… from thoughts to innovations Czech Technology Days at GT, Atlanta, Georgia, USA, May 29-30,...
-
Upload
gillian-harvey -
Category
Documents
-
view
218 -
download
1
Transcript of … from thoughts to innovations Czech Technology Days at GT, Atlanta, Georgia, USA, May 29-30,...
… from thoughts to innovations
Czech Technology Days at GT, Atlanta, Georgia, USA, May 29-30, 2014
TA CR and Support of R&D in Czech Republic
Czech Technology Days at Georgia Institute of Technology
Atlanta, Georgia, USA, May 29-30, 2014
Management of R&D System in the CR
Czech Technology Days at GT, Atlanta, Georgia, USA, May 29-30, 2014
TA CRthe objectives
• Organizational unit of the state and an administrator of a state budget chapter with the effect from 1st July 2009
• Is based on the amendment to the Act No. 130/2002 Coll. (Act on support of R&D)
• Is a tool for the implementation of a reform of R&D– To reduce a number of state budget chapters– To simplify the administration of the R&D– To support the AR, ED and innovation in the CR – To support the cooperation and communication between
research organizations and the private sector– To contribute to increasing the competitiveness and the
economic growth of the CR
Czech Technology Days at GT, Atlanta, Georgia, USA, May 29-30, 2014
TA CR ongoing programmes
supporting R&D in chemistry
ALPHA - Searching for “smart solutions“ in areas of progressive technologies, sustainable transportation and protection of the environment;
Competence Centers – large collaborative projects where research organizations are working together with companies on a dedicated research agenda
EPSILON – replaces programme ALPHA and the field of chemistry is also supported, 1st call in May 2014
Czech Technology Days at GT, Atlanta, Georgia, USA, May 29-30, 2014
TA CR programme DELTA
DELTA – programme for the support of international R&D projects of Czech enterprises and research organizations with their partners outside of the EU
- Prerequisite to have a partner agency in the respective country - -> TA CR has good relations to NSF
- -> Czech-USA R&D projects can be supported through the DELTA programme - 1st call - June 9-th 2014
Czech Technology Days at GT, Atlanta, Georgia, USA, May 29-30, 2014
TA CR ongoing programmes – overall
targeted support for 2014
ALPHA 1 850 000 000 CZK 74 000 000 EUR
BETA 80 000 000 CZK 3 200 000 EUR
OMEGA 51 500 000 CZK 2 060 000 EUR
Competence Centres 812 414 000 CZK 32 496 560 EUR
GAMA 44 500 000 CZK 1 780 000 EUR
DELTA 26 000 000 CZK 1 040 000 EUR
OVERALL 2 864 414 000 CZK 114 576 560 EUR
Czech Technology Days at GT, Atlanta, Georgia, USA, May 29-30, 2014
TA CR ongoing programmes – overall
targeted support for 2014
ALFA
BETA
OMEGA
Competence Centres
GAMA
DELTA
Czech Technology Days at GT, Atlanta, Georgia, USA, May 29-30, 2014
R&D infrastructures in the CR
Support of mainly large R&D centres:
– European centres of excellence (6 CoE – from EU & national funds, OP RDI)• BIOCEV, CEITEC, ELI, ICRC, IT4I, SUSEN
– Regional R&D centres (40 – from EU & national funds, OP RDI)
– Competence centres TA CR • 22 from the 1st call, 2012• 11 from the second call, 2014
Czech Technology Days at GT, Atlanta, Georgia, USA, May 29-30, 2014
R&D&I Infrastructures(OP RDI & TA CR CC)
Czech Technology Days at GT, Atlanta, Georgia, USA, May 29-30, 2014
R&D&I Infrastructures(OP RDI & TA CR CC)
according to fields - volume of funding
Czech Technology Days at GT, Atlanta, Georgia, USA, May 29-30, 2014
Project example 1 - CCFlexible printed microelectronics based on organic or hybrid materials • The project aim is the design of imprinted functional electronic
systems on flexible substrates and their application by hybrid printing techniques.
• Partnership: Centrum organické chemie, UP– Pardubice, ZČU - Plzeň, & 4 other Companies
• Duration: 2012 – 2019• Total Expenditure: 167 200 000 CZK (incl. National Support: 117 000 000
CZK)• Short Introduction: The research and application centre is aimed at
research of materials and hybrid technologies for functional printed electronic systems on flexible substrates based on the combination of metallic nanoimprinted nanostructures and functional electronic and sensory elements by rotary printing methods. Applications will be aimed at a low-cost printed flexible electronics particularly for smart packaging, smart textiles and holographic safety elements.
Czech Technology Days at GT, Atlanta, Georgia, USA, May 29-30, 2014
Project example 2 - CC
Biorefinery Research Centre of Competence • Create an interdisciplinary center with high innovation potential for
sustainable utilization of renewable sources, and bring the Czech Republic to the leading position in next generation biorefinery
• Partnership: Ústav chemických procesů AV ČR, VŠCHT - Praha, & 5 other Companies
• Duration: 2012 - 2019• Total Expenditure: 335 900 000 CZK (incl. National Support: 233 320 000
CZK)• Short Introduction: The project addresses the problem of biomass utilization
employing the techniques of green chemistry to the high added-value products and energy sources. From the biomass of microbial, plant or animal origin one can by refining obtain food supplements, fodder and fertilizers, biofuel of new generation and energy. Biorefining is a unique way of new sustainable solution of substitution of fossil fuels minimizing adverse effect on the environment while making use of the whole volume of biomass.
Czech Technology Days at GT, Atlanta, Georgia, USA, May 29-30, 2014
DELTA– basic information
• “Programme for the support of AR and ED through joint projects of technology and innovation agencies“
• Support of joint projects of enterprises and ROs supported by TA CR and leading foreign technology and innovation (or similar) agencies with which, by the time of the call for proposals, TA CR has/will have initiated a cooperation
• cooperation with NSF and next institutions
Czech Technology Days at GT, Atlanta, Georgia, USA, May 29-30, 2014
DELTA- basic information II
• Programme is not thematically focused; • Topics of joint projects will be set ad hoc
– Areas, in which projects will be accepted, may differ not only per each partner agency, but also per each call for proposals;
• The aim of the programme is:– To increase number of real R&D outputs in areas for which
there is a consent of both TA CR and foreign partner, – which will be successfully embodied in the practice and
thus will contribute to the competitiveness of the Czech Republic – doing this by supporting bilateral or multilateral cooperation.
Czech Technology Days at GT, Atlanta, Georgia, USA, May 29-30, 2014
DELTA– basic information III
• Programme duration is 6 years - 2014 to 2019,• Call for proposals:
– Max. 4 times per year (1st in 2014, then in 2015 and 2016, in case there would be enough resources, also in 2017);
– Published for projects solved in cooperation with one or more partner agencies;
• Project duration max. 3 years;• Maximum support for Czech participants 25 million
CZK per project;• Non-European states are the priority.• Supposed number of supported projects yearly – 10
projects!
Czech Technology Days at GT, Atlanta, Georgia, USA, May 29-30, 2014
DELTA- basic characteristics
• Not a classic program - requires:– Active creation of conditions for a successful
implementation of the programme – maximal facilitation of a match-making of Czech and foreign institutions, otherwise there will not be enough projects applying.
– As flexible conditions as possible.• Need for securing a service for a IPR protection – TA
CR will be an active partner for the beneficiaries.
Czech Technology Days at GT, Atlanta, Georgia, USA, May 29-30, 2014
DELTA- overall expenditures
Czech Technology Days at GT, Atlanta, Georgia, USA, May 29-30, 2014
Financing by TA CR
Financing by foreign agency
ProposalDecision
TA CRTA CRCzech
company/research org.
Foreigncompany/
research org.
ForeignagencyForeignagency
Decision
Proposal
Agreement& work plan
JointProjectJoint
ProjectJointEvaluation
JointEvaluation
Pro
mo
tio
n &
Net
wo
rkin
g a
ctiv
itie
s
DELTA- financing scheme
Czech Technology Days at GT, Atlanta, Georgia, USA, May 29-30, 2014
DELTA- evaluation criteria
Czech Technology Days at GT, Atlanta, Georgia, USA, May 29-30, 2014
DELTA – criteria for fulfilling the objectives
Czech Technology Days at GT, Atlanta, Georgia, USA, May 29-30, 2014
… from thoughts to innovations
Thank you for your attention
Czech Technology Days at GT, Atlanta, Georgia, USA
May 29-30, 2014
http://www.tacr.cz/index.php