計算流體力學 - TARI · 2021. 4. 29. · 計算流體力學的基礎是整合流體動 力方程(包括質量、動量與能量守恆定 一、前言 全球氣候變遷造成氣候系統的混
流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)
description
Transcript of 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)
![Page 1: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/1.jpg)
1
流體力學 (Fluid Mechanics)(Spring 2009)
教科書 (Text Book)
Munson, B. R., Young, D. F., and Okiishi, T. H., Fundamentals of Fluid Mechanics, 5th edition, John Wiley & Sons (Asia) Pte Ltd, 2006.
Pte Ltd = Private Limited
![Page 2: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/2.jpg)
Chapter 1
Basic Properties of Fluids
2
![Page 3: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/3.jpg)
3
Chapter 1 Basic Properties of Fluids
Fluid mechanics( 流体力學 ) 是什麼 ?
-屬於 applied mechanics( 應用力學 ) 之領域 -研究氣体及液体在靜止及運動之行為 (Behavior). -所研究的流體種類包括,由血液至原油,其所流經 的管徑大小,由幾個 microns(10-6m) 至 4 ft 直徑之油 管 (800 miles長 ) 。 -研究問題範圍 為何飛機的表面需要平滑 ? 而高爾夫球的表面須要粗糙 ( 或 dimpled) 以增加其飛行效率 ?
![Page 4: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/4.jpg)
4
有些很有趣的問題可以利用很簡單流體力學之觀念去回答,例如:
-火箭為何能在外太空中沒有空氣裡可以飛行?-何以超音速飛機,經過你之後才聽到聲音?-何以在河床平坦之處的流水仍然流動很大?-水龍頭流出之水,何以有時候平滑,有時候為不平滑 之流動?-何以能夠利用飛機模型去研究飛機建造之設計?-何以流線型的汽車或卡車設計,能夠增加汽油使用的 里程數?
流體力學是一門非常重要而實際的課題。
![Page 5: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/5.jpg)
5
§1.1 Some characteristics of fluids
- What is a fluid?
- What is the difference between a solid and a fluid?
![Page 6: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/6.jpg)
6
What is the difference between a solid and a fluid?
Ans: Descriptive answer: Solid - "hard" ; not easily deformed Fluid - "soft" ; easily deformed
From molecular structure of materials: Solid - densely spaced molecules with large intermolecular cohesive forces to maintain its shape, and to not be easily deformed.
Fluid - the molecular are spaced further apart, the intermolecular forces are smaller than for solid, and the molecules have more freedom of movement.
![Page 7: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/7.jpg)
7
流體 (Fluid) 包括液体 (Liquid) 及氣體 (Gases) ,其區別如下:
Liquids - easily deformed, not easily compressed, - free surface.
Gases - greater molecular spacing and freedom of motion with negligible cohesive intermolecular forces. - no free surface
![Page 8: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/8.jpg)
8
Definition of fluid and how fluids deform :
A fluid is defined as a substance that deforms continuously flow when acted on by a shearingstress of any magnitude.
A shearing stress (F/A) is created whenever a tangential force acts on a surface.
When common solids such as steel or other metals are acted on by a shearing stress, they will initially deform (usually a very small deformation),but they will not continuously deform(flow).
What is a fluid?
![Page 9: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/9.jpg)
9
Rheology:
Some materials, such as slurries, tar, putty, toothpaste, and so on, are not easily classified since they will behave as a solid if the applied shearing stress is small.
But if the stress exceeds some critical value, the substance will flow. The study of such material flow is called rheology.
![Page 10: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/10.jpg)
10
Fluid continuum
Although the molecular structure of fluids is important in distinguishing one fluid from another, it is not possible to study the behavior of individual molecules when trying to describe the behavior of fluid at rest or in motion.
Rather, we characterize the behavior by considering the average, or macroscopic, value of the quantity of interest, where the average is evaluated over a small volume containing a large number of molecules.
The spacing for gases at normal P&T is on the order of 10-6 mmThe spacing for liquid at normal P&T is on the order of 10-7 mmThe number of molecules/mm3 is on the order of 1018 for gases. 1021 for liquids.
![Page 11: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/11.jpg)
11
![Page 12: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/12.jpg)
12
Thus, we assume that all the fluid characteristics we are interested in (pressure, velocity, etc) vary continuously throughout the fluid - that is, we treat the fluid as a continuum.
One area of fluid mechanics, for which the continuum concept breaks down, is in the study of rarefied gases such as would be encountered at very high altitudes.
Spacing between air molecules can become large
The continuum concept is no longer acceptable
![Page 13: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/13.jpg)
13
§1.2 Dimensions, Dimensional Homogeneity, and Units
It is necessary to develop a system for describing fluid characteristics both qualitatively and quantitatively.
The qualitative aspect serves to identify the nature, or type of the characteristics -- such as length, time, stress, and velocity.
The quantitative aspect provides a numerical measure of the characteristics. The quantitative description required both a standard (or a unit) and a number.
A standard (or unit) for a length might be a meter or foot for time might be an hour or second for mass might be a slug or kilogram
![Page 14: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/14.jpg)
14
Basic dimensions (or primary quantity):
The qualitative description is conveniently given in terms of certain primary quantities, such as
Length (L), Time (T), Mass (M), and Temperature(θ) MLT θ systemor Length (L), Time (T), Force (F), and Temperature(θ) FLT θ systemor Length (L), Time (T), Mass (M), Force (F), and Temperature(θ) FMLT θ system
![Page 15: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/15.jpg)
15
Secondary dimensions(or secondary quantity):
Secondary quantities are based on primary quantities (or basic dimensions) , such as area [=] L2, velocity [=] LT-1, density [=] ML-3 and so on v ≐ LT-1 or v[=]LT-1
"The dimensions of a velocity equal length divided by time"
![Page 16: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/16.jpg)
16
Secondary quantities
v (velocity) = L/T LT≐ -1
(stress) = F/A [=] FL-2 or (stress) = F/A [=] ML-1T-2
Table 1.1 (p.4)
a list ofdimensions
![Page 17: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/17.jpg)
17
Table 1.1 (p. 4)Dimensions Associated with Common Physical Quantities (continued on next slide)
![Page 18: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/18.jpg)
18
Table 1.1 (p. 4)continued
![Page 19: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/19.jpg)
19
Dimensional Homogeneity:
All theoretically derived equations are dimensionally homogeneous.
Dimensional homogeneity unit [=] unit
Same
unit [=] unit + unit
Same Same
![Page 20: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/20.jpg)
20
For example:
v = v0 + at -----(1.1) dimensional homogeneity LT-1 [=] LT-1 + LT-2 T LT-1 [=] LT-1 + LT-1
d = ------(1.2) dimensional homogeneity where g = 32.2 ft/s2
d = 16.1 t2 ------------------(1.3) 16.1 is a constant with dimensions of LT-2
Eq(1.1) & Eq(1.1) are general homogeneous equation Eq(1.3) is restricted homogeneous equation
Dimensional analysis (in Chapter 7)
2
gt 2
![Page 21: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/21.jpg)
21
Example 1.1 Investigate the dimensional homogeneity of the following formula:
Q = 0.61A
Solution:
On next page
gh2
![Page 22: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/22.jpg)
22
Q = 0.61A
Left Side [=] L3T-1
Right Side [=] 0.61(L2)
Right Side [=] Left Side = pure constant
Thus Q = 0.61A is a general dimensional homogeneity
(valid for any constant system of units)
)L)(LT(2 2
2/12/122 )()(261.0][ LLTL 13261.0][ TL
261.0
gh2
gh2 Q = volume rate of flow(volume/time) [=] L3T-1
A = area [=] L2 g = acceleration of gravity [=] LT-2
h = height [=] L
![Page 23: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/23.jpg)
23
Alternately, Q = 0.61A = 0.61A where g = 32.2 ft/s2
Q = 4.90A
Left Side [=] L3T-1
Right Side [=] 4.90L2L1/2
[=] 4.90L5/2
for left side = right side L3T-1 [=] 4.90L5/2
4.90 [=] L3T-1L-5/2 [=] L1/2T-1
it is not a constant, instead it has a dimension of L1/2T-1
(or ft1/2/s)
Thus Q = 4.9A is a restricted homogeneous equation (valid for a specific system of units)
gh2h2.322
h
h
![Page 24: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/24.jpg)
24
§1.2.1 System of Units
For example, if we measure the width of a black board and say 10 units wide --------no meaning 10 meters wide ------meaningful “meter”--- standard length
A unit must be established for each of the remaining basic quantities( length, force, mass, time, and temperature).There are several systems of units in use and we shall consider three systems that are commonly used in engineering.
British Gravitational (BG) system International System (SI) English Engineering (EE) System
![Page 25: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/25.jpg)
25
*British Gravitational (BG) System -- BG units (FLT )
Basic Length (L) --- foot (ft)Dimensions Time (T) --- second (s) Force (F) --- pound (lbf or lb) Mass (M) --- slug (slug) Mass is defined from Newton's Second law
force = mass * acceleration or 1 lbf = 1 slug * 1 ft/s2 or 1 slug = 1 lbf / 1 ft/s2
Temperature() ---- Fahrenheit(0F) or Rankine(0R) 0R = 0F + 459.67
![Page 26: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/26.jpg)
26
*International System (SI) ---- SI units (MLT )
In 1960 the Eleventh General Conference on Weights and Measures, the international organization responsible for maintaining precise uniform standards of measurements, formally adopted the international system of Units as the international standard
Length (L) ---- meter(m) Time (T) ----- second (s) Mass (M) ---- kilogram (kg)
Temperature() ----- kelvin (k) ºk wrong k = 0C+273.15
![Page 27: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/27.jpg)
27
Force(F) ------ newton (N) F = m a 1 N = (1kg) (1m/s2)
weight W = m g W(N) = m(kg) g(m/s2) where g = 9.807 m/s2 = 9.81m/s2
work W = F S W(Joule, J) = F(N) S(m)
power P = F V P(watt) = F(N) V(m/s)
![Page 28: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/28.jpg)
28
*English Engineering (EE) System --- EE Units (FMLT )
Length(L) --- foot(ft)Time(T) --- second(s)Mass(M) --- pound mass(lbm)Temperature(θ) --- degree Rankine(0R)Force(F) --- pound(lbf)
Newton's Second law
weight W=mg/gc )//(
)/()()(
2
2
fmc
mf lbsftlbg
sftglbmlbW
cg
amF
)lb/s/ftlb(g
)s/ft(a)lb(m)lb(F
f2
mc
2m
f
where gc=32.174 lbm ft / s2 / lbf
![Page 29: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/29.jpg)
29
Compare
In BG unit In EE unit
1slug=32.174 lbm
Units in this textbook
BG Units ***Using a consistant system of units SI Units throughout a given solution.EE Units ---sparingly *Conversion tables: Table 1.3;1.4; 1.5~1.8 (inside of back & front covers)
)s/ft(a)slug(m)lb(F 2f
)lb/s/ftlb(174.32
)s/ft(a)lb(m)lb(F
f2
m
2m
f
amF
![Page 30: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/30.jpg)
30
System of Units BG(FLT )
SI(MLT )
EE(FMLT )
British Gravitational
System
International System
English Engineering
System
Length(L) ft(foot) m(meter) ft(foot)
Time(T) S(second) S(second) S(second)
Mass(M) slug(slug) kg(kilogram) lbm(pound mass)
Temperature() Raukine(0R)0R=0F+459.67
Kelvin(k)k=0c+273.15
Raukine(0R) or Fahrenhert(0F)
Lbf (Pound force)Force Lbf (Pound force) N (Newton)
![Page 31: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/31.jpg)
31
cg
amF
f
2m
c lb
s/ftlb174.32g
fkgForce ][
c
2
f g
s/m8.9kg][kg
f
2
c kg
s/kgm8.9g
1lbf=1slug1ft/s2
1slug = 1 ft/s2 / 1 lbf
1Newton=1kg1m/s2
gc=1 gc=1
cg
amF
cg
amF
BG(FLT )
SI(MLT )
EE(FMLT )
![Page 32: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/32.jpg)
1 pound-force = 0.453 kilogram-force
1 pound-force = 4.448 newton
1 newton = 0.224 pound-force
1 newton = 0.101 kilogram-force
32
![Page 33: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/33.jpg)
33
Example 1.2
Given:
tank Ff=?
kgmoH
362
2s/ft7a
w
![Page 34: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/34.jpg)
34
Solution: Newton's second law of motion to the water body
amF
mawFf
mamgFf
Nlb
Nlb
lb
lblb
sftkg
slugkgsft
kg
slugkg
mamgF
ff
f
ff
f
4301
448.472.96
72.96
27.1745.79
/759.14
136/2.32
59.14
136 22
table 1.3
table 1.3
![Page 35: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/35.jpg)
35
Table 1.3 (back cover)Conversion Factors from BG and EE Units to SI Units
![Page 36: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/36.jpg)
36
Table 1.4 (back cover)Prefixes for SI Units
![Page 37: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/37.jpg)
37
§1.3 Analysis of Fluid Behavior
Fundamental laws involved in the study of fluid mechanics(same as you have encountered in physics and other mechanics courses)
---Newton's laws of motion (the 1st, 2nd, and 3rd laws)
---Conservation of mass
---the first and second laws of thermodynamics
![Page 38: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/38.jpg)
38
Fluid statics ------- the fluid is at restFluid mechanics Fluid dynamics --- the fluid is moving
Fluid properties Fluid behavior
For example
Compressible fluid Incompressible fluid
Viscous fluid Inviscous fluid
![Page 39: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/39.jpg)
39
Fluid properties:
Heaviness –density() –specific weight( γ ) –specific gravity(SG)
Fluidity –viscosity
Compressibility Vapor pressure Surface tension
![Page 40: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/40.jpg)
40
§1.4 Measures of Fluid Mass and Weight
§1.4.1 Density()
= m/v [=] slug/ft3 ( in BG units ) [=] kg/m3 ( in SI units )
= f ( different fluids ) Table 1.5 & 1.6 Δ liquid = f (Δ Pressure, Δ temp. ) = small Table B.1 p. 761
![Page 41: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/41.jpg)
41
= 1.94 slug/ft3
= 999.9 kg/m3
( or 1000 kg/m3 ) Table B.1 & B.2 p. 761
This property is not commonly
The specific volume, υ = 1/ used in fluid mechanics but
is used in thermodynamics.
oH2
gas
at 600F
![Page 42: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/42.jpg)
42
§1.4.2 Specific weight (γ )
γ = weight/volume = mg/ = g
γ = g [=] lbf/ft3 in BG Units Table 1.5 [=] N/m3 in SI Units 1.6
§1.4.3 Specific Gravity ( SG )
SG = at some specified temperature
SG = independent of the system of units used
C4at OH2
WaterofDensity
fluid theofDensity
![Page 43: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/43.jpg)
43
§1.5 Ideal Gas Law
Ideal (or perfect) gas law, or Equation of state
p = RT ------------------------ (1.8)
where P = absolute pressure = Normal force on a plan surface/area [=] lbf/ft2 abs ( psfa ) or lbf/in2 abs( psia ) in BG Units [=] N/m2 ( Pascal, Pa ) in SI Units
absolute pressure --- relative to absolute 0 pressure gauge pressure --- relative to the local atmospheric pressure
absolute pressure (psia) = gauge pressure (psig) + local atmospheric pressure
![Page 44: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/44.jpg)
44
Standard Sea – level atmospheric pressure = 14.696 psia or 101.33 kpa ( abs. ) or 14.7 psia or 101 kpa ( abs. )
= density T = absolute temperature R = gas constant in BG Units R [=] in SI Units R[=] table 1.7 & 1.8 (front page)
)Rslug/(lbft 0f
)kkg/(J
![Page 45: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/45.jpg)
45
![Page 46: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/46.jpg)
46
![Page 47: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/47.jpg)
47
Table 1.7 (front cover)Approximate Physical Properties of Some Common Gases at Standard Atmospheric Pressure (BG Units)
![Page 48: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/48.jpg)
48
Table 1.8 (front cover)Approximate Physical Properties of Some Common Gases at Standard Atmospheric Pressure (SI Units)
![Page 49: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/49.jpg)
49
Example 1.3 Given: Compressed air tank = 0.84 ft3 ; p = 50 psig, T = 700F, Patm = 14.7 psia Question: = ? w = ?
Solution: = p/RT
R = 1716 ft-lb/slug0R T = 700F = 70+459.6 = 529.60R
3ftslug/ 0.01025
6.5291716
8.9316
psia7.64psi7.14psi50psig50p
flb 0.277
84.02.3201025.0
gw
2f2
2
2f ft/lb8.9316
ft1
in144
in
lb7.64
![Page 50: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/50.jpg)
50
Table 1.3 (back cover)Conversion Factors from BG and EE Units to SI Units
![Page 51: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/51.jpg)
51
Table 1.4 (back cover)Prefixes for SI Units
![Page 52: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/52.jpg)
52
§1.6 Viscosity
Density Specific weight Viscosity ------ "fluidity" of a fluid
measures of the "heaviness" of a fluid
free to move
P(force)
Fixed plateShearing strain
p
shearing stressδA
B B'
A
δa
![Page 53: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/53.jpg)
53
Figure 1.2 (p. 13)(a) Deformation of material placed between two parallel plates. (b) Forces acting on upper plate.
![Page 54: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/54.jpg)
54
Figure 1.3 (p. 14)Behavior of a fluid placed between two parallel plates.
![Page 55: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/55.jpg)
55
Velocity=Ua
P (force)
yu B B'
A water
Fixed plate
no slip condition
u = u(y) For t 0 0
ABB' tan = Since a = Ut
= Rate of shearing strain =
b
Uyu
Velocitygradient
b
U
dy
du
b
a
b
U
t
b
tU
![Page 56: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/56.jpg)
56
b
U
tlim
0δt
dy
du
b
U
From experiment p α τ & τ α
or τ α
dy
du
dy
du
Shearingstress
Rate of shearing strainor velocity gradient
For common fluids, such as water, oil, gasoline, and air.
τ = ----------------(1.9)where μ = absolute viscosity. or dynamic viscosity or viscosity
dy
du
![Page 57: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/57.jpg)
57
τ =
τ vs. linear (Newtonian fluids) slope = viscosity, μ μ = constant
Newtonia fluid
dy
du
dy
du
![Page 58: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/58.jpg)
58
Non-Newtonian Fluids
τ vs. μ ≠ constant non-linear non-newtonian fluids slope = apparent viscosity, μ ap
Non-Newtonian Fluids Bingham plastic fluid --- Toothpaste, mayonnaise Shear thinning fluid --- latex paint Newtonian fluid ---water, oil, air Shear thickening ---
water - corn starch mixture water - sand mixture (quick sand)
Shearing
Stress, τ
Bingham Plastic
Shear thinning
Newtonian
Shear thickeing1
μ ap
Rate of shearing strain, dy
du
dy
du
![Page 59: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/59.jpg)
59
Figure 1.5 (p. 16)Variation of shearing stress with rate of shearing strain for several types of fluids, including common non-Newtonian fluids.
![Page 60: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/60.jpg)
60
Dimensions of Viscosity τ = μ = τ [=] μ [=] FTL-2 [=] ML-1T-1
[=] lbf s / ft2 in BG units Table 1.7 (P.14) [=] N s / m2 in SI units Table 1.8 (P.14)
in CGS ( cm-gm-s) system
poise = dyne s / cm2
= g / (cm s)
1 cp = 10-2 poise = 0.001 kg/(m s) = 2.09 10-5 slug/(ft s)
dy
du
du
dy12 LT
L
L
F
![Page 61: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/61.jpg)
61
μ = absolute viscosity = Kinematic viscosity or dynamic viscosity [=] L2/T or viscosity [=] ft2/s BG units [=] FT/L2 Table 1.5-1.8 [=] m2/s SI units (inside of front cover) Table 1.5-1.8 [=] lbf s/ft2 BG units [=] N s/m2 SI units [=] dyne s/cm2 CGS units [=] cm2/s CGS units (poise) ( stoke, st )
ρ
μν
![Page 62: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/62.jpg)
62
![Page 63: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/63.jpg)
63
![Page 64: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/64.jpg)
64
![Page 65: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/65.jpg)
65
![Page 66: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/66.jpg)
66
![Page 67: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/67.jpg)
67
![Page 68: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/68.jpg)
68
elTf
smallpf
arg)(
)(
For liquids, μ dec. as T inc. For gases, μ inc. as T inc.
For liquid, T inc. Cohesive forces are reduced μ dec.For gas, T inc. Exchange of momentum of gas molecules between adjacent layers μ inc
Empirical Correlations. (μ =f(T) )----- for gases, the Sutherland equation -----------(1.10) C & S are constants T = absolute temperature----- for liquid, Andrade's equation ------------(1.11) D & B are constants
T is absolute temperature
Because of molecular structure
ST
CT 2/3
TBDe /
![Page 69: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/69.jpg)
69
Figure 1.6 (p. 17)Dynamic (absolute) viscosity of some common fluids as a function of temperature.
![Page 70: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/70.jpg)
70
Example 1.4 Given: Reynolds number (Re) =
μ = 0.38 N s/m2 = 0.38 kg/(m s) S.G. = 0.91 (specific gravity) D = 25 mm diameter pipe v = 2.6 m/s
Determine: Re = ? in (a). SI units (b). BG units
μ
ρνD
= fluid densityv = mean fluid velocityD = pipe diameterμ = viscosity
![Page 71: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/71.jpg)
71
Solution: SG = = 0.91 × 1000 kg/m3 = 910 kg/m3
(a). In SI units Re =
=
(b). In BG units Re =
= =156
OH2
C4at OH 02
SG
2
33
m/SN38.0mm10
m1)mm(25)s/m(6.2)m/kg(910
D
156S/mkg1
N1
NS
mkg
1562
2
2
2f
22
3-3
33
3
m/SN1
ft/Slb10089.2S/m0.38N
1m
3.281ftm1025
1m/s
3.281ft/s2.6(m/s)
1kg/mft
slug101.94
)910(kg/mD
2f
f2
S/ftslug1
lb1lb/)S/ftslug(156
μ = 0.38 N s/m2 = 0.38 kg/(m s)S.G. = 0.91 (specific gravity)D = 25 mm diameter pipev = 2.6 m/s
![Page 72: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/72.jpg)
72
Example 1.5 Given: u =
where v = 2 ft/s (mean velocity) = 0.04 lbf S/ft2
h = 0.2 in Determine (a) τ (Shearing stress) on the bottom wall (b) τ (Shearing stress) on mid-plane ( Plane parallel to the walls and passing through the centerline )
h
y
x
hu
])h
y(1[
2
v3 2
![Page 73: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/73.jpg)
73
Solution: τ = u =
(a) y =
(b) y = 0
dy
du
])h
y(1[
2
v3 2
2h
vy3]
h
1
h
y2[
2
v3
dy
du
)/1(21600)
12
12.0(
)()/(23
2sy
in
ftin
ftysft
ft01667.0in12
ft1in2.0
)flow ofdirection in (/4.14
)]/1()01667.0(21600)[/(04.0
2
2
ftlb
sftslbdy
du
f
fbottom
0)021600(dy
dumidplane
=
![Page 74: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/74.jpg)
74
§1.7 Compressibility of Fluids
§1.7.1 Bulk Modulus
How easily can the volume (and thus the density) of a given mass of the fluid be changed when there is a pressure?
How compressible is the fluid?
A property that is commonly used to characterize compressibility is the bulk modulus, Ev, defined as
------------------------------(1.12) " - " means p
/d
dpE v
↓↑
![Page 75: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/75.jpg)
75
m = ρ or = m/ρ ---------(1.13)
Ev = Bulk modulus or bulk modulus of elasticity [=] F/L2 [=] lbf/ft2 (psf) in BG units [=] N/m2 (pa) in SI units
Large values for Ev relatively incompressibleFor water (600F & atmosphere), dp = 3120 psi compress a unit volume of water 1% Ev = 3.12e5 incompressible
Compressibility (c) = 1/Ev [=] Small value c incompressibility
/)(
/1)/1(
/)/( 2 d
dp
d
dpd
dp
mmddp
Ev
2/
1
LF
![Page 76: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/76.jpg)
76
§1.7.2 Compression and Expansion of Gases
From the ideal or Perfect gas law (or the equation of state)
p =ρRT ---------------------------(1.8) ---------------------------(1.14) If T = const. (Isothermal process)
1. Cconst
p
(1.16)---------)/(/
1
1
1 ppd
dC
d
dpE
cv
RTp
![Page 77: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/77.jpg)
77
If the compression or expansion is frictionless and no heat is exchanged with the surroundings (isentropic process), then p / (k) = const.--------------------------------(1.15)
where k = Cp/Cv (Specific heat ratio) - tables 1.7 & 1.8 (p.14) R = Cp-Cv tables B.3 & B.4 (p.832 , 833) p = absolute pressure
-------------------(1.17)
For air k = 1.40 at P = 14.7 psia Ev = 20.6 psia (isentropic bulk modulus)For water
Ev = 312,000 psia
kp/d
dpE v
![Page 78: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/78.jpg)
78
Example 1.6A cubic foot of helium at an absolute pressure of 14.7 psi is compressed isentropically to 1/2 ft3. What is the final pressure?
Solution: Since k = 1.66 (p.16)
m = v P1 = Pf
psia=6,696 psfa
constk
p
k
p
k
p
f
f
1
1
k
f
fk
1
1
m
p
m
p
5.46)5.0
1(7.14pp 66.1
kf
k1
1f
kfk
1
![Page 79: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/79.jpg)
79
§1.7.3 Speed of Sound─ Disturbances introduced at some point in the fluid propagates at finite velocity consequence of the compressibility of fluids.For example
─Similarly
propagate fluid
acoustic velocity,
or speed of sound ,C
Flowing fluidShut down downstream suddenly disturbance propagates to upstream
Vibrates of loud speaker diaphragm
Localized disturbance
![Page 80: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/80.jpg)
80
)19.1....(..........E
C or
)18.1....(..........d
dpC
V
for fluid (gas and liquid)
Since the disturbance is small, there is negligible heat transfer and the process is assumed to be isentropicFor gases, EV = kp (eq 1.17)
RTP
)20.1.........(kRTC
kpC
For air at 60℉ k = 1.4 & R = 1716 (ft-lbf/slug.oR) C = 1117 ft/s (Appendix B
tables B.3 and B.4)For water at 20 ℃ Ev=2.19x109N/m2 & ρ=998.2kg/m3
and P=ρRT
for gas only
C = 1481 m/s (or 4860 ft/s)
![Page 81: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/81.jpg)
81
Example 1.7
A jet aircraft fly speed(v) = 550 mphat attitude(h)=35,000 ft, temperature (T)= -66 ,℉K = Cp/Cv = 1.40(assumed)
Determine: the ratio of the speed of the aircraft, V, to that of the speed of sound, C 。
![Page 82: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/82.jpg)
82
Solution: The speed of sound in air at h=35,000ft and T=-66 , ℉ k=1.40 C = = The aircraft speed is V =
Note: .Mach number = Ma = v/cIf Ma < 1.0 the aircraft is flying at subsonic speedIf Ma > 1.0 the aircraft is flying at supersonic speed
For compressible fluid flow withMa < 0.3 incompressible fluid
kRTsftRRsluglbfft /973)6.45966)(./.1716)(44.1(
sftmile
ft
s
hr
hr
Miles/807
1
5280
60
min1
min60
1550
8185.0/986
/807
sft
sft
C
V
![Page 83: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/83.jpg)
83
§1.8 Vapor pressureEvaporation ─ because some liquid molecules at the surface have sufficient momentum to overcome the intermolecular cohesive forces and escape into the atmosphere evaporation Liquid
Liquid Liquid Liquid
Vapor pressure = f (temperature) Appendix B (tables B.1&B.2) or tables 1.5 and 1.6
t = 0vaccum
t = t1 > 0molecules
t = t2 > t1
moleudes
pressure
equilibrium
Pressure exert on the liquid surface = vapor pressure
evaporation
Vapor is saturated
![Page 84: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/84.jpg)
84
Boiling ─ the formation of vapor bubbles within a fluid mass; it is initiated when the absolute pressure in the fluid reaches the vapor pressure, Water at atmospheric pressure = 14.7 psia Boiling point = 212 (100 )℉ ℃
vapor pressure( of water ) = 14.7 psia at 212℉ or boiling point = 212 ℉
at atmopheric presure=14.7
Important of vapor pressure ─ flowing fluid → fluid velocity↑→ pressure↓→ boling will occur→ Cavitation
`
![Page 85: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/85.jpg)
85
§1.9 Surface Tension
─At the interface between a liquid and a gas, or between two immiscible liquids, forces developed in the liquid surface which cause the surface to behave as if it were a "skin" or "membrane" stretched over the fluid mass.
Although such a skin is not actually present, this conceptual analogy allows us to explain several phenomena
Molecules along the surface are subjected to a net force toward the interior.
Steel needle floated because of surface tension (force)
HgCohesive forces in the surface
H2O
Waxed surfaceH2O
surface
![Page 86: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/86.jpg)
86
The apparent physical consequence of this unbalanced force along the surface is to create the hypothetical skin or membrane.
A tensile force may be considered to be acting in the plane
of the surface along any line in the surface.
The intensity of the molecular attraction per unit length
along any line in the surface is called surface tension(σ)
σ= f ( temperature)
[=] F/L
[=] lbf/ft BG unit tables 1.5& 1.6
[=] N/m SI unit Appendix B (table B.1 and B.2)
σ ↘ as T ↗
![Page 87: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/87.jpg)
87
2πRσ= PπR△ 2
where P = P△ i - Pe
Pi = internal pressure
Pe = external pressure
R
2P
one-half of a
liquid drop
R
2PPP 1
R
2PPP 2
R
4PPP 21
?21 PPP
airP1
Bubblefilm
Pe airP2
![Page 88: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/88.jpg)
88
The rise (or fall) of a liquid in a capillary tube --- having a liquid – gas – solid interface
g(πR2h) = 2πRσcos θ
)22.1(cos2
r
cos2
gRRh
where
θ= contact angle = f (liquid , surface)
γ = g
![Page 89: 流體力學 (Fluid Mechanics) (Spring 2009) 教科書 (Text Book)](https://reader037.fdocuments.net/reader037/viewer/2022102619/5681401e550346895dab785b/html5/thumbnails/89.jpg)
89
Example1.8
Solution:
σ= 0.0728 N/m for water at T = 20 ℃
ρg = 9.789 kN/m3 (table B.2 , P.857)
h < 1mm = 1X10-3m θ 0
gRh
cos2
Find R=?
For water T=20℃ & h<1mm
tube
33
101)(
cos2101
cos2
gRm
gR
m0148.01010789.9
10728.02R
33