0 32:(5 %$&.3/$1( )(0$/( &211(&725 )25 &3&, $33/,&$7,216 326,7,21 · price. Limitation of...
2
3M TM POWER BACKPLANE FEMALE CONNECTOR FOR CPCI APPLICATIONS, 47 POSITION 3M TM ELECTRONICS MATERIALS SOLUTIONS DIVISION INTERCONNECT SOLUTIONS http://www.3mconnectors.com 3M IS A TRADEMARK OF 3M COMPANY. FOR TECHNICAL, SALES OR ORDERING INFORMATION CALL 800-225-5373 NOTES MATERIAL: HOUSING: GLASS FILLED POYESTER (PBT) CONTACT: COPPER ALLOY, GOLD PLATING 1. PLATING: -ES: FINISH: 0.76um MIN Au UNDERCOAT: 1.27um MIN Ni -G: FINISH: 0.25um MIN Au UNDERCOAT: 1.27um MIN Ni -DA: FINISH: 0.08um MIN Au UNDERCOAT: 1.27um MIN Ni 2. IN THE EVENT OF CONFLICT BETWEEN THIS DATA AND THAT CONTAINED IN THE PRODUCT SPECIFICATION, THE PRODUCT SPECIFICATION TAKES PRECEDENT. 3. 4. FOR MATING PRODUCT USE: 3P01-200X-XX CPCI POWER RIGHT ANGLE MALE CONNECTOR 47 POS. 5. ELECTRICAL FEATURES: INSULATION RESISTANCE - 10 OHMS INITIAL CONTACT RESISTANCE: POWER CONTACT --------- 0.7 MILLIOHMS MAX SIGNAL CONTACT -------- 4.0 MILLIOHMS MAX VOLTAGE PROOF: POWER 1 THRU 20 ------- 1500 VRMS POWER 45,46,47 -------- 3000 VRMS POWER 21 THRU 44 ------ 1000 VRMS CURRENT RATING: DC OUTPUT POWER 1 THRU 20 -- 16 AMPS INPUT POWER 45,46,47 ------- 23 AMPS SIZE 22 SIGNAL CONTACTS ---- 2 AMPS MINIMUM CREEPAGE DISTANCE [MM] POWER 47 TO 45 -------- 3.2 POWER 46 TO 45 -------- 3.2 POWER 47 TO SIGNAL ---- 6.4 POWER 46 TO SIGNAL ---- 6.4 POWER 47 TO 46 -------- 2.5 POWER 45 TO SIGNAL ---- 2.0 ENVIRONMENTAL: TEMPERATURE RATING: -55 TO +125C ELECTRICAL CHARACTERISTICS: DIMENSIONS: MM PART NUMBER PART DESCRIPTION TAIL TYPE 3P02-2001-XX PRESS-FIT 3P02-2002-XX SOLDER TAIL 12.50 80.00 18.70 93.65 47X 4.50 8.90 2.70 3.90 .20 4.20 RECOMMENDED HOLE PATTERN (COMPONENT SIDE OF BOARD SHOWN) PCB THICKNESS: 3.20 MINIMUM 9X 4.20 .05 2.12 .05 4.10 .05 2.13 .05 4.25 .05 2.70 .05 27.60 .05 .20 .05 32.65 .05 37.70 .05 7X 2.70 .05 88.00 .10 44.00 .10 23X 1.60 +.09 -.06 2X 3.20 .08 24X 1.00 +.09 -.06 1 2 3 4 5 6 7 8 8 7 6 5 4 3 2 1 A B C D D C B A OF SHT MODEL SIZE DET. LISTS CAGE NUMBER DRAWING NO. REV. TITLE 3M COPYRIGHT C 3M Center St. Paul, MN 55144 CHKD DATE APPVL DATE DRFT DATE MFG DATE CHKD DRFT REV ECO ISSUE DATE AND DESCRIPTION DRAWING NUMBER REVISION ACCESS CODES DESIGN REFERENCE NEXT ASSEMBLY DIVISION DIVISION CODE TOLERANCES EXCEPT AS NOTED DO NOT SCALE DRAWING SCALE MILLIMETERS INCHES .0000 .000 .00 .0 0 .0 .00 .000 ANGLES THIRD ANGLE PROJECTION INTERPRET PER ASME Y14.5 - 2009 MAX SURFACE ROUGHNESS ALL SURFACES MARKED ONLY NO YES This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved. .100 .20 .3 2 3P02-200X-XX CPCI POWER BACKPLANE, FEMALE CONNECTOR 2 1 78-5100-2370-4 C C 78-5100-2370-4 cPCI CASTIGLIONE DEC 04,2014 EMSD 2017 T. SUNIGA DEC 04,2014 DEC 04,2014 REDRAWN IN NX & ADD MIN PCB THICKNESS AUG 25,2016 ADD WARRANTY INFO C 57812 AUG 25,2016 JNC TS REGULATORY INFORMATION: VISIT 3M.com/regs OR CONTACT YOUR 3M REPRESENTATIVE TO FIND THE RoHS COMPLIANCE STATUS OF THE 3M PART YOU ARE INTERESTED IN. Imaged: C.4 Central Standard Time8/1/2017UTC Offset 28 29 27 47 46 43 45 44 42 37 38 40 41 39 36 34 35 31 32 33 30 25 26 23 24 21 20 19 16 15 18 17 14 13 10 12 11 9 8 7 4 6 5 3 2 1 22
Transcript of 0 32:(5 %$&.3/$1( )(0$/( &211(&725 )25 &3&, $33/,&$7,216 326,7,21 · price. Limitation of...
3MTM POWER BACKPLANE FEMALE CONNECTOR FOR CPCI APPLICATIONS, 47 POSITION
3MTM ELECTRONICS MATERIALS SOLUTIONS DIVISION INTERCONNECT SOLUTIONS http://www.3mconnectors.com
3M IS A TRADEMARK OF 3M COMPANY.FOR TECHNICAL, SALES OR ORDERINGINFORMATION CALL 800-225-5373
NOTES
MATERIAL: HOUSING: GLASS FILLED POYESTER (PBT) CONTACT: COPPER ALLOY, GOLD PLATING
1.
PLATING:-ES: FINISH: 0.76um MIN Au UNDERCOAT: 1.27um MIN Ni
-G: FINISH: 0.25um MIN Au UNDERCOAT: 1.27um MIN Ni -DA: FINISH: 0.08um MIN Au UNDERCOAT: 1.27um MIN Ni
2.
IN THE EVENT OF CONFLICTBETWEEN THIS DATA AND THATCONTAINED IN THE PRODUCTSPECIFICATION, THE PRODUCTSPECIFICATION TAKES PRECEDENT.
3.
4.
FOR MATING PRODUCT USE:3P01-200X-XX CPCI POWER RIGHTANGLE MALE CONNECTOR 47 POS.
5.
ELECTRICAL FEATURES: INSULATION RESISTANCE - 10 OHMS
INITIAL CONTACT RESISTANCE: POWER CONTACT --------- 0.7 MILLIOHMS MAX SIGNAL CONTACT -------- 4.0 MILLIOHMS MAX
VOLTAGE PROOF: POWER 1 THRU 20 ------- 1500 VRMS POWER 45,46,47 -------- 3000 VRMS POWER 21 THRU 44 ------ 1000 VRMS
CURRENT RATING: DC OUTPUT POWER 1 THRU 20 -- 16 AMPS INPUT POWER 45,46,47 ------- 23 AMPS SIZE 22 SIGNAL CONTACTS ---- 2 AMPS MINIMUM CREEPAGE DISTANCE [MM] POWER 47 TO 45 -------- 3.2 POWER 46 TO 45 -------- 3.2 POWER 47 TO SIGNAL ---- 6.4 POWER 46 TO SIGNAL ---- 6.4 POWER 47 TO 46 -------- 2.5 POWER 45 TO SIGNAL ---- 2.0
ENVIRONMENTAL: TEMPERATURE RATING: -55 TO +125C
ELECTRICAL CHARACTERISTICS:
DIMENSIONS: MM
PART NUMBERPART DESCRIPTION TAIL TYPE
3P02-2001-XX PRESS-FIT3P02-2002-XX SOLDER TAIL
12.50
80.00
18.70
93.65
47X 4.50
8.90
2.70
3.90
.204.20
RECOMMENDED HOLE PATTERN(COMPONENT SIDE OF BOARD SHOWN)
PCB THICKNESS: 3.20 MINIMUM
9X 4.20 .05
2.12 .05
4.10 .052.13 .05
4.25 .05
2.70 .05
27.60 .05
.20 .05
32.65 .05
37.70 .05
7X 2.70 .05
88.00 .10
44.00 .10
23X 1.60 +.09-.06
2X 3.20 .08
24X 1.00 +.09-.06
12345678
8 7 6 5 4 3 2 1
A
B
C
D D
C
B
A
OFSHTMODEL
SIZE
DET.LISTS
CAGENUMBER
DRAWING NO. REV.
TITLE
3M COPYRIGHTC3M Center
St. Paul,
MN 55144
CHKD DATE APPVL DATE
DRFT DATE MFG DATE
CHKDDRFTREV ECO ISSUE DATE AND DESCRIPTION
DR
AW
ING
NU
MB
ER
RE
VIS
ION
ACCESSCODES
DESIGN REFERENCE NEXT ASSEMBLY
DIVISION DIVISION CODE
TOLERANCESEXCEPT AS
NOTED
DO NOTSCALE
DRAWING
SCALE
MILLIMETERS
INCHES
.0000
.000
.00
.0
0 .0 .00 .000
ANGLES
THIRD ANGLE PROJECTION
INTERPRET PERASME Y14.5 - 2009
MAX SURFACE ROUGHNESS
ALL SURFACES
MARKED ONLY NOYES
This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved.
.100
.20
.32
3P02-200X-XX CPCIPOWER BACKPLANE,FEMALE CONNECTOR
21
78
-51
00
-23
70
-4C
C78-5100-2370-4cPCI
CASTIGLIONE DEC 04,2014
EMSD2017
T. SUNIGA DEC 04,2014
DEC 04,2014 REDRAWNIN NX & ADD MIN PCBTHICKNESS
AUG 25,2016 ADDWARRANTY INFO
C 57812 AUG 25,2016 JNC TS
REGULATORY INFORMATION:VISIT 3M.com/regs OR CONTACTYOUR 3M REPRESENTATIVE TO FINDTHE RoHS COMPLIANCE STATUS OFTHE 3M PART YOU ARE INTERESTEDIN.
Imaged: C
.4 C
en
tra
l S
tandard
Tim
e8/1
/2017U
TC
Offset
28
29
27
47
46
43
45
44
42
37
38
40
41
39 36
34
35
31
32
33 30
25
26 23
24 21
20
19
16
15
18
17
14
13
1012
11 9
8
7
46
5 3
2
1
22
3MTM POWER BACKPLANE FEMALE CONNECTOR FOR CPCI APPLICATIONS, 47 POSITION
12345678
8 7 6 5 4 3 2 1
A
B
C
D D
C
B
A
OFSHTMODEL
SIZE
DET.LISTS
CAGENUMBER
DRAWING NO. REV.
TITLE
3M COPYRIGHTC3M Center
St. Paul,
MN 55144
CHKD DATE APPVL DATE
DRFT DATE MFG DATE
CHKDDRFTREV ECO ISSUE DATE AND DESCRIPTION
DR
AW
ING
NU
MB
ER
RE
VIS
ION
ACCESSCODES
DESIGN REFERENCE NEXT ASSEMBLY
DIVISION DIVISION CODE
TOLERANCESEXCEPT AS
NOTED
DO NOTSCALE
DRAWING
SCALE
MILLIMETERS
INCHES
.0000
.000
.00
.0
0 .0 .00 .000
ANGLES
THIRD ANGLE PROJECTION
INTERPRET PERASME Y14.5 - 2009
MAX SURFACE ROUGHNESS
ALL SURFACES
MARKED ONLY NOYES
This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved.
.100
.20
.32
3P02-200X-XX CPCIPOWER BACKPLANE,FEMALE CONNECTOR
22
78
-51
00
-23
70
-4C
C78-5100-2370-4cPCI
CASTIGLIONE DEC 04,2014
EMSD2017
T. SUNIGA DEC 04,2014
DEC 04,2014 REDRAWNIN NX & ADD MIN PCBTHICKNESS
AUG 25,2016 ADDWARRANTY INFO
C 57812 AUG 25,2016 JNC TS
Regulatory: For regulatory information about this product, visit 3M.com/regsor contact your 3M representative.
Technical Information: The technical information, recommendations and otherstatements contained in this document are based upon tests or experience that3M believes are reliable, but the accuracy or completeness of such informationis not guaranteed.
Product Use: Many factors beyond 3M's control and uniquely within user's controlcan affect the use and performance of a 3M product in a particular application.Given the variety of factors that can affect the use and performance of a3M product, user is solely responsible for evaluating the 3M product anddetermining whether it is fit for a particular purpose and suitable for user'smethod of application.
Warranty, Limited Remedy, and Disclaimer: Unless an additional warranty isspecifically stated on the applicable 3M product packaging or product literature,3M warrants that each 3M product meets the applicable 3M product specification atthe time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS,EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY ORCONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIEDWARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OR TRADE.If the 3M product does not conform to this warranty, then the sole and exclusiveremedy is, at 3M's option, replacement of the 3M product or refund of the purchaseprice.
Limitation of Liability: Except where prohibited by law, 3M will not be liable forany loss or damage arising from the 3M product, whether direct, indirect, special,incidental or consequential, regardless of the legal theory asserted, includingwarranty, contract, negligence or strict liability.
3M Electronics Materials Solutions Division6801 River Place Blvd.Austin, TX 78726-9000 1-800-225-5373www.3M.com/interconnect
Imaged: C
.4 C
en
tra
l S
tandard
Tim
e8/1
/2017U
TC
Offset
![CV (N.E.Labrou) currentinspired.aua.gr/biotechnology/dat/labrou.pdf · 3uri 'u 1 ( /deurx 1$0( 1,.2/$26 ( /$%528 326,7,21 7,7/( 3urihvvru lq (q]\ph 7hfkqrorj\ uhvhdufk whdfklqj 'luhfwru](https://static.fdocuments.net/doc/165x107/5fcedb3bfa446b4667779da5/cv-nelabrou-3uri-u-1-deurx-10-1226-528-326721-77-3urihvvru.jpg)
![&20081,7< &211(&7,216 ® ¨ ¡ x v x v · h v o ] ( ] £ « æ ¢ « ¡ ¢ &20081,7< &211(&7,216 ® ¨ ¡](https://static.fdocuments.net/doc/165x107/5f395406a3cf730b7b4c3b62/200817-2117216-x-v-x-v-h-v-o-.jpg)
