1-12 Tripac Catalog

14 GAUGE 14 GAUGE 11--5/8” 5/8” XX 13/16” 13/16”

14 GAUGE 14 GAUGE 11--5/8” 5/8” XX 1 1--5/8” 5/8”

12 GAUGE 12 GAUGE 11--5/8” 5/8” XX 1 1--3/8” 3/8”

12 GAUGE 12 GAUGE 11--5/8” 5/8” XX 2 2--3/4” 3/4”

12 GAUGE 12 GAUGE 11--5/8” 5/8” XX 1 1--5/8” 5/8”

12 GAUGE 12 GAUGE 11--5/8” 5/8” XX 3 3--1/4” 1/4”

12 GAUGE 12 GAUGE 11--5/8” 5/8” XX 2 2--7/16” 7/16”

12 GAUGE 12 GAUGE 11--5/8” 5/8” XX 4 4--7/8” 7/8”

12 GAUGE 12 GAUGE 11--5/8” 5/8” XX 3 3--1/4” 1/4”

12 GAUGE 12 GAUGE 11--5/8” 5/8” XX 6 6--1/2” 1/2”

HALF SLOTS HALF SLOTS 9/16” 9/16” XX 1 1--1/8” 1/8” 2” ON CENTER2” ON CENTER

LONG SLOTS LONG SLOTS 13/32” 13/32” XX 3” 3”

4” ON CENTER4” ON CENTER

HOLES HOLES 9/16” 9/16”

11--7/8” ON CENTER 7/8” ON CENTER

HALF SLOTS HALF SLOTS 9/16” 9/16” XX 1 1--1/8” 1/8”

2” ON CENTER FOR 2” ON CENTER FOR BACK TO BACK BACK TO BACK

STRUT STRUT

AVAILABLE FINISHES: AVAILABLE FINISHES: PRE GALVANIZED, PRE GALVANIZED, HOT DIP GALVANIZED, T HOT DIP GALVANIZED, T--304, T304, T--316 AND 316 AND FIBERGLASS FIBERGLASS

STRUT

475 KLUG CIRCLE • CORONA, CA 92880-6406 (800) 720-8771 • FAX: (888) 718-0696

A DIV IS ION OF TR IPAC MARKET ING, INC.

11

(2) PIECE PIPE CLAMP FOR (2) PIECE PIPE CLAMP FOR THIN WALL CONDUIT (3/8” TO 2”) THIN WALL CONDUIT (3/8” TO 2”)

E.M.T. (3/8” TO 2”) E.M.T. (3/8” TO 2”) RIGID STEEL (3/8” TO 8”) RIGID STEEL (3/8” TO 8”)

O.D. TUBING (1/4” TO 12”) O.D. TUBING (1/4” TO 12”)

AVAILABLE FINISHES: AVAILABLE FINISHES: ELECTRO GALVANIZED, ELECTRO GALVANIZED, HOT DIP GALVANIZED, T HOT DIP GALVANIZED, T--304, T304, T--316 AND 316 AND FIBERGLASS FIBERGLASS

(1)(1) HOLE PIPE STRAP HOLE PIPE STRAP SIZES 1/4” TO 1” O.D.SIZES 1/4” TO 1” O.D.

USED WITH 1/4” HARDWARE

PIPE CLAMPS/STRAPS



PIPE SIZE

BOLT SIZE

MAT’LTHICK

1/2” 1/4” 1/8”

3/4” 1/4” 1/8”

1” 1/4” 1/8”

1-1/4” 1/4” 1/8”

1-1/2” 1/4” 1/8”

2” 3/8” 1/4”

2-1/2” 3/8” 1/4”

3” 3/8” 1/4”

3-1/2” 3/8” 1/4”

4” 3/8” 1/4”

5” 3/8” 1/4”

6” 3/8” 1/4”

8” 1/2” 1/4”

(2) HOLE PIPE STRAP (2) HOLE PIPE STRAP REQUIRES HEX BOLT AND SPRING NUT REQUIRES HEX BOLT AND SPRING NUT

ORDER SEPERATLYORDER SEPERATLY

22

SPRING NUTS FOR 13/16” , SPRING NUTS FOR 13/16” , 1 3/8”, 1 5/8”, 2 7/16” 1 3/8”, 1 5/8”, 2 7/16”

AND 3 1/4” STRUT AND 3 1/4” STRUT SIZES 1/4” THROUGH 3/4” SIZES 1/4” THROUGH 3/4”

DIAMETER HOLES DIAMETER HOLES

1/4” SPRING NUT = 1/4” 1/4” SPRING NUT = 1/4” XX 1” HEX BOLT 1” HEX BOLT 3/8” SPRING NUT = 3/8” 3/8” SPRING NUT = 3/8” XX 1 1/4” HEX BOLT 1 1/4” HEX BOLT 1/2” SPRING NUT = 1/2” X 1 1/4” HEX BOLT 1/2” SPRING NUT = 1/2” X 1 1/4” HEX BOLT 5/8” SPRING NUT = 5/8” X 1 1/4” HEX BOLT 5/8” SPRING NUT = 5/8” X 1 1/4” HEX BOLT 3/4” SPRING NUT = 3/4” X 1 1/4” HEX BOLT 3/4” SPRING NUT = 3/4” X 1 1/4” HEX BOLT


SPRING NUTS



33

SINGLE CHANNEL SINGLE CHANNEL SHORT CLEVIS SHORT CLEVIS

SQUARE POST BASESQUARE POST BASE

SINGLE CHANNEL SINGLE CHANNEL TALL CLEVIS TALL CLEVIS


DOUBLE CHANNEL DOUBLE CHANNEL SHORT CLEVIS SHORT CLEVIS


DOUBLE CHANNEL DOUBLE CHANNEL TALL CLEVIS TALL CLEVIS


SPRING NUT HOLES = 9/16” DIA. SPRING NUT HOLES = 9/16” DIA. MOUNTING HOLES = 3/4” DIA. MOUNTING HOLES = 3/4” DIA. MATERIAL THICKNESS = 1/4”MATERIAL THICKNESS = 1/4”


POST BASES



44

SQUARE STRUT SQUARE STRUT WASHERWASHER

(3) HOLE (3) HOLE SPLICE PLATESPLICE PLATE

(2) HOLE (2) HOLE SPLICE PLATESPLICE PLATE

ANGLE PLATEANGLE PLATE

TEE PLATETEE PLATE

CROSS PLATECROSS PLATE

(4)(4) HOLE HOLE GUSSET PLATE GUSSET PLATE

OTHER PLATE OTHER PLATE CONFIGURATIONSCONFIGURATIONS

SPRING NUT HOLES = 9/16” DIA. SPRING NUT HOLES = 9/16” DIA. MATERIAL THICKNESS = 1/4”MATERIAL THICKNESS = 1/4”


FLAT FITTINGS



55

ANGLE FITTINGS

(2) HOLE END (2) HOLE END CONNECTORCONNECTOR

(2) HOLE RACK (2) HOLE RACK ADJUSTMENT ANGLEADJUSTMENT ANGLE ANGLE CONNECTORANGLE CONNECTOR

(4) HOLE SPLICE (4) HOLE SPLICE CONNECTORCONNECTOR

(3) HOLE END (3) HOLE END CONNECTORCONNECTOR

(4) HOLE END (4) HOLE END CONNECTOR CONNECTOR

WITH GUSSETWITH GUSSET

(5) HOLE CORNER SPLICE (5) HOLE CORNER SPLICE CONNECTORCONNECTOR

OTHER ANGLE FITTING OTHER ANGLE FITTING CONFIGURATIONSCONFIGURATIONS





SLOTTED U FITTINGSLOTTED U FITTING FOR 1 5/8” STRUTFOR 1 5/8” STRUT

U U -- FITTING FOR ALL FITTING FOR ALL STRUT SIZESSTRUT SIZES

U U -- FITTING FOR FITTING FOR DOUBLE STRUTDOUBLE STRUT

(2) HOLE (2) HOLE CLEVIS CONNECTORCLEVIS CONNECTOR

(4) HOLE (4) HOLE SPLICE FITTINGSPLICE FITTING

(2) HOLE (2) HOLE SPLICE FITTINGSPLICE FITTING



U - FITTINGS



77

(3) HOLE (3) HOLE CORNER ANGLECORNER ANGLE



(6) HOLE (6) HOLE THREE SIDE THREE SIDE

ANGLE CONNECTORANGLE CONNECTOR

(9) HOLE (9) HOLE THREE SIDE THREE SIDE


(5) HOLE (5) HOLE TWO SIDE TWO SIDE


(8) HOLE (8) HOLE TWO SIDE TWO SIDE


(8) HOLE (8) HOLE CORNER ANGLE CONNECTORCORNER ANGLE CONNECTOR

(8) HOLE (8) HOLE CORNER ANGLE CONNECTOR CORNER ANGLE CONNECTOR

WITH GUSSETWITH GUSSET



WING FITTINGS



88

ADJUSTABLE Z ADJUSTABLE Z CONNECTOR CONNECTOR

FOR 1 5/8” AND FOR 1 5/8” AND 13/16” STRUT13/16” STRUT

Z SUPPORT Z SUPPORT ROR ALL STRUT SIZESROR ALL STRUT SIZES

(2) HOLE (2) HOLE Z CONNECTOR Z CONNECTOR

LENGTH RANGE 4” TO 8”LENGTH RANGE 4” TO 8”



Z - FITTINGS



99

(4) HOLE CLOSED (4) HOLE CLOSED ANGLE FITTING ANGLE FITTING

(4) HOLE OPEN (4) HOLE OPEN ANGLE FITTING ANGLE FITTING

3030°°, 45, 45°° AND 60 AND 60°°

(2) HOLE CLOSED (2) HOLE CLOSED ANGLE FITTING ANGLE FITTING 4545°° AND 60 AND 60°°

(2) HOLE OPEN (2) HOLE OPEN ANGLE FITTING ANGLE FITTING

3030°°, 45, 45°° AND 60 AND 60°°



BRACE FITTINGS



1010

AVAILABLE FINISHES: AVAILABLE FINISHES: ELECTRO GALVANIZED, HOT DIP GALVANIZED ELECTRO GALVANIZED, HOT DIP GALVANIZED

BEAM CLAMP BEAM CLAMP WITH LONG UWITH LONG U--BOLTBOLT

BEAM CLAMP BEAM CLAMP WITH SHORT UWITH SHORT U--BOLTBOLT

LIGHT DUTY BEAM CLAMP LIGHT DUTY BEAM CLAMP HEAVY DUTY BEAM CLAMPHEAVY DUTY BEAM CLAMP

BEAM CLAMPS



1111

STRUT PIPE ROLLERS

AVAILABLE FINISHES: AVAILABLE FINISHES: ELECTRO GALVANIZED, HOT DIP GALVANIZED ELECTRO GALVANIZED, HOT DIP GALVANIZED



STRUT PIPE ROLLER STRUT PIPE ROLLER WITH OUT AXLE WITH OUT AXLE

(FOR PIPES 1” THROUGH 4”) (FOR PIPES 1” THROUGH 4”) STRUT PIPE ROLLER STRUT PIPE ROLLER

WITH AXLE WITH AXLE (FOR PIPE SIZES 1” THROUGH 10”) (FOR PIPE SIZES 1” THROUGH 10”)

SHORT PATTERN ROLLER SHORT PATTERN ROLLER (FOR PIPE SIZES 2” THROUGH 20”)(FOR PIPE SIZES 2” THROUGH 20”)

PIPE SIZES

BOLT SIZE

2” - 3” 1/2”

4 - 6” 1/2”

8 - 10” 1/2”

12” - 14” 3/4”

16” - 20” 3/4”

USED WITH 1/2” HARDWARE USED WITH 1/2” HARDWARE

1212

1-12 Tripac Catalog

Documents

Transcript of 1-12 Tripac Catalog