영문카다록 Rev 1 - · PDF fileAbout Intercoax Co.,Ltd. Since 2014, INTERCOAX CO., LTD. is...
Transcript of 영문카다록 Rev 1 - · PDF fileAbout Intercoax Co.,Ltd. Since 2014, INTERCOAX CO., LTD. is...
Product Guide High Speed & Long Distance
Ethernet and PoE Extension
Over Coax / Twisted Pair
www.intercoax.com
Introduction 02
Product Guide 04
Products
ECP-2801T / R 05Single Port Ethernet over Coax Transmitter / Receiver
ECP-2808RM / 2816RM 068 / 16 Port Ethernet over Coax Managed Receiving Switch
EUP-2808RM / 2816RM 078 / 16 Port Ethernet over UTP Managed Receiving Switch
ECP-2701 10Single Port Ethernet over Coax Transceiver
ECP-2704T 114 Port Ethernet over Coax Transmitter
ECP-2704R 124 Port Ethernet over Coax Receiver
ECP-9501T / R 13Single Port Ethernet over Coax Transmitter / Receiver
ECP-9504R 144 Port Ethernet over Coax Receiver
ECP-9508R / 9516R 158 / 16 Port Ethernet over Coax Receiver
ECP-8401T / R 16Single Port Ethernet over Coax Transmitter / Receiver
EUP-8401T / R 17Single Port Ethernet over UTP Transmitter / Receiver
ECP-8301T / R 18Single Port Ethernet over Coax Transmitter / Receiver
ECP-101T / R 19Single Port Ethernet over Coax Transmitter / Receiver
EUP-101T / R 20Single Port Ethernet over UTP Transmitter / Receiver
BTE-02 21Single Port BNC to RJ-45 Exchanger
EPR-101 / 111 22Ethernet & PoE Repeater
Applications 23
Contents
Rev 1.04
High-Speed, Long distance Ethernet and PoE Extender over Coax
Network Solution ProviderPage 01 of 26
About Intercoax Co.,Ltd.
Since 2014, INTERCOAX CO., LTD. is a leading designer and manufacturer of value-added Ethernet over Coax / Twisted Pair extenders and PoE repeaters.
With successful launch of the single port EoC (Ethernet over coax) extender, Intercoax product range have expanded to meet the needs of the explosive IP surveillance market based on the migration from analogue to IP system.
From single port Ethernet over coax solution to Ethernet & PoE overCoax and Multiport EoC managed switch, Intercoax has continued developing customer oriented products and management software for enterprise grade features and capabilities.
As one of leading developers of high quality, cost effective EoC equipment, Intercoax will continue providing complete solutions and cutting-edge technologies for customer’s satisfaction.
Network Solution Provider
High-Speed, Long distance Ethernet and PoE Extender over Coax
Page 02 of 26
Introduction
Complete range of Ethernet over Coax /Twisted Pair extenders & PoE repeaters
From single port EoC converter to multiport managed EoC switch, Intercoax offers complete range of Ethernet over Coax / Twisted Pair solution, designed to meet a variety of needs.
Cost & Time saving solution
Re-using the existing cables such as Coaxial , UTP or 2 -wire cables.
Easy & Fast installation
Analog cameras can be replaced with IP camera easy and fast way compared with pulling a new network cable.
Extended cable distance
Ethernet over Coax / Twisted Pair Solution provides long distance data & power transmission over 100 meters distance limitation of network devices.
Power over existing cable (Coax, UTP, 2 Wire)
Without pulling power cable, Intercoax devices provide power transmission feature up to 60W over existing cable.
Multi-Connection
1:N, N:1, Daisy Chain, Star, Ring, etc.
Various application
Using exclusive adapter, Intercoax devices allow to use not only coaxial cable but also, Cat.5e/6e, Cat.3, communication cable and power cable for long distance data and power transmission.
No business interruption for renovation
- Easy & fast installation without pulling new cable, destroying wall for cabling work, etc
- Minimal impact on customer operations
Data Encryption
128-bit AES encryption for secured data communication
Introduction High-Speed, Long distance Ethernet and PoE Extender over Coax
Network Solution ProviderPage 03 of 26
Product Guide High-Speed, Long distance Ethernet and PoE Extender over Coax
Network Solution Provider
* ECP models are based on BNC for coaxial cable connection.
* EUP models are based on RJ45 for UTP cable connection.
* ETP models are based on 4-Pin Terminal block for any 1 or 2 pairs of cable connection
* ( ) : Max. distance between Intercoax PoE Repeaters
* Multi-port products may have different bandwidth and power current for each port depending on number of cameras.
* Maximum distances for Data and PoE are tested with RG-6 Coaxial cable. Test result may vary depending on cable type & quality.
* Max PoE distance is tested with 7W PoE IP Camera.
Page 04 of 26
Model Product category Port EthernetMax.
Bandwidth(Mbps)
Max. DataDistance(m/RG-6)
Max. PoEDistance(m/RG-6)
Max. PoEOutput(Watt)
ECP-8301T(EUP-8301T)(ETP-8301T)
Single Port EoC Transceiver 1 10/100 80 2400 1200 60
ECP-8301R(EUP-8301R)(ETP-8301R)
Single Port EoC Transceiver 1 10/100 80 2400
ECP-8401T(EUP-8401T)(ETP-8401T)
Single Port EoC Transceiver 1 10/100 80 2400 1200 60
ECP-8401R(EUP-8401R)(ETP-8401R)
Single Port EoC Transceiver 1 10/100 80 2400
EPR-101 Single Port PoE repeater 1 10/100 100130
*(200)130
*(200)15
EPR-111 Single Port PoE repeater 1 10/100 100130
*(250)130
*(250)15
ECP-2701 Single Port EoC Transceiver 1 10/100/1000 270 2400 1200 60
ECP-2704R 4 Port EoC Receiver 4 10/100/1000 270 2400
ECP-2704T 4 Port EoC Transmitter 4 10/100/1000 270 2400 1200
1200
60 (sharing power)
ECP-9501R Single Port EoC Transceiver 1 10/100 95 1000
ECP-9504R 4 Port EoC Receiver 4 10/100 95 1000
ECP-9501T Single Port EoC Transceiver 1 10/100 95 1000 1000
1000
60
ECP-9508R 8 Port EoC Unmanaged Switch 8 10/100 180 1000
ECP-9516R 16 Port EoC Unmanaged Switch 16 10/100 360 1000
ECP-2801R(EUP-2801R)(ETP-2801R)
Single Port EoC Receiver 1 10/100 95 2400
ECP-2801T(EUP-2801T)(ETP-2801T)
Single Port EoC Transmitter 1 10/100 95 2400 1200
1200
60
ECP-2808RMEUP-2808RM
8 Port EoC Managed Switch 8 10/100/1000 540 2400
ECP-101(EUP-101)
Single Port EoC Set 1 10/100 100 600 600
ECP-2816RMEUP-2816RM
16 Port EoC Managed Switch 16 10/100/1000 1000 2400
60
-
-
-
-
-
-
-
-
-
-
1200
1200
1000
1000
1000
1200
1200
Transmission Rate / meter PoE (Watt) / meter
RG-6 CoaxRG-6 Coax56VDC/1.2A Input
200 1200 2400m600 1800
95Mbps
10
40
60
20
30W
60W
15W
10W
5W
20050 1200m800600
Dimension
Overview
ECP-2801 Series is High-Speed, long distance Ethernet & PoE extender that makes possible to transmit the IP data up to 2,400m and PoE up to 1,200m through various cables in different situations.
It is cost-effective and time saving solution to migrate existing analogsystem to IP based system since ECP-2801 supports easy installationutilizing the existing CCTV cable (Coax, UTP, 2wire)
With long distance transmission feature, the device makes to overcome100 meters distance limitation easily and reduces the construction costsignificantly compared with fiber optic configuration.
Features
• Ethernet over coax (UTP, 2 Wire) communication following IEEE1901 Standard
• Data + Power over Coax (UTP, 2-wire)
• Data distance up to 2,400m
• PoE distance up to 1,200m
• Max. 95Mbps Bandwidth
• 10/100 Full Duplex
• 128bit AES network encryption
• Supports Multi-connection (Daisy chain, Ring, Star, etc)
• PoE, PoE+, Extra PoE (Max. 60W output)
• Easy installation with Quality LED (Data & Power), Plug & Play
• LED indication for PoE Budget and power consumption of the PoE device
• Support PoE+ Input (25.5W) from PoE Switch devices – ECP-2801R Only
• Compact design
ECP-2801T / RSingle Port Ethernet over Coax Transmitter / Receiver
Network Solution Provider
High-Speed, Long distance Ethernet and PoE Extender over Coax
Performance chart
Connection Diagram
* Transmission distance may vary depending on the type and quality of cable, use of power and environmental condition.
* Distance is based on RG-6 coax cable and 7 Watt IP Camera.
Specification
Model ECP-2801T ECP-2801R
Coax
Ethernet
Ethernet
PoE (PoC)
Ethernet
EoC
Power
Interface
Transmission Rate
TransmissionDistance
LED Indication
75Ω BNC (Female) - Ethernet over Coax (B-LinX)
RJ45 - 10/100 Base-T with Auto-detect MDIX
95Mbps Full Duplex (PHY: 200Mbps)
up to 2,400 m(RG-6)
up to 1.2Km (RG-6 / 56VDC Input / 7W camera)
1 - Data(Green) / 1 - PoE(Yellow) 1 - Act(Green) / 1 - Link(Yellow)
PoE Consumption 50W / 30W / 15W / 7W (Green) -
PoE Budget 50W / 30W / 15W / 7W (Orange) -
PoE Input - 15W / 30W / 60W / B-Linx
1 - BNC Join(Green)
1 - Power On(Blue)
Input
PoE Output
Encryption
Power
128-bit AES
B-Linx or DC12V~56V PoE Switch or DC12V~56V
PoE Not SupportedPoC Only
Dimension
WeightMechanical
62.2(L) x 61.6(W) x 24(H)mm
. 77g
Operating Temp
Storage Temp
Relative Humidity
Certification
Surge Protection
Environment
Compliance
Optional Accessories
-20 ~ 60°C
-30 ~ 80°C
10% ~ 90%
FCC, CE, KC
IEC 61000-4-5 4kV(1.2 / 50us), 2kA(8 / 20us)
56VDC / 1.2A External Power Supply
IEEE802.3af(PoE), IEEE802.3at (PoE+),Extra PoE up to 60W
�T�O�P �V�I�E�W
24
ECP-2801T
ECP-2801R
61.6
5052.4
62.2
Page 05 of 26
ECP-2801R56V DC/1.2A Power Supply
NVR Network Switch
PoE
ECP-2801T ECP-2801R
PoECamera
PoE
DataCoax (UTP / 2 Wire)
EoC
PoC
ECP-2801T
PoECamera
Coax (UTP / 2 Wire)
PoE
DataEoC
PoC
Connection Diagram
PoE
Data
PoE Camera EoC
PoC ECP-2816RM
ECP-2704T
Coax
AC 100~240V
NVR Network Switch
ECP-2701
Coax
Coax
Coax
ECP-2701
ECP-2701
ECP-2701
ECP-2808RM
ECP-2816RM
ECP-2808RM / 2816RM8 / 16 Port Ethernet over Coax Managed Receiving Switch
High-Speed, Long distance Ethernet and PoE Extender over Coax
Network Solution Provider
* Multi-Port devices may have different bandwidth and power current for each port depending on number of cameras.
* Transmission distance may vary depending on the type and quality of cable, use of power and environmental condition.
* Distance is based on RG-6 coax cable and 7 Watt IP Camera.
Overview
The All-New Intercoax ECP-2808RM/2816RM are 19” rack mountable managed Long Distance Ethernet and PoE over Coax Receiving Switches.
ECP-2808RM/2816RM are available with 8 or 16 B-Linx(Coax) ports.
ECP-2808RM/2816RM are capable of connecting more than 8/16 ECP Transmitters even with Daisy-Chain connection and also support PoE powered devices such as IP cameras. Data rates up to 1Gbps areachievable, making these devices the ideal choice in new or legacy installations where existing Coax cable is re-deployed as part of an upgrade from Analog to IP cameras.
ECP-2808RM has built-in 320 Watt power supply and ECP-2816RM has built-in 640 Watt power supply. (*Dual power supply of 320w + 320wfor power shairing and redundancy) PoE up to 60W per port is available.
Browser based GUI manages all connected IEEE1901-HPAV standard devices. Furthermore, the world first innovative “Intercoax ECP Manager” software allows managing multiple of ECP-2808RM /2816RM remotely from central management office.
Features
• Total management software, “Intercoax ECP Manager Full version” included
• Friendly Graphic User Interface with EasyView can easily access and monitor multiple ECP-2808RM/2816RM
• Can configure Join & Unjoin, Changing joining password and reset power for remotely connected devices
• Real-time monitoring of power consumption for each port
• Multicast Setting with IGMP Query & Report Generator
• SNMP ready
• Port Locking for security
• Alarm LED & buzzer built-in switch and notification on ECP Manager
• Scheduled event reporting and alert reporting to designative users
• Back up & Restore of configuration
• 8/16 Port long distance EoC up to 2,400m
• PoE/ PoE+/ Extra PoE up to 60W (PoE++) per B-Linx port
• Each port has Auto Power Short Protection. When the cable is being shorted or damaged, it won’t transmit power until the cable is fixed
• B-Linx Device Detection will secure the power transmission only to B-Linx devices
• 320W / 640W Built-in Power Supply
• Built-in crosstalk cancelling technology
• B-Linx Multiple Nodes can be used (Daisy Chain, Star, Ring, Etc.) on each port
• All IEEE1901-HPAV standard EoC devices can be easily connected remotely
• 19-inch(1U) rack mountable design
• Giga-bit SFP and Copper uplink port
Dimension
ECP-2808RM
ECP-2816RM
Page 06 of 26
B-Linx Detection ON / OFFCOAX
B-Linx Detection ON / OFF
�R�E�A�R� �V�I�E�W
�T�O�P �V�I�E�W
441.5 44
330
349
PoE
Data
PoE Camera EoC
PoC EUP-2816RM
ECP-2704T
Cat.5e or Better
ECP-2701BTE-02
BTE-02
BTE-02
BTE-02
Cat.5e or Better
ECP-2701
Cat.5e or Better
ECP-2701
Cat.5e or Better
AC 100~240V
NVR Network Switch
Connection Diagram
EUP-2808RM
EUP-2816RM
EUP-2808RM / 2816RM8 / 16 Port Ethernet over UTP Managed Receiving Switch
High-Speed, Long distance Ethernet and PoE Extender over Coax
Network Solution Provider
* Multi-Port devices may have different bandwidth and power current for each port depending on number of cameras.
* Transmission distance may vary depending on the type and quality of cable, use of power and environmental condition.
* Distance is based on Cat.5e cable and 7 Watt IP Camera.
Overview
The All-New Intercoax EUP-2808RM/2816RM are 19” rack mountable managed Long Distance Ethernet and PoE over UTP Receiving Switches.
EUP-2808RM/2816RM are available with 8 or 16 T-Linx(UTP) ports.
EUP-2808RM/2816RM are capable of connecting more than 8/16 EUP Transmitters(or use ECP Tramsmitters with BTE-02) even with Daisy-Chain connection and also support PoE powered devices such as IP cameras. Data rates up to 1Gbps are achievable, making these devices the ideal choice in new or legacy installations where existing Coax cable is re-deployed as part of an upgrade from Analog to IP cameras.
EUP-2808RM has built-in 320 Watt power supply and EUP-2816RMhas built-in 640 Watt power supply. (*Dual power supply of 320w + 320wfor power shairing and redundancy) PoE up to 60W per port is available.
Browser based GUI manages all connected IEEE1901-HPAV standard devices. Furthermore, the world first innovative “Intercoax ECP Manager” software allows managing multiple of EUP-2808RM /2816RM remotely from central management office.
Features
• Total management software, “Intercoax ECP Manager Full version” included
• Friendly Graphic User Interface with EasyView can easily access and monitor multiple EUP-2808RM/2816RM
• Can configure Join & Unjoin, Changing joining password and reset power for remotely connected devices
• Real-time monitoring of power consumption for each port
• Multicast Setting with IGMP Query & Report Generator
• SNMP ready
• Port Locking for security
• Alarm LED & buzzer built-in switch and notification on ECP Manager
• Scheduled event reporting and alert reporting to designative users
• Back up & Restore of configuration
• 8/16 Port long distance up to 1,200m
• PoE/ PoE+/ Extra PoE up to 60W (PoE++) per T-Linx port
• Each port has Auto Power Short Protection. When the cable is being shorted or damaged, it won’t transmit power until the cable is fixed
• T-Linx Device Detection will secure the power transmission only to T-Linx devices
• 320W / 640W Built-in Power Supply
• Built-in crosstalk cancelling technology
• T-Linx Multiple Nodes can be used (Daisy Chain, Star, Ring, Etc.) on each port
• All IEEE1901-HPAV standard EoC devices can be easily connected remotely
• 19-inch(1U) rack mountable design
• Giga-bit SFP and Copper uplink port
• Any ECP Transmitters can also be used with BTE-02
Dimension
EUP-2808RM
EUP-2816RM
Page 07 of 26
T-Linx Detection ON / OFF UTP
T-Linx Detection ON / OFF
�R�E�A�R� �V�I�E�W
�T�O�P �V�I�E�W
441.5 44
330
349
Model ECP-2808RM EUP-2808RM ECP-2816RM EUP-2816RM
IGMP (V1/V2/V3) Snooping, IGMP Query & Report Generator
UP to 560Mbps Full Duplex UP to 1Gbps Full DuplexB-Linx / T-Linx Transmission Rate(Ethernet over Coax/UTP)
Interface
IEEE1901-HPAV
OFDM
2 remote transmitters per port recommended (Max up to 4 per port)
B-Linx / T-Linx Communication Standard
B-Linx / T-Linx Communication Modulation
B-Linx / T-Linx CommunicationMultiple Nodes (Daisy Chain)
AvailableECP Manager Connectivity
IGMP
Buzzer / MuteBuzzer
Blue
Green (10/100-Link) / Yellow (1,000-Link)
Green
Green (1,000-Link)
Red
LED Indication
Power
RJ45 Up-Link
SFP Up-Link
Port
GreenJoin
Alarm
Event
128-bit AESEncryption
Smart B-Linx / T-Linx Device Detection
Coax Up to 2,400m (RG6)
UTP Up to 1,200m (Cat.5e)
Data TransmissionDistance
Up to 1,200m (RG6 / 7W)Coax
Up to 1,500m (Cat.5e / 7W)
Power TransmissionDistance
UTP
AC100V~240V (50Hz/60Hz), 320W / 640W
Auto Detection & Protection
Power Max DC 56V, 1.07A (60W per port for PoE support)DC output per Port
AC Input
Port Short Protection
CE (including Railways Standard EN 50121-4), FCC, KCCertificationCompliance
IEC61000-4-5 4kV(1.2 / 50us), 2kA(8/20us)Surge Protection
-30C ~ +80CStorage Temp
0C ~ +60COperating Temp
Environment
10% ~ 80%Relative Humidity
Coax
Up-Link 1 x RJ45 - 10/100/1,000 Base-T with Auto MDIX, 1 x SFP - 1,000 Base-T
UTP
8 * 75Ω BNC (Female) -
Ethernet over Coax (B-Linx)
8 * 100Ω RJ45 (Female) -
Ethernet over UTP (T-LinX)
16 * 75Ω BNC (Female) -
Ethernet over Coax (B-Linx)
16 * 100Ω RJ45 (Female) -
Ethernet over UTP (T-LinX)
Detection On / Off
Mechanical5,160g 5,110g 5,600g 5,540gWeight
441.5(L) x 349(W) x 44(H)mmDimension 441.5(L) x 340(W) x 44(H)mm 441.5(L) x 349(W) x 44(H)mm 441.5(L) x 340(W) x 44(H)mm
2808RM / 2816RM Series8 / 16 Port Ethernet over Coax/UTP Managed Receiving Switch
High-Speed, Long distance Ethernet and PoE Extender over Coax
Network Solution Provider
* Multi-Port devices may have different bandwidth and power current for each port depending on number of cameras.
* Transmission distance may vary depending on the type and quality of cable, use of power and environmental condition.
* Distance is based on RG-6 coax cable and 7 Watt IP Camera.
Page 08 of 26
2808RM / 2816RM Series8 / 16 Port Ethernet over Coax/UTP Managed Receiving Switch
High-Speed, Long distance Ethernet and PoE Extender over Coax
Network Solution Provider
- INTERCOAX ECP ManagerProfessional management software for real-time status monitoring, configuration and remote access
Page 09 of 26
Receiver Overview of selected 2808 / 2816 Series Power Status with history & Port reset
ECP Configuration of Multiple 2808 / 2816 Series Remote device monitoring
User Friendly GUI with Multiple 2808 / 2816 Series Remote access to connected devices and software based Joining
Model ECP-2701:1Ch Transceiver
Coax
Ethernet
Ethernet
PoE (PoC)
Ethernet
EoC
Power
Link Quality
Power Quality
12VDC out
Input
PoE Output
DC Output
Dimension
Weight
Operating Temp
Storage Temp
Relative Humidity
Certification
Surge Protection
Interface
Transmission Rate
TransmissionDistance
LED Indication
Encryption
Power
Mechanical
Environment
Compliance
Optional Accessories
75Ω BNC (Female) - Ethernet over Coax (B-LinX)
RJ45 - 10/100/1000 Base-T with Auto-detect MDIX
270Mbps Full Duplex (PHY: 500Mbps)
up to 2,4Km(RG-6)
up to 1.2Km (RG-6 / 7W camera)
1 - Data(Green) / 1 - PoE(Yellow)
1 - BNC Join(Green)
1 - PWR(Blue)
1 - Good(Green) / 1-Bad(Red)
1 - Good(Green) : 40V~56V / 1-Bad(Red) : 40V Under
1 - 12V DC OUT(Green)
128-bit AES
DC12V~ DC56V
Support PoE (15W), PoE+ (30W), Extra PoE up to 60W
DC12V/ 1.2A
146(L) x 83(W) x 28(H)mm
198g
-20 ~ 60°C
-30 ~ 80°C
10% ~ 90%
FCC, CE, KC
IEC 61000-4-5 4kV(1.2 / 50us), 2kA(8 / 20us)
56VDC / 1.2A External Power Supply
Performance chart
Connection Diagram
Dimension
Specification
�T�O�P �V�I�E�W
132
83
28146
Overview
ECP-2701 is an Ultra High-Speed, long distance Ethernet & PoE extender that makes possible to transmit the IP data up to 2,400m and PoE up to 1,200m through various analog cables in different situations.
It is cost-effective and time saving solution to migrate existing analogsystem to IP based system since ECP-2701 supports easy installationutilizing the existing CCTV cable (Coax, UTP, 2wire)
With long distance transmission feature, the device makes to overcome100 meters distance limitation easily and reduces the construction costsignificantly compared with fiber optic configuration.
Features
• Ethernet over coax (UTP, 2 Wire) communication following IEEE1901 Standard
• Data + Power over Coax (or UTP, 2-wire)
• Data distance up to 2,400m
• PoE distance up to 1,200m
• Max. 270Mbps Bandwidth
• 10/100/1000 Full Duplex
• 128bit AES network encryption
• Supports Multi-connection (Daisy chain, Ring, Star, etc)
• PoE, PoE+, Extra PoE (Max. 60W output)
• Easy installation with Quality LED (Data & Power), Plug & Play
• 12VDC output (for Non-PoE Camera)
ECP-2701Single Port Ethernet over Coax Transceiver
Network Solution Provider
High-Speed, Long distance Ethernet and PoE Extender over Coax
12V DC OUT
ECP-2701ECP-2701
PoECamera
56V DC/1.2A Power Supply
Coax (UTP / 2 Wire)
ECP-2701ECP-2701
10/100 Ethernet
Non-PoEIP Camera
PoE
Data
Data
NVR Network Switch
EoC
PoC
EoC
PoC
* Transmission distance may vary depending on the type and quality of cable, use of power and environmental condition.
* Distance is based on RG-6 coax cable and 7 Watt IP Camera.
Page 10 of 26
Transmission Rate / meter PoE (Watt) / meter
RG-6 Coax RG-6 Coax56VDC/1.2A Input
200 1600800 2400
270Mbps
30
130
200
60
30W
60W
15W
10W
5W
10050 1200m750550
(Optional)56V DC/1.2A Power Supply
Model ECP-2704T: 4Ch Transceiver
Coax
Ethernet
Ethernet
PoE (PoC)
Ethernet
EoC
Power
Link Quality
Power Quality
Channel
Input
PoE Output
Interface
Transmission Rate
TransmissionDistance
LED Indication
Encryption
Power
75Ω BNC (Female) - Ethernet over Coax (B-LinX)
RJ45 - 10/100/1000 Base-T with Auto-detect MDIX
270Mbps Full Duplex (PHY: 500Mbps)
up to 2,4Km(RG-6)
up to 1.2Km (RG-6 / 7W camera)
4 - Data(Green) / 4 - PoE(Yellow)
1 - BNC Join(Green)
1 - PWR(Blue)
1 - Good(Green) / 1-Bad(Red)
1 - Good(Green) : 40V~56V / 1-Bad(Red) : 40V Under
4 - Port 1 ~ Port 4(Green)
128-bit AES
DC12V~ DC56V
Support PoE (15W), PoE+ (30W), Extra PoE up to 60W
Dimension
Weight
Operating Temp
Storage Temp
Relative Humidity
Certification
Surge Protection
Mechanical
Environment
Compliance
Optional Accessories
174.5(L) x 133.5(W) x 29.5(H)mm
343g
-20 ~ 60°C
-30 ~ 80°C
10% ~ 90%
FCC, CE, KC
IEC 61000-4-5 4kV(1.2 / 50us), 2kA(8 / 20us)
56VDC / 1.2A External Power Supply
Overview
ECP-2704T is a 4 port Ultra High-Speed, long distance Ethernet & PoEtransmitter that receives IP data from 4 different IP cameras or other network devices and transmits the EoC signal over one coaxial cable.
It is cost-effective and time saving solution to migrate existing analogsystem to IP based system since ECP-2704T supports easy installationutilizing the existing CCTV cable (Coax, UTP, 2wire)
With long distance transmission feature, the device makes to overcome100 meters distance limitation easily and reduce the construction costsignificantly compared with fiber optic configuration.
Features
• Ethernet over coax (UTP, 2 Wire) communication following IEEE1901 Standard
• Data + Power over Coax (or UTP, 2-wire)
• Data distance up to 2,400m
• PoE distance up to 1,200m
• Max. 270Mbps Bandwidth
• 10/100/1000 Full Duplex
• 128bit AES network encryption
• Supports Multi-connection (Daisy chain, Ring, Star, etc)
• PoE, PoE+, Extra PoE (Max. 60W output)
• Easy installation with Quality LED (Data & Power), Plug & Play
• Current protection for safe power transmission
• 4 Port PoE Output
Connection Diagram
ECP-2704T4 Port Ethernet over Coax Transmitter
Specification
Dimension
�T�O�P �V�I�E�W
Network Solution Provider
High-Speed, Long distance Ethernet and PoE Extender over Coax
133.
5
29.5162.4
174.5
PoECamera
ECP-2704T
ECP-2701
Coax (UTP / 2 Wire)
56V DC/1.2A Power Supply
NVR Network Switch
PoE
Data
EoC
PoC
* Multi-Port devices may have different bandwidth and power current for each port depending on number of cameras.
* Transmission distance may vary depending on the type and quality of cable, use of power and environmental condition.
* Distance is based on RG-6 coax cable and 7 Watt IP Camera.
Page 11 of 26
(Optional)56V DC/1.2A Power Supply
Model ECP-2704R: 4Ch Receiver
Coax
Ethernet
Ethernet
PoE (PoC)
Ethernet
EoC
Power
Link Quality
Power Quality
Channel
Input
PoE Output
Interface
Transmission Rate
TransmissionDistance
LED Indication
Encryption
Power
75Ω BNC (Female) - Ethernet over Coax (B-LinX)
1*RJ45 - 10/100/1000 Base-T with Auto-detect MDIX
270Mbps Full Duplex (PHY: 500Mbps)
up to 2.4Km(RG-6)
up to 1.2Km (RG-6 / 7W camera)
1 - Link(Yellow) / 1 - ACT(Green)
1 - BNC Join(Green)
1 - PWR(Blue)
1 - Good(Green) / 1-Bad(Red)
1 - Good(Green) : 40V~56V / 1-Bad(Red) : 40V Under
4 - CH1 ~ CH4(Green)
128-bit AES
DC12V~ DC56V
Support PoE (15W), PoE+ (30W), Extra PoE up to 60W
Dimension
Weight
Operating Temp
Storage Temp
Relative Humidity
Certification
Surge Protection
Mechanical
Environment
Compliance
Optional Accessories
177(L) x 133.5(W) x 29.5(H)mm
360g
-20 ~ 60°C
-30 ~ 80°C
10% ~ 90%
FCC, CE, KC
IEC 61000-4-5 4kV(1.2 / 50us), 2kA(8 / 20us)
56VDC / 1.2A External Power Supply
Overview
ECP-2704R is a 4 port Ultra High-Speed, long distance Ethernet & PoE receiver that receives 4 different signals from EoC Signal from ECP-2701 and transmits IP data to network switch or NVR via RJ45 port.
It is cost-effective and time saving solution to migrate existing analogsystem to IP based system since ECP-2704R supports easy installationutilizing the existing CCTV cable (Coax, UTP, 2wire)
With Smart Impedance Matching feature, the device maintains optimumsignal level without any interference and Smart Over Current Protection(SOCP) feature makes the device to transmit power over coax safely.
Features
• Ethernet over coax (UTP, 2 Wire) communication following IEEE1901 Standard
• Data + Power over Coax (or UTP, 2-wire)
• Data distance up to 2,400m
• PoE distance up to 1,200m
• Max. 270Mbps Bandwidth
• 10/100/1000 Full Duplex
• 128bit AES network encryption
• Supports Multi-connection (Daisy chain, Ring, Star, etc)
• PoE, PoE+, Extra PoE (Max. 60W PoC output)
• Easy installation with Quality LED (Data & Power), Plug & Play
• Current protection for safe power transmission
Connection Diagram
ECP-2704R4 Port Ethernet over Coax Receiver
Specification
Dimension
�T�O�P �V�I�E�W
Network Solution Provider
High-Speed, Long distance Ethernet and PoE Extender over Coax
133.
5
29.5162.4
177
ECP-2701
ECP-2701
ECP-2701
ECP-2701
ECP-2704R
Coax (UTP / 2 Wire)
PoECamera
Non-PoEIP Camera
56V DC/1.2A Power Supply
NVR Network Switch
PoE
Data EoC
PoC
Data EoC
PoC
* Multi-Port devices may have different bandwidth and power current for each port depending on number of cameras.
* Transmission distance may vary depending on the type and quality of cable, use of power and environmental condition.
* Distance is based on RG-6 coax cable and 7 Watt IP Camera.
Page 12 of 26
Model ECP-9501T ECP-9501R
Coax
Ethernet
Ethernet
PoE (PoC)
Interface
Transmission Rate
TransmissionDistance
1*75Ω BNC (Female) - Ethernet over Coax
1*RJ45 - 10/100 Base-T with Auto-detect MDIX
95Mbps Full Duplex (PHY: 200Mbps)
up to 1,000m(RG-6)
up to 1,000m (RG-6 / 7W camera)
LED Indication
Ethernet1 - Data(Green) / 1 - PoE(Yellow)
Link/Act(Green) / 10/100(Yellow)
EoC
Power
1 - BNC Join(Green)
1 - PWR(Blue)
Encryption 128-bit AES
Power
Input
PoE Output
DC12V~ DC56V
Support PoE (15W), PoE+ (30W),Extra PoE up to 60W
Dimension
Weight
Operating Temp
Storage Temp
Relative Humidity
Certification
Surge Protection
Mechanical
Environment
Compliance
Optional Accessories
94(L) x 61.6(W) x 24(H)mm
110g 105g
PoE Not SupportedPoC Only
-20 ~ 60°C
-30 ~ 80°C
10% ~ 90%
FCC, CE, KC
IEC 61000-4-5 4kV(1.2 / 50us), 2kA(8 / 20us)
56VDC / 1.2A External Power Supply
Overview
ECP-9501 is a High-Speed, long distance Ethernet & PoE extender thatmakes possible to transmit the IP data up to 1,000m and PoE up to 1,000m various analog cables in different situations.
It is cost-effective and time saving solution to migrate existing analogsystem to IP based system since ECP-9501 supports easy installationutilizing the existing CCTV cable (Coax, UTP, 2wire)
With long distance transmission feature, the device makes to overcome100 meters distance limitation easily and reduces the construction costsignificantly compared with fiber optic configuration.
Features
• Ethernet over coax (UTP, 2 Wire) communication following IEEE1901 Standard
• Data + Power over Coax (or UTP, 2-wire)
• Data distance up to 1,000m
• PoE distance up to 1,000m
• Max. 95Mbps Bandwidth
• 10/100 Full Duplex
• 128bit AES network encryption
• Supports Multi-connection (Daisy chain, Ring, Star, etc)
• PoE, PoE+, Extra PoE (Max. 60W output)
• Easy installation with Plug & Play
• Current protection for safe power transmission
• Slim design
Performance chart
Connection Diagram
ECP-9501T / RSingle Port Ethernet over Coax Transmitter / Receiver
Specification
Dimension
�T�O�P �V�I�E�W
Network Solution Provider
High-Speed, Long distance Ethernet and PoE Extender over Coax
82.4
61.6
24
26.2104.4
94
Transmission Rate / meter
RG-6 Coax
200 600 1000m400 800
95Mbps
10
40
60
20
PoE (Watt) / meter
RG-6 Coax56VDC/1.2A Input30W
60W
15W
10W
5W
20050 1000m700500
PoECamera
56V DC/1.2A Power Supply
ECP-9501T
ECP-9501R
Coax (UTP / 2 Wire)
NVR Network Switch
PoE
Data EoC
PoC
* Transmission distance may vary depending on the type and quality of cable, use of power and environmental condition.
* Distance is based on RG-6 coax cable and 7 Watt IP Camera.
ECP-9501T
ECP-9501R
Page 13 of 26
(Optional)56V DC/1.2A Power Supply
Model ECP-9504R: 4Ch Receiver
Coax
Ethernet
Ethernet
PoE (PoC)
Ethernet
EoC
Power
Interface
Transmission Rate
TransmissionDistance
LED Indication
4 * 75Ω BNC (Female) - Ethernet over Coax (B-LinX)
1 * RJ45 - 10/100 Base-T with Auto-detect MDIX
95Mbps Full Duplex (PHY: 200Mbps)
up to 1,000m(RG-6)
up to 1,000m (RG-6 / 7W camera)
1 - Data(Green)
1 - BNC Join(Green)
1 - PWR(Blue)
Input
PoE Output
Encryption
Power
128-bit AES
DC12V~ DC56V
Support PoE (15W), PoE+ (30W), Extra PoE up to 60W
Dimension
Weight
Operating Temp
Storage Temp
Relative Humidity
Certification
Surge Protection
Mechanical
Environment
Compliance
Optional Accessories
95(L) x 133.5(W) x 29.5(H)mm
360g
-20 ~ 60°C
-30 ~ 80°C
10% ~ 90%
FCC, CE, KC
IEC 61000-4-5 4kV(1.2 / 50us), 2kA(8 / 20us)
56VDC / 1.2A External Power Supply
Overview
ECP-9504R is a 4 port High-Speed, long distance Ethernet & PoE receiverthat receives 4 different signals from ECP-9501 and transmits IP data tonetwork switch or NVR via RJ45 port.
It is cost-effective and time saving solution to migrate existing analogsystem to IP based system since ECP-9504R supports easy installationutilizing the existing CCTV cable (Coax, UTP, 2wire)
With Smart Impedance Matching feature, the device maintains optimumsignal level without any interference and Smart Over Current Protection(SOCP) feature makes the device to transmit power over coax safely.
Features
• Ethernet over coax (UTP, 2 Wire) communication following IEEE1901 Standard
• Data + Power over Coax (or UTP, 2-wire)
• Data distance up to 1,000m
• PoE distance up to 1,000m
• Max. 95Mbps Bandwidth
• 10/100 Full Duplex
• 128bit AES network encryption
• Supports Multi-connection (Daisy chain, Ring, Star, etc)
• PoE, PoE+, Extra PoE (Max. 60W output)
• Easy installation with Plug & Play
• Current protection for safe power transmission
• Slim design
Connection Diagram
ECP-9504R4 Port Ethernet over Coax Receiver
Specification
Network Solution Provider
High-Speed, Long distance Ethernet and PoE Extender over Coax
29.5
133.
5
82.495
Dimension
�T�O�P �V�I�E�W
PoECamera
56V DC/1.2A Power Supply
Coax (UTP / 2 Wire)
ECP-9501T
ECP-9501T
ECP-8301T
ECP-8401T
ECP-9504R
NVR Network Switch
PoE
Data EoC
PoC
* Multi-Port devices may have different bandwidth and power current for each port depending on number of cameras.
* Transmission distance may vary depending on the type and quality of cable, use of power and environmental condition.
* Distance is based on RG-6 coax cable and 7 Watt IP Camera.
Page 14 of 26
Overview
ECP-9508R / ECP-9516R is multi-port High-Speed, long distanceEthernet & PoE unmanaged switch that receives 8 / 16 EoC Signal fromECP-9501 and transmit IP data to network switch or NVR via RJ45 port.
It is cost-effective and time saving solution to migrate existing analogsystem to IP based system since ECP-9508R / ECP-9516R supports easyinstallation utilizing the existing CCTV cable (Coax, UTP, 2wire)
With Smart Impedance Matching feature, the device maintains optimumsignal level without any interference and Smart Over Current Protection(SOCP) feature makes the device to transmit power over coax safely.
Features
• 19" Rack Mountable unmanaged switch
• Ethernet over coax (UTP, 2 Wire) communication following IEEE1901 Standard
• Data + Power over Coax (or UTP, 2-wire)
• Data distance up to 1,000m
• PoE distance up to 1,000m
• Max. 180Mbps / 360Mbps Bandwidth
• 130W / 260W Built-in Power supply
• 10/100/1000 Full Duplex
• 128bit AES network encryption
• Supports Multi-connection (Daisy chain, Ring, Star, etc)
• PoE, PoE+, Extra PoE (Max. 60W output)
• Easy installation with Plug & Play
• Current protection for safe power transmission
ECP-9508R / 9516R8 / 16 Port Ethernet over Coax Receiver
Network Solution Provider
High-Speed, Long distance Ethernet and PoE Extender over Coax
Dimension
Connection DiagramSpecification
Model ECP-9508: 8Ch Receiver ECP-9516R: 16Ch Receiver
Ethernet
Ethernet
PoE (PoC)
Transmission Rate
TransmissionDistance
Ethernet
Port
Power
Encryption
InputPower
PoE Output
Dimension
WeightMechanical
Operating Temp
Storage Temp
Relative Humidity
Certification
Surge Protection
Environment
Compliance
Coax8 * 75Ω BNC (Female) - EoC (B-LinX)
16 * 75Ω BNC (Female) - EoC (B-LinX)
1 * RJ45 - 10/100/1000 Base-T with Auto-detect MDIX
180Mbps Full Duplex 360Mbps Full Duplex
up to 1,000m(RG-6)
up to 1,000m (RG-6 / 7W camera)
1 - ACT(Green) / 1-Link(Yellow)
1~8 Port (Green) 1~16 Port (Green)
POWER(Blue)
128-bit AES
AC100V~240V (50Hz / 60Hz) 2A
PoE Not Supported, PoC Only
430(L) x 280(W) x 45(H)mm
3,150g 3,700g
-20 ~ 60°C
-30 ~ 80°C
10% ~ 90%
FCC, CE, KC
IEC 61000-4-5 4kV(1.2 / 50us), 2kA(8 / 20us)
LED Indication
Interface
AC 100~240V
ECP-9516R
7
6
5
3
2
1
ECP-8301R
ECP-8401T
15
14
13
11
10
9
10/100 Ethernet Coax (UTP / 2 Wire)
PoEPoECamera
ECP-9501T
ECP-8301T
NVR Network Switch
PoE
DataEoC
PoC
�R�E�A�R� �V�I�E�W
�T�O�P �V�I�E�W
�F�R�O�N�T� �V�I�E�W
432
265
44
283.
5
* Multi-Port devices may have different bandwidth and power current for each port depending on number of cameras.
* Transmission distance may vary depending on the type and quality of cable, use of power and environmental condition.
* Distance is based on RG-6 coax cable and 7 Watt IP Camera.
AC/DC Adapter(12V)
Page 15 of 26
Connection Diagram
Performance chart
Model ECP-8401T ECP-8401R
Coax
Ethernet
Ethernet
PoE (PoC)
Ethernet
EoC
Power
PoE
Interface
Transmission Rate
TransmissionDistance
LED Indication
75Ω BNC (Female) - Ethernet over Coax (B-LinX)
RJ45 - 10/100 Base-T with Auto-detect MDIX
95Mbps Full Duplex (PHY: 200Mbps)
up to 2,4Km(RG-6)
up to 1.2Km (RG-6 / 7W camera)
1 - PoE Link(Yellow)
1 - Power Link(Green)
1 - Power On(Amber)
1 - PoE Output(Red) 1 - PoE Input(Red)
Input
PoE Output
Encryption
Power
128-bit AES
B-Linx or DC12V~56V PoE Switch or DC12V~56V
Support PoE (15W), PoE+ (30W),
Extra PoE up to 60W
PoE Not SupportedPoC Only
Dimension
Weight
Operating Temp
Storage Temp
Relative Humidity
Certification
Surge Protection
Mechanical
Environment
Compliance
Optional Accessories
86.6(L) x 40.1(W) x 25(H)mm
78g
-10 ~ 60°C
-40 ~ 80°C
10% ~ 90%
FCC, CE, KC
IEC 61000-4-5 4kV(1.2 / 50us), 2kA(8 / 20us)
56VDC / 1.2A External Power Supply
Overview
ECP-8401 is a High-Speed, long distance Ethernet & PoE extender thatmakes possible to transmit the IP data up to 2,400m and PoE up to 1,200mthrough various analog cables in different situations.
It is cost-effective and time saving solution to migrate existing analogsystem to IP based system since ECP-8401 supports easy installationutilizing the existing CCTV cable (Coax, UTP, 2wire)
With long distance transmission feature, the device makes to overcome 100 meters distance limitation easily and reduces the construction cost significantly compared with fiber optic configuration.
Features
• Ethernet over coax (UTP, 2 Wire) communication following IEEE1901 Standard
• Data + Power over Coax (or UTP, 2-wire)
• Data distance up to 2,400m
• PoE distance up to 1,200m
• Max. 95Mbps Bandwidth
• 10/100 Full Duplex
• 128bit AES network encryption
• Supports Multi-connection (Daisy chain, Ring, Star, etc)
• PoE, PoE+, Extra PoE (Max. 60W output)
• Passive PoE ON/OFF Switch - ECP-8401T model only
• Easy installation with Quality LED, Plug & Play
• Current protection for safe power transmission
• Support PoE+ Input (25.5W) from PoE Switch – ECP-8401R Only
• Utra-slim design
Network Solution Provider
High-Speed, Long distance Ethernet and PoE Extender over CoaxECP-8401T / RSingle Port Ethernet over Coax Transmitter / Receiver
Dimension
�T�O�P �V�I�E�W
86.6
66.4
40
.1
25
Specification
* Transmission distance may vary depending on the type and quality of cable, use of power and environmental condition.
* Distance is based on RG-6 coax cable and 7 Watt IP Camera.
ECP-8301T
ECP-8301R
ECP-8401T
ECP-8401R
Coax (UTP / 2 Wire)
Coax (UTP / 2 Wire)
ECP-8401TECP-8401R
PoECamera
PoECamera
NVR Network Switch
56V DC/1.2A Power Supply
PoE
Data
PoE
PoE
Data
EoC
PoC
EoC
PoC
Transmission Rate / meter PoE (Watt) / meter
RG-6 Coax RG-6 Coax56VDC/1.2A Input
500 15001000 2400m
95Mbps
10
40
60
20
30W
60W
15W
10W
5W
10050 1200m750550
Page 16 of 26
Connection Diagram
Performance chart
Model EUP-8401T EUP-8401R
EoC Signal
Ethernet
Ethernet
PoE (PoC)
Ethernet
EoC
Power
PoE
Interface
Transmission Rate
TransmissionDistance
LED Indication
1*RJ45 - Ethernet over Coax (T-LinX)
RJ45 - 10/100/1000 Base-T with Auto-detect MDIX
95Mbps Full Duplex (PHY: 200Mbps)
up to 1,2Km(Cat.5 / Cat.5e)
up to 1.2Km (Cat.5e / 56VDC input / 7W camera)
1 - Ethernet Link(Yellow)
1 - Join(Green)
1 - Power On(Amber)
1 - PoE Output(Red) 1 - PoE Input(Red)
Not Supported Up to 25.5W (PD)
Input
PoE Input
PoE Output
Encryption
Power
128-bit AES
T-Linx or DC12V~56V PoE Switch or DC12V~56V
Support PoE (15W), PoE+ (30W),
Extra PoE up to 60W
PoE Not SupportedPoC Only
Dimension
Weight
Operating Temp
Storage Temp
Relative Humidity
Certification
Surge Protection
Mechanical
Environment
Compliance
Optional Accessories
86.6(L) x 40.1(W) x 25(H)mm
78g
-10 ~ 60°C
-40 ~ 80°C
10% ~ 90%
FCC, CE, KC
IEC 61000-4-5 4kV(1.2 / 50us), 2kA(8 / 20us)
56VDC / 1.2A External Power Supply
Overview
EUP-8401 is a High-Speed, long distance Ethernet & PoE extender thatmakes possible to transmit the Ethernet signal up to 1,200m and PoE up to 1,200m via UTP cables in different situations.
It is cost-effective and time saving solution to migrate existing analogsystem to IP based system since EUP-8401 supports easy installationutilizing the existing UTP cable.
With long distance transmission feature, the device makes to overcome 100 meters distance limitation easily and reduces the construction cost significantly compared with fiber optic configuration.
Features
• Ethernet over UTP communication following IEEE1901 Standard
• Data + Power over UTP cable (Cat.5e or better)
• Data distance up to 1,200m
• PoE distance up to 1,200m
• Max. 95Mbps Bandwidth
• 10/100 Full Duplex
• 128bit AES network encryption
• Supports Multi-connection (Daisy chain, Ring, Star, etc)
• PoE, PoE+, Extra PoE (Max. 60W output)
• Passive PoE ON/OFF Switch - EUP-8401T model only
• Easy installation with Quality LED, Plug & Play
• Current protection for safe power transmission
• Support PoE+ Input (25.5W) from PSE devices – EUP-8401 Only
• Utra-slim design
Network Solution Provider
High-Speed, Long distance Ethernet and PoE Extender over CoaxEUP-8401T / RSingle Port Ethernet over UTP Transmitter / Receiver
Dimension
�T�O�P �V�I�E�W
85.4
66.4
40
.1
25
Specification
* Transmission distance may vary depending on the type and quality of cable, use of power and environmental condition.
* Distance is based on Cat.5e cable and 7 Watt IP Camera.
EUP-8401T
EUP-8401R
EUP-8401T
EUP-8401R
Cat.5 / Cat.5e
Cat.5 / Cat.5e
EUP-8401TEUP-8401R
PoECamera
PoECamera
NVR Network Switch
56V DC/1.2A Power Supply
PoE
Data
PoE
PoE
Data
EoC
PoC
EoC
PoC
Transmission Rate / meter PoE (Watt) / meter
Cat.5e Cat.5e56VDC/1.2A Input
100 800400 1200m
95Mbps
10
40
60
20
30W
60W
15W
10W
5W
10050 1200m750550
Page 17 of 26
Performance chart
Connection Diagram
Model ECP-8301T ECP-8301R
Coax
Ethernet
Ethernet
PoE (PoC)
Ethernet
EoC
Power
Interface
Transmission Rate
TransmissionDistance
LED Indication
Input
PoE Output
Encryption
Power
Dimension
Weight
Operating Temp
Storage Temp
Relative Humidity
Certification
Surge Protection
Mechanical
Environment
Compliance
Optional Accessories
1 * 75Ω BNC (Female) - EoC (B-LinX)
1 * RJ45 - 10/100 Base-T with Auto-detect MDIX
80Mbps Full Duplex (PHY: 200Mbps)
up to 2,400m(RG-6)
up to 1,200m (RG-6 / 7W camera)
1 - Data(Green) / 1-PoE(Yellow)
1 - BNC Join(Green)
1 - PWR(Blue)
128-bit AES
DC12V~ DC56V
94(L) x 61.6(W) x 24(H)mm
103g 91g
-20 ~ 60°C
-40 ~ 80°C
10% ~ 90%
FCC, CE, KC
IEC 61000-4-5 4kV(1.2 / 50us), 2kA(8 / 20us)
56VDC / 1.2A External Power Supply
Support PoE (15W)PoE+ (30W)
Extra PoE up to 60W
Overview
ECP-8301 is a High-Speed, long distance Ethernet & PoE extender thatmakes possible to transmit the IP data up to 2,400m and PoE up to 1,200m through various analog cables in different situations.
It is cost-effective and time saving solution to migrate existing analogsystem to IP based system since ECP-8301 supports easy installationutilizing the existing CCTV cable (Coax, UTP, 2wire)
With long distance transmission feature, the device makes to overcome100 meters distance limitation easily and reduces the construction costsignificantly compared with fiber optic configuration.
Features
• Ethernet over coax (UTP, 2 Wire) communication following IEEE1901 Standard
• Data + Power over Coax (or UTP, 2-wire)
• Data distance up to 2,400m
• PoE distance up to 1,200m
• Max. 80Mbps Bandwidth
• 10/100 Full Duplex
• 128bit AES network encryption
• Supports Multi-connection (Daisy chain, Ring, Star, etc)
• PoE, PoE+, Extra PoE (Max. 60W output / ECP-8301T only)
• Easy installation with Plug & Play operation
• Current protection for safe power transmission
ECP-8301T / RSingle Port Ethernet over Coax Transmitter / Receiver
Specification
Network Solution Provider
High-Speed, Long distance Ethernet and PoE Extender over Coax
Transmission Rate / meter PoE (Watt) / meter
RG-6 CoaxRG-6 Coax56VDC/1.2A Input
200 1200 2400m600 1800
95Mbps
10
40
60
20
30W
60W
15W
10W
5W
20050 1200m800600
ECP-8301T
ECP-8301T/R
Coax (UTP / 2 Wire)
Coax (UTP / 2 Wire)
AC/DC Adapter(12V) ECP-8301R
ECP-8301T/RIP
Camera
PoECamera
NVR Network Switch
56V DC/1.2A Power Supply
Data
PoE
Data EoC
PoC
EoC
PoC
* Transmission distance may vary depending on the type and quality of cable, use of power and environmental condition.
* Distance is based on RG-6 coax cable and 7 Watt IP Camera.
PoE Not SupportedPoC Only
Dimension
�T�O�P �V�I�E�W
82.4
61.6
24
26.2104.4
94
ECP-8301T
ECP-8301R
Page 18 of 26
Dimension
Overview
ECP-101 Series is High-Speed, long distance Ethernet & PoE extender that makes possible to transmit the Ethernet signal and PoE up to 600mthrough Coax cables in different situations.
It is cost-effective and time saving solution to migrate existing analogsystem to IP based system since ECP-101 supports easy installationutilizing the existing Coax cable.
With long distance transmission feature, the device makes to overcome100 meters distance limitation easily and reduces the construction costsignificantly compared with fiber optic configuration.
Features
• Ethernet Extension over existing coaxial cable
• Data + Power over Coaxial cable
• Data and PoE distance up to 600m
• Max. 100Mbps Bandwidth
• 10/100 Full Duplex
• Multicast supported
• PoE, PoE+, Extra PoE (Max. 60W output)
• Easy installation with Quality LED (Data & Power), Plug & Play
• Support PoE+ Input (25.5W) from PSE devices – ECP-101R Only
• Compact design
ECP-101T / RSingle Port Ethernet over Coax Transmitter / Receiver
Network Solution Provider
High-Speed, Long distance Ethernet and PoE Extender over Coax
Performance chart
Connection Diagram
Transmission Rate / meter PoE (Watt) / meter
RG-6 Coax
RG-6 Coax56VDC/1.2A Input
100 600300
100Mbps
10
50
30W
60W
20W
15W
10060 600300
* Transmission distance may vary depending on the type and quality of cable, use of power and environmental condition.
* Distance is based on RG-6 coax cable and 7 Watt IP Camera.
Specification
Model ECP-101T ECP-101R
EoC Signal
Ethernet
Ethernet
PoE (PoC)
Ethernet
EoC
Power
Interface
Transmission Rate
TransmissionDistance
LED Indication
1 * 75Ω BNC (Female) - Ethernet over Coax (B-LinX)
RJ45 - 10/100 Base-T with Auto-detect MDIX
100Mbps Full Duplex
up to 600 m(RG-6 Coax Cable)
up to 600 m (RG-6 / 56VDC Input / 7W camera)
1 - Link / Act (Green) / 1- PoE (Yellow)
1 - Link (Green) / 1- Act (Yellow)
1 - Power On(Blue)
Dimension
WeightMechanical
62.2(L) x 61.6(W) x 24(H)mm
. 77g
Operating Temp
Storage Temp
Relative Humidity
Certification
Surge Protection
Environment
Compliance
Optional Accessories
-20 ~ 60°C
-30 ~ 80°C
10% ~ 90%
FCC, CE, KC
IEC 61000-4-5 4kV(1.2 / 50us), 2kA(8 / 20us)
56VDC / 1.2A External Power Supply
Input
PoE OutputPower
DC12V~DC56V
PoE Input Not Supported Up to 25.5W (PD)
PoE Not SupportedPoC Only
IEEE802.3af(PoE), IEEE802.3at (PoE+),Extra PoE up to 60W
�T�O�P �V�I�E�W
24
61.6
5052.4
62.2
Page 19 of 26
ECP-101R56V DC/1.2A Power Supply
NVR Network Switch
PoE
ECP-101T ECP-101R
PoECamera
PoE
DataCoaxial Cable
EoC
PoC
ECP-101T
PoECamera
Coaxial Cable
PoE
DataEoC
PoC
Dimension
Overview
EUP-101 Series is High-Speed, long distance Ethernet & PoE extender that makes possible to transmit the Ethernet signal and PoE up to 600mthrough UTP cables in different situations.
It is cost-effective and time saving solution to migrate existing analogsystem to IP based system since EUP-101 supports easy installationutilizing the existing UTP cable.
With long distance transmission feature, the device makes to overcome100 meters distance limitation easily and reduces the construction costsignificantly compared with fiber optic configuration.
Features
• Ethernet Extension using UTP cable (Cat.5e or better)
• Data + Power over UTP cable
• Data and PoE distance up to 600m
• Max. 100Mbps Bandwidth
• 10/100 Full Duplex
• Multicast supported
• PoE, PoE+, Extra PoE (Max. 60W output)
• Easy installation with Quality LED (Data & Power), Plug & Play
• Support PoE+ Input (25.5W) from PSE devices – EUP-101R Only
• Compact design
EUP-101T / RSingle Port Ethernet over UTP Transmitter / Receiver
Network Solution Provider
High-Speed, Long distance Ethernet and PoE Extender over Coax
Performance chart
Connection Diagram
* Transmission distance may vary depending on the type and quality of cable, use of power and environmental condition.
* Distance is based on Cat.5e cable and 7 Watt IP Camera.
Specification
�T�O�P �V�I�E�W
24
61.6
5052.4
Page 20 of 26
EUP-101R56V DC/1.2A Power Supply
NVR Network Switch
PoE
EUP-101T EUP-101R
PoECamera
PoE
DataCat.5 or better
EoC
PoC
EUP-101T
PoECamera
Cat.5 or better
PoE
DataEoC
PoC
Model EUP-101T EUP-101R
EoC Signal
Ethernet
Ethernet
PoE (PoC)
Ethernet
EoC
Power
Interface
Transmission Rate
TransmissionDistance
LED Indication
1 * RJ45 - Ethernet over Coax (T-LinX)
RJ45 - 10/100 Base-T with Auto-detect MDIX
100Mbps Full Duplex
up to 600 m(RG-6 Coax Cable)
up to 600 m (Cat.5e / 56VDC Input / 7W camera)
1 - Link / Act (Green) / 1- PoE (Yellow)
1 - Link (Green) / 1- Act (Yellow)
1 - Power On(Blue)
Dimension
WeightMechanical
52.4(L) x 61.6(W) x 24(H)mm
. 70g
Operating Temp
Storage Temp
Relative Humidity
Certification
Surge Protection
Environment
Compliance
Optional Accessories
-20 ~ 60°C
-30 ~ 80°C
10% ~ 90%
FCC, CE, KC
IEC 61000-4-5 4kV(1.2 / 50us), 2kA(8 / 20us)
56VDC / 1.2A External Power Supply
Input
PoE OutputPower
DC12V~DC56V
PoE Input Not Supported Up to 25.5W (PD)
PoE Not SupportedPoC Only
IEEE802.3af(PoE), IEEE802.3at (PoE+),Extra PoE up to 60W
Transmission Rate / meter PoE (Watt) / meter
Cat.5e
Cat.5e56VDC/1.2A Input
100 600300
100Mbps
10
50
30W
60W
20W
15W
10060 600300
Performance chart
Overview
BTE-02 is BNC to RJ-45 converter which supports EoC signal and powertransmission over UTP cable.
This converter works with Intercoax ECP series exclusively to use UTP(Cat.5e) cable instead of Coaxial cable and it maintains optimum EoC signalwithout interference using impedance matching technology.
Features
• B-Linx to T-Linx converter
• Exclusive Impedance Matching technology (maintain optimum signal without interference)
• RJ-45 & BNC, Plug & Play easy installation
• Power LED
BTE-02Single Port BNC to RJ-45 Exchanger
Network Solution Provider
High-Speed, Long distance Ethernet and PoE Extender over Coax
Dimension
�T�O�P �V�I�E�W
24
24.5
42
60
Model BTE-02: 1Ch BNC to RJ45 Exchanger
Coax
UTPInterface
RJ45 - Ethernet over Coax
LED Indication Power RED On : Normal
up to 60W (By-Pass)PoE
Standards
Max. Current (W) Support PoE (15W), PoE+ (30W), Extra PoE up to 60W
Dimension
Weight
Operating Temp
Storage Temp
Relative Humidity
Mechanical
Environment
60(L) x 24(W) x 24.5(H)mm
30g
-20 ~ 60°C
-40 ~ 80°C
0% ~ 95% Connection Diagram
Specification
75Ω BNC (Male) - Ethernet over Coax (T-LinX)
PoECamera ECP-2701
ECP-2701
56V DC/1.2A Power Supply
Cat.5e or Better
NVR Network Switch
PoE
Data EoC
PoC
Cat.5e
200 2000 4000m1000 3000
270Mbps
10
95
150
50
ECP-2701
Transmission Rate / meter PoE (Watt) / meter
Cat.5e56VDC/1.2A Input30W
60W
15W
10W
5W
200 1200m600 90030050
Page 21 of 26
Overview
EPR Series are Ethernet & PoE Repeaters that make possible to overcome max. 100m distance limitation of the network configuration.
For more distance extension, the devices can be added by daisy-chaining(up to 600m)
It is cost effective and easy installation solution for all kind of PoE (IEEE802.3af / 15W) compliant devices such as IP cameras, Network Switch, VoIP Phone, etc.
Features
• Ethernet & PoE Repeater
• Up to 200m Ethernet & PoE extension (EPR-111:130m)
• Additional extension by adding devices
• 15W PoE output (IEEE802.3af)
• PoE On/Off switch supported (EPR-101 only)
• No additional power required (PoE powered)
• Slim design (EPR-111)
Model EPR-101 EPR-111
LAN / PoE In
LAN / PoE OutInterface
Transmission Rate
1 * RJ45 - 10/100 Base-T with Auto-detect MDIX
1 * RJ45 - 10/100 Base-T with Auto-detect MDIX
100Mbps Full Duplex
LED Indication Ethernet
Power
1 - Data(Green)
1-PoE(Yellow)
PoEStandards
Max. Power
IEEE802.3af(PoE)
Max. 15W
Transmission Distance 200m 130m
Dimension
Weight
Operating Temp
Storage Temp
Relative Humidity
Mechanical
Environment
83(L) x 83(W) x 28(H)mm 68.4(L) x 40.9(W) x 21.8(H)mm
118g 72.5g
0 ~ 60°C
-20 ~ 80°C
10% ~ 90%
Network Solution Provider
High-Speed, Long distance Ethernet and PoE Extender over CoaxEPR-101 / 111Ethernet & PoE Repeater
Dimension
�T�O�P �V�I�E�W
83
8283 28
Dimension
�T�O�P �V�I�E�W
66.4
88.4
68.4
40
.9
23.7
21.8
EPR-111
EPR-101 EPR-101
130mCat.5e
100mCat.5e
100mCat.5e
130mCat.5e
NVR Network PoE Switch
200mCat.5e
200mCat.5e
PoECamera
PoECamera
PoE
DataPoE
Data
Po
E
Data
Po
E
Dat
a
PoE
Data
PoE
Data
Specification
ConnectionDiagram
* Transmission distance may vary depending on the type and quality of cable, camera and environmental condition
Page 22 of 26
Applications
Network Solution Provider
High-Speed, Long distance Ethernet and PoE Extender over Coax
4 Port Ethernet over Coax Transmitter configuration
4 Port Ethernet over Coax Receiver configuration
Coax / UTP / 2-Wire Communication
Page 23 of 26
ECP-2701ECP-2701
Cat.5e or Better
UTP cablePoE
Data EoC
PoC
PoECamera
ECP-2701ECP-2701
56V DC/1.2A Power Supply
RG58, RG59, RG6, RG11
Coaxial cablePoE
Data EoC
PoC
ECP-2701ECP-2701Power Line, COM Line
2 WirePoE
Data
Data
Data
DataEoC
PoC
Network SwitchNVR
PoECamera
PoECamera
(Optional)56V DC/1.2A Power Supply
100m
ECP-2704T
ECP-2701
RG-6 Coaxial cable
2,400m
Cat.5e
100m
Cat. 5e
56V DC/1.2A Power Supply
PoE
Data
DataEoC
PoC
Network SwitchNVR
PoECamera
(Optional)56V DC/1.2A Power Supply
ECP-2701
ECP-2701
ECP-2701
ECP-2701
ECP-2704R
56V DC/1.2A Power Supply
Cat. 5e
100m
RG-6 Coaxial cable
600m
PoE
Data EoC
PoC
Network SwitchNVR
PoECamera
Applications
Network Solution Provider
High-Speed, Long distance Ethernet and PoE Extender over Coax
4:1 Daisy Chain Connection with T-Splitter
4:1 Connection with 1:4 BNC Splitter
Page 24 of 26
(Optional)56V DC/1.2A Power Supply
PoE
Data
Data
100mCat. 5e RG-6 Coaxial cable
600m
100m 600m
100m 600m
100m 600m
EoC
PoC
Network SwitchNVR
ECP-9501T
56V DC/1.2A Power Supply
Cat. 5e
100m
ECP-9501T 200m
200m
200m
200m
ECP-9501T
ECP-9501T
ECP-9501T
PoECamera
(Optional)56V DC/1.2A Power Supply
Data
PoE
Data EoC
PoC
Network SwitchNVR
ECP-9501T
56V DC/1.2A Power Supply
ECP-9501T
100m
Cat.5e
100m
RG-6 Coaxial cable
600m100m
600m
100m 600m
100m600m
ECP-9501T
ECP-8301T
ECP-8401T
PoECamera
Applications
Network Solution Provider
High-Speed, Long distance Ethernet and PoE Extender over Coax
2:1 High Power Camera Connection with T-Splitter
16 Port Receiver Configuration
Page 25 of 26
Network SwitchNVRCat. 5e
100m
ECP-9501T
ECP-9501T
56V DC/1.2A Power Supply
100m
Cat.5e
600m
RG-6 Coaxial cable
ECP-9501T 56V DC/1.2A Power Supply
100m
Cat.5e
600m
RG-6 Coaxial cable
EoC
PoCPoE
Data
Data
30WattPoE Camera
30WattPoE Camera
AC 110~220V
ECP-9516R
7
6
5
3
2
1
ECP-8401T
15
14
13
11
10
9
Cat.5e RG-6 Coaxial cable
600m100m
Cat.5e
100m
ECP-9501T
Network SwitchNVR
7WattPoE Camera
7WattPoE Camera
ECP-8301T
PoE
Data EoC
PoC
7WattPoE Camera
DC Adapter(12V)
ECP-8301R
30WattPoE Camera
AC 110~220V
Applications
Network Solution Provider
High-Speed, Long distance Ethernet and PoE Extender over Coax
Extended distance by repeating
Data + PoE over Coax Configuration
Network connectivity for Various IP devices
Page 26 of 26
PoE
Data
Data
ECP-8301T
ECP-8301T
RG-6 Coaxial cable
1,200m
RG-6 Coaxial cable
1,200m
Cat.5e
100m
Cat.5e
100m
EoC
PoC
EoC
PoC
Data
Network Switch NVR
ECP-8301R
ECP-8301R
56V DC/1.2A Power Supply
56V DC/1.2A Power Supply
7WattPoE Camera
Cat.5e / 100m
PoE Switch
EoC
PoC
Data Data
PoE
PoE
PoE
PoE
Network SwitchNVR
RG-6 Coaxial cable
2,400m
Cat.5e
100m
ECP-8301T
ECP-8301R
56V DC/1.2A Power Supply
Cat.5e
100m
Network SwitchNVR
ECP-8301T
ECP-8301T
ECP-8301R
ECP-8301T/R
56V DC/1.2A Power Supply
PoE
Data EoC
PoC
EoC
PoC
RG-6 Coaxial cable
1,200m
RG-6 Coaxial cable
200m
Cat.5e
100m
Data
Cat.5e
100m
7WattPoE Camera
30WattPoE Camera
DC Adapter(12V)
Intercoax World Partners
51 Simin-daero 365beon-Gil, Dongan-Gu, Anyang-Si,
Gyeonggi-Do, Korea 14057
TEL : +82-31-365-3133 FAX : +82-31-365-3135
For all general requests: [email protected] all Asia Pacific requests : [email protected] all EMEA requests : [email protected] For all North America requests : [email protected]