1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.
-
Upload
brandon-norris -
Category
Documents
-
view
302 -
download
0
Transcript of 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.
![Page 1: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/1.jpg)
1
Introduction to Fluid Mechanics.Chapter 1.
Phys 404
Dr Nazir Mustapha
![Page 2: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/2.jpg)
Al Imam University College of Sciences
Dr Nazir Mustapha – 323-223-C-1
1 2 3 4 5 6
Sunday Phys 404 (291)
Phys 404 (291)
Phys 404
(291)
Phys 404
(291)
Monday
Tuesday
Wednesday Phys 404 (291)
Phys 404 (291)
Phys 404 (291)
Phys 404 (291)
Thursday Phys 404 (291)
Phys 404 (291)
![Page 3: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/3.jpg)
3
Exams- Midterm 1: week: 2- Midterm 2: week: 4
- Final: week: 6 – or - 7
Grading: - Midterm1: 20
- Midterm 2: 20- Home works, participation &
quizzes: 20-Final Exam: 40
-Please note that a quiz will be given at the end of each chapter.
![Page 4: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/4.jpg)
4
PHYISCS 404 - Chapter 1-2Physics 404 –Fluid Mechanics
Dr. Nazir Mustapha Office: SR 104, Third Floor
Phone: 2582167
e-mail: [email protected]
OFFICE HOURSSun:10:00 – 11:20am, LECTURE HOURS
Sun & Wed: 1,2,3 &4 and Thurs: 1, 2
SCHEDULE
Lectures are on: Sunday, Wednesday and Thursday.
![Page 5: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/5.jpg)
5
Textbooks:1. Yunus A. Çengel and John M. Cimbala. Fluid Mechanics: Fundamentals and Applications.Second Edition, McGraw Hill, 2010. 2.Fox, McDonald & Pritchard. Introduction to Fluid Mechanics. 5th Edition, Wiley, 2004
![Page 6: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/6.jpg)
6
Mechanical properties of Matter and fluids.
Contents:• Definition of a fluid• Density,• Pressure, • Fluid flow,• Pascal Law• Boyle’s Law• Bernoulli's equation and its application,
![Page 7: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/7.jpg)
7
Introduction• Fluid mechanics is a study of the behavior of
fluids, either at rest (fluid statics) or in motion (fluid dynamics).
• The analysis is based on the fundamental laws of mechanics, which relate continuity of mass and energy with force and momentum.
• An understanding of the properties and behavior of fluids at rest and in motion is of great importance in Physics.
![Page 8: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/8.jpg)
8
1.1 Definition of FluidA fluid is a substance, which deforms
continuously, or flows, when subjected to shearing force.
In fact if a shear stress is acting on a fluid it will flow and if a fluid is at rest there is no shear stress acting on it.
Fluid Flow Shear stress – Yes
Fluid Rest Shear stress – No
![Page 9: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/9.jpg)
9
Definition of a Fluid
A fluid is a substance that flows under the action of shearing forces القص If a fluid is at rest, we know that the . قوىforces on it are in balance.
A gas is a fluid that is easily compressed. It fills any vessel in which it is contained.
A liquid is a fluid which is hard to compress. A given mass of liquid will occupy a fixed volume, irrespective of the size of the container.
A free surface is formed as a boundary between a liquid and a gas above it.
9
![Page 10: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/10.jpg)
10
Definition of a Fluid
• “a fluid, such as water or air, deforms continuously when acted on by shearing stresses of any magnitude.” - Munson, Young, Okiishi
WaterOilAirWhy isn’t steel a fluid?
WaterOilAirWhy isn’t steel a fluid?
![Page 11: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/11.jpg)
11
Fluid Deformation between Parallel Plates
Side viewSide view
Force F causes the top plate to have velocity U.Force F causes the top plate to have velocity U.What other parameters control how much force is What other parameters control how much force is required to get a desired velocity?required to get a desired velocity?
Distance between plates (b)Distance between plates (b)
Area of plates (A)Area of plates (A)
F
b
U
Viscosity!Viscosity!
![Page 12: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/12.jpg)
12
Shear stress in moving fluid
• If fluid is in motion, shear stress are developed if the particles of the fluid move relative to each other. Adjacent particles have different velocities, causing the shape of the fluid to become distorted
• On the other hand, the velocity of the fluid is the same at every point, no shear stress will be produced, the fluid particles are at rest relative to each other.
Moving plate Shear force
Fluid particles New particle position
Fixed surface
![Page 13: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/13.jpg)
Shearing Forces
13
![Page 14: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/14.jpg)
Fluid Mechanics
14
•Liquids and gases have the ability to flow.
•They are called fluids.
•There are a variety of “LAWS” that fluids obey.
•Need some definitions.
![Page 15: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/15.jpg)
15
Differences between liquid and gases.
Liquid Gases
Difficult to compress and often regarded as incompressible.
Easily to compress – changes of volume is large, cannot normally be neglected and are related to temperature.
Occupies a fixed volume and will take the shape of the container.
No fixed volume, it changes volume to expand to fill the containing vessels.
A free surface is formed if the volume of container is greater than the liquid.
Completely fill the vessel so that no free surface is formed.
![Page 16: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/16.jpg)
Pressure in a Fluid
16
•The pressure is just the weight of all the fluid above you.
•Atmospheric pressure is just the weight of all the air above an area on the surface of the earth.
•In a swimming pool the pressure on your body surface is just the weight of the water above you (plus the air pressure above the water).
![Page 17: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/17.jpg)
Pressure in a Fluid
17
•So, the only thing that counts in fluid pressure is the gravitational force acting on the mass ABOVE you.
•The deeper you go, the more weight above you and the more pressure.
•Go to a mountaintop and the air pressure is lower.
![Page 18: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/18.jpg)
Pressure in a Fluid
18
Pressure acts perpendicular to the surface and increases at greater depth.
![Page 19: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/19.jpg)
Pressure in a Fluid
19
![Page 20: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/20.jpg)
Buoyancy
20
Net upward force is called the buoyant force!!!
Easier to lift a rock in water!!
![Page 21: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/21.jpg)
Displacement of Water
21
The amount of water displaced is equal to the volume of the rock.
![Page 22: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/22.jpg)
22
Archimedes’ Principle
• An immersed body is buoyed up by a force equal to the weight of the fluid it displaces.
• If the buoyant force on an object is greater than the force of gravity acting on the object, the object will float.
• The apparent weight of an object in a liquid is gravitational force (weight) minus the buoyant force.
![Page 23: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/23.jpg)
23
Flotation
• A floating object displaces a weight of fluid equal to its own weight.
![Page 24: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/24.jpg)
24
Flotation
![Page 25: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/25.jpg)
25
Gases
• The primary difference between a liquid and a gas is the distance between the molecules.
• In a gas, the molecules are so widely separated, that there is little interaction between the individual molecules.
• IDEAL GAS.
• Independent of what the molecules are.
![Page 26: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/26.jpg)
2626
Boyle’s Law
![Page 27: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/27.jpg)
27
Boyle’s Law
• Pressure depends on density of the gas.
• Pressure is just the force per unit area exerted by the molecules as they collide with the walls of the container.
• Double the density, double the number of collisions with the wall and this doubles the pressure.
![Page 28: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/28.jpg)
28
Boyle’s Law
Density is mass divided by volume.
Halve the volume and you double the density and thus the pressure.
![Page 29: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/29.jpg)
29
Boyle’s Law
• At a given temperature for a given quantity of gas, the product of the pressure and the volume is a constant
P1V1 P2V2
![Page 30: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/30.jpg)
Elements that exist as gases at 250C and 1 atmosphere
![Page 31: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/31.jpg)
Figure 1.7: The Pressure-Volume Relationship:Boyle’s Law
The Gas LawsThe Gas Laws
![Page 32: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/32.jpg)
The Pressure-Volume Relationship: Boyle’s Law• Mathematically:
• A sample of gas contained in a flask with a volume of 1.53 L and kept at a pressure of 5.6×103 Pa. If the pressure is changed to 1.5×104 Pa at constant temperature, what will be the new volume? (in-class example).
The Gas LawsThe Gas Laws
PV
1constant constantPV
2211 VPVP
![Page 33: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/33.jpg)
P 1/V
P x V = constant
P1 x V1 = P2 x V2
Boyle’s Law
Constant temperatureConstant amount of gas
![Page 34: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/34.jpg)
A sample of chlorine gas occupies a volume of 946 mL at a pressure of 726 mmHg. What is the pressure of the gas (in mmHg) if the volume is reduced at constant temperature to 154 mL?
P1 x V1 = P2 x V2
P1 = 726 mmHg
V1 = 946 mL
P2 = ?
V2 = 154 mL
P2 = P1 x V1
V2
726 mmHg x 946 mL154 mL
= = 4460 mmHg
![Page 35: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/35.jpg)
35
Atmospheric Pressure
• Just the weight of the air above you.
• Unlike water, the density of the air decreases with altitude since air is compressible and liquids are only very slightly compressible.
• Air pressure at sea level is about 105 newtons/meter2.
![Page 36: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/36.jpg)
36
Barometers
![Page 37: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/37.jpg)
37
Buoyancy in a Gas
• An object surrounded by air is buoyed up by a force equal to the weight of the air displace.
• Exactly the same concept as buoyancy in water. Just substitute air for water in the statement.
• If the buoyant force is greater than the weight of the object, it will rise in the air.
![Page 38: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/38.jpg)
38
Buoyancy in a Gas
Since air gets less dense with altitude, the buoyant force decreases with altitude. So helium balloons don’t rise forever!!!
![Page 39: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/39.jpg)
39
Bernoulli’s Principle
![Page 40: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/40.jpg)
40
Bernoulli’s Principle.
• Flow is faster when the pipe is narrower.
• Put your thumb over the end of a garden hose.
• Energy conservation requires that the pressure be
lower in a gas that is moving faster.
• Has to do with the work necessary to compress a
gas (PV is energy, more later).
![Page 41: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/41.jpg)
41
Bernoulli’s Principle
• When the speed of a fluid increases, internal pressure in the fluid decreases.
![Page 42: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/42.jpg)
42
Bernoulli’s Principle
![Page 43: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/43.jpg)
43
Bernoulli’s Principle
Why the streamlines are compressed is quite complicated and relates to the air boundary layer, friction and turbulence.
![Page 44: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/44.jpg)
44
Bernoulli’s Principle
![Page 45: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/45.jpg)
45
Bernoulli’s Equation
![Page 46: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/46.jpg)
Bernoulli’s Equation
A fluid flowing through a constricted pipe with streamline flow. The fluid in the section of length Δx1 moves to the section of length Δx2 . The volumes of fluid in the two sections are equal.
The speed of water spraying from the end of a hose increases as the size of the opening is decreased with thumb.
46
![Page 47: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/47.jpg)
47
Bernoulli’s Equation
• The sum of the pressure, kinetic energy per unit volume, and gravitational potential energy per unit volume has the same value at all points along a streamline.
• This result is summarized in Bernoulli’s equation:
• P + 1/2 ρ v2 + ρ gy = constant
47
![Page 48: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/48.jpg)
48
The Venturi tube
(a) Pressure P1 is greater Than the pressure P2 since v1 < v2. This device can be used to measure the speed of fluid flow.
Solution: Because the pipe is horizontal,
y1 = y2, and applying Bernoulli’s equation:
48
The horizontal constricted pipe illustrated in figure known as a Venturi tube, can be used to measure the flow speed of an incompressible fluid. Let us determine the flow speed at point 2 if the pressure difference P1 ̶ P2 is known.
Figure 15: Venturi Tube
![Page 49: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/49.jpg)
4949
Bernoulli’s Equation
For steady flow, the speed, pressure, and elevation of an incompressible and nonviscous fluid are related by an equation discovered by Daniel Bernoulli (1700–1782).
Figure 16
![Page 50: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/50.jpg)
5050
Bernoulli’s Equation
In the steady flow of a nonviscous, incompressible fluid of density ρ, the pressure P, the fluid speed v, and the elevation y at any two points (1 and 2) are related by:
Figure 17:
![Page 51: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/51.jpg)
51
Bernoulli’s Equation
A fluid flowing through a constricted pipe with streamline flow. The fluid in the section of length Δx1 moves to the section of length Δx2 . The volumes of fluid in the two sections are equal.
The speed of water spraying from the end of a hose increases as the size of the opening is decreased with thumb.
51
![Page 52: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/52.jpg)
5252
Bernoulli’s Equation
A fluid can also change its height. By looking at the work done as it moves, we find:
This is Bernoulli’s equation. One thing it tells us is that as the speed goes up, the pressure goes down.
![Page 53: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/53.jpg)
53
![Page 54: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/54.jpg)
Fluids at rest
54
![Page 55: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/55.jpg)
55
Stress on an object submerged in a static fluid
• The force exerted by a static fluid on an object is always perpendicular to the surfaces of the object.
• The force exerted by the fluid on the walls of the container is perpendicular to the walls at all points.
![Page 56: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/56.jpg)
56
Density
The density of a fluid is defined as its mass per unit volume. It is denoted by the Greek symbol, .
=V m3kgm-3
If the density is constant (most liquids), the flow is incompressible.
If the density varies significantly (e.g. some gas flows), the flow is compressible.
(Although gases are easy to compress, the flow may be treated as incompressible if there are no large pressure fluctuations)
water= 998 kgm-3
air =1.2kgm-3
kgm
![Page 57: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/57.jpg)
57
Pressure
Pressure is the force per unit area, where the force is perpendicular to the area.
p=A m2
Nm-2
(Pa)
NF
This is the Absolute pressure, the pressure compared to a vacuum.
pa= 105 Nm-2
1psi =6895Pa
The pressure measured in your tyres is the gauge pressure, p-pa. 1 Pa = 1 N/m2, in the SI system.
![Page 58: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/58.jpg)
Atmosphere Pressure and the Barometer
Figure 1.2: PressureFigure 1.2: Pressure
A
FP
•Standard atmospheric pressure = 760 mm of Hg
•1 atm = 760 mmHg = 760 torr = 101.325 kPa.
![Page 59: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/59.jpg)
Units of Pressure
1 pascal (Pa) = 1 N/m2
1 atm = 760 mmHg = 760 torr
1 atm = 101,325 Pa
Barometer
Pressure = ForceArea
![Page 60: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/60.jpg)
Sea level 1 atm
4 miles 0.5 atm
10 miles 0.2 atm
![Page 61: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/61.jpg)
Absolute Pressure
61
![Page 62: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/62.jpg)
6262
Example: (a) What are the total force and the absolute pressure on the bottom of a swimming pool 22.0 m by 8.5 m whose uniform depth is 2.0 m? (b) What will be the pressure against the side of the pool near the bottom?
(a)The absolute pressure is given by P=P0+ρgh, and the total force is the absolute pressure times the area of the bottom of the pool.
5 2 3 3 2
0
5 2
5 2 7
1.013 10 N m 1.00 10 kg m 9.80 m s 2.0 m
1.21 10 N m
1.21 10 N m 22.0 m 8.5 m 2.3 10 N
P P gh
F PA
![Page 63: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/63.jpg)
6363
(b) The pressure against the side of the pool, near the bottom, will be the same as the pressure at the bottom,
5 21.21 10 N mP
![Page 64: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/64.jpg)
Uniform Pressure
64
Uniform Pressure: If the pressure is the same at all points on a surface.
![Page 65: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/65.jpg)
Properties of Fluids
65
Density: SI Units: Kg/m3
![Page 66: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/66.jpg)
Properties of fluids
66
![Page 67: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/67.jpg)
Properties of fluids
67
![Page 68: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/68.jpg)
68
Blood as a fraction of body weight
• The body of a man whose weight is 690 N contains about 5.2 × 10 ̶̶̶̶ 3 m3 of blood.
• (a) Find the blood’s weight and?• (b) Express it as percentage of the body weight?
( in class example).
![Page 69: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/69.jpg)
69
A simple device for measuring the pressure exerted by a fluid
• The device consists of an evacuated cylinder that encloses a light piston connected to a spring.
• As the device is submerged in a fluid, the fluid presses on the top of the piston and compresses the spring until the inward force exerted by the fluid is balanced by the outward force exerted by the spring.
![Page 70: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/70.jpg)
70
Force and Pressure
• dF =P dA • Where P is the pressure
at the location of the area dA.
![Page 71: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/71.jpg)
71
Example1: The water bed
• The mattress of a water bed is 2m long by 2m wide and 30 cm deep.
• (a) Find the volume of the mattress?
• V = (2m)(2m)(0.3m) = 1.2 m3
• (b) Find the weight of the water in the mattress?
• M = V= (1000 kg/m3)(1.2m3) = 1.2 x 103 kg
• and its weight is: Mg = (1.2 x 103 kg)( 9.80m/s2) = 1.18x 104N
• (c) Find the pressure exerted by the water on the floor when the bed rests in its normal position. Assume that the entire lower surface of the bed makes contact with the floor?
![Page 72: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/72.jpg)
72
The water Bed
• When the bed is in its normal position, the area in contact with the floor is: 2 x 2 = 4 m2 ; thus we find that:
• (d) What if the water bed is replaced by a 50 kg ordinary bed that is supported by four legs? Each leg has a circular cross section of radius 2 cm. what pressure does this bed exert on the floor? HW
![Page 73: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/73.jpg)
73
![Page 74: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/74.jpg)
74
Variation of Pressure with depth
Pressure in a fluid acts equally in all directions
Pressure in a static liquid increases linearly with depth
p=increase in depth (m)
pressure increase
g h
The pressure at a given depth in a continuous, static body of liquid is constant.
p1 p2
p3 p1 = p2 = p3
![Page 75: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/75.jpg)
7575
Problem:
In a movie, Tarzan evades his captors by hiding underwater for many minutes while breathing through a long, thin reed. Assuming the maximum pressure difference his lungs can manage and still breathe is calculate the deepest he could have been.
Solution: The pressure difference on the lungs is the pressure change from the depth of water
2
3 3 2
133 N m85 mm-Hg
1 mm-Hg 1.154 m 1.2 m
1.00 10 kg m 9.80 m s
PP g h h
g
![Page 76: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/76.jpg)
76
A parcel of fluid (darker region) in a larger volume of fluid is
singled out. The net force exerted on the parcel of fluid must be zero because it is in equilibrium.
![Page 77: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/77.jpg)
77
Exercises: A Pain in your Ear• The difference between the total
pressure at the bottom of the pool and atmospheric pressure:
• Pbot – P0 = ρ gh
= (1000 kg / m3)(9.8 m/s2 )(5m)
= 4.9 × 104 Pa
The force on the eardrum:
F =( Pbot – P0 ) A = 5N
• Estimate the force exerted on your eardrum due to the water above when you are swimming at the bottom of a pool is 5 m deep.
• g = 9.8 m/s2 (SI)
• ρwater = 1000 kg / m3
• Solution: We estimate the surface area of the eardrum to be approximately:
• 1cm2 = 1x10-4 m2. • The air inside the middle ear is
normally at atmospheric pressure P0.
![Page 78: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/78.jpg)
78
Example: A pain in the Ear.
Because a force on the eardrum of this magnitude is extremely uncomfortable, swimmers “pop their ears” while under water, an action that pushes air from the lungs into the middle ear. Using this technique equalizes the pressure on the two sides of the eardrum and relieves the discomfort.
F = ( Pbot – P0) A =( 4.9 × 10 4 pa) (1×10 ̶ 4 cm2) = 5 N
b) We estimate the surface area of the eardrum to be approximately:
1 cm2 = 1 × 10 ̶ 4 m2, This means that the force on it is:
![Page 79: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/79.jpg)
79
Ideal Gas Law• Gases are highly compressible in comparison to
liquids, with changes in gas density directly related to changes in pressure and temperature through the equation:– P = RT
• where– P is the absolute pressure, is the gas density– R is the gas constant– Ru is the universal gas constant, – T is the absolute temperature
• SI unit of the temperature is the Kelvin scale.
![Page 80: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/80.jpg)
Density Form of Ideal Gas Law
P= RT
![Page 81: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/81.jpg)
Ideal gas Equation
81
T(K) = T(0C) + 273.15The gas constant R is different for each gas.
Many gases can be treated as ideal gases :•Air – nitrogen, oxygen, hydrogen, helium, argon, neon, krypton and carbon dioxide.
•Dense gases such as water vapor in steam power plants and refrigerant vapor in refrigerators should not be treated as ideal gases.
![Page 82: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/82.jpg)
Density, Specific Gravity, and Mass of Air in a room
82
Determine the density, specific gravity, and mass of the air in a room whose dimensions are 4 m × 5 m × 6 m at 100 kPa and 25 0C.Solution: The density, specific gravity, and mass of the air in a room are to be determined.Assumptions At specific conditions, air can be treated as an ideal gas.Properties The gas constant of air is R = 0.287 kPa. m3/ kg. K.Analysis The density of the air is determined from the ideal-gas relation: P= RT
![Page 83: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/83.jpg)
Density, Specific Gravity, and Mass of Air in a room
83
3
3
/17.1
)15.27325)(./.287.0(
100
mkg
KKkgmkPa
kPa
RT
P
![Page 84: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/84.jpg)
Density, Specific Gravity, and Mass of Air in a room
84
00117.0/1000
/17.13
3
mkg
mkgSG
water
air
Then the specific gravity of the air becomes:
![Page 85: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/85.jpg)
Density, Specific Gravity, and Mass of Air in a room
85
Finally, the volume and the mass of the air in the room are:
Volume: V = (4 m) (5 m)(6 m) = 120 m3
mass: m = ρ V = (1.17 kg/m3)(120 m3) = 140 kg.
Discussion: Note that that we converted the temperature to the unit K from 0C before using it in the ideal-gas relation.
![Page 86: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/86.jpg)
• Highly compressible.• Occupy the full volume of their containers.• When gas is subjected to pressure, its volume decreases.• Gases always form homogeneous mixtures with other
gases.• Gases only occupy about 0.1 % of the volume of their
containers.
General Characteristics of GasesGeneral Characteristics of Gases
![Page 87: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/87.jpg)
Four Physical Quantities for GasesFour Physical Quantities for Gases
Phys. Qty.
Symbol SI unitOther common units
pressure PPascal (Pa)
atm, mm Hg, torr, psi
volume V m3 dm3, L, mL, cm3
temp. T K °C, °F
moles n mol
![Page 88: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/88.jpg)
88
Because the increase in pressure is the same on the two sides, a small force F1 at the left produces a much greater force F2 at the right.
Diagram of a hydraulic press
A vehicle undergoing repair is supported by a hydraulic lift in a garage.
![Page 89: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/89.jpg)
89
Pascal Law
Pascal ‘s Law: a change in the pressure applied to a fluid is transmitted undiminished to every point of the fluid and to the walls of the container.
French Scientist Blaise Pascal ( 1623 – 1662)
![Page 90: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/90.jpg)
90
hydraulic press
• In the hydraulic press illustrated before:
![Page 91: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/91.jpg)
91
Hydrostatic Application: Transmission of Fluid Pressure
• Mechanical advantage can be gained with equality of pressures
• A small force applied at the small piston is used to develop a large force at the large piston.
• This is the principle between hydraulic jacks, lifts, presses, and hydraulic controls
11
22 F
A
AF
22
11 F
A
AF
![Page 92: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/92.jpg)
92
Example: the car lift
![Page 93: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/93.jpg)
93
Measuring pressure (1)Manometers
h
p1 p2=pa
liquiddensity
x y
z
p1 = px
px = py
pz= p2 = pa
(negligible pressure change in a gas)
(since they are at the same height)
py - pz = gh
p1 - pa = gh
So a manometer measures gauge pressure.
![Page 94: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/94.jpg)
• Closed Systems => manometers
Figure 1.3: PressureFigure 1.3: Pressure
![Page 95: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/95.jpg)
95
Manometer, how it works?( السائل ( أو الغاز ضغط مقياس
• Manometer is an instrument used to measure the pressure of a gas or vapor. There are several types of manometers. The simplest kind consists of a U-shaped tube with both ends open. The tube contains a liquid, often mercury, which fills the bottom of the U and rises in each of the arms. The person using this type connects one of the arms to the gas whose pressure is to be measured. The other arm remains open to the atmosphere. In this way, the liquid is exposed to the pressure of the gas in one arm and atmospheric pressure in the other.
![Page 96: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/96.jpg)
96
Measuring Pressure (2)Barometers
A barometer is used to measure the pressure of the atmosphere. The simplest type of barometer consists of a column of fluid.
p1 = 0vacuum
h
p2 = pa
p2 - p1 = gh
pa = gh
examples
water: h = pa/g =105/(103*9.8) ~10m
mercury: h = pa/g =105/(13.4*103*9.8) ~800mm
![Page 97: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/97.jpg)
97
Measurement of Pressure: Barometers
The first mercury barometer was constructed in 1643-1644 by Torricelli.
He showed that the height of mercury in a column was 1/14 that of a water barometer, due to the fact that mercury is 14 times more dense that water.
He also noticed that level of mercury varied from day to day due to weather changes, and that at the top of the column there is a vacuum.
Evangelista Torricelli (1608-1647)
![Page 98: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/98.jpg)
98
Measuring Pressure• Two devices for measuring
pressure:
• a) an open-tube manometer and
• b) a mercury barometer.
![Page 99: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/99.jpg)
99
![Page 100: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/100.jpg)
100
Archimedes’ Principle
• An immersed body is buoyed up by a force equal to the weight of the fluid it displaces.
• If the buoyant force on an object is greater than the force of gravity acting on the object, the object will float.
• The apparent weight of an object in a liquid is gravitational force (weight) minus the buoyant force.
![Page 101: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/101.jpg)
101
Buoyancy
• Net upward force is called the buoyant force!!!
• Easier to lift a rock in water!!
![Page 102: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/102.jpg)
102
Displacement of Water
• The amount of water displaced is equal to the volume of the rock.
![Page 103: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/103.jpg)
103
Flotation
• A floating object displaces a weight of fluid equal to its own weight.
![Page 104: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/104.jpg)
104
Flotation
![Page 105: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/105.jpg)
105
Buoyant Forces and Archimedes’s Principle
• The upward force exerted by water on any immersed object is called the Buoyant force.
• We can determine the magnitude of a buoyant force by applying some logic and Newton’s second Law.
• Archimedes’s Principle States that the magnitude of the Buoyant Force always equals the weight of the Fluid displaced by the object.
![Page 106: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/106.jpg)
• The buoyant force acting on the steel cube is the same as the buoyant force acting on a cube of liquid of the same dimensions.
Buoyant Forces and Archimedes’s Principle
![Page 107: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/107.jpg)
The external forces acting on the cube of liquid are:
1- The force of gravity Fg and
2-The buoyant force FB.
Under equilibrium conditions:
FB = Fg
h: height of the cube
Buoyant Forces and Archimedes’s Principle
![Page 108: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/108.jpg)
Buoyant Force:• FB = mg
• Or FB = Vρ g
• FB = mg = Vρ g
• ΔP = FB/A
• FB = (ΔP)A = (ρ g h)A
• FB = ρ gV
• V is the volume of the cube.
• mg is the weight of the fluid in the cube.
• The mass of the fluid in the cube is m= ρ V.
• The pressure difference ΔP between the bottom and top faces of the cube is equal to the buoyant force per unit area of those faces.
![Page 109: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/109.jpg)
Example of a buoyant force.
•Hot-air balloons. Because hot air is less dense than cold air.Then:
•A net upward force acts on the balloons.
![Page 110: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/110.jpg)
• (a) A totally submerged object that is less dense than the fluid in which it is submerged experiences a net upward force.
• (b) A totally submerged object that is denser than the fluid sinks.
Buoyant Forces and Archimedes’s Principle
![Page 111: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/111.jpg)
Buoyant Forces and Archimedes’s Principle
Quiz: • A glass of Water contains a
single floating ice cube. When the ice melts, does the water level go up, go down, or remain the same?
• When a person in a rowboat in a small pond throws an anchor overboard, does the water level of the pond go up, go down, or remain the same?
![Page 112: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/112.jpg)
Exercises: A Pain in your Ear• The difference between the total
pressure at the bottom of the pool and atmospheric pressure:
• Pbot – P0 = ρ gh
= (1000 kg / m3)(9.8 m/s2 )(5m)
= 4.9 x 104 Pa
The force on the eardrum:
F =( Pbot – P0 ) A = 5N
• Estimate the force exerted on your eardrum due to the water above when you are swimming at the bottom of a pool is 5 m deep.
• g = 9.8 m/s2 (SI)
• ρwater = 1000 kg / m3
• Solution: We estimate the surface area of the eardrum to be approximately:
• 1cm2 = 1×10 ̶ 4 m2. • The air inside the middle ear is
normally at atmospheric pressure P0.
![Page 113: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/113.jpg)
113
Example:AirWaterOilGasolineAlcoholKeroseneBenzeneGlycerine
Fluid Newton’s lawof viscosity
Newtonian fluids obey refer
Newton’s’ law of viscosity is given by;
dy
du (1.1)
• The viscosity is a function only of the condition of the fluid, particularly its temperature.
• The magnitude of the velocity gradient (du/dy) has no effect on the magnitude of .
= shear stress = viscosity of fluiddu/dy = shear rate, rate of strain or velocity gradient
Newtonian and Non-Newtonian Fluid
![Page 114: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/114.jpg)
Velocity gradient
114
![Page 115: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/115.jpg)
115
So:
![Page 116: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/116.jpg)
116
![Page 117: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/117.jpg)
Viscosity
117
![Page 118: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/118.jpg)
118
![Page 119: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/119.jpg)
119
Fluid Newton’s lawof viscosity
Non- Newtonianfluids
Do not obey
•The viscosity of the non-Newtonian fluid is dependent on the velocity gradient as well as the condition of the fluid.
Newtonian Fluids a linear relationship between shear stress and the velocity gradient
(rate of shear), the slope is constant the viscosity is constant
non-Newtonian fluids slope of the curves for non-Newtonian fluids varies
Newtonian and Non-Newtonian Fluid
![Page 120: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/120.jpg)
98
Figure 1.1 Shear stress vs. velocity gradient
Bingham plastic : resist a small shear stress but flow easily under large shear stresses, e.g. sewage sludge, toothpaste, and jellies.Pseudo plastic : most non-Newtonian fluids fall under this group. Viscosity
decreases with increasing velocity gradient, e.g. colloidal substances like clay, milk, and cement.
Dilatants : viscosity decreases with increasing velocity gradient, e.g. quicksand.
![Page 121: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/121.jpg)
121
ViscosityViscosity
Viscosity is the resistance that a fluid offers to flow when subject to a shear stress.
Isaac Newton: “the resistance which arises from the lack of slipperiness of the parts of a fluid, other things being equal, is proportional to the velocity with which the parts of the liquid are separated from each other”
![Page 122: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/122.jpg)
122
Primary Units:
In fluid mechanics we are generally only interested in the top four units from this table.
SI. Units
Quantity SI Unit
Length Metre, m
Mass Kilogram, kg
Time Seconds, s
Temperature Kelvin, K
Current Ampere, A
Luminosity Candela
![Page 123: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/123.jpg)
123
Derived Units
Quantity SI Unitvelocity m/s -
acceleration m/s2 -
force Newton (N) N = kg.m/s2
energy (or work) Joule (J) J = N.m = kg.m2/s2
power Watt (W) W = N.m/s = kg.m2/s3
pressure (or stress) Pascal (P) P = N/m2 = kg/m/s2
density kg/m3 -
specific weight N/m3 = kg/m2/s2 N/m3 = kg/m2/s2
relative density a ratio (no units) dimensionless
viscosity N.s/m2 N.s/m2 = kg/m/s
surface tension N/m N/m = kg/s2
![Page 124: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/124.jpg)
124
Fluid Properties (Continue)
Specific weight:Specific weight of a fluid, • Definition: weight of the fluid per unit volume • Arising from the existence of a gravitational force • The relationship and g can be found using the
following:
Since = m/Vtherefore = g (1.3)
Units: N/m3
Typical values:Water = 9814 N/m3; Air = 12.07 N/m3
![Page 125: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/125.jpg)
125
Specific gravityThe specific gravity (or relative density) can be defined in two ways:
Definition 1: A ratio of the density of a substance to the density of water at standard temperature (4C) and atmospheric pressure, or
Definition 2: A ratio of the specific weight of a substance to the specific weight of water at standard temperature (4C) and atmospheric pressure.
(1.4)
Unit: dimensionless.
Cw
s
Cw
sSG
44 @@
Fluid Properties (Continue)
![Page 126: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/126.jpg)
126
Viscosity:
• Viscosity, , is the property of a fluid, due to cohesion and interaction between molecules, which offers resistance to shear deformation.
• Different fluids deform at different rates under the same shear stress. The ease with which a fluid pours is an indication of its viscosity. Fluid with a high viscosity such as syrup deforms more slowly than fluid with a low viscosity such as water. The viscosity is also known as dynamic viscosity.
Units: N.s/m2 or kg/m/s
Typical values:Water = 1.14 ×10 ̶ 3 kg/m/s; Air = 1.78 ×10 ̶ 5 kg/m/s
Fluid Properties (Continue)
![Page 127: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/127.jpg)
127
Kinematic viscosity, Definition: is the ratio of the viscosity to the density;
• will be found to be important in cases in which significant viscous and gravitational forces exist.
Units: m2/s
Typical values: Water = 1.14x10-6 m2/s; Air = 1.46x10-5 m2/s;
In general, viscosity of liquids with temperature, whereas
viscosity of gases with in temperature.
/
Properties of fluids
![Page 128: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/128.jpg)
128
Bulk Modulus All fluids are compressible under the application of an
external force and when the force is removed they expand back to their original volume.
The compressibility of a fluid is expressed by its bulk modulus of elasticity, K, which describes the variation of volume with change of pressure, i.e.
Thus, if the pressure intensity of a volume of fluid, , is increased by Δp and the volume is changed by Δ, then
Typical values:Water = 2.05x109 N/m2; Oil = 1.62x109 N/m2
strainvolumetric
pressureinchangeK
/
pK
p
K
![Page 129: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/129.jpg)
129
Vapor Pressure A liquid in a closed container is subjected to a
partial vapor pressure in the space above the liquid due to the escaping molecules from the surface;
It reaches a stage of equilibrium when this pressure reaches saturated vapor pressure.
Since this depends upon molecular activity, which is a function of temperature, the vapor pressure of a fluid also depends on its temperature and increases with it.
If the pressure above a liquid reaches the vapor pressure of the liquid, boiling occurs; for example if the pressure is reduced sufficiently boiling may occur at room temperature.
![Page 130: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/130.jpg)
130
•A reservoir of oil has a mass of 825 kg. The reservoir has a volume of 0.917 m3. Compute the density, specific weight, and specific gravity of the oil.
•Solution:
3/900917.0
825mkg
m
volume
massoil
3oil m/N882981.9x900g
mg
volume
weight
9.01000
900SG
C4@w
oiloil
Example 1.2
![Page 131: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/131.jpg)
131
End of Chapter 1.
![Page 132: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/132.jpg)
Chapter 2: Forces in Static FluidsThis section will study the forces acting on or generated by fluids at rest.Objectives:• Introduce the concept of pressure.• Prove it has a unique value at any particular elevation.• Show how it varies with depth according to the hydrostatic equation and• Show how pressure can be expressed in terms of head of fluid.This understanding of pressure will then be used to demonstrate methods of pressure measurement that will be useful later with fluid in motion and also to analyse the forces on submerges surface/structures.
![Page 133: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/133.jpg)
Chapter 2: Forces in Static Fluids
133
•Define and apply the concepts of density and fluid pressure to solve physical problems. •Define and apply concepts of absolute, gauge, and atmospheric pressures.•State Pascal’s law and apply for input and output pressures.•State and apply Archimedes’ Principle to solve physical problems.
Objectives:
![Page 134: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/134.jpg)
134
Mass Density
2 kg, 4000 cm3
Wood
177 cm3
45.2 kg
; mass m
Densityvolume V
Lead: 11,300 kg/mLead: 11,300 kg/m33
Wood: 500 kg/mWood: 500 kg/m33
4000 cm3
Lead
Same volume
2 kgLead
Same mass
![Page 135: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/135.jpg)
135
Example 1: The density of steel is 7800 kg/m3. What is the volume of a 4-kg block of
steel?
4 kg3
4 kg;
7800 kg/m
m mV
V
V = 5.13 × 10 ̶ 4 m3V = 5.13 × 10 ̶ 4 m3
What is the mass if the volume is 0.046 m3?3 3(7800 kg/m )(0.046 m );m V
m = 359 kgm = 359 kg
![Page 136: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/136.jpg)
136
Relative Density
The relative density rof a material is the ratio of its density to the density of water (1000 kg/m3).
Steel (7800 kg/m3) r = 7.80
Brass (8700 kg/m3) r = 8.70
Wood (500 kg/m3) r = 0.500
Steel (7800 kg/m3) r = 7.80
Brass (8700 kg/m3) r = 8.70
Wood (500 kg/m3) r = 0.500
Examples:Examples:
31000 kg/mx
r
![Page 137: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/137.jpg)
137
Pressure
Pressure is the ratio of a force F to the area A over which it is applied:
Pressure ; Force F
PArea A
Pressure ; Force F
PArea A
A = 2 cm2
1.5 kg
2
-4 2
(1.5 kg)(9.8 m/s )
2 x 10 m
FP
A
P = 73,500 N/m2P = 73,500 N/m2
![Page 138: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/138.jpg)
138
Pressure
Pressure is the ratio of a force F to the area A over which it is applied:
Pressure ; Force F
PArea A
Pressure ; Force F
PArea A
A = 2 cm2
1.5 kg
2
-4 2
(1.5 kg)(9.8 m/s )
2 x 10 m
FP
A
P = 73,500 N/m2P = 73,500 N/m2
![Page 139: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/139.jpg)
139
Fluid PressureA liquid or gas cannot sustain a shearing stress - it is only restrained by a boundary. Thus, it will exert a force against and perpendicular to that boundary.
• The force F exerted by a fluid on the walls of its container always acts perpendicular to the walls. Water flow
shows F
![Page 140: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/140.jpg)
140
Fluid PressureFluid exerts forces in many directions. Try to submerse a rubber ball in water to see that an upward force acts on the float.
• Fluids exert pressure in all directions.
F
![Page 141: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/141.jpg)
141
Pressure vs. Depth in Fluid
Pressure = force/area
; ; mg
P m V V AhA
Vg AhgP
A A
h
mgArea
• Pressure at any point in a fluid is directly proportional to the density of the fluid and to the depth in the fluid.
P = gh
Fluid Pressure:
![Page 142: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/142.jpg)
142
Independence of Shape and Area.
Water seeks its own level, indicating that fluid pressure is independent of area and shape of its container.
• At any depth h below the surface of the water in any column, the pressure P is the same. The shape and area are not factors.
• At any depth h below the surface of the water in any column, the pressure P is the same. The shape and area are not factors.
![Page 143: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/143.jpg)
143
Properties of Fluid Pressure
• The forces exerted by a fluid on the walls of its container are always perpendicular.
• The fluid pressure is directly proportional to the depth of the fluid and to its density.
• At any particular depth, the fluid pressure is the same in all directions.
• Fluid pressure is independent of the shape or area of its container.
• The forces exerted by a fluid on the walls of its container are always perpendicular.
• The fluid pressure is directly proportional to the depth of the fluid and to its density.
• At any particular depth, the fluid pressure is the same in all directions.
• Fluid pressure is independent of the shape or area of its container.
![Page 144: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/144.jpg)
144
Example 2. A diver is located 20 m below the surface of a lake (ρ = 1000 kg/m3). What is the pressure due to the water?
h = 1000 kg/m3
P = gh
The difference in pressure from the top of the lake to the diver is:
h = 20 m; g = 9.8 m/s2
3 2(1000 kg/m )(9.8 m/s )(20 m)P
P = 196000 Pa = 196 kPaP = 196000 Pa = 196 kPa
![Page 145: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/145.jpg)
145
Atmospheric Pressure
atm atm h
Mercury
P = 0One way to measure atmospheric pressure is to fill a test tube with mercury, then invert it into a bowl of mercury.
Density of Hg = 13,600 kg/m3
Patm = gh h = 0.760 m
Patm = (13,600 kg/m3)(9.8 m/s2)(0.760 m)
Patm = 101,300 Pa = 1.013 × 105 PaPatm = 101,300 Pa = 1.013 × 105 Pa
![Page 146: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/146.jpg)
146
Absolute Pressure
Absolute Pressure:Absolute Pressure: The sum of the pressure due to a fluid and the pressure due to atmosphere.
Gauge Pressure:Gauge Pressure: The difference between the absolute pressure and the pressure due to the atmosphere:
Absolute Pressure = Gauge Pressure + 1 atmAbsolute Pressure = Gauge Pressure + 1 atm
hP = 196 kPa
1 atm = 101.3 kPa
P = 196 kPa
1 atm = 101.3 kPa
Pabs = 196 kPa + 101.3 kPa
Pabs = 297 kPaPabs = 297 kPa
![Page 147: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/147.jpg)
147
Pascal’s Law
Pascal’s Law: An external pressure applied to an enclosed fluid is transmitted uniformly throughout the volume of the liquid.
FoutFin AoutAinPressure in = Pressure outPressure in = Pressure out
in out
in out
F F
A A
![Page 148: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/148.jpg)
148
Example 3. The smaller and larger pistons of a hydraulic press have diameters of 4 cm and 12 cm. What input force is required to lift a 4000 N weight with the output piston?
FoutFin AouttAin
; in out out inin
in out out
F F F AF
A A A
2
2
(4000 N)( )(2 cm)
(6 cm)inF
2; 2
DR Area R
F = 444 NF = 444 N
Rin= 2 cm; R = 6 cm
![Page 149: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/149.jpg)
149
Archimedes’ Principle
• An object that is completely or partially submerged in a fluid experiences an upward buoyant force equal to the weight of the fluid displaced.
2 kg
2 kg
The buoyant force is due to the displaced fluid.
The block material doesn’t matter.
![Page 150: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/150.jpg)
150
Calculating Buoyant Force
FB = f gVf
Buoyant Force:
h1
mg
Area
h2
FB
The buoyant force FB is due to the difference of pressure P between the top and bottom surfaces of the submerged block.
2 1 2 1; ( )BB
FP P P F A P P
A
2 1 2 1( ) ( )B f fF A P P A gh gh
2 1 2 1( ) ( ); ( )B f fF g A h h V A h h
Vf is volume of fluid displaced.
![Page 151: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/151.jpg)
151
Example 4: A 2-kg brass block is attached to a string and submerged underwater. Find the buoyant force FB and the tension in the rope T.
All forces are balanced:
mg
FB = gVT
Force diagram
FB + T = mg FB = wgVw
3
2 kg;
8700 kg/mb b
b bb b
m mV
V
Vb = Vw = 2.30 x 10-4 m3
Fb = (1000 kg/m3)(9.8 m/s2)(2.3 x 10-4 m3)
FB = 2.25 NFB = 2.25 N
![Page 152: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/152.jpg)
152
Example 4 (Cont.): A 2-kg brass block is attached to a string and submerged underwater. Now find
the tension in the rope. (T=?)
mg
FB = gVT
Force diagram
FB + T = mg T = mg - FB
FB = 2.25 NFB = 2.25 N
T = (2 kg)(9.8 m/s2) - 2.25 N
T = 19.6 N - 2.25 N
T = 17.3 NT = 17.3 N
This force is sometimes referred to as the apparent weight.
![Page 153: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/153.jpg)
153
Floating objects:
When an object floats, partially submerged, the buoyant force exactly balances the weight of the object.
FB
mg
FB = f gVf mx g = xVxg
f gVf = xVxg
f Vf = xVxf Vf = xVxFloating Objects:
If Vf is volume of displaced water Vwd, the relative density of an object x is given by:
Relative Density:x wd
rw x
V
V
![Page 154: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/154.jpg)
154
Example 5: A student floats in a salt lake with one-third of his body above the surface. If the density of his body is 970 kg/m3, what is the density of the lake water?
1/3
2/3
Assume the student’s volume is 3 m3.
Vs = 3 m3; Vwd = 2 m3; s = 970 kg/m3
w Vwd = sVsw Vwd = sVs
3
w3
32 m;
3 m 2s wd s
w s
V
V
3
w
3 3(970 kg/m )
2 2s
w = 1460 kg/m3w = 1460 kg/m3
![Page 155: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/155.jpg)
155
Problem Solving Strategy
1. Draw a figure. Identify givens and what is to be 1. Draw a figure. Identify givens and what is to be found. Use consistent units for P, V, A, and found. Use consistent units for P, V, A, and ..
2.2. Use absolute pressure PUse absolute pressure Pabsabs unless problem unless problem
involves a difference of pressure involves a difference of pressure P.P.
3.3. The difference in pressure The difference in pressure P is determined by P is determined by the density and depth of the fluid:the density and depth of the fluid:
2 1
m F; = ; P =
V AP P gh
![Page 156: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/156.jpg)
156
Problem Strategy (Cont.)
4.4. Archimedes’ Principle: A submerged or floating Archimedes’ Principle: A submerged or floating object experiences an object experiences an buoyant force buoyant force equal to the equal to the weight of the displaced fluid: weight of the displaced fluid:
4.4. Archimedes’ Principle: A submerged or floating Archimedes’ Principle: A submerged or floating object experiences an object experiences an buoyant force buoyant force equal to the equal to the weight of the displaced fluid: weight of the displaced fluid:
B f f fF m g gV
5. Remember: m, ρ and V refer to the displaced fluid. The buoyant force has nothing to do with the mass or density of the object in the fluid. (If the object is completely submerged, then its volume is equal to that of the fluid displaced.)
![Page 157: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/157.jpg)
157
Problem Strategy (Cont.)
6.6. For a floating object, FFor a floating object, FBB is is
equal to the weight of that equal to the weight of that object; i.e., the weight of the object; i.e., the weight of the object is equal to the weight object is equal to the weight of the displaced fluid: of the displaced fluid:
6.6. For a floating object, FFor a floating object, FBB is is
equal to the weight of that equal to the weight of that object; i.e., the weight of the object; i.e., the weight of the object is equal to the weight object is equal to the weight of the displaced fluid: of the displaced fluid:
x or x f x f fm g m g V V
FB
mg
![Page 158: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/158.jpg)
158
Summary
; mass m
Densityvolume V
31000 kg/mx
r
Pressure ; Force F
PArea A
Pressure ; Force F
PArea A
21 Pa = 1 N/mPascal:
P = ghFluid Pressure:
![Page 159: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/159.jpg)
159
Summary (Cont.)
FB = f gVf
Buoyant Force:Buoyant Force:Archimedes’ Archimedes’ Principle:Principle:
in out
in out
F F
A APascal’s Pascal’s
Law:Law:
![Page 160: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/160.jpg)
2.1 Fluids Statics
The general rules of statics ( as applied in solid mechanics) apply to fluids at rest . From earlier we know that:• a static fluid can have no shearing force acting on it, and that• any force between the fluid and the boundary must be acting at right angles to the boundary.
![Page 161: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/161.jpg)
Force normal to the boundary
![Page 162: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/162.jpg)
Pressure Force normal to the boundary•This statement is also true for curved surfaces, in this case the force acting at any point is normal to the surface at that point.
•This statement is also true for any imaginary plane in a static fluid
•We use this fact in our analysis by considering elements of fluid bounded by imaginaryPlanes.
![Page 163: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/163.jpg)
We also know that:
•For an element of fluid at rest, the element will be in equilibrium – the sum of the components of forces in any direction will be zero.• The sum of the moments of forces on the element about any point must also be zero.
![Page 164: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/164.jpg)
2.2. Pressure
• If the force exerted on each unit area of a boundary is the same, the pressure is said to be uniform.
![Page 165: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/165.jpg)
Example
![Page 166: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/166.jpg)
Pressure and manometersexercise 1.1
![Page 167: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/167.jpg)
Pressure and manometersexercise 1.2
![Page 168: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/168.jpg)
Pressure and manometersexercise 1.3
![Page 169: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/169.jpg)
Exercise 1.3
![Page 170: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/170.jpg)
Exercise 1.4
![Page 171: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/171.jpg)
Exercise 1.5
![Page 172: 1 Introduction to Fluid Mechanics. Chapter 1. Phys 404 Dr Nazir Mustapha.](https://reader033.fdocuments.net/reader033/viewer/2022061418/56649e795503460f94b79c2e/html5/thumbnails/172.jpg)
172
End of Chapter 2