h

acc inm/s²

WLTC LPV Class 2, ver. 1.2

Class 2, high speed part

11Figure 5

H.S.H.S.Comparison of distributions with DB

12

• The mentioned modifications were made in order to get a better fit with the database distributions.

• The following figures show the corresponding comparisons.

• The fit is generally equally good as for the WLTC version 4 and the WWW database distributions.

• The latter are in good accordance with the class 3 distributions, at least for the low and medium speed parts.

H.S.H.S.

0%

10%

20%

30%

40%

50%

60%

70%

80%

90%

100%

0 10 20 30 40 50 60 70

cum

freq

uenc

y

vehicle speed in km/h

database, class 1

database, class 2

database, class 3

proposal class 1

proposal class 2

WLTC version 4, low

WWW, low

low speed part

Vehicle speeds, low speed part

13Figure 6

H.S.H.S.

0%

10%

20%

30%

40%

50%

60%

70%

80%

90%

100%

0.0 0.5 1.0 1.5 2.0

cum

freq

uenc

y

acceleration in m/s²

database, class 1

database, class 2

database, class 3

proposal class 2

proposal class 1

WLTC version 4, low

WWW, low

low speed part

Accelerations, low speed part

14Figure 7

H.S.H.S.

0%

10%

20%

30%

40%

50%

60%

70%

80%

90%

100%

0 10 20 30 40 50 60 70 80

cum

freq

uenc

y

vehicle speed in km/h

database, class 1

database, class 2

database, class 3

proposal class 1

proposal class 2

WLTC version 4, medium

WWW, medium

medium speed part

Vehicle speeds, medium speed part

15Figure 8

H.S.H.S.

0%

10%

20%

30%

40%

50%

60%

70%

80%

90%

100%

0.0 0.5 1.0 1.5 2.0

cum

freq

uenc

y

acceleration in m/s²

database, class 1

database, class 2

database, class 3

proposal class 2

proposal class 1

WLTC version 4, medium

WWW, medium

medium speed part

Accelerations, medium speed part

16Figure 9

H.S.H.S.

0%

10%

20%

30%

40%

50%

60%

70%

80%

90%

100%

0 10 20 30 40 50 60 70 80 90 100 110

cum

freq

uenc

y

vehicle speed in km/h

database, class 2

database, class 3

proposal class 2

WLTC version 4, high

WWW, high

high speed part

Vehicle speeds, high speed part

17Figure 10

H.S.H.S.

0%

10%

20%

30%

40%

50%

60%

70%

80%

90%

100%

0.0 0.5 1.0 1.5 2.0

cum

freq

uenc

y

acceleration in m/s²

database, class 2

database, class 3

proposal class 2

WLTC version 4, high

WWW, high

high speed part

Accelerations, high speed part

18Figure 11

H.S.H.S.Proposal for vehicle classes

19

• Based on the analysis results the following amended draft vehicle classification is proposed (square brackets means to be discussed and decided):

Class 1: pmr < [21] kW/t,

v_max < [70] km/h, low speed part with highly reduced accelerations,

v_max >= [70] km/h, low and medium speed parts with highly reduced accelerations.

Class 2: [21] kW/t <= pmr < [35] kW/t,

v_max < [90] km/h, low and medium speed parts with reduced accelerations,

v_max >= [90] km/h, low, medium and high speed parts with reduced accelerations.

H.S.H.S.Proposal for vehicle classes

20

Class 3: pmr >= [35] kW/t,

v_max < [135] km/h, low, medium and high speed parts only,

v_max >= [135] km/h, all parts

• This proposal is intended as starting point for the discussion and needs to be further evaluated.