Whiteman Osterman & Hanna Comments to PSC RE:PROPOSED DELIVERABILITY STUDY
Dave Sullivan – Team leader and Electrolosys expert Mike Whiteman – Teams analytical expert.
-
Upload
derrick-livings -
Category
Documents
-
view
217 -
download
2
Transcript of Dave Sullivan – Team leader and Electrolosys expert Mike Whiteman – Teams analytical expert.
Project: Hydrogen Hybrid Vehicle
#912
Dave Sullivan – Team leader and Electrolosys expert
Mike Whiteman – Teams analytical expert
Team Members
Adelio De Monte – Professor at Fleming College and is interested in the results and performance analysis of the system
DSE Automotive – Automotive company in Brampton owned by David Stirk which will be helping us with the automotive side of things and is interested in the end gains of the system.
Sponsors
In today’s world gas prices are rapidly sky rocketing from where they where 5 years ago. Our goal is to create a system that will convert water into hydrogen fuel using electrolysis to cut down the need of fuel by a considerable amount. This system will be able to be installed into any vehicle with an internal combustion engine or a diesel engine.
Mission Statement
Construction of electrolizer at DSE Automotive
Install electrolizer into the car as well as all other necessary devices such as bubblers and valves.
Create the PWM device for the power supply to the electrolyzer
Hand wind the toroid transformer coil to combine difference wave outputs.
Project Scope
Install dc to ac inverter to power the PWM Install Rectifier to convert the ac back to dc Tune the PWM to resonance frequency of
the cell. Create o2 sensor modifier which will allow
us to manually control the fuel/air ratio as lean as 18/1
Create the mass airflow sensor mod to allow us to match the tuned o2 sensor modification.
Project Scope
Create analog readout display of current fuel air mixture so we can visually see how lean we are running it.
Tune all sensors to the optimum efficiency according to how much hydrogen is being produced.
Gather statistics of sensor settings and performance statistics to do a performance analysis on it.
In the end we should have a very efficient vehicle
Project Scope
See Gantt Chart
Time Plan
Fleming College◦ Oscilloscopes, power supplies, multimetres, and
other miscellaneous electrical equipment to test our circuits to make sure they are functioning properly
◦ Computer to use lab view, avr studio and codevision to program our atmel microprocessor board
◦ Printer to print out any documentation or final presentation material
Resource Requirements and Budget
DSE Automotive◦ Routers, drills, Welders and other equipment for
construction and installation of our electrolysis device.
◦ Expert advise and automotive software to help us look up car electronic schematics and other things we may need.
◦ A warm place to install the electronics and other things into the vehicle during the middle of winter
Resource Requirements and Budget
Equipment and Items◦ Oscilloscopes, Power Supplies, Multimetres,
routers, soldering iron, welding machine, Obd2 to usb to notebook diagnostics.
◦ All the above items are supplied by either Sir Sandford Fleming College or DSE Automotive.
Resource Requirements and Budget
Parts and Supplies List◦ Water Level Sensing Circuit, PWM3G1 Circuit, 18/1
Fuel Enhancer circuit, bubbler, Analog Fuel/air Mixture display, DC to AC Inverter, Rectifier, toroid Transformer coil, Plexiglas and fittings, other miscellaneous stuff that may be needed
◦ The above items have an estimated value of 628$
Resource Requirements and Budget
Office Supplies◦ Computer with firefox◦ Windows XP◦ AVR Studios◦ Codevision◦ Labview◦ Paper to print on
Resource Requirements and Budget
Fabrication tools requirements◦ Router tool, drills, and other miscellaneous
equipment for our project will be provided by Sir Sandford Fleming or DSE Automotive.
Resource Requirements and Budget
Meetings every Monday at 11am in Noel Briones Office
Cell phones and land phones for audio messages and conversations
E-mail for communications Microsoft Groove may be setup for file
sharing and other materials Hydrogen-Hybrid.org will be setup for use
when needed
Communication Plan
Sponsor 1◦ Adelio Demonte ◦ 599 Brealey Drive◦ Peterborough, Ontario K9J 7B1◦ Canada◦ Email: [email protected]◦ Office 5916
Communication Plan
Sponsor 2◦ David Stirk◦ RR 2, Brampton, ON L6V 1A1◦ Canada◦ Email: [email protected]◦ Phone: 905-846-2682
Communication Plan
Team Leader◦ Dave Sullivan◦ 494 College Ave.◦ Orangeville, Ontario L9W 4R8◦ Canada◦ Email: [email protected]◦ Phone: 519-215-1127
Communication Plan
Team Member 2◦ Mike Wightman◦ 19 charlotte street ◦ Trenton, Ontario, k8v2c1◦ Canada◦ E-mail: [email protected]◦ phone: 705-772-2707
Communication Plan
In closing, we have a project ahead of us that will not only extend our knowledge in electrolysis and other aspects of this project, but we will be creating a brilliant device, that if done properly, should yield amazing results to help reduce fuel consumption in an everyday vehicle. This not only be an incredibly project for Fleming College but may produce an end product that could make major changes in the way vehicles operate today.
Closing