0904 Epsilon 24.05.2005 10:55 Uhr Seite...
Transcript of 0904 Epsilon 24.05.2005 10:55 Uhr Seite...
EPSILON UNLIMITED
English
0904_Epsilon 24.05.2005 10:55 Uhr Seite 1
E65L, E75L 45
3
E90L, E110L 67
E140L, E160L 89
E190LS, E250L, E260L 1011
E65Z, E75Z 1213
E90Z, E110Z, E120Z 1415
E140Z, E165Z 1617
E250Z 18
1928
29
29
30E380L
Equipment
Timber grabs
Accessories
Content page
= EPSILON for more applications than you imagine
Power+ Speed+ Precision
0904_Epsilon 24.05.2005 10:56 Uhr Seite 2
4
E65L76 / E75L76
E65L / E75L
5
76
VAshort stabilizer legs
lifted weight, net without accessories
crane type E65L E75Llifting moment net [kNm] 65 75slewing torque net [kNm] 14 16slewing angle [°] 425 425max. outreach [m] 7,6 7,6operating pressure [bar] 195 220max. pump capacity [l/min] 2x60 2x60dead weight [kg] 1370 1420
0904_Epsilon 24.05.2005 10:56 Uhr Seite 4
6
E90L82 / E110L82E90L97 / E110L97
E90L / E110L
7
82
80
97
80V
74
67
82 80 97 80V 74 67
Nshort column
lifted weight, net without accessories
crane type E90L E110Lboom system 82 80 97 80V 74 67 82 80 97 80V 74 67lifting moment net [kNm] 89 89 86 89 90 90 107 107 103 105 105 107slewing torque net [kNm] 24 27slewing angle [°] 425 425max. outreach [m] 8,2 8,0 9,7 8,0 7,4 6,7 8,2 8,0 9,7 8,0 7,4 6,7operating pressure [bar] 215 200 235 225max. pump capacity [l/min] 2x60-70 2x60-70dead weight [kg] 1810 1800 1890 1840 1780 1750 1860 1850 1940 1890 1820 1790
0904_Epsilon 24.05.2005 10:56 Uhr Seite 6
8
E140L82 / E160L82E140L96 / E160L96
E140L / E160L
9
82
80
96
103
79V
94V
82 80 96 103 79V 94V
Nshort columnlifted weight, net without accessories
crane type E140L E160Lboom system 82 80 96 103 79V 94V 82 80 96 103 79V 94Vlifting moment net [kNm] 134 136 131 126 134 125 152 153 149 143 151 142slewing torque net [kNm] 30 32slewing angle [°] 425 425max. outreach [m] 8,2 8,0 9,6 10,3 7,9 9,4 8,2 8,0 9,6 10,3 7,9 9,4operating pressure [bar] 230 255max. pump capacity [l/min] 2x80 2x80dead weight [kg] 2290 2210 2350 2390 2340 2420 2350 2270 2400 2450 2400 2480
0904_Epsilon 24.05.2005 10:56 Uhr Seite 8
10
E190LS / E250LE260L
11
82
95
87
107
128
130
88
83
96
82 9587 107
FD250
83 9688
E190LS82 / E250L82 E260L83
crane type E190LS E250L E260Lboom system 82 87 95 107 128 130 82 87 95 107 83 88 96lifting moment net [kNm] 181 177 165 157 152 144 241 230 221 213 251 241 231slewing torque net [kNm] 33 36 39slewing angle [°] 395 395 395max. outreach [m] 8,2 8,7 9,5 10,7 12,8 13,0 8,2 8,7 9,5 10,7 8,3 8,8 9,6operating pressure [bar] 215 270 260max. pump capacity [l/min] 2x90 2x90 2x90dead weight [kg] 2050 2140 2300 2460 2380 2510 2050 2140 2300 2460 2200 2290 2450dead weight SRX47 [kg] 450dead weight FD250 [kg] 550
lifted weight, net without accessories
0904_Epsilon 24.05.2005 10:56 Uhr Seite 10
12
E65Z72 / E75Z72
E65Z / E75Z
13
72
VAshort
stabilizer legs
lifted weight, net without accessories
crane type E65Z E75Zlifting moment net [kNm] 65 75slewing torque net [kNm] 14 16slewing angle [°] 425 425max. outreach [m] 7,2 7,2operating pressure [bar] 195 220max. pump capacity [l/min] 2x60 2x60dead weight [kg] 1390 1440
0904_Epsilon 24.05.2005 10:56 Uhr Seite 12
14
E90Z81 / E110Z81E120Z81 E90Z96 / E110Z96 / E120Z96
E90Z / E110Z / E120Z
15
81
79
96
74
81 79 96 74
GZL
GN
ATTENTION : use of GN reduces max. outreach by 250mmand lifting capacity by 5%
lifted weight, net without accessories
crane type E90Z E110Z E120Zboom system 81 79 96 74 81 79 96 74 81 79 96 74lifting moment net [kNm] 87 88 86 89 101 101 99 102 110 111 107 111slewing torque net [kNm] 24 27 28slewing angle [°] 425 425 425max. outreach [m] 8,1 7,9 9,6 7,4 8,1 7,9 9,6 7,4 8,1 7,9 9,6 7,4operating pressure [bar] 215 240 260max. pump capacity [l/min] 2x60-70 2x60-70 2x60-70dead weight [kg] 1870 1840 1930 1840 1920 1890 1980 1890 2020 1990 2080 1990
0904_Epsilon 24.05.2005 10:56 Uhr Seite 14
16
E140Z81 / E165Z81E140Z95 / E165Z95
E140Z / E165Z
17
81
79
95
81
79
95
GZL
GN
crane type E140Z E165Zboom system 81 79 95 81 79 95lifting moment net [kNm] 137 139 134 156 156 153slewing torque net [kNm] 30 32slewing angle [°] 425 425max. outreach [m] 8,1 7,9 9,5 8,1 7,9 9,5operating pressure [bar] 225 250max. pump capacity [l/min] 2x80 2x80dead weight [kg] 2370 2310 2430 2430 2370 2490
lifted weight, net without accessories
ATTENTION : use of GN reduces max. outreach by 250mmand lifting capacity by 5%
0904_Epsilon 24.05.2005 10:56 Uhr Seite 16
18 19
E250Z
GZL
Equipment
lifted weight, net without accessories
standard equipment special equipment - not available
Standard equipment E65LE75L
E90LE110L
E140LE160L
E190LSE250LE260L
E65ZE75Z
E90ZE110ZE120Z
E140ZE165Z
E250Z Seite
Double circuit (2K)
Top seat mounted behind crane column, seat adjustable in distance, access from both sides 22
Control 2 joysticks, 2 pedals (KH) 22
Integrated stabilizer beam, hydraulically extendable outriggers -Hydraulic stabilization control, 3 sections from top seat - - 22
Stabilizers automatically tiltable up to 45° (SRX47, E250Z upon request) - - 24
Main cylinder protection 24
Outer boom cylinder protection - - -Spot lights, completely wired 23
KTL priming, powder coating RAL 3020 25
CE equipment: emergency stop, throttle check valve on lifting cylinder, outer boom ram and telescopic cylinder 1) 23
Special equipment
N short crane column - - - - - -GN inclined crane column (only in combination with HLL, HLR, HKL, HKR or RCE) - - - - - -GZL crane base in inverted position - - - -1K single circuit operation for standard top seat 23
1KHL single circuit operation for top seat HLL or HLR - -4L 4 linear levers, 2 pedals for standard top seat 22
5L 5 linear levers, 1 pedal for standard top seat 22
CP comfort package 23
CPD comfort package Germany 23
RAL special colour RAL 25
TOÜ dead point over stabilizer beam 24
TOG dead point opposite stabilizer beam 24
HVL/HVR top seat with adjusting chocks HVL alignment left HVR alignment right - - 23
HLL/HLR lateral top seat with linear levers HLL left mounted HLR right mounted - - 23
HKL/HKR lateral top seat with joysticks/pedals HKL left mounted HKR right mounted - - 22
LT ladder for lateral top seat, mounted behind crane column - - - - - 22
AS90 stabilizers automatically tiltable up to 90° - - - - - - - 24
AS180 stabilizers hydraulically tiltable up to 180° 24
TV 180 mm extended stabilizer plate
RX47 outriggers, max. 4,7 m - - -SRX47 stabilizer bridge without control valve, RAL3020 - - - - - - -FD250 flap down stabilization without control valve, RAL3020 - - - - - - -D4 stabilizer valve PVG32 4 sections with electrical control (loose) - - - - - - 22
DM4 stabilizer valve PVG32 4 sections with priority valve and electrical control, mounted - - - - 22
DM7 stabilizer valve PVG32 7 sections with priority valve and electrical control, mounted - - - - 22
FHS main cylinder and slewing system operated at ground level - - - - 24
FAS stabilization 3 sections operated at ground level - - - - 24
F5 FHS + FAS - - - - 24
1S 1 free section on top seat - - 23
AX2 separately hydraulically extendable outriggers (only with RX47 and 1S / RCE) - - - - 24
LO LHV + OSM 23
RCEradio remote control Hetronic with Danfoss PVG32
- - - - 25control versions: 6 x X 3 x XY 2 x XYZ
CAcabin with IQAN control and L90LS control valve
- - - - 26DH AC KC LM
KP/VP constant pump/variable pump for RCE and CA KP VP - - - -C5 Code 5, extra hose for weighing system - - - -SD damper units Hultdins for standard top seat, mounted for slewing and lifting cylinder - 24
GA grab saw equipment (not in combination with 1K) - - - - 24
KFS operator protection, mounted 23
KM fixed heel - - - - - 24
GLC bracket for Hultdins grab (GLC40, GLC50) - - - -VA short stabilizer legs - - - -SK quick release couplings 25
HPLS increased lifiting capacity with electrical control 24
SBP protection covers for stabilizer legs and control valves on standard top seat 25
SLP substitute hose package for standard top seat - -
1) applies only for timber cranes, in case of scrap and recycling application LO is necessary
crane type 95lifting moment net [kNm] 210slewing torque net [kNm] 36slewing angle [°] 395max. outreach [m] 9,5operating pressure [bar] 260max. pump capacity [l/min] 2x90dead weight [kg] 2980
0904_Epsilon 24.05.2005 10:56 Uhr Seite 18
2120
maintenance-free hose and chain rollers with ball bearings
double telescopic extension with inlaid protected hoses- high speeds by means of chain drive- optimal guidance of telescopic arms due to long boom overlap
Double telescopic extension
inlaid protected pipes in the outerboom and laterally adjustable, large-scaleguide blocks
optimal protection due to inlaid protected hoses exterior hoses available(except on E65L, E75L, E65Z, E75Z)
inlaid protected pipes in the outerboom and laterally adjustable, large-scaleguide blocks (on E65L, E75L, E65Z andE75Z pipes outside)
Equipment
Single telescopic extension
linkage system between main boomand outer boom on E190LS, E250L, E260L- constant power and operation speed- 176° working angle without dead point
linkage system between column and main boom on E90Z, E110Z, E120Z, E140Z, E165Z, E250Z, E260L- more lifting power of up to 60 % in the upper working area- constant main boom speed throughout the total working area
Linkage system
carrying force with linkage system
carrying force without linkage system
advantage of linkage system on Z-cranes
low mounted double rack slewing system in oil bath, two solid round racks, end stroke suppression on all slewing cylinders (on E65L, E75L, E65Z und E75Z single rack slewingsystem)
high-quality self-aligning roller bearings
robust cast crane column
Equipment
Crane base
standard equipment special equipmentspecial equipmentstandard equipment
0904_Epsilon 24.05.2005 10:56 Uhr Seite 20
22 23
1850
1120
180
830
76088
01850
....2
030
830
480
530
1120.....1170
180
7801070
82018
50...
..203
083
0
550
870
1210....1260
180
B
1150
1000
1170....1220
430
1580 18
30 2130
2630
1730
720880
HVL
HVR
CE-equipment
Electronics
high-quality VOAC-valvesHVL, HVR top seat with adjustable chocks, alignmentleft or right
slewing angles of HLL, HLR (all models except E190LS, E250L, E260L,E250Z)
HLL, HLR lateral top seat onleft or right side, 9 linear leversincl. stabilization, single anddouble circuit available,without ladder (all models exceptE190LS, E250L, E260L, E250Z)
Equipment
Lateral top seat with linear levers
KFS operator protectionmounted (not in combinationwith HKR, HKL ,HLR, HLL,HVL, HVR)
1S 1 extra section on top seat1K single circuit hydraulicwith lock-out switch(for E190LS, E250L, E250Z,E260L)
1K single circuit hydraulic withparallel connection(all models except E190LS, E250L, E260L,E250Z)
CPD comfort packagelike CP but with inclinationmonitoring and main boommonitoring
CP comfort packageconsisting of:- engine RPM- engine start/stop- spot lights from truck cabin
spot lightsconsisting of 4 spot lights (2 on top seat, 2 on outer boom) andelectric control from top seat
LO load holding valve and overload protectionmanometer as optical overload monitoringemergency stop function
Scrap and recyclingTimber applicationmanometer as optical overload protectionemergency stop functionthrottle check valve for lifting cylinder, outer boom ram andtelescopic cylinder
slewing radius GNof E90Z, E110Z, E120Z, E140Z,E165Z, mounted on 1850mmfrom factory, different heightupon request
LT ladder for HKR / HKL
slewing radiusof E90Z, E110Z, E120Z, E140Z,E165Z, mounted on 1850mmfrom factory, different heightupon request
slewing radiusof E90L, E110L, E140L, E160L
HKR / HKL lateral top seat on the right / left side (2 joysticks, 2 pedals) stabilization hydraulically from top seat, single or doublecircuit available
Lateral top seat with joystick controls
4L 4 linear levers and 2 pedals
5L 5 linear levers and 1 pedal
D4 stabilizer valve PVG32 4 sections with electrical control (loose)
DM4 stabilizer valve PVG32 4 sections with priority valve and electrical control, mounted
DM7 stabilizer valve PVG32 7 sections with priority valve and elec-trical control, mounted
hydraulic control of stabilization from top seat(for E65L, E75L, E90L, E110L,E140L, E160L, E65Z, E75Z, E90Z,E110Z, E120Z, E140Z, E165Z)
standard top seat with double circuit, directly pivoted controlwith 2 joysticks and 2 pedals, adjustable seat with armrests
Top seat
Equipment
standard equipment special equipmentspecial equipmentstandard equipment
0904_Epsilon 24.05.2005 10:56 Uhr Seite 22
24 25
E65L, E75L, E90L, E110L, E140L,E160L
E190LS, E250L, E260L E90Z, E110Z, E120Z, E140Z,E165Z, E250Z
E65Z, E75Z, E90Z, E110Z, E120Z,E140Z, E165Z, E250Z
TOG
TOÜ
TOG TOÜGZR
TOGGZR
TOÜGZL
TOGGZL
TOÜ
dismounting of outriggercylinder without dismantlingof outrigger
dismounting of telescopiccylinder without dismantlingof extension boom
easy change of inlaid, protected hoses
Service-friendly
quality in every RAL colourpowder coating with burn-in process at 200°C
KTL-coating with burn-in process at 160°C
Coating
SK quick release couplingsSCR / SCL stand up controlwith linear levers and invisibleoperator’s protection(upon request)
RCE radio remote control with 10 sections Danfoss PVG 324 on/off sections stabilization, transmitter Hetronic ( 6 x X, 3 x XY,2 x XYZ) only in combination with AX2, RX47 and LO
SBP protection covers for stabilizer legs and control valves on standard top seat
Radio remote control
Equipment
HPLS increased lifting capacity with electrical control
SD damper units for mainand slewing cylinder
GA grab saw equipment with pedal control and exterior hoses(only in double circuit for E90L, E110L, E140L, E160L, E90Z, E110Z,E120Z, E140Z, E165Z)
KM fixed heelfor E190LS, E250L
KM fixed heelfor E140Z, E165Z, E250Z
ground level controlFHS main boom + slewingFAS stabilization 3 sectionsF5 FHS + FAS
main cylinder protection
Other equipment
Dead point
AX2 separately hydraulicallyextendable outriggers (only incombination with RX47 and1S or RCE)
AS180 stabilizers hydraulicallytiltable up to 180°
AS90 stabilizers automaticallytiltable up to 90°
stabilizers automatically tiltable up to 45°
Stabilization
Equipment
standard equipment special equipmentspecial equipmentstandard equipment
0904_Epsilon 24.05.2005 10:56 Uhr Seite 24
2726
F
F
A
B
indicator main boom control
indicator water temperature truck
A new dimension of crane operation
windscreen washer
windscreen wiper
joystick ON/OFF
change-over switch
A.....6 crane functions
B.....3 stabilizer functions, cabin lift, 1 free section
joystick with 3 prop. functions
LM display
spot lights cabin and crane
indicator oil level truck
fuses
air conditioning
warning lamp
indoor lighting
seat heating
interval switch wiper
3-stage ventilator switch
emergency stop (engine)
DH diesel heater
engine start/stop
RPM +
fuses
MDM display
service friendly due to foldable seat console
water container for washercomfortable seat with headrest, sash window on both sides, allcontrol functions integrated in the arm rests
2 loudspeakers, indoor lighting
RDS radio with CD player
Cabin Interior
Equipment
A comfortable new crane future
• electric hydraulic control with VOAC L90LS and IQAN, all 11 functions proportionally operated
• MDM-display offers individual setting options and display of service inspections
• smallest possible hose set between crane base and column due to two separate control valves
• liftable cabin
• front and side door (front window made of 8 mm Lexan safety glass with protection cover)
• low weight construction
• all parts KTL-undercoated and powder coated
• water heating with thermostatand three-stage fan
• seat heating
• damper units (Hultdins)
Standard EquipmentCabin CA
Equipment
standard equipment special equipment
0904_Epsilon 24.05.2005 10:57 Uhr Seite 26
28 29
E90L, E110LE140L, E160L
E90Z, E110Z, E120ZE140Z, E165Z
GZL
A B C D E F G
E90LE110L 1390 1340 980 1250 620 2410 3510
E140LE160L 1410 1350 1000 1240 650 2440 3540
E90ZE110ZE120Z
1460 1410 980 1280 600 2390 3490
E140ZE165Z 1490 1430 1000 1270 670 2460 3560
FG36 FG41 FG41S FG56 FG56S FG56Xa 420 510 530 510 530 560b 850 950 950 1050 1050 1150c 510 600 600 640 640 680d 340 450 460 450 460 465e 390 500 520 500 520 530f 760 770 770 780 780 995g 860 1000 1000 1040 1040 1170h 1470 1880 1880 1980 1980 2010i 90 120 120 165 165 120
Timber Grabs, Accessories
Timber GrabsFG36
- for forest machines- for forest tractors- for small short timber cranes
FG41, FG56- for short timber cranes
FG41S, FG56S- for heavy forest machines- for heavy forest tractors- for long timber cranes
FG56X- for long timber cranes in heavy application- for static cranes
Accessories
rotators
knuckle sets
oil tanks
oil coolers
mounting accessories
etc.
320 kg additional weight compared with standard equipment
Technical data
LM Loadmaster 2000, weighing device incl. pedal,completely installed
KC cable remote control forall functions ON/OFF
AC air conditioningDH diesel heater with 3-stageventilator
warning lamp5 spot lights (3 x cabin, 2 xouter boom), comfortableprotection cover
6 section control valve oncrane column with protectedelectrical box
compact hose set due to 2separate control valves oncrane base and column
Special Equipment Cabin
Cabin Exterior
Equipment
special equipmentstandard equipment
Type FG36 FG41 FG41S FG56 FG56S FG56Xgripping area [m2] 0,36 0,4 0,4 0,5 0,5 0,5load capacity [kg] 4000 5000 6000 5000 7000 9000max. operat. pressure [MPa] 24 23 24 23 24 27gripping force (20MPa) [kN] 13 16 16 15 15 16dead weight [kg] 175 215 250 225 260 340
0904_Epsilon 24.05.2005 10:57 Uhr Seite 28
30
E380L
91
153
base for static mountingX......1425mm, different height uponrequest
= Customer satisfaction with EPSILON
Variety+ Comfort+ Quality
crane type E380Lboom system 91 153lifting moment net [kNm] 371 320slewing torque net [kNm] 50slewing angle [°] endlessmax. outreach [m] 9,1 15,3operating pressure [bar] 270max. pump capacity [l/min] 2x100 1x140dead weight [kg] 3200 3940dead weight (with top seat) [kg] 3350 -
lifted weight, net without accessories
lifted weight, net without accessories
0904_Epsilon 24.05.2005 10:57 Uhr Seite 30
EPSILON Kran GmbHChristophorusstraße 30A-5061 Elsbethen Tel.: +43(0)662/629548-0Fax: +43(0)662/[email protected]
www.epsilonkran.comPR004_GB
Issue 05/05
This brochure is meant for international use. The availability of some models and the model and special equipment may vary from country to country. EPSILON reserves the right to change design or technical specification at anytime without prior notice. Any changes would not be applied retrospectively to previously sold units. Information, description and illustrations are correct at time of going to print, but may also be changed without prior notice.Illustrations may show certain country specific executions and special equipment, and therefore may not be complete standard execution.
In the new workshop in Elsbethen near Salzburg more than 2500EPSILON timber and scrap cranes and STEPA farm, mobile and tractorcranes are produced.
Just in time production in a state-of-the-art workshop
Quality for the future
FEM-calculation for robust constructionwith optimal weight
Endurance test on modern test benches byfull capacity utilization
3-D construction of all components withthe latest CAD-system
0904_Epsilon 24.05.2005 10:57 Uhr Seite 32