1 HP-TOOLS

HAND AND POWER TOOLS

2 HP-TOOLS

CONTENTS

General Requirements

Power Tools

Pneumatic Tools

Hand Tools

Powder/Cartridge Actuated Tools

3 HP-TOOLS

OVERVIEW

Hand and power tools have become vital components in nearly all tasks we do.

For this reason, training on the correct use of hand and power tools is essential.

4 HP-TOOLS

OBJECTIVE

In the following sections we will look at both general and specific requirements to be followed when using hand and power tools.

5 HP-TOOLS

EMPLOYEE PROTECTION

Use of hand tools around electrical equipment

Use of hand tools when working from elevations

Do not use cheater bars

Do not pull towards your face

6 HP-TOOLS

EMPLOYEE PROTECTION

Never hold a tool while it is being struck by someone else

Always use the correct tool for the job

Report any damaged or defective equipment

7 HP-TOOLS

EMPLOYEE PROTECTION

Be comfortable with the equipment you are using

Ensure all power has been isolated before changing or repairing any parts of the equipment

8 HP-TOOLS

EMPLOYEE PROTECTION

Always inspect equipment before use

Storage of equipment

Safe Plan of Action (SPA)

9 HP-TOOLS

POWER TOOLS

Inspect before use 110v Heavy duty power tools must have second handle Secure all material being worked on Extension cords

10 HP-TOOLS

POWER TOOLS

Ensure guards are in place

Raising / lowering power tools

Emergency Off (EMO) foot pedals

PPE requirements

220v cables must have an RCD protection

Identified by company name

11 HP-TOOLS

PNEUMATIC TOOLS

Follow manufacture’s guidelines Inspect equipment before use Ensure good connection to air supply Personal Protection Equipment (PPE)

requirements Identified by company name

12 HP-TOOLS

HAND TOOLS

Screwdrivers Hammers Pliers Wrenches

Chisels / Punches Pry Bars Files Knives

13 HP-TOOLS

SCREWDRIVERS

Selection / Inspection / Rejection (SIR) Do not use a pry bar Never hold your work in your hand Do not hammer on the end of a screwdriver Insulation rating for electrical work

14 HP-TOOLS

HAMMERS

Selection / Inspection / Rejection (SIR)

Do not “choke” the hammer

Never allow someone to hold an object you will be hitting with a hammer

15 HP-TOOLS

PLIERS

Selection / Inspection / Rejection (SIR)

Avoid using pliers on hardened surfaces

Do not use for tightening or loosening nuts and bolts

Never pull towards your face

16 HP-TOOLS

WRENCHES

Selection / Inspection / Rejection (SIR)

Never pull towards your face

Ensure snug fit

Do not use cheater bar

17 HP-TOOLS

CHISELS / PUNCHES

Selection / Inspection / Rejection (SIR)

Use the correct hammer and keep your focus

Beware of mushroomed heads

Personal Protection Equipment (PPE)

Proper storage

18 HP-TOOLS

PRY BARS

Selection / Inspection / Rejections (SIR)

Bite of the bar

Maintain good balance

Check the work area

Do not use cheater bar

19 HP-TOOLS

FILES

Selection / Inspection / Rejection (SIR)

Ensure handles are fitted

Do not use as pry bars

Storage

20 HP-TOOLS

KNIVES

Selection / Inspection / Rejection (SIR)

Retractable blades

PPE requirements

Cut away from your body

Do not use your leg as a rest

21 HP-TOOLS

POWDER / CARTRIDGE OPERATED TOOLS

Selection / Inspection / rejection (SIR)

Specific training requirements

Manufacturing guidelines

PPE requirements

Signage

Do not leave tools loaded

Proper storage

22 HP-TOOLS

CONCLUSION

Please SIR Follow general requirements Training Never hold a tool while it is being struck by

someone else Report any damaged or defective equipment Portable power tools (110v) 220v cables must be RCD protected