ARIF & BINTOAK consulting architects & engineers

1

PROJECT NO:- 1550

DOOR FACINGS

REF. DESCRIPTION SPECIFICATION

EP

PU Clear polyuthrene lacqured / stained finish to match engineer's sample.

PL 1mm thick plastic laminated sheet colour as per engineer's approval

PP Super durable Polyster Powder Coated Colour as per Engineer's Approval.

PT

SS Polished stainless steel.

SH 1PT-PT

SH 2PL-PT

SH 3PL-PL

SH 4PL-PU

SH 5 45mm flush door with wood veneer (WD-3) on both sides. PU-PU

SH 6

PU-PU

SH 7

PU-PU

SH 8

PU-AU

SH 9

PU-PU

NOTE CD : Propietory laminated cubicle door - by trespa or equal & approved.

Door Frame:

Architrave:

WD-1 : Oak WoodWD-2 : American Wallnut Veneer.WD-3 : Beech Wood. HM : Hollow Metal.AL : Aluminium.GL : Glass.

PROJECT:- PROPOSED MIXED USE BUILDING PLOT NO.317-1080,MANKHOOL - BUR DUBAI - DUBAI

2013.10.20 Rev. T0

3 coat factory applied epoxy spray paint system as/penguard primer and polyurethane top coat in RAL colour as per engineer's approval.

Sprayed on semigloss non yellowing luxury finish alkyd enamel paint system colour as per engineer's approval

45mm thick flushed doors with commercial ply on both side to receive sprayed on semigloss non yellowing luxury finish alkyd enamel paint(PT) system colour as / engineers approval.

45mm thick flushed door with plastic laminate sheet on one side, colour as per engineer's approval, and commercial ply on other side to receive sprayed on semigloss non yellowing luxury finish alkyd enamel paint system colour as / engineers approval.

45mm thick flushed door with plastic laminate sheet on both side colour as per engineer's approval.

45mm flush door with plastic laminate (wood Finish) on one side ( colour to engineer's approval) and wood veneer (WD-3) on other side.

Non fire rated solid cored door shutter to be made of 44mm thick solid core and on either surface of shutter to be cladded with 0.6mm thick american walnut veneer or equivalent 10mm thick beech wood lapping to be provided all around the shutter. Shutter shall be cpmpletely finished in American PU lacquered polish as per approved stain.

60min fire rated door shutter to be made up of 54mm thick FD-60 ( Fire rating core-HALSPAN - UK origon ) infill with 12mm thick solid beech wood lipping all around the shutter and both sides of the shutter to be finished with 0.6mm thick American Walnut Veneer & completely finished with PU lacquer to an approved stain.

45mm thick flushed door with plastic laminate on one side ( colour to engineer's approval) and 2mm thick superdurable powdercoated aluminium sheet on outside , bent on edges to form a rebated joint with the lippings(concealed fixing)

90min fire reted door shutter to be made up of 64mm thick FD-90 ( Fire rating core - HALSPAN - UK origin ) infill with 3mm thick solid beech wood lipping all around the shutter and both sides of the shutter to be finished with 0.mm thick American walnut veneer and completely finished with PU laquer to an approved stain.

Tobe made of solid beech wood of 45mm thick Considered jamb width for door types is as mentioned in drawings. Door frame shall be finished in PU lacquer polish as approved.

To be made up of solid beech wood of size 18 x 90mm ( with floor block shall be finished in PU lacquer polish as per approved stain.

ARIF & BINTOAK consulting architects & engineers

2

PROJECT NO:- 1550

DOOR FACINGS

REF. DESCRIPTION SPECIFICATION

PROJECT:- PROPOSED MIXED USE BUILDING PLOT NO.317-1080,MANKHOOL - BUR DUBAI - DUBAI

2013.10.20 Rev. T0

ARIF & BINTOAK consulting architects & engineers 3

INTERNAL FINISHES

GENERAL NOTES FOR DOORS

REF. DESCRIPTION

01

02

03

04

05

06

07

08

09

10

11

12

13

14

15 The contractor shall verify all dimensions at site prior to fabrication of doors and frames.

16

17

18

PROJECT:- PROPOSED MIXED USE BUILDING PLOT NO.317-1080,MANKHOOL - BUR DUBAI - DUBAI PROJECT NO:- 1550

All quantities of doors , wardrobes & kitchen cabinets shall be re-measurable on completion and final price be adjusted accordingly.The solid beech wood used fro the door frames and the architraves should be free from knots and any defects and should be of the first choice, and the country of origin of the beech wood to be mentioned.The American walnut veneer shall be crown cut and should be free from the knots and any other defects and should be of the first choice and the country of origin of the American walnut veneer to be mentioned.

The samples of the solid wood and the veneer sheets with consultants and owners approval to be kept as reference till completion of the project.

Different pattern for the solid beech wood architrave 18mm x 90mm to be arranged fro review comments and approvals and fabrication to be stated after verifying site measurements.

Complete shop drawing s fro the deferent types of doors kitchen cabinets and wardrobes to be prepared along with the sample board of iron mongery fro consultant and owners review, comments and approvals and fabrication to be stated after verifying site measurements.

The PVC ebony foil semi glossy matching with the glossy sample provided by you shall be the German origin and to the approval of the owners and the consultant.

The hinges and the drawers channels fro the kitchen cabinets and the wardrobes shall be stainless steel BLUM, Astrian Origin.

The handles shall be 125mm stainless steel finish Hettich / European / Italian origin, sample needed fro approval.

The unit price for the kitchen base on and the wall units to be provided which will be applicable incase of any variance in quantities against BOQ.Rubber seal shall be provided for all fire rated doors as well as non fire rated doors.

The fire rating cores shall be from Halspan / UK origin.

The MDF used fro kitchen cabinets and wardrobes shall be low formal-dehyde that is with allowable gas emission.

Specify the make and country of origin of the Hardware and accessories like hanger oval bars etc.

All timber door frames shall have 18mm thick marine ply board subframes unless noted otherwise.

All door shutters with 'pl' finish shall have 1 mm thick plastic laminate sheet colour to match wall tiles / engineer's sample.

All doors shutter with "pt" finish shall have sprayed paint finish using lead free semigloss non yellowing luxury finish alkyd enamel paint with volume solids 43 % as per iso3233/1988(e) to match engineer's samples.

ARIF & BINTOAK consulting architects & engineers 4

INTERNAL FINISHES

GENERAL NOTES FOR DOORS

REF. DESCRIPTION

PROJECT:- PROPOSED MIXED USE BUILDING PLOT NO.317-1080,MANKHOOL - BUR DUBAI - DUBAI PROJECT NO:- 1550

19

20

21

22 All fire rated doors shall be to authority approval and necessary certificates to be provided.

All fire rated doors construction shall comply to relevant international standards and shall have intumescent strip all around.

The contractor shall also obtain approval from civil defence for fire rated doors and submit fire rating certificate in accordance to international standards for engineer's approval.

The contractor shall co-ordinate with hardware supplier. the contractor shall include in his price for installation and co-ordination of hardware.