0204 Data Backup

8/9/2019 0204 Data Backup

1/15

Data Backup

EPLAN Training 1

Data Backup


2/15

Data Backup

EPLAN Training 2

1 Backing up Projects .....................................................................................3

1.1 Back up projects from the page navigator.................................................3

1.2 Back up projects from the project management........................................4

2 Packing and Unpacking a Project ...............................................................7

2.1 Pack projects in the page navigator..........................................................7

2.2 Pack projects from the project management.............................................8

2.3 Open a packed project..............................................................................9

2.4 Unpack projects ......................................................................................10

3 Exchanging Projects via E-mail.................................................................12

3.1 Send projects from the page navigator ...................................................12

3.2 Send projects from the project management ..........................................13

3.3 Restore projects sent as e-mail...............................................................14

This functionality is only available for certain module packages. Info


3/15

Data Backup

EPLAN Training 3

1 Backing up Projects

Projects can be backed up from the page navigator and from the project

management.

1.1 Back up projects from the page navigator

Precondition:

You have selected a project in the page navigator.

Project > Back up > Project

1. In the Back up projects dialog, enter a descriptive text for the project backupinto the Description field.


4/15

Data Backup

EPLAN Training 4

2. Select whether you wish to save additionally, file-off for external editing, orarchive the project from the Method drop-down list.

3. In the Medium group box, define whether the project is to be backed up to astorage medium or whether it should be sent via e-mail.

4. Additionally, define whether the project is to be completely backed up andwhether external documents and image files should be considered.

5. Click [OK].

The project is backed up to the specified directory or e-mailed, according tothe entries you have made.

Note:

EPLAN notes these settings for each project and offers them again during laterbackups.

1.2 Back up projects from the project management

Preconditions:

• You have set up the project management.

• In the tree structure of project management there is an imported directory with atleast one project.

Project > Management

1. Select the desired projects from the tree structure in the Project management dialog.


5/15

Data Backup

EPLAN Training 5

2. Select Popup menu > Back up.

3. In the Back up projects dialog, define the settings for the backup.

4. Click [OK].


6/15

Data Backup

EPLAN Training 6

The projects are compressed, one after the other, and backed up to thespecified directory (or e-mailed). A progress bar is displayed allowing you tocancel the process.

5. Click [OK] in the window that informs you about the status of the data backup.



7/15

Data Backup

EPLAN Training 7

2 Packing and Unpacking a Project

Projects can be packed either in the page navigator or in the project management.

2.1 Pack projects in the page navigator

Precondition:

You have opened a project.

Page > Navigator

1. Select the desired project.

2. Select the menu item Project > Pack.


8/15

Data Backup

EPLAN Training 8

The packing procedure will commence and a status bar will be displayedwith the option of canceling the process.

3. Click [OK] in the window that informs you about the status of the packing

process.

The packed project is stored in the project directory with an *.elp extension and closed in EPLAN.

2.2 Pack projects from the project management

Preconditions:

• You have set up the project management.

• In the tree structure of project management there is an imported directory with atleast one project.

Project > Management

1. Select the desired projects from the tree structure in the Project management dialog.


9/15

Data Backup

EPLAN Training 9

2. Select Popup menu > Pack.

The packing procedure will commence and a status bar will be displayedwith the option of canceling the process.

3. Click [OK] in the window that informs you about the status of the packingprocess.

The packed projects are stored in the project directory with an *.elp extension. Projects that were open during the packing process are closed.

2.3 Open a packed project

You can open a packed project in the same way as any other project.

Project > Open

1. Select the entry "Packed EPLAN project (*.elp)" in the Files of type field in theOpen project dialog.


10/15

Data Backup

EPLAN Training 10

2. Switch to the directory where the project is stored and select the desiredproject.

3. Click [Open].

The project is unpacked and a status bar is displayed with the option ofcanceling the process. If you have opened the page navigator, then the projectis displayed there.

Tip:

You can also open a packed project by double-clicking on a project with the *.elp file name extension. The project is automatically unpacked and opened.

2.4 Unpack projects

Precondition:

Packed projects exist.

1. Select the menu items Project > Unpack.

In the Open project dialog the file type "Packed EPLAN project (*.elp)" ispreset, so that the packed projects are offered directly.


11/15

Data Backup

EPLAN Training 11

2. Select the desired project in the Open project dialog. If appropriate, change toa different directory.

3. Click [Open].

The project is unpacked, but not opened.

Tip:

In the project management you can unpack a selected packed project by using[Organize] > Unpack.



12/15

Data Backup

EPLAN Training 12

3 Exchanging Projects via E-mail

Warning:In order to exchange e-mails, an e-mail editor must be installed and correctly set upon your computer.

You can only send one project at a time via e-mail. When a project is sent, the projectproperties remain unchanged; the write-protection of a project is also retained. Theinformation that this is a filed off project is also sent.

You can send a project via e-mail from the page navigator or from the project

management.

3.1 Send projects from the page navigator

Preconditions:

• You have selected the desired project in the page navigator.

• Under Options > Settings > User > Data backup > Settings > Defaultsettings you configured the presettings for the Medium "E-mail".

1. Select the menu item Project > Send by e-mail.

The project is split according to the settings into packed files of thespecified size, your installed e-mail editor is opened and the appropriatenumber of e-mails are created.

2. Select the recipient and enter an accompanying text, if necessary.

3. Click [Send].


13/15

Data Backup

EPLAN Training 13

4. In EPLAN click [OK] in the window that informs you about the status of thedata backup.

The project is sent as an attachment - if necessary, split into several mails.

3.2 Send projects from the project management

Preconditions:

• You have opened the project management (Project > Management) andselected the desired projects.

• Under Options > Settings > User > Data backup > Settings > Defaultsettings you configured the presettings for the Medium "E-mail".

1. Select Popup menu > Send by e-mail.

The first selected project is split according to the settings into packed filesof the specified size, your installed e-mail editor is opened, and theappropriate number of e-mails are created.


3. Click [Send].

The project is sent and the next selected project is split according to thesettings into packed files of the specified size, your installed e-mail editor isopened, and the appropriate number of e-mails are created.


5. Click [Send].


14/15

Data Backup

EPLAN Training 14

6. Proceed in a similar way for all additional selected projects.

7. In EPLAN click [OK] in the window that informs you about the status of thedata backup.

3.3 Restore projects sent as e-mail

Precondition:

If the project is split into several e-mails, then the files must all be stored in acommon directory.

1. Double-click the project.

EPLAN is started (if necessary), and the Restore project dialog is opened.

2. Define whether the project is to be restored to the project directory under its

original name or using a new name.If the project is split into several parts, EPLAN recognizes this andautomatically combines the files.


15/15

Data Backup

EPLAN Training 15

0204 Data Backup

Documents

Transcript of 0204 Data Backup