1 EE 188L Lab #2 Test Bench Photos. 2 Vout R1 R5 R4 R3 R2 1 2 3 4 5 6 8 7 C2 C1 R7 R6 At this end...
-
date post
21-Dec-2015 -
Category
Documents
-
view
213 -
download
0
Transcript of 1 EE 188L Lab #2 Test Bench Photos. 2 Vout R1 R5 R4 R3 R2 1 2 3 4 5 6 8 7 C2 C1 R7 R6 At this end...
2Vout
R1
R5
R4
R3
R2
1
2
3
4 5
6
8
7
C2
C1
R7
R6
At this end there will be a cut-outand/or a dot next
to pin 1
-15V
ground
+15V
ground
Vin
Example Circuit Layout
withProtoboard
3
Measuring Resistance with Measuring Resistance with the DMMthe DMM
1. Red probe is in correct position2. Make sure the button with is pressed3. Place red and black probes on two terminals of resistance4. Read value of resistance on display and note the units
5
OscilloscopeAlways adjust the scope to obtain as large of a waveform as possible (to maximize accuracy)
Adjust the FOCUS and INTENSITY to obtain a clear, readable display.
When not actively observing waveforms, turn down the intensity to extend the life of the scope screen
Function buttons
OscilloscopePower
Auto button