01-series REWINDER · 2013. 3. 29. · Options ST58 Table working lamp ST2258 Electronic universal...

2
ST2520-film rewinder - Single motor drive system for fully variable wind speed. - Easy handling by hand or foot control (option ST2259) - Very slow speed for inspection film perforation, damages, cutting/ editing and cleaning film purposes. - Fast winding of 16 and 35mm picture / sound film and 17,5mm sound film inA-wind in both directions. - Universal counter (option ST2258): accurate counting using optional processor counter for 16 / 17,5 and 35mm film or PE film using film driven sprockets, or without sprockets for checking measurements of film length of shrunken or damaged material with and accuracy of less than 0,5%. - Small and easily moveable chassis. - Solvent resistant table top with enough space to work for the operator. - Take-up assemblies for 600 meter / 2000 feet film on (16mm) spools or bobbins or 1000 meter of PE sound film. - Take-ups with film plates to accept bobbins according to DIN 15531 and 16m reels according to DIN 15621. - Illuminated ground glass for controlling individual frames. - Fast and sensitive film transport in both directions. - Automatic stop at film end or when film breaks with warning signal by buzzer. - Dimmer with socket is installed for working lamp (max. 75 watt). - Working lamp optional. - Installed is standard an elapsed hour counter for maintenance. - Transport castors with brakes. Technical data - The maximum speed range is available in both directions. - Fully variable rewinding speed of max. 5 meters per second. (EU regulation). This is for 600 meters / 2000 feet of film is approx. 3 minutes. - Adjustable film tension of the frictions remains steady over full film length. ST 2520 ST 2520 | 3.2013 1 INTRODUCTION TO THE 01-series REWINDER

Transcript of 01-series REWINDER · 2013. 3. 29. · Options ST58 Table working lamp ST2258 Electronic universal...

Page 1: 01-series REWINDER · 2013. 3. 29. · Options ST58 Table working lamp ST2258 Electronic universal processor counter including sprockets for (S)16 – 17,5 – 35mm ST2259 Foot switch

ST2520-film rewinder

- Singlemotordrivesystemforfullyvariablewind

speed.

- Easyhandlingbyhandorfootcontrol(optionST2259)

- Veryslowspeedforinspectionfilmperforation,

damages,cutting/editingandcleaningfilmpurposes.

- Fastwindingof16and35mmpicture/soundfilmand

17,5mmsoundfilminA-windinbothdirections.

- Universalcounter(optionST2258):accuratecounting

usingoptionalprocessorcounterfor16/17,5and

35mmfilmorPEfilmusingfilmdrivensprockets,or

withoutsprocketsforcheckingmeasurementsoffilm

lengthofshrunkenordamagedmaterialwithand

accuracyoflessthan0,5%.

- Smallandeasilymoveablechassis.

- Solventresistanttabletopwithenoughspacetowork

fortheoperator.

- Take-upassembliesfor600meter/2000feetfilmon

(16mm)spoolsorbobbinsor1000meterofPEsound

film.

- Take-upswithfilmplatestoacceptbobbinsaccording

toDIN15531and16mreelsaccordingtoDIN15621.

- Illuminatedgroundglassforcontrollingindividual

frames.

- Fastandsensitivefilmtransportinbothdirections.

- Automaticstopatfilmendorwhenfilmbreakswith

warningsignalbybuzzer.

- Dimmerwithsocketisinstalledforworkinglamp(max.

75watt).

- Workinglampoptional.

- Installedisstandardanelapsedhourcounterfor

maintenance.

- Transportcastorswithbrakes.

Technical data

- Themaximumspeedrangeisavailableinboth

directions.

- Fullyvariablerewindingspeedofmax.5metersper

second.(EUregulation).Thisisfor600meters/2000

feetoffilmisapprox.3minutes.

- Adjustablefilmtensionofthefrictionsremainssteady

overfullfilmlength.

ST 2520

ST 2520 | 3.20131

IntroductIon to the 01-series REWINDER

Page 2: 01-series REWINDER · 2013. 3. 29. · Options ST58 Table working lamp ST2258 Electronic universal processor counter including sprockets for (S)16 – 17,5 – 35mm ST2259 Foot switch

Options

ST58 Tableworkinglamp

ST2258 Electronicuniversalprocessorcounterincludingsprocketsfor(S)16–17,5–35mm

ST2259 Footswitch/control

ST2260 SprocketlesscounterrollerforST2258

Powerrequirements: 220/240Volts–50/60Hz.

Onrequest: 110/110Volts–50/60Hz.

Powerconsumption: approx.600watt.

Tablesize: width107cm–depth70cm–height(bench)81cm–(heightincl.counter97cm)

Weight: approx.60kg.

1080 695

800

Weight: ca. 100 kgWeight: 60 kg. Measurement in mm.

ST 2520 | 3.20132

Keizersveld31

5803AMVenray(Holland)

Email:[email protected]

Tel.:+31(0)478630300

Fax:+31(0)478690007

www.steenbeck.com

Sp

ecif

icat

ion

sar

esu

bje

ctt

oc

han

ge

wit

ho

ut

no

tice

.Im

ages

are

an

exa

mp

le.

More than 60 years of film table precision

Overview with counter accessories ST2660