*Module 4: Start Build

Start Build

Objectives*Welcome to the Cayuse424 Start Build module.In this module you will learn how to use Cayuse424 to start building a new grant proposal.

Start Build

Start Build Activities*Start Build activities involve:Setting up a Professional ProfileCreating a New Grant ProposalCompleting the Form Set (non-Budget)

Start Build

*Professional Profiles

Start Build

Basic Concepts*Professional Profiles capture and store data about Principal Investigators, Key Personal, Other Significant Contributors, AORS, Signing Officials, etc.Before you create a grant application you must set up a Professional Profile for the Principal Investigator who is named in the grant.

Start Build

Basic Concepts*Cayuse424 provides the ability to create Professional Profiles quickly and easily.Information stored in the Professional Profile is autofilled into the grant proposal once that individual is named as a PI, Senior/Key Person or Authorized Rep.Profiles stored in Cayuse424 can be shared with others and used multiple times.Multiple profiles can exist for one individual.

Start Build

Basic Concepts*After you create a profile for the PI you must then set up Professional Profiles for all Key Personnel and Other Significant Contributors named in the grant proposal if a profile has not already been created for them (this can be done after you create the proposal).

Start Build

Creating a Professional Profile*To create a Professional Profile, login to Cayuse424 and click People.

Start Build

Click on the icon.

Creating a Professional Profile*

Start Build

Creating a Professional Profile*Enter First and Last NameClick the Create New Profile button

Start Build

Creating a Professional Profile*Complete the following fields:Name DegreesEnter Degrees (three maximum, separated by commas).If NSF application, fill out NSF Degree Type and Degree YearDemographics

Start Build

Creating a Professional Profile*Biosketches:A Biosketch is required for all Key Personnel and Other Significant Contributors.Biosketches can be added at any time prior to the electronic submission of the proposal.To upload a Biosketch, click icon.

Start Build

Creating a Professional Profile*Biosketches:Type in a name for the Biosketch and click NextClick Browse to locate PDF version of Biosketch youve previously created.Click Next.Repeat for Source (Word) version of Biosketch (optional).Click Done.

Start Build

Creating a Professional Profile*A PDF and source version of the Biosketch are now stored on the server for use in proposals and later edits.Multiple Biosketches can be created and stored in each profile.Once Biosketches are stored they can be easily attached to the proposal on the Senior/Key Persons page.

Start Build

Creating a Professional Profile*Once the basic profile information is entered, the Professional Profile must be affiliated with an institution.This is achieved by linking the Professional Profile to an Institutional Profile.Once an individual (Profile) is associated with an institution, basic institutional information (e.g., fringe rates) can be autofilled into that individuals Professional Profile.

Start Build

Creating a Professional Profile*Institutional Affiliation:To affiliate the Professional Profile with an institution, click the icon.

Start Build

Creating a Professional Profile*Select the Institution the individuals Professional Profile is affiliated with using the drop down menu.

Start Build

Creating a Professional Profile*The Profile is now linked to an institution.Default information in that Institutions Profile can now be autofilled into the Professional Profile.Click the hyperlink to display each section of the profile.

Start Build

Creating a Professional Profile*Contact Info:Contact Info for the affiliated institution is displayed.You may edit autofilled information, if required, and complete remaining contact fields.

Start Build

Creating a Professional Profile*eRA Role:Click appropriate box to indicate eRA Role.

Start Build

Creating a Professional Profile*Department/Division/Title:Enter as appropriate.

Start Build

Salary/Appointment Type:Enter Employee ID (optional), Appointment Type (months), and SalaryIf Salary/Appointment type is not entered, Cayuse424 will not be able to autofill and auto-calculate salary on the budget pages.

Creating a Professional Profile*

Start Build

Creating a Professional Profile*Salary and Fringe Worksheet:Base Fringe Rate and Fringe Rate Total from the Institutional Profile can be imported by clicking on the Import Institutional Rates button.To add additional Fringe Rates click New Row and follow system prompts.

Start Build

Creating a Professional Profile*Routing Profile:Used when Routing is turned on.Next Reviewer: Used when PI requires a specified individual to be the next reviewer during the routing process. Next reviewer can be changed or disabled.Add Delegate: Used to specify a delegate when PI is unavailable to review proposal(s). Delegates have all review powers of PI. Multiple delegates can be added. Any delegate can be removed.

Start Build

Creating a Professional Profile*Managing Professional Profile Permissions:Go to the Professional Profile whose permissions you wish to manage.Click the Permissions icon to manage that profiles permissions.

Start Build

Creating a Professional Profile*Managing Professional Profile Permissions:Once a Professional Profile is established, permissions must be specified.The creator of a Professional Profile is automatically granted all permissions associated with using that profile.The profile creator can share the profile with other users by granting appropriate permissionsPermissions can be changed or removed.

Start Build

Creating a Professional Profile*Grants you the ability to:ListReadRead/WriteAutofillDeleteAllow the User to view a profile on the Professional Profiles list. Allow the User to read the details of a profile.Allow the User to add, change or delete information on a Professional Profile.Allow the User to Autofill the Professional Profile onto an application.Allow the User to delete a Professional Profile.When checked, this permission:

Start Build

Creating a Professional Profile*Change PermissionsAdd User/GroupRemove/User GroupAllow the User to change security permissions on a Professional Profile.Allow the User to add other users to the Professional ProfileAllow the User to remove a user or group.When checked, this permission:Grants you the ability to:

Start Build

Creating a Professional Profile*Managing Professional Profile Permissions:To grant permission(s) to other Cayuse424 users click Add user/group

Start Build

Creating a Professional Profile*Managing Professional Profile Permissions:Scroll down and click G (user)

Start Build

Creating a Professional Profile*Managing Professional Profile Permissions:G (user) represents a group that includes all Cayuse424 users.Default permissions are added that allow all users to:See the Professional Profile on a list.Read the contents of the profile.Autofill contents from the profile into their grant proposals.You may unclick default permissions as desired.

Start Build

Creating a Professional Profile*Managing Professional Profile Permissions:You can grant individual users specific permissions regarding the Professional Profile.Click Add user/groupScroll and select an individual userOnce the user is added, check or uncheck permissions, as desired

Start Build

Creating a Professional Profile*Managing Professional Profile Permissions:You can change permissions at any time by clicking or un-clicking the check boxes.You can also delete user(s) from your permissions by clicking adjacent to the users name.

Start Build

Creating a Professional Profile*Now that the profile is established the individuals Cayuse424 user name must be linked to the profile. To do so:Click Preferences or Admin tab (if applicable)Click Link User to Profile.

Start Build

Scroll down to locate User AccountClick User Account

Select User Profile

Cayuse424 reports a successful link.Creating a Professional Profile*

Start Build

Creating a Professional Profile*Once you have established a Professional Profile for the PI to be named in the grant proposal, you are ready to create a new grant proposal.

Start Build

*Create New Grant Proposal

Start Build

Create New Proposal*To create a new Grant Proposal:Click Proposals tab.Click New Proposal button.

Start Build

Create New Proposal*Indicate Budget Type.Select the Opportunity.

Type internal Proposal Name.Select Principal Investigator using the drop-down menu.

Start Build

Create New Proposal*Choose # of Budget PeriodsSelect Validation Type using drop-down menu. This setting determines which agency validations will be used on the form set.

Start Build

Create New Proposal*When you click Create Proposal Cayuse424 creates the SF424 form set required by the opportunity.All forms are listed in the navigation bar on the left of the screen.

Start Build

Create New Proposal*The page numbers are links to form pages.The checkboxes control which forms are submitted electronically to the agency.Mandatory forms are automatically checked and cannot be unchecked.Optional forms can be checked to include in the proposal submission (e.g. Detailed vs. modular budget pages).

Start Build

Create New Proposal*Naming Your Proposal:Give some thought to how you name your proposal. Consider appropriate conventions that will make your proposal easy to locate once your inventory of proposals grows.Your Contracts and Grants Office may suggest a naming convention.Once you name your proposal, you can easily rename it by clicking on the name field and typing in a new title.

Start Build

Managing Proposal Permissions*Proposal Permissions are separate and distinct from Professional Profile permissions. As soon as you create your new proposal, you should manage your proposal permissions.Click the icon at the top of the proposal.

Start Build

Managing Proposal Permissions*Whoever creates the proposal is given full permissions.Only the proposal creator can grant permission(s) to other users.

Start Build

Managing Proposal Permissions*Appropriate proposal permissions must be granted to other users who must have access to the proposal.Typically, that includes:Principal InvestigatorsResearch AdministratorsReviewers

Start Build

Managing Proposal Permissions*When checked, this permission: Grants you the ability to:ListReadRead/WriteAttachBreaklockAllow the User to see the proposal in a list of proposals. Allow the User to read the contents of a proposal.Allow the ability to add, change or delete information on a proposal.Allow the User the ability to attach documents to the proposalAllow the User to gain write access while another user is in the proposal

Start Build

Managing Proposal Permissions*When checked, this permission: Grants you the ability to:

DeletePrintChange PermissionRemove User GroupAllow the User to delete a proposal.Allow the User to print the proposal.Allow the User to change security permissions on a proposal.Allow the User to add other users to the proposal.Allow the User to delete other users from the proposal.SubmitAllow the User to submit a proposal to Grants.gov. Add User Group

Start Build

Managing Proposal Permissions*To grant permission to another user to have access to your proposal:Click Add user/group.Scroll down the user to whom you wish to grant permission(s).Click their user name.Add additional users, as required, then close the Add user group or role window.

Start Build

Managing Proposal Permissions*Default permissions for proposals are: list, read, write, attach, break lock and print. You can modify the default permissions assigned to any user any time by checking or un-checking the appropriate box.

Start Build

*Cayuse424 Features that Support Completion of the Form Set

Start Build

Navigating the Form Set*To navigate the form set:Use the left navigation panelClick page numbers to display the page.

Start Build

Navigating the Form Set*Or click the minus sign to close the left navigation bar, then,Use the drop down menu to navigate form set.

Start Build

IconsVarious icons appear throughout the Cayuse424 web application.Hover your cursor over an icon to determine its function.Click on the icon and Cayuse424 will respond with prompts, forms changes, etc. to support performance of the activity.

*

Start Build

Validation and Error Tracking*When you create a new grant proposal Cayuse424 asks you to specify the validation type, i.e., the agency validation criteria to use to detect errors in your proposal.The default validation type is NIH.If your proposal is not being submitted to NIH, you can reset the validation type to the appropriate agency once the proposal has been created using the drop-down menu.Once reset, that agencys validation rules will be applied to the proposal to identify errors and warnings.

Start Build

Validation and Error Tracking*Cayuse424 keeps a running total of all errors and warnings.Click on Errors/Warnings to display details.When you click on the field description hyperlink Cayuse424 will display the page on which the error occurs and highlight the field.As you correct errors and warnings, the running totals decrease.

Start Build

Validation and Error Tracking*Errors are fatal. Any proposal that is submitted with errors will be rejected by Grants.gov or the granting agency.Warnings are not fatal; but be sure if you are submitting a proposal with warnings that you have determined the warning will not cause the proposal to be rejected or delayed by the granting agency.

Start Build

Autofill*Anytime you see the pencil icon, you can click it to autofill corresponding fields. The autofilled information is sourced from either the Professional or Institutional Profile(s).If profile information changes later in the proposal preparation process, you can autofill again to import the most recent information.When you autofill certain sections Cayuse424 autofills other logically-connected fields.

Start Build

Proposal Lock Feature*

When you are working in a proposal, all other users who have access will see the icon adjacent to that proposal when they log-on to Cayuse424 and click their Proposal tab .The icon signifies that the proposal is locked. Only persons who you have granted permission to break lock can access your proposal in read and write format.Persons without the break lock authority can still open up the proposal in read-only format; but they will not be able to enter data or add attachments.

Start Build

Proposal Lock Feature*In this example, user:Kirk, Rice has permission to break open a locked proposal.Phil, Jones does not have permission to break a lock; but can still open it in read-only format.

Start Build

Proposal Lock Feature*To open a locked proposal, the authorized user who requires access (jcolley) clicks on the proposal name (locked by Prost, Yona).

Start Build

The proposal is opened in read-only format.Locked status is displayed and indicates who locked the proposal.Users who are not authorized to break the lock can review the entire proposal in read-only format.Proposal Lock Feature*

Start Build

Proposal Lock Feature*Users who are authorized to break the lock can do so by clicking the lock icon at the top of the opened proposal and responding to the system prompt.

Start Build

Proposal Lock Feature*The proposal is now open in read/write format.When someone with authority breaks a lock, who ever has locked the proposal is notified and is then locked out. At that point, any data the previous users has not saved will be lost.Open locks with caution. It is best to communicate with the user who has locked the proposal before breaking a lock.

Start Build

Copy/Transform Proposal

*The Copy/Transform feature allows users to:Create a duplicate copy of an existing proposal; or Transform data from an existing proposal into a new grant proposal for a different opportunity. Once copied or transformed the new proposal can be renamed, edited and submitted electronically to Grants.gov.

Start Build

Copy Proposal*To copy an existing proposal, click the icon adjacent to the proposal you wish to duplicate.

Start Build

Copy Proposal*Click Copy Proposal.

Start Build

Copy Proposal*Select Duplicate for Copy Type.Confirm Opportunity Details.Rename proposal if desired, otherwise Cayuse424 will autofill copy and old title.Click Copy.

Start Build

Copy Proposal*Note both the original and a copy are now in your proposals list.Click Copy version to open. Rename and edit data as appropriate.

Start Build

Transform Proposal*To transform an existing proposal into a new grant proposal for a new opportunity, click the icon adjacent to the proposal name.

Start Build

Transform Proposal*Select Transform for Copy Type.Select new Opportunity for which you are repurposing the old proposal.Rename proposal if desired, otherwise Cayuse424 will autofill copy and old title.Click Copy.

Start Build

Transform Proposal*Transformed proposal (S10)Original proposal (RO1)The original proposal remains on your proposal list.The repurposed proposal is added to the list.

Start Build

Transform Proposal*Data from the original proposal is automatically copied into the SF424 form set required for a S10 Opportunity.

Start Build

*Completing the Form Set (Non-Budget)

Start Build

SF424RR: Page 1*When the form set is displayed for the first time:Applicant Organization has been autofilled.Principal Investigator has been autofilled.Complete the forms remaining fields:Click the icon to autofill person to be contacted.

Start Build

SF424RR: Page 2*Use autofill to complete Authorized Representative section.Attach, if necessary:Pre-applicationProject Congressional Districts

Start Build

Use Cayuse424 to add Additional Performance SitesClick icon

SF424RR: Performance Sites*

Start Build

SF424RR: Performance Sites*Respond to the system prompt.

Start Build

SF424RR: Performance Sites*Site #1 is added.

Start Build

SF424RR: Performance Sites*If adding a new site, complete form manually.If adding a site with a pre-existing Institutional Profile, click autofill icon.

Start Build

SF424RR: Performance Sites*Select site to be added using the drop-down menu.

Start Build

SF424RR: Performance Sites*Click Autofill Performance Site 1.

Start Build

SF424RR: Performance Sites*Site information is autofilled onto form.Repeat to add additional sites.

Start Build

SF424RR: Other Project Information*Click appropriate boxes and complete formAttach:Project Summary/ AbstractProject NarrativeBibliography and References CitedEquipmentOther Attachments (up to 10)

Start Build

SF424RR: Key Persons*Cayuse424:Provides the ability to add/autofill/edit and delete Senior/Key Persons.Allows you to add as many Senior/Key Persons as you need.Handles the overflow (8 or 40) by auto-generating an overflow PDF and attaching it to the proposal.Provides a sort button that automatically alphabetizes the final list.Autofills senior/key persons and salary information on the budget pages when you add them on the SF424 Key Persons page.When you add Senior/Key Persons from other institutions, you must affiliate them with their respective Institution(s) before adding them to the grant proposal.

Start Build

SF424RR: Key Persons*To add Senior/Key PersonClick Add/Edit KP.

Start Build

SF424RR: Key Persons*Scroll down Key Persons Autofill Window and select person you wish to add.

Start Build

SF424RR: Key Persons*The Autofill Window displays all information currently stored for that individual.

Start Build

SF424RR: Key Persons*In the Autofill Window you can:Edit Role.Define Budget Periods during which Key Person will be named in the grant. By checking or un-checking the Budget Period boxes you can control whether or not the name and salary information autofills onto the budget page. Edit Salary info.Enter Months (effort).

Start Build

SF424RR: Key Persons*Once you enter Months, Cayuse424 auto-calculates Required Salary, Fringe Benefits and Funds Requested.Using the Autofill Window is a quick and easy way to enter salary and effort for all budget periods; however, you can also input this information manually directly onto individual budget pages for each budget period. (see BUDGET module for details).

Start Build

SF424RR: Key Persons**You can also escalate the key persons salary on the Autofill Window.

Click the icon and follow the system prompts.

Start Build

SF424RR: Key Persons**Enter escalation Rate if different from the institutions default rate.Check all budget periods to which the escalation applies.Click Escalate Key Person Over Selected Budget Periods.

Start Build

SF424RR: Key Persons**Salaries are escalated per specifications.When done editing, click Close Autofill Window.

Start Build

SF424RR: Key Persons*Key Person contact information is added to the Key Persons page.*Key Person/Salary (including escalation) is autofilled on the Budget page.

Start Build

Adding Key Persons On-the-FlyQuickly create a Professional Profile from within the proposalClick on Add/Edit Key PersonClick on Create New Key Person

SF424RR: Key Persons*

Start Build

Adding Key Persons On-the-Fly (cont.)Fill out form and click SaveA Professional Profile will be created in addition to the Key Person being added to the Detailed Budget page and Key Person pageSF424RR: Key Persons*

Start Build

SF424RR: Key Persons*Once you have added all key persons, click the Sort/Senior/Key Persons icon to alphabetize your list.

Start Build

SF424RR: Key Persons*Attach Biosketch(es)Principal InvestigatorSenior/Key PersonsClick Add Attachment and follow system prompts.

Start Build

SF424 RR Budget Pages*Refer to the Cayuse424 BUDGET training module for detailed instructions on how to complete the SF424 RR Budget pages.

Start Build

PHS398 Cover Page Supplement Page 1*Complete form.Use autofill when available.Edit any autofilled information, if necessary.

Start Build

PHS398 Cover Page Supplement Page 2*Complete if Human Embryonic Stems Cells will be used in the proposed project.Click Yes.Enter Cell Line Information, using the drop down menu.

Start Build

PHS 398 Research Plan*Refer to the Cayuse424 SCIENCE training module for detailed instructions on how to create the Research Plan.Refer to the Cayuse424 COMPLETE BUILD training module for detailed instructions on how to upload the Research Plan to the proposal.

Start Build

PHS 398 Checklist Page 1*Complete as appropriate.Click check boxes to change Investigator or Institution.Once checked, fields will allow data entry.

Start Build

PHS 398 Checklist Page 2*If program income is expected during the grant period, check Yes. Once checked, fields will allow data entry.Complete appropriate fields.If no income is expected, leave blank.

Start Build

PHS 398 Cover Letter*If the PHS 398 Cover Letter is marked for inclusion (i.e., the box on the navigation bar is checked), attach the Mandatory Cover Letter.Click Add Attachment.Follow-up system prompts.

Start Build

Targeted/Planned Enrollment*Enter if appropriate.Cayuse424 will:Automatically calculate the totals.Upload this form in PDF format to the Research Plan page of the grant proposal.

Start Build

Inclusion Enrollment Report*Enter if appropriate.Cayuse424 will:Automatically calculate the totals.Upload this form in PDF format to the Research Plan page of the grant proposal.

Start Build

Enrollment Forms*When you complete either or both of the enrollment forms, they are automatically attached to the Research Plan but are not automatically included in the electronic submission to Grants.gov.Click the checkbox(s) on the navigation bar to include the form(s) in your electronic submission.

Start Build

Enrollment Forms*There may be occasions when you have completed the enrollment forms separately; or you have multiple pages of each enrollment form. When this is the case you may override the generated attachment and attach your own document(s).To do so, click Override.

Start Build

Enrollment Forms*Click Browse to locate the PDF files.Repeat for source file.Click Upload.

Start Build

Enrollment Forms*The form has successfully been uploaded.Unclick the inclusion box to ensure your uploaded forms are submitted, rather than the generated form.

Start Build

Enrollment Forms*You can cancel this action and use the auto-generated attachment. To do so:Click Revert.

Start Build

Enrollment Forms*Click Delete to remove your attachment.

Start Build

Enrollment Forms*The generated attachment(s) is inserted.Make sure the inclusion box is still checked to ensure that the generated attachment will be included in your electronic submission.

Start Build

Conclusion*This concludes the Start Build module.In this module you learned how to:Create Professional ProfilesCreate a new grant proposalUse Cayuse424 features and functions to complete the (non-budget) SF424 RR form set.

Start Build

*******************************************************

*

*

**

*

*

*

*

*

***********

*

*

*

*

*

*

*

*

*

*

*

*

*

***********

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*