· Breathing System and Special Safety Application Air go compact scba ... wear with MSA...

Barricade Tape Barricade tape ............................................................................ 1099Breathing System and Special Safety Application Air go compact scba ................................................................ 1084 Air go pro ..................................................................................... 1084 Evolution thermal imaging camera ................................... 1084 Industrial scba complete set ................................................. 1084 Motion scout kt series ............................................................. 1084 Portable air filter and regulator ........................................... 1085 Portable breathing compressor .......................................... 1084 SCBA .............................................................................................. 1084 Transaire 5 and 10..................................................................... 1084Cone PVC traffic cone ......................................................................... 1099Convex Mirror Convex mirror ............................................................................ 1099Disposable Disposable ....................................................................1098 – 1099Eye Protection Eye protection ..............................................................1057 – 1061Face Protection Face protection ............................................................1066 – 1067Fall Protection Fall protection ..............................................................1077 – 1079Fan Fan ...................................................................................1107 – 1109Flashlight Flashlight .......................................................................1094 – 1095Foot Protection Foot protection............................................................1081 – 1082Gas Detector Fixed gas detector .................................................................... 1085Gas Detector Multi gas detector ......................................................1085 – 1086 Single gas detector .................................................................. 1085Glow in the Dark Exit Sign Big beam combination emergency lighting................... 1088 Big beam emergency lighting ............................................. 1088 Glow in the dark anti-skid tape .......................................... 1089 Glow in the dark door hadware markers ......................... 1089 Glow in the dark framed exit signs .................................... 1089 Glow in the dark high intensity hazard tape ................. 1089 Glow in the dark l-shaped stair markers .......................... 1089 Glow in the dark stripes and solid tape ........................... 1089 Glow in the dark exit and directional sign ....................... 1088 High intensity tape .................................................................. 1089Hand Protection Hand protection ..........................................................1068 – 1069Head Protection Head protection ..........................................................1064 – 1066Hearing Protection Hearing protection ....................................................1061 – 1063Insulating Equipment Insulating equipment ............................................................. 1083Lockout Tagout Lockout tagout ............................................................1090 – 1093Oil Absorbent Oil absorbent.............................................................................. 1072Pad Replacement pad...................................................................... 1109Protective Clothing Protective clothing ....................................................1073 – 1080Respiratory Protection Respiratory protection ..............................................1070 – 1072Safety Box Fire and media safe ....................................................1104 – 1106 Waterproof chest ...................................................................... 1104Safety Case Safety case .....................................................................1096 – 1098Safety Shower Safety shower ...............................................................1101 – 1102

19SAFETY AND PROTECTION EQUIPMENT19SAFETY AND PROTECTION EQUIPMENT

Sign and Label Maker Sign and label maker .................................................1086 – 1088Storage System Safety can .................................................................................... 1102Ventilator Ventilator ..................................................................................... 1100

From QUALITY BRANDS :

www.kawanlama.com 1057SAFETY AND PROTECTION EQUIPMENT

Order No. Type Description

MD0000101 10041818 Alpine Clear Lens

MD0000103 10041820 Alpine Gray Lens

MD0000104 10041823 Alpine Amber Lens


MD0000107 10070916 Vista Mirror Lens

MD0000105 10070914 Vista Clear Lens


MD0000030 697502 Clearview Clear Lens


MD0000026 697514 Arctic Clear Lens

MD0000027 697515 Arctic Gray Lens


MD0000028 10012843 Sierra Red/White/Blue Frame


MD0000086 10065848 Voyager Clear Lens


MD0000023 10026006 Aurora Grey Lens

MD0000025 10026005 Aurora Clear Lens

MD0000024 10026008 Aurora Blue Lens

Features :• Fit over many prescription glasses• Integrated side shields• Clear lens• ANSI Z87.1

Impression II• Vertical and horizontal tem-

ple adjustment• Extended cheek and brow

protection• Platinum colored temples• Gray and clear anti-fog lens• ANSI Z87.1

Pyreness• Dual injection soft tip temples• Available in black frame and

clear, gray and amber lens• Meets Z87+ and CSA Z94.3• ANSI Z87.1

Voyager Clear Lens• One-piece wrap around polycarbonate lens• 99% UV protection• Anti-fog lens available• Color: clear, gray, and indoor/

outdoor mirrored lens• ANSI Z87.1

Features :• Integrated side shield• Vented brow guard• Adjustable temples• Red/white/blue frame• Antifog, clear lens• ANSI Z87.1, CSA 294.3

EYE PROTECTION

EYE

PRO

TECT

ION

Eye Protection

Eye Protection Eye Protection

Eye Protection

Eye Protection

Eye Protection

Eye Protection

Eye Protection

Aurora

Features :• Lightweight• 8 base curved lens• Comfortable to wear• Available in clear, gray, amber, and indoor/outdoor lens• Anti -fog lens available• ANSI Z87.1

Features :• 99% UV protection• Polycarbonate lens for

high impact protection• One-piece lens• Color: clear, gray, and

indoor/outdoor lenses• ANSI Z87.1

Features :• Stylish cat’s eye look• Built in side impact• Lens : clear, gray• ANSI Z87.1

Features :• 9-base curved lens• Spring-comfort adjustable nose • Soft end temples• Vertical temple adjustment• Lens : gray, blue mirror, and clear• ANSI Z87.1

19

SAFETY AND PROTECTION EQUIPMENT1058

EYE PROTECTION


MD0000109 10070918 Grey Lens Easy-Flex

MD0000110 10070919 Amber Lens Easy-Flex

MD0000111 10070920 Blue Lens Easy-Flex

MD0000112 10070921 Orange Lens Easy-Flex

MD0000108 10070917 Clear Lens Easy-Flex


MD0000032 695850 Soft Frame Perforated


MD0000033 696776 Clearvue 200 Clear


MD0000035 461027 Respirator Goggles


MD0000034 695851 Softframe 4-Vent


PR0000097 GCV145:CL Chemical Google Clear


PR0000095 GCV76EP:CL Clear Lens

Features :• 99% UV protection• Polycarbonate lens for high impact

protection• Hard-coated lens• Color: clear, gray, amber, ”180 blue”

mirror, and ”sky orange” mirror• ANSI Z87.1

Features :• Protection for small flying

object, chemical splash and harmful ultraviolet ray

• Clear frame color• Indirect vent• Anti-fog lens• For high impact• ANSI Z87

Features :• Clear frame color• 4-vent frame style• Anti-fog lens• For high impact, constructed to

wear with MSA respirator• ANSI Z87

Features :• Effectively fit most facial contours• 060 inch thick polycarbonate lens

provides wide and undistorted field of vision

• The scratch resistance coating is uneffected by most organic solvents, ammoniacal,

and alkaline detergents• ANSI Z87

Features :• Wrap around lenses• Adjustable length side arms • Hard coat anti scratch lens • Certified to AS/NZS 1337 me-

dium velocity impact• Lightweight for all day comfort• Wrap around styling for maximum protection • Anti fog lens for humid environment

Features :• Extra wide vision chemical/Impact

goggles with indirect vents• Ideal for wearing with prescription

spectacles• Medium impact anti-fog lens

(clear lens)• AS/NZS 1337

EYE PROTECTIONEye Protection

Soft Frame Perforated

Softframe 4-Vent

GCV145:CL Clear Lens

Discovery

Respirator Goggles

Clearvue 200 Clear

Features :• Clear frame color• Perforated frame style• Standard and anti-fog lens• For high impact• ANSI Z87

Features : Chemical and impact goggles, clear lens• Soft face seal• Indirect ventilation for greater comfort • AS/NZS 1337

EYE

PRO

TECT

ION



PR0000095 GCV76EP: CL Clear Lens


PR0000099 GWL44:5 Welding Goggles


PR0000104 S16ECN Clear

PR0000105 S16ESN Smoke


PR0000424 S98EC:BK Safety Spectacles


PR0000570 S99 Icon Safety Spectacles


PR0000096 GCV90:CL Chemical Google Clear


PR0000592 GCV76:CL Chemview Goggless

EYE PROTECTION

EYE PROTECTION

GCV76: CL

GWL44S16 Pospect II

S98 Cruiser

S99 Icon Safety Spectacles

GCV90:CL

GVC76:CL

Features :• Soft face seal• Indirect ventilation for greater

comfort • AS/NZS 1337

Features :• Soft traditional lift-up goggles• Lift-up lens holder fitted

with 50mm• Shade 5 welding filter• PR249 1338.1, AS/NZS 1337


MD0000288 220343 Flip Up Welding Goggles

Flip Up Welding Googles

Features :• Dual purpose goggles• Ideal for gas welding, chipping,

and grinding• Easy replacement welding filter

and protective cover lenses• Shade 10 welding lens

Features :• Ultra wide vision chemical

goggles• High quality lens (clear lens)• Compatible with prescrip-

tion spectacle• Comfortable wide face seal• AS/NZS1337.1

Features :• Chemical and impact goggles• Soft face seal• Indirect ventilation for greater comfort• Available with rubber foam face

seal GCV76RB• Replacement lenss GL76

Features :• Clear and smoke polycarbonate

overspec• One piece moulded lens for

strength• Anti scratch lens • Color lens: clear, smoke• AS/NZS1337.1

Features :• Anti-fog lens with robust

nylon frame• 4 position adjustable arms

with ratchet adjustment• Very comfortable and light-

weight• Multi-fit nose bridge• Color lens: clear, smoke, blue• AS/NZS1337.1

Features :• All lens have anti-scratch coating• Soft pads for greater comfort, anti-fog

lens, medium impact protection• 4 way adjustable arms for enhanced fit and comfort• Provide 99.9% solar UV protection• Color lens: clear, smoke, amber• AS/NZS1337.1


PR0000621 S25ESM Silver Mirror

S25ES

Features :• Suitable for frontal and side protection• Wide vision wrap around• Medium Impact• 100% UV protection• Lightweight• Anti-scratch lens – increases lens durability

EYE

PRO

TECT

ION

Features :• Cup type, 50mm round shade no.5

polycarbonate lens• Strong rigid body fits snugly

around of the eyes• Use for gas welding, brazing, and

cutting


KW1000337 KW10-337 Welding Goggles 2 Round Shape

Welding Goggles

19


Spectacle Indoor Outdoor Lens

Spectacle Clear

NEWFeatures :• Adjustable temple, rotating up . and down• Nylon frame• Comfort and durable• 99% UV protection


KW1000539 KW10-539 Spectacle Clear w/Flexible Temple

KW1000540 KW10-540 Spectacle Clear Yellow Flexible Temple

KW1000541 KW10-541 Spectacle Clear Smoke Flexible TempleOrder No. Type Description

KW1000549 KW10-549 Spectacle Indoor Outdoor Lens

Features :• Polycarbonate frame• Light and simple• Fit to face• With side protection• 99% UV protection

NEW


KW1000543 KW10-543 Spectacle Golden with Nosepad

KW1000544 KW10-544 Spectacle Blue with Nosepad

Features :• Indirect ventilation, soft, flexible vinyl

frame, 50mm round shade no.5 flip front lens, can switch from welding to chipping for easy inspection

• For gas welding, brazing and cutting

Features :• Lift-front type holder, square lens• Used for both of welding• Chipping operations• Shade lens no.5

Features :• Indirect ventilation, soft, flex-

ible vinyl frame, lightweight, polycarbonate, and green lens shade no.5

• For gas welding, brazing, and cutting

Features :• Polycarbonate frame• Rubber nosepad• Flexible temple• Stylish model• Eyecatching color• Dual color frame• Soft nosepad, soft temples and

tips, wearing comfortable• 99% UV protection

Features :• With extremely large field of vision

and outstanding fitness• Side vented• Fits over personal spectacle• Great protection at upper and side• 99% UV protection

Features :• Nylon temple• Rubber nosepad• Stylish model• 99% UV protection• Comfort and softpliableNEW

NEW

NEW


KW1000336 KW10-336 Welding Goggles


KW1000335 KW10-335 Welding Goggles Square Flip Up


KW1000545 KW10-545 Spectacle Indoor Outdoor Lens w/Nosepad and Soft Temple

KW1000546 KW10-546 Spectacle Silver Lens w/Nosepad and Soft Temple

KW1000547 KW10-547 Spectacle Smoke Lens w/Nosepad and Soft Temple


KW1000334 KW10-334 Welding Goggles Round Flip Up


KW1000542 KW10-542 Spectacle Clear

EYE PROTECTION Welding Goggle

Welding Goggles Square Flip Up

Spectacle Indoor Outdoor Lens

Spectacle Clear

Spectacle Golden

Welding Goggles Round Flip up

Features :• Polycarbonate frame• Molding lens model• Fit to face• Light and simple• 99% UV protection

NEW

Spectacle Clear Fit Model


KW1000548 KW10-548 Spectacle Clear Fit Model

EYE

PRO

TECT

ION


HEARING PROTECTION

EYE PROTECTION

Premium Ear Plug Hearing Protection


MD0000264 10005607 Premium Ear Plug

Order No. Type DescriptionPR0000425 310-1001 Classic Plug UncordedPR0000426 311-1101 Classic Plug CordPR0000427 340-4004 Ultra Fit CordPR0000428 340-4002 Classic Plug Cord

HEARING PROTECTIONHearing Protection

PR-427 Ultra Fit CordPR-428 Ultra Fit Cord with Case• Reusable ear plug• Patented swept-back triple-flange design• Washable, promotes worker hygiene• Available corded with carrying case o corded in poly bag• NRR 21dB• SLC80 18dB

PR-425 Classic Plug UncordedPR-426 Classic Plug Cord • Slow recovery PVC foam provides with low pressure• Moisture resistant• Dermatologically safe foam is not irritating• Available uncorded or corded• NRR 29dB• SLC80 21dB

Formfit Disposable Foam Ear Plugs• Easy to use and affordable• Available in corded and uncorded

version• Dispenser boxes of 200 pair• NRR–29dB

MD-264 Premium Ear Plug• Easy to use and economical• Available in corded and uncorded

version• Dispenser boxes of 100 pair• NRR–25dB

Right• Has a complete range of earplugs, from disposable to reusable• Has excellent comfort and very good attenuation• Every plug is supplied with a hexagonal cavity• The foam pad is oval shaped to fit better in the outer ear

EYE

AN

D H

EARI

NG

PRO

TECT

ION


KW1000326 KW10-326 Grinding/Impact Goggles

Grinding/Impact Goggle

Features :• Indirect ventilation, soft, flexible

vinyl frame, extra wide vision, clear polycarbonate lens

• Ideal protection against chemical splash, impact resistant

Impact Goggle


KW1000550 KW10-550 Impact Goggles Clear, American Style

KW1000551 KW10-551 Rainbow Lens

NEWFeatures :• PVC frame• Very soft frame• Comfort and durable• American model• Best impact resistance• Include with head-

band strap


KW1000325 KW10-325 Grinding/Impact Goggles

Grinding/Impact Goggle

Features :• Direct ventilation, soft, flexible

vinyl frame, lightweight, polycarbonate lens

• Ideal protection against dust, impact resistant

19


HEARING PROTECTION

MD-122

Features :• A comfortable hearing protector equipped with a hard-wired lead (3.5mm)

and boom microphone• For connection to push-to-talk, or lapel microphone (no noise cancelling)• Available in cap and headband model• Noise-cancelling boom microphone permits two-way communication with

minimal interference from background noise• ANSI 53.19-1974, EN352, CSA CLASS A

MD-123

Features :• Designed spesifically for very

high noise levels• Ideal for airfields, power plants,

and other areas with intense noise

• NRR–26dB• ANSI 53.19-1974, EN352, CSA

CLASS A

Features :• Confortable to use• Offer force adjustment for individual fit• NRR–24dB• ANSI 53.19-1974, EN352, CSA CLASS A

Features :• Two separate, well-shielded micro-

phones for optimum stereo effect and location of sound direction

• Around 600 hours battery life with two standard AAA batteries

• AUX input for external audio sources • ANSI 53.19-1974, EN352, CSA CLASS A

Dispenser for Foamplug

Left/Right Medium Earmuf (23db)

HPE Muff

Connected by Cable Earmuff

EXC Muff

Supreme Pro


MDZ000004 766236 Dispenser for Foamplugs


MD0000309 10087436 Left/Right Medium Earmuf (23db)


MD0000038 10061229 EXC Muff


MDZ000001 10061285 Supreme Pro


MD0000036 10061271 HPE Muff


MD0000122 10064515Connected by Cable Earmuff

MD0000123 10064516

Features :• Dispenser for any foamplugs• Perfect for industries such as aviation, maintenance, textile, manufacturing, metal working, and construction

Features :• Thinner and more flexible headband

design• Suitable for all kinds of work environ-

ments• Available in three colors, yellow

(high), blue (medium), and white (low)

HEA

RIN

G P

ROTE

CTIO

N


HEARING PROTECTION

HPE Cap Model

Features :• Designed spesifically for very high noise levels• Ideal for airfields, power plants, and other areaswith intense noise• NRR–27dB• ANSI 53.19-1974, EN352, CSA CLASS A

Muff Only

Suprano Muff for Hats

Features :• Fit all full brim hats• Provide high-level hearing

protection• NRR – 25dB• ANSI 53.19-1974, EN352,

CSA CLASS A

Muff Only


MDZ000003 10034487 Suprano Muff for Hats

EXC Cap Model

Features :• It’s mounted at the helmet, and confortable• Offer force adjustment for individual fit• NRR–25dB• ANSI 53.19-1974, EN352, CSA CLASS A

Muff Only


MDZ000002 10061230 EXC Cap Model


MDZ000037 10061272 HPE Cap Model

KW10-314Ear plug with extra plug• Soft caps with flexible and durable band• Provides sufficient harmful noise reduction• Fit comfortably over the ear canal• Supply with spare plug• NRR : 22dB

KW10-312Ear plug foam with cord• Provides comfortable and close-

fitting seal against harmful noise• Soft foam material ear plug• One size fits all• NRR : 23dB

KW10-313Ear plug corded with case• Soft and thin pliable with triple flange

design• Reusable ear plug• Fit the ear canal perfectly• NRR : 22dB

KW10-407Helmet mounted ear defendersAny easy to attach helmet mounted ear defender which is suitable for use in medium duty industrial application

KW10-309Earmuff• Light in weight, the head-

band can be folded, it can be worn in 3 positions

• NRR : 26dB• Color : yellow

KW10-310Neckband earmuff• Conform to CE EN 352-

1:2002 standard• Twin stainless steel wires

connected wit PVC shrink tube

• Light in weight, it can be worn behind neck or under chin

• NRR : 26dB

KW10-311Earmuff• Conform to CE EN

352-1:2002 standard• Light in weight, it

can be worn in 3 positions overhead, behind neck or under chin

• NRR : 26dB

HEARING PROTECTIONHearing Protection Hearing Protection


KW1000312 KW10-312 Ear Plug Foam with Cord

KW1000313 KW10-313 Ear Plug Corded with Case

KW1000314 KW10-314 Ear Plug with Extra Plug


KW1000309 KW10-309 Ear Plug Yellow

KW1000310 KW10-310 Neckband Earmuff Red

KW1000311 KW10-311 Earmuff Red

KW1000407 KW10-407 Helmet Mounted Ear Defender

HEA

RIN

G P

ROTE

CTIO

N

19


HEAD PROTECTION

HEAD PROTECTION

Safety Helmet

Safety Helmet (Vented)

Head Protection

KW10-442 Safety helmet (Vented) yellow• Material : HDPE• 6 points tectonic harness• Ratchet wheel suspension • Highly absorbent sweatband• Color : white , yellow, red, and blue

KW10-441 WhiteKW10-443 RedKW10-194 Blue

KW10-343 Sports working cap medium• Designed for light protection against bumping or scraping with ABS shell and foam spacer• Light weight fashionable item of work wear• Ventilation holes provides users comfortable feelings

See from bottomABS shell and foam spacer

Safety Helmet• Polyethylene (PE) shell assembled with four-point adjustable nylon head

band ratchet suspension• Slotted sides to accommodate accesories, such as ear muff, visor, etc.• Available color: white, yellow, red, blue, green, and orange

KW10-319 KW10-320 KW10-324

KW10-322

Nylon head band ratchet

KW10-323 KW10-321

KW10-4044 points Harness

KW10-193 Chin strap for KW10-441,442, 443 and KW10-319 s/d 324• Flexible comfort chin strap

6 Points HarnessSuspensionKW10-478


KW1000319 KW10-319 Safety Helmet White

KW1000320 KW10-320 Safety Helmet Yellow

KW1000321 KW10-321 Safety Helmet Red

KW1000322 KW10-322 Safety Helmet Blue

KW1000323 KW10-323 Safety Helmet Green

KW1000324 KW10-324 Safety Helmet Orange

KW1000404 KW10-404 4 Points Harness

Order No. Type DescriptionKW1000341 KW10341 Sports Working Cap Large

KW1000343 KW10343 Sports Working Cap Medium

Order No. Type DescriptionKW1000194 KW10-194 Safety Helmet (Vented) BlueKW1000441 KW10-441 Safety Helmet (Vented) WhiteKW1000442 KW10-442 Safety Helmet (Vented) YellowKW1000443 KW10-443 Safety Helmet (Vented) RedKW1000193 KW10-193 Chinstrap for KW10-441,442, 443 and

KW10-319 s/d 324KW1000478 KW10-478 6 Points Harness Suspension

MD-8 WhiteMD-9 BlueMD-10 YellowMD-11 OrangeMD-13 GreenMD-14 Gray

Bump Caps• Moulded from high density poly-

ethylene• Cool and lightweight : confortable• Smooth surface easy to clean• Application in pest control, meter

reading, food beverage processing, meat packing, and auto repair.

• Optional suspension : staz-on, 1-touch, fas-trac, swing ratchet, unipro• Extended peak for greater visibility and protection• Color : white, blue, yellow, orange, red, green and gray• ANSI Z89.1• Electrical performance class E (proof tested at 20 kV)

MD-12 V-gard helmet red• Impact resistant helmet type 1 (top impact) • Made of PE shell

KW10-341 Sports working cap large

HEA

D P

ROTE

CTIO

N


Features :• Made of pe shell• Vented version for improved air circulation • Lightweight design for added comfort• Lateral contours above the ear for easy integration of hearing protection• Color : white, blue, yellow, red, green• ANSI Z89.1• 6-Point fastrac suspension

Features :• Lightweight• Good dielectric properties (class e and g)• Single rib design• Made of polycarbonate• ANSI Z89.1• Color: white, yellow gray, blue, orange, green, red, and bright orange

Features :• Lightweight• Good elevated temperature capabitity• Rigid design• ANSI Z89.1• Provide slots for mounting hearing

protection muffs, welding shields, and faceshields

Features :• Heavy-duty construction• Use in steel mills and heavy industry• Color: natural tan, white, yellow, red,

green, gray, blue, and orange• ANSI Z89.1

Features :• High temperature injection moulded

helmet shell• Integrated safety eye screen• 9% gold coating or transparent spherical

shaped face shield• Very comfortable leather headband• EN 443

PR-27 HC71 Safety helmet red• Shorter peak for improved visibility• ABS plastic shell• 6 point nylon webbing headgear• Moulded slots accepts all protector accessories• Color : white, yellow, blue, green, and red• AS/NZS 1801

PR-23 WhitePR-24 YellowPR-25 BluePR-26 Green

PR-11 HC53 Safety helmet Yellow

• ABS plastic shell• Robust and comfortable

molded one piece headgear• Moulded slots accepts for

accessories• Color: white, yellow, blue,

green, and red• AS/NZS 1801

PR-10 WhitePR-12 OrangePR-13 BluePR-14 GreenPR-15 Red

Features :• Suitable for outdoor work• Wide brim for shade• Neck flap to prevent sunburn• Suits MSA advance, coolgard,

elite and V-gard

HEAD PROTECTIONAdvance Cap Vented

Head Protection

Thermalgard

Fire HelmetTopgard

Chin Strap Elastic Skullgard


MD0000017 10034029 Advance Cap Vented Helmet Yellow, 6-Point Fastrac Suspension


MD0000021 475384 Topgard (Fastrac) Red

MD0000020 454721 Topgard Cap (One Touch) Yellow


MD0000094 220553 Chin Strap Elastic


MD0000022 800359 Thermalgard, Fas-trac, Orange


MD0000183 GA2453BJ04 F1 SF Fire Helmet


MD0000298 454619 Skullgard

HEAD PROTECTIONHead Protection

Order No. DescriptionPR0000010 HC53 Safety Helmet WhitePR0000012 HC53 Safety Helmet OrangePR0000013 HC53 Safety Helmet BluePR0000014 HC53 Safety Helmet GreenPR0000015 HC53 Safety Helmet RedPR0000011 HC53 Safety Helmet Yellow

HEA

D P

ROTE

CTIO

N

19


Features :• Easy to don and doff, this CFR system is

compliant with NFPA 1976-2000• Designed and approved for use with the

metro 660C• Components consist of an aluminized

PBI/kevlar layer, vapor berrier, and inner layer

MD-282 Rescue set in pouch• With constant air flow to safe people out of

dangerous atmospheres• Connects to second medium pressure connec-

tion of BA set• Flame retardant material for pouch and hood• Easy to apply : simple neck lace

HEAD PROTECTION

Features :• Rescue helmet for high angle rescue in

mountain environments, natural disaster rescue operations, and forest work operations following storms

• EN 12492

F2 X- TREM

Crash Fire Resque Rescue Set In Pouch


MDZ000005 F2 X-TREM F2 X- TREM for Hazardous Eviron-ment Protection


MD0000262 10041993 Crash Fire Resque (CFR) Proximity System Hood


KW1000315 KW10315 Head Gear Face Shield, Yellow W/ Clear Visor

KW1000316 KW10316 Head Gear Face Shield, Yellow W/ Dark Green Visor

KW1000409 KW10409 Mesh Face Shield with Earmuff


KW1000413 KW10-413 Faceshield Clear with Visor

KW1000317 KW10-317 Welding Hand Shield

Features :• Escape hood• To protect persons endangered by

smoke and gasses generated by fire • En 403 : 2004• Application for highrise building• Available in wall box

S- CAP

Order No. Type DescriptionMD0000281 10064645 S- CAP Escape Hood in Wall Box

Order No. Type DescriptionMD0000282 10040152 Rescue Set In Pouch

FACE PROTECTIONHead Gear and Face Shield Faceshield Clear with Visor Welding Handshield

Head Gear and Face Shield• Headgear with ABS browguard eliminated forehead injury• Completed with 8” x 15-1/2” aluminium bound PC clear visor• Provides protection against foreign particles, chemical splash, dust, heat,

and impact resistance

KW10-315

KW10-409Mesh face shield with earmuffMesh faceshield with earmuff for gardening and forest working

KW10-316KW10-409

KW10-413Faceshield clear with VisorThis safety visor has been designed with 2 point travel and either springs firmly in place down onto the peak of the helmet (both standard peak and short peak) or is sprung in its stand off position raised conveniently out of the way.

KW10-317 Welding hand shield• Toughness and moisture proof

polypropylene straight shell• With fixed front 2” x 4-1/4” lens,

shade : 10• For eye and full face protection

from sparks and spatter where little or no hands-on work is performed. Handle outside.

HEA

D A

ND

FA

CE P

ROTE

CTIO

N


MD-206 10036456 Instant Release for welding helmet

10037098Defender + frame for slotted cap

Features :• Straight shell impact resistance• Flip front lens 2” x 4-1/4” for easy

weld inspection, durable, and pro-tects upper chest and throat from sparks and spatter

Features :• Viewing area (mm (inch)) : 98 x 43 (3.86” x 1.69”)• Size of cartridge (mm (inch)) : 110 x 90 x 9 (4.33” x

3.54” x 0.35”)• UV / IR protection : Up to shade DIN16 at all time• Light state : shade DIN 4• Variable shade : from DIN 9 to DIN 13• Power supply : solar cells, no battery change re-

quired• Power on/off : fully automatic• Sensitivity : outside can be continued adjustable• Function : “WELDING”/”GRINDING” can be selective• Switching time : light to dark : 1/30000 s (0.000033

Sec) dark to light : 0.25~0.8 S at “short-middle-long” position

• Operating temperature : -5oC to +55oC (23oF to 131oF)

• Storing temperature : -20oC ~ + 70 oC (-4oF to 158oF)

• Helmet material : high-impact resistant plastic/polyamide (nylon)

• Total weight (gr) : 460 or 440

Features :• Available in plastic and metal• Come in cap and head models• ANSI Z87

Features :• Available in plastic and metal• Come in cap and head models• ANSI Z87

Features :• Snap in earmuff option• Easy in, easy out visor replacement• Long lasting O-ring pivot-join

design

Features :• Use where no hard hat is required • Extended high-temp sparkgard

available and for use in temperature up 250°F

MD-40 Welding Shield Non Coat Black• Protect worker’s eyes and face from infrared burn, flying spark hot metal and chips• Shade 5, 6, 10, 12,14• ANSI Z87

Front Only

Adapter and Plastic Instant Release Attachments for Welding Shield

• Kits permit to easy attachments of welding shields and sparkgard faceshield with visors

• Attach to MSA helmet

• ANSI Z87

FACE PROTECTIONWelding Helmet Black Welding and Grinding Helmet , Auto Dark Filter


KW1000318 KW10-318 Welding Helmet Black

KW1000391 KW10-391 Welding and Grinding Helmet , Auto Dark Filter


MDZ000006 10005383 Defender and Foldback Face Shield Frame (Hat Model)


MD0000302 10021614 Defender and Face Shield Frame for Slotted Caps


MDZ000007 10021610 Defender and Face Shield Assemblies


MDZ000009 10016742 Defender and Foldback Face Shield Frame (Cap Model)

Order No. Type DescriptionMD0000040 695946 Welding Shield Non Coat Black

MD0000206 10036456 Instant Release for Welding Helmet

FACE PROTECTION

Defender and Face Shield Frame for Slotted Caps

Defender and Foldback Face Shield Frame (Hat Model)

Defender and Face Shield Assemblies

Welding Shield Non Coat Black

Defender and Foldback Face Shield Frame (Cap Model)

FACE

PRO

TECT

ION

19


Features :• High cut resistance and durable• Strong and lightweight• Flame resistant and low thermal conductivity• Comfortable, breathable and superior dexterity• Ideal for automotive, metal stamping, sheet

metal fabrication, foundries, pulp, and paper, fire fighter, oil, and gas

• Meet ASTM F1790-04 for cut protection per-formance test

• Meet ASTM F1060 for thermal protection per-formance test

Features :• Class 1 medical device• Application : for food preparations, medical, and maintenance • 100% non-latex exam gloves• Disposable and ambidextrous glove• 100 glove per dispenser box

PR-476 (S)PR-503 (M)PR-641 (L)

Features :• Ergo-design for maximum comfort• Breathable cut-resistant aramid linear• Color coded cuff indicating size

Features :• Application : for material handling, assembly,

shipping, receiving, maintenance, and assembly• Excellent grip, abrasion resistant, and half coated• Breathable rubber nylon with coating• Rugged surface

Features :• “A” grade cow grain leather driver glove• Comfortable soft feel• Wing thumb, offering comfort and good flexibility• CE standard compliant, EN388/03 and EN420/03• Application for : general industry, material handling,

forklift operator, driver, etc.• Generous sizing, manufactured to CE standards sizing

equirement

MD-83 Leather Glove

HAND PROTECTION

HAND PROTECTION

HAND PROTECTION

Kevlar Glove

Nitri-Care

Hand Protection

3811 Skinny Dip

Leather Glove

Kevlar Glove for Fireman


D70000020 - Kevlar Glove for Fireman


D70000069 - Kevlar Glove


MD0000083 225030 Leather Glove


PR0000476 3005PFS Nitri-Care (S)

PR0000503 3005PFM Nitri-Care (M)

PR0000641 3005PFL Nitri-Care (L)

Cotton Glove • For KW10-394 Size 8”• For KW10-395 Size 8.5”

Cotton Glove PVC Dots • Natural T/C with PVC dots on one side• Size 9” length 23cm

KW10-396 KW10-401KW10-571 KW10-395

(Natural TC)KW10-394(100% Cotton)


KW1000571 KW10-571 Catton Glove Grey PVC Dot 9” (23cm)

KW1000395 KW10-395 Catton Glove White 8.5” (22cm)

KW1000396 KW10-396 Catton Glove Black PVC Dot 9” (23cm)

KW1000401 KW10-401 Catton Glove White PVC Dot 9” (23cm)

KW1000394 KW10-394 Catton Glove White 8” (20cm)

Features :• Unsupported nitrile glove, finish

case hardened to enhance chemical and abrasion resistance

• B730 13” length, B747 19” length

B730/B747 Nitri-Solve

Order No. Type DescriptionPR0000159 B730-09 Nitri-Solve (873)PR0000160 B747-09 Nitri-Solve (160)

Features :• Class 1 medical device• Application : for food preparations, medical, and

maintenance• Nitrile coating, smooth finish, palm coated• Alternative to cotton and lightweight leather gloves

Nitri Flex Lite


PR0000461 4500-09 Nitri Flex Lite


PR0000460 3811-08 Skinny Dip

HA

ND

PRO

TECT

ION


Features :• Green rubber half coated• T/C knetted base glove• Abrasion and cutting resistance

Features :• Black leather palm top-thumb• Gunn cut stretch-knit back• Elastic band cuff magic tape strap• Size medium and large

KW10-239 (M)

Features :• Yellow leather palm wing-thumb• Gunn cut drill cotton back• Knuckle strap shirred elastic back• Rubberized safety cuff

Features :• Full cow split welding straight-thumb• Clute cut three ribs back• Full free lining• Grey color 14” length

Features : • Fully coated PVC glove• Smooth finish with interlock line• Size 40cm length

KW10-250 Latex glove (M) • Lined latex household glove• Size medium and large 13” length

KW10-251 Yellow color (L)KW10-420 Latex industrialFeatures :

• Split cowhide leather palm wing-thumb

• Gunn cut stripe cotton back knuckle strap

• Knuckle strap• Rubberized safety cuff

Features : • Yellow suede leather palm

wing-thumb• Stretch-knit back wing-thumb• Clute cut elastic band cuff

magic tape strap• Size medium and large

KW10-243 (L)

HAND PROTECTIONRubber Coating Glove

Welding Glove

Leather Work Glove

Leather Work Glove

Leather Work Glove

Leather Work Glove

Latex Glove

PVC Glove


KW1000340 KW10-340 Rubber Coating Glove


KW1000239 KW10-239 Leather Work Glove (M)

KW1000240 KW10-240 Leather Work Glove (L)


KW1000243 KW10-243 Leather Work Glove (L)

KW1000242 KW10-242 Leather Work Glove (M)


KW1000250 KW10-250 Latex Glove (M)

KW1000251 KW10-251 Yellow Color (L)

KW1000420 KW10-420 Latex Industrial


KW1000249 KW10-249 PVC Glove

Order No. Type DescriptionKW1000245 KW10-245 Welding Glove (16”)KW1000246 KW10-246 Welding Glove (14”)KW1000247 KW10-247 Welding Glove (14”)KW1000419 KW10-419 Welding Glove (12”)

Order No. DescriptionKW1000244 Leather Work Glove

Order No. DescriptionKW1000241 Leather Work Glove

HA

ND

PRO

TECT

ION

19


RESPIRATORY PROTECTION


20 Disposable P2 Respirators (20/pack)

Affinity Plus for Welding

Advantage 200LS

Respiratory Protection



Comfo Classic

Ultra Twin

Feature :Provide protection against mechanically and thermally generates particulates up to 10 times the exposure standard such as silica, coal, lead dust, asbestos fibre, welding, soldering, and zinc oxide fumes.

Features :• Have inturned lip around

the edge for a secure, and comfortable seal.

• Rugged construction• Polycarbonate lens• Meet ANSI Z87.1• A large chin cup makes it

easy to position

Features :• Twin filter model• Lightweight and flexible, soft pliable peel• Wide sealing surface• Contoured mask maximises wearer’s vision• Meet ANSI Z87.1• Softer facepiece is made from a clear blue

thermoplastic rubber

MD-06 GMA P100 Organic vapour cartridges • Organic vapours (Up to 1000 ppm) and harmful dusts,

mists, pollen, fumes(GMA P100)• Used with comfo classic

half-mask respirator or ultra twin fullface mask

• NIOSH-approved (to 42 CFR, part 84)

Features :• Contoured and lightweight facepiece• Excellent chemical resistance• Large inhalation/exhalation ports• Easily adjustable cradle headband• Meet ANSI Z87.1• Features a unique face seal design

MD-02 GMA Advantage organic vapour cartridges • Against organic vapours (up to 1000

ppm), harmful dusts, mists, pollen, and fumes• Used with advantage 200 LS respirator

half-mask• NIOSH-approved (to 42 CFR, part 84)

MD-07 GME Multigas Cartridges • Cartidge for organic

vapour, chlorine, SO2, Clo2, hydrogen chloride, Nh3, etc.

MD-3 GME Advantage Respirator multi purpose gase• The service time depends on the conditions of use• Effective for organic vapours and many gases

including Cl, SO2, NH3, etc. • Light weight, low profile performance and fit both

200 LS half mask and 3000 full facepiece advan-tage respirator

• NIOSH approval

OptimAir 6A PAPR • Filtering contaminates from ambient air

and providing a constant flow to either a facepiece or hood

• Included motor/blower module and rechargeable NiCad battery

• Use two filters

OptimAir 6A PAPR for homeland security

• Use belt-mounted motor/blower and combination cartridge

• Maintenance-free lithium battery with 10-years shelf life

• Optional rechargeable NiCad battery

Features :• Lightweight and comfortable• Snug fit and smooth material• Pre-shaped nose clip with

plastic attachments• Color coding for quick identifi-

cation (Red, yellow and green)• Universal size for easy selection

and less inventory


PR0000307 RDP2 20 Disposable P2 Respirators (20/pack)

Order No. Type DescriptionMD0000359 10042752 Affinity Plus for Welding

Order No. Type DescriptionMD0000001 815692 Advantage 200LS

Order No. Type DescriptionMD0000005 480259 Ultra Twin

Order No. Type DescriptionMD0000004 808071 Comfo Classic

RESP

IRAT

ORY

PRO

TECT

ION


RESPIRATORY PROTECTIONAdvantage 410 Respirator Advantage 3000


Features :• Twin filter model• Lens has a scratch

resistant coating• Uses same cartridges

and filters as the advantage 200LS

• Meet ANSI Z87.1

MD-292 Advantage 410 Respirators • User-friendly• A new member of the advantage family• Available in single thread and twin

bayonet• The one-piece nose cup is made of soft

over-molded silicone and rigid plastic

D107000 Combined Filter forAdvantage 410 • The service time depends on the

conditions of use• Effective for Particle, Organic gases and

Inorganic gases• Particle filters can be used against

radioactive contaminants, spores, bacteria, virus, and proteolytic enzymes

PR- 57 RQ2000• Economical neo-rubber

robust design• Twin filter model• Standard AS/NZS1716

PR-62 RC56 Chemical cartridge• Against organic gases

and vapour• Used for RQ1000, RQ2000PR-60RC80 Chemical and dust

cartridge• Against organic and

inorganic gases and vapour and agriculture insecticides, toxic dust, mists and fumes

• Used for RQ1000, RQ2000PR-61 RC64 Dust cartridge• Against toxic dust, mists

and fumes• Used for RQ1000, RQ2000

Industrial-Size and Super-Size Gas Mask• Design for respiratory protection

againts a specific gas or group of gases as indicated by canister identification

• The super-size gas mask have a window-cator canister with contains an indicators to show the effectiveness of the canister againts certain contaminants

• Never be used in confined spaces or where oxygen deficiency and high gaseous concentration may occur

PR-421 RFF60• Soft silicon face seal• Low profile visor and filter positioning

provides panoramic vision• Speech diaphragm facilitates clear

communication• Standard AS/NZS1716

PR-45 RC224 Cartridge• Acid gases and vapour plus solid and liquid particles (include dusts, mists,

fumes, bacteria, and viruses)• Type A2B2E2P3, used for RFF60 and KW10-181


MD0000292 10102277 Advantage 410 Respirators

MDZ000011 D107000 Combined Filter for Advantage 410

Order No. Type DescriptionKW1000299 KW10-299 Half Mask Respirator (Single)

Order No. Type DescriptionKW1000300 KW10-300 Half Mask Respirator (Double)


PR0000062 RC56EP Chemical Cartridge

PR0000060 RC80EP Chemical and Dust Cartridge

PR00000 57 RQ2000:SM RQ2000

PR0000061 RC64EP Dust Cartridge


PR0000421 RFF60:SM RFF60 Cartridge

PR0000045 RC224 RC224 Cartridge


MD0000091 10028995 Advantage 3000




Half Mask Respirator (Single) Half Mask Respirator (Double)

RFF60, RC224 Cartridge

Features : • Single cartridge respirator half mask• Soft durable pliable rubber facepiece• Durable elastic headbands, deep chin

cup for a roomy• Comfortable seal and easy exhaling• Cartridge sold separately

Features :• Double cartridge respirator half mask• Soft durable pliable rubber facepiece• Durable elastic headbands, deep

chin cup for a roomy• Comfortable seal and easy exhaling• Cartridge sold separately

RESP

IRAT

ORY

PRO

TECT

ION

19



OIL ABSORBENT


Dust Mask Disposable

N95 Dust Mist

Dust Mask

Active Carbon Filter Mask



KW1000301 KW10-301 Dust Mask

KW1000302 KW10-302 Refill


KW1000303 KW10-303 Active Carbon Filter Mask

KW1000304 KW10-304 Refill


KW1000507 KW10-507 N95 Dust Mist with Valve

KW1000508 KW10-508 N95 Dust Mist Active Carbon with ValveOrder No. Type Description

KW1000521 KW10-521 Oil Absorbent Cotton

KW1000522 KW10-522 Oil Absorbent Rope


KW1000505 KW10-505 Dust Mask Disposable

Order No. Description

KW1000017 Acid Gas and Inorganic Cartridge

KW1000018 Organic Vapour and Paint Spray Cartridge

KW1000019 Dust, Mist, and Fume Cartridge

Acid Gas and Inorganic Cartridge

• Against acid gas and inorganic vapors of low toxicity

• Size: Ø 70 x 30H(mm)• Used for KW10-299, KW10-300

Dust, Mist, Fume, and Cartridge

• Against dust, mist, fumes and asbestos

• Size: Ø 70 x 30H(mm)

• Used for KW10-299, KW10-300

Organic Vapour and Paint Spray Cartridge • Against paint spray

and organic vapors of low toxicity

• Size: Ø 70 x 30H(mm)

• Used for KW10-299, KW10-300

KW10-17 KW10-18 KW10-19

KW10-507 N95 Dust mist with valve • Durable elastic headband• Metal noseclips to fit individual

facial contours• Comfortable type include valve

KW10-508 N95 Dust mist active carbon with valve • Durable elastic headband• Metal noseclips to fit individual

facial contours• Comfortable type include valve

KW10-521 Oil Absorbent Cotton

KW10-522 Oil Absorbent Rope

NEW NEW

NEWNEW

Features : • Durable elastic headband• Metal noseclips to fit individual facial contours• Does not impair breating,

voice, and vision• No interference with glasses

NEW

KW10-301 Dust mask • Lightweight, PE frame

covered by polyester fiber• Comfortable for against

dust and mist • Filter is replaceable

KW10-302(Refill)

Features : • Lightweight• Metal noseclips to fit individual facial

contours• Does not impair breating, voice and vision• No interference with glasses

NEW

KW10-303Active carbon filter mask • Lightweight, PE frame covered by

polyester fiber, comfortable• With active carbon filter protection

againt toxic dust and filter out odors• Active carbon filter is replaceable

KW10-304 (Refill)• To filler out odors, dust and mist

RESP

IRAT

ORY

PRO

TECT

ION

AN

DO

IL A

BSO

RBEN

T


KW1000506 KW10-506 N95 Dust Mist


Order No. Type Description SizeKW1000558 KW10-558 Wearpack, W/Reflective, Navy Blue MKW1000559 KW10-559 Wearpack, W/Reflective, Navy Blue LKW1000560 KW10-560 Wearpack, W/Reflective, Navy Blue XLKW1000561 KW10-561 Wearpack, W/Reflective, Royal Blue MKW1000562 KW10-562 Wearpack, W/Reflective, Royal Blue LKW1000563 KW10-563 Wearpack, W/Reflective, Royal Blue XLKW1000564 KW10-564 Wearpack, W/Reflective, Red MKW1000565 KW10-565 Wearpack, W/Reflective, Red LKW1000566 KW10-566 Wearpack, W/Reflective, Red XLKW1000567 KW10-567 Wearpack, W/O Reflective, Navy Blue MKW1000568 KW10-568 Wearpack, W/O Reflective, Navy Blue LKW1000569 KW10-569 Wearpack, W/O Reflective, Navy Blue XL


KW1000385 KW10-385 PU Raincoat Fluro Orange, Size L

KW1000386 KW10-386 PU Raincoat Fluro Orange, Size XL

KW1000387 KW10-387 PU Raincoat Fluro Lime, Size L

KW1000388 KW10-388 PU Raincoat Fluro Lime, Size XL

KW1000402 KW10-402 Rainsuit PU/Polyester w/Pants Yellow, Size XL

KW1000405 KW10-405 Rainsuit PVC Yellow/Dark Blue, Size M

KW1000406 KW10-406 Rainsuit PVC Yellow/Dark Blue, Size L

KW1000529 KW10-529 PVC Raincoat in Navy Blue Colour (M)

KW1000530 KW10-530 PVC Raincoat in Navy Blue Colour (L)

KW1000531 KW10-531 PVC Raincoat Camouflage Colour (M)

KW1000532 KW10-532 PVC Raincoat Camouflage Colour (L)

WEARPACKWearpack American Drillwith ReflectiveAvailable colours

WEARPACKFeatures:• Original american drill material (only for kw10-558 sd 566)• Side tools hanging rope included

(only for kw10-558 sd 566)• Import quality reflective (Only for

kw10-558 sd 566)• High quality zipper , and velcro• Common type of color (royal blue,

navy blue, red), others color available• Double protection zipper and velcro• Size M, L and XL• 100% Original cotton and nomex

available, based on inquiryBenefit:• Comfort and fit model• Can be used in factory, education, contractor, mining, oil, and gas

KW10-405 Raincoat suit yellow/black • Jacket: 300D oxford/PU, with 190T taffeta lining• Pants: 300D oxford/PU, without lining

KW10-405 (M)KW10-406 (L)

Raincoat PU/Polyester 0.4mm • Concealed hood• Two reflective straps on arms, two reflec-

tive around body• Storm front with zipper and buttons• Windcuffs, two pockect with flaps, flaps

with buttons• For KW10-385 and KW10-387 size L• For KW10-386 and KW10-388 size XL

KW10-386 Fluro Orange (XL)KW10-388 Fluro Lime (XL)

KW10-385Fluro orange (L)

KW10-387Fluro lime (L)

KW10-384 Rainsuit PU/Polyester 0.4mm (L) • Concealed hood• Storm front with zipper and buttons• Two pockect with flaps, elastic cuffs• Trouser with drawstring

KW10-402 (XL)

PVC Raincoat in navy blue colour

KW10-529 size (M)KW10-530 size (L)

PVC Raincoat Camouflage Colour

KW10-531 size (M)KW10-532 size (L)

NEW

NEW

PROTECTIVE CLOTHINGHigh Visibility Reflective Vest High Visibility Reflective Vest

Wearpack

High visibility reflective vest • Two reflective straps 63x65cm• Provides maximum visibility for safety• Light weight and durable• Flourescent yellow and flourescent red available• Application for construction, workers, street

workers, public utilities, and policemen, etc.• Size : all size• For KW10-399 color fluro orange mesh type• For KW10-399 color fluro lime mesh type

KW10-389 KW10-390

KW10-399 KW10-400

Plastic safety vestMesh with White reflectiveTape

KW10-533 (M)KW10-534 (L)

NEW

Order No. Type DescriptionKW1000389 KW10-389 Safety Vest Fluro OrangeKW1000390 KW10-390 Safety Vest Fluro LimeKW1000399 KW10-399 Safety Vest Mesh Type, Fluro OrangeKW1000400 KW10-400 Safety Vest Mesh Type, Fluro Lime

KW1000533 KW10-533 Plastic Safety Vest Mesh withWhite Reflective Tape (M)

KW1000534 KW10-534 Plastic Safety Vest Mesh withWhite Reflective Tape (L)

PRO

TECT

IVE

CLO

THIN

G

19



KW1000379 KW10-379 Life Vest Yellow/Grey for Youth

KW1000380 KW10-380 Life Vest Red/Grey S/M

KW1000382 KW10-382 Life Vest Yellow

KW1000383 KW10-383 Life Vest Red

KW1000470 KW10-470 PVC Yellow Apron

KW1000471 KW10-471 PVC Yellow Sleeve Cover

KW1000480 KW10-480 Welding Appron Brown Colour

KW1000557 KW10-557 Welding Sleeve Brown Colour

PROTECTIVE CLOTHING

PROTECTIVE CLOTHING

Protective Clothing

KW10-470 PVC Yellow Apron• Thickness : 0.3mm• Size Apron : 90 x 120cm

KW10-471 PVC Yellow Sleeve Cover• Thickness : 0.3mm• Size Sleeve : 45,7cm

KW10-382 Life vest yellow • 200D*118T nylon

oxford• 100% PE foam floation• All Size

KW10-380Life Vest Red/Grey S/M• 200D*118T nylon oxford• 100% PE foam floation• For KW10-380 (S/M) 28”-40”• For KW10-381 (L/XL) 40”-50”

KW10-557Welding sleeve brown colour• Cowsplit leather• With Elastic band• Length 40cm

KW10-480Welding appron brown colour

NEW

NEW

KW10-383 Life vest red • 200D*118T nylon

oxford• 100% PE foam

floation• All Size

KW10-379 Life vest yellow/grey for youth • 200D*118T nylon

oxford• 100% PE foam

floation• For youth 25”-29”

Tyvek Tychem

Features :• Proprietary fabric technology only

available from DUPONT• Soft, lightweight, and breathable• Antistatic, non-linting, and durable• Protection against a variety of

liquid and solid chemicals, parti-cles and hazardous fibres such as asbestos and fibreglass, lead, paint, and aerosols

• Available in white• 1. 3-piece hood 2. Elasticated facial opening 3. External stitched seams

(3-thread overlock) 4. Elasticated waist 5. Elasticated cuffs and ankles 6. Zipper flap 7. Additional gusset fabric

D7-1 (S), D7-2 (M), D7-3 (L), D7-17 (XL)

Features :• DuPont ”TYVEK” with a specialised

polymeric coating• 100% particle tight and resist

splashes of pressures up to 2 bar• Total protection against ultra fine

hazardous dusts and powders, con-centrated inorganic acids and bases, and water based salt solutions

• Also suitable protection against body fluids, blood, and blood bourne pathogens

• 1. Elasticated facial opening 2. Stitched and overtaped seams 3. Elasticated cuffs and ankles 4. Double self-adhesives zipper flap


D70000001 Tyvek (S)

D70000002 Tyvek (M)

D70000003 Tyvek (L)

D70000017 Tyvek (XL)


D70000006 Tychem C (L)

D70000024 Tyvek (M)

D70000025 Tyvek (XL)

PRO

TECT

IVE

CLO

THIN

G


PROTECTIVE CLOTHING

PROTECTIVE CLOTHING

Freezer Coat and Trousers COAT Abrasi-Blast

Features : • Polyurethane coated nylon outer• High visibility panels on front and back torso and arms• Internal knit cuffs and gathered at waist• Utility pockets, upper chest pockets and arm pockets TROUSERS• Polyurethane coated polyester• Heavy duty channel quilted insulated trousers• Full length 2 way zip on side of legs with velcro storm placket to retain warmth and ease of dressing• 2 Large front angled patch pockets• Velcro fly opening• Elasticised and drawstring waist

Abrasi-Blast• Provides respiratory and upper body

protection for workers in shipbuild-ing, construction industry, utilities, and other applications where blasting with abbrasives is performed

• Made up of a hood, facepiece with lens housing, breathing tube, cover lens cartridge assembly, flow-control device, approved air-supply hose, and support belt.

• The lens is protected by 2 to 4 flat glass cover lenses mounted in a spe-cial foam material

• Approved by NIOSHOrder No. Type Description

MD0000285 763235 Freezer Coat and TrousersCOAT

PROTECTIVE CLOTHING Industrial Nomex IIIA Coverall

Metal Pro 700 Series Proximity Suit

Defender Fireman Clothing

Features : • Offers enhanced protection and resist-

ance against molten iron splashes • 20 to 50% lighter than typical flame-

retardant treated cotton fabrics• Consist of KEVLAR, P140 anti-static fibres,

natural and artificial fibres• It is lightweight, breathable, supple and

comfortable• EN373 standard

Features :• Made from Nomex IIIA• Nomex fiber is inherently heat,

flash, and flame resistant, doesn’t ignite or burn nor melt or drip and decomposes above 427°C (800°F), acts as a heat repellent barrier for insulating conductive heat transfer, keeps its characteristics from the first to last day of garments life

• Available in many colors and sizes• Recommended use area : petro-

leum industries, petrochemical industries, oil and gas fields, electricity and gas utilitiy workers, hazardous chemical operators, steel mills and steel re-rolling mills, gasoline dispenser workers and food industry

• Available in 4.5oz and 6oz

Features :• Made from nomexIIIA• Flame retardant suite• Composition from nomex, kevlar, and carbon• NFPA, CGSB and EN 469


D70000013 Industrial Nomex IIIA Coverall


D7Z000001 Metal Pro


D70000014 Defender Fireman Clothing


PR0000589 700 Series Proximity Suit

Features : • Short duration entry into oven

or other areas of high heat up to 300oF (149oC) ambient temperature

• Exposure to radiant heat up to 2000oF (1111oC)

• This suit is not for fire entry• Available complete with BA

accomodation

PRO

TECT

IVE

CLO

THIN

G

19


PROTECTIVE CLOTHINGFire Escape Hood

Aluminized Hood

Aluminized Sleeve

Aluminized Apron

Aluminized Apron with sleeve

Aluminized Coat

Aluminized Pants

Features : • Penetration (%) : <0.01• Leakage coefficient (%) : <5• Dapa (inhalation resistance) : 85ℓ/min • Total field of vision (%) : 80 • Binocular field of vision (%) : 60• Total weight (gR) : 80

Features : • Wide field of vision• Unique helmet providing complete

head protection• Excellent protection against radiant

heat, high ambient temperature

Features : • Length 22” for full arm• Protective from radiant heat

Features : • Material : fiber glass• Bid style, with neck straps and waist

drawstring for full body and chest protection against radiant heat.

• Chest width 27”• Length : 38”

Features : • With waist drawstring for full

upper and lower body• Protection against radiant heat• Chest width 27”• Length 49”

Features : • Bid style, with neck straps and waist

drawstring for full body and chest protection against radiant heat.

• Chest width 27”• Length : 38”

Features : • Protection against radiant heat

and high ambient temperatures• Waist circle 34”• Length 39”


KW1000410 KW10-410 Fire Escape Hood


KW1000350 KW10-350 Aluminized Sleeve


KW1000351 KW10-351 Aluminized Apron


KW1000352 KW10-352 Aluminized Apron with Sleeve


KW1000353 KW10-353 Aluminized Coat


KW1000354 KW10-354 Aluminized Pants


KW1000349 KW10-349 Aluminized Hood

PRO

TECT

IVE

CLO

THIN

G

SPECIAL

ORDER


PROTECTIVE CLOTHINGAluminized Glove

Features : • Fully aluminized, back, and back of

thumb, reflect the radiant heat• Kevlar fibre on palm for extra heat

protection • High heat resistance, good for molten metals

Aluminized Gaiter


KW1000357 KW10-357 Aluminized Gaiter

Features : • Fully aluminized, good for

molten metals• Protects lower leg and boots/

shoes from radiant heat• Elastic straps holds the shoes

securely• One size fits all, easy on and off

MD-41, MD-42 Workman harn vest QFLS STD• Economical• Abrasion-resistant, strong, anddurable webbing• Yellow polyester webbing for

high visibility• Web retainers collars to keep

excess webbing neat• East to don and adjust• Choice of qwik-fit™ or tongue-

buckle leg straps for easy adjustment

• Meet OSHA regulations, ANSI A.10,32 and ANSi Z359.1 and is certified to CSA Z259. 10-M90

Features : • Kevlar (60%) and Nomex (40%) blend-

ed webbing resist to chemicals, weld splatter and other heat application

• Vest style harness• High visibility webbing and constract-

ing kevlar structural stitching which allows for easier inspection

• Quick-fit leg straps for easy connection• ANSI A10.14 and OSHA

MD-230 and MD-159Workman energy absorbing lanyard• Tear-tape design to keep fall

arrest force below 900lbf• Choice of single or twin-leg

configuration• Choice of adjustable or tie-back

configuration• Meets ANSI Z359.1-1992 (1999),

ANSI A10.32, applicable OSHA regulation, and is certified to CSA Z259.11-05 E4

FALL PROTECTION

Thermatek Harness

Workman Harn Vest QFLS STD

Workman Harn Vest QFLS STD

Features : • Vest-style harness – a lightweight,

durable, abrasion-resistant harness• Lifeline with locking carabiner or

snaphook permits safety and ease of mind while working

• Rope grab is a lightweight and affordable fall arrest device.

• Roof anchors and woodscrews (on some kits) are disposable roof anchors constructed from heavy-gauge steel with a galvanized fin-ish. Each comes with 8 galvanized flathead woodscrews.

Roofers’ Kits


MD0000129 416067 Roofers’ Kits


MD0000043 10020062 Thermatek Harness

Order No Type Description

MD0000041 10072491 Workman Harn Vest QFLS STD

MD0000042 10072479 Workman Harn Vest QFLS STD


MD0000230 10072475 Double Workman Energy

MD0000159 10072474 Single Workman Energy

PRO

TECT

IVE

CLO

THIN

G A

ND

FALL

PRO

TECT

ION


KW1000355 KW10-355 Aluminized Glove

19


Features : • Multi-purpose full body harness• Cross-over design • Nylon webbing • D-rings on back, chest, and hip• Meets ANSI Z359.1, CSA certified, and

OSHA standard

Features : • Tear-tape design to keep fall arrest forces

below 900 lbs• Choice of single or twin-leg configurations

FALL PROTECTIONGravity Cross-Over Harness Workman Construction Harness


MD0000160 SSH80920000 Gravity Cross-Over HarnessOrder No. Type Description

MD0000287 10077571 Workman Construction Harness

Features : • A durable, engineered thermoplastic

housing to increase service life• Rugged, impact-absorbing protective

bumpers for added durability• A field-replaceable lifeline option

eliminates down time and reduces cost of ownership

• A lightweight design, starting at 3.5 pounds

• Available in lengths from 6’ to 12’ in 1’ increments

• A 400-pound working capacity.

Features : • Used for travel restriction

or work positioning• D-rings are available on the

back of the belt for travel restriction and on the hips for work positioning

Features : • Provide all necessary equip-

ment to allow a worker to safely evacuate an aerial bucket that has become inoperative

• The kit includes : a. #2 rope bag b. 10 ft Synthetic Ladder with

swivel snaphook c. Boom anchor strap d. Anthron device, carabiners, 75

ft (7/16”) rope

Features : • 3 Tripod kits and 2 folding

davit kits• Single part number for simpli-

fied ordering• Confined space kits with lynx

rescuer allow for non-entry rescue of a confined space entrant

• Tripod and davit kits allow for great portability

MD-92 Kit #1MD-93 Kit #2

Workman Personal Fall Limiter

Body Belt

Bucket Truck Evacuation Kits


MD0000092 10023966 Lynx Tripod Confined Space Entry Kit #1

MD0000093 10023967 Lynx Tripod Confined Space Entry Kit #2

Features : • Sked stretcher• Cordura backpack/towing

harness• Horizontal lift sling• Vertical lift sling• Tow strap• Removable webbing handles• The system ships at 19lb

(8,6kg)

SRSSK200 Sked Basic

Lynx Tripod Confined Space Entry Kits


MD0000085 SRSSK200 Sked Basic Rescue System


MD0000189 10093352 Workman Personal Fall Limiter


MD0000044 415276 Body Belt


MD0000251 SKITSMT001 Bucket Truck Evacuation Kits

FALL

PRO

TECT

ION


FALL PROTECTION

MD-45 Restrain Lanyards 6 Feet • Nylon rope, 6 feet length (1.83 m)• Two side with snaphooks• Meets ANSI and OSHA standards

MD-46 Restrain Lanyards 4 Feet • Webbing, 4 feet length (1.22 m)• Two side with snaphooks• Meets ANSI and OSHA standards• Fixed length

Lanyard4 FeetLanyard

6 Feet

Restrain Lanyards 6, 4 Feet


MD0000045 505166 Restrain Lanyards 6 Feet

MD0000046 SWL3268704LS Restrain Lanyards 4 Feet


KW1000043 KW10-43 Back Support (S)

KW1000044 KW10-44 Back Support (M)

KW1000045 KW10-45 Back Support (L)

KW1000403 KW10-403 Back Support (XL)


KW1000440 KW10-440 Safety Rope Lanyard


KW1000436 KW10-436 Shock Absorber Lanyard


KW1000437 KW10-437 Safety Belt

KW10-43 Back Support• Durable lightweight spandex, powerful

knit, woven elastic cinch strap• Fastens securely with hool-and-loop

fasteners• Spring steel stays bend with body for

optimal support of the spine• Good for lifting, bending and carrying• Size S, M and L

Features : • Belt : 50mm x 1.2M nylon belt• Rope : 14mm x 1.5M, 1x buckle, 1 x “d”

ring, 1 x adjusting loop, 1 x double-lock snap hook dia.16Mm, 1x rope hook bag, 1 x bundle of belt

KW10-436 Shock Absorber LanyardCould be attached with KW10-438 and KW10-439

KW10-440 LanyardCould be attached with KW10-438 and KW10-439

PROTECTIVE CLOTHINGBack Support Lanyard

Shock Absorber Lanyard

Safety Belt

FALL

PRO

TECT

ION

AN

DPR

OTE

CTIV

E CL

OTH

ING

19



KW1000475 KW10-475 Full Body Harness with Lanyard, Waist Belt, and Bag


KW1000438 KW10-438 Safety Harness w/ Lanyard


KW1000439 KW10-439 Safety Harness w/o Lanyard


KW1000476 Double Lanyard with Energy Absorber

Features :• Belt : 45mm nylon belt• Lanyard : dia. 14mm x 1.5M• 4 X buckle• 1 X dorsal “d” ring• 1 X double-lock snap hook• 1 X quick link• 4 X bundle of belt• Color : blue

Features :• Belt : 45 mm nylon belt• 6 X buckle• 3 X d ring• 1 X double-lock snap hook• 1 X quick link• 6 X bundle of belt• Color : red / black

KW10-476 Double Lanyard with Energy Absorber

NEW

PROTECTIVE CLOTHINGFull Body Harness with Lanyard, Waist Belt, and Bag

Safety Harness w/ Lanyard

Safety Harness w/o Lanyard

Double Lanyard with Energy Absorber

Features : • Lanyard : length 1.8m, with energy absorber, one carabiner, two hooks• Waist belt : two D-rings on the both sides of the belt to equipped with an

adjustable lanyard• Full body harness : one D-Ring on the back and two sides for users conven-

ience, include buckles for strap adjustment

NEW

PRO

TECT

IVE

CLO

THIN

G


Size Order No.36/3 KW100028037/4 KW100028138/5 KW100028239/6 KW1000283

40/6.5 KW1000284

GOLIATH 4”

GOLIATH Model 4” Model 6”Size Order No. Order No.38/5 KW1000117 KW100012439/6 KW1000118 KW1000125

40/6.5 KW1000119 KW100012641/7 KW1000120 KW100012742/8 KW1000121 KW100012843/9 KW1000122 KW1000129

44/10 KW1000123 KW1000130

HERCULES Model 4” Model 6”Size Order No. Order No.38/5 KW1000088 KW100009439/6 KW1000101 KW1000095

40/6.5 KW1000089 KW100010041/7 KW1000090 KW100009642/8 KW1000091 KW100009743/9 KW1000092 KW1000098

44/10 KW1000093 KW1000099

GOLIATH 6”

HERCULES 6”

Size Order No.38/5 KW100023239/6 KW1000233

40/6.5 KW100023441/7 KW100023542/8 KW100023643/9 KW1000237

44/10 KW1000238GLADIATOR

Standard Specifications :• Genuine leather • Light weight• Comfort and durable • Available in common size:• Poly urethane, thermoplastic poly

urethane double density• Meet to European and Indonesian

Standard

NEW

HELIOS

TOE CAPSIN JOULE

OIL RESISTANT

CHEMICALRESISTANT

ANTI-SLIPSOLE

APHRODITE

XENA

LADIES SAFETY SHOES

HERCULES 4”

EUROPEAN STANDARD EN345’S

7079 : 2009

HELIOS(without Rope)

Order No. SizeKW1000489 38/5 KW1000490 39/6KW1000491 40/6.5 KW1000492 41/7 KW1000493 42/8 KW1000494 43/9 KW1000495 44/10

KRONOS

KRONOS(without Rope)

Order No. SizeKW1000730 38/5 KW1000731 39/6KW1000732 40/6.5 KW1000733 41/7 KW1000734 42/8 KW1000735 43/9 KW1000736 44/10

NEW

FOOT PROTECTIONSafety Shoes

FOO

T PR

OTE

CTIO

N

Size Order No.36/3 KW100027437/4 KW100027538/5 KW100027639/6 KW1000277

40/6.5 KW1000278

TOE CAPSIN JOULE

OIL RESISTANT

ANTI-SLIPSOLE

19


KW10-592


KW1000592 KW10-592 Pandora Leather Safety Shoes 38/5


KW1000594 KW10-594 Pandora Leather Safety Shoes 40/6.55






SPECIAL

ORDER


KW1000584 KW10-584 Ernest Leather Safety Shoes 38/5


KW1000586 KW10-586 Ernest Leather Safety Shoes 40/6.5






KW10-584

VIKINGSize Order No.38/5 KW100013139/6 KW1000132

40/6.5 KW100013341/7 KW100013442/8 KW100013543/9 KW1000136

44/10 KW1000137

Features: • Waterproof• Sweat absorbing lining• Steel toe cap impact 200J• Slip resistant outsole design• Using in construction area

Size including: M (last length 25cm)L (last length 26cm)XL (last length 27cm) RUBBER BOOTS

Size Order No.M KW1000434L KW1000435

XL KW1000472

VIKING

RUBBER BOOTS PVC BOOTS

Features: • PVC material• PVC/nitrile sole• Chemical resist-

ance• Fuel oil resistance• Steel toe cap impact 200J• Slip resistance outsole design

TOE CAPSIN JOULE

OIL RESISTANT

ANTI-SLIPSOLE

TOE CAPSIN JOULE

OIL RESISTANT

ANTI-SLIPSOLE

NEWPVC BOOTS

Size Order No.36 **KW100057437 **KW100057538 **KW100057639 KW100057740 KW100057841 KW100057942 KW100058043 **KW100058144 **KW100058245 **KW1000583

NEW

APOLLO

APOLLO(without Rope)

Order No. SizeKW1000481 37/4 KW1000482 38/5 KW1000483 39/6 KW1000484 40/6.5 KW1000485 41/7 KW1000486 42/8 KW1000487 43/9KW1000488 44/10

FOO

T PR

OTE

CTIO

N

** indent base

PANDORA LEATHER

ERNEST LEATHER

FOOT PROTECTIONSafety Shoes

TOE CAPSIN JOULE

OIL RESISTANT

ANTI-SLIPSOLE


INSULATING EQUIPMENTInsulating Equipment

High Voltage Rubber Insulating Gloves

Insulating Glove

Insulating Boots

Insulating Mat

PR-666 YS112-01-07High voltage rubber insulating boots• Protection for electrical workers from

high electrical shock• Size : 27 (Japanese Size), • Proof test voltage until 30 kV/3min. with max. use 26500 V• ANSI/ASTM and JIS Standard

PR-657 YS126-05-03High voltage plastic ins jackets R2• Protection for electrical workers

from electrical shock• Size : L• Proof test voltage until 20 kV/3 min. with max. use 17000 V• ANSI/ASTM and JIS Standard

PR-656 YS242-01-01High voltage plastic insulating sheets• Portable protection device for electri-

cal workers from accidental contact with live electrical

conductors, apparatus, or circuit• Light weight and easy to use• Size : 600 X 1000• Proof test voltage until 30 kV/3min.

with max. use 26500 V• ANSI/ASTM and JIS standard

PR-655 YS206-01-02High voltage rubber insulating blankets• Portable protection device for electrical

workers from accidental contact with live electrical conductors or apparatus

• Size : 750 X 1000• Proof test voltage until 20 kV/1min.

with max. use 7000 V• ANSI/ASTM and JIS Standard

PR-652 YS101-32-03High Voltage Rubber Insulating Gloves• Protection for electrical workers

from high electrical shock• Length : 455 mm, Size : L• Proof test voltage until 30 kV/3

min. with max. use 26500 V• ANSI/ASTM and JIS Standard


KW1000699 KW10-699 Insulating Glove Class 0(1.000 Volt)





KW1000703 KW10-703 Insulating Boot Class 3(26.500 Volt)


KW1000704 KW10-704 Insulating Mat (30.000 Volt)

Features :• Dipped – Natural Latex

Material• Rolled Edge Style• Comply with six class

(Class 00,0,1,2,3,4)• Meets International

Standard (ANSI)

Features :• High quality rubber material• Design for high voltage environment• Anti Slip sole pattern

Features :• High quality rubber material• Flexible and anti slip design• Good Electrical Insulation

Benefit :• Protect workers from

electric shock caused by touching energized object

Benefit :• Suitable for live – work,

provide insulation for protecting feet from

electric shock

Benefit :• Can be mainly used as ground

insulation


PR0000655 YS206-01-02 High Voltage Rubber Insulating Blankets

PR0000656 YS242-01-01 High Voltage Plastic Insulating Sheets

PR0000666 YS112-01-07 High Voltage Rubber Insulating Boots

PR0000657 YS126-05-03 High Voltage Plastic Ins Jackets R2


PR0000652 YS101-32-03 High Voltage Rubber Insulating Gloves

Low Voltage Rubber Insulating Gloves

PR-654 YS102-13-03Low voltage rubber insulating gloves • Protection for electrical workers from low electrical shock• Length : 270 mm, size : L• Proof test voltage until 5 kV/3 min. with• Max. use 1000 V• ANSI/ASTM and JIS standard


PR0000654 YS102-13-03 Low Voltage Rubber Insulating Gloves

INSU

LATI

NG

EQ

UIP

MEN

T

19


Features :• Ready to plug in and come with a cable, plug and start/stop switch• Ideal for small application or occasional filling operations• 1 filling hose with filling valve and pressure gauge • 200/300 bar switch over device• Capacity : 100 litre/minute• Max. pressure : 330 bar

Features :• Single line technology delivers medium

and high pressure using just one hose• Long strap for one or two cylinders, rub-

ber cylinder retainer and devider keep cylinders in place

• Air go backplate is ergonomically de-signed to keep weight close to the body’s centre of gravity

• EN 137:2006 standard• Include full face mask, demand regula-

tor, carbon composite cyl. 6.8 L, 300 bar, and carrying case

Features :• 5 or 10 minutes duration• Deliver a consistent air supply at 40lpm

(liters per minute)• Lightweight aluminium cylinders can

withstand exposure to temperatures from 0° to 160°F

• Custom air V escape respirator available

Features :• A reliable economy model breathing apparatus to

suit fire fighting and industry applications• Designed for work and rescue, suitable for asia

people and comfortable• Configuration solid and simple nylon back plate,

certificate GA 124-2004• Applications : chemical,fire fighting, foundries and

metal production,mining,oil, and gas. Etc• Include full face mask, demand regulator, carbon composite cyl. 6.8L, 300 bar, and carrying case

Features :• Extremely simple to use• Sensitive, electronic motion sensor recognize all

normal body movements • Maintenance free and durable • Can be activated manually• Suitable for fire and rescue operations, tunnel

surveying and many more industrial applications

Features :• Specifically designed for emergency response

and escape• The demand valve is directly attached to the

pressure reducer, allowing quick donning • High quality materials for maximum safety and

durability• EN 137:2006 [2] approved for all applications

Features :• Rugged shock resistant gauge• Ergonomic AirXpress carrier made with glass

fibre reinforced polyamid to withstand high heat and flames

• Comes with 300 bar composite compressed air cylinders and 3S-PS full face mask

• EN137:2006 [2] approved for all applications

BREATHING SYSTEM AND SPECIAL SAFETY APPLICATION100 EFI Portable Breathing Compressor BD 2100 SCBA

Motion Scout KT-Series

AirGo Compact SCBA Complete W/3S-PS

AirXpress Industrial SCBA Complete Set

Air Go Pro

Transaire 5 and Transaire 10

Evolution 5200 Thermal Imaging Camera


MD0000267 100 EFI Portable Breathing Compressor


MD0000154 BD2100 BD 2100 SCBA


MD0000278 10088034 Motion Scout KT-Series


MD0000272 BOM-AGC-P-010001 AirGo compact SCBA complete w/3s-ps


MD0000378 SCBA AirXpress Industrial SCBA Complete Set


MD0000163 SCBA Air Go Pro


MD0000248 10008293 Transaire 5 and Transaire 10


MD0000059 10063768 Evolution 5200 Thermal Imaging Camera

MD-59 Evolution 5200 Thermal Imaging Camera• High performance safety : 320ºF high sense mode range gives high image definition • Over the widest temperature range of any fire

service TIC.• Twice the low sensitivity in the 320º to 1000ºF

range • 3.5” display• Range matches 80% of the temperature range in most structural fires.• Low cost - high value• Heat seeker plus color detail• Can be connected with evolution 5000 series

video capture system to record in video format for documentation and training purposes.

BREA

THIN

G S

YSTE

M A

ND

SPE

CIA

LSA

FETY

APP

LICA

TIO

N


MD-290 92760 Portable Air Filter and Regulator• This system conteins an

airline filter, pressure regulator, and a 4-outlet manifold in a lightweight aluminium case

• For use with inlet pressure up to 125psig, the outlet pressure is adjustable from 10 - 125psig

• The manifold comes with snap-tite (AL) quick

disconnect

Air Line Respirator Hose• 3/8” ID air supply hose

is available in smooth, reinforced, lightweight polyvinylchloride (PVC) and chemical re-sistant black neoprene material

• Available size 50ft or 100ft

• Quick disconnect are sold speretely

466095 Duo-Flo Respirator Airline

• The duo-flo respirator comes in a constant-flow version

• Constant-flow respirator are normally used where an ample air is available such as that provided by an air compressor

• Duo-flo respirator use the ultra filter P100 clasification

• Duo-flo respirator are popular in the pharmaceutical, chemical,

petrochemical and nuclear industry

10054784 PremeAire Cadet Supplied-Air Respirator• The premeaire cadet respirator

is a pressure-demand, type-c, suppled-air respirator with a mask mounted regulator that respons quickly to wearer’s changing breathing requirements

• Designed for a variety of applica-tion can be used in non IDHL (immediately dangerous to life or health) environments

• Operation inlet pressure is 60-100psig. NIOSH approved

PremeAire Cadet Escape Respirator

• New one piece first stage regulator and cylinder valve

• Regulator body protects cylinder gauge

• Choice of cylinder hip placement allows workers freedom and versatility

• Escape cylinder duration 5,10 or 15 minutes

• Applications : chemical and petrochemical, hazzardous material, confined space entry and firefighting operations

BREATHING SYSTEM AND SPECIAL SAFETY APPLICATION

GAS DETECTOR

92760 Portable Air Filter and Regulator

Multi Gas Detector

Fixed Gas Detector

Single Gas Detector


MD0000382 Altair 4X Multi Gas Detector

MD0000172 Sirius Multi Gas Detector


MD0000137 89220 Explosimeter Combustible Gas Indicator

MD0000070 10074137 Altair Pro Single-Gas Detector

MD0000117 10070749 Altair Gas Detector

MD-172Sirius multi gas detector• Simulaneously detects O2, CO,

H2S, combustible gas, and hundreds of VOCs.• Superior, proprietary PID sensor design• Rechargeable or alkaline battery option• User-friendly software• Loud, attention-grabbing double-alarm system

MD-382Altair 4x multi gas detector• Sensor Available : O2, CO, H2S,

and combustible gas• The MotionAlert sensor activates

when a user becomes disabled and motionless

• Full three year warranty supports the entire instrument, including the sensors and battery

• Passes 20-foot drop test with IP67-rated

• Ideal for confined space, mining, oil, gas and petrochemical

Ultima X Series Monitor• Continuous monitoring of com-

bustible gases, toxic gases and oxygen deficiency

• Feature interchangeable smart sensors, an LCD display with scroll-ing text message

• On board relays• 4-20 mA or stand alone• Extremely fast response time over

extended temperatures• Infrared point gas detector

MD-137 Explosimeter Combustible Gas Indicator

• Detects and measures concentrations of combustible gases or vapours in the air

• Can draw samples from remote areas• Cast aluminium casing• UL approved for Class I, Group D, Divisions

1 and 2; and Class 1, Groups A, B and C, Division 2 (Division 1 excluded), hazard-ous atmosphere

MD-70Altair pro single-gas detector• Available sensors : CO, H2S, O2, HCN, CL2, CLO2, SO2, NO2, NH3, and PH3• Ease-of-use (1-button operation)• Alarm check, bump check, fresh air zero, and calibration made easy• Replaceable sensors• Built-in IR communication (event and data-logging)• Rugged design• Water-and dust-resistance

MD-117 Altair gas detector• Sensors available : CO, H2S and 02• Maintenance-free• One-button calibration• Triple alarm system• Unreplaceable sensors• IP 67 rating (water and dust resistance)• Solid-state and rugged case design

BREA

THIN

G S

YSTE

M, S

PECI

AL

SAFE

TY

APP

LICA

TIO

N A

ND

GA

S D

ETEC

TOR

19


GAS DETECTOR

SIGN AND LABEL MAKER

Multi Gas Detector

Bmp21 Unit Label Printer MARKWARE™ Facility Identification Software

Features :• Use your PC to quickly design profes-

sional looking signs and labels• Print directly to a Brady labeling sys-

tem or most windows inkjet/laser printers

• Over 1,000 safety symbols and indus-trial pictograms included

• 2,000 chemical database for creating

OSHA Right-to-knows labels• Import logos, photos and other

graphics in 9 different file formats• Create bar codes using 15 different

symbologies• Complete drawing toolkit (hot shapes,

fill patterns, freeform lines, etc.)• User interface can be displayed in 12

languages, including Spanish• Compatible with any of these any

Brady printers

DAT

ACO

MM

ELEC

TRIC

AL

BMP21 Applications

Features :• 6 font sizes, 80 different symbols and multiple print• Barcoding and automated serialization• Easy to load cartridges and easy to read• Built in touch cell in labels and ribbon allows printer to

automatically format label• Print and cut technology• Store, retrieve and delete label files• Power source : 6 AA batteries• Applicantion : General ID, electrical and datacomm

MD-228 Altair 5 Multigas Detector• Buttons on instrument must easy

to operate with gloves on• Instrument shall be designed to

protect against accidental shutoff• Instrument shall provide fresh

air setup [FAS] function at user’s discretion

• FAS function will not allow unit to zero out hazardous readings

Gas type RangeCombustible 0-100% LELOxygen 0-25% VolCarbon monoxide 0-999 ppmHydrogen sulfide 0-200 ppmSulfur dioxide 0-20 ppmChlorine 0-20 ppmAmmonia 0-50 ppmNitrogen dioxide 0-50 ppmChlorine dioxide 0-1 ppmPhosphine 0-5 ppmHydrogen cyanide 0-30 ppm

Sensor typesInstrument shall be available with the following gas sensing options:

Altair 5X Multigas Detector• Sensor response, clear times,

and bump test in under 15 seconds

• Greater signal stability and repeatability under extreme environmental conditions

• Three year back to back instru-ment warranty includes CO/H2S/O2/LEL/SO2 and IR sensors


MD0000228 Altairs 5 Multigas Detector


B10001573 BMP21 Unit label printer


B10000224 20700 Facility Identification Software

GA

S D

ETEC

TOR,

SIG

N A

ND

LABE

L M

AKE

R


GLOBAL MARK - Industrial Label Maker• Color touch screen interface... quick and easy!• Multicolor spot printing or full- color process printing• New materials including tag stock, magnetic and static cling!• Cut characters and shapes!• Tape sizes 1/2”, 11/8, 21/4”, 3” and 4”• 290 built-in symbols • Hundred of built-in templates in 6 industrial applications• Available 3 types: monocolor, multicolor, and color and cut

• Indoor/Outdoor Grade Vynil Tape

• Industrial Grade Print Ribbon

Equipment I.D. Process Color Printing Pipe Maker

Magnetic Tape Glow in the Dark Tape

Globalmark Applications

Features :• Portable, industrial, prints 1.5” per second• QWERTY style keypad layout with sleep mode when not in use• Large, graphical, full color display with on screen indicators• Rechargeable battery• Wide variety of label materials up to 2” wide label tape• Other features include: 100’s symbols, reverse print, multiple font size, frame, barcodes, italic/bold, auto font size, vertical, sequences, time/date stamps, etc. • Application : electrical, contractors, maintnance, safety, warehousing, etc.

FLOOR LABELING

LABEL WITHSTAND HIGH TEMPERATURES FLAGS/FIBEROPTIC LABEL

GLOW IN THE DARK

CREATE TAGS WITH BARCODE CONTROL PANEL LABEL

Features :• Prints labels from ½” to 4” wide• 192 built in graphics, with quick

import options for graphics and fonts

• Hundreds of material options • Large touch screen display with

touch and drag moving and sizing• Full size fold down keyboard• Stand alone or PC-connect operation• Complete with power cord, USB

cable, drivers CD, stylus, cleaning kit, cutter cleaning tool, quick start guide, and documentation holder

SIGN AND LABEL MAKERBMP71 Label Printer Unit

BBP31 Sign and Label Printer

GLOBAL MARK - Industrial Label Maker


B10001694 115157 BMP71 Label Printer Unit


B10001793 142052 BBP31 Sign and Label Printer


B10000186 76801 Multi Color and Cut

B10000223 76800 Multi Color

SIG

N A

ND

LA

BEL

MA

KER

19


”Glow - in - the - Dark” Exit and Directional Sign• Immedietely visible in emergency situations, absorbs and stores energy from ambient light• Illuminatioan is a consistent , highly visible cue identifying exits • UL approved for use with flourscent, mercury vapor and metal halide light sources• Helps poeple evacuate quickly and saftly, perfect for high and low level application• 10+ hour glow life, made from material B-324 printed polyester or B-347 printed

vinyl film on plastic signs

B1-1092 B-324 5” x 14”- 90589 B-347 5” x 14”- 90787

B-324 5” x 14”- 90590B-347 5” x 14”- 90788

B1-367 B-324 5” x 14”- 90591 B-347 5” x 14”- 90789

B1-370 B-324 5” x 14”- 90594 B-347 5” x 14”- 90922

B1-368 B-324 5” x 14”- 90592 B-347 5” x 14”- 90920

B1-369 B-324 5” x 14”- 90593 B-347 5” x 14”- 90921

SIGN AND LABEL MAKER

GLOW IN THE DARK EXIT SIGN

POWER MARK - Sign and Label Maker

Glow in the Dark” Exit and Directional Sign

Safety Sign “Fire Extinguisher”

Big Beam CombinationEmergency Lighting

Emergency Evacuation Insert Frames

Big Beam Emergency Lighting

Features :• Multicolor print• 4”, 6”, 7”, 8” and 10” tape width• Internal and external file storage• Large, pivoting screen• Over 300 built-in symbols• 3 bar code symbologies built-in: 3 of 9, 128 and 2 of 5• 11 international operating languages

• Indoor/Outdoor Grade Vynil Tape

• Industrial Grade Print Ribbon

Traffic Sign Multi Color Sign Glow in The Dark Sign

Pipe Maker Add Header, Text and Picto


B10000019 13500 POWER MARK - Sign and Label Maker


B10000192 94008 Safety Sign “Fire Extinguisher” Order No. Type Description

B10001489 102853 Emergency Evacuation Insert Frames


B10001464 80142 Big Beam Emergency Lighting


B10001537 80139 Big Beam Combination Emergency Lighting

Features :• Designed for safety instructions and egress

during power outages and emergency situations• Exceed ASTM E 2072-00• Choose from 20 stock safety legends• Sign size : 12” x 9”

Features :• Rectangular lights are Par - 36 sealed

beams 6W HIT lamps with plastic holder• Dual voltage transformer for 120/277

VAC operatioan• UL listed

Features :• Attractive, clear acrylic frames for

evacuation maps• Non-glare, scratch resistant finish,

2 adhesive strips on back for easy installation

• Size 171/2” x 15” Luminous

Features :• Round lights are halogen 12W Par-36 sealed

beams - Chicago code approved to remain lit for a minimum of 2 hours during an emergency

• Dual voltage transformer for 120/277 VAC operatioan

• UL listed

GLO

W IN

TH

E D

ARK

EXI

T SI

GN

AN

D L

ABE

L M

AKE

R


“Glow - in - the - Dark” Stripes and Solid Tape• Made of B-324 phosphorescent• Standard package: one 5 yd. roll• Stripes : B1-1009 76430 (2”), B1-1509 76431 (3”)• Solid : B1-1544 76432 (2”), B1-1465 76433 (3”)

Features :• High visibility green• No electric requirement• Size : 8.25” x 15.25”x 0.25”• Black, green, red, and white background• Life expectancy 25+ years• Non-toxic, non-radioactive• Meets standards of NFPA, ASTM, DIN, OSHA

Features :• Used at standpipes, hose cabinets, wall

projections and restricted areas• Install easily• Flexible design• 100% recylable• Non-toxic, non-radioactive• The glow duration up to 10 hours

Features :• Cost effective to purchase and install• Easy to clean• Made from B-916 grit-coated polyester tape

Features :• Made of B-523 phosphorescent• BradyGlo™ 10 hours material

exceeds ASTM E 2072-00 standard• Excellent durability because they

are placed out of the main foot-traffic area

• Easy-to-install, self-sticking L’s bond to smooth, clean and dry surfaces

Features :• Made of B-523 phosphorescent• BradyGlo™ 10 hours material exceeds ASTM E 2072-00 standard• Safely indentify door handles for quick

evacuation• 4-1/8” x 4-1/8” markers sold 5 pack

Features : • Made of B-324 phosphorescent• BradyGlo™ 10 hours material

exceeds ASTM E 2072-00 standard• Two sizes available: 2” and 3”• Two directional graphic styles

available: V and Arrow• Standard package one 5yd. roll

Features :• Made of B-523• Self sticking adhesive• Astme 2072-00 standard• Available size - B1-1373 ( 2,5Cm X 15.2M ) / roll - B1-1246 ( 2,5Cm X 76.2M ) / roll

L-Shaped Stair marker

GLOW IN THE DARK EXIT SIGNGlow in The Dark Anti-Skid Tape Glow in The Dark High Intensity Hazard Tape

Glow in The Dark Arrow Tapes

Glow in The Dark Door Hadware Markers

Glow in The Dark L-Shaped Stair Markers

Glow in the Dark Stripes and Solid Tape

Glow in The Dark Framed Exit Signs

High Intensity Tape


B10001037 99049 “Glow - in - The - Dark” Anti-Skid Tape


B10001008 90974 “Glow - in - The - Dark” Arrow Tapes (3”)

B10001057 90973 “Glow - in - The - Dark” Arrow Tapes (2”)


B10001245 81870 ”Glow - in - The - Dark” High Intensity Hazard Tape


B10001372 81853 “Glow - in - The - Dark” Door Hadware Markers”


B10001371 81736 “Glow-in - The - Dark” L-Shaped Stair Markers”


B10001539 90842B Glow in The Dark Framed Exit Signs


B10001373 81873 High Intensity Tape

• Non-toxic, non-radioactive• Size 2”x 60ft

GLO

W IN

TH

E D

ARK

EXI

T SI

GN

19


Features :• Oversized 480/600V frame lockout

fits breaker switches up to 2 1/4” wide and 7/8“ thick

• Made of durable polypropylene and glass filled-impact modified nylon

• New blade design gets better grip, works on even more breaker models

• Patent #5.500.495

Features : • Revolutionary new cable lockout

perfect for use on disconnect switches, small gate valves, etc.

• Body made of impact modified nylon• Superior chemical, corrosion and temperature resistant properties• Body dimensions: 4” diameter x 13/4” deep• Cable dimensions: 1/16” diameter x 8’ length• 6 lock holes accommodate most pad-

lock shackle and hasps

Features :• Guard against unauthorized operation or accidental ativation• Two sizes to accomodate standard NEMA 30.5

mm and IEC 20.5 buttons• Permanently install over push/pull or twist-

release emergancy stops• Durable metal bar locks button in the depressed (off) position

B1-1257NEMA 30.5

Features :• All the basics for locking out

breakers, electrical plugs, wall switches, and fuses

• Include mini cable lockout• Complete with component

B1-1455IEC 20.5

B1-135565501

Self-LaminatingPhoto Tag

B1-132450263

Heavy DutyPolyester Tag

B1-14965534


Label and Tags• Tags meet OSHA standard 1910.145 for

accident prevention • Available in three durable material to

meet every application and buget• Made from material heavy duty polyester,

economy polyester and cardstock• Size 51/2 x 3”

B1-14865523


Self-Laminating Tags can be personalized by writing on special instructions, hazards or warnings. Then protect and seal your message with a clear adhesive overlay.

Peel away liner

Features :• Guard against

unauthorized operation or accidental ativation.

• Two sizes to accomodate standard NEMA 30.5 mm and IEC 20.5 buttons

• Clear lexan cover with hinged door completely covers button, preventing access

B1-1259IEC 20.5

B1-1258NEMA 30.5

Features :• Perfect for locking out oversized and irregularly shaped switches• Self-adhesive backed rails permanently installed into an electrical panel-simply clean panel surface and adhere-no drilling required• Blocking bars (red and green) are 71/2” long• Red blocking bar indicates locked off, green bar indicates locked on

LOCKOUT TAGOUTOversize Breaker Lockout

Mini Cable Lockout

Emergancy Stop Lockout Safety Covers

Electrical Lockout Toolbox

Label and Tags

Push Button Lockouts Safety Covers

480-600V Breaker Blocker Kit


B10000392 65329 Oversize Breaker Lockout


B10001472 50940 Mini Cable Lockout


B10001355 65501 Self-Laminating Photo Tag

B10001324 50263 Heavy Duty Polyester Tag

B10000149 65534 Heavy Dutyn Polyester Tag

B10000148 65523 Heavy Duty Polyester Tag


B10001257 104600 NEMA 30.5 Emergancy Stop Lockout Safety Covers

B10001455 104601 IEC 20.5 Emergancy Stop Lockout Safety Covers


B10001258 104602 Nema 30.5 Push Button Lockouts Safety Covers

B10001259 104603 Iec 20.5 Push Button Lockouts Safety Covers


B10000364 90891 480-600V Breaker Blocker Kit


B10000968 99313 Electrical Lockout Toolbox w/ Lock

B10001154 99310 Electrical Lockout Toolbox no Lock

LOCK

OU

T TA

GO

UT


Features :• Extremely versatile - works on wide

range of single-pole and internal-trip multi-pole breakers

• Two size, one for 120/277V breakers and one for 480/600V breakers

• Use thumbscrew to clamp lockout securely onto switch tongue, then pull cover over thumbscrew and lock in place to prevent clamp from being loosened

Features :• Use in conjunction with clamp-

on breaker lockouts• Easily clips onto the bottom of

the lockout body • Assures positive restraint for

breakers with long, sliding switch throws

• Standard package 6 cleats

Features :• Single device works with most major multi-pole breakers thet employ a tie-bar • Compatible with GE, ITE, sylvania, challenger,

bryant, westinghouse, general switch, and more • Use thumbscrew to clamp lockout securely over

tie bar, then insert lock to prevent clamp from being loosened

• Standard package 6 per pack or 1 per pack

Features :• Designed for 120V breakers

that have holes in the switch tongue

• Quick and easy - just snap in place and apply lock

• Dual cavities accommodate different size switch tongue

• Accepts lock shackles up to 9/32” in diameter

• Standard package 6 per pack or 1 per pack

Features :• A safe and effective method for locking out

miniature circuit breakers• Commonly used in European and Asian

equipment• NO TOOLS to install• Availble for single and multi-pole breakers• Made from glass-filled nylon• Standard package 6 per pkg

B1-515 Pin Out StdB1-1105 Pin In StdB1-157 Pin Out Wide

Features :• PLug lockout prevent electrical plug

from being inserted into a wall out-let. Use when plug will not remain under exlusive control of the persen performing serive or maintanance

• Made of rugged polypropylene• Small plug lockout 2”H x 2”D x 31/2”

W with 1/2” diameter hole for cable• Large plug lockout 31/4”H x 31/4”D x

7” W with 1” diameter hole for cable

Features :• Accommodates high and low voltage

plug up to 3” in diameter and 51/2” in length

• 2 sliding top lids can be used indi-vidually or togather to accommodate small, medium and large diameter cords up to 11/4”

• Made of bright yellow thermoplastic

Features :• Prevent access to the main

cylinder valve• No need to match your lockout

device to verying diameters and threads of cylinder caps

• Accommodate neck rings up to 31/2” diameter

• Install in seconds to save time

LOCKOUT TAGOUTClamp on Breaker Lockout

Cleats for Clamp on Breake Lockouts

Cleats for Clamp on Breake Lockouts

120V Snap-On Breaker Lockout

Miniature Circuit Breaker Lockout

Prinzing 3-In-1 Plug Lockout

Brady Plug Lockouts

LM023E Prinzing Gas Cylinder Lockouts


B10000059 65397 Clamp On Breaker Lockout 480/600v

B10000024 65396 Clamp On Breaker Lockout 120/277v Order No. Type Description

B10000489 90853 Miniature Circuit Breaker Lockout

B10000515 90845 Miniature Circuit Breaker Lockout Pin Out Std

B10001105 90848 Miniature Circuit Breaker Lockout Pin In Std

B10000157 90851 Miniature Circuit Breaker Lockout Pin Out Wide


B10001487 45842 PL023 Prinzing 3-In-1 Plug Lockout


B10000119 65674 Brady Plug Lockouts Small

B10000120 65675 Brady Plug Lockouts Large


B10001181 LM023E Prinzing Gas Cylinder Lockouts


B10000619 65406 Cleats For Clamp on Breake Lockouts 480/600v

B10000618 65404 Cleats For Clamp on Breake Lockouts 120/277v


B10000201 66321 Universal Multipole Breaker Lockout 1 Per Package

B10000171 66320 Universal Multipole Breaker Lockout 6 Per Package


B10000200 65387 120v Snap-On Breaker Lockout 1 Per Package

B10000061 65688 120v Snap-On Breaker Lockout 6 Per Package

LOCK

OU

T TA

GO

UT

19


Features :• Fits various shapped ball valve handles, as well as

block, stop, butterfly and T-handle valves• Made od durable super-tough nylon and steel

materials• Valve handle max. : - Thickness 3/4” to 11/4” - Width 1 to 15/8”

Features :• Best available method for locking

out ball valves• Simple one piece design makes it

easy to use• Assists in compliance with OSHA’s

lockout standard• Valve size: 1/4” to 3”• Patented design fits all major

brand ball valves

Features :• Versatile lockout adjusts to fit 1”

to 61/2” valve handles, replacing 3 conventional gate valve lockout

• Durable polypropylene is resistant to extreme temperature changes from - 50oF to 360oF

• Compact for easy carrying and storage

Safety Lockout Hasps and Labeled Lockout Hasps • Allow up to six workers to lock out a single energy source• Available diameter jaw 1” and 11/2” (safety lockout)• Labeled lockout hasp is a combination lockout tag and safety lockout• Made from 5052 anodized aluminium alloy

Gate Valve Lockout • Make locking out valve safe and easy• Made of durable, non-adherent plastic

to resist chemicals and hot and cold temperatures

• Service temperatures -20oF to 300oF• Available in five sizes to fit valve handle

from 1” to 13”

Features :• Body made of impact modified nylon• Available in red, blue, yellow or green• Comes with 6ft galvanized steel cable,

1/8” diameter• Patent no 5.823.020

Features :• Compact, lightweight body made of

rugged isoplast• Superior chemical, corrosion and

temperature resistance properties• Built-in cable loop keeps cable neatly

coiled when stored, also keeps extra cable from dangling loose and posing a hazard when in use

Features : • Versatile, rugged, easy to use, lightweight• Made of industrial-grade steel and nylon for extra

impact and chemical resistance• New open-ended clamp fits over closed rings, with handles• Can also be used to lock out large levels, T-handles

and other hard to secure mechanical devices• Cable attachment offers choice of 1/8” non

conductive nylon or rustproof sheathed metal cable

LOCKOUT TAGOUTLarge Universal Ball Valve Lockout Device (1.1/4-3”)

Ball Valve Lockout Device

Gate Valve Lockout

Adjustable Gate Valve Lockout (1-6.5”)

Safety Lockout Hasps and Labeled Lockout Hasps

Original Cable Lockout

All Purpose Cable Lockout

Universal Valve Lockout


B10001030 51392 Large universal ball valve lockout device (1.1/4-3”)


B10000321 65318 Original Cable Lockout


B10001210 50943 All Purpose Cable Lockout


B10001208 50899 Universal Valve Lockout


B10000025 65666 Ball Valve Lockout Device


B10001043 64058 Adjustable Gate Valve Lockout (1-6.5”)

Order No. Type DescriptionB10000035 65562 Red (5-6.1/2”) Gate Valve Lockout B10000036 65563 Red (6.1/2-10”) Gate Valve LockoutB10000288 65592 Yellow (5”-6.1/2”) Gate Valve LockoutB10000385 65598 Green (6.5”-10”) Gate Valve LockoutB10000386 65564 Red (10”-13”) Gate Valve LockoutB10000387 65599 Green (10”-13”) Gate Valve Lockout

Order No. Type DescriptionB10000040 65375 Lockout hasp 1” JawB10000038 65376 Lockout hasp 1.5” JawB10000030 65960 Red Safety Lockout Hasps and Labeled Lockout HaspsB10000032 65963 Green Safety Lockout Hasps and Labeled Lockout HaspsB10001381 65961 Silver Safety Lockout Hasps and Labeled Lockout HaspsB10000033 65964 Gold Safety Lockout Hasps and Labeled Lockout HaspsB10000031 65962 Blue Safety Lockout Hasps and Labeled Lockout HaspsB10000046 65967 Mixed Safety Lockout Hasps and Labeled Lockout Hasps

LOCK

OU

T TA

GO

UT


Features :• Non-sparking, Aluminium small lockouts

are a great additioanl to your tool box• Lightweight-only 1 1/2 ounces• Maximum 3/8” shackle diameter• Available in 1” and 1 1/2” diameter

Features :• Dimensions 30” x 25” x 51/4”• Provides everything you need for locking out all

types of valves and plugs• Constructed of sturdy white polystyrene with

pre-drilled holles for easy wall mounting• Pegboard-style holes for hooks drilled into back

(8 hooks supplied standard)• Complete with component

Features :• Board made of 3/16” thick yellow acrylic with

acrylic lock rails• Tag pockets made of clear polycarbonate, hold

tags up to 3” wide

A. B1-1013 5-Lock Board Includes 5 padlocks B. B1-544 10-Lock Board Includes 10 padlocks C. B1-1319 20-Lock Board Includes 20 padlocks D. B1-546 36-Lock Board Includes 36 padlocks

AB

C D

Features :• Holds up to 10 padlocks, 6 hasps and 10 tags• Made of thermformed polypropylene for

rugged durability• Semi-transparent hinged cover with

locking mechanism• Slots in back for wall mounting• Attachable carrying handle facilitates easy portability

Features :• Reinforced laminated steel with stands severe physical abuse• Hardened steel shackle difficult to cut• Body plates individually coated for superior rust protection• 5 pin cylinder offers more unique key cuts, better tamper resistance than conventional 4-pin locks• Two shackle size 3/4” or 2”, shackle diameter: 17/64”• Lock body: 11/3” x 19/16“ x 7/8“• Locks come keyed different. Custom keying and charting also available• Two key supplied with each padlock

B1-537 Safety Padlock (Red) • Compact and lightweight• Enhanced impact resistance• Superior temperature, chemical, and corrosion resistance• Non conductive, non sparking body• Available in 6 high-visibility colors• Shackle clearance: 11/2”, shackle diameter: 1/4”• Lock body: 13/4” x 11/2“ x 4/5“• Locks come keyed different. Custom keying and charting also available• Two key supplied with each padlock• Ribbed design for easier gripping and handling

B1-572 BlueB1-965 YellowB1-966 GreenB1-967 BlueB1-109 Orange

Features :• Used to lockout cylinder tanks, including

propane tanks on fork trucks and stand alone propane tanks

• Apply with ease to prevent access to the valve handle

• Designed to fit in tight spaces• Valve stem hole is 1.25” in diameter• Made uf rugged polystyrene plastic

Features :• Designed to fit most North American high

and low pressure gas cylinder• Snap Cap cylinder safety device meets DOT

standards• The Snap Cap denies access to the main

cylinder control and regulator attachment• Welded steel construction and powder

coated to many years of use

LOCKOUT TAGOUTAluminium Economy Hasps 11/2” Diameter

Extra Large Enclosed Lockout Station

Lock Boards

Padlock Station with 10 Safety Padlock

Steel Padlock

Safety Padlock (Red)

Cylinder Tank Lockout

Snap CapTM Gas Cylinder Lockout


B10001434 105721 Aluminium Economy hasps 11/2” Diameter

B10001505 105720 Aluminium Economy hasps 1” Diamater Order No. Type DescriptionB10000571 99504 Steel Padlock Blue (3/4”)B10000977 99500 Steel Padlock Red (3/4”)B10000978 99524 Steel Padlock Red (2”)B10001211 99543 Steel Padlock Orange (2”)

Order No. Type DescriptionB10000537 51339 Safety Padlock RedB10000572 51344 Safety Padlock BlueB10000965 99570 Safety Padlock YellowB10000966 99564 Safety Padlock GreenB10000967 99556 Safety Padlock BlueB10000109 99576 Safety Padlock Orange


B10001311 99696 Extra Large Enclosed Lockout Station


B10001443 105930 Padlock Station with 10 Safety Padlock

Order No. Type DescriptionB10000578 SD02M Cylinder Tank Lockout

Order No. Type DescriptionB10001032 95130 Snap CapTM Gas Cylinder Lockout

Order No. Type DescriptionB10001013 51181 5-Lock Board Includes 5 PadlocksB10000544 51188 10-Lock Board Includes 10 PadlocksB10001319 51189 20-Lock Board Includes 20 PadlocksB10000546 51196 36-Lock Board Includes 36 Padlocks

LOCK

OU

T TA

GO

UT

19


PL-164 2600 Headsup Lite™• Water resistant• 25 lumen value• 4AA alkaline batteries

(included)• Explosion proof

PL-530 2680 Headsup Lite Recoil LED• 4 AA alkaline (Included)• 73 lumen value• Headsup lite with recoil LED module• It’s powerful, durable, and efficient• Corrosion proof, water resistant, and indestructible• Explosion proof

Features :• Unbreakable ABS body

with polycarbonate lens• 33 lumen value• 3C alkaline batteries• Explosion proof

Features :• Tested lumen value 65• Twist on/off shroud• White collimated beam as bright as

an incandesecent light• Rugged, light weight Xenoy® body• Explosion proof

Features :• 28 lumen value, nicad battery pack• System includes desk/dash wall

mount base and 220V transformer• Explosion proof

Features :• Unbreakable ABS body with hi-impact polycarbonate lens• 15 lumen value• 2C alkaline batteries• Explosion proof

Features :• 120° Rotating head• Burn time: 4.75 hrs. (low)/1.75 hrs. (high)• Battery status indicator• 3 mode switch (high, low, flashing)• 710 lumen value• 4 D NiMH battery (included)

Features :• LED light source with 3 AAA llkaline (included)• Ideal for reading maps and light duties around the campsite• 30 lumens with 28 meters beam distance• Explosion proof

Features :• Easy to operate• 45 lumens with 125 meters beam distance• Ideal for firefighters and adventure seekers• Light source : Xenon • Powered by 4 AA alkaline cells (included)• Penetrates smoke, fog, and dust• Explosion proof

Features :• Heavy duty and high powered spotlight• Produces a bright beam that cuts through thick smoke, fog and dust• Comes with a shock absorbing internal battery module• Powered by 8 D alkaline cells• 251 lumens with 106 meters beam distance

FLASHLIGHTHeadsup light Stealthlite Black

Stealthlite™ Rechargeable

Super Pelilight™

LED Lantern

KingLite Yellow

LED HeadsUp Lite

Super Sabrelite

Recoil™ Flashlight

Order No. Type DescriptionPL0000164 2600 Headsup Lite™PL0000530 2680 Headsup Lite Recoil Led

Order No. Type DescriptionPL0000031 2400 Stealthlite Black

Order No. Type DescriptionPL0000134 2450C Stealthlite™ Rechargeable

Order No. Type DescriptionPL0000598 9410 Led lantern

Order No. Type DescriptionPL0000038 4000 Kinglite Yellow

Order No. Type DescriptionPL0000483 2610 LED headsup lite

Order No. Type DescriptionPL0000021 2000C Yellow Super Sabrelite™PL0000020 2000C Black Super Sabrelite™PL0000022 2000C Orange Super Sabrelite™PL0000491 2000C Photoluminescent Super Sabrelite™

Order No. Type DescriptionPL0000475 2010 Black Recoil™ FlashlightPL0000515 2010 Nemo Recoil™ FlashlightPL0000485 2010 Yellow Recoil™ Flashlight

Order No. Type DescriptionPL0000001 1800C Black Super Pelilight™PL0000002 1800C Yellow Super Pelilight™PL0000003 1800C Orange Super Pelilight™

FLA

SHLI

GH

T


Features :• Unbreakable ABS body with ther-

moplastic overmolded accents and polycarbonate lens

• The switch can be easily removed for washing off sand and dirt

• It uses a clever magnetic switch that operates outside of the body to prevent leaking

• Submersible to 500 feet• 8 C alkaline

Features :• Up to 15 hours of burn

time• 2000 lumen of brightness• Maintenance free LED

array with life expectancy of 50,000 hours

• Fully extendable mast with 360 degree rotating head

• Low battery warning system

• Waterproof rubber activa-tion switch

• Mast extension lock• Also available in infrared mode

Features :• Gives the user the ultimate maintenance free portable floodlight station

• Houses two of it’s light heads• It is also equipped with a telescopic handle and rugged wheels for ease of transport

• Low battery warning system• Waterproof rubber activation switch

Features :• Long lamp life and extended battery burn time• Packaged with 4 LR44 alkaline • 12 Lumens with 17 meters beam distance• Light source : LED

FLASHLIGHTL1 1930 LED

NEMO™ 4300

LED Remote Area Lighting Yellow

LED Remote Area Lighting System

Remote Area Lighting System Black with Case

Order No. Type DescriptionPL0000489 1930 L1 LED

Order No. Type DescriptionPL0000520 4300 NEMO™

Order No. Type DescriptionPL0000526 9430 LED Remote Area Lighting Yellow

Features :• RoHS compliant• Almost 10 lbs lighter

than the previous one• New power panel• With battery status

indicator lights• Combined with our

tough 1510 case• The pole extends to a

height of 83” • Provide 1280 lumens of

light


PL0000527 9450 Remote Area Lighting System Black with Case

Order No. Type DescriptionPL0000504 9460 LED Remote Area Lighting System

FLA

SHLI

GH

T

19


SAFETY CASEMedium Case 1510

Small Case 1300

Large Case 1600

Mobile Tool Chest

Large Case 1660

#1650 Large Case

Order No. Type DescriptionPL0000151 1510 Medium Case

Order No. Type Description 0450WD 0450 Mobile Tool Chest

Order No. Type DescriptionPL0000146 1660 Large Case 1660

Order No. Type DescriptionPL0000065 1650 Large Case 1650

Order No. Type DescriptionPL0000059 1450 Medium Case

Order No. Type DescriptionPL0000057 1300 Small Case

Order No. Type DescriptionPL0000064 1600 Large Case

SAFE

TY C

ASE Features :

• Exterior dim (55.9 x 35.1 x 22.9cm) • Interior dim (25.1 x 17.8 x 15.5cm) • Transporter with wheel and exten-

sion handle• Pick and pluck foam • Lifetime guarantee of excellence

Features :• Exterior dim. (L x W x D)

(40.6 x 33 x 17.4cm)• Interior dim. (L x W x D)

(37.1 x 25.8 x 15.2cm)• Optional application panel

frame• Fold down handle• Pick and pluck foam• Lifetime guarantee of excellence

Features :• Exterior dim (27 x 24.6 x 17.4cm) • Interior dim (25.1 x 17.8 x 15.5cm) • Lid / Case Depth 1.18” / 4.93” (3cm /

12.5cm)• Transporter with wheel and

extension handle• Pick and pluck foam or padded

dividers • Lifetime guarantee of excellence

Features :• Exterior dim (61.6 x 49.3 x 22cm) • Interior dim (54.4 x 41.9 x 20cm)• Lifetime guarantee of excellence

Features :• Exterior dim (80 x 58.1 x 48.2cm) • Interior dim (71.5 x 50.1 x 44.7cm)• Lifetime guarantee of excellence

Features :• Heavy duty buttress hinges • Auto pressure eq valves • Two way handles• Stable, wide rack mobility• Removable drawers • Hybrid double throw butterfly latches• Graduated deflector ribs• Secure stack design • Field replaceable wheels

PL-65 #1650• Interior dim. (72.4 x 44.1

x 26.7cm)• Exterior dim. (78.1 x 52

x 29.5cm)• Wheels included, fold

down handle• Pick and pluck foam or

padded dividers• Lifetime guarantee of

excellence

Medium Case 1450


SAFETY CASE1050 Micro Case BB0040 BlackBox 4U Rack Mount Case

1430 Top Loader Case

i1015 Micro Case for i-Phone

1495CC1 Laptop Case with Tray and Organizer

Features :• Great for rugged sports– not

for swimming or sumerging• Available in clear with color liner or solid• Easy open latch• Rubber liner for extra protec-

tion doubles as o-ring seal• Automatic pressure equaliza-

tion valve - balances interior pressure, keeps water out

• Stainless steel hardware• Carabiner• Lifetime Guarantee of Excellence• Water resistant, crushproof,

and dust proof

Order No. Type DescriptionPL0000532 1050 Micro Case 16x9.3x7cm


PL0000540 BB0040 BlackBox 4U Rack Mount Case

Order No. Type DescriptionPL0000557 1430 Top Loader Case

Order No. Type DescriptionPL0000537 i1015 Micro Case for i-Phone


PL0000481 1495CC1 Laptop Case with Tray and Organizer

Features :• Great for rugged sports – not for swimming or submerging• Designed for iPhone™ and iPod touch®• Fits several smart phones including

Blackberry®, T-Mobile®, Nokia®• External headphone jack lets you listen

to your player while case is closed• Built-in cable manager holds

earphones and cables • Stainless steel hardware• Lifetime guarantee of excellence• Water resistant, crushproof, and dust

proof

PL-481 1495CC1 Laptop Case with Tray and Organizer• Fits up to 17” laptops • 3 dial combination lock included• Nylon padded computer sleeve and Accessories pouch• Lid organizer, shock absorbing tray, and

padded shoulder strap• Fold down overmolded handle• Easy open double throw latches• Automatic pressure equalization valve• Stainless steel padlock protectors• Lifetime guarantee of excellence• Watertight, crushproof, and dust proof

Features :• Engineered racks provide a secure and mobile electronics enclosure • Lightweight and compact with 2 wheels• Shock mounts provide 5.1cm of sway space to isolate equipment• Molded-in rib design provides secure stacking and interlock• Patented wide-design Comfort grip handles™ make lifting easy• Black hardware is long-lasting and fastens securely

Features :• Unique top loading design • Easy open double throw latches • Open cell core with solid wall design

- strong, light weight• Watertight, crushproof, dust proof,

O-ring seal, and automatic pressure equalization valve

• Comfortable rubber over-molded handle

• Stainless steel hardware and padlock protectors

• 3 level Pick N Pluck™ with convoluted lid foam

• Lifetime guarantee of excellence

SAFE

TY C

ASE

19


SAFETY CASE

DISPOSABLE

Safety Case

Mob / Clip Cap Anti Skid PP shoe covers

Face Mask 3 Ply with EarloopClear Vinyl Gloves Powder Free

Features :• Material : SPP 10 gsm ; Size: 21” (53cm)

Features :• Material : PP 25 gsm

Features :• Material : vinyl; Plastic;

meets european standard : for food and medical)

Features :• Material : PP 25 gsm

SPECIAL

ORDER

WATER RESISTANTFeatures :• Pressure equalization valve• Easy open latch• Wave foam and customize pre-cut foam • Water resistant durable seal• Wheels and extension handle included (only for kw10-

631 – 638 type)• Elegant colors (black, white, red, and sand yellow)

Benefit :Can be used for bring many items neededshockproof function such as:• Instrument and testing equipment• Camera• Chemical Measuring Cylinder

Order No. Colour Dimensi

KW10-635 BLACK 53 X 35.5 X 22.5cm

KW10-636 RED 53 X 35.5 X 22.5cm

KW10-637 SAND YELLOW 53 X 35.5 X 22.5cm

KW10-638 WHITE 53 X 35.5 X 22.5cm

Order No. Colour Dimensi

KW10-631 BLACK 47.5 X 39 X 20cm

KW10-632 RED 47.5 X 39 X 20cm

KW10-633 SAND YELLOW 47.5 X 39 X 20cm

KW10-634 WHITE 47.5 X 39 X 20cm

Order No. Colour Outside Dimensi

KW10-627 Black 51.5 X 41.5 X 20cm

KW10-628 Red 51.5 X 41.5 X 20cm

KW10-629 Sand yellow 51.5 X 41.5 X 20cm

KW10-630 White 51.5 X 41.5 X 20cm


KW10-623 Black 43 X 38 X 15.4cm

KW10-624 Red 43 X 38 X 15.4cm

KW10-625 Sand yellow 43 X 38 X 15.4cm

KW10-626 White 43 X 38 X 15.4cm


KW10-619 Black 33 X 28 X 12cm

KW10-620 Red 33 X 28 X 12cm

KW10-621 Sand yellow 33 X 28 X 12cm

KW10-622 White 33 X 28 X 12cm

Available colours

Available colours

Order No. Type DescriptionKW1000523 KW10-523 ** Mob/Clip Cap

Order No. Type DescriptionKW1000525 KW10-525 ** Anti Skid PP Shoe covers

Order No. Type DescriptionKW1000524 KW10-524 ** Face Mask 3 Ply with Earloop

SAFE

TY C

ASE

AN

D D

ISPO

SABL

E

Order No. Type DescriptionKW1000528 KW10-528 ** Clear Vinyl Gloves Powder Free 100pcs/Box KW1000793 KW10-793 Clear Plastic Food Glove

** Special Order for Clear Vinyl Gloves

AVAILABLE COLOURS


DISPOSABLE

CONVEX MIRROR

CONE BARRICADE TAPE

Coverall PP with Hood

PVC Traffic Cone

Convex Mirror

Barricade Tape

Lab Coat

KW10-555 Coverall PP with Hood Size M• Material : SPP 25gsm• Size available : M, L

KW10-526Lab Coat Size M• Material : SPP 25gsm• Size available : M, L

KW10-527 Lab Coat Size LKW10-556 Coverall PP with Hood Size L

Order No. Type DescriptionKW1000555 KW10-555 ** Coverall PP with Hood Size MKW1000556 KW10-556 ** Coverall PP with Hood Size L

Order No. Type DescriptionKW1000477 KW10-477 PVC Traffic Cone

Order No. Type DescriptionKW1000503 KW10-503 Barricade Tape Red/WhiteKW1000504 KW10-504 Barricade Tape Yellow/Black

Order No. Type DescriptionKW1000474 KW10-474 Convex Mirror Diameter 800mm with RainshieldKW1000473 KW10-473 Convex Mirror Diameter 600mm with Rainshield

Order No. Type DescriptionKW1000526 KW10-526 ** Lab Coat Size MKW1000527 KW10-527 ** Lab Coat Size L

KW10-474 Convex mirror diameter 800mm with rainshield• Material : Acrylic (mirror) : ABS (body)• Multifunction bracket for wall

and pipe• With rainshield accessories• High durability• Could be attached on wall or

connect to pipe (dia.73mm)• Suitable used in rainy or summer

seasonApplication :• Boulevard, main street (u-turn,

crossside)• Store• Warehouse, mall, hotel, bank,

stadium, and airport parking area

back side

KW10-473 Convex mirror Diameter 600mm with rainshield• Material : Acrylic (mirror) : ABS (body)• Multifunction bracket for wall and pipe• With rainshield accessories• High durability• Could be attached on wall or connect to pipe (dia.50mm)• Suitable used in rainy or summer

seasonApplication :• Road (u-turn, crossside)• Factory aisle• Warehouse aisle• Store• Building parking area (small to medium

area)

Application:Highway, boulevard, main street, road, tollgate, and parking area (mall, hotel, bank, building, factory, airport)

Features :• Material : Soft PVC (body) : PVC reinforced by rubber (base)• Weight : 3.1kg• Height : 70cm• High durability and foldable capability• Strong visibility with two reflective• Heavy body, have a good stability

KW10-503 Barricade tape red/whiteKW10-504 Barricade tape yellow/black

• Length : 100 m• Width : 7.5 cm

DIS

POSA

BLE,

CO

NE,

BA

RRIC

AD

E TA

PE, A

ND

CO

NV

EX M

IRRO

R

19


Inlet Diameter

Ø700mm

VENTILATORVentilator Fan with Duct

KW10-230 Ventilator fan with duct (450mm x10m). The ventilator has a durable and firm structure, with good insulation, high pressure and large air volume. Ventilation for tunnel, basement, ship building or electric soldering and waste gas exhaust out.

KW10-791 Ventilator fan with duct (700mm x10m). The ventilator has a durable and firm structure, with good insulation, high pressure and large air volume. Ventilation for tunnel, basement, ship building or electric soldering and waste gas exhaust out.

KW10-108 Ventilator fan with duct (300mm x 10m). The ventilator has a durable and firm structure, with good insulation, high pressure and large air volume. Ventilation for tunnel, basement, ship building or electric soldering and waste gas exhaust out.

KW10-230

KW10-108

Order No. Type DescriptionKW1000108 KW10-108 Ventilator Fan with Duct (300mm x 10m)KW1000230 KW10-230 Ventilator Fan with Duct (450mm x10m)

VEN

TILA

TOR

Features : • Saving energy• Strong wind power• Convenient to move• Make low noise and light weight due to die-casting aluminum alloy• With good capacity, the reasonable structure and the strong suction• Non explosive

Aplication :• It’s special manufactured for underground cable maintenance, shipping making.• Blowing bad gas when welding shipbuilding, canning, bridge.• Exhaust for fire figthing, piping construction and in other violent working situation for ventilation.


KW1000787 KW10-787 Ventilator Fan 300mm,500 Watt with Duct 10m

KW1000788 KW10-788 Duct 300mm x 10m F/KW10-787





Specification KW10-787 KW10-789 KW10-791

Diameter (mm/inch) 300/12 450/18 700/28

Voltage (V) 220 – 240

Freq. (Hz) 50

Speed (r/min) 2800 1400 960

Power (Watt) 500 700 1500

Flow Rate (m3/min) 65 110 260

Static Pressure (Pa) 385 350 450

Noise (dB) 69 70 72

Measurement m3/unit 0.11 0.3 0.65

Weight (Kg/unit) 16.5 35 84

KW10-791


KW10-414 Eye and Face Safety Shower• Material : 304 stainless steel• Coating : Immersed plastic ABS• Shower : Immersed plastic ABS• Eye wash : Immersed plastic ABS• Pedestal : Cast iron

KW10-415 Eye and Face Wash Standing TypeMaterial : 304 stainless steelCoating : Immersed plastic ABSEye wash : Immersed plastic ABSPedestal : Cast iron

Features :Material : 304 Stainless steelCoating : Immersed plastic ABSEye wash : Immersed plastic ABSBowl : In highly visible yellow ABS

Features :• Free standing eye/face wash• Stainless steel bowl• Hand operated• ANSI Z358.1-1998

Features :• Safety shower with Softstream®

eye/face wash• Stainless steel bowl• Hand operated• ANSI Z358.1-1998

PEM491 Eye and Face Wash Station PEM603 Eye and Face Wash Safety Shower Combination

SAFETY SHOWEREye and Face Safety Shower Eye and Face Wash Wall Mounted Type

KW10-415KW10-414

Order No. DescriptionKW1000414 Eye and Face Safety ShowerKW1000415 Eye and Face Wash Standing Type

Order No. Type DescriptionPR0000404 PEM491 Eye and Face Wash Station


PR0000213 PEM603 PEM603 Eye and Face Wash Safety Shower Combination

Order No. DescriptionKW1000416 Eye and Face Wash Wall Mounted Type

SAFE

TY S

HO

WER

19


Features :• Portable eyewash• 53L capacity• Made from

polyethylene• Size: H 635mm x W

495mm • Flushing time exceeds

15 minute• ANSI Z358.1-1998

Features :• Flammable liquids storage

cabinet• Capacity : 250L+, 3 Shelves• Ext Dimension : 182.5 (H) x

143 (W) x 58 (D) cm• Fabrication of 1.2mm zinc-

coated steel (Shelves 1.5mm)• Supplied with signage as a

specified in the respective standards

• Meet with AS1940 criteria

Features :• Capacity : 19L • Dimension : 43.8 x 30.5 x 30.5 cm• For storage, transportation and dispensing

of flammable liquids• Also available : round and oval storage cans

(3.8L) and round dispensing can (7.6 L)• Application : Production and maintenance,

waste collection and disposal

SAFETY SHOWER AND STORAGE SYSTEMSE4050 Portable Eye and Face Wash

Round Storage Safety Can

Safety Cans

Safety Cabinet

Safety Cabinet

Order No. Type DescriptionPR0000380 SE4050 Portable Eye and Face Wash

Order No. Type DescriptionPR0000660 3615 Round Storage Safety Can

Features :• UDL : 1364kg • Dimension : 41.9 (H) x

134.6 (W) x 73.7 (D) cm • Weight : 29kg• Built for heavy loads,

convenient handling

Drum Spill Pallet

Order No. Type DescriptionPR0000663 1011 Drum Spill Pallet

Order No. Type DescriptionPR0000659 5560AS Safety Cabinet

SAFE

TY S

HO

WER

AN

DST

ORA

GE

SYST

EM

Features :• Storage and dispensing cans feature fl ash arrester and automatic pressure relief• Applications include produc tion and maintenance, waste collection and disposal• Polyethylene and 316 stainless steel models for laboratory and critical environments• Safety drum faucet and drum vent provide pressure/vacuum relief protection for 205L drum

Type DescriptionCapacity H W D

L mm mm mmU1-2-S Safety Can Type I Metal 0.9L 0.9 203 133 133U1-4-S Safety Can Type I Metal 1.9L 1.9 222 171 171

U1-10-S Safety Can Type I Metal 3.8L 3.8 203 229 2293612 Safety Can Type I Metal 7.6L 7.6 273 305 3053613 Safety Can Type I Metal 11L 11 336 305 3053615 Safety Can Type I Metal 19L 19 438 305 305

2336Y Optional Dispensing Funnel for 3600 Series Cans

254

PSP200 Safety Can Type II Metal 3.8L 3.8 305 229 229PSP202 Safety Can Type II Metal 7.6L 7.6 413 229 229PSP203 Safety Can Type II Metal 11L 11 394 305 305PSP205 Safety Can Type II Metal 19L 7.6 241 286 286

PSP-26-S Safety Can Type II Metal 19L 19 343 318 318

Features :• Fabrication of 1.2mm zinc-coated steel (shelves 1.5mm)• Double walled, ‘Z’ bar, reinforced construction for strength and performance• Solvent resistant baked enamel finish (acid resistant epoxy finish for metal corrosives cabinets)• Overlapping lips on all surfaces to prevent ingress of heat• 5-point shelf support for extra strength• Shelf bracket position at each 100mm increment for maximum versatility• Additional shelves available if required• Perforated shelves to facilitate free movement of air• 150mm liquid-light sump to contain spills• Provided with shelf to cover sump.• Self-closing, sequentially closing doors to ensure they are always properly closed• Adjustable door closure rate to ensure optimum performance (instructions inside door)• Flash arrester protected opening for air intake (capped when delivered)

Type Capacity Shelves Extra Shelf Ext Height

Ext Width

Ext Depth

Int Height

Int Width

Int Depth

5516AS 30L 1 5517-29 770 505 460 490 420 3755517AS 60L 2 5517-29 1065 505 460 785 420 3755535AS 100L 1 5535-29 770 920 615 490 835 5305530AS 160L 2 5545-29 1295 1100 460 1015 1015 3755545AS 250L 3 5545-29 1825 1100 500 1545 1015 420

5560ASE 250L+ 3 5560E29 1825 760 830 1580 680 7405560AS 250L+ 3 5560-29 1825 1430 580 1545 1345 495

5555WS3SH 425L 3 5555WS-29 1800 1500 800 1460 1420 7005555S 205L N/A 1435 820 1235 1150 740 1155

5555VS 205L N/A 1750 830 785 1480 745 7005555WS 425L N/A 1800 1500 800 1460 1420 700


SAFE

TY B

OX

Testing and StandardsSentry® products undergo rigorous testing to insure that they can stand up to fire, water and security challenges.

Our products are tested by Underwriters Laboratories to meet independent tandards for fire endurance and security, and by ETL Semko to ensure that they are in compliance with the manufacturer’s specifications for fire endurance and water resistance.

FIRE ENDURANCEUL – Fire Testing About Underwriters Laboratory (UL) TestingIn independent Underwriters Laboratory tests, Sentry®Safe Fire-Safe® products are subjected to fire for 1/2, 1 or 2 hours.

For a product to earn a UL classification, the documents stored inside must remain completely undamaged.

UL 1/2-Hour Fire Endurance Test Sentry®Safe Fire-Safe® products are subjected to temperatures of 1550°F (843°C) for 1/2 hour.

The interior remains below 350° F (177°C) to protect documents.

UL 1/2-Hour Class 125 Test Sentry®Safe Fire-Safe® products are subjected to temperatures of 1550°F (843°C) for 1/2 hour. For the product to qualify for a Class 125 rating, the interior must remain below 125°C (52°C) and below 80% humidity.

UL 1-Hour Fire Endurance TestProduct is subjected to temperatures of 1700° F (927°C) for 1 hour. The interior remains below 350° F (177°C) to protect documents.

UL 2-Hour Fire Endurance Test Product is subjected to temperatures of 1850° F (1010°C) for 2 hours. Product is subjected to a flash fire of 2000° F (1093°C) for 20 minutes and does not explode or rupture.

UL Explosion Hazard Test All UL Classified Sentry®Safe Fire-Safe® products pass a UL Explosion Hazard Test. Product is subjected to a flash fire of 2000° F (1093°C) for 20 minutes and does not explode or rupture.

UL Fire-Impact Test Many traditional safe models which are Sentry®Safe Fire-Safe® branded products also pass a UL Classified Fire-Impact Test. After being heated to 1550° F (843°C), the product is dropped 30 feet (9 m) onto rubble. It is then cooled, inverted and reheated to 1550° F (843°C) for 1/2 hour. To pass, the safe must remain intact and locked, with an interior temperature below 350° F (177°C).

ETL – Fire Testing About ETL Semko Fire Testing Sentry®Safe Fire-Safe® products with an ETL rating have been tested by the independent testing firm ETL Semko.

They are verified to be in compliance with the manufacturer’s specifications for fire endurance.

Depending on the model, SentrySafe products may carry the following ETL ratings

ETL verified 15 ft. (4.5m) Drop Test

ETL verified 1-hour fire protection for CDs, DVDs, USB Drives and Memory Sticks up to 1550° F (843°C)

ETL verified 1-hour fire protection for CDs, DVDs, USB Drives and Memory Sticks up to 1700° F (927°C)

ETL verified for 2-hour fire protection of CDs, DVDs, USB Drives and Memory Sticks up to 1850° F (1010°C)

ETL verified to manufacturer’s fire protection specifications. Up to 1200° F (649°C) for 30 minutes,interior temperature remain below 350° F (177°C)

ETL verified to manufacturer’s fire protection specifications. Up to 1400° F (760°C) for 30 minutes, interior temperature remain below 350° F (177°C)

WATER ENDURANCEAbout ETL Sentry®Safe Fire-Safe® Waterproof Chest and File products have been tested by the independent testing firm ETL Semko.

These products are verified to be in compliance with the manufacturer’s specifications for waterproof submersion.

ETL Waterproof Verification Products were completely submersed, with up to 2 inches (5.08cm) of water above the uppermost surface, for one hour.

The amount of water entering the unit was no more than 0.5grams (8 drops).

Water Resistance Testing Sentry®Safe Fire-Safe® Advanced Business and Home/Office Safes and the Model S0491 and S0891 Fire-Safe® Personal Safes are water-resistant to protect contents from water damage.

The Sentry Group Quality Department has subjected our water-resistant safes to the following conditions:

• Tested for 15 minutes with up to 1,000 gallons (3785ltr) of water spray.

• Tested for 1 hour standing in 6 inches (15.24cm) of water

19


MS-0200

Features :• UL Classified 1-hour proven fire protection• ETL verified 15 ft. drop test• ETL verified for 1-hour fire protection of CDs, DVDs, Memory Sticks and

USB Drives up to 1700°F (926,7°C)• 3-number combination lock with clicking dial• 4 live-locking bolts• Key rack and compartment for small items• Holds standard and A-4 size papers, folders and binders• May be bolted to floor (hardware included)• Color: Gunmetal gray

Order No Type DescriptionS20000081 MS0200 MS0200 Barracuda Fire Safe Home and Office

Specifications :Exterior Dimensions (Metric) 34.8cm H x 41.5cm W x 49.1cm DInterior Dimensions (Metric) 24.4cm H x 31.9cm W x 29.2cm DCapacity (Metric) 22.8 litersWeight 37.2 Kg

Feature :Sentry®Safe uses extremely rigorous, UL and ETL testing standards to ensure that your irreplaceables are protected from fire, water and theft. Proudly made in the U.S.A.Fire-Safe® Personal Safes provide the format of a traditional safe with advanced organizational options, adjustable shelves, trays and a locking drawer. Added peace of mind is provided by bolt-down capability, one full hour of UL classified fire protection, and four live-locking bolts.

MS-3607Features :• UL Classified 1-hour proven fire protection• ETL verified 15 ft. drop test• ETL verified for 1-hour fire protection of CDs, DVDs, Memory Sticks and

USB Drives up to 1700°F (926,7°C)• Electronic lock• 4 live-locking bolts• Multi-position tray• Key rack and compartment for small items• Door pocket• Holds standard and A-4 size papers, folders and binders• May be bolted to floor (hardware included)• Color: Gunmetal gray

Specifications :Exterior Dimensions (metric) 45.3cm H x 41.5cm W x 49.1cm DInterior Dimensions (metric) 34.9cm H x 31.9cm W x 30.2cm DCapacity (metric) 33.6 litersWeight 45.8 kg

Benefit : Sentry®Safe uses extremely rigorous, UL and ETL testing standards to ensure that your irreplaceables are protected from fire, water and theft. Proudly made in the U.S.A.Fire-Safe® Personal Safes provide the format of a traditional safe with advanced organizational options, adjustable shelves, trays and a locking drawer. Added peace of mind is provided by bolt-down capability, one full hour of UL classified fire protection, and four live-locking bolts.


SAFE

TY B

OX

H-2100

WATERPROOF CHEST

Features :• Carry grips• Color: silver gray• Key lock for privacy• ETL Verified 1/2-hour fire protection for CDs, DVDs, USB drives and

memory sticks up to 1550°F (843°C)• Waterproof seal-ETL verified• Proven Fire Protection - 1/2 hr. UL classified

Order No Type DescriptionS20000071 H2100 Fire Safe and Waterproof Chest and Files

Specification :Exterior Dimensions (metric) 19.1cm H x 38.7cm W x 37.8cm DInterior Dimensions (metric) 13cm H x 32.7cm W x 24.1cm DCapacity (metric) 10.3 litersWeight 12.3kg

Benefit : A continuous 360° jamb and waterproof seal completely insulate the interior from the threat of water invasion. A full-time spring latch seals the unit even when it is unlocked.

FIRE and MEDIA SAFE


FIRE, WATER and MEDIA SAFEMSW 3110

Specification :Exterior Dimensions (metric) 45.3cm H x 41.5cm W x 49.1cm DInterior Dimensions (metric) 34.9cm H x 31.9cm W x 30.2cm DCapacity (metric) 33.6litersWeight 45.8kg

Benefit : Sentry®Safe uses extremely rigorous, UL and ETL testing standards to ensure that your irreplaceables are protected from fire, water and theft. Proudly made in the U.S.A.Fire-Safe® Personal Safes provide the format of a traditional safe with advanced organizational options, adjustable shelves, trays and a locking drawer. Added peace of mind is provided by bolt-down capability, one full hour of UL classified fire protection.

Order No Type DescriptionS20000087 MSW3110 Barracuda Fire Safe Home and Office

Features :• UL Classified 1-hour proven fire protection• UL Classified 15 ft. drop test• ETL verified for 1-hour fire protection of CDs, DVDs, Memory Sticks and

USB Drives up to 1700°F (926,7°C)• Water Resistant• 3 number combination lock with clicking dial• 4 live-locking bolts• Multi-position shelf• File rack• Key rack and compartment for small items• Door pocket• Holds standard and A-4 size papers, folders and binders• May be bolted to floor (hardware included)• Color: Black and Gunmetal gray

SAFE

TY B

OX

MS3817 Features :• UL Classified 1-hour proven fire protection• ETL verified 15ft. drop test• ETL verified for 1-hour fire protection of CDs, DVDs,• Memory Sticks and USB Drives up to 1700°F (926,7°C)• Electronic lock and tubular key• 4 live-locking bolts• Multi-position shelf• Multi-position tray• Key rack and compartment for small items• Door pocket• Holds standard and A-4 size papers, folders and binders• May be bolted to floor (hardware included)• Color: Gunmetal gray


Specifications :Exterior Dimensions (metric) 45.3cm H x 41.5cm W x 49.1cm DInterior Dimensions (metric) 34.9cm H x 31.9cm W x 30.2cm DCapacity (metric) 33.6 litersWeight 45.8 Kg

Benefit : Sentry®Safe uses extremely rigorous, UL and ETL testing standards to ensure that your irreplaceables are protected from fire, water and theft. Proudly made in the U.S.A.Fire-Safe® Personal Safes provide the format of a traditional safe with advanced organizational options, adjustable shelves, trays and a locking drawer. Added peace of mind is provided by bolt-down capability, one full hour of UL classified fire protection, and four live-locking bolts.

FIRE and MEDIA SAFE

MS-5635

Specifications :Exterior Dimensions (metric) 60.3cm H x 47.2cm W x 49.1cm DInterior Dimensions (metric) 49.9cm H x 37.6cm W x 30.2cm DCapacity (metric) 56.6 liters Weight 73.0 Kg

Benefit : Sentry®Safe uses extremely rigorous, UL and ETL testing standards to ensure that your irreplaceables are protected from fire, w ater and theft. Proudly made in the U.S.A.Sentry Fire-Safe® Home Safes feature enhanced versatility and the capacity to hold more and/or larger items. Seven live-locking bolts and a 1-hour UL fire classification are standard.



USB Drives up to 1700°F (926,7°C)• Electronic lock• 7 live-locking bolts• Multi-position drawer• Multi-position tray• File rack• Key rack and compartment for small items• Door pocket• Holds standard and A-4 size papers, folders and binders• May be bolted to floor (hardware included)• Color: Gunmetal gray

19


OA-3817

Specification :Exterior Dimensions (Metric) 45.3cm H x 41.5cm W x 49.1cm DInterior Dimensions (Metric) 34.9cm H x 31.9cm W x 30.2cm DCapacity (Metric) 33.6litersWeight 62.1kg

Benefit : Sentry®Safe uses extremely rigorous, UL and ETL testing standards to ensure that your irreplaceables are protected from fire, water and theft. Proudly made in the U.S.A.Sentry Fire-Safe® Home Safes feature enhanced versatility and the capacity to hold more and/or larger items. Six live-locking bolts and a 2-hour UL fire classification are standard.Order No Type Description

S20000088 OA3817 OA3817 Barracuda Fire Safe Home and Office


USB Drives up to 1850°F (1010°C)• Water-resistant• Advanced LCD electronic lock system with backlit keypad,

programmable PIN access and tubular key lock• Allows up to (7) users: (1) manager with program override capability and

(6) additional users• Each user has individual PIN• PINs may be created using 4-8 digits• 5 digit factory access code setting when shipped• 6 live-locking bolts• Metal handle• Multi-position shelf• New multi-position tray• Key rack and compartment for small items• Door pocket• Holds standard and A-4 size papers, folders and binders • May be bolted to floor (hardware included)• Color: Black and gunmetal gray

SAFE

TY B

OX

FIRE, WATER and MEDIA SAFE

OA-5835Features :• UL Classified 2-hour proven fire protection• UL Classified 30 ft. drop test

• ETL verified for 2-hour fire protection of CDs, DVDs, Memory Sticks and

• USB Drives up to 1850°F

• Water-resistant

• Advanced LCD electronic lock system with backlit keypad, Programmable PIN access and tubular key lock

• Each user has individual PIN

• PINs may be created using 4-8 digits

• 5 digit factory access code setting when shipped

• 7 live-locking bolts

• Metal handle

• Multi-position drawer

• Multi-position tray

• File rack

• Key rack and compartment for small items

• Door pocket

• Holds standard and A-4 size papers, folders and binders

• May be bolted to floor (hardware included)

• Color: Black and gunmetal graySpecifications :Exterior Dimensions (Metric) 60.3cm H x 47.2cm W x 49.1cm DInterior Dimensions (Metric) 49.9cm H x 37.9cm W x 30.2cm DCapacity (Metric) 56.6litersWeight 95.7kg

Order No Type DescriptionS20000084 OA5835 Barracuda Fire Safe Home and Office

Benefit : Sentry®Safe uses extremely rigorous, UL and ETL testing standards to ensure that your irreplaceables are protected from fire, water and theft. Proudly made in the U.S.A.Sentry Fire-Safe® Home Safes feature enhanced versatility and the capacity to hold more and/or larger items. Six live-locking bolts and a 2-hour UL fire classification are standard.


FAN

Features :• Durable one-piece molded plastic polyethylene housing• 3/4” garden hose connection supplies water• Flexible capabilities for ducting• Unit and water supply are both portable• Performs at a fraction of the cost of standard air-conditioning• Long-term dependability plus near maintenance-free operation• Environmentally friendly through efficient and effective resource use• Available in 4 fan sizes: 48”, 36”, 24”, and 16” fan blade diameters• U.L. listed (electric models)

Advantages: • Works where traditional air-conditioning is unavailable, impractical or cost prohibitive.• Lowers ambient temperatures an average of 20 degrees.• The most advanced, portable evaporative cooling system.• Operates for pennies a day on tap water and 220 volts or compressed air.• Distributes cooler air instead of just circulating the hot air.• Easy to operate, easy to clean and easy to maintain.• Port-A-Cool® units, combined with accessories, can affordably and

effectively beat the heat.• Offers effective, high-quality cooling at extremely low operational costs.

For more information, contact General Shelters of Texas at 936-598-5651 • 1-800-695-2942 or visit our website: www.port-a-cool.com

Order NoEFFECTIVE LOSS IN LOSS IN

TEMPERATURE PRODUCTIVITY ACCURACY

27°C 8% 0%

30°C 18% 5%

33°C 29% 40%

35°C 45% 300%

38°C 62% 700%*Study for NASA. *Comfort Conditioning the plant with Evaporative Cooling. * Plant Engineering July 8, 1976. pg. 76 Joseph Marg and “Evaporative Air Conditioning Handbook” John Watt, PE and Will Brown PE 3rd edition, pg. 201.

Warehouse Car workshop Sports field

Patio dining

Pool area

Features :• Increases worker productivity by making the

environment more comfortable. • Aids in the enjoyment of meetings or events where

air-conditioning is unavailable or ineffective.• A temporary, portable back-up when the standard

cooling system is inoperable.• Cools machinery or product that may be damaged or

ruined if allowed to overheat.

Outdoor tent Agriculture farm and barn Car repair workshop Industry assembly area

FAN

19


FAN

PAC2K24HPVS

FAN

24” Variable-Speed Unit

Air Delivery CFM 190 m3/minFan Motor 1/3 hp/115v/4.5ampPump 1/6 hp/115v/5ampWater reservoir 53litersDimensions 1.35m x 1.27m x 0.64mUnit weight 70kgShipping weight 82kgBox Size 1.40m x 1.27m x 0.66mCooling Capacity 167m3

Type DescriptionPAC2K24HPVS 24” Variable-Speed Unit

PAC2K36HPVS

36” Variable-Speed Unit

Air Delivery CFM 286 m3/minFan Motor 1/2 hp/115v/6.3 ampPump 1/6 hp/115v/5 ampWater reservoir 75.5litersDimensions 1.70m x 1.57m x 0.81mUnit weight 91kgShipping weight 108kgBox Size 1.72m x 1.62m x 0.84mCooling Capacity 246m2

Type DescriptionPAC2K36HPVS 36” Variable-Speed Unit

PAC2K482S

48” 2-Speed Unit

Air Delivery CFM 311/566 m3/minFan motor 1 hp/115v/8.7ampPump 1/6 hp/115v/5 ampWater reservoir 94.6litersDimensions 2.18m x 1.88m x 0.92mUnit weight 156kgShipping weight 183kgBox Size 2.24m x 1.90m x 0.94mCooling Capacity 371m3

Type DescriptionPAC2K482S 48” 2-Speed Unit

PAC2K36EP

36” Hazard Location

Air Delivery CFM 9,600Fan motor 1/2 hp/110/220v/9.2 ampPump 1/4 hp/110/220v/4.2 ampWater reservoir 20 gallonsDimensions 67”h x 62”w x 32”dUnit weight 270lbs.Shipping weight 310lbs.Box Size 68”h x 64”w x 33”dCooling Capacity 2,500 sq. ft.

Type DescriptionPAC2K36EP 48” 2-Speed Unit


REPLACEMENT PAD

Strongest, heaviest pad available• Made with the heaviest (90 lb.), highest-quality virgin kraft

paper in the industry for maximum longevity• Highest resin content in the industry• Out-performs the competition in tests: - High tensile strength, psi - High dry crush strength, psi - High wet crush strength, psi

Produced using the most advanced curingprocess, Thru-Cure™• KÜÜL® pads are the only pads with each individual sheet cured separately• Cure is consistent and completely established at all contact

points throughout the pad, providing unequaled stability

Available in custom sizes and flute angles• Specializing in custom flute angles and sizes

Advanced resin technology• Improves strength, longevity, absorption and cooling efficiency

Edge coating available• Most durable edge coating in the marketplace

Dimensions (In.) Pads per Shpg.Description H W D Unit Stock # Wt. (lbs.)48” Port-A-Cool® unit 60 12 6 6 PAD6060/G 6.75 ea.36” Port-A-Cool® unit 48 12 6 5 PAD6048/G 5.40 ea.24” Port-A-Cool® unit 36 12 6 4 PAD6036/G 4.05 ea.16” Port-A-Cool® unit 24 12 6 3 PAD6024/G 2.70 ea

PAC2K48EP

FAN

Type DescriptionPAC2K48EP 48” Hazardous Location

48” Hazardous Location

Air Delivery CFM 17,500Fan motor 1 hp/110/220v/13.8ampPump 1/4 hp/110/220v/4.2 ampWater reservoir 25 gallonsDimensions 86”h x 74”w x 36”dUnit weight 400lbs.Shipping weight 460lbs.Box Size 88”h x 75”w x 37”dCooling Capacity 3,500 sq. ft.

FAN

AN

D P

AD

Conversion Table

Weightgrain gram kilogram lbs ounce pound ton

1 0.0647 0.000064 0.000142 0.002 0.000142 6.48

15.432 1 0.000999 0.002 0.035 0.002 10

15432 999.976 1 2.20 35.27 2.20 0.00099

7000 453.592 0.453 1 16 1 0.00045

437.5 28.349 0.028 0.062 1 0.062 0.00003

7000 453.592 0.453 1 16 1 0.00045

15432358 1000000 1000 2205 35274 2205 1

Length

cm feet inch km league league (nautical) metre mile milimetre yard

1 0.03280 0.394 0.00001 0.000002 0.000001 0.01 0.000006 10 0.010936

30.48 1 12 0.00030 0.000063 0.000054 0.304 0.000189 304.8 0.33

2.54 0.083 1 0.00002 0.000005 0.000004 0.025 0.000015 25.4 0.027

100000 3281 39370 1 0.020 0.179 1000 0.621371 1000000 1094

482804 15840 190080 4.828 1 0.868 4828 3 4828040 5280

555600 18228 218740 5.55 1.15 1 5556 3.452 5556000 6076

100 3.280 39.37 0.001 0.000207 0.000179 1 0.000621 1000 1.1

160934 5280 63360 1.609 0.33 0.29 1609 1 1609340 2.7777

0.1 0.003 0.040 0.000001 2.07 1.8 0.001 6.21 1 0.001

91.44 3 36 0.00091 0.000189 0.000164 0.9144 0.000568 914.4 1

cm3 m3 liter inch3 foot3 yard3 gallon (UK) Drum (metric,petroleum) Barrel (UK)

1 0.000001 0.001 0.061 0.000035 0.000001 0.000219 0.000005 0.000006

1000000 1 1000 61024 35.3 1.30 220 5 6.11

1000 0.001 1 61.024 0.035 0.001 0.219 0.005 0.006

16 0.000016 0.016 1 0.000565 0.000020 0.003 0.00008 0.00009

28317 0.028 28.3 1728 1 0.037 6.2 0.141 0.17

764555 0.764 764.5 46656 27 1 168 4 4.6

4546 0.0045 4.5 277.4 0.160 0.005 1 0.022 0.027

200000 0.2 200 12205 7 0.26 44 1 1.22

163659.24 0.16 164 9987 5.78 0.21 36 0.8 1

Volume

Degree celcius

Degree fahrenheit

Degree rankine

Degree reaumur Kelvin

1 33.8 493.47 0.8 274.15

-17.22 1 460.674 -13.776 256

-272.60 -458.68 1 -218.08 0.55

1.25 34.25 494 1 274.4

-272.15 -457.87 1.8 -217.72 1

Temperature

Horsepower (electric) kiloWatt Watt

1 0.75 746

1.34 1 999.64

0.001340 0.000746 1

Power

Horsepower kW Horsepower kW

1.341022 0.7457 8.046132 4.4742

2.682044 1.4914 9.387154 5.2199

4.023066 2.2371 10.728176 5.9656

5.364088 2.9828 12.069198 6.7113

6.705110 3.7285

Power

· Breathing System and Special Safety Application Air go compact scba ... wear with MSA...

Documents

Transcript of · Breathing System and Special Safety Application Air go compact scba ... wear with MSA...