1 LISTEM X-RAY MODEL REX-525RF XRAY SYSTEM REXC-525RF - High Frequency X-ray Generator Controller...

1

LISTEM X-RAY

MODEL REX-525RF XRAY SYSTEMREXC-525RF - High Frequency X-ray Generator Controller

with APR, AEC

LTN-25 - Fluoroscopic X-ray Tube Unit, Rotating Anode

BLD-150RK - Manual Collimator, Max 150kVp

BLD-150FK - Motorized Collimator, Max 150 kVp with Auto

Collimation

SFC-31 - Floor to Ceiling Mounted Tube Stand

DMT-80A II - 90 /-15 Tilting Table with Two-way Sliding Table

Top with Ion Chamber

SFD-4II - Motorized Rear Loading Type Spot Film Device

LIF-06 - 6" Image Intensifier

CS84201 - CCD Camera

HM1423CKR - 14" Monitor

MC-14 - Monitor Cart

BS-20 - Vertical Bucky Stand with Ion Chamber

With AEC + Auto Collimation

REXC-325R- High Frequency X-ray Generator Controller with APR, AEC

LTN-25- Three Phase, 380V, 50 Hz, 32kWRadiographic X-ray Tube Unit, Rotating AnodeMax 125kVp, 1.0mm2.0mm Focal Spot, 140kHU

BLD-150RK - Manual Collimator, Max 150kVp

SFC-31R - Floor to Ceiling Mounted Tube Stand

KOB-III - Four-Way Floating Top Bucky Table with Ion Chamber

HVC-5 - High Voltage Cable, 5m Long Pair with Terminals


WITH AEC

MODEL REX-325R XRAY SYSTEM

REXC-525R- High Frequency X-ray Generator

Controller with APR, AEC

REXH-525R- 500mA/125kVp High Frequency X-ray

Generator with Power Deck and High Tension

LTN-25 - Radiographic X-ray Tube Unit, Rotating

Anode

BLD-150RK- Manual Collimator, Max 150kVp

SFC-31R - Floor to Ceiling Mounted Tube Stand

KOB-III - Four-Way Floating Top Bucky Table with Ion

Chamber

HVC-5 - High Voltage Cable, 5m Long Pair with

Terminals


With AEC

MODEL REX-525R XRAY SYSTEM

2

SPECIFICATION:

REX-2.5- 120mAs/125kVp High Frequency X-ray Generator with Tube Stand and Mobile Cart

LTY-26 M - Integrated Radiographic X-ray Tube Unit in Mono Tank Max 125kVp, 1.2mm Focal Spot, 50,000H.U

BLD-150RK - Manual Driven Collimator

WITH AEC

MODEL MOBIX-1000 PHANTOGRAPHIC ARM MOBILE

SPECIFICATION:

REX-2.5 - 120 mAs/125Vp High Frequency X-ray

Generator

DF-151SBR

-Integrated Radiographic X-ray Tube Unit in Mono Tank

- Max 125kVp, 0.5/1.5mm Focal spot, 45,000H.U.

LIC-09 - 9" Image Intensifier

LCC-RD - CCD Camera with Last Image Hold,

Rotation, 4 Memories

HM1723CKR - 17" Monitor

MC-17 - Monitor Cart

.

MODEL C-ARM MOBILE X-RAY TV UNIT (MODEL: SM-20HF)

The quality of processing medical film not affects the processing quality only, but affects us that we can provide doctors the most correct image information for patient, or not. Since this is related with humans life, during designing this processor we treat the high quality of processing the same as that we deal with a person life

Features:

- Fast Speed yet Smart Body

- Complete Auto Control Processing Program

- High Processing Quality

- Film Output Selectable- Easy Maintenance

- Hi-efficient Dryer

- Advanced and Reliable Roller Transport System- High Working Reliability

HUQ PRODUCTS

MODEL HQ-450XM

2

3

Features:All plastic parts of 450XT processor chemical tank and external cover are made by mold. Thus manufacture and technique of whole machine reaches an advanced level in current world and it is the sole product which is made by mold in all brands of China. Another feature of this machine is that it is the breakthrough among similar products in the world because it has a very deep chemical tank. Depth of chemical tank and film-transport rack of 450XT is 140mm but with an 88mm width. Such a design of deep depth and narrow width meets the high requirement of large process volume, good chemical anti-oxidation

performance, even processing density, no scratches

MODEL HQ-450XT

Features:This desk-top small film processor with less expensive price is newly launched in market by Huqiu Imaging. It possesses only 0.36©O ground area with front and rear two output modes for selection. Excellent performance plus affordable price, the machine can be widely applied in middle and small hospital for mode of several machines in one hospital, several machines in one operation room and processing mode instead of traditional manual operation. Its sale price is much lower than similar product and its fix and develop chemical volume is only 4.5L. It is specially designed as a hi-efficiency, energy-saving medical film processing device for user who has some volume of film processing everyday. Max processing width is 14 inch and fastest whole process needs only 90 sec

MODEL HQ-350XT

3

4

Specification:

Normal Mode : 9.7

Normal Mode : 8

Weight - (kg) 220

(kw) 1.3

Sensitivity (better than film) - 1.2

220V ( ± 10% )

Acquisition Area (mm) 146 220 * 300

Sensor Type - Digital Multi - Linear Sensor

Gray Level - 4,096 (12 bit

Exposure Factors - 50 ~ 90 kV, 2 ~ 10mA

Focal Spot - 0.35 X 0.5 mm

Data Acquisition Speed - 20Mb/s

Power Supply - 220V

MODEL PAX-400C DIGITAL PANORAMIC & CEPHALOMETRIC SYSTEM

MODEL PAX- 1000 DIGITAL PANORAMIC Feature

▪ Support All Kinds of Panoramic view including TMJ

▪ Outstanding image quality with minimum X-ray dose

▪ Intuitive user controls ensure precise and reproducible image

acquisition

▪ Dual speed vertical movement Up/Down Multi-Step

▪ Voice guidance for patient positioning

▪ Competitive price compare to its quality

Specification:

Tube Voltage - 60 ~ 90 Kv

Tube Current - 4~10 mA

Focal Spot - 0.35mm x 0.5mm

Exposure time (sec) - 13.8sec (Panoramic standard) 0.2~3.5

sec (Cephalometric)

Power Supply - 220 V / 110 V

Power (kW) - 1.3 Kw

-ONLY PANORAMIC

Features:

- Wireless communication system between PC and

- panoramic system (After the system upgrade)

- One touch operating panel for user Convenience

- Automatic voice guidance system for patient's safety

- Embedded Self-testing system

- Available for all kinds of panoramic & cephalometric

imaging modes

Specification:

Exposure time (Sec)Panorama : 13.8 sec

Film CassettePanorama : 15X30 cm

Focal Spot0.35 X 0.5 mm

Exposure Factors50 ~ 90 kV, 2~10 mA

Nominal power1.3 kW

Power Supply220V / 110V

MODEL NEO-TOP-F FILM PANORAMIC & CEPHALOMETRIC X-RAY

5

Visual & Voice Guidance for Patient’s safety in the scanning process

LCD on the mirror & Voice Guidance for patient’s safety in the scanning process

LDCP (Low Dark Current Processing) Logic Circuit LDCP Logic Circuit ensures ZERO SNR (signal-to-noise ratio), high definition and wide range of gray scale.

3 positioning beams - Vertical, Horizontal, and Canine beams allow for an accurate patient positioning

Dual speed vertical movement - Motorized and weight-balanced carriage up and down movement, guarantee for a fast and an easy height adjustment with no vibration and with low noise.-PANORAMIC AND CEPHALOMETRIC

Reduces x-ray exposure time to 1.9 sec - DSSI (Dual Shot Signal Integration for Cephalo) technology- Eliminates moving artifact for cephalometric imagingEliminates blurred image of the incisor - ALC (Adaptive Layer Control) technologyAchieves high-definition cephalometric image - DUET (DUal EnhancemenT) Algorithm- Produces efficient image not only for hard bone, but also for soft tissueGuarantees for a stable signal transfer - CAN (Controller Area Network) system- Supports high system reliance and convenience for maintenanceAchieves stable and efficient image in any condition- AOP (Automatic Optimizing Process) technologyAchieves clearer image for critical usage - Provides special scanning modes for the incisor, mandibular canal, and maxillary molar

-ONLY PANORAMIC

MODEL PAX-500 DIGITAL PANORAMIC ONLY

MODEL PAX-500 VERSA PANORAMIC AND CEPHALOMETRIC SYSTEM




Dual speed vertical movement - Motorized and weight-balanced carriage up and down movement, guarantee for a fast and an easy height adjustment with no vibration and with low noise.

Exposure time – 0.3 sec – The ideal solution for patients still in their growth stages

No Image Distortion – Uses big-size Flat Panel Detector

Premium Equipment – For the orthodontic Specialist-PANORAMIC AND CEPHALOMETRIC

MODEL PAX-500 OS PRO DIGITAL PANORAMIC AND CEPHALOMETRIC

6

Advanced Solution - Much Less Expensive but with much Better Images”. With state-of-the-art X-ray imaging technology for dental implant specialists. It brings total success in the digital X-ray market.

Patient’s Safety - Scanning time is just 8 seconds or about 70% less exposure dose compared with other TOMO equipments.

Simple & Convenient Alignment

* ECT does not need impression models. On other TOMO systems using impression models, it takes around 20 minutes to adjust alignment for TOMO scanning * ECT is using the standard focal trough. For position adjustments, it uses the SCOUT VIEWER method.

Powerful & exclusive Ez3D - ECT provides cross sectional and longitudinal images. The slicing thickness selection ranges from 0.186mm to 10mm. The Ez3D provides high quality 3D Rendering images equal to a CT system.

-PANORAMIC AND TOMOGRAPHY

MODEL PAX-500 ECT DIGITAL PANORAMIC AND TOMOGRAM

Advanced Solution - Much Less Expensive but with much Better Images”. With state-of-the-art X-ray imaging technology for dental implant specialists. It brings total success in the digital X-ray market.

Patient’s Safety - Scanning time is just 8 seconds or about 70% less exposure dose compared with other TOMO equipments.

Simple & Convenient Alignment

* ECT does not need impression models. On other TOMO systems using impression models, it takes around 20 minutes to adjust alignment for TOMO scanning * ECT is using the standard focal trough. For position adjustments, it uses the SCOUT VIEWER method.

Powerful & exclusive Ez3D - ECT provides cross sectional and longitudinal images. The slicing thickness selection ranges from 0.186mm to 10mm. The Ez3D provides high quality 3D Rendering images equal to a CT system.

-PANORAMIC, CEPHALOMETRIC AND TOMOGRAPHY

MODEL PAX-500 ECT VERSA PANORAMIC,CEPHALOMETRIC & TOMOGRAM




Dual speed vertical movement - Motorized and weight-balanced carriage up and down movement, guarantee for a fast and an easy height adjustment with no vibration and with low noise.

Exposure time – 0.3 sec – The ideal solution for patients still in their growth stages

No Image Distortion – Uses big-size Flat Panel Detector

Premium Equipment – For the orthodontic Specialist-PANORAMIC, CEPHALOMETRIC AND TOMOGRAPHY

MODEL PAX-500 ECT OS PRO PANORAMIC,CEPHALOMETRIC & TOMOGRAM

7

SPECIFICATION:

X-ray Beam - Cone Beam

Data bit - 16bit

Slice Thickness(mm) - 0.186 ~10 mm (default 1.5mm)

Scan Time (sec) - 20 sec / 8.3 sec

Patient Position - Stand

Patient Alignment - Align based on Standard Data of Focal Trough, Optional : Align with Scout View

FOV (WXH) - 50 X 50 mm, 80 X 50 mm

Reconstruction Time - Under 1 min

Basic Display View - Longitudinal / Cross Sectional / Axial / Coronal / Sagittal

Reference Pano View - Support

3D Image - Default-PANORAMIC AND E.C.T.

MODEL UNI3D DIGITAL PANORAMIC AND ECT

SPECIFICATION:

X-ray Beam - Cone Beam

Data bit - 16bit

Slice Thickness(mm) - 0.186 ~10 mm (default 1.5mm)

Scan Time (sec) - 20 sec / 8.3 sec

Patient Position - Stand

Patient Alignment - Align based on Standard Data of Focal Trough, Optional : Align with Scout View

FOV (WXH) - 50 X 50 mm, 80 X 50 mm

Reconstruction Time - Under 1 min

Basic Display View - Longitudinal / Cross Sectional / Axial / Coronal / Sagittal

Reference Pano View - Support

3D Image - Default-PANORAMIC, E.C.T. AND CEPHALOMETRIC

MODEL UNI3D OS DIGITAL PANORAMIC, E.C.T. AND CEPHALOMETRIC

ADVANCED FEATURE OF PICASSO

- Standard Dental CT

- FOV 12x7

- Basic Equipment for computerized Dental Clinics

- Existing network of more than 1200 dentists world wide

- As a reliable partner E-WOO is beyond experience

- The worlds first “Combined All in One” Digital Dental CT, Panoramic and Cephalometric X-ray

- Paving to Global Customer Service System supporting the Global Customer Service Network

Innovative Technology

- Fastest 3D Reconstruction Time

- Fixed CT Sensor

- Digital Sensor Holder

- One Touch LCD Monitor

- 3D Volume Rendering

MODEL PICASSO PRO FOV 12X7

8



- FOV 8X5








- Fixed CT Sensor



-3D Volume Rendering

-PANORAMIC AND E.C.T.

MODEL PICASSO TRIO SP FOV 8X5



- FOV 12X7








- Fixed CT Sensor




-PANORAMIC AND E.C.T.

MODEL PICASSO TRIO SP FOV 12X7



- FOV 12X7








- Fixed CT Sensor




-PANORAMIC, E.C.T. AND CEPHALOMETRIC

MODEL PICASSO TRIO SC FOV 12X7

9



- FOV 12X7








- Fixed CT Sensor




-PANORAMIC, E.C.T. AND CEPHALOMETRIC

MODEL PICASSO TRIO OS FOV 12X7

The New Revolution in Digital Radiographic 3D

imaging :

- With the most Flexible FOV (16X7 16X10 20X15 as

well as the largest in size .

- Adjustable Voxel Sizes: 0.2 / 0.3 / 0.4mm (0.165mm

also available)

- Reasonable Radiation Dosage based on FOV

flexibility

- Short reconstruction time with GPU Solution

- Convenient & Modern Design

- With the most advanced Softwares:

"EzImplant", a specialized 3D image Viewer

"EasyDent", a patient management & Panoramic /

Cephalometric image Viewer,

“EzGate”, a DICOM file interface program with PACS

MODEL MASTER 3D-15 (FOV 16X7 16X10 20X15)


imaging :




also available)


flexibility








MODEL MASTER 3D-15 (FOV 16X7 16X10 20X19)

10


imaging :




also available)


flexibility



- With the most advanced Software:





WITH WHEEL CHAIR ACCESS

MODEL MASTER 3DS-15 (FOV 16X7 16X10 20X15)


imaging :




also available)


flexibility








WITH WHEEL CHAIR ACCESS

MODEL MASTER 3DS-19 (FOV 16X7 16X10 20X19)

Specification:

Exposure Time (sec) – 13 sec (Standard Panoramic

Adult)

Weight (kg) – 180 kg

Power – 1.3 kw

Acquisition Area – Panorama – 146mm x 300 mm

Sensor Type – Panorama – Multi Linear Sensor

Gray Level – 4,096 (12 bit)

Tube Voltage – 40 – 90 kv (adjustable by 1 kv)

Tube Current – 2 -10 ma (adjustable by 1 mA)

Focal Spot – 0.35 mm x 0.5 mm according to IEC336

ONLY PANORAMIC

MODEL PAX-400 DIGITAL PANORAMIC

11

Specification:Dimension(W X H X D) 205 X 140 X 85mm(Wall Type)

Input Power Supply - 220V ± 10%

Focal Spot - 0.8 mm

HV Output - Maximum 500W

Tube Voltage - 65 Kv

Anode Current - 5mA

Operation Temp - 0.08 ~ 1.5 sec

Total Filtration - 2mm Al

Operation Temp - 10 ~ 40°C

Operation Humidity - 30 ~ 75 % RH

Weight - 34.0 kg (Chair Type) 23.8 kg (Wall Type)

ESX INTRA-ORAL X-RAY (WALL MOUNTED) WITH ANYSENSOR INTRA-ORAL SENSOR

1. CASSETTE FOR PANORAMIC

2. CASSETTE FOR CEPHALOMETRIC

3. FILM PROCESSOR

SOFTWARE PACKAGESSOFTWARE PACKAGES

1. EasyDent – For PMS

2. Orthovision – For Orthodontic Analysis

3. EZ-Implant – For Implant Analysis

X-RAY ACCESORRIES

1 LISTEM X-RAY MODEL REX-525RF XRAY SYSTEM REXC-525RF - High Frequency X-ray Generator Controller...

Documents

Transcript of 1 LISTEM X-RAY MODEL REX-525RF XRAY SYSTEM REXC-525RF - High Frequency X-ray Generator Controller...