ΠΡΟΣ: Όλα τα Μέλη Σας επισυνάπτo · Λεωφ. Γρίβα Διγενή 38 &...

Λεωφ. Γρίβα Διγενή 38 & Δεληγιώργη 3, 1066, Τ.Θ 21455, 1509 Λευκωσία, Κύπρος T: +357 22889800 F: +357 22669048 E: [email protected] W: www.ccci.org.cy

Λευκωσία, 13 Μαρτίου 2020 ΠΡΟΣ: Όλα τα Μέλη

Κυρία/ε, Σας επισυνάπτoυμε γνωστοποιήσεις από Εθνικούς Οργανισμούς Τυποποίησης, μελών των Ευρωπαϊκών Οργανισμών Τυποποίησης CEN/CENELEC, που περιέχουν τους τίτλους προτεινόμενων εθνικών προτύπων. Σύμφωνα με την Ευρωπαϊκή Οδηγία που αφορά την πληροφόρηση σε θέματα τεχνικών προτύπων, μπορείτε, αφού μελετήσετε τους τίτλους: α) να ζητήσετε όπως λάβετε ηλεκτρονικά ολόκληρο το κείμενο του προσχεδίου εθνικού προτύπου, εάν αυτό είναι διαθέσιμο, β) να συμμετάσχετε στις συναντήσεις της τεχνικής επιτροπής του Εθνικού Οργανισμού Τυποποίησης που ετοιμάζει το προσχέδιο προτύπου και γ) να υποβάλετε εισήγηση στον CYS, να αρχίσει τυποποιητική εργασία σε Ευρωπαϊκό επίπεδο σχετικά με το θέμα της γνωστοποίησης, εάν φυσικά πιστεύετε ότι το εν λόγω εθνικό πρότυπο θα επηρεάσει την ελεύθερη διακίνηση προϊόντων, υπηρεσιών ή την κυπριακή βιομηχανία και οικονομία. Τυχόν σχόλια και παρατηρήσεις παρακαλώ όπως υποβάλλονται στον Κυπριακό Οργανισμό Τυποποίησης. Σε περίπτωση που δε λάβουμε καμία ανταπόκριση, ο CYS δε θα φέρει ένσταση στην προώθηση των υπό αναφορά εθνικών προτύπων. Για περισσότερες πληροφορίες μπορείτε να επικοινωνείτε με την κα. Μαριλένα Νικολάου, Λειτουργό Διοίκησης και Διεθνών Σχέσεων του Κυπριακού Οργανισμού Τυποποίησης (CYS), τηλ: 22 411439, Φαξ. 22 411511 και στην ηλεκτρονική διεύθυνση: [email protected] Με εκτίμηση, Ανδρέας Ανδρέου, Διευθυντής Τμήματος Βιομηχανίας, για Γενικό Γραμματέα. /ΜΚ.

mailto:[email protected]

http://www.ccci.org.cy/

mailto:[email protected]

Information procedure Page 1

Monthly Notifications Register

Notifications registered at CCMC from 2020-02-01 to 2020-02-29

Register issued on : 2020-03-06

A list of subsectors can be found at the end of this document.




Sector B : BUILDING AND CONSTRUCTION


Subsector B01: FIRE PROTECTION

Subsector : B01 Registration Date : 2020-02-04Organization : AFNORCountry : France

Project ID : 00218206/0001 Project Established

ICS :National Ref : PR NF S61-701Title : Firefighting and rescue service equipment - Fire hose couplings - Safety and

performance

Relatedness :National : New



ICS :National Ref : PR NF S61-515/A1Title : Firefighting and rescue service vehicles - Firefighting and rescue appliances - Urban

pumping appliances (VPI/FPTL/FPT/FPTLSR/FPTSR)




ICS :National Ref : PR NF S61-510/A1Title : Firefighting and rescue service vehicles - Requirements for common elements




ICS :National Ref : PR NF S61-517/A1Title : Fire fighting and rescue service vehicules - Rescue and extinguishing vehicles - Rural

water tanks




ICS :National Ref : PR NF S61-941Title : Fire safety systems (FSS) - Operating repeater equipments


Subsector : B01 Registration Date : 2020-02-26Organization : UNICountry : Italy


ICS : 13.220.10, 23.040.40National Ref : UNI1607479Title : Fixed firefighting systems — Automatic sprinkler systems — Guidance for earthquake

bracingScope : This document specifies requirements for earthquake protection of automatic sprinkler

systems in accordance with EN 12845. This document applies only to locations in earthquake zones in accordance with EN 1998-1:2004 + AC:2009, 3.2.1 and for areas subject to peak groundaccelerationabove9%ofg.This document does not cover all legislative requirements. In certain countries specific national regulations apply and take precedence over this document. Users of this document are advised to inform themselves of the applicability or non-applicability of this document by their national responsible authorities.


Subsector : B01 Registration Date : 2020-02-14Organization : DINCountry : Germany


ICS :National Ref : 11904518Title : Codes of practice for drinking water installations - Part 600: Drinking water installations in

connection with fire fighting and fire protection installations


Subsector : B01 Registration Date : 2020-02-11Organization : NENCountry : Netherlands


ICS : 13.220.20National Ref : NEN 2555:2020 Concept nl

Title : Fire safety in buildings - Smoke alarms for dwellingsScope : NEN 2555 contains specifications for non-ionizing smoke alarms applicable in dwellings.

Purpose of these smoke alarms is to alarm persons in the dwellings from smoke development by acoustic signals.


** End of Subsector **

Subsector B02: STRUCTURES



ICS :National Ref : PR NF P30-316Title : Roofing and wall cladding - Fasteners - Determination of the characteristic resistance of

the assembly - Test method for shearing by transverse tensile testing




ICS :National Ref : 00518823Title : Areas and volumes of buildings - Part 1: Building construction


Subsector : B02 Registration Date : 2020-02-11Organization : NENCountry : Netherlands


ICS : 91.010.30, 91.080.01National Ref : NPR 6766:2020 Concept nlTitle : Corrosion steel structures in the subsoil Scope : NPR 6766 contains guidelines for the design and construction of constructive steel elements

in the subsoil in relation to corrosion. The purpose of this code of practice is to make such a construction possible that corrosion will not lead to an unsafe or unusable construction within the reference period.



Subsector B03: CONCRETE

Subsector : B03 Registration Date : 2020-02-11Organization : UNECountry : Spain Latest Date for Comments : 2020-03-22

Project ID : P0052958/0001 Draft for public enquiry

ICS :National Ref : PNE 127916Title : Concrete pipes and fittings, unreinforced, steel fibre and reinforced. National AnnexScope : This National Annex complements the European Standard EN 1916:2008 which specifies

performance requirements and describes test methods for precast concrete pipes and fittings, unreinforced, steel fibre and reinforced, for use in pipelines with flexible joints.

Relatedness :National : REV/AMD UNE 127916:2017


Subsector B08: DOORS AND WINDOWS

Subsector : B08 Registration Date : 2020-02-24Organization : ASICountry : Austria


ICS :91.010.30, 91.060.10, 91.060.50, 91.090

National Ref : ÖNORM B 5320Title : Installation of windows and doors in walls - Design and execution of the building

connection as well as of the joint for windows and/or doorsScope : This Austrian Standard shall be applied to the design and execution for fitting of windows,

door height windows and external doors in conditioned and non-conditioned buildings or building parts being in direct contact to external climate. Furthermore, this Standard also appliestothefittingofwindowsbetweenconditionedandnon-conditionedrooms.This Austrian Standard applies to new construction, rehabilitation as well as to the exchange ofwindows.The present ÖNORM neither covers repair and/or reconstruction of existing windows. Moreover,thepresentÖNORMisnotapplicabletoroofwindows,rooflights,etc.Forfireprotectionrequirements,theapplicabilityhastobecheckedforeachspecificcase.This Standard does not deal with connection joints within coupled window constructions; these have to fulfil the requirements of ÖNORM B 5300.




ICS :91.010.30, 91.060.10, 91.060.50, 91.090

National Ref : ÖNORM B 5321Title : Fitting of windows and doors in walls - Test method

Scope : This Austrian Standard shall be applied jointly with ÖNORM B 5320 to the testing of installation of windows, French doors and external doors, including exterior mounting parts (e.g. sun and insect screens and/or ventilation appliances) in walls wich are in direct contact to external climate. Furthermore, this Standard also applies to the installation of windows between rooms with and without air condition. This ÖNORM applies to new buildings, to rehabilitationofbuildingsaswellastoexchangeofwindows.Hereinafter,windows,Frenchdoorsandexternaldoorsarereferredtoas¿windows¿.The present ÖNORM does not apply to repair and/or reconstruction of existing windows as well as to activities in the field of monument protection. Moreover, the present ÖNORM does not cover roof windows, rooflights, façades and the like.



Subsector B09: THERMAL MATTERS

Subsector : B09 Registration Date : 2020-02-28Organization : EVSCountry : Estonia


ICS : 27.220, 91.120.10National Ref : prEVS 860Title : Thermal insulation of technical equipment - Insulation of pipes, vessels and equipment -

Application of thermal insulationScope : This standard describes insulation of pipes, tanks and equipment, if mineral wool is used as

an insulation material and sheet metal for cladding. If applicable, it can be used in other cases as well.




ICS : 27.220, 91.120.10National Ref : prEVS 860-1Title : Thermal insulation of technical equipment - Part 1: Insulation of pipes, vessels and

equipment - Insulationg materials and elementsScope : This standard is one part of "Thermal insulation of technical equipment" series, which is

made for engineers, contructors, but also for customers. This standard describes the basic information needed for the planning and implementation of insulation.


Subsector : B09 Registration Date : 2020-02-28Organization : EVSCountry : EstoniaProject ID : 00108207/0001 Project

EstablishedICS : 27.220, 91.120.10National Ref : prEVS 860-6Title : Thermal insulation of technical equipment - Part 6: Insulation of pipes, vessels and

equipment - Cold insulationScope : This standard is one part of "Thermal insulation of technical equipment" series, which is

made for engineers, constructors and customers. This standard presents the most essential factors to be observed in the design, application of insulation and choice of materials for cold insulations.


Subsector : B09 Registration Date : 2020-02-27Organization : UNMS SRCountry : Slovakia


ICS : 91.100.60National Ref : STN 72 7221-2Title : Thermal insulation products for building applications. Part 2: Factory made products of

expanded polystyrene (EPS). Intended useScope : The revised standard will define intended use, control, storage and disposal of expanded

polystyrene products. It will define the utmost values for the intended use.

Relatedness :National : REV/AMD STN 72 7221-2


Subsector B12: MASONRY



ICS :National Ref : 00518822Title : Application of building products in structures - Part 402: Rules for the application of

calcium silicate masonry units according to DIN EN 771-2:2015-11; Amendment 1



Subsector B14: GEOTECHNICS



ICS :National Ref : NF P94-282/A2

Title : Geotechnical design - Retaining structures - Embedded walls - Amendment 2




ICS :National Ref : 00517641Title : Engineering geodesy - Part 1: General requirements




ICS :National Ref : 00517643Title : Engineering geodesy - Part 3: Setting out



Subsector B15: SANITARY APPLIANCES



ICS :National Ref : PR NF D14-505Title : Sanitary appliances - Aspect checking of enamelled surfaces - Test method




ICS :National Ref : PR NF D11-201/A1Title : Household management - Conditions of assembly and installation of wash basins for

accomodating handicapped persons




ICS :National Ref : PR NF D12-210Title : Sanitary appliances - Synthetic material toilet wash-basins and surfaces




ICS :National Ref : PR NF D11-201Title : Household management - Conditions of assembly and installation of wash basins for

accomodating handicapped persons




ICS :National Ref : PR NF D11-101Title : Sanitary appliances - Sanitary ceramic wash basins




ICS :National Ref : PR NF D11-107Title : Sanitary appliances - Sanitary ceramic bidets



Subsector B18: SCAFFOLDING



ICS :National Ref : PR NF P93-551/A1Title : Building site equipment - Load bearing towers - Technical specifications - Calculations -

Tests


Subsector : B18 Registration Date : 2020-02-28Organization : BSICountry : United Kingdom


ICS :National Ref : BS 1139-6Title : Metal scaffolding. Prefabricated tower scaffolds outside the scope of BS EN 1004, but

utilizing components from such systems. Specification



Subsector B20: DRAINAGE EQUIPMENT



ICS :13.060.30, 91.010.30, 91.140.80

National Ref : prEVS 846Title : Draining system inside buildingsScope : This standard applies to property sewer system, through which the waste water flows into

the city or town public sewerage or recipient. Property sewer system consists of buildings sewer system, together with the equipments (blocking devices, pumping stations, treatment manholes) and inside property situated system within the manholes and local treatment systems. Standard does not deal with water supply for firefighting. Standards must be followed in the design, installation, testing and re-construction of existing sewage systems.




ICS :13.060.30, 91.010.30, 91.140.80

National Ref : prEVS 848Title : Sewer systems outside buildingsScope : This standard applies to the design of outside building self-flowing sewage networks, this

means sewer systems from building or from storm water gully up to treatment plant. Sewer piping and manifolds installed under buildings are included in the network when they are not part of site sewer system.



Subsector B25: GAS DISTRIBUTION INSTALLATION AND RELATED EQUIPMENT

Subsector : B25 Registration Date : 2020-02-21Organization : LVS Draft Issue Date : 2020-02-24Country : Latvia Latest Date for Comments : 2020-04-24

Project ID : 00058991/0001 Draft for public enquiry

ICS : 75.200National Ref : prLVS 1059Title : Gas regulating equipment with inlet pressure of up to 1,6 MPa (16 bar)Scope : Standard requirements are applicable to the design, construction, installation, inspection,

commissioning and operation of natural gas regulating equipment with inlet pressure of up to 1,6 MPa (16 bar)


Subsector : B25 Registration Date : 2020-02-21Organization : LVS Draft Issue Date : 2020-02-25Country : Latvia Latest Date for Comments : 2020-04-24


ICS : 75.200National Ref : prLVS 1060Title : Distribution gas pipeline systems. Increasing pressure in existing gas pipelinesScope : This standard is applicable to pressurized pipelines in service. The standard describes the

requirements that must be met by raising the pressure in the distribution system gas pipelines above the pressure used hitherto




ICS :National Ref : PR NF E29-190-1Title : Gas pressure regulators for distribution netwoks and service lines - Part 1 : type C

Regulators




ICS :National Ref : PR NF E29-190-2Title : Gas pressure regulators for distribution networks and service lines - Part 2 : type B

regulators




ICS :National Ref : 03200866Title : Excess flow valves - Part 3: Conformity assessement of excess flow valves for gas

installation



Subsector B26: ROAD BUILDING AND MAINTENANCE



ICS : 91.100.15, 93.080.20National Ref : prEVS 901-1Title : Road construction - Part 1: Aggregates for bituminous mixturesScope : This Standard specifies requirements for the properties of natural and artificial aggregates

and fillers used in asphalt mixtures and surface dressing works in Estonia, considering local road construction and maintenance conditions and practical experience.



Subsector B27: WATERPROOFING MATERIALS



ICS :National Ref : PR NF P34-503-2Title : Profiled sheeting made of coated or non-coated steel sheet and panels - Part 2: Tests

according to Eurocodes




ICS :National Ref : PR NF P34-503-1Title : Profiled sheeting made of coated or non-coated steel sheet and panels - Part 1: Bending

tests under linear loads and/or under concentrated loads



Subsector B99: UNDETERMINED



ICS : 91.010.01, 91.040.01National Ref : ÖNORM B 1801-1Title : Projekt and object management in construction - Part 1: Object constructionScope : This Austrian Standard is applicable to planning and structuring of quality, costs, deadlines as

well as for the classification of documentation for construction activities during the phases of conception, planning and installation. The action area quality includes quality and quantity; costs cover costs and financing; deadlines involve dates and resources. Quality, costs and deadlines are discussed in this Austrian Standard. For the planning and structuring of processing of quantity, funding and resources relevant existing standards and guidelines shall apply. The planning and structuring system in this Austrian Standard and the explained classification systems focus primarily the field of building construction. To meet specific requirements of individual construction segments (eg. traffic infrastructure) additions and adjustments of the planning system and structure systems are allowed.




ICS : 91.040.01, 91.080.01National Ref : ÖNORM B 1801-6Title : Projekt and object management in construction - Part 6: Facilities labeling systemScope : This Austrian Standard regulates the function, product and location-related marking of

technical objects and their documentation in the area of buildings, including technical building equipment. It specifies rules for structuring and specifies code letter tables for various flag blocks and respective outline levels. It specifies the specifications for the unique identification of a plant.



** End of Sector **




Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS


Subsector C01: Food products

Subsector : C01 Registration Date : 2020-02-26Organization : AFNORCountry : France


ICS :National Ref : NF V04-155Title : Milk and milk products - Determination of fat content of sheep milk - Acido-butyrometric

method

Relatedness :National : REV/AMD NF V04-155 2003-12-01 00:00:00.0

Subsector : C01 Registration Date : 2020-02-26Organization : AFNORCountry : France


ICS :National Ref : PR NF V01-006Title : Hygiene of food products - Place of the HACCP system and application of its principles

for controllling the safety of food and animal feeding stuffs


Subsector : C01 Registration Date : 2020-02-26Organization : UNICountry : Italy


ICS : 67.020National Ref : UNI1607481Title : Food safety - Validation of operational prerequisite programs (PRPo)Scope : This standard provides the general criteria for the definition of principles and methodologies

for the predisposition of procedures for the validation of operational prerequisite programs (PRPo).


Subsector : C01 Registration Date : 2020-02-14Organization : DINCountry : Germany


ICS :National Ref : 05702305Title : Apparatus for dairy analyses - Butyrometer for milk and milk products




ICS :National Ref : 05702306Title : Apparatus for dairy analyses - pipettes for the milk butyrometer




ICS :National Ref : 05702311Title : Determination of surface colony count on fitment and utensils along the food chain - Part

2: Semiquantitative method with culture media laminated taking up equipment (squeeze method)



Subsector C02: PAINTS AND RELATED PRODUCTS



ICS :National Ref : 07800665Title : Dyestuffs - Determination of non-readily soluble matter in solvents



Subsector C13: FERTILIZERS

Subsector : C13 Registration Date : 2020-02-24Organization : ASICountry : Austria


ICS : 65.080National Ref : ÖNORM S 2021

Title : Growing media - Quality requirements and test methodsScope : This ÖNORM regulates quality requirements and test methods for growing media that are

placed on the market according to the Fertilizer Ordinance of 2004. It specifies the requirements to be met by growing media. The aim is to achieve an optimal plant growth when used as recommended these products.



Subsector C17: TREES AND PLANTS

Subsector : C17 Registration Date : 2020-02-24Organization : SIS Draft Issue Date : 2020-02-24Country : Sweden Latest Date for Comments : 2020-04-24


ICS : 07.080National Ref : 990000Title : Tree care - Terms and definitionsScope : This document defines terms used in a procurement and execution process for tree care,

treecareservices,treemaintenanceandrenewaloftreestocks.Thisdocumentcoversterminologyfor:-descriptionoftrees,-featuresoftrees,-pruningandotherorderablemeasures,-treeinspection,-conservation,-riskassessment;-injuries,-measures.Terminology for tree biology, soil work and nursery-related terms are not included.



Project ID : 990001-1/0001 Project Established

ICS : 07.080National Ref : 99001-1Title : Tree care — Processes and methods for tree pruning — Part 1: Requirements for clientsScope : This document specifies requirements for clients of tree pruning services in environments

where they are managed on an individual level in order to ensure function, safety and aesthetics. This standard also describes the processes and measures for pruning and how theyareperformedcorrectly.This document is not intended to be used for the pruning of roots, shrubs, or trees managed forproductionpurposes,forexample,fororchardsandnurseries.Note: Execution requirements are specified in ftSS 990001-2: 2020.



Project ID : 990001-2/0001 Project Established

ICS : 07.080National Ref : 99001-2Title : Tree care — Processes and methods for tree pruning — Part 2: Requirements for

providersScope : This document specifies requirements for tree pruning service providers in environments

where they are managed at the individual level in order to ensure function, safety and aesthetics. This standard also describes the processes and measures for pruning and how theyareperformedcorrectly.This document is not intended to be used for the pruning of roots, shrubs, or trees managed forproductionpurposes,forexample,fororchardsandnurseries.Note: Order requirements are specified in ftSS 990001-1: 2020.



** End of Sector **




Sector F : FUNDAMENTAL STANDARDS


Subsector F05: MEASURING INSTRUMENTS

Subsector : F05 Registration Date : 2020-02-14Organization : DINCountry : Germany


ICS :National Ref : 06004002Title : Automatic gravimetric filling instruments - Metrological and technical requirements - Tests



Subsector F07: DOCUMENTATION AND INFORMATION

Subsector : F07 Registration Date : 2020-02-26Organization : AFNORCountry : France


ICS :National Ref : XP Z 42-105Title : Electronic Storage Specifications for use of an Visible Digital Seal (VDS) for the

authentication, verification and acquisition of data carried by a document or object.



Subsector F08: SURFACES



ICS :National Ref : PR NF E 04-008Title : Geometrical Product Specifications (GPS) - Tolerance allocation method, indications and

acceptance criteria - Methods based on arithmetics, quadratic, semi-quadratic and inertial statistics




ICS :National Ref : PR NF E 03-110

Title : Geometrical product specification (GPS) - Screw threads - Direct measuring methods




ICS :National Ref : PR NF E10-100-1Title : Geometrical product specification (GPS) - Dimensional measuring methods - Part 1 :

General conditions of measurement



Subsector F12: INFORMATION PROCESSING SYSTEMS



ICS :National Ref : PR NF P99-508Title : Daily life Services - Citizen Multiservices Application - CMA


Subsector : F12 Registration Date : 2020-02-28Organization : BSICountry : United Kingdom


ICS :National Ref : BS 7666-2Title : Spatial datasets for geographical referencing.. Part 2: Specification for a land and

property gazetteer


Subsector : F12 Registration Date : 2020-02-28Organization : BSICountry : United Kingdom


ICS :

National Ref : BS 7666-0Title : Spatial datasets for geographical referencing. Part 0: General model for gazetteers and

spatial referencing



Subsector F13: ENVIRONMENTAL TESTS



ICS :National Ref : NF X15-140Title : Measurement of air moisture - Climatic and thermostatic chambers - Characterisation

and verification



Subsector F15: MATERIAL TESTING IN GENERAL



ICS :National Ref : 06235857Title : Thermal analysis (TA) - Vocabulary; Text in German and English




ICS :National Ref : 06235861Title : Testing of lubricants - Test methods - Part 4: Determination of vegetable oil fraction in

used diesel motor oils using infrared spectrometry



Subsector F19: OPTICS



ICS :National Ref : 00517272Title : Levelling staffs




ICS :National Ref : 00517273Title : Marks for survey plans, large scale maps and plans



Subsector F23: ENERGY

Subsector : F23 Registration Date : 2020-02-26Organization : UNICountry : Italy


ICS : 03.100.30National Ref : UNI1606262Title : Non-regulated professions. Energy management experts. Knowledge, skill and

responsibility and autonomy requirementsScope : This standard defines general requirements and procedures for the qualification of energy

management experts, by the definition of activities, competences and testing modality for the competences.

Relatedness :National : REV/AMD UNI CEI 11339:2009


Subsector F99: UNDETERMINED



ICS :National Ref : 12102892

Title : Container file - Summary of different product files for the data exchange



** End of Sector **




Sector H : PRODUCTS FOR HOUSEHOLD AND LEISURE USE


Subsector H04: SPORTS EQUIPMENT

Subsector : H04 Registration Date : 2020-02-26Organization : AFNORCountry : France


ICS :National Ref : PR NF P90-111Title : Sports grounds. Unbound mineral surfaces for outdoor sport areas. . Specifications for

construction.


Subsector : H04 Registration Date : 2020-02-26Organization : UNICountry : Italy


ICS : 97.200.40National Ref : UNI1607487Title : Guidance for the design of outdoor parks and playground areas referred to UNI EN

1176-7Scope : This standard specifies requirements and instructions for the design of outdoor parks and

playgroundareasforchildren,youngsandadultsreferredtoUNIEN1176-7.Allnaturalelementsandareasareexcluded.

Relatedness :National : REV/AMD UNI 11123:2004


Subsector H07: SPACE HEATING



ICS :National Ref : PR NF P52-001Title : Safety valves for heating installations - General technical specifications



Subsector H09: FURNITURE

Subsector : H09 Registration Date : 2020-02-14Organization : DINCountry : Germany


ICS :National Ref : 04201110Title : Hardware for furniture - Terms and definitions - Part 1: Assembly fittings, shelf supports,

hanging rails and coat hooks




ICS :National Ref : 04201112Title : Wood preservation - Part 2: Preventive constructional measures in buildings



Subsector H14: CARAVANS



ICS :National Ref : PR NF S56-204/A1Title : Leisure accommodation vehicles - Caravan holiday homes - Requirements for low-

voltage electrical installations



Subsector H26: SEALING MATERIALS



ICS :National Ref : 04500748Title : Measuring compression set of elastomers in hot water



Subsector H30: EQUIPMENT FOR CHILDREN

Subsector : H30 Registration Date : 2020-02-26Organization : UNICountry : Italy


ICS : 97.190National Ref : UNI1607435Title : Child care articles - Baby carriers - Safety requirements and test methods - Sling carriers

and soft carrier without integrated leg openingsScope : The standard specifies the safety requirements and test methods for sling carriers and soft

carriers without integrated leg openings, designed to carry a child in one or more positions andsecuredtothecarer'storso.Thestandardappliestothefollowingtypesofproductsforfull-termbabies:-babywraps;-oneshouldercarriers;-slingswithpanel;-softcarrierwithoutintegratedlegopeningsThisstandarddoesnotapplytoproductscoveredbyUNIEN13209-2.Sling carriers and soft carriers without integrated leg openings are designed to allow the carer's arms to be free to move. Sling carriers and soft carriers without integrated leg openings are intended for children up to a maximum weight of 18 kg.

Relatedness :National : REV/AMD UNI 11736:2019;EC 1-2019 UNI 11736:2019


** End of Sector **




Sector I : MECHANICAL ENGINEERING


Subsector I02: FASTENERS

Subsector : I02 Registration Date : 2020-02-04Organization : AFNORCountry : France


ICS :National Ref : PR NF E25-518Title : Fasteners - Thick plain washers for mechanical applications - Product grade A




ICS :National Ref : PR NF E25-734Title : Rivet tolerances for mechanical, metal and boiler construction




ICS :National Ref : PR NF E25-733Title : Rivets with countersunk head




ICS :National Ref : PR NF E25-732Title : Round head rivets


Subsector : I02 Registration Date : 2020-02-04Organization : AFNOR

Country : France


ICS :National Ref : PR NF E25-731Title : Raised mushroom head rivets




ICS :National Ref : PR NF E25-730Title : Cheese head rivets




ICS :National Ref : PR NF E25-655Title : Round head tapping screws with six lobes recess - Symbol RLX




ICS :National Ref : PR NF E25-303Title : Spherical holed head screw




ICS :

National Ref : PR NF E25-005Title : Fasteners - Test methods




ICS :National Ref : PR NF E25-659Title : Tapping screws - Cross recessed mushroom head ("Poëlier") - Symbol RL Z




ICS :National Ref : PR XP E25-046-2Title : Fasteners ? Tests against loosening by turning/settling ? Part 2: Alternating bending test

method (eccentric axial load)




ICS :National Ref : PR XP E25-046-1Title : Fasteners ? Tests against loosening by turning/settling ? Part 1 : Methodology by «

Staircase » approach




ICS :National Ref : PR NF E25-600Title : Fasteners - Wood screws family standard



Subsector I06: PRESSURE VESSELS



ICS :National Ref : PR NF E86-257Title : Vertical cylindrical storage tanks - General characteristics



Subsector I09: SMALL TOOLS

Subsector : I09 Registration Date : 2020-02-14Organization : DINCountry : Germany


ICS :National Ref : 12102893Title : Tabular layouts of properties - Part 102: Data exchange for tabular layouts of properties

with XML schema



Subsector I15: EQUIPMENT FOR PETROLEUM INDUSTRY



ICS :National Ref : PR NF E44-603Title : Dynamic stirrers - Commissioning



Subsector I16: INTERNAL COMBUSTION ENGINES



ICS :National Ref : PR NF E37-312Title : Reciprocating internal combustion engine driven alternative current generating sets -

Generating sets capable of being used as emergency stand-by source for supply of safety installations



Subsector I17: MACHINERY IN GENERAL (INCLUDING SAFETY)



ICS :National Ref : PR NF T35-014Title : Installations for application and drying of paints and varnishes - Box for preparation of

paints - Design, working characteristics



Subsector I19: NUCLEAR ENERGY



ICS :National Ref : 08000329Title : Image quality assurance in X-ray diagnostics - Part 1: General



Subsector I30: AIR DISTRIBUTION

Subsector : I30 Registration Date : 2020-02-26Organization : UNICountry : Italy


ICS : 91.140.30

National Ref : UNI1607478Title : Aeraulic systems for air conditioning and ventilation - Part 1: Classification and

requirements of systems and componentsScope : The UNI 10339 series concerns air conditioning systems for air conditioning intended to

protect health and improve the comfort of people in buildings. It therefore applies to aeraulic systems installed both in residential buildings and environments and in non-residential buildings and environments; the standard does not consider industrial buildings andenvironmentsinwhichairconditioninghasprocesspurposes.Part1ofUNI10339indicatesanddefines:1)purposespursuedandfunctionsperformed;2)typesandclassification;3) adoption and characteristics (of components, plant parts and plant systems) required for thepurposesofairqualityandindoorenvironment;4) adoption and characteristics (of components, plant parts and plant systems) required for energy efficiency purposes.



Subsector I31: VALVES



ICS :National Ref : PR NF E29-135Title : Shut-off gas valves, low pressure - Manually operated ball valves and closed bottom

taper plug valves for gas installations for building - Maximum working pressure below or equal to 0,5 bar



Subsector I40: INDUSTRIAL PIPING NETWORKS



ICS :National Ref : PR NF E 86-100Title : Storage tanks - Round examination or access openings



Subsector I99: UNDETERMINED



ICS :National Ref : 01200718Title : Dispense systems for draught beverages - Part 5: Safety, hygienic and application-

technical requirements and testing of ready-for-use dispense systems for draught beverages, component assemblies and components




ICS :National Ref : 02001133Title : Basket trolleys - Part 2: Requirements and tests for basket trolleys with base trays with or

without a child carrying facility, intended to be used on passenger conveyors



** End of Sector **




Sector M : METALLIC MATERIALS


Subsector M01: STEEL

Subsector : M01 Registration Date : 2020-02-04Organization : AFNORCountry : France


ICS :National Ref : PR NF A02-052Title : Tools and mechanical parts - Nitriding and nitrocarburizing of ferrous products




ICS :National Ref : PR NF P22-763Title : Steel gondola rack - Use and maintenance




ICS :National Ref : PR NF P22-762Title : Steel gondola rack - Tolerances, deformations and clearances




ICS :National Ref : PR NF P22-761Title : Steel gondola rack - Methodology and calculation methods


Subsector : M01 Registration Date : 2020-02-04Organization : AFNOR

Country : France


ICS :National Ref : PR NF A 08-349Title : Chemical analysis of steel and cast iron - Determination of cobalt content - Flame atomic

absorption spectrometric method




ICS :National Ref : PR NF A 45-007Title : Iron and steel - Small hot rolled U iron bars - Dimensions and tolerances




ICS :National Ref : PR NF A35-080-2Title : Reinforcing steel - Weldable steel - Part 2: Welded fabric




ICS :National Ref : PR NF A49-647Title : Steel tubes - Structural welded tubes, circular, square, rectangular or oval, in ferritic or

austenitic stainless steels - Dimensions - Technical delivery conditions


Subsector : M01 Registration Date : 2020-02-04Organization : AFNORCountry : FranceProject ID : 00218242/0001 Project

EstablishedICS :National Ref : PR NF A49-185Title : Butt-welding pipe fittings in wrought carbon steel - Fittings for general use and without

specific inspection requirements


Subsector : M01 (Secondary Subsector)

Registration Date : 2020-02-11

Organization : NENCountry : Netherlands


ICS : 91.010.30, 91.080.01National Ref : NPR 6766:2020 Concept nlTitle : Corrosion steel structures in the subsoil Scope : NPR 6766 contains guidelines for the design and construction of constructive steel elements

in the subsoil in relation to corrosion. The purpose of this code of practice is to make such a construction possible that corrosion will not lead to an unsafe or unusable construction within the reference period.



Subsector M05: WELDING



ICS :National Ref : PR NF A84-440Title : Equipment for gas welding and allied processes - Pressure reduction station for

compressed liquefied gas - Equipment - Setting up - Checking



Subsector M14: NICKEL

Subsector : M14 Registration Date : 2020-02-14Organization : DINCountry : Germany


ICS :National Ref : 06630271Title : Wrought nickel alloys with molybdenum and chromium - Chemical composition


Subsector : M14 Registration Date : 2020-02-14Organization : DINCountry : Germany


ICS :National Ref : 06630272Title : Wrought nickel alloys with chromium - Chemical composition



Subsector M16: MECHANICAL TESTS FOR METALS



ICS :National Ref : PR NF A 35-030Title : Steel products - High bond ribbed steel bars for concrete poles, supports for over head

lines



** End of Sector **




Sector N : NON-METALLIC MATERIALS


Subsector N01: PAPER AND BOARD

Subsector : N01 Registration Date : 2020-02-14Organization : DINCountry : Germany


ICS :National Ref : 07800664Title : Pigments and extenders - Determination of water absorption value



Subsector N02: SOLID FUELS

Subsector : N02 Registration Date : 2020-02-26Organization : UNICountry : Italy


ICS : 75.160.10National Ref : UNI1607324Title : Co-combustion, incineration and co-incineration plants - Determination of the renewable

energy fraction produced by plant with 14C method at the chimneyScope : This technical specification provides the criteria and requirements for the calculation of the

renewable energy fraction produced by co-combustion, incineration and co-incineration plant with 14C method at the chimney. It is applicable to the evaluation of renewable energy fraction produced by gasification and pyrolysis plant; it is also applicable to the evaluation of CO2 emissions for the "emission trading".

Relatedness :National : REV/AMD UNI/TS 11461:2012

Subsector : N02 Registration Date : 2020-02-26Organization : UNICountry : Italy


ICS : 13.030.30, 75.160.10National Ref : UNI1607325Title : Characterization of waste and SRF regarding biomass and energy contentScope : The document provides the criteria for the characterization of waste and solid recovered

fuels regarding biomass and energy content.

Relatedness :National : REV/AMD UNI/TS 11597:2015


Subsector N03: PETROLEUM PRODUCTS

Subsector : N03 Registration Date : 2020-02-14Organization : DIN

Country : Germany


ICS :National Ref : 06235639Title : Testing of lubricants - Determination of the consistency of metal saponified lubricating

greases using an oscillatory rheometer with a cone/plate system



Subsector N06: RUBBER

Subsector : N06 Registration Date : 2020-02-04Organization : AFNORCountry : France


ICS :National Ref : PR NF D36-110Title : Household economy - Connection assemblies of flexible hoses to standard NF EN

16436-2 with clamping devices for butane and propane-fired domestic appliances fed with LPG cylinders


Subsector : N06 Registration Date : 2020-02-04Organization : AFNORCountry : France


ICS :National Ref : PR NF D36-112Title : Household economy - Reinforced flexible vulcanized rubber piping and (reinforced)

flexible thermoplastics piping in conformity with EN 16436-2 for the external connection of domestic appliances using butane or propane from individual cylinders



Subsector N07: SAWN TIMBER

Subsector : N07 Registration Date : 2020-02-27Organization : UNMS SRCountry : Slovakia


ICS : 79.040National Ref : STN 48 0009/Z4Title : Volume tables of round timber without bark according to the mean diameter measured in

bar. Amendment 4

Scope : This amendment of national standard will contain new tables of number values for determination of original volumes solely of ash round timber, because the current standard specifies the volume determination of the ash round timber by tables for oak tree. The revision will maintain the existing procedure on the mathematical calculation of volumes. A double bark diameter will be substracted from the mean diameter of ash round timber measured in bark. The bark diameter will be derived from the empirical material gathered for the purpose of developing of ash volume tables in former Czechoslovakia in 1980 to 1984.

Relatedness :National : REV/AMD STN 48 0009


Subsector N09: PLASTICS



ICS :National Ref : 00518755Title : Termoplastic waterstops for sealing joints in concrete - Part 1: Terms and definitions,

shapes, dimensions, marking




ICS :National Ref : 00518756Title : Thermoplastic waterstops for sealing joints in concrete - Part 2: Material requirements,

testing and inspection


Subsector : N09 Registration Date : 2020-02-11Organization : UNECountry : Spain Latest Date for Comments : 2020-03-22


ICS :National Ref : PNE 53972Title : Plastics. Recycled polypropylene (PP). CharacteristicsScope : This standard describes the characterization of recycled polypropylene (PP) materials and

the orientation of their technical characteristics for the transformation processes.



** End of Sector **




Sector S : HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT


Subsector S01: ACOUSTICS AND SOUND INSULATION

Subsector : S01 Registration Date : 2020-02-14Organization : DINCountry : Germany


ICS : 03.220.30National Ref : DIN 38452-1Title : Long-term measurement of railway traffic noise - Part 1: Emissions; Text in German and

English


Subsector : S01 Registration Date : 2020-02-26Organization : UNICountry : Italy


ICS : 91.120.20National Ref : UNI1607465Title : Building acoustics - Acoustic classification of building units - Evaluation procedure and in

situ verificationScope : The UNI 11367 standard defines, with reference to some acoustic performance requirements

of buildings, the criteria for their measurement and evaluation. On this basis, the standard also establishes an acoustic classification method (with reference to each of the requirements), for the entire property unit (except for certain types). This method allows, when possible, also a synthetic evaluation (with a single descriptor index) of the set of requirements per property unit.



Subsector S05: DENTISTRY



ICS :National Ref : 01402319Title : Dentistry - Accuracy of workflow of dental 3D printing



Subsector S06: VIBRATION & SHOCK

Subsector : S06 Registration Date : 2020-02-26Organization : UNI

Country : Italy


ICS : 17.160, 53.100National Ref : UNI1607464Title : Acoustics - Test method for measuring vibrations transmitted from the seat to the earth-

moving machinery operator - Excavator, loader, backhoe loader, dumperScope : European Directive 2006/42 / EC concerning construction principles of machines and their

safety requirements requires manufacturers to declare the vibration emission value of their products.European Standard UNI EN 1032 - Examination of mobile machines for the purpose of determining the values of vibratory emission - indicates general criteria but does not establish specific test procedures; the consequence is that each manufacturer performs the measurements using different test methods and different format for presentation results, making it difficult to compare the emissions of machinery produced by different manufacturers.Furthermore, since the current legislation on occupational safety (Legislative Decree 81/2008) allows to carry out the assessment of occupational risk from vibrations using the data provided by the manufacturer, the end user may be induced to underestimate or overestimate the risk as he cannot know if and how much the test conditions followed by themanufacturerreflecttherealuseofthemachine.The proposed standard provides for defining the test paths, the methods for carrying out the testsandtheformatforpresentingtheresults.



Subsector S08: AIR QUALITY

Subsector : S08 Registration Date : 2020-02-04Organization : AFNORCountry : France


ICS :National Ref : PR XP X43-910Title : Guidelines for the valuable elaboration marks in biosurveillance of the air




ICS :National Ref : PR NF X20-702Title : Chemical breath tester - Estimation of the alcohol impregnation by analysis of expelled

air - Specifications and test methods


Subsector : S08 Registration Date : 2020-02-11Organization : UNECountry : Spain Latest Date for Comments : 2020-03-02


ICS :National Ref : PNE 171340Title : Validation and qualification of controlled environments in hospitalsScope : This standard establishes the basic principles of control, a standard system with application

criteria and test methodology, and frequency, to validate the correct operation of the controlled environment rooms are located in health centers.



Subsector S09: WATER QUALITY AND WATER SUPPLY



ICS :National Ref : PR XP T90-722-2Title : Water quality - Molecular, physiological and behavioral measurements in the mammal

(amphipod crustacean) - Part 2: Measurement of reproduction markers




ICS :National Ref : PR XP T90-722-3Title : Water quality - Molecular, physiological and behavioral measurements in the mammal

(amphipod crustacean) - Part 3: Measurement of the feeding rate




ICS :National Ref : PR XP T90-722-1

Title : Water quality - Molecular, physiological and behavioral measurements in the mammal (amphipod crustacean) Part 1: Determination of the acetylcholinesterase (AChE) enzyme activity


Subsector : S09 Registration Date : 2020-02-28Organization : BSICountry : United Kingdom


ICS :National Ref : BS 5911-3Title : Concrete pipes and ancillary concrete products. Specification for unreinforced and

reinforced concrete manholes and soakaways


Subsector : S09 Registration Date : 2020-02-28Organization : BSICountry : United Kingdom


ICS :National Ref : BS 5911-6Title : Concrete pipes and ancillary concrete products. Specification for road gullies and gully

cover slabs




ICS :National Ref : 11904423Title : Water engineering; terms; dam plants




ICS :National Ref : 11904440Title : German standard methods for the examination of water, waste water and sludge - Jointly

determinable substances (group F) - Part 52: Determination of 17ß-Estradiol (E2), 17ß-Estradiol (E2) und 17¿-Ethinylestradiol (EE1) - Method using high performance liquid chromatography and mass spectrometric detection (HPLC-MS/MS or -HRMS) (F 52)




ICS :National Ref : 11904441Title : German standard methods for the examination of water, waste water and sludge -

Parameters characterizing effects and substances (group H) - Part 59: Determination of adsorbable organically bound fluorine, chlorine, bromine and iodine (AOF, AOCl, AOBr, AOI) after combustion and ion chromatographic measurement (Combustion Ion Chromatography - CIC) (H 59)




ICS :National Ref : 11904443Title : German standard methods for the examination of water, waste water and sludge -

Parameters characterizing effects and substances (group H) - Part 63: Determination of fine-grained filterable substances equal to or less than 63 µm (AFS 63) (AFS <(Index)63>) (H 63)



Subsector S99: UNDETERMINED



ICS :National Ref : 06301989Title : Refrigerators and freezers for the medical sector- Definitions, requirements, testing


Subsector : S99 Registration Date : 2020-02-14

Organization : DINCountry : Germany


ICS :National Ref : 11904537Title : Codes of practice for drinking water installations - Part 500: Pressure boosting stations

with RPM-regulated pumps



** End of Sector **




Sector T : TRANSPORT, MECHANICAL HANDLING AND PACKAGING


Subsector T01: SHIPBUILDING AND MARITIME STRUCTURES

Subsector : T01 Registration Date : 2020-02-14Organization : DINCountry : Germany


ICS :National Ref : 13203101Title : Ships and marine technology - Dimensioning for air condition and air ventilation plants for

accommodation on ships



Subsector T02: AEROSPACE

Subsector : T02 Registration Date : 2020-02-04Organization : AFNORCountry : France


ICS :National Ref : NF L09-777Title : Aerospace series - Codification of references relating to standardized semi-finished metal

products selected for aeronautical constructions




ICS :National Ref : PR NF L17-124Title : Aerospace series - Butadiene - Acrylonitrile rubbers - Class 24 - Characteristics




ICS :National Ref : PR NF L17-154Title : Aerospace series - Elastomers - Silicones - Class 54 - Characteristics




ICS :National Ref : NF L 22-731Title : Aerospace series ¿ ISO thread solid shaft with pin hole


Subsector : T02 Registration Date : 2020-02-28Organization : BSICountry : United Kingdom


ICS :National Ref : BS 2 SP 7Title : Specification for aircraft material - Fork joints (high tensile type) (for sizes No. 4 B.A. to

3/4 inch B.S.F. inclusive)




ICS :National Ref : BS 2A 25Title : Steel hexagonal-headed bolts (B.A. and B.S.F. threads) for aircraft




ICS :National Ref : BS 4A 111Title : Specification for cadmium-plated steel bolts (Unified hexagons and Unified threads) with

close tolerance shanks




ICS :National Ref : BS A 250-253Title : Specification for slotted hexagonal shear nuts (of Class 3B UNJ thread)




ICS :National Ref : BS SP 18 and 19Title : Specification for washers for aircraft purposes (primarily for use with timber)



Subsector T03: ROAD VEHICLES



ICS :National Ref : PR NF S61-550/A1Title : Firefighting and rescue service equipment - Special complementary provisions for

hydraulic platforms (HPs)




ICS :National Ref : PR NF S61-547/A1Title : Firefighting and rescue service equippment - Special complementary provisions for

turntable ladders




ICS :National Ref : PR NF S61-528/A1Title : Firefighting and rescue service equipment - Appliances equipped with a cradle equipment

- Safety and performance requirements




ICS :National Ref : PR NF S61-527/A1Title : Firefighting and rescue service vehicles - Rescue tenders - Road rescue appliances




ICS :National Ref : PR NF R15-602-7Title : Road vehicles - Test methods of cooling fluids - Part 7: Measurement of corrosion

protection properties - Corrosion test in glassware



Subsector T06: METAL AND PLASTIC CONTAINERS



ICS :National Ref : PR NF M88-780Title : Installations for liquified hydrocarbons in containers ¿ Corrugated, metallic, flexible piping

of LPG domestic appliances for operating pressures up to 20 bar



Subsector T09: MATERIALS HANDLING AND STORAGE EQUIPMENT



ICS :National Ref : PR NF H95-420-2Title : Materials handling and lifting in the agri-foodstuffs industries - Adjustable and non-

adjustable platforms - Part 2: Built-in safety for mobile platforms



Subsector T14: PACKAGING

Subsector : T14 Registration Date : 2020-02-14Organization : DINCountry : Germany


ICS :National Ref : 11501253Title : Means of packaging - Bottles and hollow-ware from glass - Part 1: General tolerances for

automatic produced bottles



Subsector T19: ROAD SAFETY

Subsector : T19 Registration Date : 2020-02-18Organization : ISSCountry : Serbia Latest Date for Comments : 2020-04-02


ICS : 93.080.30National Ref : naSRPS U.S4.234:2018Title : Road markings - Other markings - Parking places marking Scope : This standard specifies the sizes and manner of parking places marking for different vehicle

categories, angles and structure of parking spaces.


Subsector : T19 Registration Date : 2020-02-18Organization : ISSCountry : Serbia Latest Date for Comments : 2020-04-02Project ID : 00063116/0001 Draft for public

enquiryICS : 93.080.30National Ref : naSRPS U.S4.221:2018Title : Road markings – Longitudinal markings - Definitions and classificationScope : This standard specifies type of longitudinal markings.




ICS : 93.080.30National Ref : naSRPS U.S4.228:2019Title : Road markings – Transverse markings – Cyclist crossings Scope : This standard specifies the position and sizes of the cyclist crossings, as well as how they are

marked with road markings.




ICS : 93.080.30National Ref : naSRPS U.S4.229:2019Title : Road markings – Other markings – Arrow markings Scope : This standard specifies shape and size of arrow markings on road.


Subsector : T19 Registration Date : 2020-02-26Organization : UNICountry : Italy


ICS : 93.080.30National Ref : UNI1607436Title : Guideline for the drafting of technical specifications on road signsScope : The Technical Report provides indications to the owners and / or road managers for the

draftingoftechnicalspecifications on road signs.



Subsector T20: TRAM- AND RAILWAY ENGINEERING



ICS :National Ref : PR NF F19-218Title : Railway rolling stock. Anticorrosive paint resistant to temperatures up to 350°C




ICS :National Ref : NF F19-352Title : Railway rolling stock ¿ Inside air tank paint



** End of Sector **

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC

February 2020

Issued on : 6 March 2020

Information Procedure on Standards

Notifications registered at CCMC during February 2020

Sector U : GENERAL ELECTROTECHNICAL STANDARDS

Register issued on : 6 March 2020

Subsector U12: RELIABILITY

Subsector : U12 Registration Date : 2020-02-04Organization : AFNORCountry : France


ICS :National Ref : PR NF X60-301Title : Guide for taking into account criteria for maintenability of durables for industrial and

professionnal use.


Subsector : U12 Registration Date : 2020-02-04Organization : AFNORCountry : France


ICS :National Ref : PR NF X60-301Title : Guide for taking into account criteria for maintenability of durables for industrial and

professionnal use.



** End of Sector **

Information Procedure on Standards

Notifications registered at CCMC during February 2020

Sector W : ELECTRICAL ENGINEERING

Register issued on : 6 March 2020

Subsector W08: ELECTRIC CABLES

Subsector : W08 Registration Date : 2020-02-11Organization : UNECountry : Spain Latest Date for Comments : 2020-03-12


ICS :National Ref : PNE 211025Title : Cables with intrinsic resistance to fire and intended for use in emergency circuits.Scope : The purpose of this standard is to define the characteristics of cables designed to have an

intrinsic resistance to fire intended for safety circuits, for example: signalling, detection and alarmcircuits,circuitsforevacuationandfirefightingservices,etc.It is applicable to 300/500 V rated voltage and 0.6 / 1 kV rated voltage cables.




ICS :National Ref : PNE 211620Title : Distribution cables with extruded insulation, of rated voltage from 3.6 / 6 (7.2) kV up to

20.8 / 36 (42) kV inclusive. Single core and single core with XLPE insulation assembled cables. Cables with aluminium tape screen and polyolefin compound cover (types 10E-6, 10E-7, 10E-8 and 10E-9)

Scope : This standard specifies the construction, dimensions and test requirements of power cables withXLPEinsulationforratedvoltages(U)from10kVupto30kVforfixedinstallations.Thetypesforcablecoveredbythisstandardare:Type10E-6:Cablewithpolyolefincompoundsheath,withoutpropertiesincaseoffire.Type 10E-7: Cable with polyolefin compound sheath, low content halogen and special propertiesagainstfirereaction.MinimumclassoffirereactionEca.Type 10E-8: Cable with polyolefin compound sheath, low content halogen and special propertiesagainstfirereaction.MinimumclassoffirereactionCca-s1b,d2,a1.Type 10E-9: Bundle assembled type 10E-7 cables, with steel messenger core for overhead distributionandservice.The performance definition regarding the reaction to fire of the cables subject to this standard has been made in accordance with Delegated Regulation (EU) 2016/364 of the Commission, on July 1st, 2015, regarding the classification of fire reaction properties of construction products in accordance with Regulation (EU) No 305/2011 of the European Parliament and of the Council.




ICS :National Ref : PNE-HD 620-10E:2012/1MTitle : Distribution cables with extruded insulation for rated voltages from 3,6/6 (7,2) kV up to

and including 20,8/36 (42) kV. Part 10: XLPE insulated single core, and single core pre-assembled cables. Section E: Cables with polyolefin compound sheath (types 10E-1, 10E-3, 10E-4 and 10E-5).

Scope : This standard specifies the construction, dimensions and test requirements of power cables withXLPEinsulationforratedvoltages(U)from10kVupto30kVforfixedinstallations.Thetypesofcablecoveredbythisstandardare:Type10E-1:Cablewithpolyolefincompoundsheath,withoutpropertiesincaseoffire.Type 10E-3: Bundle assembled Type 10E-1 cables, with steel messenger core for overhead distributionandserviceType 10E-4: Cable with polyolefin compound sheath, low content halogen and special propertiesagainstfirereaction.MinimumclassoffirereactionEca.Type 10E-5: Cable with polyolefin compound sheath, low content halogen and special propertiesagainstfirereaction.MinimumclassoffirereactionCca-s1b,d2,a1.All types of cable subject to this standard are longitudinally sealed to water penetration, and canbe:-OL:sealingonlyonthesemiconductorscreenontheinsulation-2OL:sealingontheconductorandonthesemiconductorscreenontheinsulation.The performance definition regarding the reaction to fire of the cables subject to this standard has been made in accordance with Delegated Regulation (EU) 2016/364 of the Commission, on July 1st, 2015, regarding the classification of fire reaction properties of construction products in accordance with Regulation (EU) No 305/2011 of the European Parliament and of the Council.



Subsector W11: ELECTRICAL ACCESSORIES

Subsector : W11 Registration Date : 2020-02-14Organization : DINCountry : Germany


ICS : 29.120.50National Ref : DIN VDE 0664-400Title : Residual current operated circuit-breakers type B without integral overcurrent protection

to operate at residual alternating and residual direct currents for advanced preventative protection against fire - Part 400: RCCB Type B+


Subsector : W11 Registration Date : 2020-02-14Organization : DINCountry : GermanyProject ID : 02228754/0001 Project

EstablishedICS : 29.120.50National Ref : DIN VDE 0664-401Title : Residual current operated circuit-breakers type B with integral overcurrent protection to

operate at residual alternating and residual direct currents for advanced preventative protection against fire - Part 401: RCBO Type B+



Subsector W27: ELECTRICAL INSTALLATIONS IN BUILDINGS

Subsector : W27 Registration Date : 2020-02-28Organization : BSICountry : United Kingdom


ICS :National Ref : BS 7657Title : Specification for cut out assemblies up to 100 A rating, for power supply to buildings



** End of Sector **

ΠΡΟΣ: Όλα τα Μέλη Σας επισυνάπτo · Λεωφ. Γρίβα Διγενή 38 &...

Documents

Transcript of ΠΡΟΣ: Όλα τα Μέλη Σας επισυνάπτo · Λεωφ. Γρίβα Διγενή 38 &...