داوملا رابتخإ ةزهجأ - MidTechMatest offers the complete equipment for triaxial...
Transcript of داوملا رابتخإ ةزهجأ - MidTechMatest offers the complete equipment for triaxial...
دليل الإختيار
ادمو
الار
تبخ
ة إهز
ج أ
8
14
28
34
10
20
32
38
أجهزة إختبار المواد
Matest © Copyright 2012No parts of this catalogue can be reproduced without the written permission of Matest.Matest ongoing research and development may conceive new products, that cannot be included in this catalogue. Some products may have different countries of origin. Some new items can be available, others can be discontinued. Pictures and descriptions do not bind the company: Matest reserves the right to alter the products specifi cations at anytime without notice.
فهرس إختيار المنتجات
برامج يو تي إم 2
أسفلت | بيتومين
أسمنت
تربة
صخور | حصمة
خرسانة
حديد
أجهزة عامة
4 5
أجهزة إختبار المواد
قرص تفاعلي يمكنكم كذلك الحصول على كتالوج ماتيست العام على قـرص مـرن مـن
وكيـل ماتيسـت الأقـرب لكــم أو بالطلـب من
www.matest.comآخر الأخبار المحدثة على الدوام
مـن خـلال موقـع ماتيسـت التفاعلـي علـى الشـبكة العنكبوتيــة يمكنكم تصفح أكثر من 5000 منتج مع ارقام
المواصفات القياسية والتفاصيل الفنية
موقع ماتيست يجري تحديثه يومياً بآخر المستجدات في الشركة وبالمنتجــات الجديــدة والمطبوعــات وكـذلك بأخبــار
التواجـد فـي المعارض التجارية العالمية
إن هذا الكتالوج يحوي كمية محدودة من الخيارات المصنعـة في ماتيست من أجهزة فحص المواد الخاصة بصناعة الإنشاء.
أما النطـاق الكامـل من المنتجـات والإكسسـوارات وقطـع الغيـارفتجدونها في كتالوج ماتيست العام والذي يصدر بأربع لغات
6 7
أجهزة إختبار المواد
صنع في ماتيست صنع في إيطاليــــا
ISO 9001:2008 مصــــنع معتمـــد ماتيســـت حـاصـلة علـى شــهادة الأيــزو
9001 لتصـميم وصناعة وتقديم الدعم الفني وبيع أجهزة ومعدات القياس لفحص ومعاينة
مواد الإنشاء
خدمات المعايرة ماتيست مؤهلة كمركز ميترولوجي لمعايرة أجهزة الضغط وفقاً
لــــ
LAT No 214
Signatory of EA, IAF and ILACMutual Recognition Agreements
طاقة إنتاجية عالية وفاعلة على أكثر من 6000 متر مربع •
مثابرة متواصلة على البحث وتطوير منتجات جديدة •
منتجات بجودة عالية يمكن الإعتماد عليها طورت من قبل •ماتيست للأبحاث والتطوير
أفضل معدل جودة إلى سعر في الأسواق •
نطاق واسع من المنتجات يحوي أكثر من 5000 بند •
مخزون متكامل ومتوفر لتأمين مدد توريد قصيرة •
خدمات فنية مساندة على درجة عالية من التأهيل •
ماتيسـت هي المصنـع الأول في العالم لأجهزة إختبـار المـوادالخاصة بصناعة الإنشاء
تعرض ماتيسـت حلـول متطـورة للمـواقـع والمختبـرات لفحـص الحصمة والصخور والبيتومين والأسفلت والخرسانة والإسمنت
والحديد والتربةاليوم، ماتيست مؤهلة ومعترف بها عالمياً، وتعتمد على
UNI EN 12390/4, UNI EN ISO 7500/1 and BS 1610/1
8 9
أجهزة إختبار المواد
UTM2 برنامج جهاز الإختبارات العامة 2
قامت ماتيست بتطوير برنامج يو تي إم 2 على أرضية ويندوز لتتيحللمستخدمين إدارة وتحكم أفضل في أجهزتها الرقمية
المرونة، السرعة، الدقة والتخزين الأتوماتيكي للمعلومات هي الميزات الرئيسة لبرنامج يو تي إم 2، الذي أعد لإدارة وتطبيق أكثر الإختبارات تعقيداً حتى من قبل من يتمتعون بمهارات محدودة في
إستخدام الحاسب الآلي
يشمل برنامج يو تي إم 2 على أوجه إختبارات مسبقة الإعداد، متسقة مع المواصفات الأوروبية ومعظم أهم المواصفات القياسية
العالمية
برنامج يو تي إم 2 سهل التحميل والإستخدام، وهو أفضل الحلوللأي فرد يدير إنتاجية عالية و كذلك لمختبرات الأبحاث والفحص
متطلبات النظام رخص برنامج يو تي إم 2 متوفرة بلغات مختلفة )الإيطالية،
الإنجليزية، الفرنسية، الإسبانية، الألمانية، البولندية، التشيكية، السلوفاكية وكذا التركية: اللغات الأخرى متوفرة بحسب الطلب(، ويمكن تحميله على أنظمة التشغيل التالية: ويندوز 2000، ويندوز إكس بي، ويندوز فيستا، وويندوز 7 ) سيتم تطوير البرنامج ليلائم
أي أنظمة تشغيل جديدة تطرح لاحقا(ا
n automatic identification of the machine connected to the PC;
n remote and interactive control of the testing machine;
n easy set up of the operations sequence of the test to be performed;
n customization of test profiles (data setting, properties of the measuring analogue channels and of the speed charts); customization of colours and scales of the graphs and the screens activated; customization of test certificates (document heading, date, test type, graph type and number of pages);
n selection of the algorithms used by the software to process the results required by the Standards;
n visualization of the instant loads; instant definition of the load/deformation/stroke graph with “zoom” function on the graphic points of interest; visualization of emergencies, alarms and possible errors;
n memorization of the test results into a database, that can be elaborated by the operator (test data can be commented by means of text titles to be reported on the certificate or on the graph);
n data storage of all the parameters set for the test, with the possibility to process them again and manage the test archive;
n certificates printing according to a pre-set layout, adjustable and customizable by the operators using their company logo or other information.
ج ام
رنب
يةس
ساالأ
يا زا
لما
A150Ncompression uniaxial and triaxial elastic modulus on rocks
B043-01N Marshall compression tests
B043-02N splitting tensile tests on bituminous mixtures
B043-03N Marshall and Leutner tests
E163Ncompression tests on cement/mortar
E164Nflexural tests on cement/mortar
C123N Servonet for the remote control and management of the testing machines through a PC
S205-08 tensile tests on mortar briquettes
E190Ncompression elastic modulus on mortars
H009Ntensile tests on metals and other materials (plastic, wood, composed materials etc.)
C123-01N compression tests on steel with H011-01n machine
S218NCBr tests on soil
S218-01Nunconfined compression tests on soil
C109-10Ncompression tests on concrete
C109-11Nflexural tests on concrete
C109-12N splitting tensile tests on concrete specimens and block pavers
C123NServonet for the remote control and management of the testing machines through a PC
C104-10N Servo-Strain for the automatic servo-control and management of the testing machines to measure load/strength, displacement and strain
C125Nsecant compression elastic modulus on concrete
ةان
سخر
ور
خص
ةم
صح
تفل
س أ
نمي
توبي
تمن
سأ
يدحد
ةرب
ت
الرخص المتاحة
UTM
2
10 11
أجهزة إختبار المواد
أفران مختبر
A007 ÷ A008-01 KITEN 932-5 / EN 1097-5 / ASTM C127, C136, D558, D559, D560, D698, D1557, D1559
Capacity: from 50 to 750 litres
Made of stainless steel, the ovens are double walled with glass fibre for thermal insulation.
all models are equipped with a digital thermoregulator and a dual safety thermostat.
Available models: • natural convection: series A007
• forced ventilation: series A008
مناخل اختباربشبكة معدنية محاكة أو صفيحة مثّقبة
A031 ÷ A050EN 933-1 / EN 933-2 / ASTM E11
a complete range of test sieves, available in different diameters and in all the openings requested by the international Standards.
all models can be supplied with woven wire mesh or perforated plate with round or square holes.
هزاز مناخل إليكترومغنطيسي
A059-02 KIT EN 932-5
Matest sieve shakers are sturdy and designed with a triple vibrat-ing action (vertical, lateral and rotational). they are supplied with separate digital control panel for the management of the sieving time, the vibrating intensity and the vibrating action (continuous or intermittent).
Different models are available for sieves with diameter from 200 mm to 450 mm, or from 8’’ to 18’’.
جهاز نفاث للتنخيل بالهواء
A058-05NEN 933-10
this model is suitable to sieve powder and dry grain products by using sieves with diameter of 200 mm, in order to obtain sieving results between 5 and 4,000 micron.
قسام عينات كبير السعة
A068EN 933-3 / ASTM C136
a very solid product, totally galvanized for rust protection.
the sample splitter is designed for the reduction of large aggregates (max. diameter of 108 mm) into small samples suitable for laboratory tests.
مطرقة تصنيف صخورمع حامل للصخور
C381 with A121ASTM D5873
the impact hammer is used for rock classification test.
it tests a rock specimen all along its length to obtain an average value of the readings.
impact energy: 0,74 nm
Measuring range: 10 ÷ 60 n/mm2
صندوق محمول لاختبار قص الصخور
A129ASTM D5607
this equipment can be used both on site and in laboratory to determine the strength and slope stability of rocks with max. size of 115x125 mm or cores with max. diameter of 102 mm.فهرس قوة الصخور
جهاز رقمي لاختبار الحمل المركز
A125ASTM D5731
the equipment accepts core specimens with max. diameter of 4” (101,6 mm).
Supplied with a digital display unit:
• range: 0-56 kN
• divisions: 65,000 points
• resolution: 0.001 kN
• accuracy: ± 1%
فك طاحن للأستخدام في المختبر
A092UNE 83120
Designed to crush any kind of material.
the crusher is also suitable to prepare the material to be reduced to powder with the jar mill (series a091).
مقياس الشكلفهرس الشكل
A072EN 933-4 / EN 933-5 / EN 933-7
this product is used for measuring the length-thickness ratio of aggregates.
صخور ׀ حصمة
12 13
أجهزة إختبار المواد
جهاز اختبار مقاومة الإنزلاق والإحتكاك
A113EN 1097-8 / EN 1338 / EN 1339 / EN 1341 / EN 1342 / EN 13036-4 / EN 1436 / ASTM E303
the apparatus is designed to perform polished stone tests on aggregates and to measure pavement surface frictional and skid resistance properties.
جهاز الصقل المتسارعلتحديد قيمة الصقل الصخري
A128NEN 1097-8 / EN 1341 / EN 1342 / EN 1343
the machine measures the resistance of road aggregates, paving stones and blocks to the polishing action of vehicle tyres on a road surface.
the digital control panel at the back side of the machine allows the operator to select the test time.
جهاز لوس أنجيليس
A075EN 1097-2 / EN 12697-17 / EN 12697-43 ASTM C131
this product is used to determine the aggregates resistance to fragmenta-tion.
the machine is supplied with an auto-matic digital counter for the manage-ment of the revolutions.
also available with Ce security cabinet, lined with sound-proofing material for noise reduction.
جهاز اختبـارميكرو ديفال
A077EN 1097-1 / EN 13450
Designed to determine the resistance of aggregates to abrasion.
the machine accepts up to 4 cylinders simultaneously and is supplied with a separate control panel with an automatic digital revolution counter.
also available with Ce security cabinet, lined with sound-proofing ma-terial for noise reduction.
خلايا هويك للاختبار الثلاثي على الصخورA137Used to measure the strength of cylindrical rock specimens subjected to triaxial test.
the Hoek cell is composed of:
• one body complete with two screwed end caps
• two self-sealing couplings
• two hardened, ground, spherical seats and pistons
• one specimen jacket
available in different models and sizes.
Matest offers the complete equipment for triaxial tests on rocks.
الضغط الآحادي والثلاثيمعامل مرونة الصخورautomatic system with pace rate control also during the load release.A150NUNI 9724-8 / ASTM D7012
the system can be used with Matest high stability compression machines with capacity of 2000 or 3000 kn, combined with the automatic servo-controlled system “Servo-Plus evolution” (code C104n, page 21).
the equipment includes: hydraulic system, electronic measuring system and UtM2 software for data acquisition and processing.
the system can be used with:
• electric single use extensometers (strain gages, series C125) or
• universal electronic mechanical extensometers/compressome-ters (code C134)
abrasion machine, Dorry A111
abrasion tester for natural stones and concrete A112
aggregate crushing value apparatus A082
aggregate impact value apparatus A080 KIT
apparatus for crushing resistance determination A081-01
apparatus for thermal and weathering properties of aggregates A103-10
Bar (grid) sieves, en 933-3 A048 KIT
Barton comb, profilometer A122
Bulk density and voids measures A069
Calcimeter, (gasometer) Dietrich-Frühling A105
Chapman flask A029
Chloride content in sand and fine aggregates, rapid Method A019-01
Compression device for rock cores A147
Core drilling barrels for Hoek cells A137-04
Coring machine for rocks, laboratory use A140-01
Crushing coefficient machine A108
Cutting-off machine A127
Desiccators borosilicate glass with perforated plate A035
Deval testing machine A079
Dry mixer A093
efflux index apparatus A073
end-over-end shaker, BS 1377:2 A117
extruder for rock specimens A141
Filler compaction apparatus A124
Flakiness sieves, BS 812 A049-01
Flakiness/thickness gauge A070
Flatness index gauge A048-15
Geological hammers for rocks A132
Hydraulic constant isotropic cell pressure system A142
Jar mills A091-10
Magnesium sulphate test A103
Melting pot A106
Microwave oven A009
Mohs’ kit A115
Moisture meter “Microlance” A021
Muffle furnace A022
Permeability constant oil/water pressure system A144
Polisher, grinder A095
Prism mould for the determination of drying shrinkage, en 1367-4 A107
Quartering canvas A085
reaction container A030
rock permeability apparatus with Hoek cells A144
Sample splitters, riffle boxes A062
Sieve shaker, high capacity A061N
Siphon can apparatus A084
Slake durability apparatus for rocks A130
Speedy moisture testers A025 KIT
Sulphate test strips A019-03
tilt test A122-10
triaxial test on rocks A137
Ultrasonic cleansing bath A104
volumeter for aggregates A086
Wet washing sieves A045
منتجات أخرى
صخور ׀ حصمة
14 15
أجهزة إختبار المواد
جهاز الحلقة والكرة الأتوماتيكي
B070NEN 1427 / ASTM D36
this high technology apparatus has been developed by Matest r&D staff to determine automatically the softening point of asphalts and pitches, assuring high quality and affordable results.
Main features:
• large graphic display 320x240 pixel
• RS 232 port for PC connection
• user-friendly menu for test control during all phases
• top quality components: laser sensors, electronic magnetic stirrer, ceramic glass heating plate
• memory capacity: up to 300 tests
• fully automatic test execution
other model available: manual ring and ball apparatus (code B072).
جهاز ماتيست للدك الدوار
B041EN 12697-10 / EN 12697-31 / ASTM D6925 / AASHTO T312 / SHRP M-002
the gyratory compactor is used to simulate the real compaction conditions achieved under actual road paving operations, hence determining the compaction properties of asphalts.
this model is entirely designed and manufactured by Matest; it works combining an electromechanical rotation with a pneumatically operated vertical pressure.
it accepts standard or perforated moulds for emulsified asphalts with diameter of 100 and 150 mm.
the machine is equipped with digital PC-based (Windows) control unit with full colour and touch screen display for the management, control and visualization of test data, screens and graphs.
مدحلة الدك
B039EN 12697-33
the machine has been developed and manufactured entirely by Matest and is used to produce representative sample slabs of several dimensions of bituminous mixtures laid and compacted on site.
the compaction is performed through a segmented roller with alternated operated rotation which simulates the on-site action of a street roller.
the compaction cycle can be programmed in accordance to a certain load or deformation value.
the flexibility of the program grants the production of samples with uniform density and dimensions, fully meeting Standards specifications and research requirements; these samples are compatible for rut test with Matest Wheel Tracking apparatus B038.
the sample slabs can be also cored or cut off to obtain cylinders and beams for bending fatigue, indirect tensile, static and dynamic creep, stiffness, and 4-point tests.
Main features:
• sturdy frame made of steel
• PC based control unit with full colour and touch screen display
• Internet and Intranet connection for remote technical assistance
• unlimited memory: 2 USB-Host ports and 1 SD card slot
• RS 232/485 serial ports
• Heating of the segment roller (optional)
جهاز مسار الإطارات
B038EN 12697-22 / BS 598:110
Wheel tracker is designed to assess the resistance to rutting of bituminous samples under conditions that simulate closely the effect of slow moving traffic.
the apparatus has a data acquisition and processing system for automatic test control.
the test is conceived for laboratory application: a rubber tyred wheel of outside diameter of 200 mm is loaded with 700N ± 10 (EN Standard) or 520N (BS Standard) and rolled over a rectangular or cylindrical sample held on a moving table under constant and controlled temperature. the load is applied on the sample through a lever and the wheel penetration (rut depth) is measured in real time by means of a linear transducer of 40 mm travel, 0.01 mm accuracy.
Matest Wheel Tracker accepts samples with dimensions up to 400x500 mm, 180 mm high (this mould can be used with Matest roller Compactor).
test results can be automatically downloaded when a serial connection is activated and data transmission to PC is obtained through the rS 232 port. once the results have been sent to a PC, the operator will be able to analyse them - as described by the Standards - and to issue the test certificate.
no software installation is required as data acquisition can be easily obtained through the Hyperterminal program that is provided with almost all computers. the text file can be also imported into Word or excel programs for data analysis and test certificate issue.
التقنية المتميزةمجموعة ماتيست الكاملة من منتجات فحص الأسفلت
أسفلت ׀ بيتومين
16 17
أجهزة إختبار المواد
جهاز محتوى البيتومين بطريقة الإشعال
B005EN 12697-39 / EN 13108 / ASTM D6307 / NCAT
(national Centre for asphalt technology)
The unit provides automatically the asphalt content of bituminous paving mixtures with an accuration of 0.11%.
the ignition method is fast, accurate, environmentally friendly and cost effective, and replaces the costly and time consuming solvent extraction method.
وحدة إستخلاص البيتومين الأتوماتيكية
B008EN 12697-1 / EN 13108 / ASTM D2172
Used for precise and reliable analysis on bituminous mixtures. it determines the quantity of binder or bitumen contained in pavement samples and hot mixed mixtures by means of no cancer producing solvents (PCe), r40 classification.
جهاز الإستخلاص بالطرد المركزي سعة 1500/3000 جم
B011EN 12697-1 clause B.1.5 / EN 13108 ASTM D2172
the centrifuge extractor is used for the determination of bitumen percentage in bituminous mixtures.
Supplied complete with rotation speed regulator and digital display for frequency monitoring.
other models available: “explosion proof” (code B011-01) and centrifuge with safety electromagnetic micro-switch system.
إطار تحميل مارشال رقمي طاقة 50 كن
B043 KITEN 12697-34 / EN 12697-23 / EN 12697-12 / EN 13108 /
ASTM D1559 / ASTM D6927-06
ruggedly manufactured and easy to use, Marshall digital frame can be equipped with different accessories to perform:
• Marshall test
• direct shear test (Leutner) on bituminous specimens
• indirect tensile test on bituminous mixtures
The machine is equipped with Cyber-Plus Evolution digital control unit, 8 channels.
مدكات مارشال الأتوماتيكية
(different models are available)
B031NEN 12697-10 / EN 12697-30 / ASTM D1559 / ASTM D6926
Marshall compactors are used to determine the compactability of hot mix asphalt.
available models: manual or automatic compactors for moulds of different diameters, in accordance to en and aStM Standards.
وعاء فراغي سعة 10 لتر
B067NEN 12697-5 / EN 13108 / ASTM D2041
Determination of theoretical maximum specific gravity of uncompacted bituminous paving mixtures (Rice-Test).
this product is designed for a rapid determination of: asphalt content in bituminous mixtures, bulk specific gravity of aggregates, max. theoretical specific gravity of bituminous uncompacted road mixtures, and percentage of air voids in compacted mixtures.
أجهزة إختبار الإختراقيةقياسية، نصف أوتوماتيكية، بساعة قراءة أو رقمية
B056 KIT / B056-01 KITEN 1426 / ASTM D5
ruggedly constructed, Matest penetrometers are used to determine the consistency of a bituminous sample under fixed conditions of load, time and temperature.
the penetration is expressed in distance of tenths of millimeters vertically penetrated into the sample by a standard needle.
available models: standard or semi-automatic, dial or digital.
جهاز إستخلاص بالطردالمركزي ذو التدفق المستمر-بدون فلتر
B014EN 12697-1 clause B.2.1 / EN 13108 / ASTM D1856
Designed for a quick filterless separation of filler from binder solution - or other mixtures containing sediments in suspension (cement, soil, clay) - by means of the continuous flow system (11500 rpm).
أسفلت ׀ بيتومين
18 19
أجهزة إختبار المواد
air bath for bitumen B016
asphalt emulsions: storage stability determination B063-05
asphalt indentation penetrometer B059-10
asphalt oven with rotating shelf, tFot method B064 KIT
automatic digital penetrometer B059 KIT
Bacon sampler B060
Bearing plate for road pavements B103-10
Binder recovery apparatus, vacuum pump method B018
Bituminous binders: determination of solubility B075-05
Bituminous emulsions: determination of particle polarity B063-10
Bituminous emulsions: determination of penetration power B075-08
Bituminous emulsions: determination of settling tendency B075-01
Bituminous emulsions: mixing stability with cement B076-23
Bituminous emulsions: residue on sieving B076-21
Bottle rolling machine B022
Breaking value of cationic bitumen emulsions, mineral filler method B090
Cabinet with aspirator B079
Cabinet with aspirator for automatic extraction unit B008-10
Cleveland tester B086 KIT
Cohesion tester B053-10
Cyber-Plus Evolution, 8 channels touch screen control unit B044N-SET
Dean-Stark, water in bituminous materials B076
Distillation of cut-back asphalts B069 KIT
Drainage basket for binders B022-20
Duriez test set, moulds B095-01
electromagnetic Density Gauge “non nuclear” B111
emulsified asphalt distillation apparatus B063 KIT
Fraass apparatus B077 KIT
Hot extraction apparatus, wire mesh filter method B017 KIT
Hot extractor set, paper filter method B016-10
Hot plate with magnetic stirrer B073-01
Hot plates B074/V200
Kumagawa extractor (Soxhelet) B061 KIT
Marshall compacting equipment B029 KIT
Marshall compactors, manual B032 KIT B032-01
Marshall stability mould B046N
Mixers for bitumen B027
Mot straight edge B099 KIT
P.r.D. mould B097
Pav, Pressure ageing vessel B091
Pensky Martens digital flash point tester B094 KIT
Permeameter for draining pavements B024
Permeameter, radial-flow falling head B024-10
Planetary abrasion tester, en 12274-5 B053-20
rate of spread device B053-05
reflux extractor B019 KIT
rotary evaporation apparatus B065
Sand patch equipment B099-10
Solvent recovery still B021
Soxhelet modified method B016-20 KIT
tag closed-cup viscometer, flash point B092 KIT
tensile splitting device for bitumen B047-02
travelling beam device B098
vialit, binder adhesion test B053
Water bath for bitumen penetrometer B058
Wilhelmi softening point apparatus B072-20
فرن إختبار الرقائق الدوارة
B066 KITEN 12607-1 / ASTM D2872
the oven measures the air and heat effect on a moving film of asphaltic semisolid materials.
Made of stainless steel with an insulated fiberglass intermediate chamber, the oven is provided with a large glass door for inspections and a dual safety thermostat to prevent accidental over-heatings.
حمامات مائية لعينات المارشال، قياسية ورقمية
B052EN 12697-34 / EN 13108 / ASTM D1559 / ASTM D5581
Water baths are suitable for general laboratory use and conceived to maintain specimens submerged into water at a constant temperature of:
• 60°C ± 1°C for Marshall specimens
• 37.8°C ± 1°C for asphalt specimens
available models: baths with analog or digital thermostat, baths with cooling device.
أجهزة قياس اللزوجة
B080EN / ASTM
these products are used to determine the specific viscosity of road-oils, tars and petroleum products.
Matest offers a complete range of viscometers with 1 or 2 elements: Engler, Standard TAR (Brta, redwood) and Saybolt.
all models are made of steel and equipped with digital thermoregula-tor and dual safety thermostat.
جهاز قياس الممطولية، قياسي ورقمي
B055-10EN 13589 / EN 13398 / ASTM D113
Ductilometers are made of stainless steel with fibreglass insulation for the determination of bituminous ductility.
advanced models:
• B055-10 ductilometer with data acquisition system Cyber-Plus Evolution 8 channels;
• B055-20N ductilometer with data acquisition system Cyber-Plus Evolution 8 channels, “high performance”; it accepts up to 3 specimens.
جهاز التحميل اللوحي لمواد رصف الطرق
B103-05 KITNF P94-117-1
Designed to calculate the static deformation of flexible road pavement (ev2) in the centre of the loading plate.
the equipment consists of: 600 mm dia. bearing plate made of cast aluminium with reinforcing ribs and coupling device, hydraulic loading jack 200 kn capacity, hand pump, rubber pipe with fast connector, set of extension rods of different lengths, carrying case, precision pressure gauge 0-200 kn div. 1 kn, and upper spherical seat.
جهاز عارضة بنكلمان
B100the apparatus is made of aluminium alloy and supplied complete with dial indicator and accessories.
it is used to measure the deflection of the road surface when loaded by the wheels of vehicles.
the measurement of the deflection is performed when the vehicle passes over the test area.
available models:
• B100 in accordance to CNR N° 141
(beam fulcrum ratio 4:1)
• B102 in accordance to NF P98-200-2 / AASHTO T256-77
(beam fulcrum ratio 2:1)
منتجات أخرى
أسفلت ׀ بيتومين
20 21
أجهزة إختبار المواد
السايبر-بلس المطورة
C109NA new PC-based and TOUCH SCREEN control unit produced with the latest technology for the management and control of SEMI-AUTOMATIC TESTS on construction materials.
Cyber-Plus evolution control unit can be also installed on concrete/mortar compression and flexural machines not manufactured by Matest.
السيرفو-بلس المطور
C104NA new PC-based and TOUCH SCREEN control system produced with the latest technology for the management and control of FULLY AUTOMATIC TESTS on construction materials.
tHe SYSteM iS CoMPoSeD oF:
• Cyber-Plus Evolution C109N +
• multi-piston electric pump with variable flow driven by a microprocessor
aCCeSSorY:
• console for Servo-Plus Evolution (code C104-04)
PoWer SUPPLY: 230v 1 ph 50Hz 750W
السيرفو-بلس المطور مع وبدون غطاء لوحدة التشغيل
الإبداع يمر من هنا
السايبر-بلس المطورةالإرتقاء الإلكتروني مع ثمان مداخل تناظرية
التشغيلي ويندوز نظام مع آلي كحاسب تعمل لمسية بشاشة الإبداعية التحكم وحدة
ثمان مداخل تناظرية للربط مع ثمان خلايا تحميل أو وحدات إستشعار •
مصممة لتعمل كحاسب آلي بنظام ويندوز التشغيلي •
إتصال مباشر مع الإنترنيت للحصول على مساعدة فنية عن بعد •
شاشة لمسية بالألوان، 1/4 في جي آي •
تفاعل ودي مع المستخدم + لوحة تحكم بخمس أسهم •
مزودة بطابعة تخطيطية •
زر إيقاف للطوارئ •
ذاكرة غير محدودة – 2 مداخل يو إس بي، فتحة بطاقة أس دي •
إمكانية ربط عدد 2 من إطارات التحميل أو خلايا الضغط أو وحدات الإستشعار •
تحكم عن بعد وإدارة للوحدة عن طريق لوحة مفاتيح الحاسب الآلي •
تعمل بـ 220 فولت ، 1 فاز، 50/60 هيرتز، 70 وات •
خرسانة
22 23
أجهزة إختبار المواد
أوسع نطاق من أجهزة إختبار الضغط والإنثناء للخرسانة
توفر ماتيست إمكانية ربط وتوليف الأجهزة للحصول على مجموعة من إطارين أو أكثر تعمل
من خلال وحدة تحكم واحدة
رخصة برنامج معامل مرونة الخرسانة بالضغط القاطع
تنتج ماتيست أوسع نطاق من أجهزة إختبار الضغط والإنثناء للعيناتالخرسانية المتفقة مع المواصفات القياسية العالمية الإطارات:
إطار من أربع أعمدة مسبقة الإجهاد • إطار من أربع أعمدة عالية الإستقرار •
تعمل بـ:يدوياً أو آلياً •
نظام القياس:عداد )ساعة قياس( مفرد •عداد )ساعة قياس( مزدوج •وحدة تحكم ذات قناتين •وحدة تحكم تعمل باللمس ذات 8 قنوات •
نوع العينات:مكعبات، إسطوانات وبلوكات بمقاسات مختلفة •
الطاقة:الضغط: •
ك1300 كن، 1500 كن، 2000 كن، 3000 كن، 5000 كنالضغط في الأجهزة عالية الإستقرار: •
ك2000 كن، 3000 كن، 5000 كنالثني في الإطارات مغلقة ومفتوحة الجوانب: •
ب150 كن، 200 كن
C125N
خرسانة EN, ASTM, AASHTO, BS, NF, UNI, DIN, UNE
24 25
أجهزة إختبار المواد
مجموعة إختبار قمع الهبوط
C180 KITEN 12350-2 / EN 12350-8:2011 / ASTM C143
Matest offers different slump cone test sets, each one supplied with different accessories:
• complete set for laboratory tests, with stainless steel cone
• complete set for laboratory tests, with galvanized steel cone
• portable set for on-site tests, with stainless steel cone
• portable set for on-site tests, with galvanized steel cone
إختبارات على الخرسانة الطازجة ذاتية الدمك
C172EN 12350-8 / EN 12350-9 / EN 12350-10 / EN 12350-12 / ASTM C1621
Matest manufactures a complete range of equipment for:
• free flow and time flow determination “Spray test”
• flow time determination from a funnel “v-Funnel”
• confined flowability determination with “L-shape box”, “U-shape box” and “J-ring apparatus”
أحواض مائية لمعالجة العينات الخرسانية
C302 KITEN 12390-2 / ASTM C31 / ASTM C192 / ASTM C511
Curing tanks made of heavy plastic or steel to cure concrete specimens.
Capacity: 550, 650 or 1000 litres.
Supplied with analog or digital thermostat.
طاولات هزازة
C278EN 12390-2
these tables are made of rugged steel sheet and used to compact concrete specimens in labora-tory.
Different models are available: for laboratory use, portable, with control panel or with pedal switch.
قوالب بلاستيكية وحديدية
C223 ÷ C247these moulds are used to prepare concrete specimens: cubes, cylinders and beams.
available in many different models made of hard plastic, steel or cast iron. all Matest moulds are strong and resistant to wear action, allowing the operator to use them many times.
جهاز صقل العينات
C298EN 12390-2 / ASTM D4543
the machine is made of rugged plate and designed to grind and polish cubical and cylindrical specimens of concrete, blocks, natural stones, rocks, ceramic materials etc.
the specimens are easily fixed to the table through the appropriate locking stirrups, allowing the machine to grind many specimens at the same time.
other model available: automatic grinding machine (code C299).
أجهزة حفر القلوب الخرسانيةتعمل بالكهرباء أو الوقود البترولي
C319-02EN 12697-27
Matest supplies a wide range of core drilling machines designed to drill cores of concrete or bitumen.
available models, supplied with diamond bits and accessories:
• lightweight and portable machines
• robust machines for road pavements
• drilling machine with vacuum facility
جهاز قياس الهواء المحتجز في الخرسانة سعة 5 لتر
C195EN 12350-7 / ASTM C231 type A
Made of cast aluminium alloy, it records directly the percentage of air included in a fresh mixed concrete.
the equipment is supplied complete with pressure gauge, tamping rod, and hand operated pump.
جهاز فيبي للإستقرارية
C183EN 12350-3 / ASTM C1170-92
the equipment is used to determine the consistency and density (workability) of concrete rolled up and compacted by means of the vibrating table.
vebé consistometer is based on the same principle of the slump cone test method, but it offers the advantage of a mechanical action.
Matest offers both en and aStM versions.
هزاز )رجاج( بوكر
C270EN 12390-2 / ASTM C31 / ASTM C192
Poker vibrators are conceived for the compaction of specimens both in laboratory and on building site.
Models available:
• with electric motor
• with petrol engine
• battery operated
خرسانة
26 27
أجهزة إختبار المواد
المطارق المرتدة لفحص الخرسانة، قياسية ورقمية
C380 / C386NEN 12504:2 / ASTM C805
MateSt oFFerS tHe CoMPLete ranGe oF eQUiPMent For nDt teStS
Manufactured by Matest with selected components and accurate processing technique, Matest rebound test hammers are the top quality models available on the market, en-suring high precision and affordable results.
the rebound hammers are used to perform non-destructive tests on concrete struc-tures/buildings, providing an immediate information of concrete compressive strength as requested by the rebound method.
available models:
• standard of 2,207 Joule
• standard of 2,207 Joule with calibration curve chart in psi
• standard of 0.735 Joule
• digital with microprocessor
مطرقة مرتدة لفحص الخرسانة مع سندان للمعايرة
جهاز قياس سرعة النبضات الفوق صوتية
C372NEN 12504:4 / ASTM C597
Manufactured by Matest with the latest technologies, the instrument measures the ultrasonic impulse speed during its passage through a material (provided the distance between the probes).
the tester has a colour and touch screen display (1/4 vGa), Windows Ce operating system, Compact Flash interface, SD card, USB, RS 232 and RS 485 ports.
Matest ultrasonic pulse velocity tester offers the possibility to visualize the shape of the transmitting wave while it goes through the material under test, transforming the instrument into a real oscilloscope with the “Scope” mode.
it also offers the possibility to perform combined “ultrasonic and rebound” test in accordance to the Sonreb method.
مطرقة فحص رقمية
منتجات أخرى
abrasion tester Böhme C129
accelerated curing tank for concrete C307
accessories for concrete compression/flexural machines C097-01
air entrainment meters for concrete C195
automatic servo-controlled system for pressure regulation C104N PL
autotec, automatic control unit with two channels C098N
Canin: corrosion analysing instrument C411
Capping compound equipment for concrete specimens C290-01
Capping compound filler C290-06
Capping retainers for concrete testing machines C107-09
Carbonation test C375-02
Cementometers C214
Chloride field test system C375-01
Climatic controlled cabinet:-20°C + 60°C C314
Compacting factor apparatus, BS C185
Compressometer/extensometer for concrete C133
Compressometers for concrete C130N
Corrosion determination in reinforcing bars, array meter C412-01
Crack detection microscope C399
Crack width gauges for concrete C408
Curing room for concrete C309-10
Deflectometer with telescopic tubular displacement transducer C405-10
Deflectometers swing-arm models C405N
Demoulding oil C265
Device for deflection on fiber reinforced concrete C090-15
Device for flexural/punching tests on clay blocks C093-11
Device for punching test on sprayed concrete C090-14
Device for splitting tensile test on concrete C100
Diamond bits for concrete and bitumen C340-05
Diamond blades C350-12
Digitec, semi-automatic control unit with two channels C108N
electro-Hydraulic loading and control system C109-09N
Flat jacks, test on brickworks C358-01
Flow table for concrete, manual C192 KIT
Flow tables C208
Footmeter calibrators for testing machines C155N
Go-not go gauge C250-16
Hydraulic shrinkage determination equipment C365
Hydro-Plus evolution, semi-automatic console for testing machines control C109-03N
impact failure test on tiles and paving materials C096
Joisel apparatus C211
K-slump tester C187
Load cells, standard and high performance C140
Machine for compression test on concrete pipes 1000 kn C093-05
Machine for deflection test on fiber reinforced concrete beams C090-07N
Machine for flexural test on tiles C095
Machine for punching test on sprayed concrete specimen with measurement of energy absorption C090-07N
Mechanical strain gauges C360 KIT
Metal detectors, Profometers C396/C397
Micro-coring equipment for rocks and concrete C377
Moisture meter Surveymaster C374
Pan type mixers for concrete C162
Penetrometer for concrete C213
Penetrometer, Kelly ball apparatus C186
Penetrometer, pocket model for concrete C194
Plasticity meter C190
Plate bearing equipment: data acquisition/management system C405-15N
Portable digital press C094
Portable electric generator C332
Pressure transducers for cement and concrete testing machines C116-01N
Profoscope C403-01
Pull-out, Pull-off C376N
Pumping units C113/C114
raM, rapid analysis machine C215
resonance frequency meter C393
rule right angle for moulds and specimens C250-10
Servo-Strain, software for the automatic control of the machines to measure load/displacement/strain C104-10N
Software for “Footmeter”calibration C155-10N
Software for compression test on concrete C109-10 C109-10N
Software for compression test with H011-01n machine C123-01N
Software for elastic modulus on concrete C125N
Software for flexural test on concrete C109-11 C109-11N
Software for tensile splitting test on concrete C109-12 C109-12N
Software Servonet for the remote control of the machine through PC C123 C123N
Specimen cutting machine for concrete C350
Specimen cutting machine for metal bars C351
Specimen cutting machines for rocks C348N
tester/calibrator for testing machines, digital C138N
thermometer, infrared C303-10
thermometers, logging and printing C303
trimming/cut-off machine for cores C377-05
Ultrasonic “cross-hole” system C373-10
Ultrasonic pulse velocity tester for concrete C369N
Unit weight measurer, density of fresh concrete C199
Unit weight measurers for concrete C200
vaporizer for rooms C311-01
Walz consistometer C188
Water impermeability apparatus for concrete C435
Water permeability apparatus, automatic C430
Water test set for concrete mixing water C220
Water/air permeability of concrete C375-10 KIT
Windsor probe C410
Workability meter for concrete C189
خرسانة
28 29
أجهزة إختبار المواد
فيكاترونيكجهاز فيكات الأوتوماتيكي
E044NEN 196-3:2005 / EN 13279-2 (gypsum) / EN 480-2 / ASTM C187 / ASTM C191
Matest has designed and produced vicatronic, the most used vicat apparatus in the world.
vicatronic is manufactured by Matest with “anticorrosion and tropicalized” components. it is used for the determination of the initial and final setting time of cements or mortar pastes.
the complete test is performed automatically and gives very precise and repeatable results. test data are printed on the incorporated printer, thus removing the manual operations of installing and zeroing the paper graph on the drum.
other models available: manual version (code e055n) and with accessories for test on gypsum.
خلاط العجينة الإسمنتية الأوتوماتيكي القابل للبرمجة
E092N KITEN 196-1 / EN 196-3:2005 / EN 413-2 / EN 459-2 / EN 480-1 / ASTM C305
automatic, programmable, and computerized mortar mixer “high performance”.
Suitable for intensive laboratory use, this model allows the operator to set different automatic mixing cycles in accordance to the procedures described by the afore-mentioned international Standards.
the operator can set up to 5 automatic and customized mixing cycles through the PC.
تفاصيل خلاط العجينة الإسمنتية
توفر ماتيست إمكانية ربط وتوليف الأجهزة للحصول على مجموعة من إطارين أو أكثر تعمل
من خلال وحدة تحكم واحدة
رخصة برنامج معامل مرونة الإسمنتوالعجائن الإسمنتية بالضغط
تنتج ماتيست أوسع نطاق من أجهزة إختبار الضغط والإنثناء للإسمنت والعجائن الإسمنتية
والصخور والطوب المتفقة مع المواصفات القياسية
العالمية
تعمل بـ:يدوياً أو آلياً •
نظام القياس:عداد )ساعة قياس( مفرد •عداد )ساعة قياس( مزدوج •وحدة تحكم ذات قناتين •وحدة تحكم تعمل باللمس ذات 8 قنوات •
نوع العينات:مكعبات، عينات منشورية أو أجزاء منها وإسطوانات بمقاسات مختلفة •
الطاقة:الضغط:ط •
ك250 كن،300 كن، 500 كن الضغط والإنثناء في الأجهزة ثنائية نطاق القياس: •
ن300/50 كن، 500/15 كن، 250/15 كن الضغط والإنثناء مع نطاقين مستقلين للقياس وحجرة ثنائية للإختبار: •
250/15 كن
إسمنت
E190N
EN, ASTM, AASHTO, BS, NF, UNI, DIN, UNE
30 31
أجهزة إختبار المواد
طاولات التدفق
E090-01 KITEN 459-2 / EN 1015-3 / ASTM C230
Used to determine the workability of mortar and lime.
Supplied with cone mould - made of bronze - and tamper.
available models: hand operated or motorized with digital drop counter.
حهاز الهز )الرج(ج
E130EN 196-1
the equipment is conceived to compact mortar prisms of 40x40x160 mm contained into a three gang mould.
it is supplied complete with separate control panel including start/stop buttons and with automatic digital drop counter.
other model available: jolting apparatus “high performance” (code e131).
قالب من ثلاث خانات
E102EN 196-1
Mould for 40,1x40x160 mm specimens.
Made of steel with “hardness of inside walls over Hv 200”.
all surfaces are grinded and all parts are marked with an identification number for a correct assembling.
a part-number is engraved on each mould and a Certificate of Conformity is supplied along with.
حمام ليشاتليه المائي مع قالب
E064 with E065EN 196-3
the equipment is used to determine the soundness of cement specimens both in boiling and cold water.
the inside chamber of the water bath is made of stainless steel and bring the Le Chatelier moulds to the boiling point when immersed in water.
the moulds are made of brass with chromed finishing. other models available: with bigger size pointers and “individually tested”.
كابينة معالجة، حجم كبير
E138EN 196-1
this cabinet is suitable for curing large quantities of mortar, cement and concrete specimens at controlled humidity and temperature.
it is made of aluminium and policarbonate, and supplied with 4 shelves and digital thermoregulator.
Matest also offers a wide range of water baths of different capacities for mortar specimens curing and general laboratory purposes.
جهاز القلعE142Digital bond strength tester, 16 kN capacity
EN 1542 / EN 1348 / EN 1015-12 / EN 13687-2 / EN 13963 / EN 14496
the dynamometer measures the adhesive force and the tensile strength of two layers of materials (concrete, facing plasters, mortars, building plasters, lime etc.) being particularly recommended for the maintenance of concrete surfaces.
the equipment is compact, light, easy to handle, and can be used in any place and position. Pull-off is supplied with load cell and high resolution digital display.
other model available: Pull-off tester 0-5 kn capacity (code e142-01).
جهاز بلين لإختراقية الهواءقياسي وإلكتروني
E009 KITEN 196-6
Used to determine the fineness of Portland cement. available models:
• standard E009 KIT
• electronic E011
• electronic and automatic E011-01
قوالب ليشاتليهقياسية وموثقة
منتجات أخرى
accessories for cement/mortar flexural machines E172-01
accessories for compression/flexural machines E170 / E172-01
air content in mortar: measurers E029
air content meters for mortar E027
apparatus for lime testing reactivity, en 459-2 E034
apparatus for settling and swelling ratio of grouts E036 KIT
autoclave for soundness test E070
Bar container for potential alkali reactivity determination E067-05
Baroid mud balance E037-01
Bulk cement sampler E020
Bulk density of cement E025
Bulk density of lime E091
Calcimeter, Dietrich-Frühling A105
Calorimeter for cement E061N
Calorimeter, Langavant E062-10
Determination of free expansion in plastic period E060
Determination of restrained expansion of concrete/mortar E114
Dewar flask E062-01
Dropping ball apparatus E031
Filter press for muds E037-05
Fineness of fly ash by wet sieving E017
Flow cone apparatus E038
Funnel groove for grouts, UNI 8997 E059
Gillmore apparatus E058
Le Chatelier flask E014
Length comparator for linear variations of mortar specimens E077 KIT
Marsh funnel viscometer E037
Mixers for mortar E093 / E095
Mould nF for craking test E067
Moulds for mortar specimens E102 / E112
Moulds for soundness and shrinkage tests E072 / E113
Pat test E082
Penetrometer for mortar, italcementi model E050
Plaster extensometer for gypsum E080
Plunger penetration apparatus for masonry cement/building limes E083
reference sand for mortar E097-01N
Sand content of drilling muds E037-10
Setting time determination of gypsum E044-40N
Slaking vessel for building lime/yield, en 459-2 E035
Software for compression test on mortar E163 / E163N
Software for elastic modulus on mortar E190N
Software for flexural test on mortar E164 / E164N
Steam bath for soundness of building lime E081-10
Stiffening time determination of concrete E083-10
vibrating machine for mortar cubes E132
Water baths for cement curing E136 / E139
Water flowing sieves device E016
Water refrigerator E141
Water retention apparatus for cement E039N
Workability apparatus for mortar E081
إسمنت
32 33
أجهزة إختبار المواد
حــــديد
accessories for compression test on metals H003-13
accessories for flexural test on concrete H003-22
accessories for flexural test on metals H003-11
accessories for test on electro welded wire nets H003-14
accessories for compression test on concrete H003-21
Bending test on metals H003-12
Broaching machine H057
Charpy pendulum tester for resilience tests H060
Cooling bath for resilience tests H052
Cutting machine for specimens C351
Dry-ice maker H050
extensometer for load/deformation H014
extensometer, wire strands H003-18
Machine for tensile tests on metals, plastic materials, wires, textiles S205-05
Machine, hydraulic and servo-controlled, for static tensile test on steel 600 kn H002N
Machines for tensile test on steel and compression test on concrete, 500/1500 kn H010 / H011-01N
Machines, servo-controlled and electromechanical, for tests on steel 10/600 kn H004 / H008
Marking-off machine H020
Software for tensile test on metals, plastic materials, wires, textiles H016
Software for tensile test on steel H009N
جهاز الإختبارات العامة الهيدروليكيذو التحكم السيرفي طاقة 600 كن
H003NServo-controlled machine with digital TOUCH SCREEN system to per-form static tensile tests on metals. EN 10002 / EN ISO 6892 / EN ISO 7500-1 / ASTM A370
the machine is designed to perform both tensile tests using the grips placed in the clamping heads, and also flexural, compression, bending, hardness, dish-ing and other tests in the upper part of the frame - between the head and the traverse - in accordance to the international Standards.
the hydraulic servo-controlled unit regulates the load rate through the computer.
جهاز فحص الثني البارد
H065NEN ISO 7438 / EN 10080 / EN ISO 15630-1 /
ASTM A615 / ASTM A615M
the machine has been designed to perform bending tests on steel bars for reinforced concrete.
it accepts bars with diameter up to 40 mm and it is supplied with two series of rollers, having respectively a diameter of 50 and 100 mm.
Different models of mandrels, mandrel-holders and brackets are available and have to be ordered separately.
جهاز عام لإختبارات الشد والضغط
H011-01NEN 10002 / EN ISO 6892 / EN ISO 7500-1 / ASTM C39 / ASTM E4
Servo-controlled testing machine with toUCH SCreen control unit.
this machine has a compact design and is used to perform tensile tests on steel reinforced round bars with a diameter from 6 to 25 mm, and flat bars with max. dimensions of 25x15 mm (max. capacity: 500 kn).
it can also carry out compression tests on concrete cubes with max. side of 150 mm, and cylinders with max. diameter of 160x320 mm (max. capacity: 1500 kn).
an hydraulic selector allows the operator to select the tensile or the compression test.
the four columns loading frame is overdimensioned to provide high rigidity and stability.مقياس إستطالة لجدائل الأسلاك
مقابض للعينات المسطحة والمستديرة
مقياس إستطالة إلكتروني لاختبار قوة التشوه الإستطالي
حتى الكسر
منتجات أخرى
34 35
أجهزة إختبار المواد
تــــــربة
جهاز الدمك اأوتوماتيكي للسي بي آر والبروكتور
S199 EN 13286-47 / ASTM D698 / ASTM D1557 / ASTM D1883
Designed to compact Proctor and CBr specimens, it provides an extremely uniform compaction degree, granting reliable and repeatable test results.
the software allows to select and perform automatically different compaction cycles in accordance to the international Standards (en, aStM, aaSHto, nF, Din, Une, Cnr, BS).
the operator can select and memorize up to 10 customized test cycles.Different models of moulds and rammers are available, in accordance to the Standards.
إطار إختبار الضغط الرقمي العام المتعدد السرعات
S216 KITEN / ASTM / BS / NF
Matest manufacturers a wide range of machines for CBr, Marshall, Unconfined and tensile splitting tests on soil specimens.
available models:
• CBR machines: manual, motorized 50 kN or digital computerized 50 kn capacity
• dual speed CBR/Marshall load frame 50 kN or dual speed CBr/Marshall digital computerized load frame 50 kn
• universal multispeed load frame 50 kN or multispeed digital computerized load frame 50 kn
Most of them can be managed through the digital control unit Cyber-Plus 8 evolution (code B044n-Set).
the values are measured by a load ring with dial gauge or by a digital control unit with electric load cell and linear displacement transducers.
إطار الضغط الثلاثي الرقمي 50 كن
S301BS 1377:6 / BS 1377:7 / BS 1377:8 / ASTM D2850 / ASTM D4767
ruggedly manufactured, the triaxial load frame has been designed for geotechnical laboratory purposes and for the execution of the following tests:
• “UU” unconsolidated undrained test
• “CU” consolidated undrained test
• “CD” consolidated drained test
the machine accepts every type of standard triaxial cell up to 100 mm diameter by 200 mm height.
يونيترونيك 50 كن
S205 Universal multipurpose frame for:
• compression/flexural tests, 50 kN max. capacity
• tensile tests, 25 kN max. capacity
on different kind of materials with automatic load or displacement/deformation control (asphalt, con-crete, cement, mortar, soil, rocks, clay blocks, met-als, plastic materials, wires).
other model available: “Multi-Tester” 200 kN (code S206).
نظام جمع ومعالجة المعلومات الأتوماتيكي للإختبارات الجيوتقنية these systems can be used both with Matest testing machines (oedometers, CBr/Marshall machines, triaxial machine, shear test apparatus etc.), and with equipments manufactured by other firms, subject to mechanical adjustments.
وحدة سايبر-بلس المطورة ذات 8 قنوات، بشاشة تعمل باللمس
S335N8 channels data acquisition and processing system with full colour touch screen display.the unit can be connected to the PC through the USB port and it prints the test certificate.equipped with slots for external memory supports (pendrive or SD Card). Unlimited memory.
وحدة داتاترونيك ذات 16 قناة، القابلة للتوسع إلى 64 قناة تناظرية
S336
جهاز إختبار القص المباشر/المترسب
S277 KITASTM D3080 / BS 1377:7
the apparatus establishes the resistance to shearing of all types of soil specimens: consolidated - both drained and undrained – undisturbed, or remoulded samples.
Matest offers 3 different models:
• standard version
• digital version with incorporated data acquisition system
• digital version with incorporated data acquisition system, fully automatic functioning
وحدة قياس التماسك ذات التحميل الأمامي
S260ASTM D2435 / ASTM D3877 / ASTM D4546 / BS 1377:5
the oedometer is conceived for consolidation test on soil specimen which is axially loaded and laterally contained. the machine determines the settlement characteristic of the specimen in a given period of time.
available models:
• front loading oedometer with dial gauge or digital data acquisition system (code S260)
• Edotronic, automatic and pneumatic consolidation apparatus (code S262)
إكسسوارات جهاز إختبار القص
إكسسوارات لوحدة قياس التماسك
36 37
أجهزة إختبار المواد
أجهزة التحمل اللوحي القياسية والرقمية 100 كن، 200 كن، 500 كن
S224-01 KITASTM D1194 / ASTM D1195 / ASTM D1196 / BS 1377:9
the bearing plate is used for the determination of the bearing capacity and deformation modulus of soils on road constructions, foundations, road subgrades, airport and highway pavements. Different models are available, each one equipped with different accessories in accordance to the international Standards:
• plate bearing equipment 100 kN with 1 dial gauge, with 3 dial gauges or with 3 transducers and Cyber-Plus Evolution data acquisition and processing system
• plate bearing equipment 200 kN with 3 dial gauges or with 3 transducers and Cyber-Plus evolution data acquisition and processing system
• plate bearing equipment 500 kN with 3 dial gauges or with 3 transducers and Cyber-Plus evolution data acquisition and processing system
هزازات المكافئ الرملي الميكانيكية
S160-01NEN 933-8 / ASTM D2419
three models are available:
• hand operated with handle
• automatic and motorized
• automatic and motorized with steel security cabinet
حد السائل: طريقة كازجراندي
S170ASTM D4318 / NF P94-051
the equipment establishes when a clay soil changes from a plastic to a liquid state.
two models are available:
• hand operated with left side or right side crank (the base could be made of bakelite or hard rubber)
• motor operated through an electric motor that lifts the cup at 120 drops/min (the base could be made of bakelite or hard rubber)
تحليل مقاس جسيمات التربة
S155 KITthis kit is used to determine the quantitative size distribution of very fine particles in soils such as clay and silt.
two models are available:
• complete set for Hydrometer method (ASTM, AASHTO, UNE)
• complete set for Pipette method (BS 1377:2)
مجموعة إختبار الميثيلين الأزرق
S157 KITEN 933-9
the set is used to determine the quantity of clay in fine portions of aggregates.
Matest also offers the automatic model (code S157-20) that grants accurate and repeatable test results, saving time (approx. 30 minutes for each test).
مجموعة إختبار المكافئ الرملي
S158-20 KITEN 933-8 / ASTM D2419
the complete set is used to calculate the percentage of fine elements (powder, clay, silt) into aggregates. Different models are available:
• complete set or simple set in accordance to EN, NF, CNR, UNI and Une Standards
• complete set or basic set in accordance to ASTM and AASHTO Standards
أدوات الإختراقية والقص بطريقة فين الحقلية والجيبية
S050Penetrometers:
• lightweight dynamic model or DCP (dynamic cone penetrometer)
• dial pocket models, range 0-6 kgf/cm2 or 1-14 kgf/cm2
• pocket models, range 0-4,5 kgf/cm2 or 0-16 kgf/cm2
• geopocket dial penetrometer
• proving ring penetrometer
• Proctor penetrometer
Shear vanes:
• field inspection pocket vane tester
• pocket models, range 0-1 kg/cm2 or 0-2 kg/cm2
أداة قمع الكثافة الرملية
S234 KITthe apparatus determines the in-situ density of fine-grained com-pacted soil.
Different models are available, depending on cone diameter: 6,5’’, 12’’, 100 mm, 150 mm and 200 mm (in accordance to ASTM, aaSHto, Cnr, Une, nF and BS Standards).
air compressors for laboratory S351 / V206air/water interface pressure system S350andreasen pipette S144augers, hand operated and motorized S092 KIT / S097Balloon density apparatus S230 KIT / S237 Boxes for shear test S282Calibration process for transducers/load cells S337-51Calibration unit for dial gauges/extensometers S390CBr machine, hand operated, field model S210 KITCBr moulds and equipments S200-01Classification test for constituents of coarse recycled aggregate S156-20Colour standard chart for organic impurities in soils S132Consolidation cells S268Consolidation frame for oedometer S290Consolidation frame for triaxial test S359Conversion frame for CBr S221De-airing tank for triaxial test S355Die cutting soil sampler S118Differential mercury manometer, triaxial S356Displacement transducers for geotechnical tests S336-11Double burette volume change apparatus S358Dynamic plate load test S229earth resistivity meter S077electric strain gauge load cells S337-31extruder for Marshall, CBr, Proctor moulds S114extruders for soil samples S111 / S114
Field CBr test set S220 KITGeogauge, non nuclear gauge S059Hollow punches and tampers S122Hollow punches and tampers for shear tests S122-08indicators, dial or digital S375ion exchange device S140Linear shrinkage BS S176Load proving rings S370-01 S370-01SMackintosh prospecting kit S051-01Moisture condition value determination S088-10Moulds for soil/cement S195-01nuclear moisture density gauge S060 / S060-01null indicator, triaxial S353organic matter test set S138Penetrometers for soil S165 KIT S166 KITPermeability attachment for oedometers S275Permeameter for soils S252Permeameter stand for soil S248Pinhole test equipment S244Pressure measuring devices for triaxial test S340Pressure transducers for geotechnical tests S336-50Proctor moulds and tampers S185 / S187Pyknometer for soils S147Samplers, surface soil S053 / S084 KITSand absorption cone and tamper S148Scraper for soil S240-01Screw pump for triaxial test S345
Seismograph S079Slotted weights for oedometers and shear test S273 KITSoftware for CBr test S218 / S218NSoftware for plate bearing test S224-21Software for tensile test on mortar briquettes S205-08Software for unconfined test on soil S218-01 S218-01NSoftware lab oedometer S262-12Software lab shear test S277-41Software lab triaxial test S335-11Software report for direct/residual shear test S277-40Software report for triaxial test S335-10Software report oedometer S260-05Soil colour chart S133NSoil lathe S120Stirrer, high speed S156-01 KITSubmersible load cells S337-02triaxial cells S305trimming knife S125vibrating compaction hammer S197vibrating table for relative density of cohesionless soils S238 KITvolume gauge for triaxial test S338Water level indicators S061Water, hardness test kit S137Water, kit for acidity, chloride and hardness test S135Water/pressure distribution unit for triaxial test S348Wire saw S124
منتجات أخرى
تــــــربة
38 39
أجهزة إختبار المواد
أجهزة عامة
موازينmechanical models, rotary automatic scales, batching scales, moisture determination balances, zero-centering balances, and digital models (from 210 g to 300 kg).
Most of the models are fitted with under balance weighting facility for specific gravity tests and rS 232 port.
زجاجيات مخبرية• measuring cylinders and beakers
• Erlenmeyer conical flasks, volumetric flasks with and without stopper, filter flasks
• graduated bottles
• pyknometers, Gay-Lussac and Hubbard-Carmick specific gravity bottles
• weighting bottles, glass funnels, graduated pipettes, bended or right graduated burettes, desiccators
موازين حرارة• dial• with glass stem• armoured• digital• with microprocessor• infraredمنتجات بلاستيكية
• graduated decanters
• beakers
• wash bottles
• bottles
• funnels
• boxes and sample bags
منتجات بورسالينية • mortars with pestle
• evaporating dishes
• crucibles
• Buchner funnel
منتجات وحاويات معدنية • mixing bowls
• tins
• sample containers with air tight lid
• pans
• round and flat scoops made of aluminium or steel
• flexible and rigid spatulas
منتجات أخرى
aspirator pump V202
Balances, electronic and analytical V065-02
Bristles V179
Brushes V178
Bucket, made of plastic V128
Burner, Bunsen V173 KIT
Burner, butane V201-01
Chattaway spatula V192-08
Chemicals V300-05
Conductivity meter, thermometer V166-01
Crucible, made of platinum V117-04
Density baskets for specific gravity frame V041
Density chisel V198
Dropping bottle V124
Filter paper Whatman V218-01
Funnels, made of plastic V135
Gloves V177
Hair hygrometer V169
Hammer, made of steel V193
Hand anemometer cup V148-01
Hydrometers for soil V172
Ladle V186-01
Mallet, made of rubber V195
Mallet, made of steel V194
Marking pencils for glass V147-01
Metal stands V219
Mortar and pestle, made of stainless steel V112-05
Pestle, rubber heated V113
Petri dish V123
PH meter V215
Pick mattock, density pick V197
Pipettes of Mohr V142
rain gauge V167
rule, folding V176
rule, made of stainless steel V176-01
Sand bath V241
Screw clamps, Hoffman and Mohr V220 V220-01
Shovel V196
Sleeves V220-02
Specific gravity frame V085
Spoon for sampling V186
Stop watch V170
thermohygrograph V168
thermo-hygrometer V165
timing device V171
tongs for crucible V174
tool kit V222
trolley for laboratory V224
trowels V187
tubes, made of rubber V230
vacuum pumps V203
vernier caliper V175
voltage stabilizer V208-10
Watch glass V115
Water stills V211
Weather station V148
Weights for balances V036
Wheelbarrow V226
Wire gauze with ceramic centre V173-03
40
LAT No 214
Signatory of EA, IAF and ILAC Mutual Recognition Agreement
The content of this brochure refers to products/activities not accredited by ACCREDIA
MATEST S.p.A. UnipersonaleVia delle Industrie, 2524048 Treviolo (Bg) • ItalyT. +39 035 2055011 • F. +39 035 [email protected] - www.matest.com