2011

END OF

FINANCIAL

SPECIALS

plumBOSS A

USTRALIA

“The Pip

e and Tube T

ool Specialis

ts”

COLLET EXPANDER

The Collet Expander is a great tool for expanding the larger sized tubes from 1 1/2” up to 10”. It is compact and easy to use. For your convenience most of the units available come with multiple sizes so you don’t have to use up storage space or money for each size you require. How to Use:1. Anneal tube2. Insert Collet Expander into annealed tube2. Insert Collet Expander into annealed tube3. Turn nut until desired socket size is formed

Available sizes:CE2 - 1 1/2”CE21/2 - 2 1/2”CE4 - 3” & 4”CE6 - 5” & 6”CE8 - 6” & 8”CE8 - 6” & 8”CE10 - 10” ONLY

Expand your Business with these COLLET EXPANDERS

Other sizes can be priced Other sizes can be priced on request. Othersizes are not subject to the special pricing of the plumBOSS AUSTRALIA End of Finan-cial Year 2011 Specials

plumBOSS EXACT-CUT

Meet the coolest, cleanest cuts in Australia - the plumBOSS exact-

CUT

The fastest, easiest, safest way to cut pipes Pipes made of steel, cast iron and other materials are usually cut with dangerous, imprecise angle grinders or heavy and unmanageable pipe cutting machines. Slow, labour-intensive manual pipe cutters are also commonly used. The innovative new plumBOSS exactCUT System essentially resolves all the problems associated with pipe cutting.

A Finished Surface Ready for InstallationplumBOSS exactCUplumBOSS exactCUT attaches to a pipe firmly. After attachment, the blade is always in the correct position auto-matically and does not need to be guided. The blade chips through the pipe rather than grinding it. This creates burr-free cut surfaces that are ready for jointing. Also, the exactCUT does not generate dust or dangerous spark-ing.Superior Work ComfortThe entire weight of a plumBOSS exactCUT rests on the pipe being cut, so using it is easy and safe, even in tight spaces. Only about a metre of working room is required. Heavy pipes need not be lifted onto a work table, but can be cut at floor level. During operation, the saw is firmly attached to the pipe and cannot work itself loose from the operator's grasp. Nor does it need to be supported or guided. Cutting small diameter pipes to size is effortless and quick on a work table, too.No Fire Hazard or Collateral DamageThe chips produced by a plumBOSS exactCUThe chips produced by a plumBOSS exactCUT saw cool quickly and fall in the immediate vicinity of the cutting site without causing damage, even to sensitive surfaces. Minimal protection of the surrounding area is therefore re-quired. The ease of use also improves work safety; no special skills or long-term training is needed to operate plumBOSS exactCUT smoothly.Versatile, Handy and QuickplumBOSS exactCUT pipe saws can cut a very wide range of sizes. Model 170 can be used to cut pipes with an outside diameter of 15–170 mm. Model 170E has the same cutting range, but is more powerful, and the rotational speed of the blade can be adjusted according to the material being sawed. Model 200 can be used for all pipes with an outside diameter of 15–200 mm, and model 360U for all pipes with an outside diameter of 75–360 mm. plumBOSS exactCUT saws are suitable for cutting all types of pipe materials. The plumBOSS exactCUT System is the fastest system on the market; for example, it takes about 35 seconds to cut a DN 100 cast iron pipe with an ExactCUExactCUT 170 using the Diamond blade. Switching blades on a PLUMBOSS exactCUT is simple and quick.

plumBOSS exactCUT 170 technical specifications:

Voltage 230/50 HzPower input 170:1010W, 170E:1200 WSpindle speed: 4000Periodic operation S3 25 %Blade diameter 140 mmArbor hole 62 mmArbor hole 62 mmWeight 5,7 kgCutting range 15 mm – 170 mmMaximum thickness Steel: 6mm

Voltage 230/50 HzPower input 1100 WSpindle speed 4000 RPMPeriodic operation S3 25%Blade diameter 140 mmArbor hole 62 mmWWeight 8.9 kgCutting range 15 mm–200 mmMaximum thickness Steel: 8 mmPlastics: 12 mm

plumBOSS exactCUT 200 technical specifications:

Voltage 230/50 HzPower input 1400 W Spindle speed 4000RPMPeriodic operation S3 25%Blade diameter 140 mmArbor hole 62 mmArbor hole 62 mmWeight 14.3 kgCutting range 75mm–360mmMaximum thickness Steel: 8mmPlastics: 25 mm

plumBOSS exactCUT 360 technical specifications:

4” threading machine

mantis band saw

Versatility and Safety in one compact unit

FIG. 1

FIG. 2

CHAIN VICE UNIT

The Mantis 180WS Band Saw is the lightest in it’s class and is safe and easy to use. The motor is equipped with protective function against overload to prevent burning. The motor is designed to stop automatically after cutting. The handle, knob and switch are all located at the front for easy operation. (Fig. 1) Replacing the saw blade is easy; just detach the front cover for easy access. (Fig. 2) Due to its large wheels the Mantis 180WS is easy to move. Specs:Specs: CUTTING CAPACITY - 90o : Round Pipe ø 180 / Square Pipe □ 150 MOTOR - Single Phase 220V (50/60Hz), Split-phase Induction motor 250W, with overload protection PULLEY SPEED (min-1) - 70 (50Hz), 84 (60Hz) BLADE DIMENSIONS - 1,625x13x0.65mm (LxWxT) OVERALL DIMENSIONS - 865x355x415mm (LxWxH) WEIGHWEIGHT - 37kg SUPPLIED WITH - 14-tooth HSS blade x1

2” threading machine

Specs: DIE HEAD - 1/2” - 2” NV-auto BSPT VOLTAGE - 220V DIES TYPE - BSPT SAFETY - Foot Switch ROTATION - Right/Left

3” threading machine

Specs: DIE HEAD - Uni-auto + manual VOLTAGE - 230V DIES TYPE - BSPT SAFETY - CE + Foot Switch

ROLL GROOVE ATTACHMENT

Specs: APPLICABLE MACHINEN50A, R50A, P50AN50A, R50A, P50A WORKING CAPACITY 1”-6” Schedule 10 1” - 3” Schedule 40 WEIGHT 14.5kg

PIPE JACKS

These 2,000 lb (907 kg) capacity pipe jacks available in three different configura-tions are the professionals choice.The High Jack range is available in a fixed or folding leg configuration and the Compact Jack comes with folding legs, making it the most compact and portable jack on the market.Convenient adjusting screw and a hardened steel locking ring are two features that make these professional pipe jacks last for many years of use. Adjusting screw gives proper working height. Outer surfaces are powder painted or zinc phosphate plated to resist corrosion. Specs: FIXED LEG FOLDING LEG FOLDING LEG HIGH JACK HIGH JACK COMPACTCAPACITY 907kg 907kg 907kg HEIGHT 715-1250mm 730-1250mm 470-925mm WEIGHT

PB-08050 FIXED LEG - HIGH JACK

PB-08051 FOLDING LEG-HIGH JACK PB-08032 FOLDING LEG - COMPACT