headline_1=1.3 The working environment&var1=Step 1

When you have defined the properties of the project, you are located on the desktop. Here, you can design the circuit program.

The LAD display looks similar.

To continue, click the "Continue" button.&var2=Step 2

The LOGO!Soft Comfort interface is divided up into
- Menu bar
- Toolbar
- Programming desktop
- Info window - Status bar.
You can obtain additional information on the individual items when you move the mouse pointer over the appropriate area. To continue, click the "Continue" button.&var3=Step 3

The Toolbar contains tools for designing the circuit diagrams.

You can hide and show the bar by clicking the button in the top left.

To continue, click the "Continue" button.&var4=Step 4

The Expanded toolbar is shown automatically, if you select

Constants (Co)
Basic functions (GF) or
Special functions (SF)

The available functions are listed for selection, depending on the LOGO! model and the selected block. To continue, click the "Continue" button.&var5=Step 5

The Tooltips function is very useful. If you position the mouse pointer on an icon for a short while, a small window opens, containing a description.

In addition, these functions have a direct link to Help (press the F1 key). If "Tooltips" has not been activated, select "View" from the Menu bar and switch the function on.

You can now close this lesson.&rollover_1=Menu bar

In the Main Menu, all the program functions and options are divided up by category. In the corresponding submenus, you can find various commands to implement the required switching functions.&rollover_2=Toolbar

This contains the most important commands in the form of icons, which can be clicked. This gives you rapid access to these commands.&rollover_3=Programming desktop

This window is the actual workstation. It is here that function and contact circuit diagrams are designed and displayed.&rollover_4=Info window

This displays additional information on the current state of processing.&rollover_5=Status bar

This displays the program status.&textwrong=That is incorrect. Please try again.