باشــخلأا WOOD PAINTS Paints - midoco.com PDFS/0543 Wood Product Catalogue... · WOOD...

المجموعة الدولية للدهانات الحديثة ) ميدو( دهانات ميدو لألخشاب1

دهاناتاألخــشاب

أطلق لخيالك العنان

WOOD Paints

Unleash yoUr ImagInatIon

WO

OD

PAI

NTS

ب

شاخ

األت

اناه

د

MIDO HEADQUARTERS :new Borg El-arab city,

2nd industrial Zone alexandria, Egypt.

tel.: +203 4593 555Fax: +203 4592 655

[email protected]@midoco.com

PHAROS FACTORY : new Borg El-arab city,

2nd industrial Zone alexandria, Egypt.

tel.: +203 4593 555Fax: +203 4592 655

EURO FACTORY :new Borg El-arab city,

4th industrial Zone alexandria, Egypt.

tel.: +203 459 5981Fax: +203 459 5980

ENDMOUN FACTORY :new Borg El-arab city,


tel.: +203 459 5981Fax: +203 459 5980

NEW PLAST FACTORY :new Borg El-arab city,


tel.: +203 459 5981Fax: +203 459 5980

ALEXANDRIA BRANCH:314 El-Kodaa’ Buildings,

smouha, alex, Egypt.tel.: +203 421 0316 / 7

Fax: +203 421 0315

www.midoco.com

1 mido Wood Paints International group of modern Coatings (mIDo)

Contents

2mido Wood Paintswww.midoco.com

• Wood stains 03

• Wood insulators 07

• Wood sealers 11

• Wood Varnishes 19

• Wood Fillers and surfacers 33

• Wood Decorative Paints 39

• Wood Glue 43

Wood stAins

sofa stain 5


Application Method:

dilute the stain with thinner, alcohol or water as following:• 5 – 10 ml stain : 100 ml (thinner, alcohol or water). •spray Viscosity: 10 – 12 seconds using Ford Cup no. 4 at 25º C.•spray using spray gun: nozzle diameter (1.2 – 1.4 mm); air pressure (3 – 4 bar) or

using a piece of cotton.•number of Coats: 2 coats or depending on the desired color.

sofA stAinDescription:

sofa stain is a high quality stain, formulated from high-quality dyes which can be diluted with water and thinner. it is very effective in coloring furniture and wood works as it emphasizes the natural beauty of wood.

Technical data:

20 colorsColor

organic dyes – special resins – solvents – additives.Raw Materials

air temperature ( 20º C).•surface Drying: 2 – 3 minutes.•Complete Drying: 5 minutes.

Drying time

5 – 10 ml stain : 100 ml ( thinner, alcohol or water )Mixing Ratio

Surface Preparation:• Ensure that the surface to be painted

is free from dust, grease and other contaminations.

• For previously painted surfaces, all loose paints must be thoroughly removed to ensure the paint adhesion.

Recommended Uses:specially formulated to color wood

surfaces and furniture. Shelf Life: 2 years from the date of production, provided storing in proper conditions at 25º C and 65% of relative humidity.Packaging: 250 ml – 1liter

Wood insUlAtors

sofa insulator (Polyurethane) 9


Description:

sofa Polyurethane insulator (clear) is used to prepare wood surfaces before spraying polyester paints. it is especially designed to insulate oils excreted by the wood pores.

Technical data:

12 seconds at 25º C by Ford Cup no. 4.Viscosity

ClearColor

1 insulator : 1 Hardener.Mixing Ratio by Volume

4 – 5 hours at 25º C.Clotting time

air temperature (25º C).•surface Drying: 20 – 30 minutes.•Complete Drying: 2 hours.

Drying time

9 – 12 m2 / kg depending on the surface and film thickness.Coverage Rate

Recommended Uses:specially formulated to paint wood which is known to excrete different types of oils.

Shelf Life: 2 years for the insulator and one year for

the hardener from the date of production, provided storing in proper conditions at 25º C and 65% of relative humidity.

Packaging: 1 liter of insulator – 1 liter of Hardener.

Application Method:

•spray using spray gun: nozzle diameter (1.5 – 1.8 mm); air pressure (3 – 4 bar) or using a piece of cotton.

•surface can be painted with polyester paint after 2 – 3 hours of painting the insulator, and the insulator can be sanded before repainting polyester paint.

• insulator must be sanded in case of drying more than 16 hours.

sofA insUlAtor (POlyUREtHanE)

• Nitrocellulose Sealer Vniwood sealer 13 modern touch sealer 14 nova sealer 15

• Polyester Sealer Jet sealer 17

• Polyurethane Sealer 2K Polyurethane sealer 18

Wood seAlers


Description:

Vniwood sealer is a high-build material to fill pores in wood surfaces. this product is especially designed to prepare wood surfaces before using varnish and to produce a smooth, hard, seal coat without any influence on natural wood grain. it boasts easy sanding and superior adhesion without any effect on the wood color.

Technical data:

Clear – dark. Color

1 ± 0.05 gm. /cm3. specific Gravity

32000 - 82000 centipoise / 25º C. Viscosity

•surface Dry: 8 minutes.•Complete Dry: 1.5 hour.

Drying time

6 – 8 m2.Coverage Rate

120 – 200 micron.Film thickness

ordinary Duco thinnerDilution

Shelf Life: 2 years from the date of production, provided storing in proper conditions at 25º C and 65% of relative humidity.

Packaging: 1 kg – 4 kg – 10 kg – 15 kg.

Application Method:

•sand the surface well.•Dilute sealer with ordinary Duco thinner till obtaining the desired viscosity. •apply using spray gun or a piece of cotton.•spray the first coat, and allow it to dry for about 5 minutes.•spray the second coat and allow it to dry well (35 – 45 minutes). then, sand it with

sandpaper no. 320, to get a smooth coat ready for varnish application.

VniWood seAler


Application Method:

•sand the surface well.•Dilute sealer with ordinary Duco thinner till obtaining the desired viscosity. •apply using spray gun or a tpiece of cotton.•spray the first coat, and allow it to dry for about 5 minutes.•spray the second coat and allow it to dry well (35 – 45 minutes). then, sand it with

sandpaper no. 320, to get a smooth coat ready for varnish application.

Description:

Modern touch sealer is a high-build material formulated from nitrocellulose to fill pores in wood surfaces. this product is especially designed to produces a smooth, hard, seal coat as a foundation before using Duco varnish without any influence on natural wood grain. it is characterized by high filling, easy sanding, and superior adhesion without any effect onthe wood color.

Technical data:

Clear – darkColor

1 ± 0.05 gm./cm3.specific Gravity

80000 : 120000 centipoise / 25º C. Viscosity


Drying time



Ordinary Duco thinner.Dilution


Packaging: 4.25 kg – 10 kg – 15 kg.

modern toUCh seAler


Description:

nova sealer is a high-build material formulated from nitrocellulose to fill pores in wood surfaces. this product is especially designed to prepare the wood surfaces before using Duco varnish, producing a smooth, hard, seal coat without any influence on natural wood grain. it is characterized by easy sanding and superior adhesion without any effect on thewood color.

Technical data:

Clear – darkColor



58 ± 2 % solid Content



ordinary Duco thinner.Dilution


Drying time

Recommended Use: specially formulated to be used on all types of furniture to be sprayed with Duco varnish, and can be used on all types of veneer as a surfacer to seal pores.


Packaging: 4.25 kg – 10 kg – 15 kg.

Application Method:

•sand the surface well.

•Dilute sealer with ordinary Duco thinner till obtaining the desired viscosity.

•spray the first coat, and allow it to dry for about 10 minutes.

•spray the second coat and allow it to dry well. then, sand it with sandpaper no. 320.

•spray the last coat, so the wood work becomes ready for varnish application.

noVA seAler


Description:

Jet sealer is a high-build clear material formulated from polyester to fill pores in wood surfaces. this product produces a smooth, hard, seal coat as a foundation before using Duco varnish without any influence on natural wood grain. it boasts maximum filling, easysanding and superior adhesion.

Technical data:

ClearColor




Polyester thinner (25 – 30 %).Dilution

•surface Dry: 2 hours.•Complete Dry: 9 hours.

Drying time

Application Method:

•add 2 – 3 % auxiliary agent to the sealer, and then stir well. add Hardener at 2 – 3 %

and then stir well again.

•Dilute polyester sealer with special thinner (25 – 30 %), taking into account that run time

is 20 – 30 minutes from the beginning of adding the hardener.

•spray the first coat, allow it to dry, and sand it.

•spray the second coat if necessary.

Recommended Use: specially formulated to be used on all types of furniture to be sprayed with Duco varnish, and can be used on all types of veneer as a surfacer to seal pores.


Packaging:

• 1 kg sealer – 18 gm. auxiliary – 18 gm. Hardener.



Jet seAler


Description:

Polyurethane sealer 2K is a high-build clear material formulated from polyurethane two components to fill pores in wood surfaces. this product produces a smooth, hard, seal coat as a foundation before using Duco varnish without any influence on natural wood grain. it boasts water, scrubbing and marine condition resistance, easy sanding, andsuperior adhesion without any effect on the wood color.

Technical data:

clearColor

smooth and softFinish

40 ± 2 %. solid Content by Volume

0.99 kg/liter (mixed) ± 0.5 kg/literspecific Viscosity

120 seconds / Ford Cup # 4 / 25º C.Viscosity

10 m2 /liter.Coverage Rate

40 micronFilm thickness

5 minutes.Respraying time

polyurethane thinner 20 – 25 % (depending on the application method).

Dilution

2 polyurethane sealer : 1 Hardener : 20 – 25 % thinner.Mixing Ratio

•surface Dry: 2 – 3 hours.•Complete Dry to sanding: 5 - 6 hours.

Drying time

Recommended Use:specially formulated to be used on wood surfaces for all purposes, as it boasts high filling and easy sanding.

Shelf Life: 18 months from the date of production, provided storing in proper conditions at 25º C and 65% of relative humidity.

Packaging: 5 kg – 20 kg

Application Method:

• First, sand the surface well.

•Mix the sealer with hardener at a rate of 2 for sealer : 1 for hardener

•Dilute it with Duco thinner at a rate of 20 – 25 %

•spray 2 coats.

•sand the surface with sandpaper no. 320.

PolyUrethAne seAler 2K

• Alkyd Varnish Clear Coat Varnish 21 Clear Coat Varnish (el shagara) 22 lux Varnish 23 mido star lux Varnish 24

• Nitrocellulose Varnish (Duco) Vniwood Varnish 25 Jet Varnish 26 soft matt Varnish 27 soft touch Varnish 28 mido ducoVarnish 29

• Polyurethane Varnish Polyurethane Varnish 1:1 31 Polyurethane Varnish 2:1 32

Wood VArnishes


Recommended Use:specially formulated to be used in painting wood works, including kitchens, furniture and boats.

Shelf Life: 2 years from the date of production, provided storing in proper conditions at 25ºC and 65% of relative humidity.

Packaging: 1 liter.

Description:

it is a modified, clear alkyd varnish. it boasts superior gloss, high hardness, adhesion, and supreme resistance to weather conditionsand home chemicals (alcohol, grease, and oils….etc). it is used to paint wood works, including kitchens, furniture and boats.

Technical data:

high glossFinish

5 – 5.5 minutes / Ford Cup # 4 / 25º C.Viscosity

0.91 ± 0.02 %. Density

90 degree.Gloss

50 – 60 minutes at 25º C. Drying time

after 16 – 18 hours of painting the first coat.Repainting time

mineral or vegetarian oil – benzene. Dilution

Application Method:

•apply Vniwood sealer. after drying, sand the sealer with Duco sandpaper P 320.

•Repaint Vniwood sealer multiple times to get a polished surface.

•Dilute the varnish with mineral or vegetarian oil by 5 – 10 % in case of using the brush

or benzene in case of spraying with the gun.

• it can be repainted after 16 – 18 hours of painting the first coat.

CleAr CoAt VArnish



Shelf Life: 2 years from the date of production, provided storing in proper conditions at 25ºC and 65% of relative humidity.

Packaging: 925 gm. – 3 kg.

Description:

it is a polyurethane varnish, used to paint wood works, including kitchens, furniture and boats. it boasts superior gloss, high hardness, adhesion, and supreme resistance to homechemicals (alcohol, grease, and oils ….etc).

Technical data:

clear coat - high glossFinish

5 – 5.5 minutes / Ford Cup #4 / 25º CViscosity

0.91 ± 0.02 %. Density

90 degree.Gloss



mineral or vegetarian oil – benzeneDilution

Application Method:

•apply Vniwood sealer. after drying, sand the sealer with Duco sandpaper P320.

•Repaint Vniwood sealer multiple times to get a polished surface.

•Dilute the varnish with mineral or vegetarian oil by 5 – 10 % in case of using the brush

or benzene in case of spraying with the gun.

•Clear Coat varnish (El shagara) can be repainted after 16 –18 hours of painting the first

coat.

CleAr CoAt VArnish (El sHaGaRa)





Application Method:

•apply Vniwood sealer. after drying, sand the sealer with Duco sandpaper P320.•Repaint Vniwood sealer multiple times to get a polished surface. •Dilute the varnish with mineral or vegetarian oil by 5 – 10 % in case of using the brush

or benzene in case of spraying with the gun.• lux varnish can be repainted after 16 – 18 hours of painting the first coat.

Description:

lux Varnish is a modified, clear alkyd varnish. it is used to paint wood works, including kitchens, furniture and boats. it boasts superior gloss, high hardness, adhesion, and supreme resistance to home chemicals (alcohol, grease, and oils ….etc) and weatherconditions.

Technical data:

high gloss. Finish

4 – 4.5 minutes / Ford Cup # 4 / 25º C.Viscosity

0.91 ± 0.02 %. Density

at least 85 degree.Gloss

mineral or vegetarian oil – benzeneDilution



lUx VArnish





Description:

Mido star lux Varnish is an economical, clear alkyd varnish. it is used to paint wood works, including kitchens, furniture and boats. it boasts superior gloss, fast drying, excellenthardness, easy application and maximum resistance to weather conditions.

Technical data:

high glossFinish

6500 – 7000 centipoise. Viscosity

0.88 ± 0.02 %. Density

at least 85 degreeGloss

mineral or vegetarian oil – benzene. Dilution

•surface Drying: 100 – 120 minutes at 25º C.•Complete Drying: 3 – 4 hours at 25º C.

Drying time


Application Method:

•apply Vniwood sealer. after drying, sand the sealer with Duco sandpaper P320.•Repaint Vniwood sealer multiple times to get a polished surface. •Dilute the varnish with mineral or vegetarian oil by 15 – 20 % in case of using the brush

or benzene in case of spraying with the gun.•Mido star lux varnish can be repainted after 16 – 18 hours of painting the first coat.

mido stAr lUx VArnish


Application Method:

•sand the surface well.•spray 2 coats of Vniwood sealer, and then one coat of Jet sealer. sand the surface

well after complete drying.•apply sofa stain.•Dilute Vniwood Varnish with a suitable Duco thinner to get suitable spraying viscosity.•apply it using spraying gun diameter nozzle (1.5 – 1.8) mm.•spray 2 coats of the varnish, leaving 5 – 10 minutes flash-off time between coats.

Description:

Vniwood Varnish is a high-quality nitrocellulose varnish, based on specially-formulated alkyd resins. this product boasts high transparence, excellent gloss, fast drying, superior hardness and scratch resistance.

Technical data:

1 ± 0.1 gm. / cm3.Density

2000 – 3000 centipoise / 25º C.Viscosity

•surface Drying: 15 minutes at 25º C.•Complete Drying: 30 minutes at 25º C.

Drying time

glossy, semi-glossy and matt.Gloss

Proper Duco thinner.thinner

ClearFinish




VniWood VArnish


Application Method:


well after complete drying.•apply sofa stain.•Dilute Jet Varnish with a suitable Duco thinner to get suitable spraying viscosity.•apply it using spraying gun diameter nozzle (1.5 – 1.8) mm.•spray 2 coats of the varnish, leaving 5 – 10 minutes flash-off time between coats.

Recommended Use:specially formulated to be used in painting furniture, kitchens, and other wood works.


Packaging: 1/2 kg – 4 kg – 15 kg.

Description:

Jet Varnish is a high-quality nitrocellulose varnish, based on specially-formulated alkyd resins. this product boasts high transparence, excellent gloss, fast drying, superiorhardness and scratch resistance.

Technical data:

1 ± 0.1 gm. / cm3. Density



Drying time

glossy, semi-glossy and matt.Gloss

Proper Duco thinner.thinner

ClearColor

Jet VArnish


Application Method:

•Using spray gun nozzle diameter 1.5 – 1.8.

•air pressure: 3 – 4 bar.

•spray viscosity: 18 – 20 seconds using Ford Cup no. 4 at 25º C.

•Coats: 2 coats.

Description:

soft Matt Varnish is a high-quality matt nitrocellulose varnish, based on specially-formulated alkyd resins with special additives to give attractive matt finish, smooth touch and high resistance to friction and scrubbing.

Technical data:

Finish Clear

specific Gravity 0.92 kg /liter.

Viscosity 4 minutes at 25º C.

Gloss matt (5%).

Drying time•surface Drying: 15 minutes at 25º C.•Complete Drying: 30 minutes at 25º C.

Repainting time 5 minutes.

soft mAtt VArnish

Recommended Use:specially formulated to be used in painting wood and furniture to give attractive matt finish, smooth touch and high resistance to friction and scrubbing.


Packaging: 950 gm. – 3.5 kg.


Description:

soft touch Varnish is a high-quality semi-gloss nitrocellulose varnish, based on specially- formulated alkyd resins with special additives to give attractive semi-gloss finish, smoothtouch and high resistance to friction and scrubbing.

Technical data:

Finish Clear

solid Content by Weight 37 ±1 %.

specific Gravity 0.9 kg /liter.

Viscosity 4 minutes at 25º C.

Gloss semi-gloss (25 – 30%).

Drying time•surface Drying: 15 minutes at 25º C.•Complete Drying: 30 minutes at 25º C.

Repainting time 15 minutes.

Application Method:

•Using spray gun nozzle diameter 1.5 – 1.8.


•spray viscosity: 18 – 20 seconds using Ford Cup no. 4 at 25º C.

•Coats: 2 coats.

Recommended Use:specially formulated to be used in painting wood and furniture to give attractive semi-glossy finish, smooth touch and high resistance to friction and scrubbing.



soft toUCh VArnish


Recommended Use:specially formulated to be used in painting furniture, kitchens, and other wood works.


Packaging: 1 kg – 3 kg.

Description:

Mido Duco is a high-quality nitrocellulose varnish, based on specially-formulated alkyd resins. this product boasts high transparence, excellent gloss, fast drying, superiorhardness and scratch resistance.

Technical data:

ClearFinish

all colors.Color

white 1 – colors 0.96.specific Gravity



Drying time

5 minutesRepainting time Application Method:


well after complete drying.•apply sofa stain.•Dilute Mido Duco Varnish with a suitable Duco thinner to get suitable spraying viscosity.•apply it using spraying gun diameter nozzle (1.5 – 1.8) mm.•spray 2 coats of the varnish, leaving 5 – 10 minutes flash-off time between coats.

mido dUCo VArnish


Description:

Polyurethane Varnish 1:1 is a high-quality polyurethane varnish (gloss - semi-gloss – matt), based on two components of high-quality resins and special additives to give maximum performance and can be sanded after 24 hours. it boasts smooth touch, high hardness,flexibility and resistance to weathering and and scrubbing.

Technical data:

resins – solvents – special additives.Raw Materials

(at a film thickness of 50 - 60 micron / air drying 25º C.)•surface Drying: 2 hours at 25º C.•Complete Drying: 4 – 6 hours at 25º C.

Drying time

50 – 60 micron per coat.Film thickness

6 – 8 m2 / liter. Coverage Rate

1 polyurethane varnish : 1 polyurethane hardener + 25 % polyurethane thinner.

Mixing Ratio

3 - 4 hours at 25º C.available time for repainting after mixing

5 minutes between coats.Flash-off time

Recommended Use:specially formulated to be used in painting furniture, kitchens and other wood works, whether interior or exterior.



Application Method:

• the surface must be clean and free of dust, grease and oil.•sand the surface well using sandpaper no. 320.•spray new surfaces with Polyester sealer or Polyurethane sealer, and sand it with

sandpaper no. 320 to get a smooth surface. then, spray Polyurethane Varnish.•sand old surfaces with sandpaper no. 1000, and then spray the varnish.•Using spray gun nozzle diameter (1.5 – 1.8 mm), and air pressure (3 – 4 bar).•spray viscosity: 18 – 20 seconds at 25º C.•number of Coats: 2 coats.•Polish the surface after 24 hours to get smooth and attractive surface.

PolyUrethAne VArnish 1:1


Description:

Polyurethane Varnish 2:1 is a high-quality polyurethane varnish (gloss - semi-gloss – matt), based on two components of high-quality resins and special additives to give maximum performance and can be sanded after 24 hours. it boasts smooth touch, high hardness,flexibility and resistance to weathering and scrubbing.

Technical data:

resins – solvents – special additives.Raw Materials

2 polyurethane varnish : 1 polyurethane hardener + 25 % polyurethane thinner.

Mixing Ratio

3 - 4 hours at 25º C.available time for repainting after mixing

(at a film thickness of 50 - 60 micron / air drying 25 º C.)•surface Drying: 1 hour at 25º C.•Complete Drying: 24 hours at 25º C.

Drying time

55 – 70 micron per coat.Film thickness

6 – 8 m2 / liter. Coverage RateRecommended Use:specially formulated to be used in painting furniture, kitchens and other wood works, whether interior or exterior.



Application:

•Using spray gun nozzle diameter: 1.5 – 1.8 mm.


•spray viscosity: 18 – 20 seconds at 25º C.

•number of coats: 2 coats.

• Flash-off time: 5 minutes between coats.

•Polish the surface after 24 hours to get smooth and attractive surface.

Application Method:

• the surface must be clean and free of dust, grease and oil.•sand the surface well using sandpaper no. 320.•spray new surfaces with Euro Ester sealer, and sand it with sandpaper no. 320 to get a

smooth surface. then, spray Polyurethane Varnish.•sand old surfaces with sandpaper no. 1000, and then spray the varnish.

PolyUrethAne VArnish 2:1

Jet filler 1k 35

Jet surfacer 36

Polyurethane surfacer 37

Wood fillers & sUrfACers


Description:

Jet Filler 1K is a one-component fillerused to paint car panels. it is also used as a foundation on wood surfaces. it boasts maximum filling of wood pores as well as fast drying.

Technical data:

FillerFinish

all colorsColors

1.4 gm. / cm3. specific Gravity

25.000 centipoise at 25º C.Viscosity

•surface Drying: 15 minutes.•Complete Drying: 2 hours.

Drying time:

15 minutesFlash-off time

Application Method:

•Using spray gun nozzle diameter: 1.8 – 2 mm.•spraying Pressure: 3 – 4 bar.•spraying viscosity: 30 – 35 seconds using Ford Cup at 25º C.•no. of coats: 2 – 3 coats.

Recommended Use:specially formulated to be used in repainting modern cars, metal surfaces, and furniture.


Packaging: 1500 gm.

Jet filler 1K


Description:

Jet surfaceris specially formulated from nitrocellulose and resins to be used directly before the top coat to get smooth and soft surface. this product boasts easy sanding and excelling filling properties for wood and metal to give smooth surface after sanding,avoiding matt touch in the top coat.

Technical data:

MattFinish

all basic colorsColors

1.4 gm. /cm3specific Gravity

25.000 centipoise at 25º CViscosity

•surface Drying: 15 minutes.•Complete Drying: 30 minutes.

Drying time

15 minutes.Flash-off timeRecommended Use:specially formulated to be used in painting wood and metal works after putty to give smooth surface.



Application Method:

•Use the spray gun (nozzle: 1.8 – 2 mm / air pressure: 3 – 4 bar) in application after diluting paint with proper nitrocellulose thinner till attaining the desired viscosity.

Jet sUrfACer


Description:

Polyurethane surfacer 2K with hardeneris specially formulated to be used directly before the top coat to give smooth and soft surface. this product boasts excelling filling properties for wood to give smooth surface after sanding, avoiding matt touch in the top coat. thesurface becomes ready for painting 2K products.

Technical data:

MattFinish

all basic colors.Colors

1.4 gm. /cm3.specific Gravity

15.000 centipoise at 25º C.Viscosity

•surface Drying: 2 hours.•Complete Drying: 4 – 6 hours.

Drying time

5 minutes.Flash-off time Recommended Use:specially formulated to be used in painting wood after putty to get smooth surface.

Shelf Life: 1 year from the date of production, provided storing in proper conditions at 25º C and 65% of relative humidity.


Application Method:

•application tools: Use the spray gun (nozzle: 1.8 – 2 mm / air pressure: 3 – 4 bar) in application after mixingsurface with hardener at rate 2:1 and then diluting withnitrocellulose thinner till attaining the desired viscosity.

PolyUrethAne sUrfACer

hammer finish – Atlanta 2000 41

Crackle Paint 42

Wood deCorAtiVe PAints


Description:

Hammer Finish atlanta 2000 is high gloss enamel, specially formulated from alkyd resin and aluminumpaste with high-quality additives,featuring an excellent hammered pattern.

it boasts fast drying, excellent mechanical properties and supreme resistance to weathering withoutany impact on paint finish.

Technical data:

available in all colors except white.Color

1± 0.1 gm. / cm3Density

25 – 30 % (using good thinner).Dilution

•surface Drying: 20 – 25 minutes.•Complete Drying: 2 – 3 hours.

Drying time

8 – 10 cm3 / kg.Coverage Rate

85 ± 5 at 60O.GlossRecommended Use:it's an ideal paint for tools, machinery, and other industrial uses.


Packaging: 1 kg – 4 kg – 15 kg.

Application Method:

•sand the surface well.• Ensure that the surface to be painted is free from dust, grease and other contaminations.

hAmmer finish atlanta 2000


Description:

Crackle is a decorative nitrocellulose matt paint, especially formulated from high-quality resins andadditives to give special effects similar to crocodile leather in its appearance.

Application Method:

• to get the best crackle effect, you should follow these instruction:•spray duco paint (Midoduco – Jet) according to the required color.•Dilute the Crackle paint with proper duco thinner: 20 – 25%.•spraying distance: 30 – 40 cm.•Pressure: 1.5 – 2 bar.•nozzle diameter: 1.8 – 2 mm.• in case of distance less than 30 cm, you can obtain wide crackle effect.• in case of distance more than 40 cm, you can obtain narrow crackle effect.

Technical data:

12 colorsColor

1500 – 2000 centipoise. Viscosity

Using proper nitrocellulose thinner.Dilution

10 – 15 minutes.Drying time

Recommended Use:Used in painting all wood works.


Packaging: 1 kg – 4 kg.

CrACKle PAint

Jet (Clear Glue) 45

Jet (White Glue) 46

Wood GlUe


Description:

it's clear glue, manufactured from high quality materials and characterized by its perfect adhesion. it is suitable for adhering wood, papers, and cartons. it is characterized by fast dry.

Technical data:

ClearFinish

•surface Dry: 10 – 15 min.•Completely Dry: 60 min.

Drying time

Recommended Use:it is suitable for adhering wood, papers, and cartons.

Surface Preparation:surface should be clean and free of dust, grease, and oil.

Shelf Life: 1 year from the date of production in the original, tightly-sealed package.provided storing in proper conditions at 25º C and 65% of relative humidity.

Packaging: 900 gm.

Jet (CleAr GlUe)

Application Method:

•surface should be clean and free of dust, grease, and oil.•Dilute by water till getting better consistence. • the diluted glue must be used completely. •after diluting the glue with water, put a suitable amount on the surface and press well.


Description:

it's white glue, manufactured from high quality materials and characterized by its perfect adhesion. it is suitable for adhering wood, papers, and cartons. it is characterized by fast dry.

Technical data:

WhiteFinish

•surface Dry: 10 – 15 min.•Completely Dry: 60 min.

Drying time

Application Method:

•surface should be clean and free of dust, grease, and oil.•Dilute by water till getting better consistence. • the diluted glue must be used completely. •after diluting the glue with water, put a suitable amount on the surface and press well.

Jet (White GlUe)

Recommended Use:it is suitable for adhering wood, papers, and cartons.

Surface Preparation:surface should be clean and free of dust, grease, and oil.

Shelf Life: 1 year from the date of production in the original, tightly-sealed package.provided storing in proper conditions at 25º C and 65% of relative humidity.

Packaging: 900 gm.

باشــخلأا WOOD PAINTS Paints - midoco.com PDFS/0543 Wood Product Catalogue... · WOOD...

Documents

Transcript of باشــخلأا WOOD PAINTS Paints - midoco.com PDFS/0543 Wood Product Catalogue... · WOOD...