CONCRETE REPAIR,PROTECTION & REINFORCEMENTRepair mortars | Heat resistant materials Corrosion Resistant Polymer Concretes and Mortars Corrosion Resistant Linings and Coatings Corrosion Resistant Joint fillers and Membranes Injection resins | FRP Reinforcement SystemsIN

DU

STR

IAL

TECHNOLOGIES INC.

TECHNOLOGIES INC.

TECHNOLOGIES INC.

PROUDLYCANADIAN

PROUDLYCANADIAN

PROUDLYCANADIAN

2TECHNOLOGIES INC.

TECHNOLOGIES INC.

TECHNOLOGIES INC.

PROUDLYCANADIAN

PROUDLYCANADIAN

PROUDLYCANADIAN

REPAIR MORTARS

STRUCTUROC HHIGH STRENGTH RAPID SETTING MORTAR FOR HORIZONTAL REPAIRS

Repair of spalled and damaged concrete floors due to wear, abrasion, temperature and other damage factors.

STRUCTUROC H is a rapid setting, high early strength repair mortar that produces a fast, permanent repair of concrete. STRUCTUROC H is dimensionally stable, shrinkage and crack resistant and forms an integral bond with the existing concrete to restore its structural integrity. STRUCTUROC H is designed for horizontal repairs and can be placed at thicknesses ranging from 12.5 mm (1/2”) up to 300 mm (12”) in a single lift. This product can be extended with up to 50% of clean dry 10 mm (3/8”) granitic or clean pea gravel aggregate to then produce a rapid setting concrete for repair.

Fast repair and return to service of damaged industrial concrete floorsFast repair and return to service of concrete bases supporting equipmentExcellent resistance to wear and abrasion found in mining and metallurgy industriesRapid and early strengthNo bonding agent requiredExcellent bond strengthRepair and creation of concrete slopes, drains and trenchesRepair of walls, bases and columnsCan be overcoated within 6 hours after placementFreeze/Thaw resistantMeets or exceeds ASTM C928/C928M-09

COVERAGECovers approximately 0.93 m2 (10 ft2) per bag at a thickness of 12.5 mm (1/2”)

STRUCTUROC H ULTRAHIGH STRENGTH RAPID SETTING MORTAR FOR HORIZONTAL REPAIRS

Repair of spalled and damaged concrete floors due to wear, abrasion, temperature and other damage factors.

STRUCTUROC H-ULTRA is a rapid setting, high early strength repair mortar that produces a fast, permanent repair of concrete. STRUCTUROC H-ULTRA is dimensionally stable, shrinkage and crack resistant and forms an integral bond with the existing concrete to restore its structural integrity. STRUCTUROC H-ULTRA is designed for horizontal repairs and can be placed at thicknesses ranging from 6 mm (1/4”) up to 125 mm (6”) in a single lift. This product can be extended with up to 50% of clean dry 10 mm (3/8”) granitic or clean pea gravel aggregate to then produce a rapid setting concrete for repair.

Can be applied down to ¼” (6mm) thicknessFast repair and return to service of damaged industrial concrete floorsFast repair and return to service of concrete bases supporting equipmentExcellent resistance to wear and abrasion found in mining and metallurgy industriesRapid and early strengthNo bonding agent requiredExcellent bond strengthRepair and creation of concrete slopes, drains and trenchesCan be applied down to ¼” (6mm) thicknessRepair of walls, bases and columnsCan be overcoated within 6 hours after placementFreeze/Thaw resistantMeets or exceeds ASTM C928/C928M-09

COVERAGECovers approximately 1.9 m2 (20 ft2) per bag at a thickness of 6 mm (1/4”)

3TECHNOLOGIES INC.

TECHNOLOGIES INC.

TECHNOLOGIES INC.

PROUDLYCANADIAN

PROUDLYCANADIAN

PROUDLYCANADIAN

STRUCTUROC THTHIGH STRENGTH, HIGH TEMPERATURE RESISTANT, RAPID SETTING MORTAR FOR HORIZONTAL REPAIRS

Repair of spalled or damaged concrete floors due to high tempera-ture exposure, abrasion, wear and other damage factors.

STRUCTUROC THT is fast setting, high strength, high temperature resistant repair mortar that produces a rapid and permanent repair for concrete. STRUCTUROC THT is dimensionally stable and forms an integral bond with the existing concrete to restore its structural integrity. STRUCTUROC THT is designed for horizontal repairs. It can be placed at thicknesses ranging from 50 mm to 150 mm in one single operation.

Concrete repairs located near industrial furnaces or other areas ex-posed to high heat (up to 700°C / 1300°F)

Fast repair and return to service of damaged industrial concrete floors

Repair and creation of concrete slopes, drains and trenches

Repair of concrete walls, bases, pads and columns

COVERAGEYields 12 L (0.42 ft³) of material when mixed with 2.5 L of potable water, which will cover approx. 0.255 m² (2.75 ft²) when applied at a thickness of 50 mm (2”).

PACKAGING22.7 kg (50 lbs) bag

STRUCTUROC VHIGH STRENGTH RAPID SETTING MORTAR FOR VERTICAL REPAIRS

All vertical or overhead repairs.

STRUCTUROC-V is a cement based, one component, polymer modified, high strength, shrinkage compensated rapid setting repair mortar. It is designed for vertical and overhead concrete repairs to produce superior bond, tensile and flexural strength. STRUCTUROC V is able to be placed and sculpted to proper shape in one operation for thicknesses from 5 mm (1/4”) to 50 mm (2”).

Bridges, viaducts and tunnelsParapets, columns and beams repairsSingle componentTenacious bond strengthHigh early and ultimate compressive and flexural strengthRapid settingCan be overcoated within 8 hours after placementEasily applied with a trowel

COVERAGECovers approximately 2.0 m2 (22 ft2) per bag at a thickness of 6 mm (1/4”)

PACKAGING22.7 kg (50 lbs) bag

VERTICAL AND HEAT RESISTANT MORTARS

4TECHNOLOGIES INC.

TECHNOLOGIES INC.

TECHNOLOGIES INC.

PROUDLYCANADIAN

PROUDLYCANADIAN

PROUDLYCANADIAN

SILICATE MORTARS AND CONCRETE

ACIDPROOF CONCRETE NO. 54 LWACIDPROOF CONCRETE

SAUEREISEN ACIDPROOF CONCRETE NO. 54 - with almost a half century of successful, varied service - is the original acid-resistant material for gunite construction. For those applications that require a lower K factor, lightweight materials, or higher temperature resistance, No. 54 LW is available.

NO. 54 AND 54 LW are potassium silicate, acid-resistant refractories for use as monolithic linings in chimneys, stacks, ducts, breechings, scrubbers, precipitators, tanks, process vessels, floors and sumps. These two-component materials consist of Powder and Liquid which are mixed together on the job.

Resistant to most solvents, oils, acids and acid salts (except hydrofluoric) over a pH range of 0.0 to 7.0

Maximum service temperature of 1400°F (760°C).

Potassium silicate bonded.

Fast chemical set - less down time.

YIELD Quantities* required per square foot. 2 inches (minimum) 24 pounds Each additional inch 12 pounds Quantities do not include losses during application or normal density variations.

ACIDPROOF CONCRETE NO. 54 SGACIDPROOF CONCRETE

SAUEREISEN ACIDPROOF CONCRETE NO. 54 SG - STRUCTURAL GRADE is a potassium silicate castable refractory for chemical resis-tant construction of sumps, dikes, containment pads, trenches, walls and other structural support columns or bases. Since No. 54 SG is fast-setting and strong, it eliminates the requirement for a Portland cement foundation in new construction and maintenance applications.

The NO. 54 SG - STRUCTURAL GRADE material has been specifically formulated to resemble the physical characteristics of Portland cement and should be installed with proper reinforcement, mixing, forming and casting methods. After its cure, No. 54 SG provides outstanding performance as a chemical resistant liner for the most severe acidic environments.

Potassium silicate-bonded.

Resists most solvents, oil, acids and acid salts (except hydrofluoric) over a pH range of 0.0 to 7.0.

Withstands water and vapor without special treatment.

Applied by guniting.

Fast chemical set - less construction delay.

Safe to use - nonflammable; will not support combustion.

Specially recommended for all concentrations of sulfuric, hydrochloric, nitric, and phosphoric acids.

YIELD 1 inches: 10.5 pounds | 2 inches: 21.0 pounds

5TECHNOLOGIES INC.

TECHNOLOGIES INC.

TECHNOLOGIES INC.

PROUDLYCANADIAN

PROUDLYCANADIAN

PROUDLYCANADIAN

EPOXY NOVOLAK POLYMER CONCRETE NO. 265HEAVY DUTY SELF-LEVELING WEAR RESISTANT TOPPING

SAUEREISEN EPOXY NOVOLAK POLYMER CONCRETE NO. 265 is a castable for the chemical-resistant construction of sumps, dikes, containment areas, trenches, walls, floors, and structural support columns or bases. No. 265 has been specifically formulated for foundation construction and should be installed with proper reinforcement. Mixing and forming methods are similar to those used for Portland cement installations.

EPOXY NOVOLAK POLYMER CONCRETE can also be used as a monolithic topping to rehabilitate chemically deteriorated concrete or to protect new construction. This system incorporates Sauereisen ConoWeld No. 501 primer to promote a strong bond.

Resistant to a wide range of solvents, oils, acids and acid salts (except hydrofluoric) over a pH range of 0.0 to 14.0

Maximum service temperature of 250°F (121.1°C).

Fast chemical set - less down time.

Low porosity.

COVERAGE1 gallon unit 200 ft2 @ 8 mils thick | 3 gallon unit 600 ft2 @ 8 mils thick

Epoxy NovolaK Polymer Concrete No. 265 Regular unit yields 1.2 ft3 | Large unit yields 1.98 ft3

No. 265 must be cast at a minimum 1-1/2 inches thick. A 1-1/2 inch thickness of No. 265 will require approximately 18 pounds of material per square foot.**Quantity estimations do not include losses during application or normal density variations.

SPEC-ROC I&EHEAVY DUTY WEAR RESISTANT TOPPING

SPEC-ROC I&E is a three-component iron aggregate epoxy resin system for resurfacing concrete floors. SPEC-ROC I&E is typically applied from ¼” to 1” thicknesses in areas that require excellent impact and wear resistance found in mining, metallurgy and other heavy industrial environments.

Most durable flooring system to resist impact and abrasion

High early strength

High strength at bond line

Free of solvents and complies with VOC requirements

100% solids, Low odor

Fast installation, fast cure

Light traffic in 12 hours, heavy traffic in 24 hours

Excellent chemical and corrosion resistance

COVERAGE16.8 ft2 (1.6m2) per unit at 1/4” (6.35mm) thickness

POLYMER CONCRETE

AND MORTARS

6TECHNOLOGIES INC.

TECHNOLOGIES INC.

TECHNOLOGIES INC.

PROUDLYCANADIAN

PROUDLYCANADIAN

PROUDLYCANADIAN

PROTECTIVE COATINGS AND LININGS

SPEC-ROC USPEC-ROC U is a three part, cementitious-polyurethane troweled system for resurfacing interior concrete floors that require thermal shock and corrosion resistance.

Food & beverage processing facility floors Pharmaceutical facilities Wet processing & packaging areas Freezers and coolers Commercial kitchens Meat processing areas

Resistant to fungi growth per ASTM G-21

Impact & Abrasion resistant surface suitable for heavy traffic and fork lift operations

High strength at bond line

High temperature resistance to 250°F (121°C)

Low odor, fast installation, fast cure

Anti-slip surface, meets ADA recommendations

Excellent chemical and corrosion resistance

COVERAGE23 ft2 (2.1m2) per unit at 1/4” (6.35mm) thickness

SPEC-ROC UWRSPEC-ROC UWR is a heavy-duty aggregate urethane flooring system typically installed at 3/8” to ½” thickness in areas that require resistance to thermal shock, impact, chemical exposure and heavy abrasion.

SPEC-ROC UWR floors are extremely tough and have physical properties that exceed those of other systems.

Impact & Abrasion resistant surface suitable for very heavy traffic and fork lift operations

High strength at bond line

High temperature resistance to 250°F (121°C)

Low odor, fast installation, fast cure

Light traffic in 12 hours, heavy traffic in 24 hours

Excellent chemical and corrosion resistance

COVERAGE 17 ft2 (1.6m2) per unit at 3/8” thickness

URETHANE MORTARS

7TECHNOLOGIES INC.

TECHNOLOGIES INC.

TECHNOLOGIES INC.

PROUDLYCANADIAN

PROUDLYCANADIAN

PROUDLYCANADIAN

PROTECTIVE COATINGS AND LININGS

RESTOKRETE 209FILLER COMPOUND

Sauereisen RestoKrete™ Filler Compound No. 209 is an epoxy formulation specifically designed to fill voids, irregularities, and air pockets in concrete and steel. The filler compound provides a smooth surface for the application of epoxy monolithics. No. 209 is not compatible with vinyl ester topcoats. The No. 209FS is a faster setting formulation.

Fills and seals irregularities in concrete, steel and brick substrates.Suitable for application over damp or dry concrete surfaces.Easy to apply.Quick set time.

CONOGLAZE - EPOXY NOVOLAK NO. 228CONOGLAZE - EPOXY NOVOLAK NO. 228 is a 100% solids corrosion resistant Novolac epoxy coating system.

Primary containment of aggressive chemicalsSecondary containment of aggressive chemicalsIndustrial flooring subject to chemical attackExcellent resistance to sulfuric acid

COVERAGE160 ft2 per gal. at 10 mils

URETHANE MORTARS

FIBRECRETETM - EPOXY NOVOLAK NO. 218FIBRECRETETM - EPOXY NOVOLAK NO. 218 is a fiber-reinforced, chemically-resistant, 100% solids, epoxy novolak lining system used to protect concrete and steel from chemical and physical abuse. The interlocking fiber matrix of FibreCreteTM systems exhibit outstanding flexural and tensile strengths.

FIBRECRETETM may be used in many kinds of manufacturing, processing, storage, and shipping areas. It is specifically formulated to resist strong oxidizing environments, especially high concentrations of sulfuric acid. This material is applied by spray and provides a protective barrier resistant to thermal shock in refrigeration areas and is resistant to higher temperatures.

The FIBRECRETETM system utilizes Sauereisen ConoWeld No. 501 as a bond enhancing primer. For a glossy surface, FibreCrete may be topcoated with Sauereisen ConoGlaze.

Excellent resistance to sulfuric acid.Meets USDA standards for use in federally inspected meat and poultry plants.Inter-locking fiber matrix.Colors available in 53 gray, 63 tile red.Excellent resistance to hydrocarbon exposure.

COVERAGEConoWeldTM 501 - 200 ft2/gal. at 8 mils PenePrimeTM 500 - 200 ft2/gal. at 8 mils Hi-Temp Primer 560 - 320 ft2/gal. at 5 mils FibreCreteTM 40 ft2/gal.at 40 milsCoverage is theoretical and will vary depending upon surface conditions, porosity, application techniques and specific project conditions.

8TECHNOLOGIES INC.

TECHNOLOGIES INC.

TECHNOLOGIES INC.

PROUDLYCANADIAN

PROUDLYCANADIAN

PROUDLYCANADIAN

JOINT REPAIR/ FILLERS AND MEMBRANES

SPEC-MEM RBRMODIFIED ASPHALT EMULSION MATERIAL USING EXACT FORMULATED POLYMERS PROVIDING UNIQUE ELASTOMERIC PERFORMANCE.

SPEC-MEM RBR is designed to bond to most known substrates found in the Construction, Civil, Water Utilities, Waste Water, Mining, Agricultural, Aquaculture, Marine, Automotive, Safety, Industrial, Military, Protective, Commercial/ Residential industries.

Environmentally FriendlyEasy to applyCost EfficientHigh flexibility and strengthLong service life

Excellent bond

PACKAGING4.75 gallon (18 L) units.

FASTPATCH 5000HIGH STRENGTH CONCRETE REPAIR

FASTPATCH 5000 is a flexible and tough concrete repair material with excellent adhesion. FastPatch 5000 is a 100% solids, 2-component urethane designed to meet 5,000 psi compression strength requirements combined with excellent flexibility and resilience. Areas repaired with FastPatch 5000 can be re-opened to traffic in less than one hour.

Rapid cure— as little as 1 hour return to service

100% Solids, no odor

1:1 Ratio by volume—easy application

Excellent concrete adhesion

Minimal equipment requirements

FastPatch at low temperatures when conditioned or catalyzed

Ideal for concrete repairs where high strength material is required

COVERAGECoverage will depend on thickness and width of filled joint.

POLYQUIK® EJC-25POLYQUIK® EJC-25 is a highly flexible, two component, rapid setting, polyurea-based compound for joint filling. EJC-25 is a Class-25 expansion joint compound and has over 1000% elongation.

Rapid Set—return to service within the hour

Self Leveling—flows readily, completely fills joint

Flexible At Freezing Temperatures—does not harden

Passes Hockman Type-25 Testing—dynamically stable

Can be installed at 10 feet

100% Solids 0 VOC—environmentally friendly

Highly Elastic—moves readily with the joint

1:1 By Volume—apply through common equipment

9TECHNOLOGIES INC.

TECHNOLOGIES INC.

TECHNOLOGIES INC.

PROUDLYCANADIAN

PROUDLYCANADIAN

PROUDLYCANADIAN

MEMBRANES

SPEC-MEM CR-ETWO-COMPONENT , 100% SOLIDS EPOXY BASED, CORROSION RESISTANT MEMBRANE.SPEC-MEM CR-E is a corrosion resistant, elastomeric, flexible, 100% solids epoxy which combines the tough-ness, adhesion and durability of epoxies with the flexibility common to polyurethanes. Flexibility is achieved without the use of plasticizers or other additives which migrate from a material as it ages or is degraded due to environmental conditions. Resistance to acids, alkalies and some solvents expands application possibilities. SPEC-MEM CR may be used with fiberglass mesh to bridge larger cracks and joints.

As a flexible membrane where substrate cracking is evident and/or anticipatedAs a flexible membrane prior to the installation of Novolak Polymer Concrete.Primary and secondary containment applications where chemical resistance is important

COVERAGEA 4.75 gal (18 L) unit will cover 300 ft2 (27m2). @ 20 mils.

POLYQUIK® P-480FAST-SETTING POLYUREA COATING

POLYQUIK® P-480 is a two-component, aromatic, sprayable, polyurea, elastomeric coating. It is used as a chemical-resistant, waterproof, protective coating for both vertical and horizontal surfaces. It is resistant to corrosion and many chemicals, including hydrogen sulfide, acids and hydrocarbon solvents. Use POLYQUIK® P-480 where regular thermal or dynamic movement is expected.

Superior properties – excellent crack-bridging

Two-component cure – sets in seconds

Serviceable within 1 hour – reduces facility downtime

Excellent chemical resistance

COVERAGESprayed Yield*: 26 ft2 per gal or 3.8 gal per 100 ft2 at 60 mil DFT(0.63 m2 per L at 1.5 mm DFT)

*assumes 100% transfer

10TECHNOLOGIES INC.

TECHNOLOGIES INC.

TECHNOLOGIES INC.

PROUDLYCANADIAN

PROUDLYCANADIAN

PROUDLYCANADIAN

POLYURETHANE INJECTION

HYDRO GEL™ SXWATER-ACTIVATED, FLEXIBLE POLYURETHANE FOAM OR GEL INJECTION RESIN

Crack injection to seal leaks, particularly structures subject to movement or vibration. Curtain grouting manholes to seal cracks and penetrations. Soil binding for slough control and sidewall support.

Prime Flex Hydro Gel SX is a versatile, easy-to-use single-component, water activated, hydrophilic polyurethane injection resin for sealing actively leaking joints and cracks in below-grade concrete structures. It forms either a closed cell, watertight foam or impermeable gel depending on the water to resin mix ratio. Cured material remains flexible and has excellent adhesion. It can also be used for soil binding for slough control. Independently tested and verified to meet NSF/ANSI Standard 61 for contact with potable water.

Manholes Sanitary sewers

Dams Below-grade concrete walls

Tunnels Elevator service pits

Utility vaults Tanks

Excavation pits Tunneling launch pits

PACKAGING5 gallon pail / 10 oz Single Shot cartridge (case of 20) / 1:1 Quick Mix cartridge (case of 10 includes Gel Reinforcing Agent)

PRIME FLEX™ 920HYDROPHOBIC POLYURETHANE INJECTION RESIN

Prime Flex 920 is a single-component polyurethane injection resin used to seal gushing leaks, including wide gaps in concrete, where the structure is not subject to movement. This hydrophobic, low viscosity polyurethane reacts with water and expands to form a closed cell, watertight, rigid foam. Due to its low viscosity, 920 is also used for permeation grouting of loose soils to consolidate soil particles and increase the load-bearing capacity. (For high strength or large void filling, see Prime Flex 985.) This material requires the use of Prime Kat or Kick Fast Kat to adjust the reaction time from 4-13 seconds.

Sealing leaks and wide gaps in concrete. Examples: - Box culverts, tunnels (subway, water, utility, etc.)

- Manholes, sanitary and storm pipes/structuresCurtain grouting below-grade structures. Examples: - Parking decks

- Foundations and basementsPermeation grouting for soil stabilization. Examples: - Roads and highways

- Seawalls and retaining walls - Sinkhole perimeters (not filling the sinkhole--see 985)

PACKAGING5 gallon pails / 50 gallon drum / 300 gallon tote / 10:1 Quick Mix cartridge (case of 6 with Kick Fast catalyst)

11TECHNOLOGIES INC.

TECHNOLOGIES INC.

TECHNOLOGIES INC.

PROUDLYCANADIAN

PROUDLYCANADIAN

PROUDLYCANADIAN

V2 CFRPCARBON FIBER SYSTEM FOR STRUCTURAL STRENGTHENING

V2 CFRP is a heavy-duty strengthening system for reinforced concrete and timber. It consists of two components: V2 Biscuit Bond Paste for bonding reinforcement and V2 CFRP laminates.

The V2 CFRP system can be used to strengthen reinforced concrete and timber structures that are weakened by: Load increases

Damage to structural parts

A change in previously used structural system

Design or construction defects

CARBON FIBER

REINFORCE-MENTS

V2 T-BISCUITSCUSTOM CARBON/GLASS FIBER REINFORCED PLASTIC LAMINATES

CFRP Tee Joint Biscuits are custom carbon/glass fiber reinforced plastic laminates designed to repair failed flange-to-flange shear connectors of pre-cast double Tee beams. A specially engineered tri-axial carbon fabric is used provide high strength, while a proprietary textured glass fabric is bonded on the exterior face to provide additional toughness as well as a rough bonding surface. The constituent resin matrix is a toughened vinyl ester with proven ability to provide strength along with superior chemical resistance, especially to salt and gasoline. Using a proprietary aerospace composite manufacturing technique, the fabric and resin are combined to form a finished composite laminate. This laminate is then cut to shape using ultra high-pressure water jet cutting equipment.

Easy and fast installation

Minimal disruption to operations

Superior strength and toughness

Chemical resistant

STRUCTUREWRAP™ V2 190 UCCARBON FIBER FABRIC FOR STRUCTURAL STRENGTHENING

StructureWrap V2 190 UC is a proprietary high tensile strength, stitch bonded, unidirectional carbon fiber fabric certified by ICC-ES as meeting building code requirements. The material is combined in the field utilizing StructureWrap V2 200 Epoxy to form a carbon fiber reinforced polymer (CFRP) laminate used to strengthen and/or upgrade structural elements.

Structural capacity changes

Seismic retrofitting

Blast resistant upgrades

Structural damage and repair

CONCRETE PROBLEMSPorosity | Shrinkage / Cracking

Abrasion / Erosion | Temperature Corrosion | Slope / Levelling

Adhesion | Flex / Shear Freeze-Thaw

SOLUTIONSManufacturing | Formulations

R&D | Quality Control Recommendations

Sales-Logistics | Equipment Service | Technique

Training

The Convenient Long-Life Cold Patch Asphalt

REPAIR AND REHABILITATION

CORROSION PROTECTION

REINFORCING WITH FRP

WATERPROOFING AND SEALING

INJECTION EPOXY / POLYURETHANE

SPEC-ROC TECHNOLOGIES

158 Fife Rd, unit 22, Guelph, Ontario N1H 0B2 905 749 3198 | inquiries@specroc.ca

295 Leroux, Chelmsford, Ontario P0M 1L0