01 ABRASIVE PRODUCT 3 MACHINIST’S FILE Benefits : • Available in : cut 1 (for rough work, coarse...
Transcript of 01 ABRASIVE PRODUCT 3 MACHINIST’S FILE Benefits : • Available in : cut 1 (for rough work, coarse...
01ABRASIVE PRODUCT01ABRASIVE PRODUCT
From QUALITY BRANDS :
Abrasive and Finishing Product Abrasive and finishing product ...............................................37 Cutting wheel ................................................................................38 Fiber and paper disc ....................................................................38 Flexible depressed centre wheel .............................................38Abrasive Cutting Tool CBN and diamond dresser grinding wheel ................50 – 52 Diamond dresser ..................................................................55 – 59 Standard shapes for diamond and CBN wheel ..........53 – 54 Standard shapes for grinding wheel .............................48 – 49Abrasive for Cast Iron and Steel Depressed center wheel ............................................................39Aerospace Aerospace ...........................................................................................2Burr Tungsten carbide burr .......................................................... 7 – 13Coated Abrasive Tool Fan grinder ......................................................................................23 Polinox ..............................................................................................24Combidisc Combidisc grinding tool ...................................................20 – 21Cut-off Wheels Chopsaw ..........................................................................................31 Cut-off wheel ..........................................................................29 – 31 Cut-off wheel line SG, arbor ......................................................28 Cut-off wheel performance line SG ........................................28 Cut-off wheel PS-forte ................................................................27Cutter HSS rotary cutter ...................................................................13 – 14 Cutter ................................................................................................40Diamond Wheel Diamond wheel ..............................................................................40File Aluminium file ...................................................................................4 Corinox file ..........................................................................................4 Diamond file ......................................................................................7 Machinist’s file ............................................................................3 – 4 Pferd needle file ...............................................................................4 Precision file .......................................................................................5 Special file ...........................................................................................4 Adjustable file, cylinder hone ..................................................42 File set ......................................................................................40 – 42Fine Grinding Abrasive spiral band, drum holder .........................................19Grinding Wheel Conventional grinding wheel ..................................45 – 47, 60 Reinforced grinding wheel .........................................................26Hand Deburrer Car body file .......................................................................................6 Hand deburrer ..................................................................................6Industrial Brush Brushing ...........................................................................................34 Brushing ...........................................................................................36 Cup brush ........................................................................................36 Mounted brush ..............................................................................34 Wheel brush ....................................................................................35 Wheel brush and cup brush.......................................................35Mounted Point Mounted point ...............................................................................15 Mounted point, EN (DIN) series stock range ..............16 – 18Policap Policap tool set ..............................................................................22Polifan Flap Disc Polifan flap disc ....................................................................32 – 34Poliroll Arbors for poliroll ..........................................................................22 Poliroll cartridge roll ....................................................................22 Poliroll tool set ...............................................................................22
Reinforce Grinding Wheel Performance SG..............................................................................25 Special/high performance SGP ...............................................27 Universal line PSF...........................................................................25Wire Brush Cup brush ...............................................................................43 – 44 Wire brush ..............................................................................43 – 44
www.kawanlama.com 1ABRASIVE PRODUCT
AERO
SPAC
E
PFERD Tool for Pipeline Construction
1
ABRASIVE PRODUCT2
1
Service and Security
AEROSPACEAE
ROSP
ACE
Finding the most suitable tool for a specific application problem is anexacting task in view of the complex requirements on hand. PFERD relieson an experienced key account management to develop on-site applicationengineering solutions in conjunction with the user.Joint workshops are held to analyze processes and to develop alternativesolution proposals in an effort to cost reduction through processoptimization.
Objective: To meet and exceed user expectations.
Although PFERD supplies the industry‘s broadest range of toolswith over 6,500 items available ex stock, some highly specializedprocesses do require customized tools to achieve the desiredproductivity. With more than 20,000 customized tools whichare “made to order” – i.e., special products made for a specificapplication – PFERD ensures optimum solutions and best machiningresults at maximum cost efficiency.
In co-operating with its customers, PFERD meets these partners‘ objectives with precision and outstanding reliability through• Excellent tools meeting individual customer needs• Just-in-time delivery• Personalized catalogues• Application recommendations
PFERD quality is EN ISO 9001 certified.
www.kawanlama.com 3ABRASIVE PRODUCT
MACHINIST’S FILE
Benefits :• Available in : cut 1 (for rough work, coarse stock removal), cut 3 (pre finishing, smoothing, refining) • Pferd can supply with or without ergonomic handle. • Application: for surface work, deburring, stock removal on rectangular
geometries. Filing of shapes.
MAC
HIN
IST’
S FI
LE
TypeOrder No. Length
Inch DescriptionBastrad Smooth
1142 PF0000306 PF0000307 4” Square (8.0mm)1142 PF0000308 PF0000309 6” Square (11.0mm)1142 PF0000310 PF0000311 8” Square (15.0mm)1142 PF0000313 PF0000314 10” Square (17.5mm)1142 PF0000316 PFZ000005 12” Square (20.0mm)
SB1142 PF0000366 PF0000367 4” Square w/ Handle (8.0mm)SB1142 PF0000368 PF0000369 6” Square w/ Handle (11.0mm)SB1142 PF0000370 PF0000371 8” Square w/ Handle (15.0mm)SB1142 PF0000372 PF0000373 10” Square w/ Handle (17.5mm)SB1142 PF0000374 PFZ000006 12” Square w/ Handle (20.0mm)
Square File
Features :• For professional use in industry and the crafts• An appropriate steel microstructure, essential for uniform hardness.• Exact shape and uniform cut from tang to tip• Ideal tooth geometries for every application
TypeOrder No. Length
Inch DescriptionBastrad Smooth
1122 PF0000224 PF0000225 4” Flat file (12.0 x 2.5mm)1122 PF0000226 PF0000228 6” Flat file (16.0 x 4.0mm)1122 PF0000229 PF0000230 8” Flat file (20.0 x 5.0mm)1122 PF0000232 PF0000234 10” Flat file (25.0 x 6.0mm)1122 PF0000236 PF0000237 12” Flat file (30.0 x 6.5mm)1122 PF0000239 PFZ000001 14” Flat file (35.0 x 7.5mm)
SB1122 PF0000341 PF0000342 4” Flat file w/ Handle (12.0 x 2.5mm)SB1122 PF0000343 PF0000345 6” Flat file w/ Handle (16.0 x 4.0mm)SB1122 PF0000346 PF0000348 8” Flat file w/Handle (20.0 x 5.0mm)SB1122 PF0000349 PF0000350 10” Flat file w/Handle (25.0 x 6.0mm)SB1122 PF0000351 PF0000352 12” Flat file w/Handle (30.0 x 6.5mm)SB1122 PF0000353 PFZ000002 14” Flat file w/Handle (35.0 x 7.5mm)
Flat File
1122
SB1122
Hand File
TypeOrder No. Length
InchDescription
Bastrad Smooth
1112 PF0001759 PFZ000009 4” Hand File (12.0 x 2.5mm)
1112 PF0001085 PF0000215 6” Hand File (16.0 x 4.0mm)
1112 PF0001301 PF0001179 8” Hand File (20.0 x 5.0mm)
1112 PF0000223 PF0000222 10” Hand File (25.0 x 6.0mm)
1112 PF0001568 PF0001625 12” Hand File (30.0 x 6.5mm)
SB1112 PF0000216 PF0001317 6” Hand File w/Handle (16.0 x 4.0mm)
SB1112 PF0000221 PFZ000010 8” Hand File w/Handle (20.0 x 5.0mm)
1112
SB1112
Half-Round-Pointed File
TypeOrder No. Length
Inch DescriptionBastrad Smooth
1152SP PF0000248 PF0000249 4” Half Round Pointed (10.4 X 2.5mm)1152SP PF0000250 PF0000251 6” Half Round Pointed (16.0 X 4.5mm1152SP PF0000252 PF0000253 8” Half Round Pointed (20.0 X 6.0mm)1152SP PF0000254 PF0000256 10” Half Round Pointed (25.0 X 7.0mm)1152SP PF0000257 PF0000258 12” Half Round Pointed (30.0 X 8.5mm)1152SP PF0000259 PFZ000007 14” Half Round Pointed (35.0 X10.0mm)
SB1152SP PF0000376 PF0000377 4” Half Round Pointed (10.4 X 2.5mmSB1152SP PF0000378 PF0000379 6” Half Round Pointed (16.0 X 4.5mm)SB1152SP PF0000380 PF0000381 8” Half Round Pointed (20.0 X 6.0mm)SB1152SP PF0000382 PF0000383 10” Half Round Pointed (25.0 X 7.0mm)SB1152SP PF0000384 PF0000385 12” Half Round Pointed (30.0 X 8.5mm)SB1152SP PF0000386 PFZ000008 14” Half Round Pointed (35.0 X10.0mm)
1152SP
SB1152SP
Three Square File
TypeOrder No. Length
Inch DescriptionBastrad Smooth
1132 PF0000297 PF0000298 4” Three Square (8.0mm)1132 PF0000299 PF0000300 6” Three Square (11.0mm)1132 PF0000301 PF0001422 8” Three Square (15.0mm)1132 PF0000302 PF0001623 10” Three Square (17.5mm)1132 PF0000304 PFZ000003 12” Three Square (20.0mm)
SB1132 PF0000355 PF0000356 4” Three Square w/Handle (8.0mm)SB1132 PF0000357 PF0000358 6” Three Square w/Handle (11.0mm)SB1132 PF0000359 PF0000360 8” Three Square w/Handle (15.0mm)SB1132 PF0000361 PF0000363 10” Three Square w/Handle (17.5mm)SB1132 PF0000364 PFZ000004 12” Three Square w/Handle (20.0mm)
1152SP
SB1152SP
Round File
TypeOrder No. Length
Inch DescriptionBastrad Smooth
1162 PF0000319 PF0000320 4” Round (4.0mm)1162 PF0000321 PF0000322 6” Round (6.0mm)1162 PF0000323 PF0000324 8” Round (7.5mm)1162 PF0000325 PF0000327 10” Round (9.5mm)1162 PF0000328 PF0000329 12” Round (12.0mm)1162 PF0000330 PFZ000011 14” Round (15.0mm)
SB1162 PF0000398 PF0000399 4” Round (4.0mm)SB1162 PF0000400 PF0000401 6” Round (6.0mm)SB1162 PF0000402 PF0000403 8” Round (7.5mm)SB1162 PF0000404 PF0000405 10” Round (9.5mm)SB1162 PF0000406 PF0000407 12” Round (12.0mm)SB1162 PF0000408 PFZ000012 14” Round (15.0mm)
SB = file with this cut is also available with ergonomic handle in a self-service pack Please place the letters “sb” before the order number, e.G. Sb1132, 150mm, bastrad.
1
ABRASIVE PRODUCT4
1
PFERD NEEDLE FILE Pferd Hand Needle File
Order No. Type Length (mm) DescriptionPF0001385 2401 140 Hand Needle Files, Cut 1PF0001180 2401 140 Hand Needle Files, Cut 2PF0001998 2401 200 Hand Needle Files, Cut 0PF0001999 2401 200 Hand Needle Files, Cut 2
MACHINIST’S FILESP
ECIA
L FI
LE
Box of Needle File
Box contains : 12 needle files• Flat• Hand• Crossing• Three square• Square• Round
• Knife• Half round• Barrette• Flat with round edges• Hand with round edges• Crossing oval
Order no. Type Length (mm) DescriptionPF0000424 NFB 2492 140 Needle file set 140 mm cut 1PF0001331 NFB 2493 160 Needle file set 160 mm cut 1
Machinist’s Files In Plastic Pouch
Order no. Type Length (mm) DescriptionPF0001722 542WR 250 Machinist file set #2 (5)
Contents :Five assorted shapes
each file comes with matching ergonomic handle
Application for :• Deburring,• Shapping and refining of round holes• Filling of rectangular geometries• Filling on internal radius profiles
Order no. Type Length (mm) DescriptionPF0001814 266/14 140 Needle file set 140 mm cut 1PF0000334 266/16 160 Needle file set 160 mm cut 1PF0000335 266/18 180 Needle file set 180 mm cut 0PF0000336 266/20 200 Needle file set 200 mm cut 0
Pouch contains : 12 needle files• Flat• Hand• Crossing• Three square• Square• Round
• Knife• Half round• Barrette• Flat with round edges• Hand with round edges• Crossing oval
Needle File Set in Pouche
Features :CORINOX files have an exceptional surface hardness of 1200HV (Vickers scale).
Benefits :Suitable for use on difficult-to-file materials such as high-garde steels (high-temperature steel, rare alloys), fibre-reinforced plastics.
Knife File
TypeOrder No. Length
Inch DescriptionBastrad Smooth
1172 PFZ000013 PF0000289 6” Knife File (16.0x5.2x1.25mm)1172 PF0000290 PF0000291 8” Knife File (20.0x6.4x1.5mm)1172 PF0000292 PFZ000015 10” Knife File (25x7.9x1.75mm)
SB1172 PFZ000014 PF0000411 6” Knife File w/Handle (16.0x5.2x1.25mm)SB1172 PF0000412 PF0000413 8” Knife File w/Handle (20.0x6.4x1.5mm)SB1172 PF0000414 PFZ000016 10” Knife File w/Handle (25x7.9x1.75mm)
Order No. Type Length Inch DescriptionPF0001440 1612W 12” Hand File (30.0 x 6.5mm), Cut 0
ALUMINUM FILEHand File
Order No. Type Length Inch DescriptionPF0001714 1612DE 10” Hand File (25.0 x 6.0mm), Cut 1
Lathe FileSPECIAL FILE
Corinox Pottance files hand
CORINOX FILE
Type Length(mm)
Swiss Cuts Cross Section
(mm)Mathing Handle00 0 2
COR 800 150 PFZ000017 PFZ000020 PFZ000023 18 x 4 FH 3 12COR 800 200 PFZ000018 PFZ000021 PFZ000024 22 x 5 FH 4/1 12COR 800 250 PFZ000019 PFZ000022 PFZ000025 25 x 6 FH 4/1 12
CORINOX Needle Files
Type Length(mm)
Swiss Cuts Shank Dia.(mm)00 0
CORINOX 2306 180 PFZ000026 PFZ000032 4.0 12CORINOX 2301 180 PFZ000027 PFZ000033 4.0 12CORINOX 2307 180 PFZ000028 PFZ000034 4.0 12CORINOX 2308 180 PFZ000029 PFZ000035 4.0 12CORINOX 2310 180 PFZ000030 PFZ000036 4.0 12CORINOX 2302 180 PFZ000031 PFZ000037 4.0 12
Workpiece materials:• High grade steels• Stainless steel• Heat resisting alloys• Fibre-reinforced plastic
Industry Group:• Tool and mouldmaking• Patternmaking• Turbine Production/maintenance• Aircraft construction
2306
2301
2307
2308
2310
2302
www.kawanlama.com 5ABRASIVE PRODUCT
PREC
ISIO
N F
ILE
PRECISION FILERiffler File
Length 150mm, smallest type of riffler filesRecommendation for use : Riffler files can be used with or without riffler file holder
900P
901P
910P
911P
913P
914P
916P
915P
917P
918P
920P
930P
931P
940P
941P
942P
943P
943P
Order No. Length (mm) Length (Inch)
Swiss CutsCross - Section
(mm) Suitable Holder2 4
EAN 4007220
900p 150 6” 346075 346082 3,2x3,2 RFH150 12 0,110
901p 150 6” 014950 014967 4,0x1,3 RFH150 12 0,110
910p 150 6” - 346099 2,3x1,2 RFH150 12 0,110
911p 150 6” 014974 014981 2,3x1,2 RFH150 12 0,110
913p 150 6” 014998 015001 2,7x1.5 RFH150 12 0,110
914p 150 6” 015018 015025 3,5x3,5 RFH150 12 0,110
915p 150 6” 346105 - 3,5x3,5 RFH150 12 0,110
916p 150 6” 015032 - 3,2x3,2 RFH150 12 0,110
917p 150 6” 015056 015063 3,2x3,2 RFH150 12 0,110
918p 150 6” 015070 015087 3,8x1,7 RFH150 12 0,110
920p 150 6” 346112 - 4,9x1,5 RFH150 12 0,110
930p 150 6” 015094 015100 3,2x3,2 RFH150 12 0,110
931p 150 6” 346129 - 1,7x1,7 RFH150 12 0,110
940p 150 6” 346136 - 1,7 RFH150 12 0,110
941p 150 6” 346143 - 2,2 RFH150 12 0,110
942p 150 6” 015117 015124 2,6 RFH150 12 0,110
943p 150 6” 346150 398708 3,0 RFH150 12 0,110
952p 150 6” 015131 015148 1,4x4,2 RFH150 12 0,110
kg
Your #1 source for ...
22SectionSection
Welding Equipment
1
ABRASIVE PRODUCT6
1
Car Body File Blade
CAR BODY FILE
Order No. Type Length (mm) DescriptionPF0000318 299b 300 Car Body Files 300mm #1PF0001187 299b 350 Car Body Files 300mm #00PF0001188 299b 350 Car Body Files 300mm #0PF0000213 299b 350 Car Body Files 300mm #2PF0000214 299b 350 Car Body Files 300mm #3
Cut 00Extra Coarse
Cut 0Very Coarse
Cut 1Coarse
Cut 2Medium
Cut 3Fine
Special Cut
Adjustable Holder for Car Body File
Order No. Type Suitable for File Length (mm) Description
PF0000429 BH125/350 350 Adjustable Holder 14” f/Car Body File
Features :• Positive rake angle• Uniquely convex surface• Unsurpassed sharpness of teeth.Benefits :• Application : these files are ideal for any type of sheet metal work.• Requiring a particularly smooth and scratch - free finish.• Since the file leaves no scratch marks, the filed surface can be painted
immediately without any prior polishing.
HAN
D D
EBU
RRER
Hand Deburrer
HAND DEBURRERIdeally suited for economic and different deburring, chamfering and refining of different materials and contours. Hard-to-reach places, holes, inner and outer diameters, threads and keyways can be easily worked on manually.
The three different, easily-changeable deburrers (blades, mini-blades and countersink) are easy to guide and use with the special holder. The tools fit beautifully to the counters of workpieces. The pivot-mounted adapter system makes handling and changing the deburring device very easy.
The handy, ergonomic design of the flexible plastic holder and the tough, hard inner part protects against sharp edges and corners during work. The angular collar prevents the deburring device rolling away, thus providing maximum safety.
Pferd has the following on offer:• Three deburring blades for work on : - Steel, aluminium - Non-ferrous metals and cast iron, - Plastics and other hard materials• One mini-blade for general work on very small geometrics of different materials• Two pivot-bearing deburring countersinkss for general use on bores of different materials
BS 1010
BS 1018
BS 2010
BD 5010
BC 1041
BC 1651
Order No. EAN 4007220 Use for
Holder for Deburrer
H4 807897 All Types 1 0,15
Deburring Blade
BS 1010 807903 Steel Aluminium 10 0,035
BS 1018 807910 Plastics, other hard materials 10 0,035
BS 2010 807927 Non-ferrous metals, cast iron 10 0,035
Mini-Blades
BD 5010 807934 General Use 1 0,007
Deburring Countersink
BC 1041 807941 General Use 1 0,017
BC 1651 807958 General Use 1 0,033
kg
www.kawanlama.com 7ABRASIVE PRODUCT
CAR
BODY
FIL
E AN
D D
IAM
ON
D F
ILEDIAMOND FILE
Diamond Files
DF 1112 hand
DF 1132 three square
DF 1132 three square
DF 1142 square
DF 1152 half round
DF 1152 half round
DF 1162 round
Features :Apply only slight pressure to the file, especially in workpiece edge areasUse a coarse grit for roughing, medium grit for general purpose filing, and fine grit for finishing applications.Grit sizes are stated according to the FEPA grading scale.
Benefits :Advantages of electroplated diamond tools• The abrasive grains project well out of the bond, leaving large chips
spaces which prevent tool loading even at removal rates• Sharp, super hard abrasive particles ensure maximum cutting performance
without undesirable heat build-up• Tools are coated with just a single layer of abrasive grains. They are there
fore cheaper than other diamond and CBS tools, which makes them suitable for processing smaller batch sizes
Order No. Type Length (mm) Description
PF0001815 DF1112 100 Diamond File D126
PF0001816 DF1112 125 Diamond File D126
PF0001346 DF1112 150 Diamond File D126
PF0001240 DF1112 200 Diamond File D151
PF0001241 DF1132 100 Diamond File D126
Order no. Type Length (mm) Description
PF0001230 DF1142 200 Diamond File D151
PF0001231 DF1152 100 Diamond File D126
PF0001915 DF1152 200 Diamond File D151
PF0001232 DF1162 200 Diamond File D151
Set of Diamond Needle FilesContents DF4205: 1 file each of the following:DF4112 (hand)DF4132 (three square)DF4142 (square)DF4152 (half round)DF4162 (round)Available in D 91, D126, D181 grit
Order No. Type Length (mm) Description
PF0001514 DF4205 140 Set of Diamond Needle File D91
PF0000426 DF4205 140 Set of Diamond Needle File D126
PF0001966 DF4205 140 Set of Diamond Needle File D181
Set of Diamond Riffler Files
Order No. Type Length (mm) Description
PF0001234 DF1624 150 Set of Diamond Riffler File D126
Contents : 1 file each of the following:DF16 (crossing)DF18 (flat)DF20 (square)
DF22 (Three square)DF24 (round)Available in D 126 grit
TUNGSTEN CARBIDE BURRTungsten Carbide Miniature Burrs with 3mm Shank
Order No. PF0001065 PF0001070 PF0000079 PF0000081 PF0001437 PF0001071 PF0001438 PF0000084 PF0001464 PF0000129
Type ZYA-S 0210/3 ZYA 0210/3 ZYA-S 0313/3 ZYA 0313/3 ZYA-S 0607/3 ZYA 0607/3 ZYA-S 0613/3 ZYA 0613/3 HM 3B 0307/3 HM 3B 0613/3
Available Cuts 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P
Head Dia. x Head Length (mm)
2 x 10 2 x 10 3 x 13 6 x 7 6 x 7 6 x 13 6 x 13 6 x 13 3 x 7 6 x 13
Shaft Dia. x Overall Length (mm)
3 x 40 3 x 40 3 x 43 3 x 43 3 x 37 3 x 37 3 x 43 3 x 43 3 x 37 3 x 43
Features :Tungsten Carbide burrs are designed for machining material of virtuallity any strength.Their superior performance reflects an optimum combination of key parameter such as shape number of flutes, spiral angle, rake angle and concentricity.
Benefits :• Ensures an improved protection of operator safety and health.• Reduces power tool wear• Provides smooth operating behaviour• Prevents chatter marks
1
ABRASIVE PRODUCT8
1
TUN
GST
EN C
ARB
IDE
BURR
Order No. PF0001072 PF0000089 PF0001439 PF0001434 PF0001488 PF0001667 PF0002074 PF0001909 PF0000095 PF0001940
Type WRC 0210/3 WRC 0313/3 WRC 0613/3 WKN S0307/3 WKN 0307/3 WKN-S 0607/3 WKN 0607/3 KUD 0302/3 KUD 0403/3 KUD 0605/3
Available Cuts 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P
Head Dia. x Head Length (mm) 2 x 10 3 x 13 6 x 13 3 x 78o
3 x 78o
6 x 710o
6 x 710o 3 x 2 4 x 3 6 x 5
Shaft Dia. x Overall Length (mm) 3 x 40 3 x 43 3 x 43 3 x 37 3 x 37 3 x 37 3 x 37 3 x 33 3 x 34 3 x 35
Order No. PF0000098 PF0000100 PF0000102 PF0000104 PF0001392 PF0001435 PF0000105 PF0000107 PF0001285 PF0001554
Type SKM 0307/3 SKM 0311/3 SKM 0613/3 RBF 0307/3 RBF 0613/3 SPG 0307/3 SPG 0313/3 SPG 0613/3 TRE 0307/3 TRE 0610/3
Available Cuts 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P
Head Dia. x Head Length (mm) 2 x 1022o
3 x 1314o
6 x 1326o 3 x 7 3 x 7 6 x 7 6 x 7 3 x 2 4 x 3 6 x 5
Shaft Dia. x Overall Length (mm) 3 x 37 3 x 41 3 x 43 3 x 37 3 x 43 3 x 37 3 x 43 3 x 43 3 x 37 3 x 40
Set of Tungsten Carbide Miniature Burr
Contents : 15 tungsten carb. min. burrs
1 burr each of the following types:ZYA 0210/3 SPG 0307/3ZYA 0213/3 TRE 0307/3ZYA 0607/3 TRE 0610/3ZYA 0613/3 KUD 0403/3HM 3 B0307/3 SKM 0613/3WRC 0210/3 RBF 0307/3WRC 0313/3 RBF 0613/3WKN 0307/3
Order No. Type Shank Dia. (mm) DescriptionPF0001470 1501 HM 3 Set of Tungsten Carbide Miniature Burrs 15pcs
Standard Shape
Order No. Type Shank Dia.(mm) d2
Available Cut
Head Dia. x Length(mm) d1 x I2
Overall Length(mm) I1
PF0001854 ZYA 0413 6 3 PLUS 4 x 13 55
PF0001751 ZYA 0616 6 3 PLUS 6 x 16 55
PF0000123 ZYA 0820 6 3 PLUS 8 x 20 60
PF0001077 ZYA 1020 6 3 PLUS 10 x 20 60
PF0000116 ZYA 1025 6 3 PLUS 10 x 25 65
PF0000117 ZYA 1225 6 3 PLUS 12 x 25 65
PF0001195 ZYA 1625 6 3 PLUS 16 x 25 65
Cylindrical ZYA without end cutd1
l2
l1
d2
TUNGSTEN CARBIDE BURRTungsten Carbide Miniature Burr with 3mm Shank
www.kawanlama.com 9ABRASIVE PRODUCT
TUN
GST
EN C
ARB
IDE
BURR
TUNGSTEN CARBIDE BURR
Order No. Type Shank Dia.(mm) d2
Available Cut
Head Dia. x Length(mm) d1 x I2
Overall Length(mm) I1
PF0001743 ZYAS 0413 6 3 PLUS 4 x 13 55
PF0000121 ZYAS 0616 6 3 PLUS 6 x 16 55
PF0000122 ZYAS 0820 6 3 PLUS 8 x 20 60
PF0000124 ZYAS 1030 6 3 PLUS 10 x 13 53
PF0000115 ZYAS 1020 6 3 PLUS 10 x 20 60
PF0001876 ZYAS 1025 6 3 PLUS 10 x 25 65
PF0000128 ZYAS 1225 6 3 PLUS 12 x 25 65
PF0001552 ZYAS 1625 6 3 PLUS 16 x 25 65
Cylindrical ZYA-S with end cut
d1
l2
l1
d2
Order No. Type Shank Dia.(mm) d2
Available Cut
Head Dia. x Length(mm) d1 x I2
Overall Length(mm) I1
PF0000130 HM B 0820 6 3 PLUS 8 x 20 60PF0000131 HM B 1230 6 3 PLUS 12 x 30 70PF0001190 HM B 1635 6 3 PLUS 16 x 35 75
Flame Shape B d1
l2
l1
d2
Ball Shape KUDd1
l2
l1
d2
Order No. Type Shank Dia.(mm) d2
Available Cut
Head Dia. x Length(mm) d1 x I2
Overall Length(mm) I1
PF0000144 KUD 0403 6 3 PLUS 4 x 3.6 45
PF0000145 KUD 0605 6 3 PLUS 6 x 5.4 45
PF0000146 KUD 0807 6 3 PLUS 8 x 7.0 47
PF0000147 KUD 1009 6 3 PLUS 10 x 9.0 49
PF0001792 KUD 1210 6 3 PLUS 12 x 10.8 50
PF0000149 KUD 1614 6 3 PLUS 16 x 14.3 54
PF0000150 KUD 2018 6 3 PLUS 20 x 18 58
Cylindrical Radius End WRCOrder No. Type Shank Dia.
(mm) d2Available
CutHead Dia. x Length
(mm) d1 x I2Overall Length(mm) I1
PF0001196 WRC 0413 6 3 PLUS 4 x 13 55
PF0000136 WRC 0616 6 3 PLUS 6 x 16 55
PF0000139 WRC 0820 6 3 PLUS 8 x 20 60
PF0000141 WRC 1020 6 3 PLUS 10 x 20 60
PF0000142 WRC 1025 6 3 PLUS 10 x 25 65
PF0000143 WRC 1225 6 3 PLUS 12 x 25 65
PF0000137 WRC 1625 6 3 PLUS 16 x 25 65
d1
l2
l1
Standard Shape
1
ABRASIVE PRODUCT10
1
TUNGSTEN CARBIDE BURRStandard Shape
Order No. Type Shank Dia.(mm) d2
Available Cut
Head Dia. x Length(mm) d1 x I2
Overall Length(mm) I1
PF0000166 SPG 0618 6 3 PLUS 6 x 18 55
PF0000167 SPG 1020 6 3 PLUS 10 x 20 60
PF0000941 SPG 1020 8 3 PLUS 10 x 20 60
PF0000168 SPG 1225 6 3 PLUS 12 x 25 65
PF0001611 SPG 1225 8 3 12 x 25 65
PF0001081 SPG 1230 6 3 PLUS 12 x 30 70
PF0001776 SPG 1230 8 3 PLUS 12 x 30 70
PFZ000038 SPG 1630 6 3 PLUS 16 x 30 70
PFZ000039 SPG 1630 8 3 PLUS 16 x 30 70
Point Tree Shape SPG
TUN
GST
EN C
ARB
IDE
BURR
d1
l2
l1
d2
Conical SKM d1
l2
l1
d2
Conical Cone KSJ + KSK d1
l2
l1
d2
∝
Order No. Type Shank Dia.(mm) d2
Available Cut
Head Dia. x Length(mm) d1 x I2
Angle α
Overall Length(mm) I1
PF0001118 SKM 0618 6 3 PLUS 6 x 18 18o 55
PFZ000040 SKM 0618 6 3 6 x 18 18o 55
PF0000152 SKM 1020 6 3 PLUS 10 x 20 28o 60
PFZ000041 SKM 1020 6 3 10 x 20 28o 60
PF0000110 SKM 1225 6 3 PLUS 12 x 25 26o 65
PFZ000042 SKM 1225 6 3 12 x 25 26o 65
Order No. Type Shank Dia.(mm) d2
Available Cut
Head Dia. x Length
(mm) d1 x I2
Radius(mm)
Overall Length(mm) I1
PF0000159 RBF 0618 6 3 PLUS 6 x 18 1.5 55
PF0000160 RBF 0820 6 3 PLUS 8 x 20 1.2 60
PF0000161 RBF 1020 6 3 PLUS 10 x 20 2.5 60
PFZ000044 RBF 1020 6 3 10 x 20 2.5 60
PF0000162 RBF 1225 6 3 PLUS 12 x 25 2.5 65
PFZ000045 RBF 1225 6 ALU 12 x 25 2.5 65
PF0002063 RBF 1225 8 3 PLUS 12 x 25 2.5 65
PF0000164 RBF 1 630 6 3 PLUS 16 x 30 3.6 70
Tree with Radius End RBFd1
l2
l1
d2
r
Order No. Type Shank Dia.(mm) d2
Available Cut
Head Dia. x Length(mm) d1 x I2
Angle α
Overall Length(mm) I1
PF0002032 KSJ 0605 6 3 6 x 5 60o 50
PFZ000043 KSJ 0603 6 3 6 x 3 60o 50
PF0000153 KSJ 1008 6 3 10 x 13 60o 53
PF0000154 KSK 1005 6 3 10 x 10 90o 50
PF0000156 KSJ 1613 6 3 16 x 13 60o 56
PF0000157 KSK 1608 6 3 16 x 8 90o 53
Order No. Type Shank Dia.(mm) d2
Available Cut
Head Dia. x Length
(mm) d1 x I2
Radius(mm)
Overall Length(mm) I1
PF0000172 KEL 1020 6 3 PLUS 10 x 20 2.9 60
PFZ000046 KEL 1020 6 ALU PLUS 10 x 20 2.9 60
PFZ000047 KEL 1020 6 3 10 x 20 2.9 60
PF0000173 KEL 1225 6 3 PLUS 12 x 25 3.3 65
PF0000174 KEL 1230 6 3 PLUS 12 x 30 2.6 70
PFZ000048 KEL 1230 6 ALU 12 x 30 2.6 70
PFZ000049 KEL 1230 6 1 12 x 30 2.6 70
PF0000175 KEL 1630 6 3 PLUS 16 x 30 4.8 70
Conical with Radius End KEL
d1
l2
l1
d2
www.kawanlama.com 11ABRASIVE PRODUCT
TUN
GST
EN C
ARB
IDE
BURR
Order No. Type Shank Dia.(mm) d2
Available Cut
Head Dia. x Length
d1 x I2 (mm)
Radius(mm)
Overall LengthI1 (mm)
PF0001463 TRE 0610 6 3 PLUS 6 x 10 2.8 50
PF0001602 TRE 0813 6 3 PLUS 8 x 13 3.7 53
PF0000178 TRE 1016 6 3 PLUS 10 x 16 4.0 56
PF0000179 TRE 1220 6 3 PLUS 12 x 20 5.0 60
PF0000180 TRE 1625 6 3 PLUS 16 x 25 6.5 65
Oval TRE
TUNGSTEN CARBIDE BURRStandard Shape
Set of H.S.S Rotary Cutter• Set 82 H.S.S
Contents : 10 H.S.S. rotary cutter1 each of the following types:HSS W 1220 HSS A 1625 HSS A 1013 ST HSS K 1630 HSS L 1020 HSS L 1630HSS 45 HSS O 1625 HSS G 1020 HSS F 1614
Order No. Type Shank Dia. (mm) Available CutPF0001064 82 HSS 6 3
Set of H.S.S Rotary Cutter• Set 81 H.S.S
Contents : 10 H.S.S. rotary cutters1 each of the following types:HSS A 1225 ST HSS C 1225HSS A 0616 ST HSS A 1013 STHSS K 0618 HSS L 1630HSS C 0616 HSS K 1630HSS K 1230 HSS F 1210
Order No. Type Shank Dia. (mm) Available CutPF0001619 81 HSS 6 3
Set of tungsten carbide burr This PFERD set of tungsten carbide burrs includes the most common shapes and dimensions. It thus covers the most widespread applications and requirements.
Contens : 22 tungsten carbide burrs one each of the following (cut 5, 3mm shank dia.):ZYA-S 0210 ZYA-S 0313 WRC 0210 WRC 0313 WKN 0307 TRE 0307 RBF 0307 SPG 0307
One each of the following (cut 3 PLUS, 6mm shank dia.): ZYA-S 0616 ZYA-S 1013 ZYA-S 1225 WRC 0616 WRC 1225 SKM 0618SKM 1020 KUD 0605 KUD 0807KUD 1210 KUD 1614 SPG 0618SPG 1020 SPG 1225
Order No. Type Available Cut
PF0001107 1500 HM See above 1
The metal box keeps these tools clean, protected, and always neatly arranged.
The plastic box with transparent cover keeps these tools clean, protected, and always neatly arranged.
d1
l2
l1
d2
TC Burr Set
Order No.Cut
EAN 4007220Shank Ø6mm
1506HM 801017 1 248
g
Contents : 5 tungsten carbide burrs,shank dia. 6mm:1 piece each :ZYA 0616/6 C3 PlusKUD 0605/6 C3 PlusWRC 0616/6 C3 PlusSPG 0618/6 C3 PlusRBF 0618/6 C3 Plus
TC Burr Set
Contents : 5 tungsten carbide burrs,shank dia. 6mm:1 piece each :ZYA 1225/6 C3 PlusKUD 1210/6 C3 PlusWRC 1225/6 C3 PlusSPG 1225/6 C3 PlusRBF 1225/6 C3 Plus
Order No.Cut
EAN 4007220Shank Ø6mm
1506HM 801017 1 248
g
1
ABRASIVE PRODUCT12
1
BURR
TUNGSTEN CARBIDE BURRTC Burrs HICOAT
Advantages :• Effective chip discharge due to improved
anti-adhesion characteristics• Low thermal loads• More effective production by working at
higher speed• Longer tool life
Coating HC-HT for high temperature resistant materials :• Mainly used for high temperature resistant
non-ferrouos metals• Low fiction values, low heat build-up• Good combination of wear and oxidisation
resistance. Result: reduced chemical wear
Coating HC-NFE for aluminium and non-ferrous metals :• Mainly used for long-chipping and cloying non-ferrous metals• Highest standar of stock removal and tool life• Improved anti-friction and anti-adhesion
characteristics
Coating HC-E for ironand steel materials :• Multi-purpose coating for steel and cast iron• High wear resistance• High resistance against thermal changes• Tough coating
Coating HC-E for iron and steel materials
Coating HC-HT forhigh temperature
resistant materials
Coating HC-NFE for aluminium and
non-ferrous metals
Note :• Normally, all tungsten burrs are available with coatings• Please ask about alternative models and coatings
Recommended rotational speed range• To determine the recommended cutting speed (m/mm), please
proceed as follows : 1. Select the material group that is to be machined 2. Determine the type of application 3. Select the cut 4. Establish the cutting speed range 5. Select the required burr diameter 6. The cutting speed range and the burr diameter determine the recommended rotational speed range (rpm)
To determine the recommended rotational speed (rpm),please proceed as follows
Material Groups Application Cut Coating Cutting Speed
Steel, Cast Steel
Non-hardened, non-heat treated steels up to 1200N/mm2 (<38HRC)
Construction steels, carbon steels tool steels, non-alloyed steels, case-hardened steels, cast steels Coarse machining =
high stock removal
3 plus HC-FE 450- 600m/min²
Hardened, heat-treated steels exceeding 1200N/mm2 (<38HRC)
Tool steels, tempering steels, alloyed steels, cast steels HC-FE 250-350m/min²
Non-Ferrous Metals
Soft non-ferrous metals Alu-alloys, brass, copper, zinc
Coarse machining = high stock removal
ALU HC-NFE600-1.100m/min²
Fine machining = low stock removal 900-1.100m/min²
High-temperature resistant materials
Nickel based alloys, cobalt based alloys (aircraft engine and turbine construction)
Coarse machining =high stock removal 4 HC-HT 300-450m/min²
Cast Iron Grey cast iron, white cast iron
Cast iron with flake graphite EN-GJL, with nodular graph-ite cast iron EN-GJS, white annealed cast iron EN-GJMW, black cast iron EN-GJMB
Coarse machining =high stock removal 3 plus HC-FE 450-600m/min²
Example :Tungsten carbide burr, cut 3 plus,diameter : 12mm.Coarse machining of non-hardened, non-heat-treated steels.Cutting speed : 450-600m/minRotational speed : 12.000 - 16.000rpm
Dia(mm)
Cutting Speed (m/min)
250 300 350 450 600 900 1.100
Rotational Speed (rpm)
3 27.000 32.000 37.000 48.000 64.000 95.000 117.000
6 13.000 16.000 19.000 24.000 32.000 48.000 59.000
8 10.000 10.000 12.000 14.000 19.000 29.000 35.000
10 8.000 10.000 12.000 14.000 19.000 29.000 35.000
12 7.000 8.000 9.000 12.000 16.000 24.000 29.000
www.kawanlama.com 13ABRASIVE PRODUCT
TUNGSTEN CARBIDE BURRTC Burrs HICOAT® -Coating HC-FE
BURR
S A
ND
CU
TTER
TypeCut 3 PLUS
Coating Coating Colour
Shank Dia. d₂
(mm)
Burr Dia. x Length d₁ x l₂ (mm)
Overall Length
l₁ (mm)
Radiusr
(mm)EAN 400720Shank ø 6mm
ZYA 0616/6 533291 HC-FE Gold 6 6x16 55 - 1 23ZYA 1225/6 533307 HC-FE Gold 6 12x25 65 - 1 60WRC 0616/6 533239 HC-FE Gold 6 6x16 55 - 1 22WRC 1225/6 533246 HC-FE Gold 6 12x25 65 - 1 57KUD 0807/6 533123 HC-FE Gold 6 8x7 47 - 1 14KUD 1009/6 533130 HC-FE Gold 6 10x9 49 - 1 17SPG 1225/6 533215 HC-FE Gold 6 12x25 65 - 1 46RBF 1225/6 533161 HC-FE Gold 6 12x25 65 2.5 1 47
kg
Cylindrical burr according to DIN 8032 with circumferential and end cut conforming to DIN 8033
Cylindrical shape ZYA Cylindrical shape with radius end WRCBall shape with radius end WRC
Pointed Tree Shape SPGTree Shape with Radius End RBF
Aplication Tree Shapewith Radius End RBF
HSS ROTARY CUTTERHSS Rotary Cutters Shank Dia.6mm
Cylindrical burr shape rotary cutter with end cut
Cylindrical shape with end cut A ST
Type
CutsShank Dia.
d₂ (mm)
Burr Dia. x Length d₁ x l₂ (mm)
Overall Length
l₁ (mm)
ALU 1 2 3 5
EAN 4007220
HSS A 0413ST/6 - - - 058596 - 6 4x13 60 5 62
HSS A 0616ST/6 - 058602 058619 058626 058663 6 6x16 60 5 70
HSS A 0820ST/6 - - - 058640 - 6 8x20 60 5 82
HSS A 1013ST/6 - 058657 058664 058671 - 6 10x13 53 5 85
HSS A 1020ST/6 - - - 058695 - 6 10x20 60 5 86
HSS A 1225ST/6 - 058701 058718 058725 058732 6 12x25 65 5 170
HSS A 1625ST/6 801345 - 058756- 058763 - 6 16x25 65 5 240
kg
1
ABRASIVE PRODUCT14
1
CUTT
ER
Conical Pointed Shape G
Type
Cuts Shank Dia.
d₂ (mm)
Burr Dia. x Length
d₁ x l₂ (mm)
Overall Length
l₁ (mm)
Angle α
1 2 3 5
EAN 4007220
HSS G 0618/6 059197 - 059210 059227 6 6x18 60 14° 5 63
HSS G 1020/6 058602 058619 059258 - 6 6x16 60 28° 5 80
HSS G 1225/6 059272 053289 059296 - 6 12x25 65 27° 5 100
HSS A 0820ST/6 - - 058640 - 6 8x20 60 5αα 82
kg
Conical shape with radius end L
HSS ROTARY CUTTERHSS Rotary Cutters Shank Dia.6mm
Flame shape rotary cutter
Type
Cuts 3 Shank Dia.
d₂ (mm)
Burr Dia x Length d₁ x l₂ (mm)
Overall Length
l₁ (mm)
Radius r
(mm)EAN 4007220
HSS B 0820/6 058787 6 8x20 60 1,5 5 80
HSS B 1230/6 058794 6 12x30 60 2,0 5 110
HSS B 1635/6 058800 6 16x35 75 2,6 5 180
kg
Ball Shape F
Type
Cuts Shank Dia.
d₂ (mm)
Burr Dia. x Length
d₁ x l₂ (mm)
Overall Length
l₁ (mm)
Angle α
Radius r
(mm)1 2 3
EAN 4007220
HSS L 1020/6 - 059562 059579 6 10x20 60 14° 2,9 5 72
HSS L 1225/6 - - 059593 6 12x25 65 14° 3,3 5 130
HSS L 1230/6 - - 059609 6 12x30 70 14° 2,6 5 130
HSS L 1630/6 059616 - 059630 6 12x30 70 14° 4,8 5 180
HSS A 0820ST/6 - - 058640 6 8x20 60 5αα 82
kg
Oval Shape O
Type
CutsShank Dia. d₂ (mm)
Burr Dia. x Length d₁ x l₂ (mm)
Overall Length
l₁ (mm)
Radius r
(mm)
ALU 1 2 3
EAN 4007220
HSS O 0610/6 - - - 059678 6 6x10 55 2,8 5 65
HSS O 1016/6 - - - 059692 6 10x16 56 4 5 105
HSS O 1220/6 - 059708 - 059722 6 12x20 60 5 5 110
HSS O 1625/6 059746 - 059753 059760 6 16x25 65 6,5 5 190
kg
Oval shape rotary cutter
Order No.
Cuts 3 Shank Dia.d₂ (mm)
Burr Dia. x Length d₁ x l₂ (mm)
Overall Length
l₁ (mm)
Angle α
EAN 4007220
HSS W 1213ST/6 059784 6 12x13 53 20° 5 85
kg
Inverted cone shape W with end cut
Inverted cone rotary cutter, tappering off towards the shank, with end cur
www.kawanlama.com 15ABRASIVE PRODUCT
MO
UN
TED
PO
INT
PFERD offers a very extensive line of vitrified and resinoid-bonded mounted points.
Designed to meet individual application needs, these products come in a broad range of grain types, grit sizes, hardness levels and shapes. The mounted points are manufactured on advanced production lines to high standards of dimensional accuracy and stability, consistent quality, and close tolerances.
To select the correct group mounted point, the material, main fields of application and specific operating requirements have to be taken into consideration. This overview shows which different types (abrasive, bonds and hardness grades) are recommended for
the various materials and the tasks at hand.
MOUNTED POINT
MaterialsNormally it is necessary to determine the material to be machined. The various material groups are colour-coded and shown on the left-hand side of the chart below.
ApplicationsThe application must then be selected according to the type of work on the material. We make the following differentiation :• General use• Surface grinding and• Edge grinding applications
It is necessary to differentiate the selection criterial into material, application and required surface finish to find the optimum mounted point bond and the grain mix have an imoact on the grinding output, tool life and aggressiveness of the tools.
• For general use, the emphasis is on the balance between grinding output and tool life• In surface grinding, the mounted ponts are subject to fewer loads. This is why the mounted point bond is comparatively soft and designed to give high stock removal• If edge grinding, the mounted points must be dimensionally stable is comparably hard and designed for a long tool life
Mounted point hardnessAfter determining the application, the hardness can be selected in the horizontal row. The “highly suitable” bond is shown with a black dot ( ).The hardness grade within the bonds ara arranged from :soft” to “hard”.
Material Groups
Bond Resinoid Bond Vitrified Bond
Hardness Grade Hard-ness L
Hard-ness N
Hard-ness D
Hardness F-Alu
Hard-ness H
Hard-ness I
Hard-ness J
Hard-ness K
Hardness M
Hardness O
Hard-ness R
Hard-ness T
Abrasive Grit Type
ADW AN AH CN AWN AW AWCO ARN ADW AR CU AW
Recommended Cut-ting Speed 35-50m/s 35-50m/s 5-20m/s 20-40m/s 30-50m/s 30-50m/s 30-50m/s 30-50m/s 30-50m/s 25-40m/s 30-50m/s 15-20m/sApplication
Steel, Cast Steel
Non-hardened, non-heat-treated steels up to 1200N/mm²(<38HRC)
Construction steels, carbon steels, tool-steels, non-alloyed steels, case-hard-ened steels
General use on edge and surfaceSurface grinding with high stock removalEdge grinding with high form stability
Hardened, heat-treated steels exceeding 1200N/mm²(<38HRC)
Tol steels, tempering steels, alloyed steels
General use on edge and surfaceSurface grinding with high stock removalEdge grinding with high form stability
Cast Steels Non-alloyed cast steels,low-alloyed cast steels
Surface grinding with high stock removalEdge grinding with high form stability
Stainless Steel
Rust and acid-resistant steels
Austentic and ferritic stain-less steels
Surface grinding with high stock removalEdge grinding with high form stability
Non-Ferrous Metals
Soft non-ferrous metals Alu-alloys, brass, copper, zinc
General use on edge and surface
Hard non-ferrous metalsBronze, titanium, titanium alloys, hard aluminium alloys
High-temperature resistant materials
Nicket bassed alloys, cobalt based alloys (aircraft en-gine and turbine construc-tion)
Cast Iron Grey cast iron,White Cast Iron
Cast Iron with flake graph-ite ENGJL, with nodular graphite cast iron ENGJMW, black cast iron EN-GJMB
Surface grinding with high stock removal
Edge grinding and grinding of burning-in with high stock removal
Plastics and other materials
FRP, Thermoplastics, Rub-ber, Wood
General Use on edge and surface
*
*
*
*
*
*
Highly suitable Suitable * Extra models for foundries
1
ABRASIVE PRODUCT16
1
MO
UN
TED
PO
INT
MOUNTED POINT, EN (DIN) SERIES STOCK RANGE
Cylindrical Points ZY
Features :• Mounted Points are ideal for general use on steel surfaces,
providing high abrasive and stock removal rates• Naturally, a high stock removal rate reduces grinding time
and labour costs• Cost reductions are achieved despite increased tool
consumption, since the reduction in labour costs more than compensates tool costs
Benefits :• PFERD mounted point are noted for their consistently superior stock removal, long
service life, and high quality surface finishing performance• High dimensional accuracy and stability, close manufacturing tolerances• Availability of adapted bond types, grit sizes and hardness grades for any application• The high concentricity of PFERD mounted points: - Protects the operator’s safety and health - Reduces the load on the power tool - Minimizes operating vibrations - Prevents chatter marks - Reduces wear
Order No. TypeShank
Dia. (mm)
Dia. x Height (DxT)(mm)
V = VitrifiedVitrified Bond 5 VAluminium Oxide
MADW
OAR
Coarse Fine Coarse FinePF0000876 ZY 0306 3 3 x 6 - 100 - 100 10
PF0000878 ZY 0408 3 4 x 8 60 100 60 100 10
PF0000879 ZY 0408 6 4 x 8 60 - 60 100 10
PF0000880 ZY 0510 3 5 x 10 60 100 60 100 10
PF0000881 ZY 0510 6 5 x 10 60 - 60 100 10
PF0000882 ZY 0613 3 6 x 13 60 100 60 100 10
PF0000883 ZY 0613 6 6 x 13 60 100 60 100 10
PF0000886 ZY 0810 3 8 x 10 46 80 46 80 10
PF0000887 ZY 0810 6 8 x 10 - 80 46 80 10
PF0000888 ZY 0816 3 8 x 16 46 - 46 80 10
PF0000889 ZY 0816 6 8 x 16 46 80 46 80 10
PF0001738 ZY 1013 3 10 x 13 46 - 46 80 10
PF0000894 ZY 1013 6 10 x 13 46 80 46 80 10
PF0001075 ZY 1020 6 10 x 20 46 80 46 80 10
PF0002088 ZY 1025 6 10 x 25 46 - 46 80 10
PF0000905 ZY 1325 6 13 x 25 46 80 46 80 10
PF0000994 ZY 1632 6 16 x 32 30 60 30 60 10
PF0001868 ZY 2010 6 20 x 10 - - 30 60 10
PF0000912 ZY 2025 6 20 x 25 30 60 30 60 10
PF0001399 ZY 2032 6 20 x 32 30 - 30 60 10
PF0001018 ZY 2532 6 25 x 32 30 60 30 60 10
PF0001906 ZY 3220 6 32 x 20 24 46 24 46 5
PF0000938 ZY 4020 6 40 x 20 24 46 24 46 5
PF0001887 ZY 3232 6 32 x 32 24 46 24 46 5
PF0000939 ZY 5025 8 50 x 25 - 46 24 46 5
D
T
Ball KU
DOrder No. Type
Shank Dia.
(mm)
V = VitrifiedVitrified Bond 5 VAluminium Oxide
MADW
OAR
Coarse Fine Coarse FinePF0000947 KU 03 6 46 80 - - 10PFZ000050 KU 03 3 - - - 100 10PF0000948 KU 05 3 - - 60 100 10PF0000949 KU 05 6 - - 60 100 10PF0000950 KU 08 3 - - 46 80 10PF0000951 KU 08 6 - - 46 80 10PF0000952 KU 13 3 - - 46 80 10PF0000953 KU 13 6 46 80 46 80 10PF0000954 KU 16 6 30 60 30 60 10PF0000955 KU 20 6 30 60 30 60 10PF0000956 KU 25 6 30 60 30 60 10PF0000957 KU 32 6 24 46 24 46 5
Please complete the order no. by adding the grit size.
Please complete the order no. by adding the grit size.
www.kawanlama.com 17ABRASIVE PRODUCT
Cylindrical Radius End WR
D
MO
UN
TED
PO
INT
MOUNTED POINT, EN (DIN) SERIES STOCK RANGE
Order No. TypeShank
Dia. (mm)
V = VitrifiedVitrified Bond 5 VAluminium Oxide
MADW
OAR
Coarse Fine Coarse FinePFZ000050 WR 0306 3 - - - 100 10
PFZ000051 WR 0510 3 - - 60 100 10
PFZ000052 WR 0306 6 - - - 100 10
PFZ000053 WR 0510 6 - - 60 100 10
PFZ000054 WR 0816 6 - - 46 80 10
PFZ000055 WR 1320 6 46 80 46 80 10
Please complete the order no. by adding the grit size.
Tree SP
D
T
Order No. TypeShank
Dia.(mm)
V = VitrifiedVitrified Bond 5 VAluminium Oxide
MADW
OAR
Coarse Fine Coarse FinePF0000959 SP 0306 3 - - - 100 10
PFZ000056 SP 0306 6 - - - 100 10
PF0000960 SP 0510 3 - - 60 100 10
PFZ000057 SP 0510 6 - - 60 100 10
PF0000961 SP 0816 3 - - 46 80 10
PFZ000058 SP 0816 6 46 - 46 80 10
PF0000962 SP 1320 6 46 80 46 80 10
PF0000963 SP 2032 6 - - 30 60 10
PF0000965 SP 2050 6 30 - 30 - 10
PF0000966 SP 2540 6 30 - 30 - 10Please complete the order no. by adding the grit size.
Cup TO
D
TOrder No. Type
Shank Dia.
(mm)
V = VitrifiedVitrified Bond 5 VAluminium Oxide
MADW
OAR
Coarse Fine Coarse FinePF0000984 TO 2016 6 - 60 30 60 10
PF0000985 TO 2520 6 - - 30 60 10
PF0000986 TO 3225 6 - - 24 46 5
PFZ000055 TO 4032 6 24 - 24 - 5
Please complete the order no. by adding the grit size.
1
ABRASIVE PRODUCT18
1
Mounted Point Set
Order No. Type Hardness Grit Size Dia. Shank Dia. (mm)
PF0000816 2001 O coarse 6 1PF0000817 2002 O fine 3 1
Assortments of Mounted Point
Order No. Type Hardness Grit Size Dia. Shank Dia. (mm)
PF0000983 SSO 5300 M coarse 6 1
Mounted point set 2001These hardness ”O” tools with 6mm shank dia. are noted for their outstanding versatility, dimensional stability and edge-holding properties.
The set contains 10 mounted points of various shape and sizes.
Contents:One each of the following: ZY 1013, ZY 1320, ZY 2006, ZY 2013, ZY 2025, KU 16WR 2025, WK 2025, SP 1320, KE 2020
Mounted point set 2002This set comprises small mounted points, hardness “O”, with 3mm shank dia., universally suitable for many fine-grinding tasks. It includes the most common shapes and sizes.
Contains 15 mounted points in various shapes and dimensions.
Contents:Two each of the following:ZY 0510, ZY 0810, ZY 1604.One each of the following:ZY 0408, ZY 0613, ZY 0802, ZY 1013, ZY 1303, WR 0510, KU 05, SP 0306, SP 0816.
Assortment of mounted points SSO 5300High-performance mounted points, hardness “M” with 6mm shank, in a sales promoting display carton for (self-service) retail use. The choice of types reflects the most common applications.
Contents:100 mounted points with 6mm shanks dia.hardness “M”, coarse grit.10pcs. per typeZY 1620, ZY 2025, ZY 2506, ZY 2532, ZY 3216, ZY 3232, ZY 4020, SP 2032, KE 2032, KE 2570.
Tapered KE
D
T
MO
UN
TED
PO
INT
MOUNTED POINT, EN (DIN) SERIES STOCK RANGE
Order No. TypeShank
Dia. (mm)
V = VitrifiedVitrified Bond 5 VAluminium Oxide
MADW
OAR
Coarse Fine Coarse FinePF0000967 KE 1010 3 - - 46 - 10
PF0000968 KE 1010 6 - - 46 80 10
PF0000969 KE 1025 6 46 80 46 80 10
PF0000971 KE 1313 6 - - 46 - 10
PF0000972 KE 1616 6 - - 30 60 10
PF0000973 KE 1645 6 46 80 46 80 10
PF0000974 KE 2020 6 - - 30 60 10
PF0000976 KE 2032 6 30 60 30 60 10
PF0001158 KE 2040 6 30 60 30 60 10
PF0000977 KE 2525 6 30 - 30 60 10
PF0000978 KE 2545 6 30 60 30 60 10
PF0000979 KE 2570 6 30 - 30 - 10
PF0000981 KE 3232 6 24 46 24 46 5
PFZ000060 KE 3050 8 24 - 24 - 5
Please complete the order no. by adding the grit size.
www.kawanlama.com 19ABRASIVE PRODUCT
FIN
E G
RIN
DIN
G
ABRASIVE SPIRAL BAND, DRUM HOLDER
Rubber Drum Holder Cylindrical Type
Order No. Type Head Dia. x HeadHeight (DxT) mm
Shank Dia.mm Max. rpm Min. rpm
PF0001199 GK 0610/3 6 x 10 3 55000 30000 5PF0001200 GK0810/6 8 x 10 6 55000 30000 5PFZ000061 GK1010/6 10 x 10 6 44000 30000 5PF0000660 GK1020/6 10 x 20 6 44000 30000 5PFZ000062 GK1310/6 13 x 10 6 44000 30000 5PFZ000063 GK1325/6 13 x 25 6 44000 30000 5PF0000661 GK1530/6 15 x 30 6 36000 26000 5PF0001387 GK2220/6 22 x 20 6 26000 18000 5PF0000663 GK2525/6 25 x 25 6 22900 16000 5PF0000053 GK3020/6 30 x 20 6 19100 13000 5PF0000665 GK3030/6 30 x 30 6 19100 13000 5PFZ000064 GK3825/6 38 x 25 6 15000 10000 5PFZ000065 GK4530/6 45 x 30 6 12700 8500 5PF0000669 GK5125/6 51 x 25 6 11200 7500 5PF0000670 GK6030/6 60 x 30 6 9500 6500 5
Features :• PFERD offers an extensive range of abravise spiral bands and drum
holders• Drum Holders are fully reusable• Slot allow the drum to expand during grinding, thereby tensioning the
abrasive sleeve• A special manufacturing method ensures an outstanding to life even in
heavy duty use• Particularly high stock removal and very aggressive abrasive action
Applications :• Weld dressing on structural steelwork• Find grinding in the thank and process
equipment construction• Rework in assembly and repair project• Refinement of edges and contours in jet
engine construction
D
T
Abrasive Spiral Bands
Order no. Type D x T (mm) Description
PF0001202 KSB 0610 6 x 10 Abrasive Spiral Bands grit 150 25
PF0001203 KSB 0810 8 x 10 Abrasive Spiral Bands grit 150 25
PF0001174 KSB 1020 10 x 20 Abrasive Spiral Bands grit 80 25
PF0001747 KSB 1020 10 x 20 Abrasive Spiral Bands grit 150 25
PF0001204 KSB 1530 15 x 30 Abrasive Spiral Bands grit 80 25
PF0001119 KSB 1530 15 x 30 Abrasive Spiral Bands grit 150 25
PF0001677 KSB 2220 22 x 20 Abrasive Spiral Bands grit 50 25
PF0001388 KSB 2220 22 x 20 Abrasive Spiral Bands grit 80 25
PF0001143 KSB 2220 22 x 20 Abrasive Spiral Bands grit 150 25
PF0000492 KSB 2220 22 x 20 Abrasive Spiral Bands grit 240 25
PFZ000069 KSB 2525 25 x 25 Abrasive Spiral Bands grit 80 25
PFZ000070 KSB 3020 30 x 20 Abrasive Spiral Bands grit 80 25
PF0001176 KSB 3030 30 x 30 Abrasive Spiral Bands grit 60 25
PF0000494 KSB 3030 30 x 30 Abrasive Spiral Bands grit 80 25
PF0001217 KSB 3030 30 x 30 Abrasive Spiral Bands grit 150 25
PFZ000071 KSB 3825 38 x 25 Abrasive Spiral Bands grit 80 25
PFZ000072 KSB 4530 45 x 30 Abrasive Spiral Bands grit 80 10
PF0000495 KSB 5125 51 x 25 Abrasive Spiral Bands grit 80 10
PFZ000073 KSB 6030 60 x 30 Abrasive Spiral Bands grit 80 10
PFZ000074 KSB 201463 20/14 x 63 Abrasive Spiral Bands grit 80 25
PFZ000075 KSB 292230 29/22 x 30 Abrasive Spiral Bands grit 80 25
PFZ000076 KSB 362260 36/22 x 60 Abrasive Spiral Bands grit 80 25
Rubber Drum Holder Conical Type
Order No. Type Head Dia. x HeadHeight (DxT) mm
Shank Dia.mm Max.rpm Min. rpm
PFZ000066 GK 201463 20/14 x 63 6 26000 19000 5PFZ000667 GK 292230 29/22 x 30 6 19100 13000 5PFZ000068 GK 362260 36/22 x 60 6 15900 10000 5
D1
T
D2
Abrasive spiral bands with aluminium oxide grain are universally suitable for many materials.with : Small Pack KSB = for occasional requirements Bulk Pack GSB = Cost efficient packaging unit for volume users
D
T
GSB (1000pcs)
KSB (25pcs)
1
ABRASIVE PRODUCT20
1
COM
BID
ISC
COMBIDISC GRINDING TOOL
COMBIDISC Holders SBH
Features :• Easy to use• Rapid tool change• No adhesion problems• Firmly secured disc• Disc does not become detached under influence of heat• Vibration-free operation due to perfectly centralized tool• Tools come in 20-75mm dia. in various grit types and sizes
Applications :• Tool and mouldmaking• Patternmaking• Mechanical engineering• Automotive applications• Aerospace industry• Jet engine construction and maintenance• Construction of tanks, pressure vessels and process equipment (e.g., for
the foodstuff processing and chemical industry)
TypeOrder No. Dia. D
(mm)Shank
Dia.(mm)Max.
Speed (rpm)Hard (H) Medium (M) Soft (W)SBH 20 PFZ000077 PF0001587 PFZ000081 20 6 47500 1SBH 25 PFZ000078 PF0002053 PFZ000082 25 6 38000 1SBH 38 PFZ000079 PF0002052 PF0001732 38 6 25000 1SBH 50 PFZ000080 PF0001528 PF0001733 50 6 19000 1SBH 75 PF0001137 PF0001529 PF0001136 75 6 12500 1
COMBIDISC Abrasive discs CDAluminium oxide A
TypeGrit Size Dia. D
(mm)Recom.
Speed (rpm)36 60 80 120CD 20 A PFZ000083 PFZ000087 PFZ000091 PFZ000095 20 20000-35000 100CD 25 A PFZ000084 PFZ000088 PFZ000092 PFZ000096 25 15000-26000 100
CD 38 A PFZ000085 PFZ000089 PFZ000093 PFZ000097 38 10000-16000 100CD 50 A PFZ000086 PF0001678 PF0002000 PF0001679 50 8000-13000 100CD 75 A PF0002085 PFZ000090 PFZ000094 PFZ000098 75 5000-9000 50
COMBIDISC abrasive disc with aluminium oxide A grain are suitable for use on metals and other materials.
COMBIDISC Abrasive discs CDAluminium oxide A-Forte
TypeGrit Size Dia. D
(mm)Recom.
Speed (rpm)36 Forte 60 Forte 80 Forte 120 ForteCD 25 A PFZ000099 PFZ000102 PFZ000104 PFZ000106 25 15000-26000 100CD 38 A PFZ000100 PFZ000103 PF0001781 PF0001783 38 10000-16000 100CD 50 A PF0001846 PF0001847 PF0001782 PF0001626 50 8000-13000 100CD 75 A PFZ000101 PF0001524 PFZ000105 PF0001627 75 5000-9000 50
Aluminium oxide A-Forte types are universally suitable on all metals.
High stock removal, cool grinding performance and a long tool life are the hallmarks of this product.
cd system COMBIDISC holders are available in three types, colour-coded as follows:• soft (W) = grey• medium-hard (M) = blue• hard (H) = red
The following adapters are available:AF 14-1/4 (M14 female thread, 1/4-20 UNC male thread). Suitable for machines with M14 spindle.
SPV-20 (1/4-20 UNC female thread, 1/4-20 UNC male thread). Suitable for machines with 1/4-20 UNC spindle, e.g., PW 3/120 DH. Safety note : Max. peripherial speed : 50m/s.
Adapter
AF 14-1/4
SPV-20
COMBIDISC Abrasive discs CDSilicon carbide SIC
TypeGrit Size Dia. D
(mm)Recom.
Speed (rpm)36 60 80 120 240CD 50 A PFZ000107 PFZ000109 PFZ000111 PFZ000113 PFZ000115 50 8000-13000 100CD 75 A PFZ000108 PFZ000110 PFZ000112 PFZ000114 PFZ000116 75 5000-9000 50
Silicon carbide SIC combidisc disc are ideal for use on aluminium, copper, bronze, titanium, high alloy steel and plastic.
www.kawanlama.com 21ABRASIVE PRODUCT
COM
BID
ISC
COMBIDISC GRINDING TOOLCOMBIDISC Non Woven disc CDHard Type
TypeGrit Size Dia. D
(mm)Recom.
Speed (rpm)Coarse Medium Very FineCD VRH 20 A PFZ000117 PFZ000122 PFZ000127 20 14000 - 19000 50CD VRH 25 A PFZ000118 PFZ000123 PFZ000128 25 11000 - 15000 50CD VRH 38 A PFZ000119 PFZ000124 PFZ000129 38 7000 - 10000 50CD VRH 50 A PFZ000120 PFZ000125 PFZ000130 50 6000 - 8000 50CD VRH 75 A PFZ000121 PFZ000126 PFZ000131 75 4000 - 5000 25
Unversally suitable for surface conditioning of metal eg. removal of prefinishing marks or light deburing job
Available grit types :G = Coarse (colour : yellowish brown)M = Medium (colour : reddish brown)SF = Very fine (colour : blue)
COMBIDISC Felt disc
Order No. Type Dia. D(mm)
Recom.Speed (rpm)
PFZ000132 CD FR 50 50 2000 - 4000 10PFZ000133 CD FR 50 75 1200 - 2500 10
For face down polishing of medium size surface using polishing paste bars, grinding paste or diamond polishing paste
Diamond Polishing Paste
Order No. Type Grit Size Cap Colour
Content(gr)
PF0001628 DPP 30-5 30 brown 5 1PFZ000134 DPP 30-20 30 brown 20 1PFZ000135 DPP 15-5 15 Blue 5 1PFZ000136 DPP 15-20 15 Blue 20 1PF0001629 DPP 7-5 7 Red 5 1PFZ000137 DPP 7-20 7 Red 20 1PF0001630 DPP 3-5 3 Green 5 1PFZ000138 DPP 3-20 3 Green 20 1
These pastes are designed for work on very hard materials, e.g. tungsten, carbide and heat-treated steels.
Available grit sizes :30 = coarse15 = medium7 = fine3 = very fine
Polishing Paste Bar
Order No. Type Description Colour Use for Dimensions (mm)
PF0002127 PP 1 VP Fe Pre-polish Green Steel - Stainless steel 70x50x140 1
PFZ000139 PP 2 VP Ms Pre-polish Grey Alum + Brass 70x50x140 1
PFZ000140 PP 3 VP NE Pre-polish Brown Non ferrous metal 70x50x140 1
PFZ000141 PP 4 HGP High gloss polish Pink All Metal 70x50x140 1
PFZ000142 PP 5 HGP K High gloss polish Beige Plastic 70x50x140 1
The PFERD range comprises five different fasters colour coded by application purpose
Grinding Compound
Order No. Type Grit Size Content(gr)
PF0001148 SFP 90 90 250 1
PF0000194 SFP 150 150 250 1
PF0000195 SFP 280 280 250 1
PF0000196 SFP 360 360 250 1
PF0001149 SFP 600 600 250 1
PF0000197 SFP 800 800 250 1
Oil-solube grinding compound with sharp edged SIC grain are ideal for fine polishing operations, e.g. regrinding of valves of shaft bearings, and in preparation of polishing steps with felt tools and cloth rings.
1
ABRASIVE PRODUCT22
1
POLICAP
POLICAP TOOL SET
Contents - PCS 650 :320pcs. POLICAP abrasive caps, shape A320pcs. POLICAP abrasive caps, shape Gin five dimensions and three grit sizes.Matching the above: 10pcs. POLICAP abrasive cap holders
Features :• The PFERD range comprises an extensive selection of POLICAP abrasive caps and cones.• Cap and cone holders are fully reuseable• Slots in the holder facilitate its expansion, locking the tool firmly in place.• The special manufacturing process guarantees good shapeholding and excellent fine
grinding properties• Easy tool replacement
Applications :• Find grinding in tool, die and mouldmaking applications• Grinding in hard-to-reach areas and bores
Contents - PCS 110C:105pcs. POLICAP abrasive caps, shape Cin five dimensions and three grit sizes.Matching the above: 5pcs. POLICAP abrasive cap holders
Contents - PCS 110G:105pcs. POLICAP abrasive caps, shape Gin five dimensions and three grit sizes.Matching the above: 5pcs. POLICAP abrasive cap holders
Contents - PCS 110A:105pcs. POLICAP abrasive caps, shape Ain five dimensions and three grit sizes.Matching the above: 5pcs. POLICAP abrasive cap holders
Order No. Type Dimension (mm)
PF0001080 PCS 650 332 x 235 x 50 1PF0001923 PCS 110A 180 x 145 x 40 1PF0001924 PCS 100C 180 x 145 x 40 1PF0001925 PCS 100G 180 x 145 x 40 1
POLI
ROLL
AN
D P
OLI
CAP
POLIROLL
Features :• Poliroll tools are ideals for grinding in confined areas• Fresh grain is exposed in successive layers as the other coated abrasive
wears off• Very good stock removable performance• Special arbor for easy tools replacement
Applications :• Deburring on bores and in hard to reach
places• Fillet weld dressing on metal structure• Removal off flash on casting
POLIROLL Cartridge Roll
Order No. Type Grit SizeDia. x
Height mm (DxT)
Recom. rpm
Suitable Matching Arbors
PF0001513 PR 0625 80 6 x 25 20000 BO 6-18-3 20PF0001721 PR 0625 150 6 x 25 20000 BO 6-18-3 20PF0001709 PR 0635 150 6 x 35 20000 BO 6-24-3 20PF0001294 PR 0925 80 9 x 25 15000 BO 6-18-3 20PF0001293 PR 0925 150 9 x 25 15000 BO 6-18-3 20PF0001582 PR 0935 80 9 x 35 15000 BO 6-24-3 20PF0001501 PR 1225 80 12 x 25 12000 BO 6-18-3 20PF0001502 PR 1225 150 12 x 25 12000 BO 6-18-3 20PF0001351 PR 1235 80 12 x 35 12000 BO 6-24-3 20
Arbors for POLIROLL
Order No. Type Shank Dia. (mm) Suitable for
PF0001931 BO 3-18-3 3 PR 0625 1PF0001408 BO 6-18-3 6 PR 0625, PR 0925, PR 1225 1PF0001192 BO 6-24-3 6 PR 0635, PR 0935, PR1235 1
POLIROLL TOOL SET
Order No. Type Dimension (mm)
PF0001616 PRS 151 180 x 145 x 40 1
Contents :• 150 Poliroll Cartridge rolls plus one matching arbor 20pcs each of PR 0625, A 80 and A 150 20pcs each of PR 0925, A 80 and A 150 20pcs each of PR 1225, A 80 and A 150 10pcs each of PRK 1025, A 80 and A 150 10pcs each of PRK 1225, A 80.
www.kawanlama.com 23ABRASIVE PRODUCT
COAT
ED A
BRA
SIV
E TO
OL
FAN GRINDERFeatures :• High flexibility• High stock removal due to aggressive coated abrasive• Flaps wear off uniformly and without residue on the workpiece surface
ensuring adequate availability of sharp grit at all times• Due to the special cast core construction, the face of the tool can be
worked up very close to the edges and corners
Applications :• Fine grinding of radii in tool, die and mouldmaking applications• Grinding small or hard to reach surface in tank and process equipment
constructions• Finishing work on valves and fittings made of non-ferrous metal or light
alloys• Grinding of turbine blades in jet engine assembling and maintenance.
Fan Grinder Aluminium Oxide A
D
T
TypeGrit Size Shank
Dia.(mm)
Recom. / Max.
Speed (rpm)60 80 120 150 180 240 320 400
F 1010/3 A PFZ000383 PFZ000163 PFZ000192 PFZ000220 PFZ000248 PFZ000278 PFZ000309 PFZ000342 3 38000 / 75000 10
F 1015/3 A PFZ000384 PFZ000164 PFZ000193 PFZ000221 PFZ000249 PFZ000279 PFZ000310 PFZ000343 3 38000 / 75000 10
F 1505/3 A PFZ000385 PFZ000165 PFZ000194 PFZ000222 PFZ000250 PFZ000280 PFZ000311 PFZ000344 3 25000 / 50000 10
F 1510/3 A PFZ000386 PFZ000166 PFZ000195 PFZ000223 PFZ000251 PFZ000281 PFZ000312 PFZ000345 3 25000 / 50000 10
F 1515/3 A PFZ000387 PFZ000167 PFZ000196 PFZ000224 PFZ000252 PFZ000282 PFZ000313 PFZ000346 3 25000 / 50000 10
F 2010/3 A PFZ000388 PFZ000168 PFZ000197 PFZ000225 PFZ000253 PFZ000283 PFZ000314 PFZ000347 3 19000 / 38000 10
F 2010/6 A PFZ000389 PFZ000169 PFZ000198 PFZ000226 PFZ000254 PFZ000284 PFZ000315 PFZ000348 6 19000 / 38000 10
F 2510/6 A PFZ000390 PFZ000170 PFZ000199 -PFZ000227 PFZ000255 PFZ000285 PFZ000316 PFZ000349 6 15000 / 30000 10
F2515/6 A PFZ000391 PFZ000171 PFZ000200 PFZ000228 PFZ000250 PFZ000286 PFZ000317 PFZ000350 6 15000 / 30000 10
F2520/6 A PFZ000392 PFZ000172 PFZ000201 PFZ000229 PFZ000256 PFZ000287 PFZ000318 PFZ000359 6 15000 / 30000 10
F 2525/6 A PFZ000141 PFZ000173 PF0001436 PFZ000230 PFZ000257 PFZ000288 PFZ000319 PFZ000360 6 15000 / 30500 10
F3005/3 A PFZ000142 PFZ000174 PFZ000202 PFZ000231 PFZ000258 PFZ000289 PFZ000320 PFZ000361 3 12000 / 25400 10
F3005/6 A PFZ000143 PFZ000175 PFZ000203 PFZ000232 PFZ000259 PFZ000290 PFZ000321 PFZ000362 6 12000 / 25400 10
F 3010/3 A PFZ000144 PFZ000176 PFZ000204 PFZ000233 PFZ000260 PFZ000291 PFZ000322 PFZ000363 3 12000 / 25400 10
F 3010/6 A PF0000537 PF0000538 PF0000532 PF0000540 PFZ000261 PF0001313 PFZ000323 PF0002024 6 12000 / 25400 10
F 3015/6 A PFZ000145 PF0000536 PF0001670 PF0001363 PF0001593 PF0001802 PFZ000324 PFZ000364 6 12000 / 25400 10
F 3030/6 A PFZ000146 PFZ000177 PFZ000205 PFZ000234 PFZ000262 PFZ000292 PFZ000325 PFZ000365 6 12000 / 25400 10
F 4010/6 A PFZ000147 PFZ000178 PFZ000206 PFZ000235 PFZ000263 PFZ000293 PFZ000326 PFZ000366 6 9600 / 19100 10
F 4015/6 A PFZ000148 PFZ000179 PFZ000207 PFZ000236 PFZ000264 PFZ000294 PFZ000329 PFZ000367 6 9600 / 19100 10
F 4020/6 A PFZ000149 PF0000556 PF0000557 PF0000558 PF0000559 PF0000560 PFZ000330 PFZ000368 6 9600 / 19100 10
F 5010/6 A PFZ000150 PFZ000180 PFZ000208 PFZ000237 PFZ000265 PFZ000295 PFZ000330 PFZ000369 6 7000 / 15200 10
F 5015/6 A PFZ000151 PF0000568 PF0000569 PF0000570 PFZ000266 PF0000571 PF0000572 PFZ000370 6 7000 / 15200 10
F 5020/6 A PFZ000152 PFZ000181 PFZ000209 PFZ000238 PFZ000267 PFZ000296 PFZ000331 PFZ000371 6 7000 / 15200 10
F 5030/6 A PFZ000153 PFZ000182 PFZ000210 PFZ000239 PFZ000268 PFZ000297 PFZ000332 PFZ000372 6 7000 / 15200 10
F 6015/6 A PFZ000154 PFZ000183 PFZ000211 PFZ000240 PFZ000269 PFZ000298 PFZ000333 PFZ000373 6 6300 / 12700 10
F 6020/6 A PFZ000155 PFZ000184 PFZ000212 PFZ000241 PFZ000270 PFZ000299 PFZ000334 PFZ000374 6 6300 / 12700 10
F 6030/6 A PFZ000156 PFZ000185 PFZ000213 PFZ000242 PFZ000271 PFZ000300 PFZ000335 PFZ000375 6 6300 / 12700 10
F 6040/6 A PF0000593 PF0000594 PF0000595 PF0000596 PFZ000272 PF0000597 PF0000598 PFZ000376 6 6300 / 12700 10
F 6050/6 A PFZ000157 PFZ000186 PFZ000214 PFZ000243 PFZ000273 PFZ000301 PFZ000336 PFZ000377 6 6300 / 12700 10
F 8015/6 A PFZ000158 PFZ000187 PFZ000215 PFZ000244 PFZ000274 PFZ000302 PFZ000337 PFZ000378 6 4800 / 9500 10
F 8020/6 A PFZ000159 PFZ000188 PFZ000216 PFZ000245 PFZ000275 PFZ000303 PFZ000338 PFZ000379 6 4800 / 9500 10
F 8030/6 A PFZ000160 PFZ000189 PFZ000217 PFZ000246 PFZ000276 PFZ000304 PFZ000339 PFZ000380 4800 / 9500 10
F 8040/6 A PFZ000161 PFZ000190 PFZ000218 PFZ000247 PFZ000277 PFZ000305 PFZ000340 PFZ000381 6 4800 / 9500 10
F 8050/6 A PFZ000162 PFZ000191 PFZ000219 PFZ000306 PFZ000307 PFZ000308 PFZ000341 PFZ000382 6 4800 / 9500 10
1
ABRASIVE PRODUCT24
1
POLINOX Mounted Point PNL
TypeAvailable Grit Size A=Aluminium
OxideShank
Dia.(mm)
Recom. /Max. Speed
(rpm)100 180 280PNL 4020/6 A PF0001777 PF0001414 PF0002030 6 7500 / 15000 10PNL 5030/6 A PFZ000393 PFZ000396 PFZ000399 6 6000 / 12000 10PNL 6050/6 A PFZ000394 PFZ000397 PFZ000400 6 5000 / 10000 10PNL 8050/6 A PFZ000395 PFZ000398 PFZ000401 6 4000 / 7500 10
D
T
Features :• No heat build-up during grinding• Extensive and diverse range of
dimensions, grit sizes and tool types
Applications :• Matt and satin-finishing of metal• Non-ferrous metal depolishing• Cleaning of oxidized non ferrous metal• Continuous matt finishing of stainless steel (without visible
transitions)• Surface roughening of plastic in preparation of adhesive bonding
POLINOX Mounted Point PNZ
TypeAvailable Grit Size
A=Aluminium OxideShank
Dia.(mm)
Recom. /Max. Speed
(rpm)100 180PNZ 4020/6 A PF0001779 PF0001178 6 7500 / 15000 10PNZ 6050/6 A PF0001780 PF0002092 6 5000 / 10000 10PNZ 8050/6 A PF0001835 PFZ000403 6 4000 / 7500 10
PNZ 10050/6 A PFZ000402 PFZ000404 6 3000 / 6000 5
D
T
POLICLEAN Mounted Tool
Order No. Type Shank Dia. (mm)
Recom. Speed (rpm)
PF0002036 PCLYZ 5013/6 6 6000 - 12000 5PFZ000405 PCLYZ 5026/6 6 6000 - 12000 5PFZ000406 PCLYZ 7526/6 6 4000 - 5100 5
POLICLEAN Mounted Tool
Order No. Type Width(mm)
Center HoleDia. (mm)
Recom.Speed (rpm)
PF0001827 PCLD 115-13 13 22.2 5000 - 7000 5PF0002037 PCLD 125-13 13 22.2 5000 - 7000 5
COAT
ED A
BRA
SIV
E TO
OL
POLINOX
The non woven abrasive is arranged in a plurally of radial elements with abrasive cloth interlayers. This structure permits an improved stock removal and produces a coarser finish.
For general purpose periperal grinding.
The non woven cleaning fabric is supported by abacking pad. This design allows POLICLEAN® Disc to be used very effective in face grinding.
Recommended periperal speed 30 - 35m/s
POLIVLIES® DiscFor flexible periperal grinding of difficult workpiece contours.Application Examples:• Deburing of ribs and deep fins• Cleaning of cylinder Heads• Fine grinding on radiator type heat exchangers.
TypeGrit Size Dia. x Width
(mm)Center Hole
(mm)Recom / Max.
Speed (rpm)Suitable
ArborMedium Very FinePVR 15008-13 A PFZ000407 PFZ000408 150 x 8 13 1300 / 4000 PVR 6/13 1-25 10
Arbor for POLIVLIES® Disc
Type Order No. Shank Dia. (mm)
ShankLength (mm)
Suitable for Center Hole (mm)
Clamping Width (mm)
PVR 6/13 1-25 PFZ000409 6 35 13 1-25 10
Ordering Note :Please order arbor separately
www.kawanlama.com 25ABRASIVE PRODUCT
UNIVERSAL LINE PSF, PERFORMANCE SG
Steel/Cast Iron/Stainless Steel (INOX)
REIN
FORC
E G
RIN
DIN
G W
HEE
L
Features :The PFERD range of reinforce grinding wheels meets state-of-the-art requirements, providing outstanding stock removal, handling convenience, and high cost-efficiency
Benefits :• Universal Line PSF for general-purpose use in industry, crafts and DIY use• Performance Line SG Broadest range for professional use in industry and
crafts• Special/High-Performance Line SGP Designed for special industrial
applications
Order No. Type Dimension [mm (Inch)] Max. Speed (rpm)
PF0001030 E100-6A24 L PS-F 100 x 6.3 x 16.0 (5/8”) 15300 10
PF0002101 E178-7A24 L PS-F 178 x 7.2 x 22.23 (7/8”) 8600 10
PF0002109 E230-7A24 L PS-F 230 x 7.2 x 22.23 (7/8”) 6600 10
Steel
Order No. Type Dimension[mm (Inch)] Max. Speed (rpm)
PF0001577 E178-7A30 K PS-F 178 x 6.3 x 22.23 (7/8”) 8600 10
Medium grade (L) for use on high-grade steel and other metals, fast stock removal and long service life.For general purpose use.Manufactured without addition of ferrous, sulphurous chlorinated fillers.
Very soft type (K) for use on steel and other metals. Very fast stock removal and long service life.Particularly aggressive abrasive action.
Steel/Cast Iron
Order No. Type Dimension[mm (Inch)] Max. Speed (rpm)
PF0001504 E178-7A30 P PS-F 178 x 6.3 x 22.23 (7/8”) 8600 10
General purpose tool of hardness grade P use on steel/Cast iron. Very fast stock removal and long service lifeParticularly aggressive abrasive action.
Stainless Steel
Order No. Type Dimension[mm (Inch)] Max. Speed (rpm)
PF0001970 E100-6A30 M PSF INOX 100 x 6.3 x 16.0 (5/8”) 15300 10PF0001632 E178-7A30 M PSF INOX 178 x 7.2 x 22.23 (7/8”) 8600 10PF0001748 E230-7A30 M PSF INOX 230 x 7.2 x 22.23 (7/8”) 6600 10
Medium grade (M) for use on high-grade steel and difficult to grid materials, fast stock removal and long service life.Manufactured without addition of ferrous, sulphurous chlorinated fillers.
Steel
Order No. Type Dimension[mm (Inch)] Max. Speed (rpm)
PF0001993 E178-7A24 RSG 178 x 7.2 x 22.23 (7/8”) 8600 10
Professional tool of hardness grade R for use in high pressure applications. By aggressive abrasive performance and very long tool life. Provide out standing shape stability in pipeline applications (weld finishing , edge grinding, root pass grinding).
UNIVERSAL LINE PSF
PERFORMANCE SG
1
ABRASIVE PRODUCT26
1
GRI
ND
ING
WH
EEL
REINFORCED GRINDING WHEELCasting Scale Hard-Type Hardness Grade S
Proffesional tool of hardness grade S.PFERD product characterized by aggressivegrinding performance and very long tool life
Abrasive : Aluminium oxide/silicon carbide AC
Workpiece materials :Casting scale, flake graphite cast iron, nodularcast iron, hard aluminium
Application :Surface grinding, work on weld seams, chamfering, deburring
Recommendation for use :Designed preferably for use on high-power angnle grinders. Provides optimum grinding results on pneumatic turbine grinders and powerful high frequency or electric angle grinders
Order No. EAN 4007220 EN-Designation DxUxH (mm(Inch)) Max. Speed (rpm)
E 178-7 AC 30 S SG/22,23 520208 27 AC 30 S BF 80 178x7,2x22x23 (7/8) 8,600 10 4,400
E 230-7 AC 30 S SG/22,23 520215 27 AC 30 S BF 80 230x7,2x22x23 (7/8) 6,600 10 6,900
kg
Casting Scale Hard-Type Hardness Grade S
Proffesional tool of hardness grade Q.PFERD product characterized by aggressivegrinding performance and very long tool life
Abrasive : Silicon carbide AC
Workpiece material :Cast iron/casting scale, stone, hard aluminium
Application :Surface grinding chamfering, deburring
Recommendation for use :Designed preferably for use on high-power angnle grinders. Provides optimum grinding results on pneumatic turbine grinders and powerful high frequency or electric angle grinders
Order No. EAN 4007220 EN-Designation DxUxH (mm(Inch)) Max. Speed (rpm)
E 115-7 C 24 Q SG/22,23 471135 27 C 24 Q BF 80 115x7,2x22,23 (7/8) 13.300 10 1,840`
E 125-7 C 24 Q SG/22,23 643303 27 C 24 Q BF 80 125x7,2x22,23 (7/8) 12.200 10 2,250
E 178-7 C 24 Q SG/22,23 471173 27 C 24 Q BF 80 178x7,2x22,23 (7/8) 8.600 10 4,300
E 230-7 C 24 Q SG/22,23 329290 27 C 24 Q BF 80 230x7,2x22,23 (7/8) 6.600 10 7,100
kg
More Productivityin industry and handycrafts
www.kawanlama.com 27ABRASIVE PRODUCT
REIN
FORC
E G
RIN
DIN
G W
HEE
L A
ND
CU
T- O
FF W
HEE
L
SPECIAL/HIGH PERFORMANCE SGPSteel
Order No. Type Dimension[mm (Inch)] Max. Speed (rpm)
PF0001992 E178-7A24 RSGP 178 x 7.2 x 22.23 (7/8”) 8600 10
Special-purpose tool of hardness grade R. For professional work meeting the highest standard. By aggressive grinding performance and outstanding to life (weld finishing and edge grinding). Preferably for use on high power pneumatic and electric angle grinder.
Stone (Cup Wheels)
Bore
General purpose tool of hardness grade Q for wet and dry grinding
Order No. Type Bore Dia.(mm)
Max. Dia. (mm)
Min. Dia.(mm)
Cup Height(mm)
Wall Thickness
(mm)
Max. speed
rpm
PF0001971 50 ETT 80-8 C 80 Q SG 22.23 80 80 27 8 11900
PF0000801 50 ETT 110-20 C 30 Q SG 22.23 110 90 55 20 8600
Steel
Order No. Type DimensionD1 x B x D2 [mm(Inch)]
Max. Speedrpm
PF0001341 EHT 100-2,4A 46 P PS-FORTE 100 x 2.4 x 16.0 (5/8”) 15200 25PF0000782 EH 100-2,4A 46 P PS-FORTE 100 x 2.4 x 16.0 (5/8”) 15200 25PF0001614 EH 100-3,2A 46 P PS-FORTE 100 x 3.2 x 16.0 (5/8”) 15200 25PF0001478 EHT 178-3,0A 24 P PS-FORTE 178 x 3.0 x 22.2 (7/8”) 8600 25
EHT EH
CUT-OFF WHEELS PS-FORTE
General purpose tool of hardness grade P. PFERD product characterized by aggressive abrasive performance and long tool life .
Abrasive : Aluminium oxide AWorkpiece Materials : SteelApplication : Cutting of steel metal, sections
and solid materials
Recommendation for use :Disc thickness 1,9/1,6/1,0mm for fast, convenient cutting with minimized burr formation. Disc thickness 2,4mm for general cutting applications. This thickness 3,2/3,0mm for maximum tool life with high lateral stability.Suitable for angle grinders of all output levels
1
ABRASIVE PRODUCT28
1
CUT-
OFF
WH
EEL
CUT-OFF WHEEL PERFORMANCE LINE SGPERFORMANCE LINE SGFeatures :Multipurpose tool of hardness grade R-INOX for reduced heat build-up. Suitable for use with angle grinders of all output levels.
Benefits :• Thin cut-off wheels (1.0mm) provide fast and convinient cutting while
minimizing burr formation• Aggressive cutting performance and very long tool life
Abrasive: Aluminium oxideManufactured without addition of ferrous, sulphurous or chlorinated fillers
Workpiece materialStainless steel (INOX)
ApplicationCutting sheet metal, sections and solid material
Stainless Steel (INOX)
EHT
Order No. Type Dimension[mm (Inch)]
Max. Speed (rpm)
Stainless Steel (INOX)PF0001424 EHT 100-1.0 A 60 RSG-INOX 100 x 1.0 x 16.0 (5/8”) 15200 25PF0001851 EHT 125-1.0 A 60 RSG-INOX 125 x 1.0 x 22.23 (7/8”) 12200 25
Aluminium / Non Ferrous MetalPF0001656 EHT 178-2.9 A 24 NSG ALU 178 x 2.9 x 22.23 (7/8”) 8600 25PF0002100 EHT 230-2.9 A 24 NSG ALU 230 x 2.9 x 22.23 (7/8”) 6600 25
CUT-OFF WHEEL LINE SG, ARBORSteel/Stainless steel (INOX)/Cast Iron/Non Ferrous metals
Features :• Start from 30-76mm• Only use for steel / stainless steel and non
ferrous• Type : EHT • Application for cutting of sheet metal,
sections, and solid material.
Benefits :• Multipurpose tool of hardness grade P for cutting with reduced heat
built-up with straight-type grinders• Aggresive abrasive performance
Order No. Type DimensionD1 x B x D2 [mm(Inch)]
Max. Speedrpm
PF0001531 EHT 30-1.1 A 60 P SG 30 x 1.1 x 6.0 (1/4”) 51000 50PFZ000410 EHT 30-1.4 A 60 P SG 30 x 1.4 x 6.0 (1/4”) 51000 50PF0001800 EHT 40-1.1 A 60 P SG 40 x 1.1 x 6.0 (1/4”) 38200 50PFZ000443 EHT 40-2.1 A 60 P SG 40 x 2.1 x 6.0 (1/4”) 38200 50PFZ000442 EHT 50-1.1 A 60 P SG 50 x 1.1 x 6.0 (1/4”) 30600 50PFZ000441 EHT 50-1.4 A 60 P SG 50 x 1.4 x 6.0 (1/4”) 30600 50PF0001824 EHT 50-2.1 A 46 P SG 50 x 2.1 x 6.0 (1/4”) 30600 50PF0001100 EHT 50-3.0 A 46 P SG 50 x 3.0 x 6.0 (1/4”) 30600 50PFZ000440 EHT 65-1.1 A 60 P SG 65 x 1.4 x 6.0 (1/4”) 23500 50PFZ000439 EHT 65-1.1 A 60 P SG 65 x 1.4 x 10.0 (25/64”) 23500 50PFZ000438 EHT 65-1.4 A 60 P SG 65 x 1.4 x 10.0 (25/64”) 23500 50PFZ000437 EHT 65-2.1 A 46 P SG 65 x 2.1 x 10.0 (25/64”) 23500 50PFZ000436 EHT 70-1.1 A 60 P SG 70 x 1.1 x 10.0 (25/64”) 21800 50PFZ000435 EHT 70-1.4 A 60 P SG 70 x 1.4 x 10.0 (25/64”) 21800 50PFZ000434 EHT 70-2.1 A 60 P SG 70 x 2.1 x 10.0 (25/64”) 21800 50PFZ000433 EHT 70-3.0 A 60 P SG 70 x 3.0 x 10.0 (25/64”) 21800 50PFZ000432 EHT 76-1.1 A 60 P SG 76 x 1.1 x 6.0 (1/4”) 20100 50PFZ000411 EHT 76-1.1 A 60 P SG 76 x 1.1 x 10.0 (25/64”) 20100 50PFZ000412 EHT 76-1.4 A 60 P SG 76 x 1.4 x 10.0 (25/64”) 20100 50PFZ000413 EHT 76-2.1 A 46 P SG 76 x 2.1 x 10.0 (25/64”) 20100 50PFZ000414 EHT 76-3.0 A 46 P SG 76 x 3.0 x 10.0 (25/64”) 20100 50
Order No. Type ShankDia. (mm)
Tool Center Dia. (mm)
ClampingWidth (mm)
PF0002034 BO 6/6 0-4 6 6 0 - 4 1PFZ000415 BO 6.35/6 0-4 (¼”) 6.35 6 0 - 4 1PF0000431 BO 6/106 0-4 6 10 0 - 4 1PFZ000416 BO 6.35/10 0-4 (¼”) 6.35 10 0 - 4 1PFZ000417 BO 8/10 0-4 8 10 0 - 4 1
Arbor for small cut-off wheel
Accessories for mounting small cut-off wheels on straight grinders
Aluminium / Non Ferrous Metal
Abrasive: Aluminium oxideContains no fillers which might leave and undesirable surface residue. The workpiece can be welded right away, without any further threatment.
Workpiece materialsTough and hard aluminium, non ferrous metal
ApplicationCutting sheet metal, sections and solid materialEHT
ApplicationCutting of sheet metal, sections, and solid material
Abrasive : Aluminium oxideManufactured without addition of ferrous, sulphurous or chlorinated filters.
Workpiece materialSteel, stainless steel (INOX), high temperature resistant steels, cast iron, non-ferrous metals.
Ordering notePlease specify centre hole diameter when ordering.Please order arbors separately
www.kawanlama.com 29ABRASIVE PRODUCT
CUT-
OFF
WH
EEL
CUT-OFF WHEELINOX Medium-Hard Type-Hardness Grade P (INOX)
Multipurpose tool of hardness grade P-INOX , for reduced heat build-up.PFERD product for cutting with low heat input. Provides fast stock removal and long tool life.
Abrasive : Aluminium oxide AManufactured without addition of ferrous, sulphurous and chlorinated fillers
Workpiece materials :Stainless steel (INOX)
Application :Cutting of steel metal, sectional and solid materials
Recommendation for use :Disc thickness 1,9/1,8/1,6/1,2/1,0mm for fast, convenient cutting with minimized burr formation. Disc thickness 2,5/2,4mm for universal cutting work. Disc thickness 3,2mm for maximum tool life and high lateral stability Suitable for angle grinders of all output levels.
Type EAN 4007220 EN-Designation DxT/UxH (mm(Inch)) Max.Speed (rpm)
Depressed Centre Type EH 100-3,2 A 46 P PSF-INOX/16.0 523018 4S A 46 P BF 80 100x3,2x16,0 (5/8) 15.300 25 1,450
EH 115-3,2 A 46 P PSF-INOX/22.23 523032 4S A 46 P BF 80 115x3,2x22,23 (5/8) 13.300 25 1,875EH 125-3,2 A 46 P PSF-INOX/22.23 523056 4S A 46 P BF 80 125x3,2x22,23 (7/8) 12.200 25 2,250EH 178-2,5 A 24 P PSF-INOX/22.23 523070 4S A 24 P BF 80 178x2,5x22,23 (7/8) 8.600 25 3,500EH 230-2,5 A 24 P PSF-INOX/22.23 523094 4S A 24 P BF 80 230x2,5x22,23 (7/8) 6.600 25 5,750
Flat Type EHTEHT 115-1,0 A 60 P PSF-INOX/22.23 560266 41 A 60 P BF 80 115x1,0x22,23 (7/8) 13.300 25 0,625EHT 115-1,2 A 60 P PSF-INOX/22.23 810293 41 A 60 P BF 80 115x1,2x22,23 (7/8) 13.300 25 0,775EHT 115-1,6 A 46 P PSF-INOX/22.23 538135 41 A 46 P BF 80 115x1,6x22,23 (7/8) 13.300 25 1,000EHT 115-1,8 A 46 P PSF-INOX/22.23 810309 41 A 46 P BF 80 115x1,8x22,23 (7/8) 13.300 25 1,220EHT 115-2,4 A 46 P PSF-INOX/22.23 523025 41 A 46 P BF 80 115x2,4x22,23 (7/8) 13.300 25 1,475EHT 125-1,0 A 60 P PSF-INOX/22.23 560372 41 A 60 P BF 80 125x1,0x22,23 (7/8) 12.200 25 0,750EHT 125-1,2 A 60 P PSF-INOX/22.23 810316 41 A 60 P BF 80 125x1,2x22,23 (7/8) 12.200 25 0,900EHT 125-1,6 A 46 P PSF-INOX/22.23 538142 41 A 46 P BF 80 125x1,6x22,23 (7/8) 12.200 25 1,175EHT 125-1,8 A 46 P PSF-INOX/22.23 810323 41 A 46 P BF 80 125x1,8x22,23 (7/8) 12.200 25 1,395EHT 125-2,4 A 46 P PSF-INOX/22.23 523049 41 A 46 P BF 80 125x2,4x22,23 (7/8) 12.200 25 1,625EHT 150-1,6 A 46 P PSF-INOX/22.23 581223 41 A 46 P BF 80 150x1,6x22,23 (7/8) 10.200 25 1,725EHT 178-1,6 A 46 P PSF-INOX/22.23 581230 41 A 46 P BF 80 178x1,6x22,23 (7/8) 8.600 25 2,325EHT 178-2,5 A 24 P PSF-INOX/22.23 523063 41 A 24 P BF 80 178x2,5x22,23 (7/8) 8.600 25 3,200EHT 230-1,9 A 46 P PSF-INOX/22.23 581216 41 A 46 P BF 80 230x1,9x22,23 (7/8) 6.600 25 4,625EHT 230-2,5 A 24 P PSF-INOX/22.23 523087 41 A 24 P BF 80 230x2,5x22,23 (7/8) 6.600 25 5,750
kg
Stone/Aluminium/ non-ferrous metal Medium-Hard Type-Hardness Grade P
Multipurpose tool of hardness grade P for cutting solid material. PFERD product characterized by aggressive cutting action and long tool life
Abrasive : Silicon Carbide C
Workpiece materials :Natural stone, synthetic stone, fire-resistant stone, aluminium, non-ferrous metals.
Application :Cutting of solid material
Recommendation for use :Disc thickness 1,6/1,0mm for fast, convenient cutting with minimized burr formation. Disc thickness 2,4mm for universal cutting work. Disc thickness 3,2/3,0mm for maximum tool life with high lateral stability. Suitable for angle grinders of all output levels.
Type EAN 4007220 EN-Designation DxT/UxH (mm(Inch)) Max.Speed (rpm)
Depressed Centre Type EH 100-2,4 C 30 P PSF-/16.0 523124 4S C 46 P BF 80 100x2,4x16,0 (5/8) 15.300 25 0,875
EH 115-2,4 C 30 P PSF-/22.23 163665 4S C 46 P BF 80 115x2,4x22,23 (7/8) 13.300 25 1,150EH 125-2,4 C 30 P PSF-/22.23 163597 4S C 46 P BF 80 125x2,4x22,23 (7/8) 12.200 25 1,375EH 150-3,0 C 24 P PSF-/22.23 523131 4S C 24 P BF 80 150x3,0x22,23 (7/8) 10.200 25 2,500EH 178-3,2 C 24 P PSF-/22.23 163603 4S C 24 P BF 80 178x3,2x22,23 (7/8) 8.600 25 3,500EH 230-3,2 C 24 P PSF-/22.23 163627 4S C 24 P BF 80 230x3,2x22,23 (7/8) 8.600 25 5,875
Flat Type EHTEHT 115-1,0 C 60 P PSF-/22.23 669310 41 C 60 P BF 80 115x1,0x22,23 (7/8) 13.300 25 0,625EHT 115-1,6 C 60 P PSF-/22.23 669297 41 C 46 P BF 80 115x1,6x22,23 (7/8) 13.300 25 1,100EHT 125-1,0 C 46 P PSF-/22.23 804278 41 C 60 P BF 80 125x1,0x22,23 (7/8) 12.200 25 0,850EHT 125-1,6 C 46 P PSF-/22.23 804308 41 C 46 P BF 80 125x1,6x22,23 (7/8) 12.200 25 1,175EHT 178-3,2C 24 P PSF-/22.23 163641 41 C 24 P BF 80 178x3,2x22,23 (7/8) 8.600 25 3,500EHT 230-3,2C 24 P PSF-/22.23 163658 41 C 24 P BF 80 230x3,2x22,23 (7/8) 8.600 25 5,875
kg
1
ABRASIVE PRODUCT30
1
Type EAN 4007220 EN-Designation DxT/UxH (mm(Inch)) Max.Speed (rpm)
Depressed Centre Type EH 115-2,4 A 46 R SG-INOX/22,23 162613 42 A 46 R BF 80 115x2,4x22,23 (7/8) 13.300 25 1,575EH 115-3,2 A 46 R SG-INOX/22,23 522868 42 A 46 R BF 80 115x3,2x22,23 (7/8) 13.300 25 1,950EH 125-2,4 A 46 R SG-INOX/22,23 162651 42 A 46 R BF 80 125x2,4x22,23 (7/8) 12.200 25 1,850EH 125-3,2 A 46 R SG-INOX/22,23 522882 42 A 46 R BF 80 125x3,2x22,23 (7/8) 12.200 25 2,200EH 178-2,5 A 24 R SG-INOX/22,23 162279 42 A 24 R BF 80 178x2,5x22,23 (7/8) 8.600 25 3,200EH 230-2,5 A 46 R SG-INOX/22,23 162316 42 A 24 R BF 80 230x2,5x22,23 (7/8) 6.600 25 6,000
Flat Type EHTEHT 100-1,0 A 60 R SG-INOX/16,0 511787 41 A 60 R BF 80 100x1,0x16,0 (5/8) 15.300 25 0,550
EHT 115-1,0 A 60 R SG-INOX/22,23 499702 41 A 60 R BF 80 115x1,0x22,23 (7/8) 13.300 25 0,625EHT 115-1,2 A 60 R SG-INOX/22,23 810330 41 A 60 R BF 80 115x1,2x22,23 (7/8) 13.300 25 0,775EHT 115-1,6 A 46 R SG-INOX/22,23 355442 41 A 46 R BF 80 115x1,6x22,23 (7/8) 13.300 25 1,100EHT 115-1,8 A 46 R SG-INOX/22,23 810354 41 A 46 R BF 80 115x1,8x22,23 (7/8) 13.300 25 1,220EHT 115-2,4 A 46 R SG-INOX/22,23 522851 41 A 60 R BF 80 115x2,4x22,23 (7/8) 13.300 25 1,575
CUT-
OFF
WH
EEL
CUT-OFF WHEELPerformance Line SG-ELASTICSteel Hard Tyoe-Hardness Grade S
Performance tool in hardness grade S.PFERD product with high cutting capabilities and excellent tool life.
Abrasive : Aluminium Oxide A
Workpiece materials :Steel
Application :Cutting of metal, sheet profiles and solid materials
Recommendation for use :Disc thickness 1,9/1,6/1,0mm for fast, convenient with minimized burr formation. Disc thickness 2,4mm for universall cutting work. Disc thickness 3,2/3,0/2,9mm for maximum tool life with high lateral stability. Suitable for angle grinders of all outputy levels.
Type EAN 4007220 EN-Designation DxT/UxH (mm(Inch)) Max.Speed (rpm)
Depressed Centre Type EH 100-2,4 A 46 S SG/16.0 162576 42 A 46 S BF 80 100x2,4x16,0 (5/8) 15.300 25 1,175
EH 115-2,4 A 30 S SG/22.23 162606 42 A 30 S BF 80 115x2,4x22,23 (7/8) 13.300 25 1,575EH 115-3,2 A 30 S SG/22.23 522424 42 A 30 S BF 80 115x3,2x22,23 (7/8) 13.300 25 1,900EH 125-2,4 A 30 S SG/22.23 162217 42 A 30 S BF 80 125x2,4x22,23 (7/8) 12.200 25 1,850EH 125-3,2 A 30 S SG/22.23 522431 42 A 30 S BF 80 125x3,2x22,23 (7/8) 12.200 25 2,125EH 150-3,0 A 24 S SG/22.23 162255 42 A 24 S BF 80 150x3,0x22,23 (7/8) 10.200 25 3,050EH 178-2,9 A 24 S SG/22.23 522653 42 A 24 S BF 80 178x2,9x22,23 (7/8) 8.600 25 4,000EH 178-3,2 A 24 S SG/22.23 162262 42 A 24 S BF 80 178x3,2x22,23 (7/8) 8.600 25 4,375EH 230-2,9 A 24 S SG/22.23 522684 42 A 24 S BF 80 230x2,9x22,23 (7/8) 6.600 25 6,625EH 230-3,2 A 24 S SG/22.23 162309 42 A 24 S BF 80 230x3,2x22,23 (7/8) 6.600 25 7,125
Flat Type EHTEHT 100-2,4 A 46 S SG/16,0 162590 41 A 46 S BF 80 100x2,4x16,0 (5/8) 15.300 25 1,025
EHT 115-1,0 A 60 S SG/22,23 499719 41 A 60 S BF 80 115x1,0x22,23 (7/8) 13.300 25 0,625EHT 115-1,6 A 46 S SG/22,23 522813 41 A 46 S BF 80 115x1,6x22,23 (7/8) 13.300 25 1,150EHT 115-2,4 A 30 S SG/22,23 162637 41 A 30 S BF 80 115x2,4x22,23 (7/8) 13.300 25 1,575EHT 125-1,0 A 60 S SG/22,23 499740 41 A 60 S BF 80 125x1,0x22,23 (7/8) 12.200 25 0,750EHT 125-1,6 A 46 S SG/22,23 522691 41 A 46 S BF 80 125x1,6x22,23 (7/8) 12.200 25 1,175EHT 125-2,4 A 30 S SG/22,23 162231 41 A 30 S BF 80 125x2,4x22,23 (7/8) 12.200 25 1,850EHT 150-3,0 A 24 S SG/22,23 162248 41 A 24 S BF 80 150x3,0x22,23 (7/8) 10.200 25 3,050EHT 178-1,6 A 46 S SG/22,23 581155 41 A 46 S BF 80 178x1,6x22,23 (7/8) 8.600 25 2,325EHT 178-2,9 A 24 S SG/22,23 522639 41 A 24 S BF 80 178x2,9x22,23 (7/8) 8.600 25 4,000EHT 178-3,2 A 24 S SG/22,23 162347 41 A 24 S BF 80 178x3,2x22,23 (7/8) 8.600 25 4,375EHT 230-1,9 A 46 S SG/22,23 581162 41 A 46 S BF 80 230x1.9x22,23 (7/8) 6.600 25 4,625EHT 230-2,9 A 24 S SG/22,23 522677 41 A 24 S BF 80 230x2,9x22,23 (7/8) 6.600 25 6,625EHT 230-3,2 A 24 S SG/22,23 162422 41 A 24 S BF 80 230x3,2x22,23 (7/8) 6.600 25 7,300
INOX Hard Type - Hardness Grade R
Multipurpose tool of hardness grade R-INOX, for reduce heat build-up. PFERD product charcterized by aggressive cutting performance and very long tool life
Abrasive : Aluminium Oxide AManufactured without addition of ferrous, sulphurous and chlorinated fillers.
Workpiece materials :Stainless Steel (INOX)
Application :Cutting of metal, sheet profiles and solid materials
Recommendation for use :Disc thickness 1,9/1,8/1,6/1,2/1,0mm for fast, convenient with minimized burr formation. Disc thickness 2,5/2,4/2,0mm for universall cutting work. Disc thickness 3,2mm for maximum tool life with high lateral stability.
kg
kg
*See the next detail at the next page
www.kawanlama.com 31ABRASIVE PRODUCT
CUT-OFF WHEEL FOR STATIONARY MACHINE
Steel
CHOPSAWFor cutting sections (steel and solid materials) on field-use machines with a max. power output up to 3 KW
Stainless Steel (INOX)
Order No. Type Dimension [mm (Inch)] Max. Speed (rpm)
PF0001479 80 T 350-2.8 A 36 K SG-CHOP 350 x 2.8 x 25.4 (1”) 4400 10PF0001994 80 T 400-3.8 A 36 K SG-CHOP 400 x 3.8 x 25.4 (1”) 3800 10
Chopsaw < 3KW
T
Order No. Type Dimension [mm (Inch)] Max. Speed (rpm)
PF0001995 80 T 400-2.8 A 36 K SG-CHOP-INOX 400 x 2.8 x 25.4 (1”) 3800 10
Multipurpose tool of hardness grade K for abrasive cutting. Characterized by aggressive, cool cutting performance for fast results and very long tool life.
Abrasive: Aluminium oxideManufactured without addition of ferrous, sulphurous or chlorinated fillers
Workpiece materialsStainless steel (INOX)
ApplicationCutting of sections and solid material
Recommendation for useProvides excellent cutting result on machines with up to 3KW ouput
Multipurpose tool of hardness grade K for abrasive cutting operations using stationary machines. Characterized by aggressive, cool cutting performance for fast results and very long to life.
Abrasive: Aluminium oxide
Workpiece materialsSteel
ApplicationCutting of sections and solid material
Recommendation for useProvides excellent cutting result on machines with up to 3KW ouput
CUT-OFF WHEELINOX Hard Type - Hardness Grade R
Type EAN 4007220 EN-Designation DxT/UxH (mm(Inch)) Max.Speed (rpm)
EHT 125-1,0 A 60 R SG-INOX/22,23 499733 41 A 60 R BF 80 125x1,0x22,23 (7/8) 12.200 25 0,750EHT 125-1,2 A 60 R SG-INOX/22,23 810361 41 A 46 R BF 80 125x1,2x22,23 (7/8) 12.200 25 0,900EHT 125-1,6 A 46 R SG-INOX/22,23 355459 41 A 46 R BF 80 125x1,6x22,23 (7/8) 12.200 25 1,225EHT 125-1,8 A 46 R SG-INOX/22,23 810378 41 A 46 R BF 80 125x1,8x22,23 (7/8) 12.200 25 1,395EHT 125-2,4 A 46 R SG-INOX/22,23 522875 41 A 46 R BF 80 125x2,4x22,23 (7/8) 12.200 25 1,850EHT 150-1,6 A 46 R SG-INOX/22,23 581179 41 A 46 R BF 80 150x1,6x22,23 (7/8) 10.200 25 1,725EHT 178-1,6 A 46 R SG-INOX/22,23 807729 41 A 46 R BF 80 178x1,6x22,23 (7/8) 8.600 25 2,325EHT 178-1,8 A 46 R SG-INOX/22,23 581186 41 A 46 R BF 80 178x1,8x22,23 (7/8) 8.600 25 2,500EHT 178-2,5 A 24 R SG-INOX/22,23 162378 41 A 46 R BF 80 178x2,5x22,23 (7/8) 8.600 25 3,300EHT 230-1,9 A 46 R SG-INOX/22,23 807736 41 A 46 R BF 80 230x1,9x22,23 (7/8) 6.600 25 4,050EHT 230-2,0 A 46 R SG-INOX/22,23 581193 41 A 46 R BF 80 230x2,0x22,23 (7/8) 6.600 25 4,625EHT 230-2,5 A 24 R SG-INOX/22,23 162446 41 A 24 R BF 80 230x2,5x22,23 (7/8) 6.600 25 6,000EHT 230-3,2 A 24 R SG-INOX/22,23 475690 41 A 24 R BF 80 230x3,2x22,23 (7/8) 6.600 25 7,150
CUT-
OFF
WH
EEL
FOR
STAT
ION
ARY
MA
CHIN
E
T
Your #1 source for ...
Safety Equipment
19SectionSection
kg
1
ABRASIVE PRODUCT32
1
POLI
FAN
FLA
P D
ISC
POLIFAN FLAP DISC
Type SG-AMetal/Platic/Wood
Abrasive: Aluminium oxideGrit sizes: 40, 60, 80, 120
Workpiece materialsMetals, plastics, wood
ApplicationSurface grinding, edge grinding
Order No. Type Grit Size Dimension[mm (Inch)]
Max. Speed (rpm) -
PF0001500 PFF 100 A 40 SG 40 100 x 15 x 16.0 (5/8”) 15300 10PF0000786 PFF 100 A 60 SG 60 100 x 15 x 16.0 (5/8”) 15300 10PF0000787 PFF 100 A 80 SG 80 100 x 14 x 16.0 (5/8”) 15300 10PF0001165 PFF 100 A 120 SG 120 100 x 13 x 16.0 (5/8”) 15300 10
PERFORMANCE LINE SGFeatures :POLIFAN Flap Disc can offer advantages over reinforce grinding wheel where a superior surface finish must be achieved in addition to high stock removal rates.
Benefits :• High grinding efficiency and excellent surface finish combine in a single grinding
operation• Extremely long service life• Silent operation, soft, cool cutting properties• Reduce operator fatigue• Low Vibration
Type SGP - ZIRCON -SPECIALSteel/Stainless Steel (INOX)
Order No. Type Grit Size Dimension[mm (Inch)]
Max. Speed (rpm) -
PF0001166 PFF 100 Z 40 SGP-SPECIAL 40 100 x 15 x 16.0 (5/8”) 15300 10PF0000794 PFF 100 Z 60 SGP-SPECIAL 60 100 x 14 x 16.0 (5/8”) 15300 10
Versatile tool for general professional use. Suitable for angle grinder of all output categories.Characterized by aggressive grinding action and outstanding to life.
Recommendation for useAchieved very high stock removall rates even at low contact pressure.
Special purpose tool for demanding surface grinding tasks.Characterized by aggressive grinding action and long tool life
Abrasive: Zirconia aluminaGrit sizes: 24, 40, 60, 80
Workpiece materialsSteel, Stainless steel (INOX)
ApplicationSurface grinding, Weld dressing, edge finishing
Recommendation for useThe use of zirconia alumina a high performance abrasive grain, in conjunction with the dense flap structure require a high output angle grinder to achieve optimum grinding result.
Grinding and Cut-off WheelsThree steps to select the correct tool
â Material ê Power tool ô Application/task û Tool
In order to ensure the most cost-efficient use of grinding and cut off wheels for hard-held power tools, it is necessary to select the right tool for the individual application.In our application recommendations for grinding and cut-off wheels we have
taken in to account the power output (watts) of the most common angle grinders in relation to the material and machining task at hand. This distinction is reflected in the following table.
www.kawanlama.com 33ABRASIVE PRODUCT
POLIFAN FLAP DISCSteel/INOX/Plastic Type PSF A
POLI
FAN
FLA
P D
ISCVersatile tool for multi-purpose grinding tasks. PFERD product characterized
by aggressive grinding performance and long tool life. Optimizes inventory management due to its suitability for many metarials.
Abrasive : Aluminium oxide AGrit sizes : 40, 60, 80, 120
Workpiece materials :Steel, stainless steel (INOX), plastic
Application :Surface ginding, work on weld seams
Recommendation for use :Achieves very good grinding results even at low contact pressure. Suitable for angle grinders of all output categories
Type EAN 4007220 Grit Size DxTxH (mm(Inch)) Max.Speed (rpm)
Flat Type PFFPFF 115 A 40 PSF/22,23 512388 40 115x16x22,23 (7/8) 13.300 10 0,990PFF 115 A 60 PSF/22,23 512395 60 115x15x22,23 (7/8) 13.300 10 0,880PFF 115 A 80 PSF/22,23 512401 80 115x15x22,23 (7/8) 13.300 10 0,770
PFF 115 A 120 PSF/22,23 512418 120 115x13x22,23 (7/8) 13.300 10 0,750PFF 125 A 40 PSF/22,23 512425 40 125x16x22,23 (7/8) 12.200 10 1,080PFF 125 A 60 PSF/22,23 512432 60 125x15x22,23 (7/8) 12.200 10 1,000PFF 125 A 80 PSF/22,23 512449 80 125x13x22,23 (7/8) 12.200 10 0,870
PFF 125 A 120 PSF/22,23 512456 120 125x13x22,23 (7/8) 12.200 10 0,840PFF 180 A 40 PSF/22,23 512463 40 180x16x22,23 (7.8) 8.500 10 2,660
Conical Type PFCPFC 115 A 40 PSF/22,23 444559 40 115x15x22,23 (7/8) 13.300 10 0,950PFC 115 A 60 PSF/22,23 444566 60 115x14x22,23 (7/8) 13.300 10 0,870PFC 115 A 80 PSF/22,23 444573 80 115x14x22,23 (7/8) 13.300 10 0,780
PFC 115 A 120 PSF/22,23 444580 120 115x12x22,23 (7/8) 13.300 10 0,730PFC 125 A 40 PSF/22,23 444603 40 125x15x22,23 (7/8) 12.200 10 1,060PFC 125 A 60 PSF/22,23 444610 60 125x14x22,23 (7/8) 12.200 10 1,010PFC 125 A 80 PSF/22,23 444627 80 125x14x22,23 (7/8) 12.200 10 0,900
PFC 125 A 120 PSF/22,23 444634 120 125x12x22,23 (7/8) 12.200 10 0,860PFC 180 A 40 PSF/22,23 444689 40 180x15x22,23 (7/8) 8.500 10 2,540PFC 180 A 60 PSF/22,23 444696 60 180x14x22,23 (7.8) 8.500 10 2,440
kg
Steel / INOX / Type PSF ZIRKONTool for demanding general-purpose applications. PFERD product chracterized by aggressive grinding and long service life, particularly when used for edge grinding.
Abrasive : Zirconia alumina ZGrit sizes : 40, 60, 80
Workpiece materials :Steel, stainless steel (INOX)
Application :Surface ginding, work on weld seams
Recommendation for use :Optimum stock removal rates are achieved with high-powered angle grinders used at higher application pressures
Type EAN 4007220 Grit Size DxTxH (mm(Inch)) Max.Speed (rpm)
Flat Type PFFPFF 115 Z 40 PSF/22,23 512487 40 115x15x22,23 (7/8) 13.300 10 0,850PFF 115 Z 60 PSF/22,23 512494 60 115x14x22,23 (7/8) 13.300 10 0,800PFF 115 Z 80 PSF/22,23 512500 80 115x14x22,23 (7/8) 13.300 10 0,780PFF 125 Z 40 PSF/22,23 512517 40 125x15x22,23 (7/8) 12.200 10 1,000PFF 125 Z 60 PSF/22,23 512524 60 125x14x22,23 (7/8) 12.200 10 0,920PFF 125 Z 80 PSF/22,23 512531 80 125x14x22,23 (7/8) 12.200 10 0,900PFF 180 Z 40 PSF/22,23 512548 40 180x15x22,23 (7/8) 8.500 10 2,400PFF 180 Z 60 PSF/22,23 512555 60 180x15x22,23 (7/8) 8.500 10 2,230
Conical Type PFCPFC 115 Z 40 PSF/22,23 377352 40 115x14x22,23 (7/8) 13.300 10 0,850PFC 115 Z 60 PSF/22,23 444597 60 115x14x22,23 (7/8) 13.300 10 0,800PFC 115 Z 80 PSF/22,23 377369 80 115x14x22,23 (7/8) 13.300 10 0,760PFC 125 Z 40 PSF/22,23 377345 40 125x14x22,23 (7/8) 12.200 10 1,000PFC 125 Z 60 PSF/22,23 444078 60 125x14x22,23 (7/8) 12.200 10 0,950PFC 125 Z 80 PSF/22,23 377338 80 125x14x22,23 (7/8) 12.200 10 0,890PFC 150 Z 40 PSF/22,23 805923 40 150x14x22,23 (7/8) 10.200 10 1,750PFC 150 Z 60 PSF/22,23 805930 60 150x14x22,23 (7/8) 10.200 10 1,700PFC 180 Z 40 PSF/22,23 377321 40 180x14x22,23 (7/8) 8.500 10 2,300PFC 180 Z 60 PSF/22,23 444085 60 180x14x22,23 (7.8) 8.500 10 2,260
kg
1
ABRASIVE PRODUCT34
1
IND
UST
RIA
L BR
USH
BRUSHING
MOUNTED BRUSH
Features :• Long tool life, due to high quality wire of high flexibility and flexural
strength• High concentricity, due to even distributed and securely attached of
fill wires• Optimum finishing result, due to close matching of brush body and
visible trim length• Good value for money
Benefits :• Deburring, especially removal of secondary burrs produced by milling,
grinding, turning or drilling• Surface Cleaning - Removal of rust or scale - Cleaning, removal of paint coatings, etc. - Weld conditioning• Surface Finishing - Matt finishing, burnishing - Roughening, texturing - Grinding (SiC filament brushes)
Wire Brush - Crimped Steel Wire
Order No. TypeWire Size
(mm)
Brush Dia.
(mm)
Trim Width (mm)
Trim Length (mm)
Shank Dia.
(mm)
Recom.Speed(rpm)
PF0000504 RBU 2004 0.2 20 4 3 6 20000 10PF0000507 RBU 3006 0.2 30 6 6.5 6 20000 10PF0000509 RBU 4009 0.2 40 9 9 6 18000 10PF0000510 RBU 5015 0.2 50 15 12.5 6 15000 10PFZ000313 RBU 6015 0.2 60 15 15 6 15000 10PFZ000314 RBU 7010 0.3 70 10 19 6 15000 10PF0000514 RBU 7015 0.3 70 15 19 6 15000 10PF0000516 RBU 8015 0.3 80 15 19 6 12000 10PFZ000315 RBU 10010 0.3 100 10 20 6 4500 10
Ordering note : We are available in Stainless steel wire, brass wire, plastic (SIC).
Wire Brush - Knotted Steel Wire
Order No. TypeDia. x Width (mm)
Shank Dia.
(mm)
Trim Length (mm)
Wire Size
(mm)Wire
Recom.Speed(rpm)
PF0000515 RBG 7006 70 x 6 6 16 0.3 steel 12500-18800 10PFZ000316 RGB 7006 70 x 6 6 16 0.5 steel 12500-18800 10PFZ000317 RGB 7012 70 x 12 6 16 0.35 steel 12500-18800 10PFZ000318 RGB 7012 70 x 12 6 16 0.5 steel 12500-18800 10PFZ000319 RGB 10012 100x12 6 19 0.35 steel 10000-15000 10
Ordering note : We are available in Stainless steel wire.
Wire End Brush - Crimped Steel Wire
Order No. TypeWire Size
(mm)
Brush Dia.
(mm)
Total Length (mm)
Trim Length (mm)
Shank Dia.
(mm)
Recom.Speed(rpm)
PF0000511 PBU 1010 0.2 10 70 20 6 10000-15000 10PFZ000320 PBU 1212 0.2 12.7 65 20 6 10000-15000 10PFZ000321 PBU 1516 0.2 15 65 22 6 9000-13500 10PF0000512 PBU 1516 0.35 15 65 22 6 9000-13500 10PFZ000322 PBU 2020 0.2 20 70 25 6 9000-13500 10PF0000508 PBU 2020 0.5 20 70 25 6 9000-13500 10PFZ000323 PBU 3029 0.5 30 70 25 6 7500-11300 10PF0000513 PBU 3029 0.5 30 70 25 6 7500-11300 10
Mounted Cup Brushes - Crimped Steel Wire
Order No. TypeWire Size
(mm)
Brush Dia.
(mm)
Total Length (mm)
Trim Width (mm)
Trim Length (mm)
Shank Dia.
(mm)
Recom.Speed(rpm)
PF0001455 TBU 5010 0.3 50 75 10 20 6 4200-6800 10PFZ000324 TBU 6015 0.3 60 85 15 20 6 3000-4500 10
Ordering note : We are available in Stainless steel wire, brass wire, plastic (SIC).
Ordering note : We are available in Stainless steel wire, plastic (SIC).
Safety Recommendations• Never exeed the stated maximum rpm levels !• Wear safety glasses and safety clothing !
• Read the instructions !• Use machine guard or safety hoods !
www.kawanlama.com 35ABRASIVE PRODUCT
IND
UST
RIA
L BR
USH
WHEEL BRUSH
Wire Wheel Brushes - Crimped Steel Wire
Order No. TypeWire Size
(mm)
Dia. x Width (mm)
Center Hole Dia.
(mm)
Trim Length (mm)
Recom.Speed(rpm)
RBU 10020 0.3 100 x 20 14 24 4000 - 6000 1PF0000506 RBU 10028 0.3 100 x 28 14 24 4000 - 6000 1PF0001265 RBU 15038 0.3 150 x 38 22.2 25 3000 - 4500 1PFZ000418 RBU 18025 0.3 180 x 25 22.2 40 2500 - 4000 1PFZ000419 RBU 20025 0.3 200 x 25 22.2 38 2300 - 3400 1PFZ000420 RBU 25030 0.3 250 x 30 22.2 50 1800 - 2700 1PFZ000421 RBU 30040 0.3 300 x 40 22.2 40 1500 - 2500 1
Other center hole sizes on request.
Excellent for medium duty brushing (hand held or stationary), of large surface areas.
RBU = Wheel brush, individual filament type.
Recommendation for useSuitable drive systems: bench grinder, stationary machines, flexible shafts. Tool contact pressure should be kept low. Ensure that work-piece contact is made by wire end only
Adaptor pairs AM 51
Order No. Type Center Hole Dia. (mm)
PFZ000422 AM 51/16 14 1PFZ000423 AM 51/25.4 25.4 1
Adaptor pairs AM 51
*** Stainless steel wire brushes on request.
BRUSHING
Wheel Brushes, COMBITWIST®
Order No. DescriptionWire Size
(mm)No. of Knots
Dia. x Width (mm)
Center Hole Dia. mm
(Inch)
Trim Length (mm)
Recom.Speed(rpm)
PF0001266 RGB 11512 0.5 24 115 x 12 22.2 (7/8”) 28 6300-12500 1PF0000958 RGB 17813 0.5 30 178 x 13 22.2 (7/8”) 42 4500-8500 1
Other center hole sizes on request.
Flaring Cub Brushes with threaded hole COMBITWIST®
Order No. DescriptionWire Size
(mm)No. of Knots
Dia. x Width (mm)
Center Hole Dia. (mm)
Trim Length (mm)
Recom.Speed(rpm)
PF0001746 KBG 10013 0.5 22 100 x 13 M14 22 9000 - 15000 1PFZ000424 KGB 12515 0.5 28 125 x 15 M14 19 7500 -11000 1
Advantages of the new COMBITWIST® knot style:• Smooth operation, even on corners and edges• No “recoiling” of the brush on edges• Enhanced tool life• Increased stock removal rate• Prevention of the knotting becoming “unravelled” in use
Suitable for removing rust, descaling, weld dressing, deburing.Its conical shape make this tool ideal for work in hard-to-reach areas. Highly versatile, especially with difficult work.
Recommendation for use:For heavy duty use on angle grinders at elevated speeds (up to 80m/s).
Ordering note : We are available in Stainless steel wire.
WHEEL BRUSH AND CUP BRUSH
1
ABRASIVE PRODUCT36
1
IND
UST
RIA
L BR
USH
CUP BRUSHCup Brush - Knotted Steel Wire
Order No. Type Wire Size(mm)
Brush Dia.(mm)
Trim Length(mm) Thread Recom. Speed
(rpm)PF0001888 TBG 65 0.35 65 22 M14 6300-12500 1PFZ000425 TBG 80 0.50 80 25 M14 4300-8500 1PFZ000426 TBG 100 0.50 100 25 M14 4300-8500 1PFZ000427 TBG 125 0.50 125 25 5/8 3300-6500 1PFZ000428 TBG 150 0.50 150 20 5/8 2800-5500 1
**** Without supporting ring
Excellent for heavy duty brushing, mainly on large surfaces, and for deburring, cleaning and rust removal.These brushes are characterized by their particularly aggressive abrasive action. The supproting ring prevents filaments from escaping sideways. The ring is removed once the fill rest of the brush can be used up normally.Recommendation for useSuitable drive systems: stationary machines, angle grinders. When using angle grinders, please observe permitted rpm limit.
Ordering note : We are available in Stainless steel wire
Cup Brush - Crimped Steel Wire
Order No. TypeWire Size
(mm)
BrushDia.
(mm)
Trim Length(mm)
ThreadRecom.Speed(rpm)
PF0001962 TBU 60 0.3 60 20 M 14 6300-9400 1PF0001263 TBU 75 0.3 75 30 M 14 6300-9000 1PF0001212 TBU 100 0.3 100 25 M 14 4300-6400 1
Cup Brushes - Crimped Steel Wire
Order No. TypeWire Size
(mm)
BrushDia.
(mm)
Trim Length(mm)
ThreadRecom.Speed(rpm)
PFZ000429 TBU 75 (INOX) 0.3 75 40 M 14 5000-8100 1PFZ000430 TBU 100 (INOX) 0.3 100 25 M 14 3400-5500 1
Cup Brushes - Stainless Steel (INOX) Wire
BRUSHING
Scratch Brush for File
Order No. Type Wire Dia.(mm)
Trim Length(mm)
Wire Overall-Length(mm)
PF0000519 HBF 10 ST 0.15 7.0 Steel 232 5
Scratch brush for cleaning files
Scratch Brush
Order No. Type Wire Dia.(mm)
Trim Length(mm)
Overall Length(mm) Wire
PF0002043 HBG 10 ST 0.3 25 265 Steel 10PF0000520 HBG 10 INOX 0.3 25 265 Stainless Steel 10PFZ000431 HBG 10 MES 0.3 25 265 Brass 10
Excellent for cleaning in hard-to-reach areas, e.g., angle or corners, pipes, etc.
www.kawanlama.com 37ABRASIVE PRODUCT
IND
UST
RIA
L BR
USH
ES
ABR
ASI
VE
AN
D F
INIS
HIN
G P
ROD
UCT
Order No. Type Description
KW0300232 KW03-232 Flap Disc Aluminium Oxide 100 x 16mm #40
KW0300233 KW03-233 Flap Disc Aluminium Oxide 100 x 16mm #80
KW0300234 KW03-234 Flap Disc Aluminium Oxide 100 x 16mm #120
Features :Grain : aluminium oxide refinedBonding : resin over resinVersion : flat formPattern : single tapBacking : glass fibre reinforced
KW03-232 KW03-233 KW03-234
#40 #80 #120
Specification
Diameter x Bore in (mm) 100 x 16Grit Sizes Available : 40 80 120Max. Operating Peripheral Speed (m/s) 80Max. Revolution per minute (rpm) 15,300Packaging (Quality/Pack) (Units/pcs.) 10
ABRASIVE AND FINISHING PRODUCT
Aluminium Oxide for Steel, Wood and Plastic
Order No. Type DescriptionKW0300235 KW03-235 Flap Disc Zirconium Oxide 100 x 16mm #40KW0300236 KW03-236 Flap Disc Zirconium Oxide 100 x 16mm #80KW0300237 KW03-237 Flap Disc Zirconium Oxide 100 x 16mm #120
Features :Grain : zirconium oxideBonding : resin over resinVersion : flat formPattern : single tapBacking : glass fibre reinforced
SpecificationDiameter x Bore in (mm) 100 x 16Grit Sizes Available : 40 80 120Max. Operating Peripheral Speed (m/s) 80
Max. Revolution per minute (rpm) 15,300Packaging (Units/pack) 10
KW03-235 KW03-236 KW03-237
#40 #80 #120
Aluminium Oxide For Steel, Wood, and Plastic
ABRASIVE
1
ABRASIVE PRODUCT38
1
FIBER AND PAPER DISCA
BRA
SIV
E A
ND
FIN
ISH
ING
PRO
DU
CT
Specification KW03-270 KW03-271 KW03-272Dimension (mm) 105 x 2 x 16 350 x 3 x 25.4 400 x 3 x 25.4Dimension (Inch) 4/7 x 5/64 x 5/8 14 x 1/8 x 1 16 x 1/8 x 1ShapeSpeed (rpm) 13,700 3,900 3,400Cut. Speed (m/s) 72 72 72
Order No. Type DescriptionKW0300270 KW03-270 Cut Off Wheel 105 x 2 x 16mm (4”)KW0300271 KW03-271 Cut Off Wheel 350 x 3 x 25.4mm (14”)KW0300272 KW03-272 Cut Off Wheel 400 x 3 x 25.4mm (16”)
KW03-272
KW03-270KW03-271
Features :• General purpose disc for all metal cutting application• Made from precious corundum • Medium hard bond for an optimal ratio between performance and
disc life
Order No. Type DescriptionKW0300032 KW03-32 Fiber Disc Aluminium Oxide 4x5/8” #A80KW0300033 KW03-33 Fiber Disc Aluminium Oxide 4x5/8” #A120
Features :• General purpose disc for all metal
grinding application• Medium hard bond for an
optimal ratio between grinding performance and disc life
Fiber Disc Aluminium Oxide
CUTTING WHEELCut Off Wheel
Order No. Type Description
KW0300273 KW03-273 Superthin Cutting Wheel 105 x 1 x 16mm (4”)
Features :• Super thin fast-cut cutting disc • Made of precious corundum• The high-performance A60 range
for metals and stainless steel
SpecificationDimension (mm) 105 x 1 x 16Dimension (Inch) 4 x 1/24 x 5/8ShapeSpeed (rpm) 15,300Cut. Speed (m/s) 80
KW03-273
Order No. Type Description
KW0300278 KW03-278 Flexible Depressed Centre Wheel for Metal 102 x 3 x 16mm (4”)
KW0300279 KW03-279 Flexible Depressed Centre Wheel for Stainless Steel 102 x 3 x 16mm (4”)
KW0300280 KW03-280 Flexible Depressed Centre Wheel for Stone and Glass 102 x 3 x 16mm (4”)
Key points for best results :• Hold your right angle grinder at 15o for
curvature surface grinding• Run the cut-off wheel at the highest possible
speed marked on the wheel
Specification KW03-278 KW03-279 KW03-280
Dimension (mm) 102 x 3 x 16 102 x 3 x 16 102 x 3 x 16
Dimension (Inch) 4 x 1/8 x 5/8 4 x 1/8 x 5/8 4 x 1/8 x 5/8
Shape
Speed (rpm) 13,700 13,700 13,700
Cut. Speed (m/s) 72 72 72
Features for KW03-280 :• Special discs for glass and stone• Made of silicon carbide
Features for KW03-278 :• Special discs for castings made
of iron, steel, non-ferrous metals and common metals
• Made of aluminium oxide
KW03-278
Metal Stainless Steel
Features for KW03-279 :• Special discs for stainless steel• Made of semi precious and
corundum zirconium oxide
KW03-279 KW03-280
Stone and Glass
Superthin Cutting Wheel
FLEXIBLE DEPRESSED CENTRE WHEEL
www.kawanlama.com 39ABRASIVE PRODUCT
DEPRESSED CENTER WHEEL
ABR
ASI
VE
FOR
CAST
IRO
N A
ND
STE
EL
KW03-251 KW03-252
Features :• General purpose disc for all metal grinding
applications• Made from aluminium oxide• Medium hard bond. For an optimal ratio
between grinding performance and disc life
Order No. Type Description
KW0300251 KW03-251 Depressed Centre Wheel 150 x 6 x 22.2mm (6”)
KW0300252 KW03-252 Depressed Centre Wheel 180 x 6 x 22.2mm (7”)
Specification KW03-251 KW03-252Dimension (mm) 150 x 6 x 22.2 180 x 6 x 22.2Dimension (Inch) 6 x 1/4 x7/8 7 x 1/4 x 7/8
ShapeSpeed (rpm) 10,200 8,500Cut. Speed (m/s) 80 80
KW03-277KW03-276KW03-275KW03-274
Features :• General purpose disc for all metal grinding
applications• Made from brown fused aluminium oxide• Medium hard bond for an optimal ratio
between grinding performance and disc life
Order No. Type DescriptionKW0300274 KW03-274 Depressed Centre Wheel 100 x 6 x 16mm (4”) KW0300275 KW03-275 Depressed Centre Wheel 125 x 6 x 22.23mm (5”) KW0300276 KW03-276 Depressed Centre Wheel 150 x 6 x 22.23mm (6”) KW0300277 KW03-277 Depressed Centre Wheel 180 x 6 x 22.23mm (7”)
Specification KW03-274 KW03-275 KW03-276 KW03-277Dimension (mm) 100 x 6 x 16 125 x 6 x 22.23 150 x 6 x 22.23 180 x 6 x 22.23Dimension (Inch) 4 x 1/4 x 5/8 5 x 1/4 x 7/8 6 x 1/4 x7/8 7 x 1/4 x 7/8
ShapeSpeed (rpm) 13,700 11,000 10,000 8,500Cut. Speed (m/s) 72 72 72 72
For General Steel
Features :• General purpose disc for all cast iron material :
FC, FCD• Made from aluminium oxide• Custom reinforced resinoid bond for an optimal
ratio between grinding performance and disc life
Order No. Type DescriptionKW0300281 KW03-281 Depressed Centre Wheel 100 x 6 x 16mm (4”) F/Cast IronKW0300282 KW03-282 Depressed Centre Wheel 125 x 6 x 22.23mm (5”) F/Cast IronKW0300283 KW03-283 Depressed Centre Wheel 150 x 6 x 22.23mm (6”) F/Cast IronKW0300284 KW03-284 Depressed Centre Wheel 180 x 6 x 22.23mm (7”) F/Cast Iron
Specification KW03-281 KW03-282 KW03-283 KW03-284Dimension (mm) 100 x 6 x 16 125 x 6 x 22.23 150 x 6 x 22.23 180 x 6 x 22.23Dimension (Inch) 4 x 1/4 x 5/8 5 x 1/4 x 7/8 6 x 1/4 x7/8 7 x 1/4 x 7/8
ShapeSpeed (rpm) 13,700 11,000 10,000 8,500Cut. Speed (m/s) 72 72 72 72
KW03-281 KW03-282 KW03-283KW03-284
Depressed Center Wheel for Cast Iron
1
ABRASIVE PRODUCT40
1Order No. Type Description
KW0300261 KW03-261 Diamond Electro Coated Gold 105 x 20 /16mm
KW0300262 KW03-262 Diamond Electro Coated Gold 105 x 20 /16mm
KW03-261
For Dry Grinding
KW03-262
Features :• Flat surface• Titanium coated• Ideal for grinding on
glass, ceramic, metal, and composite material
Features :• Convex surface• Titanium coated• Ideal for grinding on glass,
ceramic, metal, and composite material
Order No. Type Description
KW0300258 KW03-258 Diamond Cutter Blade Gold 105 x 2.2 x 7x20/16mm
KW0300259 KW03-259 Diamond Cutter Blade Green 105 x 2.2 x 7x 20/16mm
KW0300260 KW03-260 Diamond Cutter Blade Cyan 105 x 1.2 x 7 x 20/16mm
Cutting CapacityWet : 110mDry : 60 ~ 80m
Cutting CapacityWet : 90mDry : 60m
Cutting CapacityWet : 120mDry : 70 ~ 90m
Ideal for Cutting :• Concrete• Tile• Stone
KW03-258 KW03-259 KW03-260
For Wet Application Ideal for cutting :Concrete, marble, brick, granite and asphalt
For Dry and Wet Application Ideal for cutting :Natural and artificial stone, brick, granite, reinforced concrete, marble, fiberglass applied for wet and dry cutting
Order No. Type Description Max. Speed
KW0300256 KW03-256 Diamond Wheel Turbo Wet 105mm (4”) 14,500rpm
KW0300257 KW03-257 Diamond Wheel Wet and Dry 105mm (4”) 14,500rpm
Continuous Rim(Turbo)
KW03-256 KW03-257
Continuous Rim(Wet)
Diamond Cutter
DIAMOND CUTTER
Diamond Cutter
DIAMOND CUTTER
File Set
FILE
Order No. Type Description
KW0300227 KW03-227 Needle File Set 140mm (6pcs)KW0300228 KW03-228 Key File Set 140mm (6pcs)KW0300229 KW03-229 Needle Rasp File Set 160mm (6pcs)
KW03-227
KW03-229
KW03-228
Contains :• 1 pc halfround smooth file 140mm• 1 pc flat hand smooth file 140mm• 1 pc triangle smooth file 140mm• 1 pc round smooth file 140mm• 1 pc square smooth file 140mm• 1 pc flat warding smooth file 100mm
Contains :• 1 pc halfround smooth file 140mm• 1 pc flat hand smooth file 140mm• 1 pc triangle smooth file 140mm• 1 pc round smooth file 140mm• 1 pc square smooth file 140mm• 1 pc flat warding smooth file 140mm
Contains :• 1 pc halfround rasp file 160mm• 1 pc flat hand rasp file 160mm• 1 pc triangle rasp file 160mm• 1 pc round rasp file 160mm• 1 pc square rasp file 160mm• 1 pc flat warding rasp file 160mm
Diamond Wheel
DIAMOND WHEEL AND CUTTERD
IAM
ON
D W
HEE
L A
ND
CU
TTER
• Brick• Marble
www.kawanlama.com 41ABRASIVE PRODUCT
Flat File
FILE
SET
Feature :• Round on one side and flat on the other. Both sides are double cut. The file tapers toward the point in both width and thickness
Benefit :• The half round side (front) makes this file ideal for getting into rounded holes, concave corners, crevices etc. It also can be used on flat surfaces
Order No. TypeSize Length
Descriptionmm Inch
KW0300184 KW03-184 100 4 Half Round Bastard File KW0300185 KW03-185 100 4 Half Round Smooth FileKW0300186 KW03-186 150 6 Half Round Bastard FileKW0300187 KW03-187 150 6 Half Round Smooth FileKW0300188 KW03-188 200 8 Half Round Bastard FileKW0300189 KW03-189 200 8 Half Round Smooth FileKW0300190 KW03-190 250 10 Half Round Bastard FileKW0300191 KW03-191 250 10 Half Round Smooth FileKW0300192 KW03-192 300 12 Half Round Bastard FileKW0300193 KW03-193 300 12 Half Round Smooth File
Feature :• Tapered in width and thickness Double cut on both sides and single cut on edges
Benefit :• Favored for use in factories, ma chine shops and garage
Order No. TypeSize Length
Descriptionmm Inch
KW0300174 KW03-174 100 4 Flat Bastard File KW0300175 KW03-175 100 4 Flat Smooth FileKW0300176 KW03-176 150 6 Flat Bastard FileKW0300177 KW03-177 150 6 Flat Smooth FileKW0300178 KW03-178 200 8 Flat Bastard FileKW0300179 KW03-179 200 8 Flat Smooth FileKW0300180 KW03-180 250 10 Flat Bastard FileKW0300181 KW03-181 250 10 Flat Smooth FileKW0300182 KW03-182 300 12 Flat Bastard FileKW0300183 KW03-183 300 12 Flat Smooth File
Order No. TypeSize Length
Descriptionmm Inch
KW0300194 KW03-194 100 4 Round Bastard File KW0300195 KW03-195 100 4 Round Smooth FileKW0300196 KW03-196 150 6 Round Bastard FileKW0300197 KW03-197 150 6 Round Smooth FileKW0300198 KW03-198 200 8 Round Bastard FileKW0300199 KW03-199 200 8 Round Smooth FileKW0300200 KW03-200 250 10 Round Bastard FileKW0300201 KW03-201 250 10 Round Smooth FileKW0300202 KW03-202 300 12 Round Bastard FileKW0300203 KW03-203 300 12 Round Smooth File
Feature :• Tapered in width and thickness. Double cut on both sides and single cut on edges
Benefit :• Favored for use in factories, machine shops and garage
Half Round File
Round File
Order No. Type Description
KW0300224 KW03-224 File Set 6~8” (7 pcs)
6-8”
Contains :• Plastic handles All size • 6” slim taper smooth single cut file• 6” half round smooth file• 8” half round rasp file • 6” round bastard file• 6” flat bastard double cut file• 8” mill bastard single cut file
7pcs
Contains :5 pcs 8” file with handle :• 1 pc flat second cut file• 1 pc round bastard file• 1 pc square second cut file• 1 pc half round second cut file• 1 pc three square second cut fileCase Dimension : 36 x 35 x 31cmWeight : 0,7kg
Order No. Type DescriptionKW0300230 KW03-230 File Set 8” (5pcs)KW0300226 KW03-226 File and Rasp Set (12 pcs)
Contains :• 2 pcs plastic handle All size• 1 pc 6” round smooth file• 1 pc 6” slim taper smooth file• 1 pc 6” three square second cut file• 1 pc 8” shoe rasp file• 1 pc 8” farmer second cut file• 1 pc 8” round bastard file• 1 pc 8” half round wood rasp• 1 pc 8” flat smooth file• 1 pc 8” half round second cut file• 1 pc 10” flat bastard file
5pcs 12pcs
FILE SET
1
ABRASIVE PRODUCT42
1
FILE
FILE
Feature :• The cross-section is square. It is double cut and tappers toward the point
Benefit :• For filing grooves, square hole inside corner and for finishing cutting tools. Larger sizes frequently preferred to correspond with flat files because heavier sections and four filling surfaces
Order No. TypeSize Length
Descriptionmm Inch
KW0300212 KW03-212 100 4 Square Bastard File
KW0300213 KW03-213 100 4 Square Smooth File
KW0300214 KW03-214 150 6 Square Bastard File
KW0300215 KW03-215 150 6 Square Smooth File
KW0300216 KW03-216 200 8 Square Bastard File
KW0300217 KW03-217 200 8 Square Smooth File
KW0300218 KW03-218 250 10 Square Bastard File
KW0300219 KW03-219 250 10 Square Smooth File
Order No. TypeSize Length
Descriptionmm Inch
KW0300220 KW03-220 100 4 Slim Taper Bastard File
KW0300221 KW03-221 125 5 Slim Taper Bastard File
KW0300222 KW03-222 150 6 Slim Taper Bastard File
KW0300223 KW03-223 200 8 Slim Taper Bastard File
Features :• Single cut• Edges set and cut for filing gullets between saw teeth• Triangular in shape and tapered toward the point
Square File
Slim Taper File
Adjustable File, Cylinder Hone
ADJUSTABLE FILE, CYLINDER HONE
Features :• File with holder• For curved tooth files without tang
Order No. Type Description
KW0300225 KW03-225 Adjustable Flexible File with Holder 14”
KW0300231 KW03-231 Flexible File 14”
14”
Order No. Type DescriptionKW0300027 KW03-27 Adjustable Brake Cylinder Hone 11/16 ~ 2 1/5
KW0300029 KW03-29 Replacement Stone for KW03-27KW0300028 KW03-28 Adjustable Brake Cylinder Hone 2 ~ 7”
KW0300030 KW03-30 Replacement Stone for KW03-28
Adjustable Cylinder Hone
Benefits :• Can be used with either 12” or 14” files• Easily adjusted for curving file outward or inward
KW03-27
KW03-29
Three Square File
Feature :• Triangular as the taper files but double cut with sharp corner slightly set and single cut edges. Angle are 60 and tapers toward the point.
Benefit :• For cleaning out corner, filling angles, taps and cutter. It is also used on flat surfaces.
Order No. TypeSize Length
Descriptionmm Inch
KW0300204 KW03-204 100 4 Three Square Bastard File
KW0300205 KW03-205 100 4 Three Square Smooth File
KW0300206 KW03-206 150 6 Three Square Bastard File
KW0300207 KW03-207 150 6 Three Square Smooth File
KW0300208 KW03-208 200 8 Three Square Bastard File
KW0300209 KW03-209 200 8 Three Square Smooth File
KW0300210 KW03-210 250 10 Three Square Bastard File
KW0300211 KW03-211 250 10 Three Square Smooth File
www.kawanlama.com 43ABRASIVE PRODUCT
WIR
E BR
USH
Features :• Aggressive, multiple row wheel brushes with brass coated steel wire, crimped (0,30mm)• For medium and heavy applications
Order No. Type DescriptionDimension
rpmDmm
Amm
Tmm
Arbor hole B maxmm
Rmm
KW0300040 KW03-40 Bench Grinder Brush 100 x 16mm 100 16 17 20 30 8,000KW0300041 KW03-41 Bench Grinder Brush 125 x 18mm 125 18 27 20 40 6,000KW0300042 KW03-42 Bench Grinder Brush 150 x 25mm 150 25 28 32 50.8 6,000KW0300043 KW03-43 Bench Grinder Brush 200 x 25mm 200 25 34 32 80 4,500KW0300044 KW03-44 Bench Grinder Brush 250 x 25mm 250 25 47 50.8 100 3,000
ø100ø150
Bench Grinder Brush
WIRE BRUSHø200
Order No. Type Description
KW0300285 KW03-285 Wire Brush Ø Set 9-19mm (20pcs)
WIRE BRUSHWire Brush Set
KW03-286
1/4” Hex. Shank
Order No. Type Description
KW0300286 KW03-286 Flexible Honing Brush 8mmKW0300287 KW03-287 Flexible Honing Brush 10mmKW0300288 KW03-288 Flexible Honing Brush 12mmKW0300289 KW03-289 Flexible Honing Brush 16mmKW0300290 KW03-290 Flexible Honing Brush 20mmKW0300291 KW03-291 Flexible Honing Brush 22mmKW0300292 KW03-292 Flexible Honing Brush 25mmKW0300293 KW03-293 Flexible Honing Brush 30mmKW0300294 KW03-294 Flexible Honing Brush 32mmKW0300295 KW03-295 Flexible Honing Brush 35mmKW0300296 KW03-296 Flexible Honing Brush 38mmKW0300297 KW03-297 Flexible Honing Brush 51mmKW0300298 KW03-298 Flexible Honing Brush 60mm
Flexible Honing Brush
Knotted Cup Brush
CUP BRUSH
Features :Knotted Cup Brush.Brushing tools with tempered steel wire, knotted (0.50mm), for high speed angle grinders. Aggresive tools for fast heavy duty cleaning and brushing of large surfaces. They remove carbon, paint, rust, scale, and other kinds of contamination. The removable bridle prevents the trim from flexing.
ø80
ø65ø75
ø100
Order No. Type DescriptionDimension Thread
Gmm
rpmDmm
Tmm
Knotsmm
KW0300049 KW03-49 Knotted Cup Brush 65mm x M10 x 1.5 65 19 18 M10 x 1.5 12,500KW0300050 KW03-50 Knotted Cup Brush 75mm x M10 x 1.5 75 22 18 M10 x 1.5 8,500KW0300051 KW03-51 Knotted Cup Brush 80mm x M14 x 2.0 80 24 22 M14 x 2.0 8,500KW0300052 KW03-52 Knotted Cup Brush 100mm x M14 x 2.0 100 24 22 M14 x 2.0 8,500
KW03-49 KW03-50 KW03-51 KW03-52
1
ABRASIVE PRODUCT44
1
Order No. Type DescriptionDimension
Shank øD
mmA
mmT
mmKW0300056 KW03-56 DIY Cup Brush 50mm 50 19 16 1/4”KW0300057 KW03-57 DIY Cup Brush 75mm 75 22 20 1/4”KW0300058 KW03-58 DIY End Brush 25mm 25 24 30 1/4”KW0300269 KW03-269 DIY End Brush 15mm 15 24 30 1/4”
Universal Hand Scratch Brushes, with plastic handle for general cleaning purposes
Order No. Type DescriptionDimensions
Dmm
Amm
T
KW0300059 KW03-59 Scratch Brush Steel Wire 3 Row 265 140 25KW0300060 KW03-60 Scratch Brush Steel Wire 4 Row 265 140 25KW0300061 KW03-61 Scratch Brush Steel Wire 5 Row 265 140 25KW0300062 KW03-62 Scratch Brush Steel Wire 6 Row 265 140 25KW0300063 KW03-63 Scratch Brush Brass Wire 2 Row 265 140 25KW0300064 KW03-64 Scratch Brush Brass Wire 3 Row 265 140 25KW0300065 KW03-65 Scratch Brush Brass Wire 4 Row 265 140 25KW0300066 KW03-66 Scratch Brush Stainless Steel Wire 2 Row 265 140 25KW0300067 KW03-67 Scratch Brush Stainless Steel Wire 3 Row 265 140 25KW0300068 KW03-68 Scratch Brush Stainless Steel Wire 4 Row 265 140 25
USE AS A HELPING TOOLS TO CLEAN MATERIAL BEFORE
FINISHING PROCESS
WIR
E BR
USH
Wheel BrushesSturdy tools for heavy cleaning jobs and brushing large surface with coarse wire. The small diameter makes them most suitable for use on hard to reach areas. Fill material brush coated steel wire, crimped.
Feature :Wheel BrushesSturdy tools for heavy cleaning jobs and brushing large surface with coarse wire. The small diameter makes them most suitable for use on hard to reach areas. Fill material brass coated steel wire, crimped.
Order No. Type DescriptionDimensions
ShankØD
mmA
mmT
mmKW0300053 KW03-53 DIY Wheel Brush 50mm 50 7 10 1/4”
KW0300054 KW03-54 DIY Wheel Brush 75mm 75 10 16 1/4”
KW0300055 KW03-55 DIY Wheel Brush 100mm 100 12 22 1/4”
ø75 ø100
KW03-55KW03-54
ø50
KW03-53
ø75 ø25ø50 ø15
KW03-269KW03-56 KW03-58KW03-57
Diy Cup Brush Diy End Brush
WIRE BRUSH
Order No. Type DescriptionDimensions
ThreadG rpmD
mmA
mmT
mm
KW0300069 KW03-69Taper Brush Brass Coat Steel
Wire 100 x 10 mm x M10100 10 20 M10 x 1.5 12,500
Feature :The ideal shape for brushing hard to reach areas. Multipurpose brushes for light and medium cleaning jobs. Brass coated steel wire, crimped (0,30mm).
Taper Brush
Diy Wheel Brush
Scratch Brushes
Features :Crimping Cup Brush ø75.Brushing tools for single handed angle grinders. For light or medium rust removal and deburring. Brass coated steel wire, crimped (0.30mm).
Features :Crimping Cup Brush ø80 and ø100.Sturdy tools for heavy cleaning jobs and for brushing large surfaces. Brass coated steel wire, crimped (0.30mm).
ø75
Order No. Type DescriptionDimension Thread
Gmm
rpmDmm
Tmm
KW0300045 KW03-45 Crimped Cup Brush 75mm x M10 x 1,50 75 20 M10 x 1.5 12,500KW0300046 KW03-46 Crimped Cup Brush 80mm x M10 x 1,50 80 22 M10 x 1.5 8,500KW0300047 KW03-47 Crimped Cup Brush 80mm x M14 x 2,00 80 25 M14 x 2.0 8,500KW0300048 KW03-48 Crimped Cup Brush 100mm x M14 x 2,00 100 25 M14 x 2.0 8,500
ø80ø100
KW03-48KW03-45 KW03-47
Crimped Cup Brush
CUP BRUSH
www.kawanlama.com 45ABRASIVE PRODUCT
Abrasive
6ARG
AWASA
19APAGAHA
CGC
PAGrain Size
8
60
4000
Coarse
Fine
60Grade
C
K
Z
Soft
Hard
KStructrure
0
7
15
Dense
Open
7Bond Type
V=VitrifiedB=ResinoidR=RubberS=ShellacOM=Oxychloride
VMfrs.Record
Vitrified53R75R81R
92Resinoid
5WX99
Rubber20W
75RShape
Type No.1
Type No. 87
1Wheel Size
(diameter)x(thickness)x
(hole)mm
255x25x25.40
Conventional Grinding Wheel (Explanation)
CONVENTIONAL GRINDING WHEEL
GRI
ND
ING
WH
EEL(Grinding Wheel)
A grinding wheel which is composed of three elements; grain, bond and pore, rotates at high speed to grind a workpiece efficiently, and create a fine finish with high dimensional accuracy. This machining method is called “grinding”. As the work progresses, grain wears, causes cleavage, and breaks down while generating new cutting edges. this is the self-sharpening of a cutting edge, and is the biggest feature that other grinding tools do not have. In general precision grinding, a new cutting edge is generated forcibly when the grain is worn. This is called “dressing”.
Five Elements of Grinding Wheell GRAIN
Has in important function as a cutting edge to cut the workpiece. This is most influential to the quality of grinding wheel. Therefore, the right wheel for the work material and grinding condition should be selected.
l GRAIN SIZE
A unit to indicate size of grain using a number (#). If the value is closer to “1”, the grain size becomes (coarse). This will affect the surface finish of a workpiece and grinding efficiency. The most suitable grain size for your grinding work should be selected.
l GRADE
This represents the degree of bond strength that grips the grain. Generally, it is also called “hardness”. It does not represent the hardness of grain and strength of the grinding wheel. It represents softness and hardness of grinding interaction using letters. A character closer to A means the strength is low (soft), and closer to Z means strength is high (hard). A grade should be selected according to the hardness of the work material and desired grinding efficiency.
l STRUCTURE
This implies volume ratio of grain that occupies a certain capacity of grinding wheel. The structure is represented by a number. If the space between grains is narrow, it is said the structure is open. Wheels in
which the structure is made large (more than 10) are called “Porous type wheels” and are used for avoiding grinding burn in work.
l BOND
This works to bond and hold grain. Bond type that is suitable for the use and application of the grinding wheel should be selected.
Vitrified bond (V):
This is a ceramic and glass type bond. High in water and chemical resistance and excellent in form maintaining ability, this is used for general precision grinding, super finishing and honing.
Resinoid bond (B):
This is phenol resin bond. Because of its high rigidity and resistance to high- speed rotation, it is used for free grinding. Taking advantage of large elastic characteristics, this is also used for precision finish grinding. Other resin bonds to be noted are epoxy resin bond (Y) which is for preventing burns in grinding, and polyvinyl acetal resin bond (P) which is highly elastic and is used for polishing.
Rubber bond (R):
This is a rubber (mainly artificial) bond. Fully utilizing its characteristics of large elasticity and thermal softening, it is used for regulating wheels of centerless grinders, and cutting wheels. (Diamond CBN Wheel)
1
ABRASIVE PRODUCT46
1
CONVENTIONAL GRINDING WHEELLife King Wheel
ABR
ASI
VE
CUTT
ING
TO
OL “Life King” was developed by matchingv a specific combination of a new
abrasive grain - “TA” with an exclusive bond “VLK1” and VLK2” for superior holding / bonding force.The sustainability of cutting efficiency and grinding performance are superior to single crystal grain of conventional grinding wheel.
Long Life :The dress interval is improved, and the wheel life is extended because the abrasive grains do not wear easily and an outstanding cutting edge is sustained longer.
High-efficiency grinding :High-efficiency grinding is achieved due to high abrasion resistant “TA” grain ( Each grain maintains a sharp cutting edge longer) therefore minimizing thermal damage.
Dressing performance :“TA” is the toughest of conventional aluminium oxide grain, but maintains favorable dressing performance similar to the conventional grinding wheel.
“TA” is toughest conventional aluminium oxide grain
0,95
1,00
1,101,2
1,1
1,0
0,9
0,8WA SH TA
Toug
hnes
s (In
dex)
FEATURES
APPLICATION OF “VLK1” and “VLK2”
VLK1 Long Life :Cylindrical, surface, crank, cam, gear, internal, centerless grinding
VLK2 Free Cutting :Cylindrical, surface, gear, internal, centerless, groove, creep feed grinding
VLK1
V35
CONVENTIONAL BOND
V36
VLK2
Low(Large)
Grinding ratio(Wheel wear)
High(Small)
Low
gri
ndin
g effi
cien
cy
Hig
h
GRINDING PERFORMANCE
Size 405x25x127
Spec.WA80L7V35SH80L7V35
TA80L7VLK1
Grinding Wheel :
Dressing Conditions :
Dresser 0,8LL DresserDress Lead 0.6mm/r.o.w
Depth of Cut Ø20μm/pass x 5 pass
Specifications
Machine Cylindrical GrinderGrinding Method Cylindrical Plunge Grinding WetWorkpiece Material SCM435 Ø50xT10 (Hardened Steel HRc48)Wheel Speed (m/s) 60m/sWorkpiece Speed (m/s) 0.15m/sGrinding Efficiency (Z’) 2mm3/mm•sStock Removal (mm3) Total Stock Removal 8x103Spark Out 10rev.Coolant SEC-700(x50)
Grinding Conditions :
70
65
60
55
50
45
40
30
35
0.75 1.00 1.25 1.50 1.75 2.00 2.25
TA-VLK1
SH-V35
WA-V35
Power Consumption(kW)
TA-VLK1 Power Consumption is 30% lower and the grinding ratio is 40% higher than SH-V35
GRINDING PERFORMANCE
STOCK REMOVAL TILL WORKPIECE HARDNESS DETERIORATES
The stock removal ofTA-VLK is 30% greater than SH-V35
0,85
1,00
1,35
1,2
1.5
1.0
0.8WA-V35 SH -V35 TA-VLK1
Stoc
k Re
mov
al (i
ndex
)
www.kawanlama.com 47ABRASIVE PRODUCT
Grinding Wheels YBS, and YBSL for Double Disc Grinder “EPOXS”
Features:Special resin is used as the bond materials for “EPOXS” grinding wheel, which generated a sharp edge, maintains its sharpness and prevent grinding burn.
Benefit:No grinding burn was resulted.
Piercing Hole Type Disc Grinding Wheel (for Double Disc Grinding)Features:These holes and grooves efficiently supply grinding fluid to enhance the cooling effect, as well as to discharge chips smoothly to suppress grinding burn, its also improves accuracy and quality. This dressing interval and service life of the wheel are tremendously extended.
Benefits:The pierced hole type disc grinding wheel produced no grinding burn and extended the service life even if the grinding wheel is slightly harder than conventional product.
Grinding Wheel For B20UC for Roll Grinding (For Cold Roll, Front Stage Work Roll, And Back-up Roll)
Features:The easy control of the grinding wheel surface, it not only produced good grinding surface properties, but also allows performing rough, from grinding to finish grinding with only one wheel.
Benefits:Grinding wheel B20UC for roll grinding shows excellent performance in rough grinding of cold rolled, front stage work rolls and high efficiency in grinding of back up rolls.
Super Wide Center less Grinding Wheel
Features:Center less grinding which enable high efficiency grinding is mostly used. Recently, in-feed centerless grinding is more used for better grinding efficiency.Benefits:Noritake’s super wide centerless grinding wheel is specially manufactured to be uniform in thickness direction, so that high efficiency at accuracy grinding can be achieved.
Sandwich Grinding Wheel for Grinding of Crankshaft With Shoulder
Features:This sandwich grinding wheel is composed of three layers different in abrasive and grain size
Benefits:This is also effective in improvement of surface roughness of pins. Compared to be conventional single body grinding wheel, considerable improvement in grinding performance and efficiency can be achieved.
2-layer Grinding Wheel for Angular Grinding
Features:The 2-layer grinding wheel for angular grinding is a vitrified grinding wheel for simultaneous grinding of shaft and face, which is called angular grinding and is effective for improvement of grinding efficiency.
Benefits:The layer for the face is designed to be a porous and coarse abrasive with soft hardness grade using sharp abrasive material.
CONVENTIONAL GRINDING WHEEL
ABR
ASI
VE
CUTT
ING
TO
OL
Small Precision Grinding Wheel
Features:With special bonding materials V36 and V55 (Aluminium Oxide Grain), and V81 (Silicone Carbide Grain), sharp cutting edge is generated so that excellent grinding performance can be maintained from start to end.
Benefits:Since dimensional accuracy of the wheel is enhanced, truing during mounting the wheel can be small, reducing loss wear and time due to trying.
1
ABRASIVE PRODUCT48
1
ABR
ASI
VE
CUTT
ING
TO
OL
STANDARD SHAPES FOR GRINDING WHEEL
Type No.1 Straight Type No.2 Cylinder
Type No.3 Tapered One Side Type No.4 Tapered Two Sides
Type No.5 Recessed One Side Type No.6 Straight Cup
Type No.7 Recessed Two Sides Type No.8 Safety
Description Dimensions (cm)
Straight Customer Size
Description Dimensions (cm)
Cylinder Customer Size
Description Dimensions (cm)
Tapered One Side Customer Size
Description Dimensions (cm)
Tappered Two Sides Customer Size
Description Dimensions (cm)
Recessed One Side Customer Size
Description Dimensions (cm)
Straight Cup Customer Size
Description Dimensions (cm)
Recessed Two Sides Customer Size
Description Dimensions (cm)
Safety Customer Size
EF
E
E
E≥ T2
E≥ T4
W≥E
www.kawanlama.com 49ABRASIVE PRODUCT
ABR
ASI
VE
CUTT
ING
TO
OL
STANDARD SHAPES FOR GRINDING WHEEL
Type No.9 Dovetailed One Side Type No.10 Dovetailed Two Sides
Type No.11 Flaring Cup Type No.12 Dish
Type No.13 Saucer Type No.27 Depressed Center
Description Dimensions (cm)
Dovetailed One Side Customer Size
Description Dimensions (cm)
Dovetailed Two Sides Customer Size
Description Dimensions (cm)
Flaring Cup Customer Size
Description Dimensions (cm)
Dish Customer Size
Description Dimensions (cm)
Saucer Customer Size
Description Dimensions (cm)
Depressed Center Customer Size
For more detail information about
Pneumatic ToolsPneumatic Tools17SectionSection
E
E
E
1
ABRASIVE PRODUCT50
1
CBN Grinding Wheel
CBN AND DIAMOND DRESSER GRINDING WHEEL A
BRA
SIV
E CU
TTIN
G T
OO
L
l Diamond CBN wheel This is a wheel using diamond which is the hardest among existing
substances, and has wear resistance, and CBN (cubic boron nitride) which is the second hardest next to diamond, as the grain.
l Diamond There are natural and artificial diamond. Recently, artificial diamond
is mostly used. It is synthesized into spherical or cube shape. It is sometimes metal coated and is combined with compatible bond for us. This is used as abrasive material for grinding, cutting and lapping of tough and brittle non-metal such as glass.
l CBN This substance does not exist in nature. Inferior to diamond in terms
of hardness, the thermal safety is superb. It demonstrates excellent grinding characteristics for tough and brittle steel work materials. Similarly with diamond, metal coated CBN or CBN with micro crystal body are available.
This is used in combination with a compatible bond. (Borazon is a registered name of GE Co.)
l Bond Metal bond (M): This is bond into which various metal powder are mixed. As if features gripping strength of grain and long service life, it is used for cutting
of concrete and stone material. Besides, this is used for grinding and honing of optical glass and ceramics.
Resinoid bond (B): This is a phenol thermal setting resin bond, it hold grain less powerfully,
but its low elastic coefficient is suitable for wet grinding from to heavy duty grinding.
Vitrified bond (V): This is ceramic and glass type bond. As this bond is next high in
gripping strength of grain to metal bond, excellent in form maintaining characteristic, and superb power in grinding power, this bond is used for precision grinding. Not only porous type, but also micro pore type and the type without pore also available.
Electroplated Bond (P) Grains are plated onto the base material by means of electroplating. It is
possible to manufacture wheels with complicated shape, and it grinds excellently. However, the grain layer is only single (multiple layer type for special application is also available). The life of the bond is shorter than other bonds.
The component element of a diamond CBN wheel is basically the same as a grinding wheel, but the area equivalent to structure of grinding wheel is the concentration.
Concentration is the amount of grain contained in the unit volume of diamond and CBN grain layer. When the concentration is 100, the grain layer per 1 cm³ contains 4.4 carat of diamond and CBN, and it is indicated as 4.4 ct/cm³.
Ordering Information In order to insure the accurate and prompt fulfilment of each other, please indicate the following. All of term are necessary to manufacture. 1. Quantity 2. Delivery 3. Wheel type (Shape) Such as 1A1, 6A2, 11V9 etc 4. Dimensional size as shown in catalogue, Diameter, Thickness, Arbor
Hole Size, Diamond Depth, etc. 5. Complete specification Abrasive Type, Grit size, Grade, Concentration, Bond Type 6. Wet or Dry Grinding, if you supply us comprehensive
information of your working conditions like the following, we could supply you more suitable wheels.
7. Working condition Wheel speed, Depth of cut, table speed, etc. 8. Application Name of parts, Materials, Depth of reductions 9. Accuracy in finished tolerance, Required surface roughness
www.kawanlama.com 51ABRASIVE PRODUCT
Vitrified CBN Wheel for Way Grinding
ABR
ASI
VE
CUTT
ING
TO
OL
Features:The upper surface of the machine tool beds have a large stock removal and cause distortion easily due to grinding overload and heat.Benefits:Excellent grinding performance and heat absorption performance.
High Precision Electroplated WheelFeatures:High performance gears for automobiles requires extremely high shape accuracy, and efficient cut for complicated shape.
Benefits:High precision electroplated wheel, and excellent in uniform abrasive projection, and highly accurate surface finish can be obtained constantly.
Diamond CBN Wheel for Profile Grinding
Features:Use for profile grinding of mainly metal dies, such as cemented carbide, high speed steel, and die steel has been newly developed.
Benefits:Prevent deterioration of grinding quality and maintaining of precise wheel shape for the highest priority,
DDG Diamond CBN Wheel Features:Double disc surface grinding uses diamond and CBN as abrasive grain. Available bond type such as resin, metal, and vitrified. To meet the requirements of various work pieces types such as steel, cast iron, non ferrous and non metal.
Benefits:High precision and high efficiency grinding.
CG Wheel
Benefits:Superior sharpness, and highest wear resistance.
Features:CG wheel is a high performance diamond wheel for curve generating of optical lenses.
Vitrified CBN Wheel for Cam Lobe Grinding
CBN AND DIAMOND DRESSER GRINDING WHEEL
Feature:For cam lobe grinding and concave shaped cams.
Benefit:• Improvement of grinding accuracy and stability.• Improvement of grinding efficiency.• Grinding cost is considerably reduced.
Vitrified CBN Wheel for Pin GrindingFeatures:For grinding of crank shafts and pin for automobile engines, develop of special vitrified CBN wheel for high precision and efficiency grinding.
Benefits:Improved grinding accuracy, its long wheel life can drastically reduced replacement frequency of the wheel.
Vitrified CBN KP Wheel for Gear Grinding
Features:Possible to use the vitrified CBN wheel with gear grinders for conventional wheel without modification.
Benefits:Excellent grinding performance for long time and excellent shape maintaining accuracy, high quality grinding, and improvement of productivity.
Vitrified CBN KP Wheel for Slot Grinding
Features:The biggest feature of the vitrified CBN-KP grinding wheel for slot grinding has the optimum width and uniformity.
Benefits:Excellent result in high accuracy and high precision of vane grooves for compressor rotors, and enabled lowering of grinding cost. Also improvements of grinding efficiency.
Vitrified CBN Mounted WheelFeatures:High grinding and dressing abilities in the general applications and high concentrated CBN wheel specially requires the durability.
Benefits:Excellent grinding ability, improves the finish surface roughness and other shape precision, and improved reduction effect of the processing cost.
1
ABRASIVE PRODUCT52
1
CBN AND DIAMOND DRESSER GRINDING WHEEL A
BRA
SIV
E CU
TTIN
G T
OO
L Diamond CBN Wheel for Roll Grinding
Features:For roll grinding, recently rolled rollers have been diversified high quality of rolls, composed of special resin customized for large rolls and rolls easily ground.
Benefit:Longer service life and effectively reduced grinding cost.
Centerless Diamond CBN Wheel
Features:Used for centerless grinding, high performance grinding can be performed with a fine abrasive grain.
Benefits:This wheel is excellent in dimensional and balance accuracy even though the size is large, high accuracy grinding can be efficiently performed.
Centerless Diamond Wheel for Thread Grinding
Features:Use for thread grinding of magnetic material (soft ferrite). Use to form the material in to the specified screw thread on the diamond layer. Each thread is sharped very accurately.
Benefit:Wheel can last for a long time.
Electroplated Wheel for Centering And EdgingFeatures:Electroplated wheel for centering and edging during the manufacturing process of optical lenses, watch glass and eyeglass lenses. Contributes a long service life. For work that requires extra accuracy.
Benefit:Improvement of production productivity
Pencil Edging WheelFeatures:The pencil edging wheel is a wheel for edge processing of window glass for automobiles, building and furniture.
Benefits:Uses a special high strength metal bond features long service life and excellent accuracy, it contribute to improvement of yield rate.
Diamond CBN Honing Stone
Features:The diamond CBN honing stone is used for precision honing of the inner diameter of a cylinder stone is particularly suitable for honing of cast iron, thermal refined material, high hardness steel, ceramics and other difficult to cut materials.
Benefits:High bonding strength to enable high efficiency work, labor can be saved as the shoe is the throw-away type.
www.kawanlama.com 53ABRASIVE PRODUCT
ABR
ASI
VE
CUTT
ING
TO
OL
STANDARD SHAPES FOR DIAMOND AND CBN WHEEL
STANDARD SHAPES FOR DIAMOND AND CBN WHEEL
DW
Dimensions (cm)
Customer Size
1A1 1A8 1A1R
E
x
1A1RSS 1A1 6A2
11V2 11A2
Dimensions (cm)
Customer Size
11V9 11Y9 11C9
DWW
K
X
T
HJ
E
H
DW
x
E T
9A3 1FF1 1F1
D
T
R
X
H
X
ℓ
L
H
Dx
T
DW
E
T
x
H
S
DX
K
UT
HJ
E
S
DWW
T
HJ
EU
X
X
US
K
Dimensions (cm)
Customer Size
Dimensions (cm)
Customer Size
Dimensions (cm)
Customer Size
Dimensions (cm)
Customer Size
Dimensions (cm)
Customer Size
Dimensions (cm)
Customer Size
Dimensions (cm)
Customer Size
Dimensions (cm)
Customer Size
Dimensions (cm)
Customer Size
Dimensions (cm)
Customer Size
1
ABRASIVE PRODUCT54
1
ABR
ASI
VE
CUTT
ING
TO
OL
STANDARD SHAPES FOR DIAMOND AND CBN WHEEL
STANDARD SHAPES FOR DIAMOND AND CBN WHEEL
9U1 1EE1
1FF6Y 1LL6Y
HH1 14A1
DW x
x
T
H
E
H
D
T
x
V
L1
L
X w
T
J
M
D
H
X
U TE
H
D
x
R U2
U1 T
12V9
6A2S 12A2 12V4
T
x
W
R
L
D
PK
HJ
X
E
U
T
H
K
DW
x
E
T
HHF HHH
H
D
x
r
U2
U1 T
J
H
K
D
wx V
T
S
w
E
Z
x
Z
Dimensions (cm)
Customer Size
Dimensions (cm)
Customer Size
Dimensions (cm)
Customer Size
Dimensions (cm)
Customer Size
Dimensions (cm)
Customer Size
Dimensions (cm)
Customer Size
Dimensions (cm)
Customer Size
Dimensions (cm)
Customer Size
Dimensions (cm)
Customer Size
Dimensions (cm)
Customer Size
www.kawanlama.com 55ABRASIVE PRODUCT
ABR
ASI
VE
CUTT
ING
TO
OLSingle Point Dresser
DIAMOND DRESSER
Features:This is a type of dresser on to the shank which a natural diamond stone is set directly. This is the simplest dresser among diamond tools. Each type is simple, but slightly different.
Benefits:By understanding its orientation and using conditions correctly, tool cost can be reduced, and working efficiency and quality of the workpiece can be improved.
ØH
D
L
l 1
ØD
Standard Dimensions
D 6 8 8 8 10 10 10 11 11 11 12 12
L 30 30 50 100 35 50 100 35 50 100 50 100
1. Straight shank
3. Landis
ØH
D
L
l 1
ØD
D HD L litter13 4 20 126 12 27 126 12 35 20
6.35 9.5 25 116.35 9.5 28.5 12.76.35 12.7 32 12.7
8 12 26 168 12 35 20
9.5 14 25 1611 16 35 2011 16 40 25
ØD
Ll 1
90o
5. V-grooved straight shank
D L litter1
6 8 4
10 16 7
10 20 9
11 35 16
11 40 20
BL
ØD
l 1
l 2
D L B litter1 litter2 Taper6.3 26.0 5 22.0 4 1/508.7 33.0 7 24.0 6 1/509.0 27.0 7 21.0 5 MT#09.0 31.0 7 25.5 5 MT#0
12.0 36.0 10 27.0 6 MT#112.0 49.0 10 40.0 8 MT#1
2. Taper shank
BL
ØD
l 1
l 3l 2
ØH
D
4. Taper shank with head
D HD L litter1 litter2 litter3 Taper B5.8 9 31 21.0 9.5 7 1/40 87.1 10 31 21.0 9.5 7 1/40 89.0 12 31 21.5 9.5 7 MT#0 109.0 16 42 25.5 14.0 9 MT#0 13
12.0 18 18 40.0 14.0 9 MT#1 14
ØD
LQ
K
6. Threaded shank
D L K QM8 x 1 16 1.0 2
M8 x 1.25 40 1.5 2M12 x 18 40 1.5 2
1
ABRASIVE PRODUCT56
1
ABR
ASI
VE
CUTT
ING
TO
OL Point Dresser (Cone And Square Shape)
DIAMOND DRESSER
Features:A conical shaped diamond dresser is called a cone point dresser, and a piramid dresser is called a “square point dresser”, both of which have a fixed nose angle. Its extremely difficult to grind corners of natural diamond to a certain shape.The condition of the dressing surface is largely effected by the shape of dresser nose.
Benefits:Since the cone point dresser has the nose point at the center of the shank, the contact point doesn’t change even if the dresser is changed. This helps improved dressing accuracy. On the other hand, the square point utilizes a ridge line well, so grinding performance of a grinding wheel can be improved.
Standard Dimensions
1. Straight shank (C3A)
L
ØDV
R
ØH
D
V
R
L
l1
ØD
2. Landis (C3G)
D L V R
6.3 25.4 30 0.1
9.5 35.0 60 0.1
11.0 40.0 80 0.1
D HD L litter1 V R
4.7 8 16 8 90 0.2
3. Maag (C3B)
L
ØDV
R
Q
K 1.2
R
V
A
11.7
1.7 1.3
Ø7.
9
Ø11
D L V R K Q
6 19.5 90 0.2 1.0 1.5
7 11.5 90 0.2 1.0 1.5
7 19.5 90 0.2 1.0 1.5
8 30.0 60 0.1 1.2 2.5
V 35 35 35 35 35 46 46
R 0.045 0.065 0.090 0.125 0.130 0.050 0.125
A 2.0 2.0 2.5-3.0 2.5-3.0 2.5-3.0 2.0 2.5-3.0
3. Matrix (CBC)
www.kawanlama.com 57ABRASIVE PRODUCT
Forming Dresser
DIAMOND DRESSER
Features:Corners, and both sides and edges are polished to enable dressing from all parts of the forming dresser. Width of the roof, which is 1.5-2.0mm as standard can be changed according to the request. Diamond used for this dresser is selected based on a severer standard compared to an ordinary dresser.
Benefits:The forming dresser is used for dressing of angular grinding wheels, diamond form grinding wheels, stepped cylindrical grinding wheels, and other form grinding wheels.
Multi Stone Dresser Features:More than two small diamond pieces of uniform size are set. This arrangement is based on the wheel diameter and width. Usually three to five diamond stones are arranged.
Benefits:This type of dresser substitute for dressers with a large grain since it has advantages of long life, low breakage ratio, and fast dressing as the resistance applied to each piece of diamond stones is small. This brings about reduction in dressing cost.Even if the first row wears out, the second and third rows come out, requiring no repairing.
ABR
ASI
VE
CUTT
ING
TO
OL
Standard dimensions
D L
6.006.359.53
10.0011.1112.0012.70
45454545
100100100100
D HD L Litter6.006.359.53
10.0011.0011.1112.0012.70
1212161618182020
4545454545454545
30-3330-3330-3330-3330-3330-3330-3330-33
1
ABRASIVE PRODUCT58
1
ABR
ASI
VE
CUTT
ING
TO
OL
Impregnated Dresser
Features:This dresser is slightly different from the grit dresser used for correction of general grinding wheels as it uses comparatively small diamond grains. Mainly used for truing of CBN wheels.
Benefits:The impregnated dresser is used for correction of wheel for cylindrical grinding, surface grinding and internal grinding, which need linear correction. This dresser can also be used for correction of precision grinding wheels.
LL Dresser (Blade Dresser)
Features:• Longer life of tool: diamond columns are rigidly supported on the blade
which can be completely consumed.• Consistent dressing: performance is consistently found from tool to tool
due to controlled quality and precise size of synthetic diamond rods).• Easy to use: LL Dresser can be completely consumed without any
adjustment, turning or re-lapping. Flexibility of designed for a wide range of application from small I.D. Grinding to large centerless grinding (1 to 5 rods).
• The LL Dresser has two different diamond rod configurations. One is for natural dresser life (S) and second design is for maximum dresser life (T).
Benefits:The LL Dresser utilizes precision square cut synthetic diamond “Rods”. Dues to single diamond “Rod” design; size, shape and spacing is kept precisely consistent through out the entire life of the dresser.
Blade Dresser
Features:This is a dresser (multi stone dresser blade type) in which a natural needle shaped long stone is arranged. It can be used for dressing of a form grinding wheel for angular grinding.
Benefits:As new point edges come out for the multi row type, no repairs are necessary. By changing grain size, bonding strength and stone arrangement, almost all kinds of grinding wheels can be dressed with this dresser. Since the dresser is highly durable compared to a single point and forming dresser, the dressing cost can be lowered.
DIAMOND DRESSER
Ød
ØD
Ll
Standard dimensions
d Q D L
3 3 8 50
3 5 10 50
3 8 11 50
4 5 8 50
4 8 10 50
4 10 11 50
5 5 8 50
5 8 10 50
5 10 11 50
www.kawanlama.com 59ABRASIVE PRODUCT
ABRA
SIVE
CU
TTIN
G TO
OLGrit Dresser Features:
This is a dresser brought to life by Noritake’s excellent development technology and unique manufacturing method. Diamond grains are arranged in a regular manner
Benefits:Since diamond grains are arranged in a regular manner, resistance during dressing is distributed uniformly, achieving reduction of wear of the dresser, as well as stable dressing. It’s high durability makes the dresser cost efficient as the consequence. Since many diamond grains work at the same time. Speed should be two to four times faster than single point dresser.
DIAMOND DRESSER
Standard dimensions
Size of Diamond
Shape of Diamond
Grain Size of Diamond Shank Shape
123
ABR
468
A FB GC HD JE L
Indication Method
Size of Diamond Grain Size Grain Size of Wheel to be Corrected
4 Coarse Coarser than # 46
6 Medium # 54-100
8 Fine Finner than #120
Grain Size of Diamond
A Type B Type C Type
Size of Diamond W L X W L X d X
1 4 10 7 6 12 9 3 3
2 6 12 7 6 19 9 6 6
3 6 19 7 9 9
1
ABRASIVE PRODUCT60
1Features Depressed Center Grinding Wheel Metal :Rough grinding wheels for grinding different types of steel materials (including stainless steels and cast materials)
Order No. Type Description
TJ0000028 638382 Grinding Wheel 4” 100x6x16mm A30-BF
TJ0000006 222860 Grinding Wheel 5” 125x6x22,23 A30-BF
TJ0000007 222861 Grinding Wheel 6” 150x6x22.23 A30-BF
TJ0000002 222863 Grinding Wheel 178X6X22.2 A30-BF
TJ0000018 222865 Grinding Wheel 9” 230x6x22.23 A30-BF
TJ0000015 546900 Grinding Wheel 7” 178x6x22.23 A30-BFT
TJ0000029 641053 Grinding Wheel 6” 150x6x22.23 A30-BF
GRI
ND
ING
, CU
TTIN
G W
HEE
L,
AN
D F
LAP
DIS
C
Features Superthin Cutting Wheel :For cutting thin-walled metal sheets, profiles, tubes, and beams made of stainless and acid resistant steel for the construction of machines, contain-ers, vehicles and ships.
Order No. Type Description
TJ0000019 222893 Superthin Cutting Wheel 4” 100x1x16 A60-BF
Features Cut-off Wheels :Cut-off wheels for cutting all types of steel materials (including stainless steel and cast materials)
Order No. Type Description
TJ0000004 222996 Cut-off Wheels 4” 100x2,5x16 A30-BF
TJ0000021 222998 Cutting Wheel 5” 125x2.5x22.23 A30-BF
TJ0000017 222999 Cutting Wheel 6” 150x2.5x22.23 A30-BF
TJ0000010 223000 Cut Off Wheel 7” 178x3x22.23 A30-BF
TJ0000026 223002 Cut Off Wheel 9”(230x3x22.32) A30-BF
Features Cut-off Wheels :Universal cut-off wheels for steel (2 fibers reinforcement)
Order No. Type Description
TJ0000005 223033 Cut Off Wheels 14” 350x2.8x25.4 A46-BF
TJ0000008 485530 Cut Off Wheels 16” 400x3x25.4mm A46-BF
Features Cutting Wheel :Universal cut-off wheels for steel (1 fibers reinforcement)
Order No. Type Description
TJ0000013 546692 Cutting Wheel 14” 350x2.8x25.4mm A36-BF
TJ0000014 546696 Cutting Wheel 16” 400x3.0x25.4mm A36-BF
Features Semi Flexible Grinding Wheel : Aggressive and easy grinding for machining all steel, stainless steel, and non-ferrous materials (aluminium, copper, bronze, etc)
Order No. Type Description
TJ0000003 236317 Semi Flexible Grinding Wheel 4” 100X16 WA46-BF
TJ0000024 236319 Semi Flexible Grinding Wheel 5” 125X22.23 WA46-BF
TJ0000025 236320 Semi Flexible Grinding Wheel 7” 178X22.23 WA46-BF
TJ0000020 546907 Semi Flexible Grinding Wheel 4” 100X16 WA60-BF
TJ0000016 546910 Semi Flexible Grinding Wheel 4” 100X16 AC60-BF
Features for Flap Disc : Versatile tool for universal applications, suitable for angle grinders of any power
Order No. Type Description
TJ0000022 474874 Flap Disc 4” 27A (100X16) ZA60-B
TJ0000027 474875 Flap Disc 4” 27A (100X16) ZA80-B
TJ0000023 474877 Flap Disc 4” 27A (100X16) ZA120-B
GRINDING, CUTTING WHEEL, AND FLAP DISC