01-10-attag-01
5
ALC E T L Alcatel OmniPCX 4400 SUBSECTION 10 attag Ed.01a
-
Upload
samuel-mares-palafox -
Category
Documents
-
view
17 -
download
0
Transcript of 01-10-attag-01
A L C ET L
Alcatel OmniPCX 4400
SUBSECTION 10
attag
Ed.01a
A L C ET L
Alcatel OmniPCX 4400
Subsection 10 - attag
Subsection 10 - attag
SUMMARY
attagUse................................................................................................................. 10. 3
1. Operator command "attag" ................................................................. 10. 3
Ed.01a Ref.3BA19919ENAA 10.1
A L C ET L
Alcatel OmniPCX 4400
Subsection 10 - attag
10.2 Ref.3BA19919ENAA Ed.01a
A L C ET L
Alcatel OmniPCX 4400
Subsection 10 - attag attagUse
44A01E05316A130AAEN
attagUseEdition: 01a
1. Operator command "attag"
The"attag" command followed by the"Processing Group Directory Number" is used to obtain thelist of agents attached to this processing group.
(0)a4400a> attag 35703+---------------------------------------------------------------------+| Name : GT03 | Lognum : 3 |+---------------------------------------------------------------------+| Number : 1 | Max : 1000 |+---------------------------------------------------------------------+| Order number | Lognum | Agent dir nb | Eqt number |+---------------------------------------------------------------------+| 0 | 103 | 36003 | 305 |+---------------------------------------------------------------------+
The information provided is as follows:
- the processing group name,
- the logical number of the processing group,
- number of agents attached to this processing group,
- maximum number of agents that can be attached to this processing group,
- for each agent attached, the following table is displayed:
� order number of the agent,
� logical number of the agent,
� directory number of the agent,
� equipment number of the agent.
The"attag" command followed by the "Processing Group Directory Number" and option"_s pa-rameter" is used to display the list of agents attached to this processing group from the order numberentered as parameter.
The"attag" command followed by the"Processing Group Directory Number" and option"_n pa-rameter" is used to display only the first "n" agents attached to this processing group (n = parametervalue).
Options"_s" and"_n" can be combined.
Ed.01a Ref.3BA19919ENAA 10.3
