1 Introduction lecture IEM program Leo van der Wegen (on behalf of Erwin Hans, Director of TBK and...
-
Upload
henry-simpson -
Category
Documents
-
view
215 -
download
1
Transcript of 1 Introduction lecture IEM program Leo van der Wegen (on behalf of Erwin Hans, Director of TBK and...
11
Introduction lectureIntroduction lectureIEM programIEM program
Leo van der Wegen Leo van der Wegen (on behalf of Erwin Hans,(on behalf of Erwin Hans,Director of TBK and IEM programs)Director of TBK and IEM programs)September 2013September 2013
22
ContentsContents IEMIEM IEM specializationsIEM specializations Structure of the programStructure of the program ElectivesElectives Role of specialization coordinatorRole of specialization coordinator Fraud is NOT toleratedFraud is NOT tolerated QuestionsQuestions Premaster programPremaster program Specialization specific informationSpecialization specific information
33
Industrial Engineering Industrial Engineering & Management (IEM)& Management (IEM) ImprovingImproving processes and systems processes and systems Modeling and quantitative Modeling and quantitative
analysis paradigmanalysis paradigm Applied in a variety of fields Applied in a variety of fields
(manufacturing, finance, logistics, (manufacturing, finance, logistics, telecommunications, healthcare)telecommunications, healthcare)
Multiple objectives (quality, Multiple objectives (quality, service, risk management, service, risk management, productivity, or safety)productivity, or safety)
44
IEMIEM
Multidisciplinary, with an open mind Multidisciplinary, with an open mind for:for:– Technology used in processesTechnology used in processes– Human behavior (individual and Human behavior (individual and
social) social) – Conditions in the environment of Conditions in the environment of
the organization (competitors, the organization (competitors, regulations, or government regulations, or government policies)policies)
55
Industrial Industrial EngineersEngineers
Work on real-world problemsWork on real-world problems Good math and quantitative skillsGood math and quantitative skills Combine knowledge from Combine knowledge from
different disciplines for designing different disciplines for designing solutionssolutions
Project-management expertiseProject-management expertise Communication skillsCommunication skills Creative, resourcefulCreative, resourceful
66
IEM specializationsIEM specializations
Production and Logistic ManagementProduction and Logistic Management Financial Engineering and MgmtFinancial Engineering and Mgmt (Information Technology and Mgmt)(Information Technology and Mgmt) Health Care Technology and MgmtHealth Care Technology and Mgmt
In fact each student has an individual In fact each student has an individual program to a certain extent. program to a certain extent.
77
ITM specialization ITM specialization discontinued in 2013-discontinued in 2013-20142014 In case you finished a premaster In case you finished a premaster
program to start the IEM-ITM program to start the IEM-ITM specialization this year, please specialization this year, please contact the specialization contact the specialization coordinator Fons Wijnhoven a.s.a.p.coordinator Fons Wijnhoven a.s.a.p.
RA 3341RA 3341 Telephone: 053-4893853Telephone: 053-4893853 [email protected]@utwente.nl
88
IEM specializationIEM specialization coordinators coordinators FEM: Dr. Berend Roorda FEM: Dr. Berend Roorda HCTM: Dr. Marjan HummelHCTM: Dr. Marjan Hummel PLM: Dr. Leo van der WegenPLM: Dr. Leo van der Wegen
99
Standard programStandard program
See Course Schedule IEM 2013-See Course Schedule IEM 2013-2014: 2014: http://www.utwente.nl/mb/en/educhttp://www.utwente.nl/mb/en/education/Programmes/master/iem/stuation/Programmes/master/iem/studyprogramme/studyprogIEM.docxdyprogramme/studyprogIEM.docx
You have a lot of freedom to adapt You have a lot of freedom to adapt it to your personal interests!it to your personal interests!
1010
120 EC120 EC
3 mandatory common courses: 15 ec3 mandatory common courses: 15 ec 7-8 specialization-specific courses: 7-8 specialization-specific courses:
35-40 ec35-40 ec 2 equalization courses: 10 ec2 equalization courses: 10 ec 6-5 electives: 30-25 ec6-5 electives: 30-25 ec Master’s thesis: 30 ecMaster’s thesis: 30 ec 4 quartiles of 15 ec = 60 ec/year4 quartiles of 15 ec = 60 ec/year 15 ec = 420 hrs = 10 weeks15 ec = 420 hrs = 10 weeks Each quarter has 3 courses of 5 ecEach quarter has 3 courses of 5 ec
1111
Common courses Common courses (mandatory)(mandatory)
Introduction to IEM Introduction to IEM Empirical research and data Empirical research and data
analysis analysis Preparation thesisPreparation thesis
1212
Equalization coursesEqualization courses To repair deficiencies, we have two so-To repair deficiencies, we have two so-
called “equalization courses”, early in called “equalization courses”, early in the programthe program
For students who have a Dutch BSc in For students who have a Dutch BSc in IEM: these are electivesIEM: these are electives
For other students: these courses are For other students: these courses are selected with you (no electives) as selected with you (no electives) as preparation for the specialization preparation for the specialization courses (Discuss with specialization courses (Discuss with specialization coordinator!)coordinator!)
1313
Electives Electives
Which electives can you choose? Other Which electives can you choose? Other IEM specialization courses and (almost) IEM specialization courses and (almost) any master course offered by EWI, any master course offered by EWI, CTW, or TNW (there may be constrains CTW, or TNW (there may be constrains from their side (prior knowledge) or from their side (prior knowledge) or from our side (overlap)) from our side (overlap))
Master courses from other Master courses from other (inter)national technical programmes(inter)national technical programmes
Discuss with specialization coordinator!Discuss with specialization coordinator!
1414
Electives (2)Electives (2)
““Industrial Engineering” is a much Industrial Engineering” is a much broader field at the University of broader field at the University of TwenteTwente
Applied MathematicsApplied Mathematics Business Info TechnologyBusiness Info Technology Computer ScienceComputer Science Mechanical EngineeringMechanical Engineering Civil Engineering & MgmtCivil Engineering & Mgmt Industrial Design EngineeringIndustrial Design Engineering Biomedical EngineeringBiomedical Engineering
1515
Electives (3)Electives (3)Study abroad Study abroad Erasmus programmeErasmus programme Contact Inge van Haare and Contact Inge van Haare and
specialization coordinator in an specialization coordinator in an early stageearly stage
Approval from examination Approval from examination committee neededcommittee needed
Examples: LinkExamples: Linköping, Gothenburgöping, Gothenburg
1616
Preparation ThesisPreparation Thesis
Start iStart in n first year first year M1.2 (Intro IEM) M1.2 (Intro IEM) Portfolio: individual assignments for Portfolio: individual assignments for (research) orientation during the (research) orientation during the year:year:– Approved study programme – Research about job areas and
positions for IEM graduates– Assessment of a finished MSc thesis
– Review of a scientific paper
1717
Preparation Thesis (2)Preparation Thesis (2)
IIn n second year: second year: (M2.1) Portfolio(M2.1) Portfolio Obtaining Master assignment (M2) Motivation letter for the master
assignment Individual study programme and the
related agreements with the specialization coordinator
Overview of study grades and study progress
1818
Preparation Thesis (3)Preparation Thesis (3)
IIn n second year: second year: (M2.2)(M2.2) Finalizing portfolio Preparing Master assignment
– Literature study– Organisation visits – Plan of approach
Grading preparation course by thesis supervisor
Preparation Thesis (4)Preparation Thesis (4)
Individual course Individual course No lecturesNo lectures Can be finished any quartileCan be finished any quartile You can formally start your You can formally start your
master thesis project ONLY IF this master thesis project ONLY IF this course is finished, i.e if your plan course is finished, i.e if your plan of approach is approved by your of approach is approved by your thesis supervisor. thesis supervisor.
1919
Preparation Thesis (5)Preparation Thesis (5)
MSc syllabus available in MSc syllabus available in November via the Intro IEM Bb November via the Intro IEM Bb sitesite
Start M1 acitivities in Intro IEM Start M1 acitivities in Intro IEM 20132013
For students starting IEM in For students starting IEM in February 2014, instructions will February 2014, instructions will followfollow
2020
2121
Final projectFinal project
Final projects are usually Final projects are usually conducted outside the universityconducted outside the university
Challenging: real organization, real Challenging: real organization, real problem, so you need to provide a problem, so you need to provide a real contributionreal contribution
Start early finding an internship for Start early finding an internship for your final project (M2.1 or earlier)your final project (M2.1 or earlier)
Ask practical advice on resume, Ask practical advice on resume, letter, contacts, etc.letter, contacts, etc.
2222
Final project Final project coordinatorscoordinators FEM: Dr. Berend Roorda FEM: Dr. Berend Roorda (ITM: Dr. Fons Wijnhoven)(ITM: Dr. Fons Wijnhoven) HCTM: Dr. Marjan HummelHCTM: Dr. Marjan Hummel PLM: Dr. Marco SchuttenPLM: Dr. Marco Schutten
2323
Individual program Individual program adjustmentsadjustments If you have ideas about your If you have ideas about your
individual study program that go individual study program that go beyond the standard conditions: beyond the standard conditions: make a proposal! We welcome make a proposal! We welcome your initiativesyour initiatives
Discuss with specialization Discuss with specialization coordinator or program directorcoordinator or program director
(You always complete 120 ec, so (You always complete 120 ec, so there are no exemptions)there are no exemptions)
2424
ProactiveProactive
We welcome diversity and invite We welcome diversity and invite ideas for taking coursesideas for taking courses
Some courses will require more Some courses will require more than the standard workload for than the standard workload for some individuals (and less for some individuals (and less for others)others)
Be proactive when it comes to Be proactive when it comes to planning, electives, required planning, electives, required advance knowledge, etc.advance knowledge, etc.
2525
ROLE OF SPECIALIZATIONROLE OF SPECIALIZATION COORDINATOR (1) COORDINATOR (1) Advice on and approval ofAdvice on and approval of
– Pre-master coursesPre-master courses– Equalization coursesEqualization courses– Study plansStudy plans– ElectivesElectives
Specialization coordinator sends Specialization coordinator sends this information to BOZ (student this information to BOZ (student administration) accompanied by a administration) accompanied by a study planstudy plan
2626
STUDY PLANSTUDY PLAN What courses are studied when?What courses are studied when? No more than 4 courses per quarterNo more than 4 courses per quarter Check preliminary knowledgeCheck preliminary knowledge Study seriously!Study seriously!
NoteNote: There will always be some : There will always be some knowledge gaps, so, if necessary, knowledge gaps, so, if necessary, search for literature and study a topic search for literature and study a topic yourself!yourself!
2727
ROLE OF SPECIALIZATIONROLE OF SPECIALIZATION COORDINATOR (2) COORDINATOR (2) Advice on individual master Advice on individual master
programme, e.g. programme, e.g. Combination of 2 specializationsCombination of 2 specializations Taking courses at other Taking courses at other
universitiesuniversities Study abroad for one semesterStudy abroad for one semester Approval via examination Approval via examination
committee, positive advice from committee, positive advice from specialization coordinator neededspecialization coordinator needed
2828
FRAUD IS NOT FRAUD IS NOT TOLERATEDTOLERATED Using unauthorized aids like mobile Using unauthorized aids like mobile
phones or calculatorsphones or calculators Consulting someone else’s notesConsulting someone else’s notes Committing forgery Committing forgery Plagiarism = copying without crediting Plagiarism = copying without crediting
the source (internet, books, articles, the source (internet, books, articles, reports from other students,…)reports from other students,…)
Punishment: exclusion from exams for Punishment: exclusion from exams for a whole year!a whole year!
2929
Questions, where to Questions, where to go?go? Equalization courses, electives, Equalization courses, electives,
planning your pre-master courses: planning your pre-master courses: specialization coordinatorspecialization coordinator
Other questions about planning, Other questions about planning, rules, personal circumstances: rules, personal circumstances: study advisor study advisor (Cornelis ten Napel)(Cornelis ten Napel)
Other issues: Other issues: program coordinatorprogram coordinator (Mrs. Bernadette Pol) or (Mrs. Bernadette Pol) or program program directordirector
3030
Premaster programPremaster program
30 ec bachelor courses30 ec bachelor courses Math, Probability & statistics Math, Probability & statistics Courses specific for specializationCourses specific for specialization
Maximum two exams per courseMaximum two exams per course Pass within one year!Pass within one year! Start with IEM either in February Start with IEM either in February
2014 or September 2014 (easier!)2014 or September 2014 (easier!)
3131
Specialization specific Specialization specific informationinformation PLMPLM FEMFEM HCTMHCTM Some special “topics”:Some special “topics”:
– Technology Venturing and Technology Venturing and Innovation Management (BA)Innovation Management (BA)
– Maintenance (ME)Maintenance (ME)– ITM courses offered by BITITM courses offered by BIT
3232
Specialization specific Specialization specific informationinformation
Remark: Remark: There exists a strict separation There exists a strict separation of Bachelor and Master programsof Bachelor and Master programs
If Corporate Finance or SMOM are If Corporate Finance or SMOM are equalization courses for you and you did equalization courses for you and you did not pass them before August 31, 2013, not pass them before August 31, 2013, you have to take the following courses:you have to take the following courses:– CF IEM MSc (201300019)CF IEM MSc (201300019)– SMOM MSc (201300095)SMOM MSc (201300095)
3333
PRODUCTION AND PRODUCTION AND LOGISTIC LOGISTIC MANAGEMENTMANAGEMENT Specialization coordinator Leo Specialization coordinator Leo
van der Wegenvan der Wegen RA 3355RA 3355 Telephone: 053-4893501Telephone: 053-4893501 [email protected]@utwente.nl
3434
PRODUCTION AND PRODUCTION AND LOGISTIC MANAGEMENTLOGISTIC MANAGEMENT Focuses on design and control of Focuses on design and control of
logistic processes in the entire supply logistic processes in the entire supply chain e.g. production planning, chain e.g. production planning, transportation planning, network transportation planning, network design, purchasing, reverse logistics,…design, purchasing, reverse logistics,…
Modeling, quantitative analysisModeling, quantitative analysis Performance oriented (costs, service,Performance oriented (costs, service,
…)…) Application of operations management Application of operations management
in (i) healthcare (ii) service logisticsin (i) healthcare (ii) service logistics
3535
PROGRAMPROGRAM
Two courses are mainly method Two courses are mainly method oriented (Discrete optimization of oriented (Discrete optimization of business processes, Simulation) business processes, Simulation)
Most other courses focus on areas Most other courses focus on areas within logistics and on applications within logistics and on applications (Warehousing, APP, Purchasing, SCTM, (Warehousing, APP, Purchasing, SCTM, RLRM, OHCP2,…)RLRM, OHCP2,…)
Equalization courses (10 ec)Equalization courses (10 ec) Master’s thesis (30 ec)Master’s thesis (30 ec) ElectivesElectives
3636
PROGRAM (mandatory)PROGRAM (mandatory)
191506103 Statistics and Probability
191820200 Discrete Optimization of Business Processes
191820210 Simulation
191820190 Supply Chain - & Transport Management
191852620 Advanced Production Planning
191820120 Warehousing
201100163 Management of Technology for PLM
3737
ELECTIVES (examples)ELECTIVES (examples)
191820160 Purchasing
191820180 Reverse Logistics & re-manufacturing
194121020 Optimization of Healthcare Processes
191852630Reliability engineering & Maintenance
management
194122030 New Production Concepts
3838
ELECTIVES (examples)ELECTIVES (examples)
192850730 Governing Product 192850730 Governing Product DevelopmentDevelopment
192850740 Product Life Cycle 192850740 Product Life Cycle 191102040 Manufacturing Facility Design191102040 Manufacturing Facility Design 191581420 Optimization Modelling191581420 Optimization Modelling 191531830 Stochastic Models in 191531830 Stochastic Models in
Production and LogisticsProduction and Logistics 195810600 Project Control & Risk 195810600 Project Control & Risk
managementmanagement 201100010 Intelligent Transport Systems 201100010 Intelligent Transport Systems 195810200 SCM & ICT195810200 SCM & ICT
3939
ELECTIVES ELECTIVES
The course “Design of production The course “Design of production and inventory systems (191124720)” and inventory systems (191124720)” is NOT allowed as elective for is NOT allowed as elective for students that finished Logistic students that finished Logistic Management and Production Management and Production Management (e.g. BSc-IEM students). Management (e.g. BSc-IEM students). Other students, please contact the Other students, please contact the specialization coordinator! specialization coordinator!
4040
FINANCIAL ENGINEERING FINANCIAL ENGINEERING AND MANAGEMENTAND MANAGEMENT Specialization coordinator Berend Specialization coordinator Berend
RoordaRoorda
Telephone: 053-4894383Telephone: 053-4894383 RA 3349RA 3349 [email protected]@utwente.nl
41414141
FINANCIAL ENGINEERING FINANCIAL ENGINEERING AND MANAGEMENTAND MANAGEMENT
How to deal with financial risk and How to deal with financial risk and trading these?trading these?
DomainDomain banksbanks ... insurance ... pension ... insurance ... pension
fundsfunds ProductsProducts shares shares ... derivatives ... structured ... derivatives ... structured
productsproducts PerspectivePerspective trading trading ... hedging ... risk ... hedging ... risk
managementmanagement
4242
PROGRAM (mandatory)PROGRAM (mandatory)
191515603 Introduction to Investment Theory
191506103 Statistics and probability
191515201 Mathematical Finance
191599850 Special topics in Financial Engineering
191860181 Risk management
191570300 Structured Products
201100162 Management of Technology for FEM
4343
ELECTIVES (examples)ELECTIVES (examples)
191860651 Micro Economics
191861641 Financial accounting
191515101 Introduction to Risk Theory
201000202 Management Control for Financial Institutions
191820210 Simulation
4444
HEALTH CARE HEALTH CARE TECHNOLOGY AND TECHNOLOGY AND MANAGEMENTMANAGEMENT Specialization coordinator Marjan Specialization coordinator Marjan
HummelHummel RA 5248RA 5248 Telephone: 053-4893340Telephone: 053-4893340 [email protected]@utwente.nl
4545
HEALTH CARE HEALTH CARE TECHNOLOGY AND TECHNOLOGY AND MANAGEMENTMANAGEMENT Focuses on hospitals (health Focuses on hospitals (health
organizations)organizations) Improving health care processesImproving health care processes Implementation and evaluation of Implementation and evaluation of
new biomedical technology new biomedical technology Market and technology Market and technology
development for biotechdevelopment for biotech
4646
PROGRAM (mandatory)PROGRAM (mandatory)
191820200191506103
Discrete Optimization of Business ProcessesStatistics and probability
191820210 Simulation
194121020 Optimization of Healthcare Processes
194112110 Health & Health Systems
193640070 Clinical Safety and Quality Assurance
192360501 E-health strategies
201000182 Management of Technology for Health Care
4747
ELECTIVES (examples)ELECTIVES (examples)
194111210 Medical decision making
194111220 Clinical efficacy & MTA
191820160 Purchasing
194112170 Quality and Safety in Health Care
191820120 Warehousing
4848
Specialization specific Specialization specific informationinformation Some special “topics”:Some special “topics”:
– Technology Venturing and Technology Venturing and Innovation Management (BA), Innovation Management (BA), can be taken ONLY as a packagecan be taken ONLY as a package
– Maintenance (ME), courses can Maintenance (ME), courses can be chosen separatelybe chosen separately
– ITM courses offered by BIT (ITM ITM courses offered by BIT (ITM students, please contact Fons students, please contact Fons Wijnhoven a.s.a.p)Wijnhoven a.s.a.p)
Technology Venturing Technology Venturing and Innovation and Innovation ManagementManagement
4949
191810840Management of Organisation, Operations and Technological Innovation
194108040Business Development in Network Perspective
three or four of the below mentioned courses:
194111500 a) Innovation & Technology Dynamics
194108030 b) Principles of Entrepreneurship
194120140 c) HRM, Innovation & Entrepreneurship
201000087 d) Entrepreneurial Finance
201000156 e) International entrepreneurship
201100054 f ) Supply Chain Management & Innovation
Maintenance & service Maintenance & service logisticslogistics
5050
201200146Q1: Maintenance Engineering & Management(Introductory course into maint. & service logistics)
191820180Q2: Reverse Logistics & Re-Manufacturing(Covering a.o. after-sales service logistics)
201300038Q2: Failure Mechanisms & Life Prediction(Technical course: faculty engineering technology)
191852630 Q3: Reliability Engineering & Maint. Management
201300039Q4: Structural Health & Condition Monitoring(Technical course: faculty engineering technology)
Maintenance & service Maintenance & service logisticslogistics
5151
It is possible to choose just one or two courses instead of five. Advice: start with MEM if you choose a package.
Smaller coherent sets are, with a focus on Industrial Engineering:•Maintenance Engineering & Management (Q1)•Reverse Logistics & Re-Manufacturing (Q2)•Reliability Engineering & Maintenance Management (Q3)
Or, with a focus on Mechanical Engineering:•Maintenance Engineering & Management (Q1)•Failure Mechanisms & Life Prediction (Q2)•Structural Health & Condition Monitoring (Q4)
For more information, contact Rob Basten ([email protected]) or Matthieu van der Heijden ([email protected])
52525252
ITM courses within BITITM courses within BIT191863960 Foundation of Information systems
192376500 Business Process Integration Lab
new Information Markets
192340101 Implementation of IT in organizations
192376000 Business Case Development for IT Projects
192320501 Electronic commerce
192360021 ICT Management
201100052 Global Project Management
5353
QUESTIONSQUESTIONS
?