03−ACTUATORS Spring Brake Models -...
Transcript of 03−ACTUATORS Spring Brake Models -...
LIFE SEAL MODELS
SEALED COMBINATION (LC) SEALED PIGGYBACK (LP)
FEATURES:
Emergency Spring Chamber is completely sealed• Integral Caging Tool• Guided Pressure Plate/Compression Spring Design• Zinc Plated Spring Chamber − permanently attachedfor safety
•
6−Year 1 Million Mile Warranty•
MODEL PART NUMBERS MODEL PART NUMBERSLC2430LC2430L
LC3030LC3030L
LP2430LP2430L
LP3030LP3030L
GOLD SEAL MODELS
SEALED COMBINATION (GC) SEALED PIGGYBACK (GP)
FEATURES:
Fully Threaded Push Rod• Orange Alert Stroke Indicator• Piloting Diaphragm• Piloting Dust Shield• Epoxy Powder Coated Spring & Housing• Zinc Plated Spring Chamber − permanently attached forsafety
•
4−Year Unlimited Mileage Warranty•
MODEL PART NUMBERS MODEL PART NUMBERSGC2024GC2424GC2424LGC2430
GC2430LGC2430XLGC3030GC3030L
GC3036GC3036LGC3636
GP1624GP2024GP2424GP2424L
GP2430GP2430LGP2430XLGP3030
GP3030LGP3036GP3036LGP3636
LIFE SEAL AND GOLD SEAL MODEL STROKE LENGTHS
LIFE SEAL MODELS GOLD SEAL MODELSPART NUMBERS STROKE (in) STROKE (mm) PART NUMBERS STROKE (in) STROKE (mm)LC2430LC2430LLC3030LC3030L
2.50 in3.00 in2.50 in3.00 in
64 mm76 mm64 mm76 mm
GP1624GC2024GC2424GC2424LGC2430GC2430LGC2430LXGC3030GC3030LGC3036GC3036LGC3636
2.25 in2.25 in2.25 in2.50 in2.25 in2.50 in3.00 in2.50 in3.00 in2.50 in3.00 in3.00 in
57 mm57 mm57 mm64 mm57 mm64 mm76 mm64 mm76 mm64 mm76 mm76 mm
03−ACTUATORS Spring Brake Models
03 − 8
CLAMP MODELSCLAMP COMBINATION (C) CLAMP PIGGYBACK (P) CLAMP SERVICE (S)
FEATURES:
− Fully Threaded Push Rod− Orange Alert Stroke Indicator− Piloting Dust Shield− Piloting Diaphragm− Epoxy Powder Coated Spring, Housing & Spring Chamber− Welded Safety Hooks− 2 Year Unlimited Mileage Warranty
MODEL PART NUMBERSCC2024 CC2424 CC2430 CC3030
FEATURES:
− Epoxy Powder Coated Spring & Spring Chamber− Piloting Diaphragm− Welded Safety Hooks− 2 Year Unlimited Mileage Warranty
MODEL PART NUMBERSCP1624 CP2024 CP2424CP2430 CP3030
FEATURES:
− Fully Threaded Push Rod− Orange Alert Stroke Indicator− Piloting Dust Shield− 3 Year Unlimited Mileage Warranty
MODEL PART NUMBERSSC9 SC12 SC16 SC16LSC20 SC20L SC24 SC24LSC24XL SC30 SC30L SC36
WEDGE MODELSCLAMP COMBINATION (SB) CLAMP PIGGYBACK (PB) CLAMP SERVICE CHAMBER (SD)
FEATURES:
− Available in Multiple Tube Lengths for Bendix or Rockwell Wedge Brakes− Epoxy Powder Coated Spring− Corrosion Resistant A−360 Aluminum− Safety Hooks on Spring Chamber− 2 Year Unlimited Mileage Warranty
MODEL PART NUMBERS0912SB 0916SB 1212SB 1216SB
FEATURES:
− Epoxy Powder Coated Spring− Corrosion Resistant A−360 Aluminum− Safety Hooks on Spring Chamber− 2 Year Unlimited Mileage Warranty
MODEL PART NUMBERS0912PB 0916PB 1212PB 1216PB
FEATURES:
− Available in Multiple Tube Lengths for Bendix or Rockwell Wedge Brakes− Zinc Plated Epoxy Powder Coat and Aluminum A−360 Corrosion Protection− 2 Year Unlimited Mileage Warranty
MODEL PART NUMBERS09SD 12SD
SERVICE AND WEDGE BRAKE MODEL STROKE LENGTHS
SERVICE BRAKE MODELS WEDGE BRAKE MODELSPART NUMBERS STROKE (in) STROKE (mm) PART NUMBERS STROKE (in) STROKE (mm)SC9SC12SC16SC16LSC20SC20LSC24SC24LSC24XLSC30SC30LSC36
1.75 in1.75 in2.25 in2.50 in2.25 in2.50 in2.25 in2.50 in3.00 in2.50 in3.00 in3.00 in
44 mm44 mm57 mm64 mm57 mm64 mm57 mm64 mm76 mm64 mm76 mm76 mm
09SD12SD0912SB0916SB1212SB1216SB
1.75 in1.75 in1.75 in1.75 in1.75 in1.75 in
44 mm44 mm44 mm44 mm44 mm44 mm
Clamp and Wedge Brake Models 03−ACTUATORS
03 − 9
How to Identify Haldex Anchorlok Spring Brakes
SPRING BRAKES
LC = Life Seal Combination Spring Brake
LP = Life Seal Piggyback
L = Long Stroke − 3.0" Stroke
GC = Gold Seal Combination Spring Brake
GP = Gold Seal Piggyback
L = Long Stroke
XL = Extra Long Stroke
HO = High Output
CC = Clamp Combination Spring Brake
CP = Clamp Piggyback
03−ACTUATORS Identify Spring Brakes
03 − 10
SERVICE BRAKES
S = Clamp Service Brake
L = Long Stroke
XL = Extra Long Stroke
R = Remote Mount
WEDGE CLAMPBRAKES
SB = Wedge Clamp Combination Spring Brakes
PB = Wedge Clamp Piggyback
WEDGESERVICEBRAKES
SD = Wedge Clamp Service Chamber
WEDGE BRAKETUBE LENGTHMEASUREMENT
NOMENCLATURE TABLEPrefix Suffix
SC Service ChamberCC Clamp Style CombinationCP Clamp Style PiggybackMC Midland CombinationMP Midland PiggybackGC Gold Seal Combination
GP Gold Seal PiggybackLC Life Seal CombinationLP Life Seal Piggyback
K Piggyback KitL Long StrokeXL Extra Long StrokeCS Clevis, StampedCF Clevis, ForgedCW Clevis, WeldedHD Heavy DutyHO High Output
XHD Extra Heavy DutyQ 3/4" Push RodPxx Package xx SizeA Cold Weather, ArcticB Dust Boot or BulkM MetricN Neoprene, Diaphragm
Identify Spring Brakes 03−ACTUATORS
03 − 11
S−CAM / AIR DISC BRAKES
OPTION CODE DEFINITIIONS:
1. This is the desired style (refer to Spring Brake Models page for descriptions). This information isrequired. The example is a Life Seal combination unit.This is the size of the unit in square inches of effective area. Two (2) digits are used for a service onlychamber. Four (4) digits are used for combination service and emergency units. This information isrequired. In this example 24 is the service side square inch area and 30 is the emergency side.
2.
This feature is optional where indicated. Please refer to the Technical Data Section for furtherinformation on Long Stroke (L) or Extra Long Stroke (XL) units.
3.
Optional feature, HD designates Heavy Duty Return Spring and/or Heavy Duty Housing Assembly.Not applicable on GP and P units.
4.
Optional feature, HO designates High Output main compression spring.5. "M" denotes Metric push rod, mounting studs and air inlet port threads; all of which are M16 x 1.5 −6g. Spring brakes may have a combination of both standard and metric threads.
6.
03−ACTUATORS How to Order S−Cam & Air Disc Brakes
03 − 12
How to Order Wedge Brakes 03−ACTUATORS
03 − 13
Gold Seal Combination Spring Brakes
Stud Spacing (G): 4.75" − 121 mmStud Type: 5/8 x 11 UNC Grade 5
Stud Length: 1.50" − 38mmPush Rod Thread: 5/8 x 18 UNFAir Port Threads: 3/8 x 18 NPTF
Features:
Fully Threaded Push Rod•
Orange Alert Stroke Indicator•
Piloting Diaphragm•
Piloting Dust Shield with Sealed Combination•
Epoxy Powder Coated Spring•
Epoxy Powder Coated Housing with Sealed Combination•
Zinc Plated Spring Chamber − permanently attached for safety•
Specifications:
A − Length of the Chamber from face of the Stud Housing to the endof Spring Housing.
B − Length of Piggyback center body to end of Spring Housing.C − Dimension at Spring Housing.D − Dimension at Rolled Seal.E − Dimension at Service Clamp Band.F − Dimension of Service Diaphragm.G − Stud spacing.J − Face of the Stud Housing to the tip of the Service Push Rod.K − Face of the Stud Housing to the center of the main Clevis Pin.SI− 0° Service Clamp Angle.T − 90° Port Angle.
Notes:
1) Angles are measured counter−clockwise with thestuds in the vertical position and viewed from thespring housing.
2) **GC3030S1 SI = 330° Service .
SKU# ProductDescription
Avail.Stroke
A B C D E F J K Wt.(each)
Qty.perPkg.
GC2024 Combination −Size 2024
2.25"57mm
8.5"216mm
6.3"160mm
5.9"150mm
7.5"191mm
8.9"226mm
6.5"165mm
9.68" − 17.0 lbs.7.7 kg.
2
GC2424 Combination −Size 2424
2.25"57mm
8.5"216mm
6.3"160mm
5.9"150mm
7.5"191mm
9.6"244mm
7.1"180mm
9.65" − 17.5 lbs.7.9 kg.
2
GC2424L Combination −Long Stroke −Size 2424
2.50"64mm
8.9"226mm
5.4"137mm
5.4"137mm
7.4"188mm
9.2"234mm
7.1"180mm
9.50" − 18.0 lbs.8.2 kg.
2
GC2424LP40 Combination −Long Stroke −Size 2424
2.50"64mm
8.9"226mm
5.4"137mm
5.4"137mm
7.4"188mm
9.2"234mm
7.1"180mm
9.50" − 18.0 lbs.8.2 kg.
40
GC2430 Combination −Size 2430
2.25"57mm
9.0"229mm
6.7"170mm
6.3"160mm
8.4"213mm
9.3"236mm
7.1"180mm
− − 18.7 lbs.8.5 kg.
2
GC2430L Combination −Long Stroke −Size 2430
2.50"64mm
9.0"229mm
6.7"170mm
6.3"160mm
8.4"213mm
9.3"236mm
7.1"180mm
9.50" − 19.9 lbs.9.0 kg.
2
GC2430XL Combination −Extra LongStroke − Size2430
3.00"76mm
9.6"244mm
7.8"198mm
6.6"168mm
8.3"211mm
9.4"239mm
7.1"180mm
8.60" − 21.9 lbs.9.9 kg.
1
GC3030 Combination −Size 3030
2.50"64mm
9.0"229mm
6.7"170mm
6.3"160mm
8.3"211mm
9.2"234mm
7.8"198mm
10.00" − 19.6 lbs.8.9 kg.
2
03−ACTUATORS Gold Seal Combination Spring Brakes
03 − 14
GC3030CF Combinationwith ForgedClevis − Size30/30
2.50"64mm
9.0"229mm
6.7"170mm
6.3"160mm
8.3"211mm
9.2"234mm
7.8"198mm
10.00" 11.25" 20.6 lbs.9.3 kg.
1
GC3030CFB Combinationwith ForgedClevis & PushRod Dust Boot −Size 30/30
2.50"64mm
9.0"229mm
6.7"170mm
6.3"160mm
8.3"211mm
9.2"234mm
7.8"198mm
10.00" 11.25" − 1
GC3030CFP40 Combinationwith ForgedClevis − Size3030 − Bulk
2.50"64mm
9.0"229mm
6.7"170mm
6.3"160mm
8.3"211mm
9.2"234mm
7.8"198mm
10.00" 11.25" 20.6 lbs.9.3 kg.
40
GC3030L Combination −Long Stroke −Size 3030
3.00"76mm
9.5"241mm
7.2"183mm
6.3"160mm
8.3"211mm
10.2"259mm
7.8"198mm
10.00" − 19.6 lbs.8.9 kg.
2
GC3030LP40 Combination −Long Stroke −Size 3030 −Bulk
3.00"76mm
10.3"261mm
7.7"196mm
6.3"160mm
8.3"211mm
10.1"257mm
7.8"198mm
10.00" − 19.6 lbs.8.9 kg.
40
GC3030LR Combination −Long Stroke −Size 3030
3.00"76mm
9.5"241mm
7.2"183mm
6.3"160mm
8.3"211mm
10.2"259mm
7.8"198mm
14.00" − 19.8 lbs.9.0 kg.
1
GC3030P40 Combination −Size 3030 −Bulk
2.50"64mm
9.0"229mm
6.7"170mm
6.3"160mm
8.3"211mm
9.2"234mm
7.8"198mm
10.00" − 19.6 lbs.8.9 kg.
40
GC3030R Combination −Size 3030
2.50"64mm
9.0"229mm
6.7"170mm
6.3"160mm
8.3"211mm
9.2"234mm
7.8"198mm
14.00" − 19.8 lbs.9.0 kg.
1
GC3030RCF Combinationwith ForgedClevis − Size3030
2.50"64mm
9.0"229mm
6.7"170mm
6.3"160mm
8.3"211mm
9.2"234mm
7.8"198mm
14.00" 15.20" 19.8 lbs.9.0 kg.
1
GC3030S1 Combinationwith Clevis &Boot − Size3030 − **SeeNotes
2.50"64mm
9.0"229mm
6.7"170mm
6.3"160mm
8.3"211mm
9.2"234mm
7.8"198mm
1.8" 3.0" − 1
GC3036 Combination −Size 3036
2.50"64mm
9.6"244mm
7.3"185mm
7.2"183mm
9.2"234mm
9.7"246mm
7.8"198mm
9.44" − 26.0 lbs.11.8 kg.
2
GC3036L Combination −Long Stroke −Size 3036
3.00"76mm
10.4"264mm
8.0"203mm
7.2"183mm
9.4"239mm
11.2"284mm
8.7"221mm
10.00" − 26.0 lbs.11.8 kg.
2
GC3636 Combination −Size 3636
3.00"76mm
10.4"264mm
8.0"203mm
7.2"183mm
9.4"239mm
11.2"284mm
8.7"221mm
9.00" − 26.0 lbs.11.8 kg.
2
GC3636P40 Combination −Size 3636 −Bulk
3.00"76mm
10.4"264mm
8.0"203mm
7.2"183mm
9.4"239mm
11.2"284mm
8.7"221mm
9.00" − 26.0 lbs.11.8 kg.
40
GC3636Q Combinationwith 3/4" PushRod − Size3636
3.00"76mm
10.4"264mm
8.0"203mm
7.2"183mm
9.4"239mm
11.2"284mm
8.7"221mm
9.00" − 29.0 lbs.13.1 kg.
1
Gold Seal Combination Spring Brakes 03−ACTUATORS
03 − 15
Gold Seal Piggyback Spring Brakes
Air Port Treads: 3/8" x 18 NPTF
Features:
Piloting Diaphragm•
Epoxy Powder Coated Spring•
Zinc Plated Spring Chamber − permanently attached for safety•
Specifications:
B − Length of Piggyback center body to end of Spring Housing.C − Dimension at Spring Housing.D − Dimension at Rolled Seal.E − Dimension at Service Clamp Band.F − Dimension of Service Diaphragm.
SKU# Product Description Avail.Stroke
B C D E F Wt.(each)
Qty.per
Pack
GP1624 Piggyback − Size 1624 2.25"57mm
6.3"160mm
5.9"150mm
7.5"191mm
− − 10.0 lbs.4.5 kg.
2
GP2024 Piggyback − Size 2024 2.25"57mm
6.3"160mm
5.9"150mm
7.5"191mm
− − 10.3 lbs.4.7 kg.
2
GP2424 Piggyback − Size 2424 2.25"57mm
6.3"160mm
5.9"150mm
7.5"191mm
− − 10.5 lbs.4.8 kg.
2
GP2424L Piggyback − Long Stroke −Size 2424
2.50"64mm
5.4"137mm
5.4"137mm
7.4"188mm
− − 11.0 lbs.5.0 kg.
2
GP2430 Piggyback − Size 2430 2.25"57mm
6.7"170mm
6.3"160mm
8.4"213mm
− − 11.5 lbs.5.2 kg.
2
GP2430L Piggyback − Long Stroke −Size 2430
2.50"64mm
6.7"170mm
6.3"160mm
8.4"213mm
− − 12.1 lbs.5.5 kg.
2
GP2430XL Piggyback − Extra Long Stroke− Size 2430
3.00"76mm
7.8"198mm
6.6"168mm
8.3"211mm
− − 18.9 lbs.8.6 kg.
1
GP3030 Piggyback − Size 3030 2.50"64mm
6.7"170mm
6.3"160mm
8.3"211mm
− − 11.8 lbs.5.4 kg.
2
GP3030K Piggyback Kit − Size 3030 2.50"64mm
6.7"170mm
6.3"160mm
8.3"211mm
10.2"259mm
7.8"198mm
11.8 lbs.5.4 kg.
1
GP3030KP40 Piggyback Kit − Size 3030 −Bulk
2.50"64mm
6.7"170mm
6.3"160mm
8.3"211mm
10.2"259mm
7.8"198mm
11.8 lbs.5.4 kg.
40
GP3030L Piggyback − Long Stroke −Size 3030
3.00"76mm
7.2"183mm
6.3"160mm
8.3"211mm
− − 12.3 lbs.5.6 kg.
2
GP3030LK Piggyback Kit − Long Stroke −Size 3030
3.00"76mm
7.2"183mm
6.3"160mm
8.3"211mm
10.2"259mm
7.8"198mm
− 1
GP3030LKP40 Piggyback Kit − Long Stroke −Size 3030 − Bulk
3.00"76mm
7.2"183mm
6.3"160mm
8.3"211mm
10.2"259mm
7.8"198mm
12.3 lbs.5.6 kg.
40
GP3030LP40 Piggyback − Long Stroke −Size 3030 − Bulk
3.00"76mm
7.2"183mm
6.3"160mm
8.3"211mm
− − 12.3 lbs.5.6 kg.
40
GP3030P40 Piggyback − Size 3030 − Bulk 2.50"64mm
6.7"170mm
6.3"160mm
8.3"211mm
− − 11.8 lbs.5.4 kg.
40
GP3036 Piggyback − Size 3036 2.50"64mm
7.3"185mm
7.2"183mm
9.2"234mm
− − 15.7 lbs.7.1 kg.
2
GP3636 Piggyback − Size 3636 3.00"76mm
8.0"203mm
7.2"183mm
9.4"239mm
− − 16.4 lbs.7.4 kg.
2
03−ACTUATORS Gold Seal Piggyback Spring Brakes
03 − 16
Life Seal Combination Spring Brakes
Stud Spacing (G): 4.75" − 121 mmStud Type: 5/8 x 11 UNC Grade 5
Stud Length: 1.50" − 38mmPush Rod Thread: 5/8 x 18 UNFAir Port Threads: 3/8 x 18 NPTF
Features:
Emergency Spring Chamber is completely sealed•
Integral Caging Tool•
Guided Pressure Plate/Compression Spring Design•
Zinc Plated Spring Chamber − permanently attached for safety•
Specifications:
A − Length of the Chamber from face of the Stud Housing to theend of Spring Housing.
B − Length of Piggyback center body to end of Spring Housing.C − Dimension at Spring Housing.D − Dimension at Rolled Seal.E − Dimension at Service Clamp Band.F − Dimension of Service Diaphragm.G − Stud spacing.J − Face of the Stud Housing to the tip of the Service Push Rod.K − Face of the Stud Housing to the center of the main Clevis Pin.SI− 0° Service Clamp Angle.T − 90° Port Angle.
Notes:
1) Angles are measured counter−clockwise with the studs in thevertical position and viewed from the spring housing.
SKU# ProductDescription
Avail.Stroke
A B C D E F J Wt.(each)
Qty.perPkg.
LC2430 Combination − Size2430
2.50"64mm
9.6"244mm
7.2"183mm
6.6"168mm
8.3"211mm
9.2"234mm
7.1"180mm
9.50" 19.5 lbs.8.8 kg.
1
LC2430L Combination − LongStroke − Size 2430
3.00"76mm
9.8"249mm
7.4"188mm
6.6"168mm
8.3"211mm
9.2"234mm
7.1"180mm
8.62" 20.9 lbs.9.5 kg.
1
LC3030 Combination − Size3030
2.50"64mm
8.9"226mm
6.7"170mm
6.6"168mm
8.3"211mm
9.2"234mm
7.8"198mm
10.00" 20.7 lbs.9.4 kg.
1
LC3030L Combination − LongStroke − Size 3030
3.00"76mm
9.8"249mm
7.2"183mm
6.6"168mm
8.3"211mm
9.2"234mm
7.8"198mm
10.00" 21.7 lbs.9.8 kg.
1
LC3030LP40 Combination − LongStroke − Size 3030 −Bulk
3.00"76mm
9.8"249mm
7.2"183mm
6.6"168mm
8.3"211mm
9.2"234mm
7.8"198mm
10.00" 21.7 lbs.9.8 kg.
40
LC3030LR Combination − LongStroke − Size 3030
3.00"76mm
9.8"249mm
7.2"183mm
6.6"168mm
8.3"211mm
9.2"234mm
7.8"198mm
14.00" 21.9 lbs.9.8 kg.
1
LC3030P40 Combination − Size3030 − Bulk
2.50"64mm
8.9"226mm
6.7"170mm
6.6"168mm
8.3"211mm
9.2"234mm
7.8"198mm
10.00" 20.7 lbs.9.4 kg.
40
LC3030R Combination − Size3030
2.50"64mm
8.9"226mm
6.7"170mm
6.6"168mm
8.3"211mm
9.2"234mm
7.8"198mm
14.00" 20.9 lbs.9.5 kg.
1
Life Seal Combination Spring Brakes 03−ACTUATORS
03 − 17
Life Seal Piggyback Spring Brakes
Air Port Threads: 3/8 x 18 NPTF
Features:
Emergency Spring Chamber is completely sealed•
Integral Caging Tool•
Guided Pressure Plate/Compression Spring Design•
Zinc Plated Spring Chamber − permanently attached for safety•
Specifications:
B − Length of Piggyback center body to end of Spring Housing.C − Dimension at Spring Housing.D − Dimension at Rolled Seal.E − Dimension at Service Clamp Band.F − Dimension of Service Diaphragm.
Notes:
1) Angles are measured counter−clockwise with the studs in thevertical position and viewed from the spring housing.
SKU# Product Description Avail.Stroke
B C D E F Wt.(each)
Qty.per
Pack
LP2430 Piggyback − Size 2430 2.50"64mm
7.2"183mm
6.6"168mm
8.3"211mm
− − 12.1 lbs.5.5 kg.
1
LP2430L Piggyback Long Stroke − Size2430
3.00"76mm
7.4"188mm
6.6"168mm
8.3"211mm
− − 12.5 lbs.5.7 kg.
1
LP3030 Piggyback − Size 3030 2.50"64mm
6.7"170mm
6.6"168mm
8.3"211mm
− − 12.9 lbs.5.9 kg.
1
LP3030K Piggyback Kit − Size 3030 2.50"64mm
6.7"170mm
6.6"168mm
8.3"211mm
9.2"234mm
7.8"198mm
12.9 lbs.5.9 kg.
1
LP3030KP40 Piggyback Kit − Size 3030 −Bulk
2.50"64mm
6.7"170mm
6.6"168mm
8.3"211mm
9.2"234mm
7.8"198mm
12.9 lbs.5.9 kg.
40
LP3030L Piggyback − Long Stroke −Size 3030
3.00"76mm
7.2"183mm
6.6"168mm
8.3"211mm
− − 13.1 lbs.5.9 kg.
1
LP3030LK Piggyback Kit − Long Stroke −Size 3030
3.00"76mm
7.2"183mm
6.6"168mm
8.3"211mm
9.2"234mm
7.8"198mm
13.1 lbs.5.9 kg.
1
LP3030LKP40 Piggyback Kit − Long Stroke −Size 3030 − Bulk
3.00"76mm
7.2"183mm
6.6"168mm
8.3"211mm
9.2"234mm
7.8"198mm
13.1 lbs.5.9 kg.
40
LP3030P40 Piggyback − Size 3030 − Bulk 2.50"64mm
6.7"170mm
6.6"168mm
8.3"211mm
− − 12.9 lbs.5.9 kg.
40
03−ACTUATORS Life Seal Piggyback Spring Brakes
03 − 18
Service Chamber Brakes
See Notes for Stud, Pushrod and AirPort Measurements.
Features:
Fully Threaded Push Rod•
Orange Alert Stroke Indicator•
Piloting Dust Shield•
Specifications:
A − Length of the Chamber from face of the Stud Housing to theend of Spring Housing.
C − Dimension at Spring Housing.E − Dimension at Service Clamp Band.F − Dimension of Service Diaphragm.G − Stud spacing.J − Face of the Stud Housing to the tip of the Service Push Rod.SI− Service Clamp Angle.T − Port Angle.
Notes:
1) Type 9, 12, and 16 with 2.25" StrokeStud Spacing (G): 3.00" − 76 mmStud Type: 7/16 x 14 UNC Grade 5Stud Length: 1.12" − 28 mmPush Rod Thread: 1/2 x 20 UNFAir Port Threads: 3/8 x 18 NPTF
2) All OthersStud Spacing(G): 4.75" − 121 mmStud Type: 5/8 x 11 UNC Grade 5Stud Length: 1.50" − 38 mmPush Rod Thread: 5/8 x 18 UNFAir Port Threads: 3/8 x 18 NPTF
3) Angles are measured counter−clockwise withthe studs in the vertical position and viewedfrom the pressure housing.
SKU# Product Description Avail.Stroke
A C E F J T SI Wt.(each)
Qty.perPkg.
SC09 Service Chamber − SizeT09
1.75"44mm
4.4"112mm
4.0"102mm
5.6"142mm
5.12"130mm
10.43" 0° 135° 4.4 lbs.2.0 kg.
2
SC12 Service Chamber − SizeT12
1.75"44mm
3.7"94mm
4.0"102mm
7.7"196mm
5.47"140mm
10.41" 90° 45° 5.2 lbs.2.4 kg.
2
SC16 Service Chamber − SizeT16
2.25"57mm
4.6"117mm
4.6"117mm
8.3"211mm
6.2"157mm
9.52" 90° 45° 5.7 lbs.2.6 kg.
2
SC16L Service Chamber − LongStroke − Size T16
2.50"64mm
4.7"119mm
6.5"165mm
6.5"165mm
6.3"160mm
10.00" 0° 0° 6.8 lbs.3.1 kg.
1
SC20 Service Chamber − SizeT20
2.25"57mm
4.0"102mm
7.0"178mm
8.9"226mm
6.5"165mm
10.15" 90° 45° 8.0 lbs.3.6 kg.
2
SC20L Service Chamber − LongStroke − Size T20
2.50"64mm
4.7"119mm
6.9"175mm
6.9"175mm
6.6"168mm
10.00" 0° 0° 7.0 lbs.3.2 kg.
1
SC24 Service Chamber − SizeT24
2.25"57mm
4.3"109mm
7.5"191mm
9.3"236mm
7.1"180mm
10.23" 90° 45° 8.5 lbs.3.9 kg.
2
SC24L Service Chamber − LongStroke − Size T24
2.50"64mm
4.4"112mm
7.5"191mm
9.3"236mm
7.1"180mm
9.47" 90° 45° 8.5 lbs.3.9 kg.
2
SC24XL Service Chamber − ExtraLong Stroke − Size T24
3.00"76mm
4.7"119mm
7.4"188mm
7.4"188mm
7.0"178mm
10.00" 0° 0° 9.1 lbs.4.1 kg.
1
Service Chamber Brakes 03−ACTUATORS
03 − 19
SC30 Service Chamber − SizeT30
2.50"64mm
4.2"107mm
8.2"208mm
9.3"236mm
7.8"198mm
10.34" 90° 0° 9.5 lbs.4.3 kg.
2
SC30L Service Chamber − SizeT30
3.00"76mm
4.1"104mm
8.2"208mm
9.8"249mm
7.8"198mm
10.00" 0° 0° 8.7 lbs.3.9 kg.
1
SC36 Service Chamber − SizeT36
3.00"76mm
4.8"122mm
9.3"236mm
10.8"274mm
8.7"221mm
8.00" 90° 0° 13.0 lbs.5.9 kg.
2
03−ACTUATORS Service Chamber Brakes
03 − 20
Clamp Style Combination & Piggyback
Stud Spacing (G): 4.75" − 121 mmStud Type: 5/8 x 11 UNC Grade 5
Stud Length: 1.50" − 38 mmPush Rod Thread: 5/8 x 11 UNFAir Port Threads: 3/8 x 18 NPTF
Features:
Piloting Diaphragm•
Piloting Dust Shield•
Welded Safety Hooks•
Fully Threaded Push Rod•
Orange Alert Stroke Indicator•
Epoxy Powder Coated Spring, Housing and Spring Chamber•
Specifications:
A − Length of the Chamber from face of the Stud Housing to theend of Spring Housing.
B − Length of Piggyback center body to end of Spring Housing.C − Dimension at Spring Housing.E − Dimension at Service Clamp Band.F − Dimension of Service Diaphragm.G − Stud spacing.J − Face of the Stud Housing to the tip of the Service Push Rod.SI− 0° Service Clamp Angle.T − 90° Port Angle.
Notes:
1) Angles are measured counter−clockwise with the studs in thevertical position and viewed from the spring housing.
SKU# ProductDescription
AvailableStroke
A B C E F J WeightEach
Quantity perPack
CC3030 Combination − Size3030
2.50"64mm
8.9"226mm
6.8"173mm
6.3"160mm
10.2"259mm
7.9"201mm
9.44" 20.9 lbs.9.5 kg.
2
CP3030 Piggyback − Size3030
2.50"64mm
− 6.8"173mm
6.3"160mm
10.2"259mm
− − 13.2 lbs.6.0 kg.
2
Clamp Style Combination & Piggyback 03−ACTUATORS
03 − 21
Midland Style Combination/Piggyback Brakes
Stud Spacing (G): 4.75" − 121 mmStud Type: 5/8 x 11 UNC Grade 5
Stud Length: 1.50" − 38 mmPush Rod Thread: 5/8 x 18 UNFAir Port Threads: 3/8 x 18 NPTF
Features:
Includes 1/2" Acme Thread Caging Tool• Epoxy Powder Coated Spring Chamber and Main Power Springwith Combination and Piggyback
•
Epoxy Powder Coated Service Housing with Combination•
Zinc Plated Push Rod, Mounting Studs and Caging Tool•
Sealed Spring Chamber•
Aluminum A360 Center Body•
Specifications:
A − Length of the Chamber from face of the Stud Housing to theend of Spring Housing.
B − Length of Piggyback center body to end of Spring Housing.C − Dimension at Spring Housing.D − Dimension at Rolled Seal.E − Dimension at Service Clamp Band.F − Dimension of Service Diaphragm.G − Stud spacing.J − Face of the Stud Housing to the tip of the Service Push Rod.K − Face of the Stud Housing to the center of the main Clevis Pin.SI− 0° Service Clamp Angle.T − 90° Port Angle.
Notes:
1) Angles are measured counter−clockwise with the studs in thevertical position and viewed from the spring housing.
SKU# ProductDescription
Avail.Stroke
A B C D E F J K Wt.(each)
Qty.perPkg.
OEMNumber
MC3030B MidlandCombination −Model Size/Type3030 Completewithout Clevis −Bulk
2.50 inch64 mm
9.0inch
−229mm
6.7inch
−170mm
6.3inch
−160mm
8.3inch
−211mm
9.2inch
−234mm
7.8inch
−198mm
9.36inch
− 19.6 lbs.8.9 kg.
45 126 3030102
MC3030CSB MidlandCombination −Model Size/Type3030 with Clevis,Stamped − Bulk
2.50 inch64 mm
9.0inch
−229mm
6.7inch
−170mm
6.3inch
−160mm
8.3inch
−211mm
9.2inch
−234mm
7.8inch
−198mm
9.36inch
10.66inch
20.1 lbs.9.1 kg.
45 126 3030103
MP3030B MidlandPiggyback −Model Size/Type3030 − Bulk
2.50 inch64 mm
− 6.7inch
−170mm
6.3inch
−160mm
8.3inch
−211mm
− − − − 11.8 lbs.5.4 kg.
45 126 3030101
MP3030KB MidlandPiggyback Kit −Model Size/Type3030 − Bulk
2.50 inch64 mm
− 6.7inch
−170mm
6.3inch
−160mm
8.3inch
−211mm
− 7.8inch
−198mm
− − 11.8 lbs.5.4 kg.
45 126 3030104
03−ACTUATORS Midland Style Combination/Piggyback Brakes
03 − 22
T09 Wedge Service ChamberFeatures:
Zinc Plated•
Epoxy Powder Coat•
Aluminum A−360 Corrosion Protection•
Specifications:
A − Length of the Chamber from face of the Stud Housing to theend of Spring Housing.
C − Dimension at Spring Housing.D − Tube LengthE − Dimension at Service Clamp Band.F − Dimension of Service Diaphragm.
Notes:
1) Measure tube length from the end of the tube to the flat in thehousing.
SKU# ProductDescription
Design Avail.Stroke
A C D E F Wt.(each)
Qty. perPkg.
0900002 Wedge Size 09 Bendix 1.75"44mm
2.6"66mm
3.3"84mm
2.25" 7.0"178mm
5.0"127mm
3.0 lbs.1.4 kg.
2
0900003 Wedge Size 09 Rockwell 1.75"44mm
2.6"66mm
3.3"84mm
2.25" 7.0"178mm
5.0"127mm
3.0 lbs.1.4 kg.
2
0900004 Wedge Size 09 Bendix 1.75"44mm
2.6"66mm
3.3"84mm
3.00" 7.0"178mm
5.0"127mm
3.0 lbs.1.4 kg.
2
0900005 Wedge Size 09 Rockwell 1.75"44mm
2.6"66mm
3.3"84mm
3.00" 7.0"178mm
5.0"127mm
3.0 lbs.1.4 kg.
2
0900008 Wedge Size 09 Rockwell 1.75"44mm
2.6"66mm
3.3"84mm
3.50" 7.0"178mm
5.0"127mm
3.0 lbs.1.4 kg.
2
0900009 Wedge Size 09 Rockwell 1.75"44mm
2.6"66mm
3.3"84mm
9.38" 7.0"178mm
5.0"127mm
3.0 lbs.1.4 kg.
2
0900010 Wedge Size 09 Rockwell 1.75"44mm
2.6"66mm
3.3"84mm
4.00" 7.0"178mm
5.0"127mm
3.0 lbs.1.4 kg.
2
Wedge Brakes 03−ACTUATORS
03 − 23
T12 Wedge Service ChamberFeatures:
Zinc Plated•
Epoxy Powder Coat•
Aluminum A−360 Corrosion Protection•
Specifications:
A − Length of the Chamber from face of the Stud Housing to theend of Spring Housing.
C − Dimension at Spring Housing.D − Tube LengthE − Dimension at Service Clamp Band.F − Dimension of Service Diaphragm.
Notes:
1) Measure tube length from the end of the tube to the flat in thehousing.
SKU# ProductDescription
Design Avail.Stroke
A C D E F Wt. (each) Qty.perPkg.
1200004 Wedge Size 12 Bendix 1.75"44mm
2.6"66mm
4.0"102mm
2.25" 7.6"193mm
5.5"140mm
4.2 lbs.1.9 kg.
2
1200005 Wedge Size 12 Rockwell 1.75"44mm
2.6"66mm
4.0"102mm
2.25" 7.6"193mm
5.5"140mm
4.2 lbs.1.9 kg.
2
1200008 Wedge Size 12 Bendix 1.75"44mm
2.6"66mm
4.0"102mm
3.00" 7.6"193mm
5.5"140mm
4.2 lbs.1.9 kg.
2
1200009 Wedge Size 12 Rockwell 1.75"44mm
2.6"66mm
4.0"102mm
3.00" 7.6"193mm
5.5"140mm
4.2 lbs.1.9 kg.
2
1200012 Wedge Size 12 Rockwell 1.75"44mm
2.6"66mm
4.0"102mm
3.50" 7.6"193mm
5.5"140mm
4.2 lbs.1.9 kg.
2
1200014 Wedge Size 12 Rockwell 1.75"44mm
2.6"66mm
4.0"102mm
4.00" 7.6"193mm
5.5"140mm
4.2 lbs.1.9 kg.
2
1200020 Wedge Size 12 Rockwell 1.75"44mm
2.6"66mm
4.0"102mm
9.38" 7.6"193mm
5.5"140mm
4.2 lbs.1.9 kg.
2
03−ACTUATORS Wedge Brakes
03 − 24
Wedge Combination BrakesFeatures:
Epoxy Powder Coated Spring•
Safety Hooks on Spring Chamber•
Aluminum A−360 Corrosion Protection•
Specifications:
A − Length of the Chamber from face of the Stud Housing to theend of Spring Housing.
B − Length of Piggyback center body to end of Spring Housing.C − Dimension at Spring Housing.D − Tube LengthE − Dimension at Service Clamp Band.F*− Dimension of Service Diaphragm.
Notes:
1) F* The first dimension is for Service Side and the seconddimension is for the Emergency Side.
2) Measure tube length from the end of the tube to the flat inthe housing.
SKU# ProductDescription
Design Avail.Stroke
A B C D E F* Wt.(each)
Qty.perPkg.
0912005 WedgeCombination
Bendix 1.75"44mm
6.4"163mm
4.9"124mm
4.8"122mm
3.00" 7.8"198mm
5.1/5.5"130/140mm
13.0 lbs.5.9 kg.
2
0912006 WedgeCombination
Rockwell 1.75"44mm
6.4"163mm
4.9"124mm
4.8"122mm
3.00" 7.8"198mm
5.1/5.5"130/140mm
13.0 lbs.5.9 kg.
2
1212002 WedgeCombination
Bendix 1.75"44mm
6.3"160mm
5.0"127mm
4.8"122mm
2.25" 7.8"198mm
5.5"140mm
14.0 lbs.6.4 kg.
2
1212003 WedgeCombination
Rockwell 1.75"44mm
6.3"160mm
5.0"127mm
4.8"122mm
2.25" 7.8"198mm
5.5"140mm
14.0 lbs.6.4 kg.
2
1212006 WedgeCombination
Bendix 1.75"44mm
6.3"160mm
5.0"127mm
4.8"122mm
3.00" 7.8"198mm
5.5"140mm
14.0 lbs.6.4 kg.
2
1212007 WedgeCombination
Rockwell 1.75"44mm
6.3"160mm
5.0"127mm
4.8"122mm
3.00" 7.8"198mm
5.5"140mm
14.0 lbs.6.4 kg.
2
1212008 WedgeCombination
Rockwell 1.75"44mm
6.3"160mm
5.0"127mm
4.8"122mm
3.50" 7.8"198mm
5.5"140mm
14.0 lbs.6.4 kg.
2
1212010 WedgeCombination
Rockwell 1.75"44mm
6.3"160mm
5.0"127mm
4.8"122mm
4.00" 7.8"198mm
5.5"140mm
14.0 lbs.6.4 kg.
2
1216001 WedgeCombination
Rockwell 1.75"44mm
7.0"178mm
5.7"145mm
5.7"145mm
10.2" 8.4"213mm
5.5/6.1"140/155mm
17.0 lbs.7.7 kg.
2
1216003 WedgeCombination
Bendix 1.75"44mm
7.0"178mm
5.7"145mm
5.7"145mm
2.25" 8.4"213mm
5.5/6.1"140/155mm
17.0 lbs.7.7 kg.
2
1216004 WedgeCombination
Rockwell 1.75"44mm
7.0"178mm
5.7"145mm
5.7"145mm
2.25" 8.4"213mm
5.5/6.1"140/155mm
17.0 lbs.7.7 kg.
2
1216007 WedgeCombination
Rockwell 1.75"44mm
7.0"178mm
5.7"145mm
5.7"145mm
3.00" 8.4"213mm
5.5/6.1"140/155mm
17.0 lbs.7.7 kg.
2
1216008 WedgeCombination
Rockwell 1.75"44mm
7.0"178mm
5.7"145mm
5.7"145mm
3.50" 8.4"213mm
5.5/6.1"140/155mm
17.0 lbs.7.7 kg.
2
1216011 WedgeCombination
Rockwell 1.75"44mm
7.0"178mm
5.7"145mm
5.7"145mm
9.38" 8.4"213mm
5.5/6.1"140/155mm
17.0 lbs.7.7 kg.
2
Wedge Brakes 03−ACTUATORS
03 − 25
Wedge Piggyback BrakesFeatures:
Epoxy Powder Coated Spring•
Safety Hooks on Spring Chamber•
Corrosion Resistant A−360 Aluminum•
Specifications:
B − Length of Piggyback center body to end of SpringHousing.
C − Dimension at Spring Housing.E − Dimension at Service Clamp Band.
SKU# Product Description Avail. Stroke B C E Weight (each) Qty. per Pkg.
0912001 Piggyback Size 0912 1.75"44mm
4.9"124mm
4.8"122mm
7.8"198mm
5.9 lbs.2.7 kg.
2
0916001 Piggyback Size 0916 1.75"44mm
5.7"145mm
5.7"145mm
8.4"213mm
8.0 lbs.3.6 kg.
2
1212015 Piggyback Size 1212 1.75"44mm
5.0"127mm
4.8"122mm
7.8"198mm
6.0 lbs.2.7 kg.
2
1216012 Piggyback Size 1216 1.75"44mm
5.7"145mm
5.7"145mm
8.4"213mm
9.0 lbs.4.1 kg.
2
03−ACTUATORS Wedge Brakes
03 − 26
MAXIBRAKE® I−Series Spring Brakes
Type 20 MAXIBRAKE® I Series Spring BrakeFeatures:
All steel housings provide strength, durabilityand extra corrosion resistance.
•
Aluminum piston and nylon bearing providemaximum guidance stability that diffuseslateral and twisting motion.
•
Steel alloy springs are epoxy coated toprotect against rust and corrosion.
•
Deeper spring cavities and optional springforce outputs offer uniform output and longerservice life.
•
Unit cannot be released manually, making itinoperative. This insures the vehicle cannotbe moved until the air supply is at a safelevel.
•
Complete spring brake units available with#50, #60 or #75 springs.
•
Notes:
1) Single Pack − 1 per Box.
2) Replacement Parts listed later in this section.
SKU# Product Description Spring Push Rod OEM Part Number CoreGroup
MA15770 MAXIBRAKE® 2050 Universal Spring Brake − I Series20"
50# Universal 8" KSM2050KC800NN −
MA15771 MAXIBRAKE® 2060 Universal Spring Brake − I Series20"
60# Universal 8" KSM2060KC800NN −
MA15771X Remanufactured MAXIBRAKE® 2060 Universal SpringBrake − I Series 20"
60# Universal 8" KSM2060KC800NN MX020
MA15772 MAXIBRAKE® 2075 Universal Spring Brake − I Series20"
75# Universal 8" KSM2075KC800NN −
MAXIBRAKE® Spring Brakes 03−ACTUATORS
03 − 27
MAXIBRAKE® I−Series Spring Brakes
Type 24 MAXIBRAKE® I Series Spring BrakeFeatures:
All steel housing provide strength, durabilityand extra corrosion resistance.
•
Aluminum piston and nylon bearing providemaximum guidance stability that diffuseslateral and twisting motion.
•
Steel alloy springs are epoxy coated toprotect against rust and corrosion.
•
Deeper spring cavities and optional springforce outputs offer uniform output and longerservice life.
•
Unit cannot be released manually, making itinoperative. This insures the vehicle cannotbe moved until the air supply is at a safelevel.
•
Complete spring brake units available with#50, #60 or #75 springs.
•
Notes:
1) Single Pack − 1 per Box.
2) Replacement Parts listed later in this section.
SKU# Product Description Spring Push Rod OEM Part Number CoreGroup
MA15773 MAXIBRAKE® 2450 Universal Spring Brake − I Series24"
50# Universal 8" KSM2450KC800NN −
MA15774 MAXIBRAKE® 2460 Universal Spring Brake − I Series 60# Universal 8" KSM2460KC800NN −
MA15774X Remanufactured MAXIBRAKE® 2460 Universal SpringBrake − I Series 24"
60# Universal 8" KSM2460KC800NN MX024
MA15775 MAXIBRAKE® 2475 Universal Spring Brake − I Series24"
75# Universal 8" KSM2475KC800NN −
MA15775X Remanufactured MAXIBRAKE® 2475 Universal SpringBrake − I Series 24"
75# Universal 8" KSM2475KC800NN MX024
03−ACTUATORS MAXIBRAKE® Spring Brakes
03 − 28
MAXIBRAKE® I−Series Spring Brakes
Type 30 MAXIBRAKE® I Series Spring BrakeFeatures:
All steel housing provide strength, durabilityand extra corrosion resistance.
•
Aluminum piston and nylon bearing providemaximum guidance stability that diffuseslateral and twisting motion.
•
Steel alloy springs are epoxy coated toprotect against rust and corrosion.
•
Deeper spring cavities and optional springforce outputs offer uniform output and longerservice life.
•
Unit cannot be released manually, making itinoperative. This insures the vehicle cannotbe moved until the air supply is at a safelevel.
•
Complete spring brake units available with#50, #60 or #75 springs.
•
Notes:
1) Single Pack − 1 per Box.
2) Replacement Parts listed later in this section.
SKU# Product Description Spring Push Rod OEM Part Number CoreGroup
MA15776 MAXIBRAKE® 3060 Universal Spring Brake − I Series30"
60# Universal 8" KSM3060KC800NN −
MA15776X Remanufactured MAXIBRAKE® 3060 UniversalSpring Brake − I Series 30"
60# Universal 8" KSM3060KC800NN MX030
MA15777 MAXIBRAKE® 3075 Universal Spring Brake − I Series30"
75# Universal 8" KSM3075KC800NN −
MA15777X Remanufactured MAXIBRAKE® 3075 UniversalSpring Brake − I Series 30"
75# Universal 8" KSM3075KC800NN MX030
MA46141X MAXIBRAKE® I Series 30" Spring Brake 60#, Boot 5.50" KSM3060JCS46141 MX030
MAXIBRAKE® Spring Brakes 03−ACTUATORS
03 − 29
MAXIBRAKE® I−Series Spring Brakes
Type 36 MAXIBRAKE® I Series Spring BrakeFeatures:
All steel housing provide strength, durabilityand extra corrosion resistance.
•
Aluminum piston and nylon bearing providemaximum guidance stability that diffuseslateral and twisting motion.
•
Steel alloy springs are epoxy coated toprotect against rust and corrosion.
•
Deeper spring cavities and optional springforce outputs offer uniform output and longerservice life.
•
Unit cannot be released manually, making itinoperative. This insures the vehicle cannotbe moved until the air supply is at a safelevel.
•
Complete spring brake units available with#50, #60 or #75 springs.
•
Notes:
1) Single Pack − 1 per Box.
2) Replacement Parts listed later in this section.
SKU# Product Description Spring Push Rod OEM Part Number CoreGroup
MA15778 MAXIBRAKE® 3660 Universal Spring Brake − I Series36"
60# Universal 8" KSM3660KC800NN −
MA15778X Remanufactured MAXIBRAKE® 3660 Spring Brake − ISeries 36"
60# Universal 8" KSM3660KC800NN MX036
MA15779 MAXIBRAKE® 3675 Universal Spring Brake − I Series36"
75# Universal 8" KSM3675KC800NN −
MA15779X Remanufactured MAXIBRAKE® 3675 Universal SpringBrake − I Series 36"
75# Universal 8" KSM3675KC800NN MX036
03−ACTUATORS MAXIBRAKE® Spring Brakes
03 − 30
MAXIBRAKE® H−Series Spring BrakesFeatures:
All steel housing provide strength, durability andextra corrosion resistance.
•
Steel piston and nylon bearings provide maximumguidance stability that diffuses lateral and twistingmotion.
•
Steel alloy springs are epoxy coated to protectagainst rust and corrosion.
•
Deeper spring cavities and optional spring forceoutputs offer uniform output and longer service life.
•
The Maxibrake® H−Series Air and HydraulicSpring−Set Parking Brake release mechanisms arehoused inside the unit making them readilyavailable for use.
•
Stamped steel piston with 360° heavy duty plasticbushing and O−Ring seal.
•
Deeper spring cavities and optional spring forceoutputs offer uniform output and longer service life.
•
Notes:
1) Single Pack − 1 per Box.
2) Replacement Parts listed later in this section.
SKU# Product Description Notes OEM PartNumber
CoreGroup
MA15500 MAXIBRAKE® H−Series Hydraulic Spring−SetParking Brake
Complete Unit KSH101E −
MA15500X Remanufactured MAXIBRAKE® H−Series HydraulicSpring−Set Parking Brake
Complete Unit KSH101E MX101
MA15502 MAXIBRAKE® H−Series Hydraulic Spring−SetParking Brake
Complete Unit with optionalFluid Inlet Elbow
KSH101F −
MA15502X Remanufactured MAXIBRAKE® H−Series HydraulicSpring−Set Parking Brake
Complete Unit with optionalFluid Inlet Elbow
KSH101F MX101
MA15504 MAXIBRAKE® H−Series Air Spring−Set ParkingBrake
Complete Unit with3/8" NPT Air Inlet
KSH202C −
MA15504X Remanufactured MAXIBRAKE® H−Series AirSpring−Set Parking Brake
Complete Unit with3/8" NPT Air Inlet
KSH202C MX101
MAXIBRAKE® Spring Brakes 03−ACTUATORS
03 − 31
MAXIBRAKE® HR−Series Spring BrakeFeatures:
All steel housing provide strength, durabilityand extra corrosion resistance.
•
Steel piston and nylon bearings providemaximum guidance stability that diffuseslateral and twisting motion.
•
Steel alloy springs are epoxy coated toprotect against rust and corrosion.
•
Deeper spring cavities and optional springforce outputs offer uniform output and longerservice life.
•
Unit cannot be released manually, making itinoperative. This insures the vehicle cannotbe moved until the air supply is at a safelevel.
•
Notes:
1) Single Pack − 1 per Box.
2) Replacement Parts listed later in this section.
SKU# Product Description Spring OEM Part Number
MA15509 MAXIBRAKE® HR−Series Spring Brake − Pull Type − Hydraulic (850 lbs.) 04 KSHR2PT04H625NN
03−ACTUATORS MAXIBRAKE® Spring Brakes
03 − 32
MAXIBRAKE® R−Series Spring Brake
MAXIBRAKE® R−Series Pull Type Spring BrakesFeatures:
All steel housing provide strength, durabilityand extra corrosion resistance.
•
Steel piston and nylon bearings providemaximum guidance stability that diffuseslateral and twisting motion.
•
Steel alloy springs are epoxy coated toprotect against rust and corrosion.
•
Deeper spring cavities and optional springforce outputs offer uniform output and longerservice life.
•
Unit cannot be released manually, making itinoperative. This insures the vehicle cannotbe moved until the air supply is at a safelevel.
•
Specifications:
Maximum Hydraulic Pressure 125PSI
Notes:
1) Single Pack − 1 per Box.
2) Mounting Hardware not included.
3) Replacement Parts listed later in this section.
SKU# Product Description Stroke Spring Push Rod OEM Part Number
MA15650 MAXIBRAKE® R−Series − Air Application − Pull Type 1.38" #40 8" KSMR0PT40−800NN
MA15652 MAXIBRAKE® R−Series − Air Application − Pull Type 1.38" #60 8" KSMR0PT60−800NN
MA15654 MAXIBRAKE® R−Series − Air Application − Pull Type 2.25" #40 8" KSMR1PT40−800NN
MA15655 MAXIBRAKE® R−Series − Air Application − Pull Type 2.25" #50 8" KSMR1PT50−800NN
MA15656 MAXIBRAKE® R−Series − Air Application − Pull Type 2.25" #60 8" KSMR1PT60−800NN
MA15657 MAXIBRAKE® R−Series − Air Application − Pull Type 2.25" #75 8" KSMR1PT75−800NN
MA15659 MAXIBRAKE® R−Series − Air Application − Pull Type 2.62" #50 8" KSMR2PT50−800NN
MA15660 MAXIBRAKE® R−Series − Air Application − Pull Type 2.62" #60 8" KSMR2PT60−800NN
MA15661 MAXIBRAKE® R−Series − Air Application − Pull Type 2.62" #75 8" KSMR2PT75−800NN
MA15662 MAXIBRAKE® R−Series − Air Application − Pull Type 3.00" #40 8" KSMR3PT40−800NN
MA15663 MAXIBRAKE® R−Series − Air Application − Pull Type 3.00" #50 8" KSMR3PT50−800NN
MA15664 MAXIBRAKE® R−Series − Air Application − Pull Type 3.00" #60 8" KSMR3PT60−800NN
MA15665 MAXIBRAKE® R−Series − Air Application − Pull Type 3.00" #75 8" KSMR3PT75−800NN
MA15666 MAXIBRAKE® R−Series − Air Application − Pull Type 3.00" #60 8" KSMR3PT60−800YB
MAXIBRAKE® Spring Brakes 03−ACTUATORS
03 − 33
MAXIBRAKE® R−Series Spring Brake
MAXIBRAKE® R−Series Push Type Spring BrakeFeatures:
All steel housing provide strength, durabilityand extra corrosion resistance.
•
Steel piston and nylon bearings providemaximum guidance stability that diffuseslateral and twisting motion.
•
Steel alloy springs are epoxy coated toprotect against rust and corrosion.
•
Deeper spring cavities and optional springforce outputs offer uniform output and longerservice life.
•
Unit cannot be released manually, making itinoperative. This insures the vehicle cannotbe moved until the air supply is at a safelevel.
•
Specifications:
Maximum Hydraulic Pressure 125PSI
Notes:
1) Single Pack − 1 per Box.
2) Replacement Parts listed later in this section.
SKU# Product Description Stroke Spring Push Rod OEM Part Number
MA15600 MAXIBRAKE® R−Series − Air Application − Push Type 1.38" #40 8" KSMR0PH40−800NN
MA15601 MAXIBRAKE® R−Series − Air Application − Push Type 1.38" #50 8" KSMR0PH50−800NN
MA15603 MAXIBRAKE® R−Series − Air Application − Push Type 1.38" #75 8" KSMR0PH75−800NN
MA15605 MAXIBRAKE® R−Series − Air Application − Push Type 1.38" #75 8" KSMR0PHS75−800NN
MA15606 MAXIBRAKE® R−Series − Air Application − Push Type 2.25" #40 8" KSMR1PH40−800NN
MA15607 MAXIBRAKE® R−Series − Air Application − Push Type 2.25" #50 8" KSMR1PH50−800NN
MA15608 MAXIBRAKE® R−Series − Air Application − Push Type 2.25" #60 8" KSMR1PH60−800NN
MA15609 MAXIBRAKE® R−Series − Air Application − Push Type 2.25" #75 8" KSMR1PH75−800NN
MA15610 MAXIBRAKE® R−Series − Air Application − Push Type 2.25" #60 8" KSMR1PHS50−800NN
MA15612 MAXIBRAKE® R−Series − Air Application − Push Type 2.25" #75 8" KSMR1PHS75−800NN
MA15614 MAXIBRAKE® R−Series − Air Application − Push Type 2.62" #50 8" KSMR2PH50−800NN
MA15615 MAXIBRAKE® R−Series − Air Application − Push Type 2.62" #60 8" KSMR2PH60−800NN
MA15616 MAXIBRAKE® R−Series − Air Application − Push Type 2.62" #75 8" KSMR2PH75−800NN
MA15617 MAXIBRAKE® R−Series − Air Application − Push Type 2.62" #50 8" KSMR2PHS50−800NN
MA15618 MAXIBRAKE® R−Series − Air Application − Push Type 2.62" #60 8" KSMR2PHS60−800NN
MA15619 MAXIBRAKE® R−Series − Air Application − Push Type 2.62" #75 8" KSMR2PHS75−800NN
MA15621 MAXIBRAKE® R−Series − Air Application − Push Type 3.00" #50 8" KSMR3PH50−800NN
MA15622 MAXIBRAKE® R−Series − Air Application − Push Type 3.00" #60 8" KSMR3PH60−800NN
MA15623 MAXIBRAKE® R−Series − Air Application − Push Type 3.00" #75 8" KSMR3PH75−800NN
MA15624 MAXIBRAKE® R−Series − Air Application − Push Type 3.00" #50 8" KSMR3PHS50−800NN
03−ACTUATORS MAXIBRAKE® Spring Brakes
03 − 34
MAXIBRAKE® Camtite Series Spring BrakesFeatures:
All steel housings provide strength, durabilityand extra corrosion resistance.
•
Steel piston and nylon bearings providemaximum guidance stability that diffuseslateral and twisting motion.
•
Steel alloy springs are epoxy coated toprotect against rust and corrosion.
•
Deeper spring cavities and optional springforce outputs offer uniform output and longerservice life.
•
Booster Spring may be combined withmedium and heavy spring for additionalranges of force outputs.
•
Notes:
1) Single Pack − 1 per Box.
2) Replacement Parts listed later in this section.
SKU# Product Description Spring Push Rod OEM Part Number
MA15551 MAXIBRAKE® Camtite Series Spring Brake − Type24
Heavy 8" −
MA15553 MAXIBRAKE® Camtite Series Spring Brake − Type24
Heavy Spring with Booster 8" KSC24HBBC−800NN
MA15555 MAXIBRAKE® Camtite Series Spring Brake − Type24
Medium 8" −
MA15557 MAXIBRAKE® Camtite Series Spring Brake − Type24
Medium Springwith Booster
8" KSC24MBBC−800NN
MA15559 MAXIBRAKE® Camtite Series Spring Brake − Type30
Heavy 8" −
MA15561 MAXIBRAKE® Camtite Series Spring Brake − Type30
Heavy Springwith Booster
8" KSC30HBBC−800NN
MA15565 MAXIBRAKE® Camtite Series Spring Brake − Type30
Medium Springwith Booster
8" KSC30MBBC−800NN
MA15567 MAXIBRAKE® Camtite Series Spring Brake − Type36
Heavy 8" −
MA15569 MAXIBRAKE® Camtite Series Spring Brake − Type36
Heavy Springwith Booster
8" KSC36HBBC−800NN
MA15573 MAXIBRAKE® Camtite Series Spring Brake − Type36
Medium Springwith Booster
8" KSC36MBBC−800NN
MAXIBRAKE® Spring Brakes 03−ACTUATORS
03 − 35
MAXIBRAKE® 50−Series Spring BrakesFeatures:
All steel housings provide strength, durability andextra corrosion resistance
•
Nylon piston and push rod bearings preventmetal−to−metal contact.
•
Packing cup type piston seals provide positive sealthroughout articulating action.
•
Dual pistons (service and spring chamber) insuresthat pressure bearing surface remains constant.
•
Notes:
1) Single Pack − 1 per Box.
2) Replacement Parts listed later in this section.
SKU# Product Description Service Size Push Rod OEM Part Number
MA15690 MAXIBRAKE® 50−Series Spring Brake 50" 1.75" KSC50HBBC−175NN
MA15691 MAXIBRAKE® 50−Series Spring Brake 50" 8.00" KSC50HBBC−800NN
03−ACTUATORS MAXIBRAKE® Spring Brakes
03 − 36
MAXIBRAKE® 50−Series Service ChambersFeatures:
Output is constant.•
Black epoxy coated finish allows for extra corrosion resistance.•
Heavy duty steel and ductile construction for added strength.•
Standard mounting with heavy duty 3/4" mounting studs.•
Notes:
1) Single Pack − 1 per Box.
2) Air applied spring release.
3) Replacement Parts listed later in this section.
SKU# Product Description Contains
MA15703 MAXIBRAKE® 50−Series Service Chamber − B Model 4" Air with 8.00" Push Rod, with Yoke and Boot.
MAXIBRAKE® Spring Brakes 03−ACTUATORS
03 − 37
Wedge Brake Components
Spring Brake − Service Side and Service Chamber Components
SKU# Product Description Qty. Application Pic. #
0956001 Pressure Cap for Anchorlok® Spring Brake 1 Model Type 9SD 1
0962001 Diaphragm (Service) for Anchorlok® Spring Brake 1 Model Types 9SD, 0912 and 0916 2
0964003 Clamp Band Assembly (Service) for Anchorlok® SpringBrake
1 Model Types 9SD, 0912 and 0916 4
1256001 Pressure Cap for Anchorlok® Spring Brake 1 Model Type 12SD 1
1262001 Diaphragm for Anchorlok® Spring Brake 1 Model Types 0912 and 1212 Emergency12SD, 1212 and 1216 Service
2
1264003 Clamp Band Assembly for Anchorlok® Spring Brake 1 Model Types 0912 and 1212 Emergency12SD, 1212 and 1216 Service
4
1299001 Release Stud Assembly for Anchorlok® Spring Brake 1 Model Types 0912 and 1212 Not Shown
9999130 Nut for Anchorlok® Spring Brake 1 All 3
9999131 Dust Boot for Anchorlok® Spring Brake 1 All 5
9999143 Carriage Bolt and Nut Assembly for Anchorlok® SpringBrake
2 All 6
03−ACTUATORS Service Components
03 − 38
Wedge Brake Components
Type 09 Housing Assembly Replacement KitNotes:
1) Kit contains: Diaphragm, Push Rod, Dust Boot, Housing andNut.
2) Measure tube length from the end of the tube to the flat inthe housing.
SKU# Product Description Quantity Application
0984001 Housing Assembly Replacement Kit − Bendix® 1 Type 09 Wedge Brake with 2.25" Tube Length
0984003 Housing Assembly Replacement Kit − Bendix® 1 Type 09 Wedge Brake with 3.50" Tube Length
0984004 Housing Assembly Replacement Kit − Bendix® 1 Type 09 Wedge Brake with 4.00" Tube Length
0984005 Housing Assembly Replacement Kit − Bendix® 1 Type 09 Wedge Brake with 5.00" Tube Length
0984006 Housing Assembly Replacement Kit − Bendix® 1 Type 09 Wedge Brake with 4.50" Tube Length
0984007 Housing Assembly Replacement Kit − Bendix® 1 Type 09 Wedge Brake with 6.00" Tube Length
0984008 Housing Assembly Replacement Kit − Bendix® 1 Type 09 Wedge Brake with 7.00" Tube Length
0984009 Housing Assembly Replacement Kit − Bendix® 1 Type 09 Wedge Brake with 7.88" Tube Length
0984010 Housing Assembly Replacement Kit − Bendix® 1 Type 09 Wedge Brake with 9.38" Tube Length
0984011 Housing Assembly Replacement Kit − Bendix® 1 Type 09 Wedge Brake with 10.20" Tube Length
0984012 Housing Assembly Replacement Kit − Bendix® 1 Type 09 Wedge Brake with 14.50" Tube Length
0985001 Housing Assembly Replacement Kit − Meritor 1 Type 09 Wedge Brake with 2.25" Tube Length
0985003 Housing Assembly Replacement Kit − Meritor 1 Type 09 Wedge Brake with 3.00" Tube Length
0985004 Housing Assembly Replacement Kit − Meritor 1 Type 09 Wedge Brake with 4.50" Tube Length
0985005 Housing Assembly Replacement Kit − Meritor 1 Type 09 Wedge Brake with 5.00" Tube Length
0985006 Housing Assembly Replacement Kit − Meritor 1 Type 09 Wedge Brake with 6.00" Tube Length
0985007 Housing Assembly Replacement Kit − Meritor 1 Type 09 Wedge Brake with 7.00" Tube Length
0985008 Housing Assembly Replacement Kit − Meritor 1 Type 09 Wedge Brake with 3.50" Tube Length
0985009 Housing Assembly Replacement Kit − Meritor 1 Type 09 Wedge Brake with 7.88" Tube Length
0985010 Housing Assembly Replacement Kit − Meritor 1 Type 09 Wedge Brake with 9.38" Tube Length
0985011 Housing Assembly Replacement Kit − Meritor 1 Type 09 Wedge Brake with 10.20" Tube Length
0985012 Housing Assembly Replacement Kit − Meritor 1 Type 09 Wedge Brake with 14.50" Tube Length
Service Components 03−ACTUATORS
03 − 39
Wedge Brake Components
Type 12 Housing Assembly Replacement KitNotes:
1) Kit contains: Diaphragm, Push Rod, Dust Boot, Housing andNut.
2) Measure tube length from the end of the tube to the flat inthe housing.
SKU# Product Description Quantity Application
1284002 Housing Assembly Replacement Kit − Bendix® 1 Type 12 Wedge Brake with 14.50" Tube Length
1284003 Housing Assembly Replacement Kit − Bendix® 1 Type 12 Wedge Brake with 2.25" Tube Length
1284005 Housing Assembly Replacement Kit − Bendix® 1 Type 12 Wedge Brake with 3.00" Tube Length
1284006 Housing Assembly Replacement Kit − Bendix® 1 Type 12 Wedge Brake with 3.50" Tube Length
1284007 Housing Assembly Replacement Kit − Bendix® 1 Type 12 Wedge Brake with 4.00" Tube Length
1284008 Housing Assembly Replacement Kit − Bendix® 1 Type 12 Wedge Brake with 4.50" Tube Length
1284009 Housing Assembly Replacement Kit − Bendix® 1 Type 12 Wedge Brake with 5.00" Tube Length
1284010 Housing Assembly Replacement Kit − Bendix® 1 Type 12 Wedge Brake with 6.00" Tube Length
1284012 Housing Assembly Replacement Kit − Bendix® 1 Type 12 Wedge Brake with 7.00" Tube Length
1284013 Housing Assembly Replacement Kit − Bendix® 1 Type 12 Wedge Brake with 7.88" Tube Length
1284014 Housing Assembly Replacement Kit − Bendix® 1 Type 12 Wedge Brake with 9.38" Tube Length
1284015 Housing Assembly Replacement Kit − Bendix® 1 Type 12 Wedge Brake with 10.20" Tube Length
1285002 Housing Assembly Replacement Kit − Meritor 1 Type 12 Wedge Brake with 10.20" Tube Length
1285005 Housing Assembly Replacement Kit − Meritor 1 Type 12 Wedge Brake with 14.50" Tube Length
1285007 Housing Assembly Replacement Kit − Meritor 1 Type 12 Wedge Brake with 2.25" Tube Length
1285010 Housing Assembly Replacement Kit − Meritor 1 Type 12 Wedge Brake with 3.00" Tube Length
1285011 Housing Assembly Replacement Kit − Meritor 1 Type 12 Wedge Brake with 3.50" Tube Length
1285012 Housing Assembly Replacement Kit − Meritor 1 Type 12 Wedge Brake with 4.00" Tube Length
1285014 Housing Assembly Replacement Kit − Meritor 1 Type 12 Wedge Brake with 4.50" Tube Length
1285015 Housing Assembly Replacement Kit − Meritor 1 Type 12 Wedge Brake with 5.00" Tube Length
1285017 Housing Assembly Replacement Kit − Meritor 1 Type 12 Wedge Brake with 6.00" Tube Length
1285018 Housing Assembly Replacement Kit − Meritor 1 Type 12 Wedge Brake with 7.00" Tube Length
1285019 Housing Assembly Replacement Kit − Meritor 1 Type 12 Wedge Brake with 7.88" Tube Length
1285022 Housing Assembly Replacement Kit − Meritor 1 Type 12 Wedge Brake with 9.38" Tube Length
03−ACTUATORS Service Components
03 − 40
Gold Seal and Life Seal Replacement Parts
Boot Assembly, Dust Shield, Release Tool and Plug
Package − 10 each
SKU# Product Description Features
BA1 Boot Assembly For 5/8" Push Rod
DS1 Dust Shield 5/8" Push Rod, 1" (25.4mm) Hole
DS2 Dust Shield 3/4" Push Rod, 1" (25.4mm) Hole
DS3 Dust Shield − Blue 5/8" Push Rod, 1.58" (40mm) Hole
DS4 Dust Shield − Blue 3/4" Push Rod, 1.58" (40mm) Hole
RT1 Release Tool For all DDSB except xx36
RT2 Release Tool For 3036 and 3636
RT3 Release Tool For Remote Chambers
RTP1 Release Tool Plug − Blue For Gold Seal & Clamp Style except xx36.
RTP2 Release Tool Plug For Midland Style
RTP3 Release Tool Plug For Gold Seal 3036 & 3636.
Service Components 03−ACTUATORS
03 − 41
Gold Seal and Life Seal Replacement Parts
Clamp Band KitFeatures:
Package − 10 each•
SKU# Product Description Application Features
CB09 T−09 Clamp Band Kit Service Chamber Contains two bolt style clamp bands.
CB12 T−12 Clamp Band Kit Service Chamber Contains two bolt style clamp bands.
CB16 T−16 Clamp Band Kit Service Chamber Contains two bolt style clamp bands.
CB16LS2 T−16 Clamp Band Kit Service Chamber Contains one piece clamp band, black finish.
CB20 T−20 Clamp Band Kit Service Chamber andType 20 MAXIBRAKE® I
Spring Brake
Contains two bolt style clamp bands.
CB20S1 T−20 Clamp Band Kit (Service Side) Anchorlok® Spring BrakeModel Types 20S and 2024
Contains two bolt style clamp bands,black finish.
CB24 T−24 Clamp Band Kit Service Chamber Contains two bolt style clamp bands.
CB24S1 T−24 Clamp Band Assembly Anchorlok® Spring BrakeModel Types 2030−XLS, 24S,
24S−LS, 2424, 2424−LS,2430, 2430−LS and
2430−XLS Service Side1624, 2024 and 2424 Emergency
Contains two bolt style clamp bands,black finish.
CB30 T−30 Clamp Band Kit Service Chamber Contains two bolt style clamp bands.
CB30S1 T−30 Clamp Band Kit Anchorlok® Spring BrakeModel Types 30S, 30S−LS,
3030, 3030−LS and3036 (2 piece Style) Service Side
2430, 2430−LS and 3030 Emergency
Contains two bolt style clamp bands,black finish.
CB36S1 T−36 Clamp Band Kit (Service Side) Anchorlok® Spring BrakeModel Types 36S and 3636
Contains two bolt style clamp bands,black finish.
03−ACTUATORS Service Components
03 − 42
Gold Seal and Life Seal Replacement Parts
Clevis, Clevis Pin
Package − 10 each
SKU# Product Description Features
CF1 Clevis Forged 0.5 PIN 1/2−20 UNF − 28
CF2 Clevis Forged 0.5 PIN 5/8−18 UNF − 28
CF3 Clevis Forged 5/8 PIN 5/8−18 UNF − 28
CF4 Clevis Forged 1/2 PIN 3/4−16 UNF − 28
CF5 Clevis Forged 14mm PIN M16 x 1.5
CF6 Clevis Forged 1/2 & 1/4 PIN 1.38 5/8−18 UNF − 28
CF7 Clevis Forged 1/2 & 1/4 PIN 1.25 5/8−18 UNF − 28
CF8 Clevis Forged 1/2 & 1/4 PIN 1.25 1/2−20 UNF − 28
CF9 Clevis − Remote −
CP1 Clevis Pin 1/2"
CP2 Clevis Pin 5/8"
CS2 Clevis Stamped 0.5 PIN 5/8−18 UNF − 28
Service Components 03−ACTUATORS
03 − 43
Gold Seal and Life Seal Replacement Parts
Hardware Kits and Pipe Plug Fitting
Package − 10 each
SKU# Product Description Features Picture Number
HW1 Mounting Hardware Kit Lock Washer & Standard Nut 7/16" − 14 4
HW2 Mounting Hardware Kit Lock Washer & Standard Nut 5/8" − 11 4
HW3 Mounting Hardware Kit Flat Washer & Locking Nut 5/8" − 11 5
HW4 Jam Nut 1/2" − 20 1
HW5 Jam Nut 5/8" − 18 1
HW6 Jam Nut M16 1
HW7 Jam Nut 3/4" − 16 1
HW8 Clamp Band Nut and Bolt 3/8" − 24 3
PP1 Pipe Plug Fitting 3/8", Square 2
03−ACTUATORS Service Components
03 − 44
Gold Seal and Life Seal Replacement Parts
DiaphragmsFeatures:
Package − 10 each•
SKU# Product Description Stroke Outside Diameter
DP09 T−09 Diaphragm 1.75"44mm
5.12
DP12 T−12 Diaphragm 1.75"44mm
5.47
DP16 T−16 Diaphragm 2.25"57mm
6.16
DP16L T−16L Diaphragm 2.50"64mm
6.16
DP20 T−20 Diaphragm 2.55"57mm
6.56
DP20L T−20L Diaphragm 2.50"64mm
6.56
DP24L T−24 and T−24L Diaphragm 2.25/2.50"57/64mm
7.00
DP24XL T−24XL Diaphragm 3.00"76mm
7.00
DP30 T−30 Diaphragm 2.50"64mm
7.88
DP30L T−30L Diaphragm 3.00"76mm
7.88
DP36 T−36 Diaphragm 3.00"76mm
8.50
Service Components 03−ACTUATORS
03 − 45
Gold Seal and Life Seal Replacement Parts
Service Push Rod and Return Spring
Package − 1 each
SKU# Product Description Rod/Thread Length Features
PR20 T−20 Service Push Rod 13.50/10.50 5/8"−18 UNF
PR24 T−24 Service Push Rod 14.00/11.15 5/8"−18 UNF
PR24M T−24M Service Push Rod 12.50/8.60 M16
PR30 T−30 Service Push Rod 17.75/14.75 5/8"−18 UNF
PR30M T−30M Service Push Rod 12.62/8.90 M16
PR30S1 T−30 Service Push Rod 24.0/21.0 3/4"−14 UNF
PR36 T−36 Service Push Rod 18.00/14.25 5/8"−18 UNF
PR36S1 T−36 Service Push Rod 12.50/8.75 3/4"−14 UNF
RS5 Service Return Spring − For Midland and current T−30 & G(L)C 3030 2.5" Models
RS6 Service Return Spring − For Anchorlok and DDSB except 3636 and RS5
RS7 Service Return Spring − For Type 3636
03−ACTUATORS Service Components
03 − 46
Gold Seal and Life Seal Replacement Parts
Spring Brake Service Housing and Pressure Housing
Package − 1 each
SKU# Product Description Stroke Features
PH30 T−30 Pressure Housing 2.50"64mm
3/8"−18 NPTF Air Inlet
SBH24L Spring Brake Service Housing 2.25/2.50"57/64mm
9 Guage with 40mm Hole
SBH24XL Spring Brake Service Housing 3.00"76mm
9 Guage with 40mm Hole
SBH30 Spring Brake Service Housing 2.50"64mm
9 Guage
SBH30L Spring Brake Service Housing 3.00"76mm
9 Guage with 40mm Hole
Service Components 03−ACTUATORS
03 − 47
MAXIBRAKE® Replacement Parts
Cylinder Assemblies
SKU# Product Description Application Pic. #
KSM4040894 Cylinder Assembly (Air) MAXIBRAKE® R−Series Spring BrakePull Type, 1.38" stroke
−
M4031043 Cylinder Assembly (Air) MAXIBRAKE® R−Series Spring BrakeAir − Push Type, R1PH 2.25" stroke
1
M4031089 Cylinder Assembly (Air) MAXIBRAKE® R−Series Spring BrakeAir − Push Type, R3PH 3.00" stroke
2
M4031090 Cylinder Assembly (Air) MAXIBRAKE® R−Series Spring BrakeAir − Push Type, R2PH/R2PHS 2.62" stroke
2
M4040527 Cylinder Assembly Type 20 MAXIBRAKE® I Spring Brake − 3/8" NPT 2
M4040530 Cylinder Assembly Type 24 MAXIBRAKE® I Spring Brake − 3/8" NPT 3
M4040533 Cylinder Assembly Type 30 MAXIBRAKE® I Spring Brake − 3/8" NPT 4
M4040596 Cylinder Assembly Type 36 MAXIBRAKE® I Spring Brake − 3/8" NPT 5
M4040772 Cylinder Assembly (Air) MAXIBRAKE® R−Series Spring BrakeAir − Pull Type, 2.62" stoke
6
M4040900 Cylinder Assembly (Air) MAXIBRAKE® R−Series Spring BrakeAir − Pull Type, 3.00" stroke
6
M4041173 Cylinder Assembly − Universal Type 24 MAXIBRAKE® I Spring Brake 7
M4041175 Cylinder Assembly − Universal Type 30 MAXIBRAKE® I Spring Brake 7
M4041177 Cylinder Assembly − Universal Type 36 MAXIBRAKE® I Spring Brake 5
M4041302 Cylinder Assembly (Hydraulic) MAXIBRAKE® R−Series Spring BrakeHydraulic − Pull Type, 2.25" stroke
8
M4740420 Cylinder Assembly Type 24 and 30 MAXIBRAKE® Camtite Series Spring Brake 9
M4740432 Cylinder Assembly Type 36 MAXIBRAKE® Camtite Series Spring Brake 9
M5040567 Service Cylinder Assembly MAXIBRAKE® 50−Series Spring Brake 10
M5040580 Emergency Cylinder Assembly MAXIBRAKE® 50−Series Spring Brake 9
M5200143 Cylinder Assembly MAXIBRAKE® H−Series Air Spring−Set Parking Brake −
03−ACTUATORS Service Components
03 − 48
MAXIBRAKE® Replacement Parts
Piston Assemblies
SKU# Product Description Application Pic. #
M4031742 Piston Assembly MAXIBRAKE® R−SeriesAir − Push Type Spring Brake
R1PH 2.25" stroke
1
M4031743 Piston Assembly MAXIBRAKE® R−SeriesAir − Push Type Spring Brake
R2PH 2.62" stroke and R2PHS 2.62" stroke
1
M4031744 Piston Assembly MAXIBRAKE® R−SeriesAir − Push Type Spring Brake
R3PH 3.00" stroke only
1
M4040893 Piston Assembly MAXIBRAKE® R−Series Spring BrakeAir − Pull Type (all strokes)
includes Push Rod with standard 8.00" projection
2
M4740421 Piston Assembly MAXIBRAKE® Camtite Series Spring BrakeType 24, 30 and 36
3
M5040513 Service Piston Assembly MAXIBRAKE® 50−Series Spring Brake −
M5040516 Emergency Piston Assembly Kit MAXIBRAKE® 50−Series Spring Brake −
Service Components 03−ACTUATORS
03 − 49
MAXIBRAKE® Replacement Parts
Push Rod Assemblies
SKU# Product Description Application Notes Pic. #
M4036060 Push Rod Type 24 MAXIBRAKE® I Spring Brake 8.00" projection 1
M4036066 Push Rod Type 30 MAXIBRAKE® I Spring Brake 8.00" projection 1
M4036067 Push Rod Type 36 MAXIBRAKE® I Spring Brake 1.75" projection 2
M4036068 Push Rod Type 36 MAXIBRAKE® I Spring Brake 8.00" projection 1
M4040717 Push Rod Assembly MAXIBRAKE® R−SeriesAir − Push Type Spring Brake
with R3PH 3.00" stroke
Includes Push Rodwith standard 8.00"
projection
3
M4040719 Push Rod Assembly MAXIBRAKE® R−SeriesAir − Push Type Spring Brake
with R1PH 2.25" stroke
Includes Push Rodwith standard 8.00"
projection
3
M4040796 Push Rod Assembly MAXIBRAKE® R−SeriesAir − Push Type Spring Brake
with R2PHS 2.62" stroke
Includes Push Rodwith standard 8.00"
projection
3
M4731986 Push Rod Assembly Type 30 MAXIBRAKE® Camtite Series Spring Brake 8.00" projection 2
M4740102 Push Rod Assembly Type 36 MAXIBRAKE® Camtite Series Spring Brake 8.00" projectionfully threaded
2
03−ACTUATORS Service Components
03 − 50
MAXIBRAKE® Replacement Parts
Springs and Accessories
SKU# Product Description Application Pic. #
M4031002 #75 Spring Type 20, 24, 30, 36 MAXIBRAKE® I−Series Spring BrakeMAXIBRAKE® R−Series Spring BrakeAir − Push and Pull Type, all strokes
−
M4031017 Spring Support Type 24, 30, 36 MAXIBRAKE® I Spring Brake 1
M4031021 #60 Spring Type 20, 24, 30, 36 MAXIBRAKE® I−Series Spring BrakeMAXIBRAKE® R−Series Spring BrakeAir − Push and Pull Type, all strokes
−
M4031046 Push Rod Retainer Spring Type 20, 24, 30, 36 MAXIBRAKE® I Spring Brake 6
M4031047 Spring Retainer Type 20, 24, 30, 36 MAXIBRAKE® I Spring Brake 2
M4031070 Spring Support MAXIBRAKE® R−Series Spring BrakeAir − Push and Pull Type, all strokes
3
M4031295 #50 Spring Type 20, 24, 30, 36 MAXIBRAKE® I−Series Spring BrakeMAXIBRAKE® R−Series Spring Brake, Pull Type, all strokes
−
M4040475 Spring Support Type 20 MAXIBRAKE® I Spring Brake −
M4041178 #40 Spring MAXIBRAKE® R−Series Spring Brake − Air − Pull Type, all strokes −
M4731921 Medium Spring Type 24, 30 and 36 MAXIBRAKE® Camtite Series Spring Brake 7
M4731922 Heavy Spring Type 24, 30 and 36 MAXIBRAKE® Camtite Series Spring Brake 7
M4740112 Booster Spring Type 24, 30 and 36 MAXIBRAKE® Camtite Series Spring Brake 8
M5040364 Return Spring MAXIBRAKE® 50−Series Spring Brake −
M5040377 Return Spring Locator MAXIBRAKE® 50−Series Spring BrakeMAXIBRAKE® 50−Series Service Chamber − B Model
4
M5040378 Spring Locator MAXIBRAKE® 50−Series Spring Brake 5
M5040388 Heavy Spring MAXIBRAKE® 50−Series Spring Brake 8
M5040390 Booster Spring MAXIBRAKE® 50−Series Spring Brake 9
M5040555 Spring MAXIBRAKE® 50−Series Service Chamber − B Model 10
Service Components 03−ACTUATORS
03 − 51
MAXIBRAKE® Replacement Parts
Miscellaneous
SKU# Product Description Application
5040383 Filter MAXIBRAKE® 50−Series − Filter − Foam
KSH5200099 Fluid Inlet Fitting MAXIBRAKE® H−Series Spring Brake
M4031041 Cap Screw MAXIBRAKE® I−Series Type 24, 30, 36 andMAXIBRAKE® R−Series Spring BrakeAir − Push and Pull Type, all strokes
M4031044 Small O−Ring MAXIBRAKE® I−Series Type 20, 24, 30, 36 andMAXIBRAKE® R−Series Spring BrakeAir − Push and Pull Type, all strokes
M4031045 Large O−Ring MAXIBRAKE® R−Series Spring Brake − Air − Push and Pull Type, all strokes
M4031061 Clamp Band Kit Type 24 MAXIBRAKE® I and Camtite Spring Brake
M4031076 Plug Cylinder MAXIBRAKE® I−Series Type 24, 30, 36 andMAXIBRAKE® R−Series Spring BrakeAir − Push and Pull Type, all strokes
M4031134 Jam Nut MAXIBRAKE® I−Series Type 20, 24, 30, 36 andMAXIBRAKE® R−Series Spring Brake
Air − Push Type, all strokes
M4031161 Nylon Bushing MAXIBRAKE® I−Series Type 20, 24, 30, 36 andMAXIBRAKE® R−Series Spring Brake
Air − Push Type, all strokes
M4031173 Felt Wiper Ring (Air Unit Only) MAXIBRAKE® I−Series Type 20, 24, 30, 36 andMAXIBRAKE® R−Series Spring BrakeAir − Push and Pull Type, all strokes
M4031251 Diaphragm Type 24 MAXIBRAKE® I and Camtite Spring Brake
M4031252 Diaphragm Type 36 MAXIBRAKE® I and Camtite Spring Brake
M4031333 Boot Kit Type 20, 24, 30, 36 MAXIBRAKE® I Spring Brake
M4031334 Dust Boot Kit MAXIBRAKE® R−Series Spring Brake − Air − Push Type, all strokes
M4031340 Flange Nut MAXIBRAKE® I−Series Type 20, 24, 30, 36 andMAXIBRAKE® R−Series Spring Brake
Air − Push Type, all strokes
M4036174 Pressure Plate Assembly − 3/8" Side Type 30 MAXIBRAKE® I Spring Brake
M4040754 Steel Pressure Plate Type 24 MAXIBRAKE® I Spring Brake
M4040757 Steel Pressure Plate Type 36 MAXIBRAKE® I Spring Brake
M4040997 Pressure Plate Type 24 MAXIBRAKE® I Spring Brake
M4041367 Piston Bearing Type 20, 24, 30, 36 MAXIBRAKE® I Spring Brake
M4041502 Steel Stud Mounting Plate MAXIBRAKE® R−Series Spring Brake − Air − Push and Pull Type, all strokes
M4631656 Cap Screw MAXIBRAKE® Camtite Series Spring BrakeType 24, 30 and 36, MAXIBRAKE® 50−Series Spring Brake
M4731745 Nylon Bushing Type 24, 30 and 36 MAXIBRAKE® Camtite Series Spring Brake
M4731785 Follower Type 24, 30 and 36 MAXIBRAKE® Camtite Series Spring Brake
M4731799 Piston Seat Ring Type 24, 30 and 36 MAXIBRAKE® Camtite Series Spring Brake
M4731804 Retainer Ring Type 24, 30 and 36 MAXIBRAKE® Camtite Series Spring Brake
03−ACTUATORS Service Components
03 − 52
M4731805 Felt Wiper Ring Type 24, 30 and 36 MAXIBRAKE® Camtite Series Spring Brake
M4731970 Release Bolt Type 24 and 30 MAXIBRAKE® Camtite Series Spring Brake
M4731971 Filter Type 24, 30 and 36 MAXIBRAKE® Camtite Series Spring Brake
M4731974 Stop Washer Type 24, 30 and 36 MAXIBRAKE® Camtite Series Spring Brake
M4731975 Snap Plug Type 24, 30 and 36 MAXIBRAKE® Camtite Series Spring Brake
M4736161 Machine Screw Type 24, 30 and 36 MAXIBRAKE® Camtite Series Spring Brake
M4740012 Self−Tapping Screw Type 24, 30 and 36 MAXIBRAKE® Camtite Series Spring Brake
M4740105 Release Bolt Type 36 MAXIBRAKE® Camtite Series Spring Brake
M4740161 Instruction Washer Type 24, 30 and 36 MAXIBRAKE® Camtite Series Spring BrakeMAXIBRAKE® 50−Series Spring Brake
M4740299 Bulkhead 3/8" NPT Air Inlets for Type 24 MAXIBRAKE® Camtite Series Spring Brake
M4740313 Bulkhead 3/8" NPT Air Inlets for Type 36 MAXIBRAKE® Camtite Series Spring Brake
M4940273 Boot and Retainer Kit Type 24, 30 and 36 MAXIBRAKE® Camtite Series Spring Brake
M5040367 Service Piston Bearing MAXIBRAKE® 50−Series Spring Brake − Emergency Piston Bearing prior to5/00.
M5040368 Packing Cup MAXIBRAKE® 50−Series Spring Brake
M5040370 Bulkhead MAXIBRAKE® 50−Series Spring Brake
M5040372 Nylon Bushing MAXIBRAKE® 50−Series Spring Brake
M5040373 Snap Ring MAXIBRAKE® 50−Series Spring Brake
M5040391 Jam Nut MAXIBRAKE® 50−Series Spring BrakeMAXIBRAKE® 50−Series Service Chamber − B Model
M5040392 Yoke Kit MAXIBRAKE® 50−Series Spring BrakeMAXIBRAKE® 50−Series Service Chamber − B Model
M5040402 Service Filter MAXIBRAKE® 50−Series Spring BrakeMAXIBRAKE® 50−Series Service Chamber − B Model
M5040472 Cap Screw MAXIBRAKE® 50−Series Spring Brake
M5040486 Boot Kit MAXIBRAKE® 50−Series Spring Brake
M5040524 Boot Assembly MAXIBRAKE® 50−Series Service Chamber − B Model
M5040536 Filter Retaining Ring MAXIBRAKE® 50−Series Spring Brake
M5040538 Large Seal MAXIBRAKE® 50−Series Spring Brake
M5040557 O−Ring MAXIBRAKE® 50−Series Service Chamber − B Model
M5040563 Emergency Piston Bearing MAXIBRAKE® 50−Series Service Chamber − B ModelMAXIBRAKE® 50−Series Spring Brake
M5040585 Release Bolt Kit MAXIBRAKE® 50−Series Spring Brake
M5200108 Jam Nut MAXIBRAKE® H−Series Air Spring−Set Parking Brake
MQ5200180 Bleeder Valve and Adapter Kit MAXIBRAKE® H−Series Spring Brake
Service Components 03−ACTUATORS
03 − 53
MAXIBRAKE® Replacement Parts
Maintenance/Service Kits
SKU# Product Description Application Notes
M4040025 Aluminum Piston RepairKit
MAXIBRAKE® I Spring BrakeType 20, 24, 30, 36
−
M4040026 Maintenance Kit MAXIBRAKE® R−Series SpringBrakes
Kit includes parts to rebuild 2 units: (4) O−Rings, (2) Felt, (4)Bushings and (1) Grease
M4041406 Maintenance Kit MAXIBRAKE® I Spring BrakeType 20, 24, 30, 36
Use for aluminum piston only.
M4740157 Maintenance Kit MAXIBRAKE® Camtite SeriesSpring Brake Type 24, 30 and
36
−
M5040566 Maintenance Kit MAXIBRAKE® 50−SeriesService Chamber − B Model
Kit contains: (1) Piston Bearing,(2) O−Rings, (1) Lubricant,
(1) Spring Locator, (1) Filter,(1) Boot Strap and (1) Boot Adapter.
M5200078 Hydraulic Service Kit MAXIBRAKE® H−Series SpringBrake
Kit includes O−Rings, Piston Bearing,Insert, Piston Bearing Compressor,
Filter, TR−3 Lubricant, Release Bolt,Pin, and Slotted Nut.
M5200090 Hydraulic Service Kit MAXIBRAKE® H−Series SpringBrake
Kit includes O−Rings, Piston Bearing,Insert, Piston Bearing Compressor,
Filter and TR−3 Lubricant.
M5200092 Service Parts Kit MAXIBRAKE® H−Series SpringBrake
Kit includes Release Bolt, Pin,Slotted Nut and Filter.
M5200173 Air Service Kit MAXIBRAKE® H−Series SpringBrake
Kit includes O−Rings, Piston Bearing,Insert, Piston Bearing Compressor,
Filter, Release Bolt,Pin and Slotted Nut.
M5200200 Air Service Kit MAXIBRAKE® H−Series SpringBrake
Kit includes O−Rings, Piston Bearing,Insert, Piston Bearing Compressor,
Filter, TR−3 Lubricant, Release Bolt,Pin and Slotted Nut.
M5200201 Air Service Kit MAXIBRAKE® H−Series SpringBrake
Kit includes O−Rings, Piston Bearing,Insert, Piston Bearing Compressor,
Filter and TR−3 Lubricant.
MQ15708 Service Kit − Air MAXIBRAKE® HR−SeriesAir − Pull Type Spring Brake
−
RN21AD Spring BrakeMaintenance Kit
MAXIBRAKE® I Series SpringBrake
Type 20, 24, 30, 36
For both steel and aluminum pistons,services one unit.
RN21AE Spring BrakeMaintenance Kit
MAXIBRAKE® I Series SpringBrake
Type 20, 24, 30, 36
For both steel and aluminum pistons,services two units.
03−ACTUATORS Service Components
03 − 54
Service Diaphragm Performance CurvesNOTE: Service and Spring Brake Force Curves are Stated as Minimum Values.
Service Diaphragm Curves 03−ACTUATORS
03 − 55
Service Diaphragm Performance Curves
03−ACTUATORS Service Diaphragm Curves
03 − 56
Service Diaphragm Performance Curves
Service Diaphragm Curves 03−ACTUATORS
03 − 57
Service Diaphragm Performance Curves
03−ACTUATORS Service Diaphragm Curves
03 − 58
Spring Force Curves 03−ACTUATORS
03 − 59
03−ACTUATORS Spring Force Curves
03 − 60
Spring Force Curves 03−ACTUATORS
03 − 61
03−ACTUATORS Spring Brake Safety Precautions
03 − 62
Spring Brake Safety Precautions 03−ACTUATORS
03 − 63
03−ACTUATORS Spring Brake Safety Precautions
03 − 64
Recommended Preventative Maintenance
Preventative maintenance for Haldex Gold Seal and Life Seal combination spring brake models isrecommended every three months or every 25,000 miles (40,000 km).
•
IMPORTANT: ALWAYS BLOCK WHEELS to prevent vehicle rollaway when performing any brakemaintenance.
Check the conditions of the foundation brakes, including drums, shoes and linings, rollers, bushings, etc.1.
Check for structural damage of the spring brake, brake adjuster and s−cam. Replace if necessary.2.
Gold Seal Models:Apply the parking brake. Remove the dust plug from the rear of the spring housing andphysically inspect the condition of the parking spring. If the parking spring is broken,replace the spring brake with either a new piggyback unit or an entire unit. Please referto Piggyback Installation pages or to Combination Spring Brake Installation pages forspecific instructions (see Table of Contents for location).
IMPORTANT: ALWAYS replace dust plug after inspection.
Life Seal Models:Mechanically release the parking brake and follow the procedure listed in Life SealMechanical Release section (see Table of Contents for location).
3.
Apply the Service Brakes. Check the air lines and fittings for leaks. Check for proper torque according toTable 4 in Spring Brake Installation Instructions.
4.
After allowing the brake drum to cool to room temperature, check for the correct spring brake stroke andverify proper installation. Proper installation can be verified by following the instructions listed in SpringBrake Installation Instructions.
5.
Spring Brake Maintenance 03−ACTUATORS
03 − 65
Mechanical Release of Gold Seal Spring Brake
03−ACTUATORS Gold Seal − Mechanical Release
03 − 66
Gold Seal − Mechanical Release 03−ACTUATORS
03 − 67
03−ACTUATORS Gold Seal − Mechanical Release
03 − 68
Mechanical Release of Life Seal Spring Brake
Life Seal − Mechanical Release 03−ACTUATORS
03 − 69
03−ACTUATORS Combination Spring Brake Installation
03 − 70
Combination Spring Brake Installation 03−ACTUATORS
03 − 71
03−ACTUATORS Combination Spring Brake Installation
03 − 72
Combination Spring Brake Installation 03−ACTUATORS
03 − 73
03−ACTUATORS Combination Spring Brake Installation
03 − 74
Piggyback Installation Instructions 03−ACTUATORS
03 − 75
03−ACTUATORS Piggyback Installation Instructions
03 − 76
Rotate Mounting Bolts, Clamps, Air Inlet Ports 03−ACTUATORS
03 − 77
03−ACTUATORS Service Diaphragm Replacement
03 − 78
Disarming Procedures:Piggyback & Combination Service/Spring Brakes
Disarming Procedure 03−ACTUATORS
03 − 79
03−ACTUATORS Orange Alert Stroke Indicator
03 − 80
Determining Warranty Status 03−ACTUATORS
03 − 81
Notes
03−ACTUATORS Notes
03 − 82
03 − ActuatorsTable of Contents 03−1Part Number Index 03−3General Information Foreword 03−6 Terms 03−7 Spring Brake Models 03−8 Clamp and Wedge Brake Models 03−9 Identify Spring Brakes 03−10 How to Order S−Cam & Air Disc Brakes 03−12 How to Order Wedge Brakes 03−13Gold Seal Combination Spring Brakes 03−14Gold Seal Piggyback Spring Brakes 03−16Life Seal Combination Spring Brakes 03−17Life Seal Piggyback Spring Brakes 03−18Service Chamber Brakes 03−19Clamp Style Combination & Piggyback 03−21Midland Style Combination/Piggyback Brakes 03−22Wedge Brakes T09 Wedge Service Chamber 03−23 T12 Wedge Service Chamber 03−24 Wedge Combination Brakes 03−25 Wedge Piggyback Brakes 03−26MAXIBRAKE® Spring Brakes MAXIBRAKE® I−Series Spring Brakes Type 20 MAXIBRAKE® I Series Spring Brake 03−27 Type 24 MAXIBRAKE® I Series Spring Brake 03−28 Type 30 MAXIBRAKE® I Series Spring Brake 03−29 Type 36 MAXIBRAKE® I Series Spring Brake 03−30 MAXIBRAKE® H−Series Spring Brakes 03−31 MAXIBRAKE® HR−Series Spring Brake 03−32 MAXIBRAKE® R−Series Spring Brake MAXIBRAKE® R−Series Pull Type Spring Brakes 03−33 MAXIBRAKE® R−Series Push Type Spring Brake 03−34 MAXIBRAKE® Camtite Series Spring Brakes 03−35 MAXIBRAKE® 50−Series Spring Brakes 03−36 MAXIBRAKE® 50−Series Service Chambers 03−37Service Components Wedge Brake Components
Table of Contents 03−ACTUATORS
03 − 1
Spring Brake − Service Side and Service Chamber Components 03−38 Type 09 Housing Assembly Replacement Kit 03−39 Type 12 Housing Assembly Replacement Kit 03−40 Gold Seal and Life Seal Replacement Parts Boot Assembly, Dust Shield, Release Tool and Plug 03−41 Clamp Band Kit 03−42 Clevis, Clevis Pin 03−43 Hardware Kits and Pipe Plug Fitting 03−44 Diaphragms 03−45 Service Push Rod and Return Spring 03−46 Spring Brake Service Housing and Pressure Housing 03−47 MAXIBRAKE® Replacement Parts Cylinder Assemblies 03−48 Piston Assemblies 03−49 Push Rod Assemblies 03−50 Springs and Accessories 03−51 Miscellaneous 03−52 Maintenance/Service Kits 03−54Maintenance Service Diaphragm Curves 03−55 Spring Force Curves 03−59 Spring Brake Safety Precautions 03−62 Spring Brake Maintenance 03−65 Gold Seal − Mechanical Release 03−66 Life Seal − Mechanical Release 03−69 Combination Spring Brake Installation 03−70 Piggyback Installation Instructions 03−75 Rotate Mounting Bolts, Clamps, Air Inlet Ports 03−77 Service Diaphragm Replacement 03−78 Disarming Procedure 03−79 Orange Alert Stroke Indicator 03−80 Determining Warranty Status 03−81
03−ACTUATORS Table of Contents
03 − 2
Part Number Type Page #0900002 S 03−230900003 S 03−230900004 S 03−230900005 S 03−230900008 S 03−230900009 S 03−230900010 S 03−230912001 S 03−260912005 S 03−250912006 S 03−250916001 S 03−260956001 S 03−380962001 S 03−380964003 S 03−380984001 S 03−390984003 S 03−390984004 S 03−390984005 S 03−390984006 S 03−390984007 S 03−390984008 S 03−390984009 S 03−390984010 S 03−390984011 S 03−390984012 S 03−390985001 S 03−390985003 S 03−390985004 S 03−390985005 S 03−390985006 S 03−390985007 S 03−390985008 S 03−390985009 S 03−390985010 S 03−390985011 S 03−390985012 S 03−39102560GB O 03−46102701DB O 03−46102702A O 03−46102702FB O 03−46102702GA O 03−46102732A O 03−46109570A O 03−41109570B O 03−411200004 S 03−241200005 S 03−241200008 S 03−241200009 S 03−241200012 S 03−241200014 S 03−241200020 S 03−241212002 S 03−251212003 S 03−251212006 S 03−251212007 S 03−251212008 S 03−251212010 S 03−251212015 S 03−261216001 S 03−251216003 S 03−251216004 S 03−251216007 S 03−251216008 S 03−251216011 S 03−251216012 S 03−261256001 S 03−381262001 S 03−381264003 S 03−38127160000 O 03−19127160211 O 03−19127160301 O 03−19127200201 O 03−19127200211 O 03−19127200212 O 03−19127200213 O 03−19127200214 O 03−19127200220 O 03−19127200220 O 03−19127200303 O 03−19127240230 O 03−19127240313 O 03−19
Part Number Type Page #127300003 O 03−19127300010 O 03−19127300011 O 03−19127300020 O 03−19127300021 O 03−19127300205 O 03−19127300211 O 03−19127300212 O 03−19127300213 O 03−19127300214 O 03−19127300215 O 03−19127300220 O 03−19127300221 O 03−19127300222 O 03−19127300301 O 03−19127300302 O 03−19127300306 O 03−19127300311 O 03−191284002 S 03−401284003 S 03−401284005 S 03−401284006 S 03−401284007 S 03−401284008 S 03−401284009 S 03−401284010 S 03−401284012 S 03−401284013 S 03−401284014 S 03−401284015 S 03−401285002 S 03−401285005 S 03−401285007 S 03−401285010 S 03−401285011 S 03−401285012 S 03−401285014 S 03−401285015 S 03−401285017 S 03−401285018 S 03−401285019 S 03−401285022 S 03−401299001 S 03−381362430002 O 03−141372430003 O 03−161372430004 O 03−141372430012 O 03−141372430101 O 03−161372430201 O 03−141372430202 O 03−141372430211 O 03−141372430212 O 03−141372430303 O 03−141373030003 O 03−141373030006 O 03−161373030008 O 03−161373030101 O 03−161373036201 O 03−141373036211 O 03−141373036212 O 03−141373036301 O 03−141373036302 O 03−141373036303 O 03−141373636101 O 03−161392430001 O 03−161393030003 O 03−141393030004 O 03−161393030012 O 03−141393030044 O 03−141393030045 O 03−141393030067 O 03−141393030071 O 03−141393030072 O 03−141393030135 O 03−141393030167 O 03−141393030252 O 03−141393030261 O 03−141393030264 O 03−141393030265 O 03−141393030266 O 03−141393030267 O 03−14
Part Number Type Page #1472430001 O 03−171472430002 O 03−171472430011 O 03−171473030002 O 03−171473030003 O 03−181492430001 O 03−171492430007 O 03−171493030002 O 03−171493030003 O 03−181493030025 O 03−171493030027 O 03−171493030079 O 03−171493030080 O 03−171493030082 O 03−171493030095 O 03−171493030167 O 03−1715427 O 03−16160118 O 03−26160279−3 O 03−24160282 O 03−24160367−3 O 03−16160367−4 O 03−16160367−5 O 03−16160367−6 O 03−16160367−7 O 03−16160531 O 03−25160534 O 03−24160623 O 03−16160623−1 O 03−16160623−2 O 03−16160646 O 03−24160690 O 03−24160701 O 03−23160702 O 03−24160704 O 03−23160705 O 03−24160707 O 03−23160730 O 03−26160836 O 03−16160837 O 03−16160870 O 03−26160937 O 03−26160938 O 03−26160942 O 03−26160984 O 03−26160993 O 03−16161104 O 03−16161229 O 03−16162033 O 03−26162041 O 03−21162055 O 03−24162055 O 03−25162080 O 03−16162081 O 03−16162082 O 03−16162549 O 03−26162549 O 03−26162549−1 O 03−26162549−2 O 03−26162959 O 03−26163066 O 03−16163172 O 03−21163261 O 03−26163527 O 03−25163528 O 03−24163542 O 03−16163565 O 03−25163568 O 03−25163700 O 03−26163701 O 03−26163741 O 03−26163751 O 03−16164173 O 03−26164217 O 03−21164245 O 03−26164516 O 03−16164545 O 03−16164566 O 03−16164637 O 03−16164693 O 03−16164697 O 03−16
Part Number Type Page #164705 O 03−16164719 O 03−16164804 O 03−14164860 O 03−16164929 O 03−16164988 O 03−16164989 O 03−16165117 O 03−19165206 O 03−26165224 O 03−26165225 O 03−26165303 O 03−26165308 O 03−25165313 O 03−25165314 O 03−25165399 O 03−18165440 O 03−16165441 O 03−16165568 O 03−26165592 O 03−17165593 O 03−17165616 O 03−26165689 O 03−18165690 O 03−18165691 O 03−18165703 O 03−16165709 O 03−17165710 O 03−17165713 O 03−17165732 O 03−16165849 O 03−21165850 O 03−21165864 O 03−14166029 O 03−14166213 O 03−17166213 O 03−17166214 O 03−17166214 O 03−17166215 O 03−17166215 O 03−17166216 O 03−17166216 O 03−17166218 O 03−17166218 O 03−17166219 O 03−17166219 O 03−17166220 O 03−17166220 O 03−17166221 O 03−19166225 O 03−26166298 O 03−18166299 O 03−18166300 O 03−18166329 O 03−17166330 O 03−17166334 O 03−17166335 O 03−17166338 O 03−17166339 O 03−17166373 O 03−19166414 O 03−2518160 O 03−4519451 O 03−4319461 O 03−4319471 O 03−43200316C O 03−45201043H O 03−47201044E O 03−47201145BA O 03−492W24018 O 03−442X256 O 03−442X257 O 03−443030114 O 03−163062003 O 03−423064004 O 03−423095008 O 03−474031017 O 03−514031021 O 03−514031044 O 03−524031045 O 03−524031047 O 03−51
Type "O" = OEM P/N, Type "S" = Service P/NIf OEM part # is not found on page listed, refer to the MCR for applicable cross reference.
Part Number Index 03−ACTUATORS
03 − 3
Part Number Type Page #4031090 O 03−484031134 O 03−524031161 O 03−524031173 O 03−524031252 O 03−524031334 O 03−524031340 O 03−524040026 O 03−544040533 O 03−484040796 O 03−504740157 O 03−545040383 S 03−525X1051 O 03−43602000MJ O 03−466X102 O 03−437X14 O 03−449965003 O 03−469999036 O 03−419999044 O 03−439999046 O 03−439999060 O 03−419999130 S 03−389999131 S 03−389999143 S 03−389999143 O 03−38BA1 S 03−41CB09 S 03−42CB12 S 03−42CB16 S 03−42CB16LS2 S 03−42CB20 S 03−42CB20S1 S 03−42CB24 S 03−42CB24S1 S 03−42CB30 S 03−42CB30S1 S 03−42CB36S1 S 03−42CC3030 S 03−21CF1 S 03−43CF2 S 03−43CF3 S 03−43CF4 S 03−43CF5 S 03−43CF6 S 03−43CF7 S 03−43CF8 S 03−43CF9 S 03−43CP1 S 03−43CP2 S 03−43CP3030 S 03−21CS2 S 03−43DP09 S 03−45DP12 S 03−45DP16 S 03−45DP16L S 03−45DP20 S 03−45DP20L S 03−45DP24L S 03−45DP24XL S 03−45DP30 S 03−45DP30L S 03−45DP36 S 03−45DS1 S 03−41DS2 S 03−41DS3 S 03−41DS4 S 03−41GC2024 S 03−14GC2424 S 03−14GC2424L S 03−14GC2424LP40 S 03−14GC2430 S 03−14GC2430L S 03−14GC2430XL S 03−14GC3030 S 03−14GC3030CF S 03−14GC3030CFB S 03−14GC3030CFP40 S 03−14GC3030L S 03−14GC3030LP40 S 03−14GC3030LR S 03−14GC3030P40 S 03−14
Part Number Type Page #GC3030R S 03−14GC3030RCF S 03−14GC3030S1 S 03−14GC3036 S 03−14GC3036L S 03−14GC3636 S 03−14GC3636P40 S 03−14GC3636Q S 03−14GP1624 S 03−16GP2024 S 03−16GP2424 S 03−16GP2424L S 03−16GP2430 S 03−16GP2430L S 03−16GP2430XL S 03−16GP3030 S 03−16GP3030K S 03−16GP3030KP40 S 03−16GP3030L S 03−16GP3030LK S 03−16GP3030LKP40 S 03−16GP3030LP40 S 03−16GP3030P40 S 03−16GP3036 S 03−16GP3636 S 03−16HW1 S 03−44HW2 S 03−44HW3 S 03−44HW4 S 03−44HW5 S 03−44HW6 S 03−44HW7 S 03−44HW8 S 03−44KSC24HBBC−175NN O 03−35KSC24HBBC−300NN O 03−35KSC24HBBC−300NN O 03−35KSC24HBBC−800NN O 03−35KSC24HBC−800NN O 03−35KSC24MBBC−800NN O 03−35KSC24MBC−800NN O 03−35KSC30HBBC−175NN O 03−35KSC30HBBC−175NN O 03−36KSC30HBBC−800NN O 03−35KSC30HBC−800NN O 03−35KSC30HBCS45605 O 03−35KSC30HBCS45606 O 03−35KSC30MBBC−800NN O 03−35KSC36HBBC−800NN O 03−35KSC36HBC−225NN O 03−35KSC36HBC−800NN O 03−35KSC36HBCS45623 O 03−35KSC36HBCS45624 O 03−35KSC36MBBC−800NN O 03−35KSC4740621 O 03−42KSC5040538 O 03−52KSC5040563 O 03−52KSC5040567 O 03−48KSC5040580 O 03−48KSC50HBBC−175NN O 03−36KSC50HBBC−800NN O 03−36KSC50HBBC45013 O 03−36KSC50HBBCS45009 O 03−36KSC50HBBCS45009 O 03−36KSH101E O 03−31KSH101ES005 O 03−31KSH101F O 03−31KSH101H O 03−31KSH202C O 03−31KSH5200078 O 03−54KSH5200090 O 03−54KSH5200092 O 03−54KSH5200099 S 03−52KSH5200143 O 03−48KSHR2PT04H00022 O 03−32KSHR2PT04H00025 O 03−32KSM2050GC−800NN O 03−27KSM2050KC−800NN O 03−27KSM2060GC−800NN O 03−27KSM2075GC−175NN O 03−27KSM2075GCS45096 O 03−27KSM2460GC−175NN O 03−28
Part Number Type Page #KSM2460KC−800NN O 03−28KSM2475GC−175NN O 03−28KSM2475GC−800NN O 03−28KSM2475GCS47001 O 03−28KSM2475GCS47002 O 03−28KSM2475KC−800NN O 03−28KSM3060GC−800NN O 03−29KSM3060GCS46155 O 03−29KSM3060GCS46156 O 03−29KSM3060KC−800NN O 03−29KSM3075GC−175NN O 03−29KSM3075GC−800NN O 03−29KSM3075GCS46164 O 03−29KSM3075KC−800NN O 03−29KSM3660GC−175NN O 03−30KSM3660KC−800NN O 03−30KSM3675GC−175NN O 03−30KSM3675GC−800NN O 03−30KSM3675GCS48017 O 03−30KSM3675GCS48030 O 03−30KSM3675GCS48039 O 03−30KSM3675GCS48040 O 03−30KSM3675KC−800NN O 03−30KSM4040894 S 03−48KSM4041173 O 03−48KSM4041177 O 03−48KSMR0PH40−800NN O 03−34KSMR0PH50−800NN O 03−34KSMR0PH75−800NN O 03−34KSMR0PT40−800NN O 03−33KSMR0PT60−800NN O 03−33KSMR1PH50−800NN O 03−34KSMR1PH50−800NN O 03−34KSMR1PH60−800NN O 03−34KSMR1PH60S50022 O 03−34KSMR1PH75−800NN O 03−34KSMR1PH75H800NN O 03−34KSMR1PHS50−800NN O 03−34KSMR1PHS75−800NN O 03−34KSMR1PT40−800NN O 03−33KSMR1PT40H50040 O 03−33KSMR1PT40S50040 O 03−33KSMR1PT50−800NN O 03−33KSMR1PT60−800NN O 03−33KSMR1PT75−800NN O 03−33KSMR2PH50−800NN O 03−34KSMR2PH60−800NN O 03−34KSMR2PH75−800NN O 03−34KSMR2PHS50−800NN O 03−34KSMR2PHS60−800NN O 03−34KSMR2PHS75−800NN O 03−34KSMR2PT50−800NN O 03−33KSMR2PT60−800NN O 03−33KSMR2PT75−500NN O 03−33KSMR2PT75−800NN O 03−33KSMR3PH50−800NN O 03−34KSMR3PH60−800NN O 03−34KSMR3PH75−800NN O 03−34KSMR3PHS50−800NN O 03−34KSMR3PT40−800NN O 03−33KSMR3PT50−800NN O 03−33KSMR3PT50S50123 O 03−33KSMR3PT60−800NN O 03−33KSMR3PT60−800YB O 03−33KSMR3PT75−800NN O 03−33LC2430 S 03−17LC2430L S 03−17LC3030 S 03−17LC3030L S 03−17LC3030LP40 S 03−17LC3030LR S 03−17LC3030P40 S 03−17LC3030R S 03−17LP2430 S 03−18LP2430L S 03−18LP3030 S 03−18LP3030K S 03−18LP3030KP40 S 03−18LP3030L S 03−18LP3030LK S 03−18LP3030LKP40 S 03−18
Part Number Type Page #LP3030P40 S 03−18M4031002 S 03−51M4031002 O 03−51M4031017 S 03−51M4031021 S 03−51M4031021 O 03−51M4031041 S 03−52M4031041 O 03−52M4031043 S 03−48M4031044 S 03−52M4031045 S 03−52M4031046 S 03−51M4031046 O 03−51M4031047 S 03−51M4031047 O 03−51M4031061 S 03−52M4031061 O 03−52M4031070 S 03−51M4031076 S 03−52M4031089 S 03−48M4031089 O 03−48M4031090 S 03−48M4031134 S 03−52M4031134 O 03−52M4031161 S 03−52M4031173 S 03−52M4031251 S 03−52M4031251 O 03−52M4031252 S 03−52M4031295 S 03−51M4031295 O 03−51M4031333 S 03−52M4031334 S 03−52M4031334 O 03−52M4031340 S 03−52M4031340 O 03−52M4031742 S 03−49M4031743 S 03−49M4031744 S 03−49M4036060 S 03−50M4036066 S 03−50M4036067 S 03−50M4036068 S 03−50M4036174 S 03−52M4040025 S 03−54M4040026 S 03−54M4040475 S 03−51M4040527 S 03−48M4040530 S 03−48M4040533 S 03−48M4040596 S 03−48M4040717 S 03−50M4040719 S 03−50M4040754 S 03−52M4040757 S 03−52M4040772 S 03−48M4040796 S 03−50M4040893 S 03−49M4040900 S 03−48M4040997 S 03−52M4041173 S 03−48M4041175 S 03−48M4041177 S 03−48M4041178 S 03−51M4041178 O 03−51M4041302 S 03−48M4041367 S 03−52M4041406 S 03−54M4041502 S 03−52M4631656 S 03−52M4631656 O 03−52M4731745 S 03−52M4731785 S 03−52M4731799 S 03−52M4731804 S 03−52M4731805 S 03−52M4731921 S 03−51M4731922 S 03−51M4731970 S 03−52M4731971 S 03−52M4731974 S 03−52
Type "O" = OEM P/N, Type "S" = Service P/NIf OEM part # is not found on page listed, refer to the MCR for applicable cross reference.
03−ACTUATORS Part Number Index
03 − 4
Part Number Type Page #M4731975 S 03−52M4731986 S 03−50M4736161 S 03−52M4740012 S 03−52M4740102 S 03−50M4740105 S 03−52M4740112 S 03−51M4740157 S 03−54M4740161 S 03−52M4740299 S 03−52M4740313 S 03−52M4740420 S 03−48M4740421 S 03−49M4740432 S 03−48M4940273 S 03−52M5040364 S 03−51M5040367 S 03−52M5040368 S 03−52M5040370 S 03−52M5040370 O 03−52M5040372 S 03−52M5040373 S 03−52M5040377 S 03−51M5040378 S 03−51M5040388 S 03−51M5040390 S 03−51M5040390 O 03−51M5040391 S 03−52M5040392 S 03−52M5040402 S 03−52M5040472 S 03−52M5040486 S 03−52M5040513 S 03−49M5040516 S 03−49M5040524 S 03−52M5040524 O 03−52M5040536 S 03−52M5040538 S 03−52M5040555 S 03−51M5040557 S 03−52M5040563 S 03−52M5040566 S 03−54M5040567 S 03−48M5040567 O 03−48M5040580 S 03−48M5040580 O 03−48M5040585 S 03−52M5200078 S 03−54M5200090 S 03−54M5200092 S 03−54M5200108 S 03−52M5200143 S 03−48M5200173 S 03−54M5200200 S 03−54M5200201 S 03−54MA15500 S 03−31MA15500X S 03−31MA15502 S 03−31MA15502X S 03−31MA15504 S 03−31MA15504X S 03−31MA15509 S 03−32MA15551 S 03−35MA15553 S 03−35MA15555 S 03−35MA15557 S 03−35MA15559 S 03−35MA15561 S 03−35MA15565 S 03−35MA15567 S 03−35MA15569 S 03−35MA15573 S 03−35MA15600 S 03−34MA15601 S 03−34MA15603 S 03−34MA15605 S 03−34MA15606 S 03−34MA15607 S 03−34MA15608 S 03−34MA15609 S 03−34MA15610 S 03−34
Part Number Type Page #MA15612 S 03−34MA15614 S 03−34MA15615 S 03−34MA15616 S 03−34MA15617 S 03−34MA15618 S 03−34MA15619 S 03−34MA15621 S 03−34MA15622 S 03−34MA15623 S 03−34MA15624 S 03−34MA15650 S 03−33MA15652 S 03−33MA15654 S 03−33MA15655 S 03−33MA15656 S 03−33MA15657 S 03−33MA15659 S 03−33MA15660 S 03−33MA15661 S 03−33MA15662 S 03−33MA15663 S 03−33MA15664 S 03−33MA15665 S 03−33MA15666 S 03−33MA15690 S 03−36MA15691 S 03−36MA15703 S 03−37MA15770 S 03−27MA15771 S 03−27MA15771X S 03−27MA15772 S 03−27MA15773 S 03−28MA15774 S 03−28MA15774X S 03−28MA15775 S 03−28MA15775X S 03−28MA15776 S 03−29MA15776X S 03−29MA15777 S 03−29MA15777X S 03−29MA15778 S 03−30MA15778X S 03−30MA15779 S 03−30MA15779X S 03−30MA46141X S 03−29MC3030B S 03−22MC3030CSB S 03−22MP3030B S 03−22MP3030KB S 03−22MQ15708 S 03−54MQ5200180 S 03−52N11257 O 03−43N11257AA O 03−43N13368 O 03−42N14398B O 03−41N20097E O 03−45N20097G O 03−45N20130F O 03−45N20130R O 03−45N20145C O 03−45N20151E O 03−45N20163E O 03−42N20166B O 03−42N20166D O 03−42N20168C O 03−45N4630NE O 03−14N4730AB O 03−14N4730AS O 03−14N4730HF O 03−14N4730HH O 03−14N4830A O 03−16N4830AA O 03−16N4830AD O 03−16N4830B O 03−16N4830CA O 03−16N4830EA O 03−16N4936PA O 03−16PH30 S 03−47PP1 S 03−44PR20 S 03−46
Part Number Type Page #PR24 S 03−46PR24M S 03−46PR30 S 03−46PR30M S 03−46PR30S1 S 03−46PR36 S 03−46PR36S1 S 03−46RN21AD S 03−54RN21AE S 03−54RN21AG O 03−42RS5 S 03−46RS6 S 03−46RS7 S 03−46RT1 S 03−41RT2 S 03−41RT3 S 03−41RTP1 S 03−41RTP2 S 03−41RTP3 S 03−41SBH24L S 03−47SBH24XL S 03−47SBH30 S 03−47SBH30L S 03−47SC09 S 03−19SC12 S 03−19SC16 S 03−19SC16L S 03−19SC20 S 03−19SC20L S 03−19SC24 S 03−19SC24L S 03−19SC24XL S 03−19SC30 S 03−19SC30L S 03−19SC36 S 03−19
Part Number Type Page #
Type "O" = OEM P/N, Type "S" = Service P/NIf OEM part # is not found on page listed, refer to the MCR for applicable cross reference.
Part Number Index 03−ACTUATORS
03 − 5
PURPOSE OF THIS SECTIONThis section is designed as a reference for Haldex Commercial Vehicle Systems new and remanufactured air brake systemcomponents and accessories, sold under the Haldex Maxibrake® and Anchorlok® brand names. Products describedinclude all pertinent information needed to replace an OEM installed component, or to help design an original installation. Ifthere is a service number for a given part, it is noted in the product number table.
DESIGN FLEXIBILITYThe products presented in this section are described by function and usage. Technical data and mounting configurationsare also provided. Throughout this section, reference is made to numerous specific OEM applications. This section is not,however, intended to be a mutually exclusive listing of all part numbers and designs available. Should the need for a designnot presented occur, contact your Haldex Commercial Vehicle Systems sales representative for additional information.
WARRANTY INFORMATIONProper service and repair are important to the safe, reliable operation of any motor vehicle. To prevent personal injuryand/or vehicle damage, careful and cautious service procedures recommended by the vehicle manufacturer should befollowed by anyone servicing a motor vehicle. For details on warranty of Haldex Commercial Vehicle air brake systemcomponents and accessories, refer to L20221 Aftermarket Warranty Policy. For warranty returns, use L90005 WarrantyAdjustment Form. To obtain further information, visit the www.hbsna.com website and click on Terms/Policies button,then on Warranty Returns.
ORDERING PROCEDUREMost customers can place electronic orders on the www.hbsna.com website by obtaining a username and password or byusing EDI. For additional information about electronic orders or to place an order by phone or fax, contact CustomerService in U.S. or Canada at numbers listed below:
U.S. Customer Service: Canada Customer Service:Phone: 800−643−2374 Phone: 800−267−9247Fax: 800−533−1941 Fax: 519−826−9497Mail: Commercial Vehicle Systems
North American Sales DivisionAttn: Customer Service Department10707 NW Airworld DriveKansas City, MO 64153−1297
Mail: Commercial Vehicle SystemsHaldex LimitedCanadian Distribution CentreAttn: Customer Service Department525 Southgate Drive, Unit 1Guelph, Ontario N1G 3W6
IMPORTANT NOTICEThe data listed herein is correct to the best of Haldex Commercial Vehicle Systems knowledge and belief, having beencompiled from reliable and official sources of information. However, HALDEX COMMERCIAL VEHICLE SYSTEMSCANNOT ASSUME ANY RESPONSIBILITY for possible error or misapplication of the product. Final determination of thesuitability of the products for the use contemplated by the Buyer is the sole responsibility of the Buyer. Haldex CommercialVehicle Systems shall have no responsibility in connection with this suitability. It is not our intention to imply that any of thecomponents in this catalog in connection with an engine make or model are made by any engine manufacturer.
Copyright 2003Haldex Commercial Vehicle Systems
10707 N.W. Airworld DriveKansas City, MO 64153−1215
All rights reserved.Materials may only be reproduced with written permission of Haldex Commercial Vehicle Systems.
03−ACTUATORS Foreword
03 − 6
Throughout this section or manual, you will notice the terms NOTE, IMPORTANT, WARNING, andDANGER followed by important product information. So that you may better understand the manual,those terms are defined below. The warns of the possibility of personal injury or death.
NOTE:Is used as a reminder of an instruction where the concern deals with product integrity and has to dowith installation, operation, maintenance or service and care of the product.
IMPORTANT:Used without the safety alert symbol, is used as a reminder of an instruction where theconcerns deal with product integrity and have to do with installation, operation, maintenanceor service and care of the product. It is intended to show that vehicle breakdown and/orexpensive repair could result if the instruction is not followed.
WARNING:Is used with an instruction for the purpose of showing that a safe practice must be adhered toor that an unsafe practice must be avoided, and that if proper precautions are not taken,personal injury could result.
DANGER:Indicates a potentially hazardous situation which, if not avoided, may result in serious injuryor death.
Terms 03−ACTUATORS
03 − 7