0074 AIRMET CATALOGUE V13 SCREEN - Ferret.com.au · MX6 iBrid Multi-gas Monitor DATALOGGING SERVICE...

AIRMET SCIENTIFICOccupational Health, Safety & Environmental Monitoring Equipment SpecialistsSALES | SERVICE | RENTAL2010 EDITION

Sales 1800 000 744

Rental 1300 137 067

www.airmet.com.au

Real-Time Dust & Aerosol Monitoring

Gas Detection & Monitoring

Surface & Dermal Sampling

Noise, Sound & Vibration Monitoring

Water & Soil

Air Sampling

Indoor Environmental Monitoring

Heat Stress Monitors

27

02

23

33

37

15

25

36

29Radiation Measurement

CONTENTS

Icons appear in this catalogue to provide a quick reference to assist you in instrument selection.

Product Icons

Quality ISO 9001

The rental icon indicates the equipment that is available for short term rental.

RENTAL

The datalogging icon is displayed to indicate instruments that datalog.

DATALOGGING

The service icon indicates instruments that Air-Met Scientifi c provides repair, calibration and maintenance.

SERVICE

The consumables icon is displayed where consumables are available to compliment your instrument purchase.

CONSUMABLES

The docking icon is displayed where the instrument is docking station compatible.

DOCKING

The kit icon is displayed where the equipment may be packaged as a kit.

KIT

The gas icon is displayed where gas is available to compliment your instrument purchase.

GAS

The sales icon indicates equipment available for purchase.

SALES

$

Victoria/Tasmania

7–11 Ceylon StreetNunawading VIC 3131

Sales: 1800 000 744Sales Fax: 1800 000 774

Rental: 1300 137 067Rental Fax: 03 9877 1230

South Queensland

51 Ross Street (Via Durong St)Newstead QLD 4006

Sales: 1800 000 744Sales Fax: 1800 000 774


New South Wales

Suite 8, 17–23 Myrtle StreetNorth Sydney NSW 2060

Sales: 1800 000 744Sales Fax: 1800 000 774

Rental: 1300 137 067

Rental Fax: 02 8904 1825

North Queensland

172 Shakespeare StreetMackay QLD 4740

Sales: 1800 000 744Sales Fax: 1800 000 774


South Australia/ Northern Territory

474 Port RoadHindmarsh SA 5007

Sales: 1800 000 744Sales Fax: 1800 000 774


Western Australia

Unit 8, 231 Balcatta RoadBalcatta WA 6021

Sales: 1800 000 744Sales Fax: 1800 000 774


Air-Met Scientifi c Offi ce Locations

Contents

www.airmet.com.au Sales 1800 000 744 Rental 1300 137 067

02

Gas Detection

& Monitoring

03

RENTAL DATALOGGING SERVICE DOCKING KIT GAS SALES

> Choice of ‘smart’ interchangeable sensors;

CO, H2S, O2, NO2, SO2, NH3, C2, CLO2, PH3,

HCN, H2.

> Tough, compact and durable.

> Lifetime warranty.

> Easily and quickly adaptable

to monitor diff erent gases.

> PEAK, STEL and TWA readings and alarms.

> 1 year datalogging storage.

> Resistant to both water and radio

frequency interference.

> Australian ANZEx Intrinsic Safety approval.

> For protection from unsafe levels

of CO, H2S, O2, NO2 or SO2.

> Compact, durable, highly adaptable

and 2 year maintenance-free.

> Resistant to both water and radio

frequency interference.

> Simple 2-button operation system

and user adjustable alarm and

calibration set-points.


> Compact, economical and with

a 2 year warranty.

> Visual, audible and vibrating alarms.

> Docking station ready.

> Up to Four Gas Sensors.

> Sensors available LEL, O2, CO, H2S,

NO2 & SO2.

> Large LCD.

> iNet™ compatibility.

> IECEx Intrinsic Safety Approval.

> Compact, economical and easy to

use. 2 year all-inclusive warranty.

> Monitors and displays CO, H2S, O2

and combustible gas levels.

> Visual, audible and vibrating alarms.

> 18 hours run-time and 75 hours

datalogging.

> Optional SP40 motorised sampling

pump for remote sampling.


MULTI-GAS MONITORS

SINGLE-GAS MONITORS

GAS DETECTION & MONITORING

Hand-held, personal and fi xed instrumentation to detect and monitor for toxic gas, explosive gas and oxygen defi cient conditions. For use in industrial, commercial and residential situations.

The MX6, the fi rst multi-gas monitor

equipped with a colour LCD screen,

can be confi gured to monitor from 1–6

gases, choosing from 25 smart sensor

options. Sensor options include a full

range of electrochemical cells for toxic

gases and oxygen, as well as a photo-

ionisation sensor, and infrared sensors

for CO, CH4 to 100% of volume and

combustible gases to 100% of LEL –

making this the most versatile gas

monitor available. Additional features

of the MX6 include the graphic, menu-

driven operating system; real-time

graphic display mode; datalogging with

a minimum of 1 year storage capacity;

lithium-ion rechargeable or alkaline

battery operation; eight user-selectable

operating languages; automatic bump

test mode; audible, visual, and vibrating

alarms; alarm event log, graphic

display of calibration trends; durable,

rubber over-moulded construction;

DS2 Docking Station™ and iNet™

compatibility.

Monitors up to 6 gases continuously

and simultaneously

Full colour real-time graphic display

Choose from 25 ‘smart’ sensors including

PID and NDIR

Simple menu driven navigation

Audible, visual and vibrating alarms

Up to 36 hours run-time and 1 year

datalogging capacity

IECEx Intrinsic Safety Approval

Unprecedented

Capabilities & Versatility

GasBadge Plus

Personal Single-Gas Monitor

GasBadge Pro

DS-2 Dockable Personal Single-Gas Monitor

MX4

M40

Personal Confi ned Space Monitor

MX6 iBrid Multi-gas Monitor

DATALOGGING SERVICE DOCKING KIT GAS SALES

$

RENTAL DATALOGGING SERVICE DOCKING GAS SALES

$

SERVICE GAS SALES

$

DATALOGGING SERVICE DOCKING GAS SALES

$


04

Gas Detection

& Monitoring

05> Rugged, reliable, fl exible and intuitive.

Stainless steel case. Lifetime warranty.

Single-button operation.

> Continuously and simultaneously

monitors up to 6 gases using ‘smart’

interchangeable sensors.

> 24 hours run-time and 300 hours

datalogging.

> Highly conspicuous audible and visual

alarms.

> Australian AUSEx Intrinsic Safety approval.

> iNet™ compatibility.

> Automated bump-testing, calibration,

record keeping, battery charging and

instrument diagnostics.

> Ethernet and/or wireless connectivity –

link to up to 100 remote stand-alone

instrument docking stations.

> Graphical DSSAC user interface enables

administrator to track instruments, print

reports, set events and change parameters

in any location.

> Automated bump-testing and calibration

of GasBadge Plus instruments.

> Stand-alone operation – no PC required.

> LCD/LED indication of procedure

‘pass/fail’ status.

> Non-volatile internal memory stores

up to 200 status reports.

> Optional built-in serial data printer

for hard copy record of calibration

and bump-test.

The GDS-100 is a simple solution to connect

high pressure (large volume) calibration gas

cylinders to docking or bump test stations,

comprising of high pressure regulators,

interconnecting pipelines, outlet panels and

demand fl ow regulators.

Using high pressure cylinders, available in

750, 1,500, 3,000 or 7,500L capacities, the

GDS-100 has the ability to calibrate/bump

test multiple gas detectors at once, saving you

time and money. The larger the capacity of the

high pressure cylinder, the more inexpensive

the cost/litre of all calibration gases.

> Automated bump-testing, calibration

and charging of M40 instruments.

> Stand-alone operation – no PC required.

> Available in single and six-unit versions.

> Optional serial data printer for hard copy

record of calibration and bump-test.

INSTRUMENT MANAGEMENT SYSTEMS/DOCKING STATIONSMULTI-GAS MONITORS

GAS DETECTION ACCESSORIES

DS2 Docking Station

For iTX, MX6, MX4, GasBadge Pro & GasBadge Plus

iTX

DS-2 Dockable Personal Multi-Gas Monitor

M-Cal

M40 Calibration Station

CalPlus

Calibration Station for GasBadge Plus

GDS-100

DATALOGGING SERVICE GAS SALES

$

SERVICE GAS SALES

$


$RENTAL DATALOGGING SERVICE DOCKING GAS SALES

$

> Powered from the iTX Monitor.

> Remote sampling up to 30m

(fi tted with 3m of tubing

as standard).

> Can be used with a variety of probes.

> Audible warnings for low fl ow and

low battery ensure a valid sample.

> Australian AUSEx Intrinsic Safety

approval.

A complete range of calibration

gas and regulators are available in

a variety of cylinder sizes. Ask us

about calculating your gas usage

to assist with cylinder selection.

> Everything required for confi ned

space evaluation and monitoring

in a rugged carrying case.

> Includes monitor, charger, pump,

tubing, fi lters, gas and calibration

accessories.

iNet™ is a software-based service

that manages your fl eet of gas

detectors. iNet™ has predictive

software that alerts you to

maintenance issues before they

arise, ensuring your gas detectors

are in top working condition.

It lets you track workplace safety,

and spots potential problems

so you can take corrective action.

All instruments with data-

logging capabilities have

computer interface cables

and software for

instrument confi guration

and downloading data.

A convenient way to

manage the recharge

of your instrument fl eet.

iSP Motorised Sampling Pump –

for iTX Multi-Gas Monitor

Gas

Confi ned Space Kits

iNet™ Instruments

Management System

Computer Interface Equipment

5 & 6 Way Multichargers


06

Gas Detection

& Monitoring

Gas Detection

& Monitoring

iNet™ is a 48-month subscription

that provides the end user with gas

detectors, instrument docking stations,

computer hardware and calibration

gas. Above all it’s an internet based

proactive management system, that

uses accumulated worldwide computer

data to provide predictive maintenance

requirements for the equipment. With

iNet™ the end user does not own the

equipment, and why would you? iNet™

is an operating expense that locks in

your pricing with no hidden costs,

no capital outlay and no ongoing

depreciation requirements. Your gas

detection budget will be simple and

predictable. iNet™ is fl exible, should

your needs change, you can always

update the agreement by adding gas

detectors to your fl eet.

The online iNet™ Dashboard control

panel shown above gives customers

a 360-degree view of their gas

detection program, the only hosted

software in the world of its kind.

All iNet™ customers receive unlimited

user licenses to the iNet™ Dashboard

control panel as part of their

iNet™ subscription.

If iNet™ detects a malfunction,

we schedule a ready-to-use

replacement gas detector for priority

delivery. The end-user simply returns

the existing monitor in the prepaid

shipping package provided.

The future of

gas detection

management

is here.


08

Gas Detection

& Monitoring

09RENTAL SERVICE CONSUMABLES SALES

$

> Measures 100’s of diff erent gases

and vapours quickly and easily.

> Completely portable and

lightweight, no power required.

> Precision hand-operated piston

pump delivers accurate sample

volume to detector tube.

> Concentration displayed by colour

change in detector tube.

> Tests CO, CO2, Oil Mist and Water

Vapour in CABA & SCUBA cylinders

and airlines.

> Completely portable, no power

required.

> Results available immediately.

> Complete range of tests takes just

over 30 minutes.

SPOT-TEST GAS DETECTOR TUBES

Summary of gas detectors and sensors available

Kitagawa Precision

Gas Detector Tube System

P41R

Compressed Breathing Air Test System

Gas Detection

Shutdown Solutions

Air-Met Scientifi c specialise in providing

instrument management solutions. As shutdown

specialists we have extensive experience with

primary and subcontractors in mining, industrial

and petrochemical industries.

Air-Met Scientifi c will design and provide you

with a system tailored to project requirements.

We don’t just supply gas detectors, our systems

include everything needed for a successful shut

down including laptop computers, ethernet

hubs, cat 5 cable, gas, docking stations,

pumps, probes, software, tubes and fi lters.

We even provide regular on-site visits to ensure

everything runs smoothly.

PID O2 LEL H2S CO SO2 NH3 NO NO2 HCN CI2 PH3

Instrument Run-time

PumpRun-time

MX6 • • • • • • • • • • • • 24hrs 15hrs

ITX – • • • • • • • • • • – 24hrs 15hrs

Gas Badge – • – • • • • – • • • • 10hrs N/A

M40 – • • • • – – – – – – – 18hrs 12hrs

Gas not listed? Speak to us about fi nding you a solution.


$CONSUMABLES

RENTAL DATALOGGING SERVICE CONSUMABLES GAS SALES

The world’s most advance PID now even better.

Independently verifi ed as the best PID performing technology.

The PhoCheck Tiger hand held VOC detector with revolutionary PID technology provides the best available detection and software features, all ready to use straight out of the box!

Features

> Patented Fence Electrode Technology.

> Dynamic range ppb to 20,000ppm for

specifi c volatiles.

> Fast 2 second response.

> Easy change miniPID Detector, Electrode

Stack and Lamps.

> Exceptionally easy to use and intuitive.

> No complex set up procedures required

via a PC.

> Batteries certifi ed to be changed within

hazardous areas.

> Fully upgradeable with selectable functions.

> Choice of data logging options.

> Battery life up to 30 hours.

> Intrinsically Safe.

> Rugged design with protective, removable

rubber boot.

> Loud audible sounders 95dBA.

> Bright LED and vibration alarms.

> Wireless options.

> Lowest running costs on the market.

> 5 year instrument warranty.

PhoCheck Tiger with miniPID technology is the most advanced handheld

photoionisation detector (PID) on the market for volatile organic compounds

(VOCs). Choose from our full featured base unit, or upgrade your instrument

with a number of optional functions.

Options Include

> Datalogging.

> Health and Safety Mode.

> ppb Capability.

> Bluetooth and Wireless Communication.

Technical Specifi cations

> Minimum resolution: 1ppb or 0.001mg/m3.

> Maximum reading: 20,000ppm

or 20,000mg/m3.

> Accuracy: ± 5% display reading ± one digit.

> Battery life:

Li-ion life up to 30 hours, charge time 6.5 hours.

Alkaline: 3xAA, typically 15 hours life

Lamps: 10.6eV Krypton PID lamp (standard)

9.8eV and 11.7eV lamps available.

> Datalogging: 120,000 data log points

including date and time stamp

(33 hours at 1 log per second).

> Alarm:

Flashing LED and 95dBA at 300mm

audible sounder.

Selectable vibrating alarm

Pre-programmed TWA and STEL

Pre-programmed with 450 gases.

> Flow Rate:

220ml/min with fl ow fail alarm.

> Protection:

Designed to IP65 (heavy rain)

CE 1180 EMC tested to EN61326-1:2006,

EN50270:2006 & CFR 47:2008 Class A.

> PhoCheck Tiger.

> Rechargeable battery (Li-ion).

> Battery charger and mains adaptor.

> Rubber boot.

> Explorer case.

> USB memory stick.

> Zero fi lter assembly.

> PTFE Disc (dust fi lter).

> miniPID stack removal tool.

> Probe tube (60mm).

> Sample cleaning compound assembly.

> Cleaning buds.

> Lanyard (wrist strap).

> USB cable.

> Instrument manual.

Ion Science PhoCheck Kit

SERVICE CONSUMABLES SALES

$


10

Gas Detection

& Monitoring

11 At almost half the size of other landfi ll gas

analysers on the market, and weighing only

750g, the GFM 410 is an ideal portable

instrument for monitoring and analysing gas

content of landfi ll, biogas and contaminated

land sites. It measures methane (0–100%)

and carbon dioxide (0–100%) using

infrared sensors as well as oxygen (0–25%)

and hydrogen sulphide (0–1500ppm) using

electrochemical sensors.

GFM 410

RENTAL GAS SALES

Audible and visual alarm

Unique 70 hour, low pressure hydrogen fuel cylinder

Long-life 15 hour battery

Meets and exceeds USEPA Method 21 (LDAR) requirements

Intrinsic Safety; Class 1, Division 1, Groups A, B, C & D

Response time: <3 seconds

Accuracy: +/- 2%

The GFM 430 Plus is a truly universal

landfi ll gas analyser. It features all the

features of the GFM 410 plus it measures

gas concentrations, pressures, fl ows and

temperatures. It can be used to equally

great eff ect at peripheral boreholes and

gas extraction wells.

Designed to monitor landfi ll gas extraction

systems where H2S and CO monitoring may

be required, the GEM 2000 Plus analyses

landfi ll gas composition, calculates fl ow and

much more with speed and accuracy. It is

also intrinsically safe.

> Measures COppm and H2Sppm.

> Measures CH4 and CO2 in % volume.

> Measures static and diff erential pressure.

> Provides space for user defi ned comments.

> Certifi ed intrinsically safe for landfi ll use.

> 10–14 hours operation from one charge.

> Records site and well conditions.

> Wide linear response to almost

all VOC’s including methane.

> Virtually immune to interference

from water vapour etc.

> Completely self-contained with in-built

refi llable hydrogen fuel cylinder.

> 12 hours operation on a full charge

of hydrogen.

> Datalogging, audible alarm,

0–1 volt analogue output.

> Unique 70 hour, low pressure hydrogen

fuel cylinder.

> Long-life 15 hour battery.

> Meets and exceeds USEPA Method 21

(LDAR) requirements.

> Intrinsic Safety; Class 1, Division 1,

Groups A, B, C & D.

> Alarm level: Preset by operator.

> Response Time: <3 seconds.

> Accuracy: +/- 10% of reading.

HAND-HELD PORTABLE MONITORS FOR VOC’S

DataFID™ LDAdvance Portable Flame Ionization

Detection for LDAR Monitoring

GFM 430

Landtec GEM2000 Plus

Monitoring landfi ll gas extraction systems accurately and effi ciently

DataFID™ EV

Advance Portable Flame Ionization Detection for VOC Measurements

MicroFID

Portable Flame Ionisation (FID) Monitor

RENTAL DATALOGGING SERVICE GAS SALES


RENTAL DATALOGGING GAS


$


$

Applications: Landfi ll Analysers

> Landfi ll operations.

> Waste water treatment plants.

> Toxic gas surveys.

> Refi neries and petrochemical plants.

> Electric and gas utilities.

> Breweries.

> Marine and off -shore oil wells.

> Confi ned space entry.

> Food processing.

GFM410 GFM430 GEM2000 PLUS

Infrared CH4 Analysis 0–100% • • •

LEL 0–100% • • •

Infrared CO2 Analysis 0–100% • • •

Electrochemical O2 Analysis • • •

Electrochemical H2S Analysis • • •

Electrochemical CO Analysis • • •

Electrochemical SO2 Analysis – – –

Electrochemical NO Analysis – – –

Electrochemical NO2 Analysis – – –

Electrochemical CL2 Analysis – – –

Borehole (Low) Flow Measurement

Flow Range -60 to +100 L/hour – • •

Flow Resolution 0.1 L/hour – • •

Borehole Pressure +1000/-1000 Pa (Typical) – • •

Landfi ll Gas Analysers Chart

LANDFILL ANALYSERS


12

Gas Detection

& Monitoring

13

> Automatically self-zeroes every 5 hours, eliminating any potential drift.

> Single-point sampling.

> Two preset alarm limits.

> Annual recalibration with no down-time.

> Dual beam ultraviolet absorption module detector.

> Ranges: 1–200μg/m3.

> Response: <3 seconds to 90% when exposed to 100 micrograms of mercury.

> Sensitivity: 1μg/m3.

Aeroqual 300

Aeroqual 500


$

DATALOGGING SERVICE SALES

$DATALOGGING SERVICE SALES

$


$


$


$

Ion Science Mercury Vapour Indicator

No Saturation, No Regeneration

& Eliminates Instrument Downtime

Aeroqual 300 & 500

Ozone Monitor

RA915 Light

Portable Zeeman Eff ect AA Spectrometer

PetroPRO

PID Portable Gas Chromatograph

> Dual beam UV absorption technology.

> Fast 3 second response rate.

> Accuracy: ±5micrograms or ±10% reading.

> PTFE probe with moisture trap fi lter.

> Temperature: 10̊ C–50̊ C.

> The MVI off ers two detection ranges: 0.1–200 & 1.0–1999 microgram/cubic meter.

> Large digital display.

> Audible alarm.

> Available in 3 ranges; 0–0.500, 0–5.00 and 0–50.00ppm.

> Portable (5 hours run-time) or permanently mounted with power supply.

> Audible alarm.

> Interference free ambient air mercury vapour measurement.

> Direct measurement from 0.1–100μg/m3, no pre-treatment required.

> Inbuilt rechargeable battery for fi eld measurements.

> Inbuilt zeroing fi lter for zeroing in high background of mercury.

> Fast (2 minute), in-the-fi eld analysis of BTEX to ppb levels.

> Fully programmed method and compound library; no fi eld setup, data integration or interpretation required.

> Clear display of compound name and concentration.

> Self-contained with inbuilt ultra-zero air carrier gas cylinder.

> Datalogging, audible alarm, RS232 output.

Autozeroing Mercury Vapour Indicator

Continuous 24/7 Mercury Protection

NextStep

Portable Isocyanate Monitor

> Colorimetric paper tape technology for ppb level measurements.

> Models for TDI, MDI and HDI.

> Datalogging and audible alarm.

AIR-MET FIXED SYSTEMS> Pre and post sales technical support.

> National mobile service infrastructure.

> Multiple sensor options and products.

> Strobes, sirens, alarm SMS notifi cation.

Design, Installation, Commissioning, Service

& Calibration. We don’t sell fi xed system

equipment – we sell fi xed system solutions.

> 1–8 channels: 4–20mA and 0–1V gas sensor;

semiconductor, RTD and thermocouple

temperature sensor inputs.

> Large, high visibility LED scanning display.

> 8 customisable alarm relay outputs,

optional Modbus output.

> Datalogging and live reading software

options available.

> Wall mounted aluminium diecast enclosure.

> Wall mounted IP65 aluminium

diecast enclosure.

> Large range of electrochemical sensors

for oxygen and toxic gases.

> 4–20mA, 0–10V or 2–10V output options.

> 24V DC powered (3-wire).

> Optional aspirated sampling module.

> 1 or 2 points of detection from a single

head in any combination of gases.

> ‘Smart’ sensor technology; large range

of gases to choose from.

> Safety features include: automatic sensor

recognition; zero and calibration

fault protection; access code security.

> Explosion-proof housing.


> 4–20mA or 2–10V gas sensor input.

> Displays gas sensor type and

concentration on backlit LCD.

> 2 customisable alarm relay outputs

with LED status indicator.

> Internal power supply can power external

alarm devices.

> Integral Xenon strobe-light.

> 4–20mA output for BMS etc.

FIXED SYSTEM GAS DETECTION

GasCommander 800DL

8 Channel Fixed Gas Detection Controller

GasCommander 100

Single Channel Fixed Gas Detection Controller

MonoTox Transmit 5000

Remote Gas Detection Transmitter

iTrans

Fixed Gas Detection Transmitter


$

SERVICE SALES

$

SERVICE SALES

$


$


14

Air Sampling

15> Active sampling for higher accuracy.

> Tamper-proof and water resistant.

> Multiple analogue outputs.

> Digital outputs.

> Measurement range:

Low Concentration Ozone:

0.000–0.500ppm.

High Concentration Ozone:

0.00–5.00ppm.

> Sensor type: gas-sensitive semiconductor.

> Operating temperature: -5̊ C–500 C̊.

> Relative humidity: 95% maximum

(sensor head and base unit).

> Communication: RS485.

> Enclosure rating: IP20 & NEMA 1 equivalent.

> Renewable sensors for low cost operation.

> Response: T60 <30 sec.

> Accuracy: ± 10% F.S.

> Sampling styles: diff usion, continuous,

single point.

> Operating temperature: 0–40̊ C.

> Weight: <1kg.

> Gas specifi c sensors.

The Ion Science TVOC is a fi xed continuous

monitor for the detection and measurement

of total volatile organic compounds (VOCs).

> Humidity resistant PID.

> Selectable detection range 0–100ppm

or 0–1000ppm.

> Scaled 4–20mA analogue output.

> Intrinsically safe (ATEX).

> Operating temperature: -20–50̊ C.

> LED and 4–20mA output fault indication.

> Diff usive monitoring – no pump required.

> Multi-channel and multi-gas detection.

> Provides low ppm detection for all

refrigerants.

> Meets ASHRAE Std. 15, in addition to

mechanical, fi re & building codes.

> Three user alarms adjustable between

50ppm & 100% of scale.

> LCD shows PPM Concentration, alarm, test,

reset and fault diagnostics.

> Sensitivity: 20ppm.

> Measuring range: 0–1000ppm all

refrigerants.

> Response time: <1 minute per channel.

> Single or multipoint sensing.

> Upgradeable to newer refrigerants.

Aeroqual 900

Fixed Ozone Monitor designed to measure ozone concentrations

Haloguard III

Cost-eff ective photoacoustic infrared monitoring for wide area applications

Bionics Diff usion Gas Detectors

Simple, compact and complete toxic gas detection systems

Ion Science TVOC

Detection and measurements of total volatile organic compounds


$


$


$


$

> Programmable via keypad (PCXR8 only).

> Automatic fault shutdown with time

retention (PCXR4 and PCXR8 only).

> LCD shows sample duration, fl ow and

battery status (PCXR4 and PXR8 only).

> Sample hold feature (PCXR4

and PCXR8 only).

> PowerFlex Charger compatible.

> Programmable via PC (with DataTrac

software) or keypad.

> Direct fl ow control with internal fl ow,

temperature and pressure sensors.

> 8+ hour run-time with NiCd battery,

PowerFlex Charger compatible.

> LCD shows fl owrate, volume sampled,

battery status etc.

> CalChek direct calibration

system compatible.

> Programmable via PC (with Data

Trac software) or keypad.

> Advanced ‘predictive’ fl ow control

using internal pressure sensor.

> 12 hours run-time at 200mL/min

with NiMH battery.

> Fault shutdown with data hold.

> LCD shows sampling parameters,

battery and fault status.

> 8+ hour run-time with NiCd battery,

PowerFlex Charger compatible.

> Automatic fault shutdown with

time retention.

> LCD shows sample run time,

battery and fault status.

> Compact and lightweight.

SKC CONSTANT FLOW PERSONAL SAMPLING PUMPS

Pocket Pump

20–225mL/min Constant Flow Sampler

AirChek 52


AirChek 2000

Direct Flow Control 5–3250mL/min Sampler

Universal (XR Series)

5–5000mL/min Constant Flow Samplers

RENTAL SERVICE CONSUMABLES KIT SALES

$


$


$


$

AIR SAMPLINGPersonal and area sampling pumps, sampling media, sampling accessories,

calibration equipment and diff usive (passive) samplers for exposure level

measurement of gaseous, vapour, dust, aerosol and bioaerosol contaminants

in industrial, commercial and residential atmospheres.

16

www.airmet.com.au Sales 1800 000 744 Rental 1300 137 067 Air Sampling

17> 5–2500mL/min constant fl ow

with automatic fault shutdown

and time retention.

> Certifi ed intrinsically safe:

Ex ia Groups I and IIC.

> Programmable via keypad.

> LCD shows sample duration,

fl ow and battery status.

> Sample hold feature.

AirChek XR5000

Direct fl ow control with internal fl ow and temperature sensors

5–5000mL/min fl ow

LCD shows elapsed time and accumulated run-time

Programmable via keypad

Extended run-time (40 hours at 2L/min) with Li-Ion battery

> 10+ hour run-time with

disposable AA alkaline batteries.

> Automatic fault shutdown.

> Temperature compensated

fl ow control system.

> Small, lightweight, simple operation.

AirChek PCAZ8

AUSEx Certifi ed Sampler for Underground Coal Mines

AirLite



$

SERVICE CONSUMABLES KIT SALES

$

RENTAL DATALOGGING SERVICE CONSUMABLES KIT SALES

Pocket Pump AirChek 52 AirChek 2000 Universal Samplers AirLite AirChek XR5000

Flow Ranges (ml/min) 20–225 5–3,000* 5–3,250* 5–5,000* 5–3,000* 5–5,000*

Weight in Grams 142 567 624 964 340 454

Weight in ounces 5 20 22 34 12 16

Compensation Range(inches water)

Up to20 at 200ml

Up to25 at 2l

Up to30 at 2l

Up to40 at 2l

Up to20 at 2l

Up to10 at 5l; 50 at 2l

Built-In Timer/Clock Timer Timer# Clock Timer No Timer

Constant Flow Yes Yes Yes Yes Yes Yes

Programmable Yes No Yes Deluxe model only No Yes

PC-Compatible Yes No Yes No No No

Multi-Tube Sampling Yes

With adjustable low flow holder & constant pressure

controller


controller

With adjustable low flow holder


controller


controller

Flow Fault Feature Yes Yes YesEnhanced & deluxe

models onlyYes Yes

RFI-EMI Shielded Yes Yes Yes Yes Yes Yes

Corrects for Changes in Atmospheric Pressure No No Yes No No No

Corrects for Changes in Temperature No No Yes No Yes Yes

Battery Type Nimh or nicad Nicad Nicad Nicad AlkalineLithium-ion or alkaline

Battery Check Yes Yes YesEnhanced & deluxe

models onlyYes Yes

AIR SAMPLING COMPARISON TABLE

*5–500mL/min requires accessory | #224-52 and 224-52TX models only



> 4–14 hours run-time (dependant

on sampling head) with Li-Ion battery

or continuous via AC adaptor.

> Programmable sampling time

parameters via keypad.

> High-contrast digital display shows sample

duration, fl ow and battery status.

> Ideal for bioaerosol or asbestos

clearance sampling.

> Up to 30L/min free air fl ow; 2–12L/min

constant fl ow with critical orifi ce.

> 12.5L/min sonic fl ow for use

with BioSampler.

> 240V AC operation.

> Oil free rotary vane type pump with

vacuum gauge and control valve.

Vac-U-Go Bioaerosol Sampler

QuickTake 30

10–30L/min Constant Flow Sampler

Air Sampling

18


19Leland Legacy5–15L/min Constant Flow Sampler

Direct fl ow control with internal fl ow, temperature and pressure sensors

LCD shows fl owrate, volume sampled, battery status etc

24 hours run-time with Li-Ion battery

CalChek direct calibration system compatible

Programmable via PC (with DataTrac software) or keypad

SKC AREA SAMPLING PUMPS


$



> Up to 24 hours run-time (dependant on

sampling head) with sealed lead-acid

battery or continuous via mains adaptor.

> Programmable sampling time

parameters via keypad.

> Flow fault with run-time retained on LCD.

> Uses Leland Legacy pump and IMPACT

single stage inertial impactor for PM10

or PM2.5 sampling at 10L/min.

> Self contained with all accessories

in heavy duty lockable Pelican

carrying case.

DPS System

Portable 24 hour Ambient PM Sampling System

MCS Flite

3–20L/min Air Sampler

> Choice of 3 ranges: 5–500, 50–5000

and 300–30,000mL/min.

> Instant readout of fl ow rate with ±0.5%

of reading accuracy.

> Automatic calibration of Airchek 2000

and Leland Legacy with CalChek.

> Integrated interface software saves

calibration data as text fi le (Model 510)

or in searchable SQL database (Model 520).

> Instant readout of volumetric

fl ow rate with ±1% accuracy.

> 100mL/min – 7L/min model.

> Uses near frictionless

piston technology.

> Hands-free auto mode.

> 5 minute auto shut-off .

> Built-in leak test.

> 6–8 hours run-time with lead acid battery.

SKC AREA SAMPLING PUMP CALIBRATORS

Defender 510 & 520

‘DryCal’ Near Frictionless Piston Flow Calibrators

DryCal DC Lite

> Model 311–1000 laboratory fi lm fl owmeter

with tripod stand, 300–3000mL/min.

> Model 303 portable fi lm fl owmeter

in carrying case, 5–500mL/min.

Soap Film Flowmeters

> Available in various confi gurations,

fl ow ranges and accuracies for convenient

calibrations in the fi eld.

> Secondary standards only requiring

periodic calibration against a primary

standard.

Rotameters

RENTAL SERVICE CONSUMABLES SALES

$

RENTAL CONSUMABLES


$


$

20


21SKC BIOAEROSOL SAMPLING

> High collection effi ciency; preserves

micro-organism integrity and viability.

> Use with non-evaporating collection liquids

and Vac-U-Go Sampler (see Area Sampling

Pumps).

> Samples viable micro-organisms by

inertial impaction directly onto agar

culture media.

> Precision tooled 200 or 400 hole,

autoclavable aluminium impactor plate

and housing with SureLock positive seal.

> Use with QuickTake 30 Pump.

It is a requirement of our Australian

Dust sampling standards (AS 2985 & AS

3640) that ‘The pulsation ratio shall not

exceed 0.2 and preferably be less than

0.1’. This is easily achieved by choosing

SKC sampling pumps, the world leaders

in air sampling. Air-Met Scientifi c have

distributed SKC pumps for over 25 years.

For more information please visit

our website www.airmet.com.au

> Brochures.

> Manuals.

> Links to Australian Standards

and NIOSH & OSHA methods.

> User Guides.

> SKC Air Sampling Guides for pumps,

passive samplers and skin sampling.

> High collection effi ciency for spore

sizes ranging from 1.5–3.9μm.

> Well defi ned rectangular deposition

for easy microscopic analysis.

> Collection slide with optically clear

adhesive and positioning notches

and fl at edges for easy alignment

on microscope stage.

> Uniquely serial numbered for traceability.

BioSampler

For 8 hour sampling of Viable or Total Bioaerosols

VersaTrap

Cassette for Micro-organism Spore Sampling

BioStage

Single-stage Viable Bioaerosol Impactor

Air Sampling Tech Notes

Did you know?

SALES

$

SALES

$

SALES

$

ACCESSORIESAir-Met has been servicing customers with SKC accessories and consumables

for more than 25 years. If you need assistance with product selection or

application, contact your local Air-Met representative.

> Using advanced sorbent technology and designed specifi cally for OSHA, NIOSH, HSE and USEPA methods.

> Batch consistency and strict quality control ensure fewer desorption effi ciency determinations.

> Backup sections detect break-through and provide an indication of sample validity.

> A wide selection of tubes are available.

> Available in 25mL glass with a standard or fi tted nozzle or 60ml inert and unbreakable Tefl on.

> Diesel Particulate Matter cassette with impactor for EC analysis by NIOSH 5040.

> Sioutas Cascade Impactor for PM 2.5, 1.0, 0.5 and 0.25.

> IMPACT Single Stage Impactor for PM 2.5 or 10.

> Personal Environmental Monitor for PM 2.5, 10 and thorasic PM.

> Complete range of Membrane and Depth fi lters in a variety of materials, pore sizes and diameters to comply with all relevant air sampling methods.

> 25 and 37mm fi lter cassettes in styrene and polypropylene; special conductive black polypropylene cassettes with cowl for asbestos.

> Preloaded and matched-weight fi lters.

> Available in a variety of materials (FlexiFilm, PTFE, FlexFoil), septum/valve confi gurations and sizes.

> Strong, evenly sealed seams; ultra clean materials; leak tested.

> 225–69 Conductive Plastic Cyclone for respirable dust by AS 2985.

> Measures respirable dust.

> Constructed of conductive plastic.

> Eliminates the static problem allowing for accurate results.

> Filter cassettes available in 25mm or 37mm sizes.

The IOM Personal Inhalable Sampler is a conductive plastic sampling head, that houses a reusable 25mm fi lter cassette with specifi ed fi lter for the collection of inhalable airborne particles.

> IOM Sampler for Inspirable Dust by AS 3640.

> Effi cient particulate sampling up to 100μm.

> Removable 25mm cassette systemeliminates fi lter handling.

> Designed specifi cally for OSHA, NIOSH and HSE methods.

> Ready to use, mostly in preloaded cassettes.

> Convenient and safe alternative to impingers but limited shelf life.

Sorbent Tubes, Thermal Desorption Tubes, PUF Tubes

Impingers

Size Selective Samplers

Filters & Filter Holders

Sample Bags

Conductive Plastic Cyclone

IOM

Coated Filters for Vapours & Aerosols

SALES

$

RENTAL SALES

$SALES

$

SALES

$

SALES

$RENTAL

SALES

$

SALES

$

SALES

$

22

www.airmet.com.au Sales 1800 000 744 Rental 1300 137 067 Surface &

Dermal Sampling

23> Validated against NIOSH and ANSI

protocols for short-term, 8 hour and

24 hour sampling.

> Choice of sorbents for targeting

specifi c compounds.

> Superior collection effi ciency.

Provides reliable sampling of low-level

volatile organic compounds (VOCs)

without the use of a pump. Target chemicals

simply diff use from the atmosphere into

the sampler at a fi xed rate. Analysis is by

highly sensitive thermal desorption with

gas chromatography (GC).

SKC Ultra® Samplers use the same sorbents

and analysis providing low limits of detection

in the low ppb to ppt concentration range for

some chemicals. SKC Ultra® off ers the added

benefi ts of economy and convenience.

> UMEX 100 uses 2.4-DNPH for formaldehyde

and other aldehydes; complies with OSHA

Method 1007 and HSE Method MDHS

78. Validated for 15 minutes to 24 hour

sampling.

> 526 Series for formaldehyde based

on NIOSH Method 3500.

> UMEX 400 uses 1-NITC for amines;

based on OSHA Method 60.

> Validated for OSHA Method ID140 and

complies with HSE Method MDHS 16/2.

> Reusable capsule holder with replaceable

sorbent capsule.

Passive Samplers for Organic Vapours

Inorganic Mercury Passive Sampler

SKC Ultra® Passive Sampler

Passive Samplers for Formaldehyde

and Amines

SALES

$

SALES

$

SALES

$

SALES

$

SURFACE & DERMAL SAMPLINGSwabs and test kits for detecting skin and surface contamination due to lead,

cadmium, mercury, nickel, chromate, amines, isocyanates, fungal spores and

other biohazards occurring in industrial, commercial and residential environments.

> LeadCheck: 2μg sensitivity;

no false positives.

> MercuryCheck: 1–2μg sensitivity;

may be masked by copper and silver.

> NickelCheck: 1μg sensitivity;

no interferents identifi ed.

> CadmiumCheck: 1μg sensitivity;

may be masked by high levels

of chromium.

> ChromateCheck: 3μg sensitivity;

no interferents identifi ed.

> On the spot colour indication for

Amines, Isocyanates, Hydrazine

and Acids/Bases.

> Sensitive to levels equal or below

exposure levels for comparable

airborne contamination.

> Safe for use on skin or work surfaces.

> Completely safe, no reagents ever

touch test surface.

> Suitable for both fl at and irregular surfaces.

> Immediate colour change provides

instant results.

> Exposed wipes can be sent to laboratory

for further quantitative analysis.

> Highly sensitive, instantaneous

colour indication of contaminant

breakthrough.

> Available for Amines, Isocyanates,

Hydrazine, Acids/Bases and Solvents.

Colorimetric Swypes

For Screening Surface and Skin Contaminants

Full Disclosure Kit

For Instant Detection of Lead on Skin and Surfaces

Permea-Tec Pads

For Evaluation of Glove Protection in the Field

Heavy Metal Surface Sampling Swab Kits

Instant Colour Change

SALES

$

SALES

$

SALES

$

SALES

$

24

www.airmet.com.au Sales 1800 000 744 Rental 1300 137 067 Indoor Environmental

Monitoring

25> Wipe surface and send to laboratory

for quantitative analysis.

> Sturdy material holds together during

sampling but completely dissolves in hot

water or acid solution during analysis.

> Use for antimony, beryllium, cadmium,

chromium, cobalt, copper, iron, lead,

manganese, molybdenum, nickel,

vanadium and zinc.

> Includes 10 sterile swabs in transport

tubes and 10 templates.

> Designed to check meth remediation/

clean-up.

> Fast on-site results and high sensitivity.

> Easy to use.

> Everything required, included in kit.

> Convenient kit contains all materials

(except solvents) for OSHA wipe

sample methods.

> Samples for metals, pesticides,

amines, radionuclides, corrosives

and dusts.

Ghost Wipes

For Surface Collection of Lead and other Metals

Wipe Sample Test Kit

For Evaluating Surface Contamination

Sterile Surface Swab Kit

For Biological Sampling

MethChek

For Field Detection of Methamphetamine Residue

SALES

$

SALES

$

SALES

$

SALES

$RENTAL SERVICE DATALOGGING SALES

$

The Model 8345 has a digital display, a velocity range from 0–6,000ft/min (0–30m/s), and a temperature range of 0°–200°F (-18°–93°C).

Will display volumetric fl ow rates for measurements in ducts, and off er averaging capabilities up to 255 values in both velocity and temperature measurements.

INDOOR ENVIRONMENTAL MONITORINGReal-time monitors for continuous short or long-term measurement and logging

of indoor environment parameters such as carbon dioxide, temperature, relative

humidity and dewpoint.

> Measures CO2, RH, Temperature, Dewpoint,

CO (optional for Model 5000); optional

sensors for Air Velocity and Toxic Gases.

> 15+ hour run-time with AA alkaline batteries;

7 hours with optional rechargeable NiMH

battery; continuous via AC adaptor.

> Real-time readings with backlit LCD;

datalogging – QuestSuite compatible.

> Secure Pelican enclosure

(Model 5001 only).

> Measures and displays CO2, temperature,

humidity and CO simultaneously.

> 20+ hours datalogging with TrakPro

software analysis.

> Power from AA alkaline batteries

or AC adaptor.

Q-Trak Indoor Air Quality Monitor

Quest AQ5000/5001PRO

Portable Indoor Air Quality Monitor


$

ANEMOMETERS

RENTAL SERVICE DATALOGGING SALES

$

RENTAL DATALOGGING SERVICE SALES

$

> Accurately measures air velocity, temperature, calculates fl ow rate and determines average, minimum and maximum readings.

> Over 2800 logging samples with time and date stamp.

> Operating range 0–25m/s and 0–80°C with a resolution of 0.1m/s and 0.1°C using a 4" diameter rotating vane head.

Rotating Vane Anemometer TSI & Alnor Range

Hot Wire Anemometer

26

www.airmet.com.au Sales 1800 000 744 Rental 1300 137 067 Real-Time Dust &

Aerosol Monitoring

27

Simultaneously Measure Particulate and Gas Concentrations

> Reduces the need for multiple instruments.

> Lowers the cost of ownership.

Dial-in Rotary Impactor

> Twist and click selection of particulate settings: PM2.5, PM4, PM10 or TSP.

90° Light Scattering Photometer

> Mass concentration engine off ers real-time measurement of particulates.

Built-in Sampling Pump for Gravimetric Analysis

> Allows user to insert a 37mm fi lter cassette to capture particulates for laboratory testing.

EVM-3 Environmental MonitorReal-Time Direct Reading Particulate Monitor

The EVM-3 provides real-time direct reading of particulate concentrations, along with temperature and relative humidity measurements. The dial-in impactors allow for quick selection of particulate settings PM2.5, PM4, PM10 or TSP without disassembly.

A built-in air sampling pump assists in the collection of particulates while the laser photometer provides real-time measurement. A standard 25 or 37mm gravimetric cassette can be utilised for sampling and laboratory analysis, and help provide correlation for real-time direct reading measurements.

EVM-4 Environmental MonitorComprehensive Indoor Air Quality Analysis

The EVM-4 is designed for comprehensive indoor air quality analysis with its ability to simultaneously monitor and log one toxic gas, carbon dioxide, relative humidity and temperature.

The instrument’s compact size and displayed overview of parameters make indoor air quality assessment easy.

This versatile monitor features a tripod mount and security code protection for unattended stationary studies.

Additionally, the EVM-4 off ers calculation of room air exchange rates with carbon dioxide trending algorithms for in-depth air quality evaluation (with QuestSuite™ Professional II software).

EVM-7 Environmental Monitor

This instrument combines both the EVM 3 & 4 and a PID to provide a particulate and air quality monitoring in one instrument.

Quest Technologies EVM-7 off ers the unique capability to simultaneously measure particulates (mass concentration), volatile organic compounds (VOCs), toxic gas, carbon dioxide (CO2), relative humidity, temperature and air velocity (with optional accessory).

Applications

> Work site monitoring.

> Industrial fence line monitoring.

> Industrial hygiene surveys.

> Remediation sampling.

> Military site evaluation.

> IAQ walk through & stationary studies.

> Internal vehicle sampling (aircraft, trains).

> Air quality assessment.

> Construction/Mining site monitoring.

> VOC screening and monitoring.

> Time-history assessment.

> Regulatory compliance.

What do you get when you cross a real-time aerosol dust monitor, an indoor

air quality monitor and a PID? One very versatile instrument!

The Quest EVM Series of Particulate Concentration Air Quality Monitoring

RENTAL DATALOGGING SERVICE SALES

SERVICE DATALOGGING SALES

$

Dust Trak Environmental Enclosure

> Provides additional security and protection

of the Dust Trak.

> Sampling inlet is designed to sample effi ciently

in a broad range of wind conditions.

> The lead acid batteries included provide

24 hours run-time.

Haz-Dust I

Portable Real-time Particulate Monitor

> 0.01–20 and 0.1–200mg/m3 user selectable measuring

range, concentration displayed on LCD.

> 8 hours run-time with rechargeable NiMH battery.

> Optional datalogger including DustComm Pro analysis

and reporting software.

Haz-Dust IV

Personal Real-time Particulate Monitor

> 0.01–200mg/m3 measuring range from

0.1–100μm.

> Built-in pump with adjustable fl ow rate for

concurrent fi lter sampling with interchangeable

sampling heads (IOM, cyclone etc).

> 8 hours run-time with rechargeable NiMH battery.

> Attaches to waist belt.

Dust Trak & Dust Trak 2 Aerosol Monitors

Provides instantaneous readout of dust concentrations

> Real-time area dust monitor using the light scattering

principle.

> PM10, PM2.5, PM1.0 or respirable particle size ranges.

> Ideal for quick spot checks or long term advanced

logging modes.

> 31,000 data points for storage (21 days at 1 minute intervals).

High Volume Sampler

> Fully programmable up to 7 days.

> Maintains constant air fl ow while

using either TSP, PM10 or PM2.5 head.

> Supplied with fi lter support

and transport cover to alleviate

contamination of the sample.

> Quiet in operation.

> True mass fl ow sensor guarantees

fl ow control and accurate results.

Applications

> Ambient samplings of diff erent

parameters such as dust, asbestos

fi bres and gases.

> Quarries.

REAL-TIME DUST &

AEROSOL MONITORINGLight scattering devices for measuring and logging of airborne

particulate concentrations in the breathing zone and ambient air.

RENTAL CONSUMABLES

RENTAL DATALOGGING SALES

$

RENTAL DATALOGGING SALES

$


$


28

Radiation

Measurement

29

Air-Met Service will repair your instrument

and restore it to manufacturers’

specifi cations. Trained and qualifi ed mobile

technicians assess your instrument and

provide a detailed report and quotation

for repair.

To ensure your equipment is operating

correctly and monitors are producing

accurate results, regular maintenance,

service and calibration is required. Air-Met

maintains an AS-NZS 9001 Quality System,

registered and audited by Standards

Australia. In addition, our gas detector

calibration service is accredited

by NATA.

AIR-MET SERVICE, MAINTENANCE

& CALIBRATION

Speak to your local Air-Met representative about our comprehensive service management solutions.

> Six National Service and Repair workshops.

> On-site service via our fully equipped service vans.

> Fixed price one to fi ve year service contracts available.

> Extended instrument warranty solutions.

> ISO 9001 & NATA accreditation.

Air-Met will service all instrument brands – products include:

> Gas detectors.

> Sound level meters.

> Noise dosimeters.

> Heat stress monitors.

> Dust monitors.

> Air sampling pumps.

> Confi ned space monitors.

> PID’s.

> Indoor air quality.

> Radiation monitors.

> Water quality and environmental equipment.

Air-Met’s fully trained technicians care for your equipment, off ering the right advice, reliable technical service, fast turnaround times and quality calibrations. With service centres in most Australian mainland capital cities, there is one near you.

on, our gas detector

is accredited

q y

> Radiation monitors.

> Water quality and environmental

On-site service via our fully equipped service vans

RADIATION MEASUREMENT

Portable and personal devices for the measurement and protection against the damaging eff ects of electromagnetic, radio frequency and microwave radiation.

> Shows the source and magnitude of

individual contributions to the overall fi eld

strength and evaluates them on-site.

> Standard-compliant measurement with

isotropic (non-directional) results from

9kHz to 6GHz.

> Automatic antenna and cable recognition.

> Options:

Code-selective measurement

(UMTS P-CPICH demodulation).

Scope Mode.

> Used in broadcasting, telecoms, EDGE, WiFi,

WiMAX, mobile radio, radar and air traffi c

control.

> Various models available depending

on frequency range required and

exposure standard applicable.

> Audible and visual alarm if exposure

standard exceeded.

> Used in broadcasting, telecoms, mobile

radio, radar and air traffi c control.

> Isotropic measurement with internal

electric and magnetic sensors.

> Electric and magnetic low frequency

fi eld analysis up to 100kHz.

> Isotropic measurements with a dynamic

range of 140dB.

> Small size and optical fi bre connection

for spot measurements.

> Built-in FFT spectrum analysis.

> Wideband mode.

> Built-in rechargeable battery

with great autonomy.

> Optical Fibre Interface to PC

and 8053 Display.

RadMan & Nardalert Personal

Electromagnetic Radiation Monitors

SRM-3006

Selective Radiation Meter

EHP-50C

Electric & Magnetic Isotropic Field Analyser


$


$


$

30

www.airmet.com.au Sales 1800 000 744 Rental 1300 137 067 Radiation

Measurement

31

INDUSTRY & MEDICINE

METERS

EFA-300, ELT-400, THM1176-PDA, EHP-50C

SELECTIVE RADIATION METER

SRM-3000, SRM-3006, EHP-200

SIMULATION SOFTWARE

EFC-400TC

AREA MONITOR

2600, AMB 8057, AMS 8060, SMART II

BROADBAND METER

NBM, 8511, 8513, 8201, 8217

PERSONAL PROTECTION

RADMAN XT, NARDALERT XT

SATELLITE RADIO

MICROWAVESRADIO WAVES

TELEVISIONAC LINE VOLTAGE

CELLULARRADIO

0Hz30Hz

300Hz

3kHz30kHz

300kHz

3MHz

30MHz

300MHz

3GHz

30GHz

300GHz

DC ELF

LONG W

AVE

MED

IUM

WAVE

SHORT W

AVE

VSW/V

HF

UHFCEN

TIM

ETER

WAVES

(EHF)

MIC

ROWAVE

HEATI

NG

MIL

LIM

ETER

WAVES

(SHF)

SIMULATION SOFTWARE

EFC-400LF/PS

NBM 550

NBM 520

> Uses isotropic E-fi eld and H-fi eld probes

to measure the electric and magnetic

fi eld components – simply, precisely

and non-directionally.

Broadband Field Meter for Electric

and Magnetic Field Measurements

from RF to Microwave.

Features

> Available with Isotropic Probes to cover 100kHz to 60GHz.

> Plug-and-play Probe Interface with Automatic Probe Parameter Detection.

> Fully automatic zeroing.

> Extra small & lightweight.

> Easiest 4 button operation.

> Remote operation via optical link.

> Interoperability with NBM-550 (controller).

> Can also measure the true power

of pulsed electric fi elds if fi tted

with a suitable measuring probe.

Large graphic display

Stores up to 500 measurement results

Optional GPS and voice recorder

Stamps data log with co-ordinates and saves carrying

a notepad and pen while climbing towers

159mm



> Solar powered with GSM Modem (requires

DATA enabled SIM card for incoming and

outgoing data transmission and adequate

GSM coverage at monitor’s location).

> Variety of E-fi eld and H-fi eld probes

available.

> Detects electric and magnetic fi elds

from lowest of frequencies right up

to the high harmonic frequency range.

> Used in industry, medicine, power utilities,

electric railroads and public safety.

> Covers frequency range of EFA-300 as

well as pulsed magnetic fi elds used in

industry and the home.

> Direct evaluation of fi eld exposure in

comparison with major standards.

> Acceptance measurements to

CE standard IEC/EN 62233.

> Real-time measurement with RMS

and peak detector.

> Automatic evaluation even with diff erent

signal shapes.

> Optional 3cm2 probe for standard-compliant

determination of coupling factors.

Features built-in spectrum analysis of E-fi eld

and H-fi eld intensity vs. frequency in the

9kHz–30MHz frequency range, with no

or minimum perturbation of the fi elds

to be measured.

> Electric fi elds from 0.02–1000V/m.

> Magnetic fi elds from 0.6mA/m–300A/m.

> Auxiliary input for spectrum analysis

of external signals.

> Separate 3-axis and total values.

> Built-in frequency spectrum analysis.

> Maximum BW resolution of 1kHz

for detailed measurements.

> Calculation of the fi eld wave impedance.

> Built-in rechargeable battery.

EFA-300

Electromagnetic Field Analyser

ELT-400

Exposure Level Tester

System 2600

Continuous Electromagnetic Field Area Monitor

EHP 200

Electromagnetic Field Analyser


$


$


$


$

32

www.airmet.com.au Sales 1800 000 744 Rental 1300 137 067 Noise, Sound &

Vibration Monitoring

Features:

> All-in-one, stable functions provided

regardless of changes of temperature.

> Spectrographic data display function.

> Spectrum stabilisation.

> GPS/weather sensor options.

> ~25,000 dose rates.

> Internal: UPS & Built-in local data

display (option).

> Gamma ray (-ray) spectrum analytical

possibility, identifi cation of artifi cial

and natural radiation.

> Correction for temperature function

of the radiation detector Nal(Tl).

> Improvement of early warning function

by displaying visual information.

> Added user-friendly function for using

wireless communication, GPS, TFT-LCD

and large-sized semiconductor.

> Environmental friendly design.

> Autonomous temperature compensation.

> Artifi cial radiation discrimination.

> UPS >12hr.

> Internal data storage for 250 days.

> Nal(Tl) Detector for spectrum acquisition.

Applications:

> Radio-isotope.

> Nuclear power.

> Early warning radiation monitoring.

> Mineral processing of oil,

tin and uranium.

> Defence and boarder patrol.

Sensor

> Nal(Tl): <1mR/h.

> G-M (option): 1mR–1000R/h

(for high dose rate).

> GPS (option): Time & Position.

Autonomous Temperature Stabilisation

> Spectrum acquisition every 15 minutes

(adjustable).

> Dose rate estimation by total energy

and energy-band method.

> Autonomous gain control.

RaMon Software

Monitoring tasks and analysis are performed

by the PC-based versatile software – RaMon.

Adapted specially to the needs of early

warning environmental radiation monitoring

mission of the authorities.

The enhanced radiation monitoring system (EFRD series) is the Intelligent Spectroscopy Solution to Monitor, Measure and Identify Gamma Radiation.

EFRD 3300 Series

Environmental radiation monitoring system

IONISING RADIATION

MEASUREMENT

Eco Friendly Radiation Detector (EFRD) acquires the dose rate of environmental

radiation through the analysis of gamma-ray spectrum with Nal(Tl) and G-M

detectors. Its unique function includes the discrimination of the artifi cial

radiation from the natural radiation and the temperature stabilisation of the

acquired spectrum. Weather sensor, battery subsystem and internal memories

are implemented in order to increase data interpretability and system reliability.

F

A

re

S

S

G

~

In

d

G

p

a

C

o

T(ESG

EF

En

Ec

rad

de

rad

ac

are

>

>

>

>

>

>

>

>

T(SG

E

E

E

r

d

r

a

a

SALES

> Rugged, lightweight, simultaneous

analysis of up to four input channels,

each including 1/1 or 1/3 real-time octave

band data.

> Three channels typically for tri-axial

vibration measurements. Fourth channel for

simultaneous analysis of either sound or an

additional single vibration axis.

> QuestSuite compatible. Complies

with relevant ISO/IEC Standards.

NOISE, SOUND &

VIBRATION MONITORING

Hand-held and personal instruments for the measurement and logging of Noise Dose, Sound Pressure Level and Human Vibration Exposure in commercial and industrial workplaces.

> 3-channel measurements of tri-axial

vibration from power tools, machinery

and transportation equipment etc.

> User-confi gurable for occupational

hand-arm and whole-body vibration

exposure assessments.

> Monitors worker exposure levels providing

data for protection solutions.

> QuestSuite compatible.

> Advanced noise analysis with two ‘virtual’ sound

level meters running simultaneously; concurrent

A and C weighted measurements.

> Available in Type 1 or 2 and with QuestSuite

compatible datalogging (DL models only).

> Optionally equipped with 1/1 and/or 1/3 octave

real-time frequency analysis.

SoundPro SE/DL

Integrating Sound Level Meters

HAVPro Personal Human Vibration Monitor

VI-410Pro Real-Time Vibration Analyser



$


$

www.airmet.com.au Sales 1800 000 744 Rental 1300 137 067 Noise, Sound &

Vibration Monitoring

35

> Model 2100: 30–140dBA, 40–140dBC,

fast & slow response.

> Model 2200 Integrating SLM: 30–140dBA,

40–140dBC, fast, slow, impulse &

peak response.

> 2 or 4 independent Type 1 or 2

dosimeter channels per instrument.

> Go/No-Go Screen Icons for user-friendly

indications of exposure status.

> Optional vibrating belt clip prompts hearing

protection use and/or self-management of

daily noise exposures.


EDGE 3,4 & 5

Cable-Free Noise Dosimeters

Basic eg3 gives summary data report; advanced eg4 with

dual dosimeters and datalogging/time history; eg5 Australian

approved intrinsically safe dosimeter with C-A capability

Light weight (69gm) with thin, contoured mount

designed for wearer comfort

Rechargeable Li-Ion battery 60+ hour run-time

1 or 5 bay ‘EdgeDock’ docking station for recharging

and downloading data. QuestSuite compatible

> Ideal solution for regulatory

noise enforcement with optional

digital printer.

> Available in Type 1 (Model 1200)

or 2 (Model 2200).

> Selectable: A, C and Z weighting; fast,

slow, impulse and peak response.

> Model 1100: 30–140dBA, 40–140dBC,

fast & slow response.

> Model 1200 Integrating SLM: 30–140dBA,

40–140dBC, fast, slow, impulse &

peak response.

NoisePro DLX

Noise Dosimeters

SoundPatrol DP

Integrating/Printing Sound Level Meters

Type 2 General Purpose Sound Level

Meters

Type 1 Precision Sound Level Meters

RENTAL SERVICE DATALOGGING DOCKING SALES

$


$

SERVICE SALES

$SERVICE SALES

$

SERVICE SALES

$

EL-316 Noise Logger

Q2400 (Type 2)

Sound Pro SP DL (Type 1) Q1800 (Type 1)Q1900 (Type 1)

Accuracy 2 1 1

Weightings A or C A, C, Z and F A or C

Measurement Range (dB)

30–140dBA40–140dBC

0–140 dB 20–140

SPL Yes Yes Yes

Peak Level Yes Yes Yes

Max Level Yes Yes Yes

Min Level No Yes Yes

Lav/Leq No Yes Yes

Datalogging No Yes No

C – A No No No

Programmable No Yes Yes

Response Time Slow or Fast Slow or Fast Slow, Fast or Impulse

Applications: Noise Logger

> Noise Impact studies.

> ELS.

> Industrial hearing conservation strategies.

> Provide quick precise fi eld calibration.

> QC-10 calibrator is a general purpose

calibrator for use with noise dosimeters

and sound level meter type 2.

> Generates constant SPL of 114dB at

a fi xed frequency of 1000Hz.

> QC-20 calibrator is used with the type

1 sound level meter.

> Generates 4 diff erent outputs using

94dB or 114dB SPL and 250 or 1000Hz

frequencies.

QC-10 and QC-20 Calibrators Sound Level Meter Comparison Table

RENTAL SALES

ENVIRONMENTAL NOISE LOGGER

> Type 1 environmental noise logger.

> Completely self-contained, weatherproof

and portable unit.

> Capable of monitoring and recording noise

levels continuously for up to 3 weeks.

> A or C weighting.

> Measurement range 30–120dB.

> Continuous 90dB dynamic range.

> Fast response.

> Calculates and stores over 7500 sets

of Ln indices.

> PC required to set up system and download

data using software provided.

> Programmed timer modes.

> Measures Leq, Lmax, Lmin & Ln indices.

> Operates on a range of batteries depending

on use.


$

www.airmet.com.au Sales 1800 000 744 Rental 1300 137 067 Water & Soil

37

High quality heat stress measurement

with upgraded features including a newly

engineered Waterless Wet Bulb.

> Measure/calculate dry bulb, wet bulb &

globe temperature, WBGT indoor/outdoor,

relative humidity and Heat Index/Humidex.

> Real time clock provides accurate reporting

with time stamping.

> Stay time measurement per ACGIH TLV

Handbook, U.S. Navy PHEL charts, U.S.

Marine Flag system and EPRI Action Limits

(QUESTemp° 46 only).

> Optional detachable air probe (QUESTemp°

46 only).

> Environmental WBGT measurement

of potential heat stress conditions.

> Detachable sensor bar for remote

head/body/torso measurements.

> QuestSuite compatible datalogging.

> Optional Air Velocity sensor for Thermal

Comfort applications (Model 36 only).

HEAT STRESS MONITORS

Personal, portable and fi xed heat stress monitors. Used for the measurement and logging of the WBGT index as an indicator of thermal stress in high temperature, high humidity and high physical activity working environments.

Detects individual physiological response with

temperature of the external auditory canal near

tympanic membrane.

> User-selected alarm trip points provide audio

alert to elevated core temperatures.

> Recorded data can be used to evaluate

worker response to heat stress loads and

assist in developing preventive measures.


QUESTemp°II Personal Heat Stress Monitor

QUESTemp° 34 & 36

Portable Heat Stress Monitors

QUESTemp° 44/46



$


$

Water & Soil

YSI Pro Plus

The ultimate handheld sampling instrument.

Tougher. Smarter. More versatile.

Designed to be tough and smart in the lab or fi eld. And extremely versatile.

The Pro Plus accommodates any combination of YSI Pro Series cables,

sensors, and accessories. Want to measure DO in the fi eld? Maybe pH/ DO/

Nitrate? Or Perhaps you need it to be a lab instrument that measures BODs?

What ever you need, the Pro Plus is your choice.

WATER & SOIL37Backlit display and keypad

2,000 data-set memory with GLP event logging

Certifi cations: RoHS, CE, WEEE, C-Tick, VCCI, FCC, IP-67, 1m drop test

IP-67 waterproof instrument (fl oats) with 3 year warranty; 2 year cable warranty

DO, pH, Conductivity, ORP, Ammonium, Nitrate, Chloride, Salinity,

Total Dissolved Solids, Barometric Pressure, Resistivity

Interval or single-event logging capability

Easy-to-use software to manage all you data

TougherDo your job with confi dence even in the harshest

fi eld conditions. The drop-tested Pro Plus was

designed tough with military-spec connectors, a

two-year warranty on all cables, weighted sensor

guards, and a rubber over-moulded case with

three-year warranty. Its interchangeable sensors

and extra-durable cables eliminate down time.

And its low overall cost of ownership means

you’re making a worthwhile investment for

years to come.

More VersatileConnect any cable and probe option to the

instrument and use the convenient cable

management kit to keep everything simple and

organised. Cable options range from 1–30m

choices (up to 100m on DO only cables). Use

lab or fi eld probes and switch between the two

quickly. The Pro Plus makes an ideal lab BOD

instrument with the proven self-stirring BOD

probe. A convenient hand strap can be used on

either side of the instrument. A complete family

of accessories also increases the versatility

of the Pro Plus. Choose among accessories

including carrying cases, fl ow cells, cable

weight, belt clip, tripod, and c-clamp.

SmarterThe technology-smart YSI Pro Plus has all the

built-in support you’ll need for the lab or fi eld. It

provides multiple languages, detailed GLP data,

on-screen help to eliminate the need for a bulky

manual, sensor diagnostics, up to six-point auto-

buff er recognition, re-cal prompts, user-defi ned

auto-stable function, and security passwords for

extra protection. And much more.

RENTAL DATALOGGING SERVICE CONSUMABLES SALES


With the 9300 and 9500 photometers, you

can eliminate sample preservation by taking

your portable, waterproof instruments to the

fi eld to perform the analysis onsite.

> Direct reading concentrations.

> Waterproof IP-67 rating.

> Large, backlit graphic display.

> Multiple languages.

> Waterproof USB connection that can also

power the instrument (9500 model).

> Internal memory for 500 sample sets

(9500 model).

38

Water & Soil

39

Water & Soil

A handheld DO meter that provides extreme

durability for measuring dissolved oxygen

with optical, luminescent based technology

for any fi eld application.

> Smart data management with 500 data-set

fi le and site list memory with Data Manager

desktop software.

> Certifi cations: RoHS, CE, WEEE, C-Tick, VCCI,

IP-67, 1m drop test, Assembled in USA.

> No fl ow requirement/Non-consumptive.

> Probe fi ts standard 300ml BOD bottles.

> Multi-lingual.

> 3 year instrument warranty and a 2 year

cable and probe warranty.

Waterproof, rugged and reliable, the YSI

556 MPS (Multiprobe System) combines the

versatility of an easy-to-use, easy-to-read

handheld unit with all the functionality of

a multiparameter system.

> Field-replaceable DO, pH & pH/ORPprobes.

> RS-232 and Compatible with Ecowatch™

for Windows™ data analysis software.

> Easy-to-use, screw-on cap DO membranes.

> User-upgradeable software from YSI website.

> Optional barometer.

> Data memory: 2,000 data sets (data, date,

time, user-defi ned info); 100 GLP fi les.

> Data Manager desktop software included;

100 user-defi ned folders and site names.

> 3 year warranty.

Waterproof, rugged and reliable, the YSI

550A is designed for the fi eld with innovative

fi eld replaceable DO electroded modules.

> Screw-on cap membranes.

> Certifi cations: CE, IP-67, high impact

resistance.

> Dissolved Oxygen (%) Range (Steady-

state polarographic sensor): 0–500%

air saturation.

> Dissolved Oxygen (mg/L) (Polarographic

sensor) Range: 0–50mg/L.

> Temperature: -5–45̊ C.

> Over 2000 hours battery life.

> Calibrate in either mg/L or % saturation.

Multiple Parameter Combinations

The sensor probe can measure up to 11

parameters out of 17 available (pH, ORP, DO, EC,

Turbidity, Temperature, Salinity, Total dissolved

solids, Specifi c gravity and Water depth plus

Chlorophyll and Ions of NO3-, Cl-, F-, Ca2+, K+,

NH4+).

Newly Developed High Performance Sensors

pH sensor is equipped with our patented

‘Strong’ electrode which is far more robust than

conventional glass electrodes while retaining

excellent sensitivity.

The DO sensor also has a patented design which

allows it to function even under non-fl owing

conditions. Conventional DO electrodes require

continuous sample fl ow to operate correctly.

Compact Sensor Probe

45mm outer diameter sensor probe fi ts into

a 2" well.

Robust Sensor Probe

Resisting sea water and high pressures, the

robust sensor probe facilitates measurements as

far as 100m below the water surface and up to

max pressure of 1 MPa (excluding ion sensors).

Data Logging Storage Capacity

Built-in memory stores measured data for 35

days of continuous measurements (based on

measurement every 15 minutes). The probe

section can be disconnected from the meter

and will continue to measure and record data.

This data can be retrieved by the meter when the

sensor cable is reconnected and then transferred

to a personal computer in CSV format.

Flexible Interface Port

Compatible with Global Positioning System (GPs)

An interface port is available for connection to

GPs, Printer, RS-232C, LAN, Cellular phone or

other data communication peripherals.

> Measures pH, redox, conductivity, salinity,

dissolved oxygen and temperature

simultaneously.

> Full datalogging capabilities with

up to 1808 readings.

> Ideal for remote monitoring with its

5m long cables and rugged design.

> Operates on 7.2V rechargeable Ni-Cad battery

with a low warning symbol at 5.6V.

90FLMV MultiparameterWQC-24 Features

WATER QUALITY METERS

YSI ProODO Dissolved Oxygen

YSI 556MPS

YSI 550A Dissolved Oxygen

SERVICE DATALOGGING CONSUMABLES SALES

$


$


$


$

RENTAL SERVICE DATALOGGING CONSUMABLES SALES

Model WQC-24 Multiparameter Water Quality Meter (8–11 parameters plus water depth available)

The Model WQC-24 is the latest development in DKK-TOA’s range of multi-parameter water quality meters. This instrument combines a compact, high performance and robust water quality monitoring system.

The 45mm outer diameter sensor probe can provide measurement of up to 11 parameters simultaneously out of a total of 17 available parameters. The instrument also features an interface port for connection to a Global Positioning System (GPS), Local Area Network (LAN) printer or other communication peripherals.

8 Standard Parameters

> Max 11 Parameters out of 17 available.

> Optional water depth sensor.

> Independent Sensor Memory/Logger.

> RS232 Interface for external peripherals.

> Waterproof meter (IP-67, submersible).

> GPS receiver compatible.

> Base confi guration includes pH, DO. turbidity,

temperature, conductivity, salinity, total

dissolved solids, and specifi c gravity.

> Options for ORP, specifi c ions including nitrate,

chloride, fl uoride, calcium, potassium, and

ammonia ion and chlorophyll.

> Measurement to a depth of 100m is possible.

meter Water Qualvailable)

ty

ning

y,

ate,

ity Meter

9300/9500 Photometer

Waterproof, rugged, easy to use photometers

WATER QUALITY METERS

RENTAL CONSUMABLES KIT

40


41 Designed for single and multi-stage pressure

or vacuum pumping liquids. Ideally suited for

fi eld sample removal from shallow wells and

all surface water sources or for laboratory use.

> Exceptional fi eld durability.

> Operate from 60–600rpm.

> Up to 1L/min delivery rate.

> Two pumping stations available, which can

be piggy backed for multi-station pumping.

> Operate to a depth of 8.23m.

> Variable speed control.

> AC, DC or an AC/DC combination available.

> Reversible fl ow feature for back-fl ushing.

> Disposable and dedicated tubing means

controlled costs and no decontamination

issues.

The ultra reliable mini-compressor inside

the Geocontrol PRO allows you to sample

from depths to 30m! No more lugging heavy,

dirty, and noisy compressors into the fi eld

or those dangerous nitrogen cylinders. The

Geocontrol PRO saves you time, money and

your back.

> Built in high performance air compressor,

allowing you to sample to depths of 30m.

> Compact and portable.

> Controls all portable and dedicated bladder

pumps, and most air-lift pumps on the

market today.

> Operates from 12V DC car battery, with an

option for a portable rechargeable battery.

Simple to use and operate, the Geotech

Geocontroller 2 utilizes advance electronic

logic to control both high rate purging and

gentle low fl ow sampling.

> Microprocessor controlled for use in

both high rate purging and gentle low

fl ow sampling.

> Operates on 115V AC or 12V DC.

> High pressure operation to 300psi.

> Adjustable fi ll rate control.

> Built in pressure regulator and gauge.

> Operates to depth of 210.3m.

Designed with input from fi eld technicians

who actually do the sampling! Single turn

release heads and quick change bladders

have been incorporated for quick in-the-fi eld

bladder changes and easy decontamination.

> Constructed of 316 stainless steel for

unsurpassed durability.

> Quick change bladder confi guration; bladders

can be changed quickly and easily without

the use of tools.

> Compatible with the GeoControl Pro

and Geocontroller 2 units.

> Maximum operating pressure: 100psi.

Geotech Peristaltic Pump

Geotech Portable Bladder Pumps

Geotech Geocontrol PRO

Geotech Geocontroller 2


$


$


$


$

Solinst 122 Interface Meter QED MP30 Drawdown and Water Level Meter

> Provides accurate measurement of product level and thickness in wells and tanks.

> Determination of both fl oating no-aqueous liquids (LNAPL) and sinking no-aqueous liquids (DNAPL).

> Stable electronics with automatic circulatory testing.

> Tape uses stranded stainless steel conductors.

> Non-stretch tape does not corrode.

> Tape resists kinking and breaks.

> Sturdy free-standing reel with carrying handle.

> 30, 50 & 80m available.

Designed to help control drawdown during monitoring well purging. When connected to the MP10 Controller, pump operation is automatically paused if the selected drawdown limit is reached after which it will resume when the well recovers. Intrinsically safe design and approved for hazardous environments.

> Controls drawdown during well purging.

> Can be connected to the MP10.

> Rent as individual or as part of a kit.

Solinst 101 Water Level Meter

> For measuring the depth of water in wells, boreholes, and standpipes.

> Markings each millimeter.

> Sensitivity adjustable to conductivity.

> Shielded probes to avoid false readings.

> Permanent, heat impregnated markings.

> Non-stretch stainless steel conductors.

> Rugged, corrosion proof components.

> Strong, fl exible tape.

> 50m available.

Testwell Water & Interface Meters The Testwell range of water level meters, interface meters, reels and tapes, are simply the best choice for 2", 4" and also small diameter well applications. Standard oil/water interface meters produce fast clear readings, unbreakable reels and provide unmatched fi eld performance. Dipmeters (water level indicators) are portable instruments for measuring water levels in wells, standpipes and boreholes.

With several thousand units sold worldwide, Testwell Instruments have a highly respected proven track record. Testwell Instruments have a wide range of available probe diameters ranging from 7, 10, 11 and 16mm. Dipmeters are available in lengths from 10–900+ metres, with diff erent tape options available for more aggressive environments. A variety of options are available including temperature sensors.

Infrared refraction is used to detect liquids and conductivity is used to detect the water. For heavy viscous oils, detect water sensitivity quickly by increasing the external sensitivity control. For high conductivity water (brine) decreasing the sensitivity control prevents bridging so a moist probe is not detected as being in water.

Water Level Meter Probes

Triple-sealed probes do not need to be accessed by the user. Using ‘smart electronics’ the probes will ignore any damage to the optical lens and continue to perform. Similar to a water level meter, the units will produce a solid tone in water and an intermittent light and tone indicates product. This system doubles the battery life and provides better overall performance.

Proven & Rugged Optical Sensor

Two separate sensitivity controls for the water sensing and fl uid sensing circuits allow the user complete control over the performance of the instrument.

Most Accurate Tapes

Designed specifi cally for measuring product and organic solvents and four times more accurate than the commonly found fl at white TV cable-type tapes. These tapes use twisted stainless steel wires that can untwist and lengthen from the weight (2.27kg) of the probe and cable. The fl at spring steel measuring tape of the Testwell units has a breaking strength of 134.72kg and will not stretch (less than .001") with a 15.88kg load. The measuring tape was designed for environmental use and is resistant to all solvents found in the fi eld.

RENTAL SERVICE CONSUMABLES RENTAL SERVICE CONSUMABLES RENTAL SERVICE CONSUMABLES


WATER & INTERFACE METERS PUMPS

42


43 Designed to pump fl oating hydrocarbons,

leachate, condensate and total fl uids

applications. The 1.66 Auto-Reclaimer

is operated automatically, and needs

no controller.

> Design to withstand the harshest and most

corrosive environments such as refi neries,

landfi lls or mines.

> Smart data management with 500 data-set

fi le and site list memory with Data Manager

desktop software.

> 2" diameter wells.

> Flow rates up to 11L/min.

> Working pressure as low as 1psi above

head pressure.

> Options include: Quick connect fi ttings, top

or bottom loading confi gurations and dual

loading confi gurations.

The most versatile single stage DC pump in

the industry. Designed with all stainless steel

components, the SS Geosub allows you

to sample in the harshest well conditions

with confi dence.

> Most powerful pump in the industry, sample

from depths to 60.96m.

> Low fl ow sampling rates to 10ml/min using

the Geotech Buck/Booster.

> User enabled dry-run protection.

> Easy to decontaminate.

> Field replaceable motor lead kits available.

> Optional portable reel systems or dedicated

well systems available to meet your needs.

Ideal for providing representative samples

due to the low rpm motor and user

controlled fl ow rates. The Fultz Pump is

of low maintenance making it ideal for

both remote fi eld work and long term

monitoring projects.

> For 50mm or larger monitoring wells.

> Operating temperature between 0–40 C̊.

> No need for ‘cool down’ period to prevent the

motor from overheating as long as the pump

is immersed in water.

Designed to pump fl oating hydrocarbons,

leachate, condensate and total fl uids

applications. The 3.5 Auto-Reclaimer is

operated automatically, and needs no

controller. Everything needed to operate

the system is built into the pump.

> Intrinsically safe design and approved

for hazardous environments.

> 4" or larger diameter wells.

> Ability to pump from 152.4m.


> Optimal working pressures as low as 1psi

above head pressure.

> Standard light-weight composite housing,

corrosive resistant stainless steel parts for

less maintenance.

Geotech 1.66 Auto-Reclaimer

Geotech 3.5 Auto-Reclaimer

Geotech SS Geosub 12V DC Submersible Pump

Fultz Electric Submersible Pump Series


$


$



Together with the United States Geological

Survey, Geotech designed the original

bladder pump for groundwater quality

and pollution monitoring and has further

developed what is known today as the

Geotech family of Bladder Pumps.

> Proprietary resin grade virgin PTFE bladder

for long life.

> Constructed of #316 stainless steel

for durability.

> Designed for wells as small as 0.75".

> Can pump to the surface from as deep

as 304.8m.

> Dedicated or portable turnkey systems.

> Optional Drop-Tube assembly available

for sampling from greater depths.

A positive air displacement pump designed

for hydrocarbon recovery, leachate, and

condensate in total fl uids applications.

> Intrinsically safe design and approved

for hazardous environments.

> Corrosive resistant materials for less

maintenance.




> Constructed of stainless steel for durability.

> Operating pressure between 10–300psi.

A positive air displacement pump designed

for hydrocarbon recovery, leachate, and

condensate in total fl uids applications.

> Corrosive resistant materials for less

maintenance.




> Constructed of stainless steel for durability.

> Operating pressure between 10–300psi.

> Optional Tankfull Shut-Off , standard well

caps, fl anged well caps and pump cycle

counter.

Custom manufactured to your specifi cations.

Pumps are secured in place with your choice

of well caps and tubing. Geosmart™ pump

systems save you installation time and

virtually eliminate the potential of cross

contamination as compared to portable

systems.

> Install in 10 minutes or less.

> Low fl ow sample rates.

> Choose from electric or pneumatic pump

systems.

> Geosmart™ systems available for 0.75"

or larger wells.

> EPA Approved method for VOC collection.

Geotech Bladder Pumps

Geotech Geosmart™ Dedicated Sampling Systems

Geotech 1.66 Reclaimer

Geotech 3.50 Reclaimer


$


$


$


$

ELECTRIC SUBMERSIBLE PUMPS

Water & Soil

44


45

RENTAL KIT

MP15 Compressed Gas System

Compressed Gas Systems

Petrol Compressor

12V Compressor

> The CO2 cylinder provides hours of sampling power.

> Combines advanced low fl ow control with the quiet power of a compressed gas source, for the ultimate in portability and ease of use in sampling ground water with bladder pumps.

> Hired with the QED MP15 controller.

> Includes the convenience of a back pack for remote locations.

The CO2 cylinder provides hours of sampling power. The Compressed Gas System combines the advance low fl ow control with the quiet power of a compressed gas source for the ultimate in portability and ease of use in sampling groundwater with bladder pumps.

> Use with QED or Geotech controllers.

> Easy to operate.

> Portable.

The Direct Drive 5.5HP Compressor Petrol

Honda™ Engine Series is the very best serious portable petrol powered air compressor available anywhere! In addition these units are fi tted with an exclusive Renegade patented air solenoid system.

> Fitted with the exclusive Renegade patented air solenoid system.

> 5.5HP Honda™ petrol engine.

> Alternative to gas compressors for your low fl ow systems.

The alternative option to using CO2 gas. Simply hook the alligator clips to your car battery and begin sampling. The 12V compressor connects to any 12V Battery (12V batteries are available on request).

> Use with QED or Geotech controllers.

> Features a safety shield between the motor and carry handle to protect both the user and the instrument.

Flow Cells

Compressed Gas System Trolley

> Flow cells are available for TPS 90FLMV, YSI ProPlus, WQC-24.

> Can be hired separately or with the TPS 90FLMV Combination Meter.

> Can be hired separately or with the TPS 90FLMV Combination Meter.

> For use with low fl ow systems.

RENTAL SALES

$RENTAL CONSUMABLES KIT RENTAL SALES

RENTAL KIT RENTAL SALES

$

HydraSleeve™ makes groundwater sampling

a simple, three-step operation that is more

eff ective than bailers, passive diff usion bags,

portable or dedicated pumps.

> For use in groundwater sampling.

> Easy to operate.

> Eff ective – sample for all compounds.

> Inexpensive.

> Collects samples in less than 15 minutes.

Provides the mechanical actuation for

pumping with inertial pumps to depths of

over 60m, in a fully portable, single operator

power unit.

At 13kg, the PowerPack PP1 provides

outstanding pumping performance. The PP1

is powerful enough to lift water from over

60m depth using the Standard Flow System,

and is so compact that it fi ts onto a

back-pack frame.

> Suitable for use with standard fl ow, high fl ow

and low fl ow inertial pumps.

> Includes backpack frame for portability.

> Petrol powered Honda™ GX25 25cc mini

4-stroke OHC engine.

> Reduces fatigue when purging large volumes.

The most powerful pump actuator

manufactured by Waterra. Powered by a

Honda™ GX100, 3 horsepower, 4 stroke,

petrol motor, this actuator generates a 6"

stroke and can operate both the Standard

Flow System and High Flow System to their

maximum eff ective depths.

> For inertial pumps.

> Fully adjustable.

> Monitors well to depths of up to 91.44m.

> Powered by a Honda™ GX100, 3 HP, 4-stroke

petrol motor.

Waterra locking well caps are designed for

securing wells against unnecessary intrusion.

Waterra well caps are available for 2" and 4"

monitoring wells.

HydraSleeve™ NO Purge Sampler

Well Caps

Waterra PowerPack-PP1

Waterra Power Pump-2

SALES

$

SALES

$



SAMPLERS AND WELL CAPS

ACTUATION PUMPS

SYSTEMS ACCESSORIES

$

46


47

YSI’s Level Scout provides highly

accurate level measurements with

multiple logging options. The Level

Scout’s pressure sensor technology,

low power consumption, rugged

housing and connectors, and easy data

management make it ideal for your next

level monitoring application.

> User-replaceable batteries prevent

costly down-time and potential loss

of valuable data.

> User-selectable sampling rates allow

you to take readings as fast as

15 per second.

> Use one instrument for various

applications with multiple data

logging modes that include linear,

linear averaging, event triggered,

and logarithmic.

> Instrument fi rmware can be upgraded

from our web site keeping you from

sending in your instruments.

> The YSI Level Scout is available as:

– absolute or vented

– stainless steel or titanium

– 2mb (+1.0°C) or 4mb

(+0.2°C) of memory

> Connect the Level Scout to your

laptop or pocket PC in the fi eld to

view real-time data, setup logging

tests, and download logged data.

Data Scout Advanced.

Each Level Scout comes with 3 software

programs to meet your application

needs. Data Scout desktop software

allows you to confi gure the Level Scout,

set up to 16 independent tests, view

real-time data, download logged data,

and setup alarms. Data Scout Advanced

desktop software can perform all of

these tasks plus display tabular and

graphical data, correlate barometer

data, and convert pressure and

temperature units of previously logged

data. Data Scout Mobile can be used

on pocket PC devices.

Designed to recovery hydrocarbons

with specifi c gravity <1.0 and

viscosities between 50–400 SSU.

> Requires no power.

> Screens available in three mesh

sizes.

FREE PHASE REMEDIATION EQUIPMENT

A high effi ciency product recovery

system capable of recovering

Light Non-Aqueous Phase Liquids

(LNAPL) from water.

> Intrinsically safe, explosion-proof

design.

> Recovers hydrocarbons to a sheen.

An independently fl oating passive

hydrocarbon skimmer.

> Equipped with a visual alarm.

> 2L reservoir.

> Body and hoses made of

polyethylene. Check valves

made of nylon.

Designed to recover hydrocarbons

from 2" or 4" and larger wells.

> Heavy duty #304 stainless steel screen

assembly.

> Tefl on coated stainless steel hanger.

> Ballast weight for optimal submergence.

Eff ectively separates hydrocarbons

from water.

> Portable and electrically safe for use

in hazardous locations.

> Intrinsically safe explosion proof

design.

> Up to 4gpm at 65psi product

recovery rate.

Designed to recover a wide range

of fl oating hydrocarbons, the

small diameter fi lter scavenger

is ideal for wells with static fl uid

levels down to 46.1m deep.

> Designed to fi t into a 4" (10cm)

well or larger.

> Recovery rate: 0.5gpm.

A hydrogen recovery system that

is available in both AC and Solar.

> Compact and easy to install.

> Extracts fl uids from depths

of 54.86m.

> Recovers viscous hydrocarbons.

A passive skimmer with a fl oating

intake that separates and recovers

light hydrocarbons from groundwater.

> Available in 2" PRC or 4" PRC.

> Quick fi ll time – about 15 minutes

with ample product.

> Protected easy release drain valve.

ORS Large Diameter Filter Scavenger™ORS Filter Bucket™

Geotech GeoSorb ORS Large Diameter Dangle Scavenger

ORS Small Diameter Filter Scavenger

Geotech SipperORS Gravity Feed Filter Scavenger

Keck PRC Passive Skimmer

SALES

$SALES

$

SALES

$SALES

$

SALES

$

SALES

$SALES

$

SALES

$

YSI Level Scout

Level measurements provide the fundamental source of knowledge for highly dynamic ground water systems.

RENTAL SERVICE DATALOGGING CONSUMABLES SALES

undamental namic

Hydrologic stresses on these systems

aff ect recharge, storage, and discharge

rates. Long-term water level measurements

provide data to evaluate, develop, design,

implement, and accurately monitor the

eff ectiveness of ground water use and

management decisions.

48


49

When used in conjunction with Geotech or other vendor supplied equipment, ORS Control Probes can aid in facilitating operation and process control in a variety of environmental remediation equipment applications.

> Features intrinsically safe voltage design.*

> Stainless steel shaft.

> Float material designed for use in most hydrocarbon/water applications.

> Available in NO/NC options.

A specially designed microprocessor based industrial control panel for operation of a wide variety of industrial equipment.

> Weatherproof NEMA 4X(IP66) enclosure.

> Large hand/off /auto switch controls for direct control over individual system devices.

> A four button keypad is used to change menu and status display.

> A bright 16x2 character vacuum fl uorescent display.

A patented insitu remediation system. Unlike other commercially marketed in-well air strippers or circulation type systems, the Plume Eater’s process is unique. When pulling in contaminated groundwater, it strips away the VOC’s while oxygenating the treated water before it is re-introduced deep into the formation.

> Accelerates bio-remediation.

> Soils are fl ushed with oxygenated groundwater.

> Works on a variety of soil types.

LO-Profi le Air Strippers. The ORS LO-PRO™ models II and III are highly effi cient water treatment systems that can remove up to 99.99% of many volatile organic compounds (VOC’s) from water.

> Patented multi-stage counterfl ow aeration provides up to 99.99% removal effi ciency.

> Highly eff ective on BTEX, MTBE and Radon.

> Very easy to install and maintain.

> Lightweight modular polyethylene trays allow the addition or subtraction of trays to meet engineered treatment requirements.

Commonly used for obtaining disturbed

samples at or near the surface and for

boring to depths where samples may

be obtained with a soil sampler or soil

core sampler. AMS augers are available

in stainless steel for EPA testing or

carbon steel bits with stainless steel

cylinders for general soil sampling and

augering.

Perfect for augering shallow depths,

AMS soil augers can also auger deeper

depths and are generally limited by only

the time and muscle of the user.

> Most models available with

a threaded or Quick Connect

connection.

> A rounded bail for added torque

resistance.

> Stainless steel cylinder for easier

decontamination.

> Specially formed bits that dig and cut

through the soil at the same time for

easy penetration.

> Cut hole up to 1/4" larger than the

cylinder to minimize drag.

> Heads available:

– Regular/Soil

– Clay/Mud

– Sand

SERVICE SALES

$

SERVICE SALES

$

SERVICE SALES

$

SERVICE SALES

$

Sludge & Sediment Samplers AMS Sludge Sampler

Split Soil Core Samplers

Are essentially soil core samplers that have

been designed to retain samples from non-

cohesive materials – including: underwater

sediment in shallow lakes, streams, and

various types of impoundments. They can

be used to take undisturbed samples for

geotechnical analysis and are capable of

taking high-quality samples for chemical

analysis.

> Primarily used for shallow sampling,

they can be used up to 10'. in the

right conditions.

> Used with or without liners.

> Very portable and do not require extensive

mobilisation and demobilisation.

Has a vertically split cylinder (cup set) that

allows easy extraction of the soil core from

the liner and prevents breakage of the core.

Use it without a liner to collect undisturbed

cores for immediate fi eld examination and

testing, or it can be used with a liner for

collection of undisturbed, sealed cores.

SOIL

RENTAL CONSUMABLES SALES

$


TOTAL FLUID & DISSOLVED PHASE GROUNDWATER REMEDIATION

AMS Soil Augers


$

ORS LO-PRO™

Geotech Plume Eater

ORS Control Probes

Geotech ECM (Environmental Control Module)

* Intrinsic safe applications require customer

supplied intrinsic barriers.

50


51

The fl uropolymer tubing may be used to transfer

the soul gas sample from the sampling point

to the surface. Cut a length to allow for the

maximum sampling depth plus 0.6–0.9m. Attach

one end to the sampling top and pass the other

end through the fi rst set of drive components.

When each GVP extension is driven to just above

the ground surface the drive head adapter is

removed, another GVP extension added, and the

drive head adapter is replaced before driving

again. To open either of the tips, pull back the

GVP extension to expose the tip extraction ports.

A hand vacuum pump, electric vacuum pump,

or electric vacuum station may be attached

to the upper end of the fl uropolymer tube to

extract samples of soil gas and allow them to

be collected in a variety of specifi c procedures.

Alternatively most PID and FID hydrocarbon

detection instruments are provided with a

positive displacement pump that may be directly

connected to the fl uropolymer tube to obtain a

direct reading of hydrocarbon concentration.

The extendable tile probe may be used to check

for underground obstructions. It may also be

useful as a pre-probing tool in non-caving soils,

before installing the probes.

AMS GVP kits may also be used to provide a

conduit for extracting groundwater samples.

Images:

Above: Collecting a soil gas sample using an AMS GVP kit.

Top Right: Soil gas sample being collected using an

AMS GVP rod with a regular 5/8" threaded slide hammer.

Bottom Right: Removing gas vapour probe rod using

AMS removal jack.

Allows the user to easily sample soil gas

vapours at shallow depths for preliminary

testing and is also excellent for shallow

gas vapour sampling in soft, easily

penetrable soils.

> Samples soils to depths of 3.66m

(depending on soil conditions).

> Material: stainless steel.

> Includes: GVP base section, liner rod, GVP

hamper adapter, 3' GVP extension with liner

rod, 10" cross handle, GVP barbed adapter.

A survey tool for collection of discrete soil

vapour samples below the ground surface,

usually at discrete depths.

> Materials: 300 series stainless steel

(sampler), 400 series stainless steel (tip).

> Includes: Barbed insert, outer sleeve,

inner nut, bottom nut, vapour inlet shaft,

and screen.

Used for long-term soil gas monitoring,

groundwater sampling, vapour extraction

monitoring, and as a pressure measurement

point in vacuum testing.

> Materials: Steel implant drive end, stainless

steel gas vapour implant, stainless steel

dummy tip.

> Includes: 6" gas vapour implant, 6" GVP

implant drive end, and dedicated dummy tip.

Used for detecting hydrocarbon spills,

underground storage tank and pipe leaks,

landfi ll contamination and hazardous

waste sites.

> Material: 300 series stainless steel.

> Includes: Dedicated GVP top and

fl uropolymer umbrella.

Original Gas Vapour Probe

AMS Dedicated Gas Vapour Tip

Install this tip as a long-term sampling point or leave it in the ground as an expendable point

AMS Retract-A-Tip

Designed to be driven into the soil and opened for sample extraction

AMS 6" Gas Vapour Implant Drive Kit

SALES

$

SALES

$

SOIL GAS SAMPLING

SALES

$

SALES

$

AMS Soil Gas Sampling

AMS has been a leader in soil gas sampling technologies since the development of the ‘original’ AMS gas vapour probe.

Applications:



52

Water & Soil

53SALESSALESSALES

SALESSALESSALES

SALESSALESSALES

SALESSALESSALES

Save time in the fi eld and work smarter

by using disposable bailers. Disposable

bailers eliminate fi eld cleaning and cross

contamination.

> Available in weighted and non weighted.

> Include an improved top so they fi ll and

empty faster than any other bailer on

the market.

Tubing for use with groundwater sampling systems. Low and high density polyethylene available. Tubing is supplied bagged in plastic to ensure no cross contamination.

Tubing for use with groundwater sampling systems. Silicon disposable tubing is supplied bagged in plastic to ensure no cross contamination and is available in lengths of 15m or less.

This range of disposable syringes and

fi lters are the simple way to sample

for metals.

> Luer lock fi ttings.

> No fi eld decon required.

Easy to install and operate, the

disposable bladders and push-in

tubing can be replaced in seconds.

Air-Met has a range of replacement

disposable bladders to suit

Geotech and QED bladder pumps.

Replacement bladders are sold in

packs of 10 or 12.

The Waterra Surge Block is an excellent

well development tool. It simply press

fi ts over the body of the Standard Flow or

High Flow foot valve (D-25 or D-32).

> Waterra surge block for D25 50mm bore.

> Waterra surge block for D32 50mm bore.

Used to reduce incidence of moisture entering the sensor and the lamp of the PID.

0.45μm pore size RAE water trap fi lters are available at Air-Met Scientifi c as singles or in packs of 10.

0.45 micron disposable in-line 700cm2 eff ective fi ltration area.

The Standard Flow Foot Valves System is best used in wells of 1" to 2" inside diameter. This system is suitable for a variety of sampling environments.

Air-Met Scientifi c stocks a wide range of

calibration & decontamination solutions.

Call Air-Met Scientifi c today for a more

comprehensive list.

Calibration solutions include:

> pH4 and pH7 (500mL).

> ORP Solution A & B (250mL).

> Conductivity Standard (500mL).

> Salinity Standard (500mL).

> Oxygen Probe Service Kit Sodium Sulphate

Zero DO (50g) Turbidity Standard (500mL).

> Decontamination solutions are available in

1L, 5L and 20L high density polyethylene

containers.

Disposable textured non-slip grip,

nitrile powder free rubber gloves.

The Stericup vacuum fi ltration system

combines a Steritop Filter Unit with a

receiver fl ask for processing and storing

volumes from 150mL–1L.

Its new no tip/easy grip fl ask design and

compact profi le improve stability during

fi ltration, making gripping the receiver easier,

and Filter Units ideal for use in laminar fl ow

hoods.

Bailers & Bailer Twine Polyethylene Disposable Tubing Silicon Disposable Tubing

Syringes & Filters

Disposable Bladders

Surge Blocks

PID Filters

In-Line Filters 0.45 micron

Foot Valves

Stericup Filter Units

Calibration & Decontamination Solutions

Nitrile Powder Free Gloves

CONSUMABLESAir-Met Scientifi c stocks an extensive range of environmental consumables. If you need assistance

with product selection, or other products not illustrated in this catalogue, please contact you local

Air-Met Scientifi c offi ce. For gas, please refer to the gas detection section of this catalogue.

sposable plastic ation 15m


Sales 1800 000 744

Rental 1300 137 067

www.airmet.com.au

0074 AIRMET CATALOGUE V13 SCREEN - Ferret.com.au · MX6 iBrid Multi-gas Monitor DATALOGGING SERVICE...

Documents

Transcript of 0074 AIRMET CATALOGUE V13 SCREEN - Ferret.com.au · MX6 iBrid Multi-gas Monitor DATALOGGING SERVICE...