Ω OPTIMIZED BNC CABLE ASSEMBLIES - Farnell … ±3pF/meter Max Attenuation (cable only): 0.21dB @...
Click here to load reader
Transcript of Ω OPTIMIZED BNC CABLE ASSEMBLIES - Farnell … ±3pF/meter Max Attenuation (cable only): 0.21dB @...
RFA6T, RFB6T SERIES
3G SDI optimized True 75Ω terminations
18 AWG 75Ω RG 6 coax cable, or 1694A Belden cable
RFA6T–74SP3–74SP3–0300
WWW.SAMTEC.COM
For complete specifi cationssee www.samtec.com?RFA6T or www.samtec.com?RFB6T
RF Connector:Outer Contact Material: Ni plated Brass (BNC),Au plated BeCu (DIN), Au plated Phosphor Bronze (HDBNC)Center Contact Material: Gold plated BrassInsulator Material: PTFEOperating Temperature: -65°C to +125°CImpedance: 75Ω ± 3Ω (–STST)75Ω ± 4Ω (–RARA)Frequency Range: 0~3.5 GHz * Working Voltage: 500 Vrms max *Dielectric Withstanding: 1500 Vrms min *Contact Resistance: Center Contact: 1,5mΩ maxOuter Contact: 0,4mΩ maxRoHS Compliant: Yes
RG 6/1694A Cable: Impedance: 75Ω ±3ΩCapacitance: 54 ±3pF/meterMax Attenuation (cable only): 0.21dB @ 1GHz for 1 meterConductor Size:18 AWG, (1,02 mm) .040" dia.Conductor Material: Bare CopperInsulator Material: Gas Injected Foamed PolyethyleneShield Material:Tinned Copper Braid over Aluminum Foil WrapJacket Material: PVCJacket Diameter: (7,00 mm) .275"Jacket Color: Black RoHS Compliant: Yes
RF-13
SPECIFICATIONS Mates with: BNC7T, DIN7A, HDBNC
CABLE TYPE
END 1 CONNECTOR
OVERALL LENGTH
–“XXXX”= Overall Length
in millimeters –0300 (300 mm) 11.81" minimum
END 2 CONNECTOR
RFA6T= RG 6 Cable
RFB6T = Belden
1694A Cable
Specify END OPTIONS from chart
75Ω OPTIMIZED BNC CABLE ASSEMBLIES
* See connector component pages for specifi c range.
STRIPPED & TINNED (Dimensions in mm)
Both center conductor and braid shield are stripped,
only the centerconductor is tinned.
CALLOUT A B C–303030 3.0 3.0 3.0–303040 3.0 3.0 4.0–403030 4.0 3.0 3.0–403040 4.0 3.0 4.0–404040 4.0 4.0 4.0
XXXX = OAL (millimeters)
–74SP3–78SP4 SHOWN
THINK OUTSIDE THE CATALOG
• Create a full system: cable assembly and board level mates, 50Ω and 75Ω solutions
• 24-hour samples on standard products
• Visit: rf.samtec.com
• Hand tool available.Contact [email protected]
• Cable connector kits (see cable components catalog pages)
OTHER SOLUTIONS
ALSO AVAILABLE(MOQ Required)
• Additional stripping and tinning options
• Additional plating options
Contact Samtec.
END OPTIONS
–H4SP3 = 75Ω High Density BNC Straight Plug
(10µ" (0,25 µm) Gold on Center Contact, Nickel on Shell)
–78SP4 = 75Ω DIN Straight Plug
(10µ" (0,25 µm) Gold on Center Contact, Nickel on Shell)
–74SP3* = 75Ω BNC Straight Plug
(10µ" (0,25 µm) Gold on Center Contact,
Nickel on Shell)
(*Die Cast also available = –D4SP3)
END OPTIONS
–74RP3 = 75Ω BNC Right Angle Plug (10µ" (0,25 µm)
Gold on Center Contact, Nickel on Shell)
–SING = Single Ended(End 2 callout)
–XXXXXX = Stripped & Tinned
(End 2 callout)(See chart for callout)
ABC