1 310 nm AlGaInAs MQW-DFB LASER DIODE FOR 10 Gb/s ... · While NEC Electronics endeavors to enhance...
Transcript of 1 310 nm AlGaInAs MQW-DFB LASER DIODE FOR 10 Gb/s ... · While NEC Electronics endeavors to enhance...
LASER DIODE
NX8341 Series1 310 nm AlGaInAs MQW-DFB LASER DIODE
FOR 10 Gb/s APPLICATION
DESCRIPTION
The NX8341 Series is a 1 310 nm Multiple Quantum Well (MQW) structured Distributed Feed-Back (DFB) laser diode TOSA (transmitter optical subassembly) with InGaAs monitor PIN-PD in a receptacle type package designed for XENPAK/XPAK/X2/XFP transceiver.
APPLICATIONS • 10 G BASE-LW/LR • 10 G Fiber Channel
FEATURES • Internal optical isolator • Optical output power Pf = −2 dBm • Low threshold current lth = 8 mA TYP. @ TC = 25°C • Wide operating temperature range TC = −5 to +85°C • InGaAs monitor PIN-PD
The mark <R> shows major revised points. The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
Document No. PL10525EJ03V0DS (3rd edition) Date Published February 2007 NS CP(N) 2004, 2007
DISCO
NTINUED
NX8341 Series
PACKAGE DIMENSIONS (UNIT : mm)
<R> NX8341TB/TP
(4.0
5)
5.55
5.15
8.7
0.55
1.75
1.35
1.3
3±0.
11.
0±0.
2
OPTICALREFERENCEPLANE
GND surface
Signal surface
3.5±0.1φ
3.5±0.1φ
5.2±0.05φ
5.2±0.05φ
5.6±0.05φ
5.0φ
2.99φ
2.92φ
Remarks1. Receptacle is electrically isolated from CAN.2. Characteristic impedance of flexible printed circuit is 25 Ω.3. NX8341TP has no matching resistor installed.
BOTTOM VIEW
18.1
7
4.65
2.8
2–3.
77
1.5
2–1.
6
6–0.45
5–0.79
5.7
0.13
6–R0.15
φ18– 0.2
φ2– 0.5
PD
Cat
hode
GN
DLD
Cat
hode
LD A
node
GN
DN
C
GNDGND
0.28±0.1
5.6
Data Sheet PL10525EJ03V0DS 2
DISCO
NTINUED
NX8341 Series
NX8341TJ
5.55
3±0.
11.
0±0.
2
GND surface
Signal surface
5.2±0.05φ
5.2±0.05φ
5.6±0.05φ
2.92±0.05φ
4.04
5±0.
05
6.99
±0.
2
12.5
5 T
YP
.
1.1±
0.05
0.55
±0.
05
OPTICALREFERENCEPLANE
3.4±0.03φ
4.75±0.1φ
⊥ 0.03 A
A
Remark Characteristic impedance of flexible printed circuit is 25 Ω.
BOTTOM VIEW
18.1
7
4.65
2.8
2–3.
77
1.5
2–1.
6
6–0.45
5–0.79
5.7
0.13
6–R0.15
φ18– 0.2
φ2– 0.5
PD
Cat
hode
GN
DLD
Cat
hode
LD A
node
GN
DN
C
GNDGND
0.28±0.1
5.6
Data Sheet PL10525EJ03V0DS 3
DISCO
NTINUED
NX8341 Series
NX8341TL
6.94
±0.
05
11.6
±0.
25.
5517
.15
TY
P.
0.55
±0.
053±
0.1
OPTICALREFERENCEPLANE
4.7±0.05φ
7.4±0.1φ
4.64±0.05φ
GND surface
Signal surface
5.6±0.05φ
5.2±0.05φ
5.2±0.05φ
1.0±
0.2
Remark Characteristic impedance of flexible printed circuit is 25 Ω.
BOTTOM VIEW
18.1
7
4.65
2.8
2–3.
77
1.5
2–1.
6
6–0.45
5–0.79
5.7
0.13
6–R0.15
φ18– 0.2
φ2– 0.5
PD
Cat
hode
GN
DLD
Cat
hode
LD A
node
GN
DN
C
GNDGND
0.28±0.1
5.6
Data Sheet PL10525EJ03V0DS 4
DISCO
NTINUED
NX8341 Series
NX8341UB
(4.0
5)
5.55
5.15
8.7
0.55
1.75
1.35
1.3
3±0.
11.
0±0.
2OPTICALREFERENCEPLANE
3.5±0.1φ
3.5±0.1φ
5.2±0.05φ
5.2±0.05φ
5.0φ
2.99φ
2.92φ
14.5
±0.
6
P.C.D
2.7±0.2φ
5– 0.3±0.05φ
5.6±0.05φ
Remark Receptacle is electrically isolated from CAN.
BOTTOM VIEW
1 2
345
1 2
5
10 Ω 10 Ω
3
4
LD
PD
G
PIN CONNECTIONS
Data Sheet PL10525EJ03V0DS 5
DISCO
NTINUED
NX8341 Series
PIN CONNECTIONS
BOTTOM VIEW
1 2
34
5
1 2
5 20 Ω3
4
LD PDL
G
NX8341UH
2.92±0.05φ
4.04
5±0.
05
6.99
±0.
25.
55
12.5
5 T
YP
.14
.5±
0.6
0.55
±0.0
5
1.1±
0.05
1.0±
0.2
3.0±
0.1
P.C.D
OPTICALREFERENCEPLANE
3.4±0.03φ
2.7±0.2φ
5– 0.3±0.05φ
5.6±0.05φ
4.75±0.1
⊥ 0.03 A
A
5.2±0.05φ
5.2±0.05φ
Data Sheet PL10525EJ03V0DS 6
DISCO
NTINUED
NX8341 Series
NX8341UJ
BOTTOM VIEW
1 2
345
1 2
5
10 Ω 10 Ω
3
4
LD
PD
G
PIN CONNECTIONS
2.92±0.05φ
4.04
5±0.
05
6.99
±0.
25.
55
12.5
5 T
YP
.14
.5±
0.6
0.55
±0.0
5
1.1±
0.05
1.0±
0.2
3.0±
0.1
P.C.D
OPTICALREFERENCEPLANE
3.4±0.03φ
2.7±0.2φ
5– 0.3±0.05φ
5.6±0.05φ
4.75±0.1
⊥ 0.03 A
A
5.2±0.05φ
5.2±0.05φ
Data Sheet PL10525EJ03V0DS 7
DISCO
NTINUED
NX8341 Series
NX8341UL
6.94
±0.
05
11.6
±0.
25.
5517
.15
TY
P.
14.5
±0.
6
0.55
±0.
053.
0±0.
1
1.0±
0.2
OPTICALREFERENCEPLANE
2.7±0.2φ
5.6±0.05φ
4.7±0.05φ
7.4±0.1φ
P.C.D
5– 0.3±0.05φ
4.64±0.05φ
5.2±0.05φ
5.2±0.05φ
BOTTOM VIEW
1 2
345
1 2
5
10 Ω 10 Ω
3
4
LD
PD
G
PIN CONNECTIONS
Data Sheet PL10525EJ03V0DS 8
DISCO
NTINUED
NX8341 Series
PIN CONNECTIONS
BOTTOM VIEW
NX8341UN
1 2
34
5
1 2
5 20 Ω3
4
LD PDL
G
6.94
±0.
05
11.6
±0.
25.
5517
.15
TY
P.
14.5
±0.
6
0.55
±0.
053.
0±0.
1
1.0±
0.2
OPTICALREFERENCEPLANE
2.7±0.2φ
5.6±0.05φ
4.7±0.05φ
7.4±0.1φ
P.C.D
5– 0.3±0.05φ
4.64±0.05φ
5.2±0.05φ
5.2±0.05φ
Data Sheet PL10525EJ03V0DS 9
DISCO
NTINUED
NX8341 Series
ORDERING INFORMATION
Part Number Receptacle Type Note
NX8341TB-AZ* LC, Electrically isolated Differential input with flexible PCB
NX8341TJ-AZ* LC Differential input with flexible PCB
NX8341TL-AZ* SC Differential input with flexible PCB
NX8341TP-AZ* LC, Electrically isolated Differential input with flexible PCB, without matching resistor
NX8341UB-AZ* LC, Electrically isolated Differential input, 5-pin
NX8341UH-AZ* LC Single-ended, 5-pin
NX8341UJ-AZ* LC Differential input, 5-pin
NX8341UL-AZ* SC Differential input, 5-pin
NX8341UN-AZ* SC Single-ended, 5-pin
<R>
*Note Please refer to the last page of this data sheet “Compliance with
EU Directives for Pb-Free RoHS Compliance Information.
ABSOLUTE MAXIMUM RATINGS
Parameter Symbol Ratings Unit
Storage Temperature Tstg −40 to +85 °C
Operating Case Temperature TC −5 to +85 °C
Forward Current of LD IFLD 120 mA
Reverse Voltage of LD VRLD 2 V
Forward Current of PD IFPD 10 mA
Reverse Voltage of PD VRPD 20 V
Lead Soldering Temperature Tsld 350 (3.5 sec.) °C
Optical Output Power Pf 5 mW
Data Sheet PL10525EJ03V0DS 10
DISCO
NTINUED
NX8341 Series
ELECTRO-OPTICAL CHARACTERISTICS (TC = −5 to +85°C, BOL, unless otherwise specified)
Parameter Symbol Conditions MIN. TYP. MAX. Unit
Mean Optical Output Power Pf −2 dBm
Peak Emission Wavelength λp CW, Pf = −2 dBm 1 290 1 330 nm
Side Mode Suppression Ratio SMSR CW, Pf = −2 dBm 30 dB
Threshold Current Ith CW, TC = 25°C 8 20 mA
CW 2 40
Differential Efficiency ηd CW, Pf = −2 dBm, TC = 25°C 0.02 0.025 0.04 W/A
CW, Pf = −2 dBm 0.005 0.05
Operation Voltage Vop CW, Pf = −2 dBm 2 V
Monitor Current Im Pf = −2 dBm, VR = 1.5 V *1 90 700 µA
Monitor Dark Current ID VR = 1.5 V, TC = 25°C 5 nA
VR = 1.5 V 50
Rise Time tr 20-80% *1 30 50 ps
Fall Time tf 20-80% *1 40 50 ps
Extinction Ratio Ex 10 GbE, 10 G FC *1 4 5 dB
Tracking Error*2 γ −1.0 1.0 dB
Input Impedance Zin 25 Ω
Connector Repeatability CR With master pigtail −1.0 1.0 dB *1 9.95/10.3/10.5 Gb/s, PRBS 231−1, NRZ, Duty Cycle = 50% *2 Tracking Error: γ
0 ImIm
TC = 25˚C
TC = –5 to +85˚C
Pf
(mW)
Pf
Pf @ 25˚C
(mA)
γ = 10 log [dB]Pf
Pf @ 25˚C
Data Sheet PL10525EJ03V0DS 11
DISCO
NTINUED
NX8341 Series
REFERENCE
Document Name Document No.
Opto-Electronics Devices Pamphlet PX10160E
Data Sheet PL10525EJ03V0DS 12
DISCO
NTINUED
NX8341 Series
The information in this document is current as of February, 2007. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information.No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document.NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others.Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information.While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features.NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application.
The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application.
(Note)
•
•
•
•
•
•
M8E 02. 11-1
(1)
(2)
"NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries."NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above).
Computers, office equipment, communications equipment, test and measurement equipment, audioand visual equipment, home electronic appliances, machine tools, personal electronic equipmentand industrial robots.Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disastersystems, anti-crime systems, safety equipment and medical equipment (not specifically designedfor life support).Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, lifesupport systems and medical equipment for life support, etc.
"Standard":
"Special":
"Specific":
Data Sheet PL10525EJ03V0DS 13
DISCO
NTINUED
NX8341 Series
SAFETY INFORMATION ON THIS PRODUCT
DANGERINVISIBLE LASER RADIATIONAVOID DIRECT EXPOSURE TO BEAM
OUTPUT POWER mW MAXWAVELENGTH nmCLASS lllb LASER PRODUCT
AVOID EXPOSURE-InvisibleLaser Radiation is emitted fromthis aperture
SEMICONDUCTOR LASER
Warning Laser Beam A laser beam is emitted from this diode during operation. The laser beam, visible or invisible, directly or indirectly, may cause injury to the eye or loss of eyesight. • Do not look directly into the laser beam. • Avoid exposure to the laser beam, any reflected or collimated beam.
Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
Caution Optical Fiber A glass-fiber is attached on the product. Handle with care. • When the fiber is broken or damaged, handle carefully to avoid injury from the damaged part or fragments.
DISCO
NTINUED
Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailedwith the requirements of European Union (EU) Directive 2002/95/EC RestrictioSubstances in electrical and electronic equipment (RoHS) and the requiremen2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. Ththat the device is Pb-free. The –AZ suffix is used to designate devices containiexempted from the requirement of RoHS directive (*). In all cases the devices All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledgo into its products as of the date of disclosure of this information.
Restricted Substance per RoHS
Concentration Limit per RoHS (values are not yet fixed)
Concein
-A Lead (Pb) < 1000 PPM Not Detect
Mercury < 1000 PPM N
Cadmium < 100 PPM N
Hexavalent Chromium < 1000 PPM N
PBB < 1000 PPM N
PBDE < 1000 PPM N
If you should have any additional questions regarding our devices and compliastandards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communicationcontent of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowprovided by third parties and makes no representation or warranty as to the accuracy of such information. Eintegrate information from third parties. CEL has taken and continues to take reasonable steps to provide reinformation but may not have conducted destructive testing or chemical analysis on incoming materials and suppliers consider certain information to be proprietary, and thus CAS numbers and other limited informationrelease. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL pacustomer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability. DIS
CONTI
NU
4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279
below are compliant n on Use of Hazardous ts of EU Directive
e suffix –A indicates ng Pb which are have Pb-free terminals.
ge of the materials that
ntration contained CEL devices
-AZ ed (*)
ot Detected
ot Detected
ot Detected
ot Detected
ot Detected
nce to environmental
s concerting the substance ledge and belief on information fforts are underway to better presentative and accurate chemicals. CEL and CEL may not be available for
rt(s) at issue sold by CEL to
ED