1. Semestermuh.karabuk.edu.tr/makine/doc/syllabus/mechanical... · 2018-07-27 · technical...

MECHANICAL ENGINEERING DEPARTMENT 100% ENGLISH LECTURE CONTENTS

CourseCode: HST181 Course

Title: Semester: 1

Lecture: 2 Practice: 0 Lab: 0 Credit: 2 ECTS: 2

CourseLevel:

BSc -Bachelor

ofScience

Language: English CourseType: Compulsory Mode of

Delivery:Work

Placement(s):

CourseCode: TRK181 Course

Title: Semester: 1


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

CourseCode: FOL181 Course

Title: Semester: 1


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

1. Semester

Atatürk's Principles and History of Revolutions I

Course Objectives: This course teaches the spirit and significance of Atatürk's Revolution which aimed atachieving contemporary civilization.

Course Content: Basic Concept Information, Ottoman Empire and Its Decline, Tanzimat andConstitutional Periods, Idea Movements in the Last Period of Ottoman State, TripoliWar, Balkan Wars, First World War, Mudros Armistice and Occupations, Birth ofNational Struggle and National Organizations, Amasya Circular, National Congresses,Announcement of National Assembly, Opening of the Grand National Assembly, War ofIndependence, Mudanya Armistice, Lausanne Peace Treaty.

Course Objectives: The aim of this course is to equip students with language knowledge and skills which areessential for general communication purposes and future academic studies, and alsohelp students develop positive attitudes towards the target foreign language.

Course Content: The course is designed to teach basic grammatical structures of English languages suchas to be, there is/are, have/has got, tenses, modals, passives, conditionals, nounclauses, reported speech, gerunds/infinitives.

Turkish Language I

Course Objectives: The aim of this course is to inform students about the content, characteristics, anddevelopment of Turkish language and to provide them with writing and reading skills inTurkish and to raise the awareness of using Turkish as the national language.

Course Content: This course is designed to teach the definiton of language and culture, language-culturerelation, the role of language as a social institution in societies, the situation of TurkishLanguage among world languages, the development and historical periods of Turkishlanguage, the current condition of Turkish Language and span of usage, TurkishPhonology, inflectional and derivational morphemes in Turkish, types of lexicon inTurkish, and elements of the sentence.

Foreign Language I

/ 47


CourseCode: CME183 Course

Title: Semester: 1


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

CourseCode: PHY183 Course

Title: Semester: 1


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

CourseCode: CHE183 Course

Title: Semester: 1


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

Information Technologies And Applications

Course Objectives: To be able to prepare students for information age, to inform about computer hardwareand software, to create awareness in word processors, presentations, spreadsheets,internet and e-mail issues and to use tools and applications related to this fieldeffectively.

General Chemistry

Course Objectives: This course teaches and examines the behavior of atoms and molecules and providingknowledge to students to forecast the behaviour of them in reactions.

Course Content: Knowledge of matter , structure of atom, sequence of electrons, periodic system,Chemical bonds and interactions, classification and atomicity, mole and equivalencyconcept, chemical laws, reactions, gases, solutions and concentration.

Course Content: Computer hardware, Software and operating system, Internet and internet browser, E-mail management, Newsgroups and forums, Web based learning, Word processing,Spreadsheet, Presentation maker, Personal web site development, E-commerce andmaking a identifier material.

General Physics I

Course Objectives: To teach the concepts of statics, dynamics and kinematics given in the course content,their applications in daily life and modern technology.

Course Content: Units, physical quantities and vectors, linear motion, motion in two and threedimensions, The Newton laws of motion, Applications of Newton's laws, Work andkinetic energy, Potential energy and conservation of energy, Linear momentum, Impulsand collisions, Rotation of a rigid body, Dynamics of rotational motion, Equilibrium andelasticity, Gravitation.

/ 47


CourseCode: CAL183 Course

Title: Semester: 1


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

CourseCode: MCE101 Course

Title: Semester: 1


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

Mathematics I

Course Content: Introducing the first year undergraduate students Mechanical Engineering concepts,definitions, symbols, and units.

Course Objectives: This course aims at giving students the concept of sets, types of numbers, properties ofone variable functions, meaning of limit, continuity and derivative over one variablefunctions. Explaning how the student use the derivative concept in engineeringapplications. Constructing the ability of solving maxima-minima problems. Giving theability of solving engineering problems by using mathematics knowledge.

Course Content: This course covers, numbers, absolute value, inequalities, induction, coordinates. theconcept of a function and function types, some kinds of special functions and theirdomains, limit and continuity of functions, properties of continuous functions. theconcept of the derivative, rate of change, the mean value theorem and applications,finding the maximum and minimum and their applications, hyperbolic functions andderivatives, implicit and inverse functions and derivatives, parametric equations andtheir derivatives, and curve sketching, polar coordinates.

Introduction to Mechanical Engineering

Course Objectives: An introduction to Mechanical Engineering profession.

/ 47



Title: Semester: 1


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

Computer Aided Technical Drawing I

Course Objectives: The aims of this course is to learn in students the basic principles and equipments abouttechnical drawing, to gain the capability to draw and read manuf acturing drawing of apart and to perf orm the technical drawing in CAD sof tware media.

Course Content: Definitions and terms of technical drawing, technical drawing equipments, preperation oftechnical drawing sheets, standard fonts and heights of fonts, line types, properties andusage places of line types, drawing rules, geometrical drawings, inside and outsidetangent drawings of lines with arcs, inside and outside tangent drawings of circles witheach other; helical, ellipse, evolvement, cycloid, parabola and hyperbola drawings;scales, scales of enlargement and reduction, methods and planes of projection, views;auxiliary, special, rotated and local views; perspective views; isometric, cavalier, cabinetand bird's-eye projections; the terms and rules of dimensioning, sections andapplications of sections, surface treatment symbols, surface quality, indication of surfaceconditions; definition of CAD system, operating CAD software, sample applications;learning line drawing on computer medium, arraying, conditional drawing, trimming;drawing circle and arc, adjusting view settings; drawing ellipse, polygon, polyline, spline,rectangular; moving, rearranging and scaling drawings; dimensioning, obtaining sectionview, hatching, texting, filleting, chamfering, extending, stretching, making block,replacing block, forming table and letterhead, calculating distance and area, view andzooming commands.

/ 47


CourseCode: HST182 Course

Title: Semester: 2


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

CourseCode: TRK182 Course

Title: Semester: 2


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 2


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

Turkish Language II

Course Objectives: This course aims at comprehending elements of sentences and their functions to formsentences; introducing and applying types of written and spoken expressions,differentiating and correcting the mistakes in language exercises; getting acquaintedwith the rules regarding the preperation of research articles; and developing students’writing and speaking skills via texts chosen from Turkish and World literature, andhistory of thought.

Course Content: This course is designed to teach the definition of sentence and elements of sentence;sentence analysis and examples of sentence analysis; types of sentences; compositionskills; planning of written composition; types of written and oral expression andexamples; means of expression and brainstorming in forming paragraphs; ambiguities insentences; and the rules employed in the conduction of reseach articles.

Foreign Language II

2. Semester

Atatürk's Principles and History of Revolutions II

Course Objectives: This course provides the Turkish youth with consciousness about Ataturk’s Principlesand Revolutions and educates them in accordance with Kemalism.

Course Content: Political Reforms, Legal Reforms, Educational and Cultural Reforms, EconomicReforms, Social Reforms, Atatürk’s Principles, Atatürk’s Foreign Policy, Turkey in theWorld War II, The concept of Jeopolitics and Jeopolitics of Turkey.

Course Objectives: The aim of this course is to improve the students' fluency and comprehension skills inthe target language, to teach the students to use the grammar points correctly, tounderstand the passage they read and to make sentences using tenses and the othergrammar items.

Course Content: This course is designed to teach adjectives and adverbs, relative clauses, adverbialclauses, pronouns, nouns, quantifiers, articles, causatives, tag questions, prepositions.

/ 47


CourseCode: CME182 Course

Title: Semester: 2


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

CourseCode: PHY186 Course

Title: Semester: 2


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 2


CourseLevel:

ASc -Associate

ofScience


Delivery:Work

Placement(s):

Course Content: Introduction to programming languages, algorithm design and flow chart, data types andvariables, operators(arithmetic, relational, logical), control structure (if, while, for), Userdefined function, arrays and strings, pointers, recursion, searching algorithms, sortingalgorithms, file operations.

General Physics II

Course Objectives: The application of the electrical and magnetic interaction to static and mobile chargesand the related fundamental laws and principles.

Course Content: Electric charge and electric fields, Gauss's law, Electric potential, Capacitance anddielectrics, Current, resistance and electromotive force, Direct-current circuits, Magneticfields and magnetic forces, Source of the magnetic field, Electromagnetic induction andFaraday's law, Inductance, Alternating current, Electromagnetic waves.

Computer Programming

Course Objectives: This course teaches the fundamental concepts of programming, algorithm for thesolution of a problem and writing programme for it.

Mathematics II

Course Objectives: To make students competent in mathematical field in their work life. To be able to usemathematical concept in practice, to use mathematics for developping solutions.

Course Content: Functions, trigomometry, linear equation systems and matrices, limit and continuity,derivation, integral, differential equations, statistics.

/ 47



Title: Semester: 2


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 2


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 2


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

Course Objectives: The aim of this course is to introduce the concepts of matrices, determinant, vectorspaces and inner products.

Course Content: Matrix Algebra, Elementary Row Operations on Matrices and Solution of LinearEquations, Special Types of Matrices, Elementary Matrices, Equivalent Matrices, nxnDeterminants, properties of Determinants, Vector Spaces, Subspaces, LinearIndependence, Basis and Dimension. Linear Transformation and matrix of a LinearTransformation, Eigenvalues and Eigenvectors, Diagonalization Inner Product Spaces.

Statics

Course Objectives: The purpose of this course is to introduce a clear understanding of the principles of rigidbody mechanics and the assumptions and idealizations and then to give students theknowledge about equilibrium and internal force concepts, related applications.

Lineer Algebra

Course Content: Statics of particles: forces in plane, forces in space, equilibrium. Moment of a force,moment of a couple. Equivalent systems of forces on rigid bodies. Equilibrium in twodimensions. Equilibrium in three dimensions. Distributed forces: centroids and center ofgravity. Analysis of structures: trusses, frames and machines. Internal forces in beamsand cables. Friction. Moments of inertia of areas, moments of inertia of masses. Methodof virtual work.

Measurement Techniques

Course Objectives: Purposes of this course is teach the measurement technique principles and give themeasurement ability to students.

Course Content: The measurement and control. The measurement techniques. Measurement of the size,angle and area. Classic measuring and control devices. Caliper, micrometer, markinggauge, comparator, indicator, gage. Surface roughness. Hardness measurementtechniques. Coordinate measuring. Measurement of vibration. Pressure, flow andtemperature measuring. Energy productivity. Uncertainty analysis. Design and reportingof the experiments.

/ 47



Title: Semester: 2


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

Computer Aided Technical Drawing II

Course Objectives: The aims of this course is to teach students the capability to create technical drawingand 3D designing the single or multi machinery systems 3D on PC media, to makeanimation of 3D assembly models.

Course Content: Intruduction to assembly drawing, the basic principles of design in assembly modelling.Drawing the manufacturing drawing of machine part and assembly: assembly letterhead,surface texture symbols, dimensioning and geometric tolerances, create to 2Dmanufacturing drawing from 3D model. Standard machine elements (Screw, nut, bolt,washer, coupling, wedge, pulley, pin, pin, ring, bracelet, spring, gear wheel, bearing,etc.). Section views on assembly modelling and applicaitons. 3D solid modeling methodswith a current 3D design software. User interface, tool bars, file save and copy, filedelete, opening of multiple file and windows. View control. Solid feature modeling:Primitive features. Secondary features. Feature modify, feature processes. Parametricmodelling. Create to work planes. Surface modeling, interactive surface modeling.Assembly, Assembly-Part processes. 3D Part and assembly modelling. Assemblyanimation, views, section views processes, dimensioning, surface texture symbols, sizeand geometric tolerances. Printing processes on technical drawing papers. Industrialdesign applications.

/ 47


CourseCode: EEE261 Course

Title: Semester: 3


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 3


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 3


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

3. Semester

Course Objectives: The main aims of this course are provide the student general knowledge about theusage of natural languace of mathematics as a toll for modeling, formulating and solvingof engineering problems.

Course Content: Classification of differential equations, obtaining of differential equations, first orderdifferential equations, higher order linear differantial equations, Laplace transform.

Dynamics

Course Objectives: The objectives of the lecture are to develop the capacity to predict the effects of forceand motion. In lectures, different applications of engineering systems are solved in orderthat students understand subjects and apply his knowledge rapidly.

Basic Electric and Electronic

Course Objectives: The objective of this course is to introduce the basic electrical definitions and electricalmeasurment instruments, basic electrical laws and circuit analysis, circuit componentsand to gain the practicing abilities of the circuits.

Course Content: Fundamentals of electricity, Electrical and electronic components, Measuringinstruments, Direct current circuits, Circuit analysis, Electronic circuit applications.

Differantial Equations

Course Content: Kinematics of particles; velocity and acceleration in rectangular, cylindrical, sphericaland normal and tangential coordinates, Rectilinear motion, Relative motion, Kinetics ofparticles; Newton's law of motion, Equation of motion, Work, Impulse, Momentum,Principle of work and energy, Principle of impulse and momentum, Angular momentum,Angular impulse and momentum principle, Kinetics of systems of particles, Planarkinematics of rigid bodies, Instantaneous center of rotation, Planar kinetics of rigidbodies, Three dimensional kinematics of rigid bodies, Three dimensional kinetics of rigidbodies.

/ 47



Title: Semester: 3


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 3


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

Manufacturing Processes I

Course Objectives: To develop in students the capability to understand, analyze, design, and/or select theprocesses of metal casting, joining, bulk deformation, sheet metal, and plasticcomponents for the production of metallic and polymer components. The focus will be onenabling students to understand the process technologies with particular emphasis on: –the identification of product defects; the safe design of forming tooling and the selectionof forming equipment; the optimum and efficient use of materials and energy and theselection of appropriate manufacturing processes with particular emphasis on safety,both personal and environmental.

Course Content: Metal Casting Processes: Sand casting, Sand moulds, Type of patterns, Patternmaterials, Pattern allowances, Types of Moulding sand, Properties, Core making,Methods of Sand testing, Moulding machines, Melting furnaces, investment casting,Ceramic mould, Lost Wax process, Pressure die casting, Centrifugal casting. JoiningProcesses: Fusion welding processes, Types of Gas welding, Arc welding equipments,Electrodes, Coating and specifications, Principles of Resistance welding, Spot/butt, TIGwelding, Weld defects, Brazing, Soldering process. Bulk Deformation Processes: Hotworking and cold working of metals, Forging processes, Typical forging operations,Rolling of metals, Types of Rolling mills, Flat strip rolling, Shape rolling operations,Defects in rolled parts, Principle of rod and wire drawing, Tube drawing, Principles ofExtrusion, Types of Extrusion, Hot and Cold extrusion. Sheet Metal Processes: Sheetmetal characteristics, Typical shearing operations, Bending, Drawing operations, Stretchforming operations, Formability of sheet metal, Hydro forming, Rubber pad forming,Metal spinning, Introduction to Explosive forming. Manufacturing of Plastic Components:Types of plastics, Characteristics of the forming and shaping processes, Moulding ofThermoplastics, Working principles and typical applications of Injection moulding,Plunger and screw machines, Compression moulding, Transfer moulding, Blowmoulding, Rotational moulding, Film blowing, Extrusion, Thermoforming, Bonding ofThermoplastics.

Strength of Materials I

Course Objectives: The purpose of this course are to;Introduce the basic principles of stress analysis andapplication of strenght theory by connecting the internal force and moment with thestresses on basic elements under simple loading conditions.

Course Content: Definition of mechanism, statics of rigid bodies, stability of rigid bodies, center of gravity,moment of inertia, mechanical properties of materials, elasticity and law of hookers, typeof stresses, calculation of the size of resultant tension.

/ 47



Title: Semester: 3


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

CourseCode: MME261 Course

Title: Semester: 3


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 3


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

Thermodynamics I

Course Content: Classification of materials, metals, semiconductors, plastics, ceramics, composites,metals and alloys, Crystal structure and defects, Types of chemical bonding, energylevels and band structures, Solid solutions, atomic diffusion, Phase transformations andphase diagrams, Ferro alloys, iron and steel production, Non-ferrous alloys, Polymers,Ceramics, Semiconductors, Composites, Mechanical properties of materials, Thermaland electrical properties of materials, Material characterization methods, the selection ofhigh quality materials.

Technical Foreign Language 1

Course Objectives: This course teaches engineering terminology in English and develops textcomprehension, writing, reading and listening skills.

Course Content: The Concept and basic definitions of science, technology, engineering, engineer. Historyof engineering, The methodology of engineering work, The concept and steps ofscientific method, The concept and steps of engineering design process, Problemsolving techniques in engineering, Seven steps to problem solving in engineering, Fieldsof engineering, Aerospace Engineering, Biological Engineering, Civil Engineering,Computer Engineering, Electrical Engineering, Engineering Science, FinancialEngineering, Industrial Engineering, Meterial Engineering, Mechanical Engineering,Military Engineering, Nuclear Engineering, Ocean Engineering, Petroleum Engineering,Reverse Engineering, Geo engineering,Textile Engineering, Safety Engineering.

Course Objectives: 1. To teach basic principles of clasical thermodynamics. 2. To give basic concepts ofthermal system design based on first law. 3. To introduce basic principles of energyconversion.

Course Content: Basic concepts and definitions, System, boundary, Surrounding, Property, Equilibrium,State and process, Cycle, Properties of a pure substance, Equations of state, The statefor ideal gas, Specific heat, Energy (by heat and work) interactions between system andsurrounding, Closed and open systems, First law of thermodynamics, Internal energyand enthalpy, Second law of thermodynamics, reversibility and irreversibility, Carnotcycle.

Materials Science

Course Objectives: 1. Teach the general purpose of the Materials Science. 2. Teach atomic structure ofmaterials. 3. Explain the general physical properties of materials. 4. Establish therelationship between the product's features with the atomic structure of materials. 5.Classify advanced technological materials, to teach their usage fields. 6. Demonstratethe required important points for their usage areas and manufacturing, quality and thestructure of the functional materials in engineering field is aimed.

/ 47



Title: Semester: 4


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

CourseCode: INE260 Course

Title: Semester: 4


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 4


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

Engineering Statistics

Course Objectives: To promote the importance of the statistics in engineering applications. The collectionand summarizing of statistical data and to teach the techniques of used in inferences.

Course Content: Data analysis methods, the teories and techniques of numerical data examining,economic indices, interpretation of the economic parameters, information of thepossibility distributions and use of this informations in economics and business.

Strength of Materials II

4. Semester

Numerical Analysis

Course Objectives: The purpose of numerical analysis is to find acceptable approximate solutions whenexact solutions are either impossible or so arduous and time-consuming as to beimpractical, and to devise alternate methods of solution better suited to the capabilitiesof computers.

Course Content: This course includes; elements of error analysis, real roots of an equation, polynomialapproximation by finite difference and least square methods, interpolation, quadrature,numerical solution of ordinary differential equations, and numerical solutions of systemsof linear equations, programming a computer in addition to using a graphing calculator.

Course Objectives: The purpose of this course is Introduce the transverse shear, combined loads and teachthe stress and strain transformation, express to design and deflection of beams andshafts, bucling of column

Course Content: Stress Transformations, Mohr Circle, Principal Stresses and Principal Stress Planes,Criteria of Strain and Failure, Moments of Areas,Moment and Moment of Inertia,Torsion, Simple Bending, Transverse Loading, Beam Cutting Normal force and bendingmoment, Shear force and bending moment diagrams, Stresses in beams,Displacements in beams and elastic curve, Integral method, Superposition method,Moment field method, Hyperstatic problems.

/ 47



Title: Semester: 4


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 4


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

Course Content: Position analysis of mechanisms, Instant centers of rotation, Velocity analysis ofmechanisms,Acceleration analysis of mechanisms, Gear Mechanisms, CamMechanisms.

Manufacturing Processes II

Course Objectives: To develop in students the capability to understand cutting theory and analyze, design,and/or select the processes of material removing processes of turning, shaping, milling,drilling, grinding, discharging. To understand CNC machining and programming aspectfor the production of components. The focus will be on enabling students to understandthe process technologies with particular emphasis on: – the identification of productdefects; the safe design of forming tooling and the selection of forming equipment; theoptimum and efficient use of materials and energy and the selection of appropriatemanufacturing processes with particular emphasis on safety, both personal andenvironmental.

Course Content: Introduction to material removal processes. Types of machine tools. Theory of metalcutting. Chip formation, Orthogonal cutting. Cutting tool materials. Tool wear, Tool life.Surface finish. Cutting fluids. Universal lathe. Cutting tool geometry. Various operations:Taper turning, Thread cutting, Special attachments. Machining time and powerestimation. Turret lathes, Automats, Automatic screw type, Turret Indexing mechanism,Bar feed mechanism. Reciprocating machine tools: shaper, planer and slotter. Milling:types, milling cutters, operations. Hole making: Drilling, reaming, boring, tapping. Sawingmachine: Hack saw, band saw, circular saw. Broaching machines: Broach construction,Push, pull, surface and continuous broaching machines. Abrasive processes, Grindingwheel, Specifications and selection, Types of grinding process. Cylindrical grinding.Surface grinding. Centreless grinding. Honing, lapping, super finishing, polishing andbuffing. Abrasive jet machining. Electro Discharge Machining. Theory of discharging.Parameters. Wire Electro Discharge Machining. CNC machine tools and types,constructional details. Design considerations of CNC machines for improving machiningaccuracy. Structural members, Slide ways, Linear bearings, Ball screws, Spindle drivesand feed drives. Part programming fundamentals, Manual programming, Computerassisted part programming. Safety measures about the processes.

Mechanisms

Course Objectives: Teaching preliminary concepts of mechanisms, methods of analysis for the transmissionof motion in mechanisms, kinematics of cam and gear mechanisms.

/ 47



Title: Semester: 4


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 4


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 4


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

Course Objectives: To learn the fundamentals of engineering materials.

Course Content: Structures, properties and processing of metal alloys. Surface properties, corrosion andmetal coatings. Nonmetallic materials; polymers, ceramics. Composite materials.Selection of engineering materials.

Technical Foreign Language II

Course Objectives: In global world ,it is too important following developed technology and new acedemicstudies.By this lecture, the students can learn technical English and this enables to beterunderstand of acedemic issue or new design techonology. Furthermore , their translationand communication skills can improve by this way.

Thermodynamics II

Course Objectives: 1- To teach basic terms related second law such as energy quality, entropy and exergy.2- To give second law analysis. 3- To introduce application of thermodynamic laws topower and refrigeration cycles. basic principles of energy conversion.

Course Content: Clausius inequality and definition of entropy, Principle of the increase of entropy,Entropy balance for closed and open systems. Adiabatic efficiencies. Entropy change ofpure substances, liquids and solids, ideal gases. Exergy, second law analizi. Gas powercycle (Otto, Diesel, Stirling, Ericsson, Brayton), Vapor power cycle (Rankine),Cogeneration, binary vapor cycle, combined gas-vapor power cycle. Refrigeration cycles(vapor –compression, gas, absorption, and thermoelectric), heat pumps.

Engineering Materials

Course Content: Basic technical terms of industrial engineering, Systems engineering, Operationsresearch, Computer engineering, Hardware and network software engineering,Metallurgical engineering, Iron and steel casting, Ceramic engineering, Mechanicalengineering, Mechatronics and mechanic, Electrical engineering, Automotiveengineering.

/ 47



Title: Semester: 5


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 5


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 5


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

Course Content: Students are required to make a summer internship for at least four weeks (twenty-fourworking days and Working 4 hours per day to 24 Business days) in a suitable workshopplant. Students can make engineering measurements, machining, foundry work, metalforming, welding, non-traditional machining, heat treatment, excellence and so on.applications, such as manufacturing processes. Report on the work done by the studentshould be prepared.

Hydraulics and Pneumatics

Course Objectives: To introduce principles of hydraulic and pneumatic systems, to illustrate hydraulic andpneumatic system design, to gain analysis abilities of hydraulic and pneumatic system inautomotive engineering.

Course Content: Introduction to hydraulics and pneumatics; Principles of power hydraulics andpneumatics, Hydraulic and pneumatic elements, Hydraulic and pneumatic piping andsealing, Hydraulic circuits and symbolic presentation, Circuits design, Design of vehiclehydraulic and pneumatic systems.

5. Semester

Industrial Practice I

Course Objectives: Students recognize factories and learn factory production processes, so they gainpractical information.

Fluid Mechanics I

Course Objectives: This course introduces the student to knowledge of the the basic concepts of fluidmechanics and the basic equations of hydrostatic.

Course Content: Basic concepts and definitions, Fluid statics, Manometers and pressure measurements,Hydrostatic forces on immersed bodies, Forces on immersed and floating bodies, Fluidas Rijid body translation and rotation.

/ 47



Title: Semester: 5


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 5


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 5


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

Course Objectives: This course is designed to teach students fundamentals of conduction, convection andradiation heat transfer. Students are informed about the analysys and solution of basicheat transfer problems with analitical solution techniques, practical tables and chartsgiven.

Course Content: General laws of heat transfer, steady one-dimensional heat conduction, differentialequation of heat conduction, unsteady heat conduction, an overview of the convectionheat transfer.

Dynamics of Machinery

Course Objectives: Teaching basic concepts of mechanisms, methods of analysis for the motion and forcetransmission in mechanisms, fundamentals of vibrations and principles of balancing ofmachinery.

Heat Transfer

Course Content: Kinematic analysis of simple mechanisms, Force analysis of linked mechanisms, Forceanalysis of gear mechanisms, Force analysis of cam mechanisms, Mechanical vibration,Balancing, Balancing of rotating and reciprotating masses, Balancing line engine.

Machine Elements I

Course Objectives: 1. To introduce the analysis phase and machine elements in mechanical design. 2. Todevelop mathematical models for functional analysis and stress calculation of machineelements by using engineering sciences. By using the available experimental modelsdetermine the input and output values of the machine system elements. 3. To use thestandards and design criteria. 4. To improve the goal recognition, creativity and intuitionand also to enable the students to gain experience in machine design. 5. To provide thenecessary knowledge and capability for task spesification, consept formation andsynthesis phases of the machine design. To develop the further stages of the machinedesign; manufacturing of prototypes, testing and marketing."

Course Content: Mechanical engineering design activity and importance of machine elements knowledgein this activity. Fundamentals of design and applications of machine elements. Welded,soldered, adhesive bonded, riveted joints. Shaft-hub connections. Bolted joints andpower screw mechanisms. Pins, knuckles, springs, shafts and axles, coupling andclutches, lubricants and lubrication theory, sliding and rolling bearings, Fundamentals ofspeed reduction mechanisms, kinematics and geometry of gearsbelt drive and chainmechanisms.

/ 47



Title: Semester: 5


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

5th SEMESTER ELECTIVE COURSES


Title: Semester: 5


CourseLevel:

BSc -Bachelor

ofScience

Language: English CourseType: Elective Mode of

Delivery:Work

Placement(s):


Title: Semester: 5


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

Speaking and Reading Tech. at Foreign Language

Course Objectives: This course is aimed to improve speaking skill of english in both acedemic and socialenvironment, to have effective communication skill, to provide proficiency in usingEnglish.

Course Content: The weighted subject is speaking skill. The contents of lecture are ; source searching inweb, academic presentation about occupational subject, group and team studies, acting,speaking , communication etc.

Alternative Energy Sources

Course Content: What is plumbing? The importance of systems, City water, the shapes, the applicationstates, Indoor and outdoor installation, Indoor plumbing and partitions, Pressurizationsystems, air pressure tanks, Water tanks, Water softening systems, Clean water supply,Wet places in the building structure and organization of information, Plumbing materialsand end materials, Waste water installations inside buildings, partitions, Rain water andfire fighting equipment, Clean and dirty water pipe diameter of the accounts, Clean anddirty water pipe diameter of the accounts.

Course Objectives: To introduce all energy sources except fossil fuels, teaching the existing potential ofthese resources in the world and to teach the methods to obtain these resources.Examining environmental and economic dimensions of alternative energy sources.

Course Content: Energy sources, Fossil and inexhaustible natural energy resources, Major applicationsof solar energy, Biogas production and use, Natural gas, Geothermal energy, Windenergy, Tidal energy, Wave energy, Biomass fuels, Biodiesel fuels.

Plumbing Systems and Design

Course Objectives: To present plumbing systems and to teach its necessary design and sizing.

/ 47



Title: Semester: 5


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 5


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 5


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

Modern Engineering Measure Techniques

Course Objectives: The aim of this course: To introduce the principles of measurement technologies andincreasing the experimental abilities of engineering students.The attenders take theability of planning and designing a measurement system.

Course Content: Analyses of experimental results. Undetermination analysis. Pressuremeasurement.Flow measurement.TEmperature measurement.Thermal conductivitymeasurement.Energy efficiency measurement tools.Designs of experiments andpresentation.

Course Objectives: 1. Be able to benefit from material in the longer time 2. To produce material that havenew and superior surface features. 3. Learning behaviors of materials working in contactwith each other.

Course Content: Surface definition, metal surface properties, process applied to surface and theirimportant, processes applied to metal surface before surface processing, processchanged to surface properties, Surface modification process, General view to surfacecoating process and their descriptions, processes making in the gas phase.

Advanced Manufacturing Planning

Course Objectives: Understanding and analysis of manufacturing production lines, esnel manufacturingcells, group technology and part of the lecture

Course Content: Basic concepts; production phases of the product, manufacturing systems, automation,with the help of computer design (CAD), with the help of computer manufacturing(CAM), computer integrated manufacturing (CIM). Manufacturing systems,manufacturing and process planning, production capacity for calculating techniques.

Surface Treatment

/ 47



Title: Semester: 5


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 5


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

Heating Technology

Course Objectives: To teach applications of heating system and tools used in the heating systems.

Course Content: Importance of heating and heaters, heating systems, local and central heating systems,efficient of boiler, boiler montage rules, piping, chimneys, dilating tanks, hot waterheating systems, function of pumps, maintenance of pumps, floor heating systems, hightemperature water heating systems.

Machine Tools

Course Objectives: This course introduces the student to the design of machine tools, cutting theory and itscomponents. It gives knowledge about machine tool construction and machine toolmaterials. It concentrates on the design of machine tool elements and selection ofstandard mechanical components. Design of bearing mechanisms, slip-stickphenomenon in addition to cutter and work holding mechanisms are also introduced.Safety in machine tools is also handled.

Course Content: Introduction to the machine shop and anatomy of machine tools, Basic machines, cuttingtheory, feeds, speeds, Types of machine tools, Sawing Machines, Lathes, MillingMachines, Drilling Machines, Grinding Machines and CNC Machine Tools and their axis,Machine tool construction, Materials used in machine tools, Machine tool elements,Motors, Beds, Slide ways, Shafts, Machine tool elements, Gears, Keys, V-Belts,Bearings, Cams, Selection of standard mechanical components in machine toolconstruction, Ball screws, ball return systems, reversibility, anti-reversing option, Slip-stick phenomenon, Lubrication, Power requirement in a machine tool, Cutter holders andholding methods, Work holding principles and equipments, Jigs and fixtures, Safety inmachine tools.

/ 47


CourseCode: SOC301 Course

Title: Semester: 5


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

CourseCode: ESC301 Course

Title: Semester: 5


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 5


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

Values Education

Course Objectives: Value education and the basic concepts of the framework and requirements andimportance of value education in educational institutions, examination of the world andTurkey values education studies.

Course Content: Concepts of value and basic concepts of values education. Sociological, psychologicaland philosophical values. Value types and properties of values.

Labor Law

Course Content: Introduction to intellectual property rights, Product design and development, Industrialdesign, General provisions, Patent application for the industrial design and itsexamination, Industrial design patent, Rights derived from industrial patents, Industrialdesign use, Protection of the rights of designer and patent owners, Internationalagreements, Examination of sample patents, Preparation of a sample patent.

Course Objectives: To teach the basic concepts of labor law and employee-employer rights, basic propertiesof syndicates.

Course Content: Individual Labour law, Concept of Labour Law, Sections of labour law, Sources of labourlaw, Basics of labour law, Employee, Employer relationships, Workplace, Plant, Laborcontracts and kinds, Labour contracts making

Patent and Industrial Design

Course Objectives: This course explores intellectual property rights, patent application for the industrialdesign and its examination, rights derived from industrial patents, protection of the rightsof designer and patent owners, and international agreements. This course is to trainstudent’s capacity in the thinking, method, and skill in industrial design. It is expectedthat the students will be able to understand and grasp the logic of design process forindustrial artefacts.

/ 47



Title: Semester: 5


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 5


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 5


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

Entrepreneurship

Course Objectives: The course introduces the students to the preceding and early phases of an enterprise.It provides the students with basic ideas about entrepreneurial orientation, opportunityrecognition.

Course Content: Core Managerial Concepts and Entrepreneurship, Finding a new idea, From businessmodel to business plan, Marketing plan in Business Plan, Production Planning,Management Plan, Financial Plan, Business Planning workshops, Legal and regulatoryissues, Current Issues in Entrepreneurship, Communicating with Business People,Communicating Business Plans, Investor Presentations.

Course Objectives: The aim of this lecture is to educate students how to communicate in the conditions ofglobalizing world.

Course Content: Definiton of international communication, Purpose and Progress of Internationalcommunication, a short history of international communication. Relationship betweeninternational communication to basic definitions such as economy, culture, politics. Therelevance of the communication process with the process of globalization, international,technology, raw material, organization, and the transfer of the law.

Communication Skills

Course Objectives: To teach base business concepts of behavioral sciences and relationships betweenindividual, environment individuality, culture, attitude.

Course Content: Historical development of behavioral sciences, Scientific methods of social psychology,Research techniques of social psychology, Individual and its environment, Individuality-character relationship.

International Communication

/ 47



Title: Semester: 5


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

Crucial Analytical Thought Tech.

Course Objectives: The aim of this lecture is to educate student to think in a critical way.

Course Content: Definitions, Brain as the thinking organ, Grouping thinking, Optional thinking andproperties, Critical and Analytical thinking.

/ 47


CourseCode: INE360 Course

Title: Semester: 6


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 6


CourseLevel:

BSc -Bachelor

ofScience

Language: CourseType: Compulsory Mode of

Delivery:Work

Placement(s):


Title: Semester: 6


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

Course Content: Determination and formulation of the engineering problem, Analyzing the problem,Investigating alternative solutions for the problem, Determination of the alternatives tobe chosen, Economically decision making for the chosen alternative.

System Dynamics and Controls

Course Objectives: The purpose of the lecture is, teaching the basic concepts of System Dynamics andClassiacal systems.

Course Content: Modeling of physical systems, Energy gates, One and two-port elements, Mechanical,electrical, fluid and thermal system elements, Linear graph, Determining Dynamicequations, Modeling of impure elements, Linearization, State variables, DeterminingSystem of equations in the form of A-matrix, Physical, canonical and phase variables,Functions and block diagrams of system answers, Transfer time, Basic concepts ofautomatic control, Control operations, Time response, Stability and Routh-Hurwitzcriterion, Location of the root curves, Methods of frequency response and Bodediagrams.

6. Semester

Engineering Economy

Course Objectives: Aim of this course is systematic study of net project investments as a result ofinvestments and expenditures in works and enterprises in relation to engineering.

Mechanical Engineering Laboratory

Course Objectives: To provide students make experiments for system parameters by desgining theexperiment setup, installing and calibrating.

Course Content: Enabling students to make experiments on “thermodynamics” and “energy” areas ofmechanical engineering. Given the basic mechanical engineering subjects, studentgroups will design of the experiment setup, installation and calibration and makeexperiments for specified system parameters. Detailed reports will be prepared andpresented for each experimental study.

/ 47



Title: Semester: 6


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 6


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 6


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

Course Objectives: This course introduces the student to knowledge of the the basic concepts of fluidmechanics conservation laws and the basic equations of hydrodynamics.

Course Content: Introduction to differential analysis of fluid motion.Continuity, momentum and energyequations. Incompressible viscous flow. Dimensional analysis and similarity.Incompressible viscous flow, Navier-Stokes equations. Laminar and turbulent boundarylayer flow. Flow around immersed bodies. Introduction to compressible flow.

Machine Elements II

Course Objectives: To teach the sizing, strength calculations and design of machine elements encounteredin engineering applications.

Fluid Mechanics II

Course Content: Spur Gears, Helical Gears, Cone Gears, Shaft, Spiles, Cotter Pin, Coupling, Break andFlywheel, Belt and Chain Connections.

Foreing Language For Business

Course Objectives: The aim of this course is to teach Business English to students.

Course Content: Job application to various institutions and companies, project application, writing articlesto establish commercial relations, job interviews with companies, talking on the phone,Working in English-dominated work environment, preparation of documents such as theapplication, request, response , report forms etc.

/ 47




Title: Semester: 6


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 6


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 6


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

Solar Energy and Applications

Course Objectives: To give necessary knowledge to the students on solar energy and its applications. Theaim of the course is to help the development of national industry and engineering skillsof students.

Course Content: Solar radiation, calculation of solar radiation on horizantal surfaces, Transmission ofsolar radiation through glass and plastics, Performance and theory of flat plate solarcollectors, Concentration collectors, Energy storage, Electric power generation usingEnergy, Various applications of solar energy, Heat losses from solar collectors,Conversion of solar energy into electrical energy, Solar cells.

Natural Gas Installation

Course Content: Turkey's overall energy situation, Turkey, the structure of industry and textile sector;energy efficiency and management concepts, energy management systems goldenrules, and energy management system creation, fuels and combustion, steam systems,steam boilers and energy efficiency, mass and energy balances; Waste heat utilization;trijenerasyon Cogeneration and electricity systems, energy efficiency, thermal insulationand economic analysis methods.

Course Objectives: To train students with sufficient background on the subject of natural gas installation, Togive engineering education about determining natural gas problems, To give informationthat can check security measures.

Course Content: General Features of natural gas, Building Exterior Natural Gas Installation, InteriorBuilding Natural Gas Installation, Gas Consumption Working with Devices, E. NaturalGas Safety Rules, Natural Gas Installation Basic Concepts, Natural Gas Equipment andClassification, Placement Rules, Natural Gas Installation Account and Projection,Combustion Air Supply Disposal of gas and burnt, Tube Circuit Control andCommissioning, Project implementation (starting with 3 weeks until the end of the periodcontinued application.

Energy Management

Course Objectives: The aim of this course is to introduce, industry-oriented energy efficiency andmanagement, the human and technical aspects to students.When this course isintroduced successfully: (i), energy efficiency concepts and differences between themcan be learnt, (ii) To taech establishing energy management system the basic principles(iii) learning energy equivalent and the importance and (iv)to be able to learn to work asa group at an engineering project.

/ 47



Title: Semester: 6


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 6


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 6


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

Modern Manufacturing Methods

Course Objectives: To introduce principles of modern manufacturing methods. Selection of the mostappropriate method for manufacturing the technical information that may be able tointroduce students.

Course Content: Introduction to advanced production methods, with the electron beam processing, ionbeam treatment, chemical processing, with Electro-erosion machining, ultrasonicmachining, laser beam and processing, water jet machining, Plasma arc manufacturing,Rapid Prototyping and private methods.

Course Objectives: Aim of this course; 1-To introduce CNC machine tools, building components and teachthe working principles. 2-CNC lathes and milling machines manual programming skills.

Course Content: CNC machining and their advantages, CNC vertical milling machines and CNC lathes.Programming on CNC milling machines. Technological and geometrical information forprogramming.Operating and programming on cnc turning machines. Selecting propercutting tools and İdeal machining parameters and conditions for cutting tools. Generalsafety rules and principles of clamping and fixing workpieces on the machine table.Absolute and incremental dimensioning, M and G codes, linear and circularinterpolation, counturing, milling and turning cycle programming. Control panels andtheir functions, tool magazines. Practice of programming methods on the CNCmachines. Practical work and practicing and using these programming methods on themachines. Peck drilling, thread cutting. etc operations and other machining cycles.

Systematic Design

Course Objectives: This course explores a systematic approach to solve any system design problem. Thiscourse is to train student’s capacity in designing systems in terms of phases of systemsuch as preliminary system study, detailed system study, system analysis, design,coding, testing, implementation and maintenance are explained. Computer basedsystems are defined. System development life cycle and the different phases of thedevelopment of system are explained in detail.

Course Content: Introduction to system analyses and design, Defining a system, System life cycle,Phases of system development life cycle, Preliminary system study, Feasibility study,Detailed system study, System analysis, System design, System testing,Implementation, Maintenance, Case studies in system design.

Computer Aided(CNC) Machine Programming

/ 47



Title: Semester: 6


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 6


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 6


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

Refrigeration Technology

Course Objectives: Teaching third year undergraduate students about different Refrigeration Systems andRefrigeration System Components.

Research and Presentation Technics

Course Objectives: The aim of this course is to teach scientific research and analysizing techniques and toteach the use of obtaining data and presentation of obtaining data.

Course Content: Scientific research and analysis techniques, Data collecting and data analyisis accordingto scientific research techniques, Reporting the results of researchs according to reportwriting techniques, Presentation of research subjects, The use of presentationequipments and technologies.

Course Content: Residential and commerical Refrigeration systems.

Computer Aided Design I

Course Objectives: Learn to computer-aided solid model design (lines, arcs, circles, rectangles, surfaces,etc..) and create solid models. Free-surface model development. Industrial andengineering products modeling. Learn to assembly of solid models and constructiontechniques to create images.

Course Content: 3D solid modeling design software with a current 3D methods. The Software UserInterface, Toolbars, File Storage and Backup Creating, Deleting Files, Multiple Files andWindow Opening Session, apparently Control, Appearance Mode, Mouse Gestures forObject Orientation Process, Solid Modeling Elements, Home Elements, SecondaryElements, Correction factors, Element Operations, Surface Modeling, InteractiveSurface Design, Assembly, Assembly-Track Operations, Drawing (Technical Drawing),measurement classification, Surface Roughness, Size and Geometric Tolerance signs,Drawing File Creation. Industrial Applications.

/ 47



Title: Semester: 6


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 6


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 6


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

Human Resources Management

Course Content: Definition of management. Historical development of management concept. Definition,and types of organization, Organization charts, Managemant of information, learning,culture, structure, continuity, power and politics in organizations. Management etics,Gender and management, Management functions (planning, organising, carrying out,coordination, auditing), New management techniques, Management with objectives,Management according to exceptions, Quality control chambers, Benchmarking,Management of change, Strategic management, Relationships between organizations.

Occupational Health and Safety

Course Objectives: The aim of this course is to introduce importance of work safety and healthy and toemphasize work safety and healty in terms of employee and employer.

Course Content: Basic concepts of occupational safety and health, Basic working areas of ergonomics,Reasons of work accidents, Avoidance models, Calculation of costs, Investigation andreporting, Occupational illness, its types and avoidance methods, Occupational safetymethods at workshop and laboratuaries, Personel and machine protective equipments,Fire and explosion prevention methods, Principals and objectives of first aid, ISGlegislation.

Course Objectives: It is aimed that students have recognition of principles like conditionality, being scientificand being historical while evaluating cases and problems. It is aimed that students haveability to function on a project as a team member or leader. Improving the ability of oraland written communication. It is aimed that students have recognition of universalvalues like reconciliation, change and sharing. It is aimed that students have ability toanalyze, explain and solve the problems.

Course Content: Personnel management, definitions and scope, Relationship with other sciences,Personnel problems and solutions, Personnel control, Human resources (internalresourcing and outsourcing), Work load analysis, Workforce analysis, Personnelevaluation methods, Personnel education and development, Work evaluationtechniques, Wage systems, Motivation, Leardership, Complaint mechanism,Communication, Discipline, Health and protection.

Management Systems

Course Objectives: To teach scientific knowledge and abilities for managing production and servicesystems.

/ 47



Title: Semester: 6


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 6


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

Course Objectives: To teach the principles and practices of standardization in national and internationalareas.

Course Content: Principles of standardization, standardization in Turkey, International Trade Relations forStandardization, Application of Standards which is compulsory in Turkey.

Institutive Behavior

Course Objectives: The aim of this course is to introduce technical and humanistic aspects of industrial R&Dand R&D management and to explain importance of technology, impacts of technologyand permanent development of technology.

Course Content: Configuration of technology and industry, Adventages of technology and competition,Technologic options, strategies and analitic tools, Partnerships and strategicagreements, Technology and structure, Technology and process, Technology andculture, Technology and total quality, Technology transfers, R&D management. R&Dproductivity, National politics and and R&D, Technoparks and innovationalorganizastions, University-industry R&D association, Patents and legal regulations, R&Dtrends.

Standardizasyon

/ 47



Title: Semester: 7


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 7


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

CourseCode: ATE461 Course

Title: Semester: 7


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

7. Semester

Machine Project I

Course Content: Students are required to make a summer internship for at least four weeks (twenty-fourworking days and working 4 hours per day to 24 Business days) in a suitable workshopplant. Students can make engineering measurements, machining, foundry work, metalforming, welding, non-traditional machining, heat treatment, excellence and so on.applications, such as manufacturing processes. Report on the work done by the studentshould be prepared.

Engines

Course Objectives: The aims of the course is to provide essential knowledge on structure, operating andcycle of Internal Combustion Engines.

Course Content: Thermodynamic cycles of internal combustion engines, Engine performanceparameters, fuel and combustion in engines, mixture formation (carburation andinjection), engine testing, engine performance characteristics.

Course Objectives: The aim of this course is to make the project students who wish to specialize in onearea, individually or in groups, from the perspective of a scientific theoretical and / orpractical and to teach project preparation, presentation, prepare for working life.

Course Content: Project topic selection, Team work, A machine, a system or a process design, Projectpreparation, implementation, completion of all the stages.

Industrial Practice II

Course Objectives: Students recognize factories and learn factory production processes, so they gainpractical information.

/ 47



Title: Semester: 7


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):



Title: Semester: 7


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 7


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 7


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

Course Objectives: To learn about the basics of heat insulation.and insulation to reduce heat loss, thermalinsulation applications in structures.

Course Content: Importance necessity and related standards of the Isolation, The varieties insulatingmaterial of the insulating material, Specifications, User locations and other informationapplications (cold and hot insulation), and insulation to reduce heat loss, Thermalinsulation applications in structures, Insulation and insulation-free status of thecomparison.

Nuclear Power Engineering

Course Objectives: Teaching fourth year undergraduates about Nuclear Energy, Nuclear Power Plants, andOperation Safety.

Factory Organization

Course Objectives: Managing the business processes and facility environment systematicly with the givenknowledge of business administration and production management concepts is aimed.

Course Content: Corporate Change, Learning and Communication, R&D and Inovation, SystemsApproach, Business Administration and Management, Basic Functions of Management,Decision Making Process in Management, Organization Structures, Quality RelatedTerms, Total Quality Management Principles, Production Quality and Productivity,Production Systems, Facility Layout Planning, Facility Layout and Process FlowSamples.

Thermal Insulation

Course Content: Energy in general, Nuclear Energy, Nuclear Reactions, Nuclear Plants.

Power Generation Systems

Course Objectives: Aim of this course is learning basics and practices of the energy machines which areusing industry.

Course Content: Primary energy sources, Thermodynamic basics, Heat exchangers, Boiler and steamgenerators, Gas turbines, Steam power plant, Combined cycle power plant,cogeneration, Combined heat and power.

/ 47



Title: Semester: 7


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 7


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 7


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

Heat Economy

Course Objectives: Savings when using heat, introduction abaut storage properties and storage methods forwaste heat.

Course Content: Need of heat economy , Importance of ideal insulation thickness, The total heat transfercoefficient, Thermal insulation on pipes, Graphic analysis of the insulation thicknessdetection, Isolation materials, Cost and depreciation analysis, Pipe flow, thetemperatures decreases, In the steam circuit yield reduction, Interval superheating ofsteam , Economizer, Heating boiler feed water.

Heat Pumps

Course Content: Historical development of gas turbines, classification, classification of streamprocessing, Theoretical cycles, theoretical stirling cycle, Theoretical Brayton cycle,regeneration, Gas turbines with intercooler and interheater, Closed system gas turbines,Actual cycles, Stagnation values, Compressor and turbine efficiency, Pressure losses,Regenerator efficiency , Mechanical losses, The air/fuel ratio and combustion efficiency ,Performance, work and air ratios, Aviation gas turbines, performance criteria,efficiencies, Compressors, centrif uges compressors, axial compressors, The speeddiagrams of the compressor stages, Characteristic of stage, Combustion chambers,Ensure of fuel, Type of combustion chamber, Combustion characteristics, Gas turbinefuels, Emissions, Turbines, turbine stage, velocity diagrams, impulse and reaction, finsparameters, Recent developments, Fuel economy, Weight and dimensions,Transmission needs materials, Comparison.

Course Objectives: The aim of this course is to teach heat pump applications and provide basic informationabout the suitable size for heat pumps.

Course Content: General information about vapor compression, Absorbtion, thermolelectric and othertypes of heat pumps, Heat pump systems, Their design and analyses, Applications inbuildings, Hot water supply, Heating, Cooling and moisture removal operations,Industrial applications of heat pumps.

Gas Turbines

Course Objectives: Is to ensure the understanding of students these the historical development of gasturbines, operation principles combustion in engines and energy conv ersion, exhaustemissions, aviation applications and latest technological developments and to reinforcethe knowledges about these issues.

/ 47



Title: Semester: 7


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 7


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 7


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

Computer Applications in Construction

Course Objectives: The aim of this course is to teach computer-aided machinery construction design andstrength analysis techniques and technologies.

Course Content: Design theory– statics and strength of materials. Strength analysis of mechanicalconstructions in PC media. The design steps of mechanical construction. Systematicanalysis of mechanical construction. Construction Methods and Materials, ConstructionGraphics, Estimating Methods. Preparing of construction plans. The assignments ofemployees' on construction design and scheduling. The basic principles of mechanicalconstruction for safety.

Course Objectives: To give the sufficient teoretical knowledges to understand mechanism designtechniques and to present the mechanism design problems in application.

Course Content: Introduction to kinematic synthesis, Basic bar mechanism design, Grashof Theorem,The optimum connecting angle, Arm-pendulum and Slider-Crank mechanism, Two,three and four position synthesis, Graphical and analytical methods, Modeling withcomplex numbers, applications of Freudenstein equation, Correlation of arm angle,Current practices.

Ergonomic Product Design

Course Objectives: Aim of this course to teach effect of the human factors on the mechanical design.

Course Content: Human Factors And Systems, Human Factors Research Methodologies, Human OutputAnd Control, Workplace Design, Environmental Conditions, Human Errors, AccidentsAnd Safety, Human Factors And The Automobile, Human Factors İn Systems Design.

Kinematic Synthesis

/ 47



Title: Semester: 7


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 7


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 7


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

Design of Control System

Course Objectives: To teach the materials using to represent the dynamic systems, to supply that optainingof answers in time plane of first and second order systems.

Electric and Hybrid Vehicles

Course Objectives: The aims of this course are to; teach the advantages of electric vehicles to othervehicles and introduce the systems which compose electric vehicle.

Course Content: Electric vehicles, Environmental effects of electric vehicles, Electric vehicle types,Energy storage systems, Battery and battery modeling, Fly wheel and supercapacitor,Electrical machinery and control systems, Electric machines for hybrid vehicles, Electricvehicle design, Electric vehicle conversion.

Course Content: System definition, the concept of feedback, Structures and properties of open andclosed loop control systems, Calculation of transfer function, Block diagrams, simplifyingmethods and simplification of block diagrams with MATLAB commands, Signal flowdiagrams and their properties, Transfer function calculation by Mason gain formula andthe sample applications, To be expressed of the systems in the form of state-spacedetection of state variables and be created of phase variation block diagrams.

Computational Methods in MechanicalEngineering

Course Objectives: To teach the basic numerical methods used in solving engineering problems, to gain theskill of implementation of numeric methods and to improve the ability of computer-use.

Course Content: Error analysis, Solving sets of linear equations and the equation, Solving sets ofnonlinear equations , Interpolation, Numerical differentiation, Numerical integration,numerical solution of ordinary differential equations.

/ 47



Title: Semester: 7


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

CourseCode: MTE461 Course

Title: Semester: 7


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 7


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

Powder Metallurgy

Course Content: Short history and present-day practice areas, Coordinate systems and conversioncharts, Robot arm with the representation of notasyonlandırılması and homogeneousmatrix, Direct and inverse kinematics, Jacobian matrix, Camera and image processing.

Vehicle Technology

Course Objectives: The purposes of this course are to; introduce the vehicle systems to students and givethe knowledge about vehicle performance.

Course Content: Classification of vehicles, Engine performance characteristics, Power transmissionsystem, Mechanics of the wheel and tire, Rolling resistance, Vehicle aerodynamics, Airresistance, Gradient and inertia resistance, Brake systems, Suspension systems,Chassis and car body, Steering systems.

Course Objectives: Teaching the ability to use the current processes and the technological advances inthese processes while the production of the products, shaping, determining theproperties and evaluating the results, also teaching enough Professional knowledge toproduce recomendations for production optimization.

Course Content: The importance of the industry and the production of powder metallurgy parts, Powderproduction methods, Metal powders important properties, Technological Characteristicsand Inspection of dust, Powder metallurgy parts manufacturing method and processsteps, The preparation of pressed powder, Metal powder densification and the mainevents that occur during shaping, Dust concentration methods, Sintering methods andmaterials, solid and liquid phase sintering stages and mechanisms, Latest developmentsin sintering furnaces, Common application areas of powder metallurgy.

Robotics

Course Objectives: Areas and aims to investigate the use of robots of which are expressed as amathematical movement and their basic principles to be able to tell.

/ 47



Title: Semester: 7


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 7


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 7


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

Course Objectives: Ability to appreciate of basic princibles of psychometric properties, air-conditioningprocesses, the cooling load and mass transfer calculation.

Course Content: Basic psychometric concepts, Heating, refrigeration, dehumidification and moisturemaking applications and representation at psychrometric diagram, Cooling loadcalculation, Air Duct calculation, Winter air conditioning, Summer air conditioning,Cooling Towers, Mass Transfer.

Heat Exchangers

Course Objectives: This course introduces the student to in-depth knowledge of the heat exchanger design.

Air and Space Vehicles

Course Objectives: The aim of this course is teaching design and production techniques of aerospacevehicles.

Course Content: Design synthesis, optimisation and flight simulation of novel aircraft concepts,Conceptual design methodologies for future aerospace vehicles, Development of robustcontrol-theoretical foundations for linear feedback flow control of unstable fluid systemsthat recognise the limitations set by the requirements of wall sensing and actuation,Stability analyses and provision of benchmark data for transition, Active and passivecontrol of boundary layers by surface deformation.

Basics of HVAC

Course Content: Classif ication of Heat Exchangers, Heat Transf er Analy sis of Heat Exchanger, HeatExchanger Pressure Drop and Pumping Power Design Correlations f or Condensers andEv aporators, Shell-and-Tube Heat Exchangers, Compact Heat Exchangers,Condensers and Evaporators.

/ 47



Title: Semester: 7


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 7


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 7


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

Computer Aided Manufacturing

Course Objectives: Aims of the this course is; to teach the necessary machining operations using CAMprogramme for turning and milling parts, to make the toolpath of cutting tools on turningand milling, to teach convert the toolpath to NC code, to choose the available cutting tooland machine.

Course Content: Manufacturing model creation by any type of CAD part format, Operation step organizingfor special machine center, Tool and fixture setting CNC manufacturing for specific 3dmodel, Milling, Drilling and turning operations, Cutter location data creation, inspection,simulation and post processing.

Welding Technology

Combustion Technology

Course Objectives: Teaching fourth year undergraduate students about fuels, combustion equation, andcombustion process.

Course Content: Combustion, Fuels and combustion systems.

Course Objectives: To present the welding methods, which is an important manufacturing technique, fromits theory to inspection methods; including the modern welding methods, design ofconstructions with welded areas, and application areas.

Course Content: Introduction welding machines, Welding electrodes, Welding arc and formation theory,Melting and non-melting welding types, Factors effecting the welding capability of thematerials, Welding of stainless steel and materials other than iron, Design of weldingplans and presentation of applications at various industries, Welding metallurgy, qualityat welding manufacturing and parameters affecting quality, Welding symbols, Weldingerrors, Destructive and non-destructive welding inspection methods, Labour health andwork safety during welding.

/ 47



Title: Semester: 7


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 7


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

Course Content: Introduction to parametric design techniques for 3D parametric solid modeling softwares,Parametric product (part&assembly) design, Special modules such as mold and castmodeling, sheet metal modeling, mechanism simulation design.

Material Inspection

Course Objectives: The aim of this course is teaching non-destructive inspection and destructive methodsthat used commonly in industry.

Course Content: The importance of quality control and quality control methods. Widely used non-destructive inspection methods; liquid penetrant, magnetic particle, ultrasonic,radyografik (x-ray, gamma), with eddy currents and other methods of examination.Introduction to destructive methods.

Computer Aided Design II

Course Objectives: The aim this course, to teach the advanced 3D solid modeling programs and modules,to teach making the parametric part and assembly design, to teach making mold design,cast modeling, sheet metal modeling, to consider mechanism simulation, makinganalysis depends on static and dynamic loading.

/ 47



Title: Semester: 8


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 8


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 8


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

Machine Project II

Course Objectives: The aim of this course is to make the project students who wish to specialize in onearea, individually or in groups, from the perspective of a scientific theoretical and / orpractical and to teach project preparation, presentation, prepare for working life.

Course Content: Project topic selection, Team work, A machine, a system or a process design, projectpreparation, Implementation, Completion of all the stages.

Control Elements and Applications

8. Semester

Graduation Thesis

Course Objectives: The aim of the thesis is to make the thesis students who wish to specialize in one area,individually or in groups, from the perspective of a scientific theoretical and / or practicaland to teach thesis preparation, presentation, prepare for working life.

Course Content: Graduation thesis topic selection, Team work, A machine, a system or a process design,Thesis preparation, Implementation, Completion of all the stages.

Course Objectives: The main goal of the course to students, introduce control elements, control elements toexplain the principles of application of the control system can set up to provide trainin.

Course Content: Introduction to Industrial automatic control systems, Sensors used in industrial automaticcontrol systems, Transducers and applications, Operational amplifier and applications,analog digital (ADC), Digital analog (DAC), Frequency voltage (F / V), Voltage frequency(V / F) converters, Discrete circuit elements using controlled applications,Microprocessor-based control applications, Temperature and motor control systemdesign and application, Applications software and LabView control.

/ 47


CourseCode: ENG402 Course

Title: Semester: 8


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):



Title: Semester: 8


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 8


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

Course Content: Ethical concepts, Professionalism and professional ethics codes, Ethics in design,Rights and responsibilities of business life, Ethical problem-solving techniques, Risk,Safety and accidents, Responsibility for scientific research, Responsibility for theexperimental study, Powers and responsibilities of the printing and publication ofresearch results.

Computational Fluid Dynamics

Course Objectives: The student computational fluid dynamics (CFD) to introduce the principles. CFD toteach the application of fluid mechanics and heat transfer problems. Create a theoreticalfoundation on the subject. CFD'ni using a commercial program to teach the applicationof various engineering problems.

Course Content: Application of the equations of fluid mechanics and heat transfer in finite volumemethod, Equations of diffusion, Convection, and source terms, Explain the time-dependent, Quantitative approaches, algebraic equations, numerical cell structure, Finitevolume method, Diskritizasyon process, General guidelines, Examples. Computationalfluid dynamics principles of SAD entry, PHOENICS CFD code, PHOENICS how itworks, Finite volume method, Grid geometry, Algebraic equations, The solution method,Boundary conditions.

Engineering Ethics

Course Objectives: The aim of the course is provide information for engineering ethics and ethical values inbusiness.

LPG and Natural Gas Applications

Course Objectives: To teach basic concepts about LPG. To teach technical information about natural gasdistribution lines and to show their applications. In addition, students who complete thecourse learn about natural gas distribution lines and their applications.

Course Content: Type of Degree Courses Language Courses Pre-Conditions Of LPG properties of LPGstorage, LPG tanks be vapor, the tank locations, placement of LPG tanks, regulators,automatic converters, OPSO-Upson (tank and burner) Regulators, LPG hose, Fireprecautions and procedures, Bulk gas supply systems, Storage capacity, Tank Controls,Distribution jobs, PE piping works, LPG dimensions of pipes, Pipe sizes and pressurelosses, Service piping, pressure test, Natural gas main and distribution line servicecouplings, Pipe types and all kinds of standards used in the field study safety.

/ 47



Title: Semester: 8


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 8


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 8


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 8


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

Course Objectives: This course introduces the student to in-depth knowledge of the pump workingprinciples, characteristics and pump selection.

Course Content: Pump Types and Operating Principles, The pump performance curves, Cavitation andnet suction head in pumps, Pump scaling laws, The pump selection.

Heating System Design

Course Objectives: Gaining basic principles of hot-water heating systems, components, applications andautomation.

Pumps

Drying Technique

Course Objectives: To introduce students abaut drying system. Teaching drying systems application by heattransfer and fluid mechanics. Creating the theorcal bases on students abaut the subject.

Course Content: Heat treatment principles, The principles of drying, Drying technique, Drying process,Cylinder drying, Spray drying, Jet dryers, Drying of the presentation scheme, Wateractivity, Psychrometry, Drying rate, Dryer types, Principles of evaporation, Single effectevaporators, Multiple effect evaporators.

Course Content: Central hot water heating systems, Auxiliary elements, Elements selection, Heat losscalculation, Thermal insulation, Heating system automation, Energy efficiency andheating energy efficiency legislation.

Air Conditioning and Ventilation Systems Design

Course Objectives: Teaching tp project Fundamentals and rules of air conditioning.

Course Content: The introduction of ventilation and air conditioning systems, And the introduction of themachines belonging to this system, Representing use and purpose as practical.

/ 47



Title: Semester: 8


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 8


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 8


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

Aerodynamics

Course Content: Turkey's overall energy situation, the structure of Turkish industry, energy consumption,energy management, measurement instruments and measurement techniques, thewinner in the energy efficiency increased, electrical systems, lighting energy savings,economic analysis, environment, alternative energy sources, combined heat-powerproduction systems. Measurements of the measurement instruments and measurementtechniques can be able to apply, Boilers Boosting energy efficiency can comprehend. Toknow the electrical system, able to apply methods of economic analysis. To know theenvironmental laws. Combined heat-power generation systems.

Modern Welding Methods

Course Objectives: The purpose of this course is to give detailed knowledge to the student about fusion andsolid state welding techniques.

Course Content: Introduction of specific welding method, Fusion welding method, Solid state weldingmethod, Pressure welding method, Resistance welding method and Welding and cuttingwith power beams methods.

Course Objectives: To give the basic concepts of incompressible aerodynamics, To solve the problems ofthe basic aerodynamics

Course Content: Ideal flow models, wing profiles, thin profile theory, finite wing theory, effects ofcompressibility and viscosity.

Industrial Energy Efficiency

Course Objectives: To know the status of Turkey's overall energy. To know the structure of the TurkishIndustry and comprehending energy consumption. To understand energy management.

/ 47



Title: Semester: 8


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 8


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 8


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

Course Objectives: People make up the structure of bone, muscle, cartilage, tendon, nerve, blood and otherstructures and mechanical properties of engineering analysis approach.

Course Content: General anatomical information, Biological materials, bone, cartilage, muscle, tendon,nerve and soft tissue structure and mechanical properties, Biological classification ofstructural elements: arm, leg, spine and knee cap, The dynamics of the musculoskeletalsystem, Resistance of biological material, Stress-strain analysis.

Maintenance and Repair in Manufacturing

Course Objectives: To understand the today’s principles of maintenance and breakdown finding. Tounderstand the breakdown warning and detection systems. To prepare the breakdownfinding flow chart. To care and to repair on the electrical-electronic components,electrical machinery and mechanical systems.

Computer Aided Constructive Forming

Course Objectives: Based on the information the students have taken different courses; a machine and / orsystem design and draw, the project report format, load and resistance to the accountsof the system can also be used materials.

Course Content: Fundamentals of machine desing, Conceptual desing and innonation, Design inputparameters, Reviewing fundamentals of related courses (such as Thermodynamics,Heat Transfer, Fluid Mechanics, Engineering Materials, Strength of Materials, 3D CAD),Design process and preparing solid models/technical drawings, Economical analysisand life estimation, project report and its presentation.

Intoduction to Biomechanics

Course Content: Maintenance and repair concepts, Requirement of maintenance, Transition fromunplanned maintenance to planned maintenance, Planned, preventive, predictivemaintenance systems, Statistical applications and reliability on maintenance planning,Total Productive Maintenance (TPM).

/ 47



Title: Semester: 8


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 8


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 8


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

Agricultural Machinery

Course Objectives: The aim of this course is to teach the agricultural mechanization system, generalfeatures of agricultural equipment and machinery for agricultural production, agriculturaltractors and energy resources in agriculture.

Course Content: In this course, agricultural tools and machinery using in agricultural production will beexplained as theoretical and applied.

Plastic Forming

Dynamic Systems Design

Course Objectives: To present the dynamical systems. To present the mathematical analysis methods in themodeling of dynamical systems and to understand the modeling methods with examples.

Course Content: Introduction to Modeling and Simulation, Formulation of engineering system models andthe system similarity, Dynamics of mechanical, fluid, electrical, electromechanical andthermal systems, Equations of motion, Dynamic behavior of the base system (theanswers), Transfer functions, Simulations of dynamics of complex systems, Stabilityanalysis of the systems, Engineering Applications: The system design and selection ofsystem components.

Course Objectives: To present the mechanical and metallurgical principles of plastic forming. To introducethe basic mathematical methdos in plastic forming and to understand the basic plasticforming methdos with examples.

Course Content: Basic principles of plastic deformation, Plastic deformation mechanisms, Effusioncriteria, Stress-strain relations in the plastic deformation, Factors affecting plasticdeformation, Cold and hot forming, Structural changes occurring after plastic forming,Plastic forming methods, Hammering, Rolling, Extrusion, Wire and rod drawing, Sheetmetal forming, Limit diagrams.

/ 47



Title: Semester: 8


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

CourseCode: MTE460 Course

Title: Semester: 8


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 8


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

Course Content: General definitions and classification of the composite materials, Analysing ofmicromechanical and macromechanical behavior of the composite materials,Applications of the composite materials, Reinforcements in a composite materials,Reinforcements-matrix interface and wetting, Processing of metal matrix composites,ceramic matrix composites and polymer matrix composites, Some commercial metalmatrix composites, Ceramic matrix composites and polymer matrix composites.

Mechatronic System and Design

Course Objectives: To ensure that Mechanical Engineering student can design mechatronic systems usingby sensitive components, rousing, electric-electronic components and microprecessors.

Course Content: An introduction to the concept of mechatronics, mechatronic systems and theircomponents. Microprocessors and microprocessor programming, Engineering designtheory, design models, systematic design, New trends in Mechatronics. Mechatronicsdesign project, Elements selection or production, Performance Testings of DesignResults.

Composite Materials and Production Methods

Course Objectives: To give information about the definition, importance, application and production methodsof composite materials. Teaching about composite structures as ceramics elastoplasticand plastic composites, metal composites etc. Industrial applications of composites andcomparison of these materials to the ones which are natural as iron, wood etc.

Thermic Turbo Machines

Course Objectives: Course under steam turbines, compressors, ventilators and a mechanical engineerfacing the most machines. In the past only used in thermal power plant turbines,vehicles and factories today are finding wide application possibilities. These machinesare very expensive in our country are produced in limited. For these reasons thesemachines project, selection and knowledgeable engineers are needed to operate.

Course Content: One-dimensional compressible fluid flow, Voice over, voice-six, sonic flow, Fluctuations,lock in the flow and sizing, Diffusers, General equation for turbo machines, velocitytriangles, pressure and velocity diagrams, power, Steam Turbines: Yield and losses,condensation effect, Classification, Turbine selection, Centrifugal and axial ventilators:Yield, characteristic curves, fan laws, Axial and centrifugal compressors: Speedtriangles, sizing, wing design, the characteristic curve, yield.

/ 47



Title: Semester: 8


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 8


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 8


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

Course Objectives: Steam Boilers and principles to explain the general concepts related to the design ofSteam Boilers and project basics.

Course Content: Thermodynamic properties. Construction of steam boilers. Flame-smoke and water-pipekazanlar. Water boilers. Special design steam boilers. Casting boilers. Fluidized bedboilers. Elements of the auxiliary steam boilers, water heaters, blowers institutions,ovens and combustion systems, measurement and control systems.

Thermal System Design

Course Objectives: Introduction to basic concepts of heating, heating types, stove types,chimney types andchimney connections, hot water, distribution systems, explanations of systems workingwith boiling water and vapor, boiler parts, boiler flat designing, insttallation of heatexchangers to boiler system, Heaters, burners,automatic control on and energy saving,insulation applications.

Steam Boilers

Course Content: Analysis, design, and optimization of thermal systems, Modeling of thermal systems andcomponents, Thermal system component characteristics and their effect on overallsystem performance, Relationship among thermal sciences in design process,Introduction to thermoeconomic optimization.

Transport Techniques

Course Objectives: Main purpose of the course students, giving knowledge abaut lifting and movingmachinery-related topics in basic engineering design projects.

Course Content: Lifting and handling machinery elements; load related components, drive components,motors and gearboxes between loads, Pulleys and pulley systems, drums, Stop andload holding brakes, lock gears. wheels and rails, Feeders and belt, chain, vibratory,endless screw conveyors, Pneumatic conveying systems. Design projects.

/ 47



Title: Semester: 8


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 8


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):


Title: Semester: 8


CourseLevel:

BSc -Bachelor

ofScience


Delivery:Work

Placement(s):

Mechanical Vibrations

Course Objectives: To present the basic characteristics of vibrations and their place and importance in themechanical engineering applications.To teach and to apply the methods using analysisof engineering problems including vibrations.

Course Content: Basic concepts, Degree of freedom systems: Equations of motion, damped andundamped vibrations, free and forced vibrations, the system response to forcing,Vibration isolation, Two degree-of-freedom systems: Equations of motion, coordinatetransformation, natural coordinates, vibration modes, Torsional vibrations. Introductionto multi degree-of-freedom systems.

Die/Mold Design Techniques

Course Content: Introduction to heat treatment, Physical metallurgy of Fe-Fe3C alloy, Iron carbon alloys,Isothermal retention and steady cooling, Transformation diagrams, The general heattreatment method and principles, Hardening and tempering, austempering andmartempering, Effects of alloy elements to hardableness, Hardableness, Determinationof hardableness with Grossman and Jominy method, Surface hardening, Precipitationhardening, Tool steels, Cast irons, Thermal processing of stainless steel, Heattreatments that can be applied to non-ferrous alloys.

Course Objectives: This course introduces the student to in-depth knowledge of the design and manufactureof dies and molds for metal engineering and plastics components. It gives skills inassessing the related performance of tooling and processes. It also concentrates on thecomponents of dies and molds and related process parameters in order to obtain qualityfinished products.

Course Content: Die design basics and theory of sheet metal, Metal stamping dies, their construction,and assembly, Metalworking machinery, Blanking and piercing operations, Blankcalculation or flat layout, Bending and forming operations, Die process quality andautomation, die maintenance, Springs, their design and calculations, Materials andsurface finish, Case Studies for Dies, Mold design basics, Molding Cycle, MoldClassifications, Mold Components: Cavity and Core, Runner Systems, Conventional,Runnerless, Gate Types, Temperature Control, Vents, Ejector Systems, Interlocks, MoldActions and Undercuts, Unscrewing Molds, Shrinkage of Plastics and Rates, Plastic PartAnalysis, Case Studies for Molds, Cost estimation for dies and molds, Safety in Die andMold Processes.

Heat Treatment

Course Objectives: To give information and practice about the general heat treatment information,applications and principles, and the heat treatment of the ferrous and non-ferrous alloys.

/ 47

1. Semestermuh.karabuk.edu.tr/makine/doc/syllabus/mechanical... · 2018-07-27 · technical...

Documents

Transcript of 1. Semestermuh.karabuk.edu.tr/makine/doc/syllabus/mechanical... · 2018-07-27 · technical...