Pipes NSMAXTM-GR & Tubes Connection
2
Pipes & Tubes NSMAX TM -GR Connection www.nipponsteel.com 2-6-1 Marunouchi, Chiyoda-ku,Tokyo 100-8071 Japan Tel: +81-3-6867-4111 NSMAX TM -GR Connection P111en_01_201904f © 2019 NIPPON STEEL CORPORATION Notice: While every effort has been made to ensure the accuracy of the information contained within this publication, the use of the information is at the reader’s risk and no warranty is implied or expressed by NIPPON STEEL CORPORATION with respect to the use of the information contained herein. The information in this publication is subject to change or modification without notice. Please contact the NIPPON STEEL CORPORATION office for the latest information.Please refrain from unauthorized reproduction or copying of the contents of this publication.The names of our products and services shown in this publication are trademarks or registered trademarks of NIPPON STEEL CORPORATION, affiliated companies, or third parties granting rights to NIPPON STEEL CORPORATION or affiliated companies. Other product or service names shown may be trademarks or registered trademarks of their respective owners.
Transcript of Pipes NSMAXTM-GR & Tubes Connection
www.nipponsteel.com Pipes& Tubes
2-6-1 Marunouchi, Chiyoda-ku,Tokyo 100-8071 JapanTel: +81-3-6867-4111
NSMAXTM-GR ConnectionP111en_01_201904p
© 2019 NIPPON STEEL CORPORATION
NSMAXTM-GRConnection
Notice: While every effort has been made to ensure the accuracy of the information contained within this publication, the use of the information is at the reader’s risk and no warranty is implied or expressed by NIPPON STEEL CORPORATION with respect to the use of the information contained herein. The information in this publication is subject to change or modification without notice. Please contact the NIPPON STEEL CORPORATION office for the latest information.Please refrain from unauthorized reproduction or copying of the contents of this publication.The names of our products and services shown in this publication are trademarks or registered trademarks of NIPPON STEEL CORPORATION, affiliated companies, or third parties granting rights to NIPPON STEEL CORPORATION or affiliated companies. Other product or service names shown may be trademarks or registeredtrademarks of their respective owners.
www.nipponsteel.com Pipes& Tubes
2-6-1 Marunouchi, Chiyoda-ku,Tokyo 100-8071 JapanTel: +81-3-6867-4111
NSMAXTM-GR ConnectionP111en_01_201904f
© 2019 NIPPON STEEL CORPORATION
NSMAXTM-GRConnection
Notice: While every effort has been made to ensure the accuracy of the information contained within this publication, the use of the information is at the reader’s risk and no warranty is implied or expressed by NIPPON STEEL CORPORATION with respect to the use of the information contained herein. The information in this publication is subject to change or modification without notice. Please contact the NIPPON STEEL CORPORATION office for the latest information.Please refrain from unauthorized reproduction or copying of the contents of this publication.The names of our products and services shown in this publication are trademarks or registered trademarks of NIPPON STEEL CORPORATION, affiliated companies, or third parties granting rights to NIPPON STEEL CORPORATION or affiliated companies. Other product or service names shown may be trademarks or registered trademarks of their respective owners.
NSMAXTM-GRNSMAXTM-GRNSMAXTM-GR : optimizing your wells Total Cost SavingsFast Running Reliable Performance
Rig Time Saving• Lesser galling susceptibility versus older connection designs in this segment
• Low risk of cross threading (= stable stabbing)
• Low probability of having to break out / re- make up, results in faster running
Well Integrity• Cost effective thread and coupled connection option for critical well application
• API 5C5 2017 Cal-Ⅰvalidated using 194 deg F. baking temperature + 2,000psi internal Gas Test
• Good SAF (Stress Amplification Factor) performance
Validated for gas sealing
Liquid
2,000psiGas
Tension
InternalPressure
ExternalPressure
Compression
100% VME
NT-95DE Collapse curveAPI 5C3 Collapse curve
Designed domain For gas sealing
-3˚ 10˚
30˚
A BC
Type
Threads / inch
ControlledClearance
Stepped tapered thread
A
BSealability
C
Stabbingangle
10 deg.
No jump-out
Quick make-up
Nocross-threading
Compression(PBYS100%)
Load angle
30 deg.
-3 deg.
3Tensile:
Compression:Internal pressure:External pressure:
100% PBYS100% PBYS100% VMEExceeding API 5C3API Collapse ratingfor NT-95DE
BOX
PIN
94.00105.00117.00119.00128.00
87.5094.5096.50
101.00106.00109.40112.00115.00122.00136.00
94.00106.50117.00133.00144.00
inch lbs/ft inch inch inch inch inch inch sqin.
18
18 5/8
20
0.5000.5620.6250.6400.6880.4350.4680.4860.5100.5310.5630.5790.5940.6360.6930.4380.5000.5630.6350.693
16.81216.68816.56216.53216.50017.56717.50117.50017.50017.37517.31117.27917.24917.16517.05118.93618.81218.68618.54218.500
★
★★
★
0.0280.0310.0350.0360.0380.0230.0250.0260.0270.0290.0300.0310.0320.0340.0370.0220.0250.0280.0320.035
WeightOD Wall drift t/D
18.93718.93719.05519.05519.05519.62619.62619.62619.62619.62619.62620.00020.00020.00020.00021.00021.00021.00021.06321.063
17.00016.87616.75016.72016.62417.75517.68917.65317.60517.56317.49917.46717.43717.35317.23919.12419.00018.87418.73018.614
5.5495.5496.2526.2526.2525.6145.6145.5495.5495.5495.5496.2526.2526.2526.2525.6615.5965.5966.3156.315
12.28012.28013.68513.68513.68512.40912.40912.28012.28012.28012.28013.68513.68513.68513.68512.50412.37412.37413.81113.811
27.48930.78834.11634.90437.41824.85826.69627.69529.02430.18431.94732.82533.64835.94339.04026.91830.63134.37938.63142.034
2
3
1
2
3
1
2
3
2,6112,9253,2413,3163,5552,3622,5362,6312,7572,8673,0353,1183,1973,4153,7092,5572,9103,2663,6703,993
klbs2,6112,9253,2413,3163,5552,3622,5362,6312,7572,8673,0353,1183,1973,4153,7092,5572,9103,2663,6703,993
klbs4,8805,4906,1006,2506,7204,1004,4204,5904,8105,0105,3105,4605,6106,0006,5403,8504,3904,9505,5806,090
psi1,3001,8102,4502,6103,180
790970
1,0801,2501,4001,6501,7901,9302,3402,960
650960
1,3501,9002,430
psi28,30031,30040,10041,00043,60027,70027,90028,10029,40030,50032,10043,50044,60044,60045,20030,70031,00034,40045,00045,300
ft.lbs1,5121,6931,8761,9202,0581,3671,4681,5231,5961,6601,7571,8051,8511,9772,1471,4801,6851,8912,1252,312
klbs1,5121,6931,8761,9202,0581,3671,4681,5231,5961,6601,7571,8051,8511,9772,1471,4801,6851,8912,1252,312
klbs2,8303,1803,5303,6203,8902,3802,5602,6602,7902,9003,0803,1603,2503,4703,7902,2302,5402,8603,2303,530
psi1,0601,4401,8201,9102,200
630780880
1,0201,1401,3301,4201,5101,7602,090
520770
1,1001,5001,810
psi ft.lbs
Tensileyield
strength
Compressiveyield
strength
Internalyield
pressure
Connection performance of J55( min. SMYS: 55 ksi, min. wall factor: 92.5% )
External(collapse)presure
Opt.make-uptorque
17,30019,10026,50027,10028,80016,50016,60017,30018,10018,80019,70025,50026,20028,10030,40017,50018,50020,60029,30031,600
Tensileyield
strength
Criticalcross
section
Couplinglength
Make-uploss
ConnectionID
(nom)
ConnectionOD
(nom)Group
Compressiveyield
strength
Internalyield
pressure
Connection performance of NT-95DE( min. SMYS: 95 ksi, min. wall factor: 92.5% )Connection dimension
External(collapse)presure
Opt.make-uptorque
★ special drift
NIPPON STEEL CORPORATION
