1 EZ-Boom Florent CiracqTraining Specialist EMEA 26th March 2009.
-
Upload
jose-lopez -
Category
Documents
-
view
216 -
download
0
Transcript of 1 EZ-Boom Florent CiracqTraining Specialist EMEA 26th March 2009.
1
EZ-Boom
Florent Ciracq Training Specialist EMEA
26th March 2009
2
EZ Boom
3
Automatic Boom Section Control
4
EZ-Boom 2010 has two main functions:
Automated Boom Section control User definable from 1 to 10 sections Detects already sprayed areas and turns off boom sections
accordingly Sections can vary in width independently
Rate Control Adjusts the flow control valve to achieve Target Rate using:
User defined Target Rate - can be a prescription when used with the FieldManager Display
Vehicle speed (GPS) Boom width (which varies as the sections get turned off/on)
Automatic Section Control
5
Automatic Section Control Only Sprayers
Pull TypeSelf Propelled
EZ Boom (Designed in EU)
6
Hardware Option
7
Display Options
• EZ-Guide Plus
• EZ-Guide 500
• Field Manager Display • FM-1000
8
EZ-Guide 500 interface
9
EZ-Guide 500 interface
10
Field Manager Display interface
11
Controls
12
The connectivity options are Spa Coupe
Connecting to the implement
13
Demonstration installation
14
Run –Time Screen
EZ-Guide 500 Interface
15
500 Interface
16
RTF Reports Applied Rate GPS Quality Height Overlap
Similar to FMD, FM-1000
500 Interface
17
EZ-Guide 500 Interface
Configuration Boom Set-Up
18
EZ-Guide 500 Interface
Valve on latency – The time is takes to the system to start spraying once it switched on.
Valve latency off – The time it takes for the system to stop spraying once it is turned off.
Intension overlap – Metres or inches of overlap
19
Questions