1 API SC6 Winter Meeting Update on CSOEM MARG Activities Tim Haeberle Chief Consulting Engineer –...
-
Upload
lucy-thornton -
Category
Documents
-
view
214 -
download
1
Transcript of 1 API SC6 Winter Meeting Update on CSOEM MARG Activities Tim Haeberle Chief Consulting Engineer –...
1
API SC6 Winter MeetingUpdate on CSOEM MARG Activities
Tim HaeberleChief Consulting Engineer – Materials and
ProcessesGE Oil & Gas4 February 2015
2
Development Of New Hardness Conversion Tables For ASTM E140
• API CSOEM approved formation of new Task Group - Haeberle Chair • API has approved funding for testing
• PH Ni alloys, select martensitic SS, duplex SS and super duplex SS
• ASTM E28.06 approved formation of new Task Group - Haeberle Chair
• ASTM Task Group to work on this issue and the adoption of test data developed through the API test program
• ASTM members have volunteered to participate
• Development of a formal round robin test procedure is ongoing
3
Temperature De-Rated Mechanical Properties For HPHT• API CSOEM approved formation of new Task Group – Bill Bailey Chair • $150K approved for initial tests to be used to define HPHT test program
• Planning:• First, test the most frequently used HPHT material (Alloy 718 - 120K)• Test all mechanical properties & orientations, but no environmental
tests• Minimize testing required for other alloys in the future• Eliminate test variables that can introduce data scatter• Review test plan for statistical validity• No tubing for initial testing• Several mills and distributors willing to donate Alloy 718 for testing• Pre-machining - assure same radial location• Results from a survey sent to potential labs is being evaluating• Will request select test labs to provide firm quotes
4
Grade 660D Elevated Temperature Tensile Testing
• Grade 660 derating values were removed from App G in API 6A Errata 6
• API CSOEM approved formation of new Task Group and approved funding - Haeberle Chair
• Elevated temperature tensile testing of Grade 660D is full scope
• Performing aging study to see if aging explains data trend in App G
• Will utilize findings from HPHT Task Group to select lab(s) and define test procedure
• After aging study, will perform the elevated temperature testing required
5
CSOEM MARG Project Ranking: How the ranking was done Ref Description of Materials Project
Project Ranking
Project Ranking
Project Ranking
Project Ranking
Project Ranking
Project Ranking
Project Ranking
Project Ranking
1API Spec 6A 21st Edition Materials Issues
H H M L M H M H 19
2ISO Maintenance Panel for NACE MR0175 reviewing CRA overlay requirements L H H L M H M H 18
3Low Alloy Steel forging specification for use in subsea applications
H M L M M M M M 16
4Should the Materials Section in 17A be moved to a separate Materials document? M M M L H 10
5Material Callouts conflicting with other Standards – 17G
M L M L M H 11
6Develop a listing of API Modified alloys with chemistries for use by various SC’s H M M H M M M M 18
7
NDT – requirements either not included in standards or vary. Develop uniform NDE standards for bar and tube, including test methods
H H H H H H M H 23
8CRA – API should use a definition for CRA that is consistent with ANSI/NACE MR01-75 L M H H M L H M 17
9Elevated Temperature Performance of OCTG Materials.
H H M H H H H H 23
6
CSOEM MARG Project Ranking: Results And Status
Project Score Sponsor Status
NDT – Requirements either not included in standards or vary. Develop uniform NDE standards for bar and tube, including test methods
23 SC19 John Elwell John Elwell to draft scope and solicit a Chairman.No action required by SC6
Elevated Temperature Performance of OCTG Materials. 23 SC5 Gustavo Turconi Testing ongoing. Pipe only.No action required by SC6
API Spec 6A 21st Edition Materials Issues 19 SC6 Tim Haeberle Already being worked by SC6
Develop a listing of API Modified alloys with chemistries for use by various SC’s 18 SC19 John Elwell No update in New Orleans.
No action required by SC6
ISO Maintenance Panel for NACE MR0175 reviewing CRA overlay requirements 17 SC6 Tim Haeberle
ISO & NACE still working on issue. API funding of environ. cracking tests may be helpful. No action required by SC6
CRA – API should use a definition for CRA that is consistent with ANSI/NACE MR01-75
Low Alloy Steel Forgings for Subsea
17
16
SC19 John Elwell
SC17 Brian Skeels Bruce Witwer
API SC6 should consider
No update in New Orleans.No action required by SC6