... · Arabal› Kot Kurutma Fırını, Sandviç tip demonte panellerden oluşmaktadır. Paneller...
Transcript of ... · Arabal› Kot Kurutma Fırını, Sandviç tip demonte panellerden oluşmaktadır. Paneller...
You can also watch the videos on; www.metodmakina.com or www.youtube.com/metodmakina “intel ligent heating management”
Arabal› Kurutma Fırınlar› Curing Ovens With Trolley
IDOT - SAMPLEIDOT - E2000IDOT - G2000IDOT - E2500IDOT - G2500
IDOT - E3000IDOT - G3000IDOT - E3500IDOT - G3500IDOT - E4000
IDOT - G4000IDOT - G4500IDOT - G5000IDOT - G6000IDOT - G7000
Box Type Curing Oven with Trolley
Box Type Ovens with Trolley consist of demounted sandwich type panels. The insulation material used between the panels is 60 kg/m3 rock wool and glass wool.
The heating unit is assigned according to the type of the oven and mounted at the backside of the oven. The heating unit is made of stainless steel as the heating system is provided by Natural Gas, Diesel or LPG. As the burning chamber is separated and insulated inside the oven, there is no flame, fire, soot, black, pollution, dust coming up to the jeans so there is no mark, shade or smell etc. on the jeans. There are special air ducts and blowing vents inside the oven in order to assure homogeneous distribution of hot air through the oven.
The oven can be easily installed and used on a plain ground. The rail system on the floor of the oven allows an easy entrance and movement for the trolleys. The oven reaches to set temperature ~160 OC at start-up within 25-30 minutes. The maximum tempera-ture difference between all the points inside the oven is 3 OC. As reaching the set temperature, the automatic temperature limiter is activated so that the set temperature remains constant. Thus, the most suitable working circumstances are obtained.
Arabal› Kot Kurutma Fırını, Sandviç tip demonte panellerden oluşmaktadır. Paneller arasında izolasyon olarak 60 kg/m3 kayayünü ve camyünü kullanılmaktadır.
Fırının türüne göre ısıtma ünitesi seçilerek fırının arka kısmına monte edilmektedir. Fırında gazlı veya mazotlu ısıtma tercih edildi€i taktirde, ısıtma ünitesi paslanmaz çelikten imal edilmektedir. Yanma odası fırının içinde ayrı tutuldu€undan, herhangi bir şekilde fırın içine, alev, kurum, pislik, v.s gelmemekte ve pantolonlar üzerinde iz oluşmamaktadır. Fırının iç kısmında istenilen sıcak havayı homojen olarak da€ıtan hava kanalı ve üfleme menfezleri mevcuttur. Fırın normal zeminde rahatlıkla kullanılabilmekte ve fırın tabandaki kanallar zeminde yürüyen arabanın içeri€i rahatlıkla girmesine olanak sa€lanmaktadır. Fırın ilk çalıştırmada istenilen sıcaklı€a (ortalama 160º C) 25 – 30 dk içerisinde ulaşmaktadır. Fırının her köşesinde sıcaklık maksimum 3º C de€işir ve ayarlanan sıcaklı€a ulaştı€ında otomatik sıcaklık kısıtlayıcı devreye girerek fırının sıcaklı€ını sabit tutar. Böylece fırında en uygun çalışma şartları elde edilir.
Arabal› Kurutma Fırınlar›
End
üstri
yel T
ip K
urut
ma
F›r›n
lar›
Cur
ing
Ove
nsA
raba
l› K
urut
ma
Fır
ınla
r›
Cu
rin
g O
ven
s W
ith
Tro
lle
y
You can also watch the videos on; www.metodmakina.com or www.youtube.com/metodmakina “intel ligent heating management”
AB
C D
IDOT SAMPLEIDOT-SAMPLEMODEL
SPECIFICATIONS
10-12 onz Denim pants per load With Hanger (Apparatus)
Max power consumption per hourTotal heat circulation fan capacityResistance and originMax oven temperatureTemperature controllerMaterials
Trolley / HangersHomogeneity
Certificate
A TOTAL LAYOUTTYPE OF OVENIDOT-SAMPLEIDOT-E2000IDOT-E2500IDOT-E3000IDOT-E3500IDOT-E4000
2000
2000
2000
2000
2000
2000
B2650
2650
2650
2650
2650
2650
C1500
1800
1800
1800
1800
1800
D2100
3200
3700
4200
4700
5200
2100 x 1500 x 2650
3200 x 1800 x 2650
3700 x 1800 x 2650
4200 x 1800 x 2650
4700 x 1800 x 2650
5200 x 1800 x 2650
450 pieces denim/24
hours (based on 20 min.)
The Capacity will be
50% less with Hanger
24 kw
1.500 m3/h, 0,75 kw/h
Resa / Turkey
200°C
Thermostate Control
Firing Unit :
Entirely Stainless Steel
Other :
Galvanized Sheet Meal
No
Max ±3°C between
bottom and top of jeans.
It is shown to customer
with the computer.
CE
IDOT-E2000IDOT-E2000
1.700 pieces denim/24
hours (based on 20 min.)
The Capacity will be 50%
less with Hanger
24 kw
1.500 m3/h, 0,75 kw/h
Resa / Turkey
200°C
Thermostate Control
Firing Unit :
Entirely Stainless Steel
Other :
Galvanized Sheet Meal
1 / 30
Max ±3°C between
bottom and top of jeans.
It is shown to customer
with the computer.
CE
IDOT-E2500IDOT-E2500
2.300 pieces denim/24
hours (based on 20 min.)
The Capacity will be 50%
less with Hanger
24 kw
2.500 m3/h, 1,1 kw/h
Resa / Turkey
200°C
Thermostate Control
Firing Unit :
Entirely Stainless Steel
Other :
Galvanized Sheet Meal
1 / 40
Max ±3°C between
bottom and top of jeans.
It is shown to customer
with the computer.
CE
IDOT-E3000IDOT-E3000
2,900 pieces denim/24
hours (based on 20 min.)
The Capacity will be 50%
less with Hanger
26 kw
3.000 m3/h, 1,5 kw/h
Resa / Turkey
200°C
Thermostate Control
Firing Unit :
Entirely Stainless Steel
Other :
Galvanized Sheet Meal
1 / 50
Max ±3°C between
bottom and top of jeans.
It is shown to customer
with the computer.
CE
IDOT-E3500IDOT-E3500
3.200 pieces denim/24
hours (based on 20 min.)
The Capacity will be 50%
less with Hanger
28 kw
3.000 m3/h, 1,5 kw/h
Resa / Turkey
200°C
Thermostate Control
Firing Unit :
Entirely Stainless Steel
Other :
Galvanized Sheet Meal
1 / 60
Max ±3°C between
bottom and top of jeans.
It is shown to customer
with the computer.
CE
IDOT-E4000IDOT-E4000
3.450 pieces denim/24
hours (based on 20 min.)
The Capacity will be 50%
less with Hanger
30 kw
3.000 m3/h, 1,5 kw/h
Resa / Turkey
200°C
Thermostate Control
Firing Unit :
Entirely Stainless Steel
Other :
Galvanized Sheet Meal
2 / 70
Max ±3°C between
bottom and top of jeans.
It is shown to customer
with the computer.
CE
1819
You can also watch the videos on; www.metodmakina.com or www.youtube.com/metodmakina “intel ligent heating management”
The above values are not stable and can be changed on Project basis.Yukarıdaki değerler sabit değildir ve Proje bazında değiştirilebilir.
You can also watch the videos on; www.metodmakina.com or www.youtube.com/metodmakina “intel ligent heating management”
End
üstri
yel T
ip K
urut
ma
F›r›n
lar›
Cur
ing
Ove
nsA
raba
l› K
urut
ma
Fır
ınla
r›
Cu
rin
g O
ven
s W
ith
Tro
lle
y
AB
C D
IDOT SAMPLEIDOT-SAMPLEMODEL
SPECIFICATIONS
10-12 onz Denim pants per load With Hanger (Apparatus)
Max power consumption per hourMax Natural Gas consumption per hourTotal heat circulation fan capacityMax oven temperatureTemperature controllerMaterials
Trolley / HangersBurner controlHomogeneity
Certificate
A TOTAL LAYOUTTYPE OF OVENIDOT-SAMPLEIDOT-G2000IDOT-G2500IDOT-G3000IDOT-G3500IDOT-G4000IDOT-G4500IDOT-G5000IDOT-G6000IDOT-G7000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
B2650
2650
2650
2650
2650
2650
2650
2650
2650
2650
C1500
1800
1800
1800
1800
1800
1800
1800
1800
1800
D2100
3200
3700
4200
4700
5200
5700
6200
7200
8200
2100 x 1500 x 2650
3200 x 1800 x 2650
3700 x 1800 x 2650
4200 x 1800 x 2650
4700 x 1800 x 2650
5200 x 1800 x 2650
5700 x 1800 x 2650
6200 x 1800 x 2650
7200 x 1800 x 2650
8200 x 1800 x 2650
450 pieces denim/24
hours (based on 20 min)
The Capacity will be
50% less with Hanger
1,12 kw
4 m3/h
1.500 m3/h, 0,75 kw/h
200°C
Thermostate Control
Firing Unit :
Entirely Stainless Steel
Other :
Galvanized Sheet Meal
No
Data control
Max ±3°C between
bottom and top of jeans.
It is shown to customer
with the computer.
CE
IDOT-G2000IDOT-G2000
1.700 pieces denim/24
hours (based on 20 min)
The Capacity will be
50% less with Hanger
1,12 kw
6 m3/h
1.500 m3/h, 0,75 kw/h
200°C
Thermostate Control
Firing Unit :
Entirely Stainless Steel
Other :
Galvanized Sheet Meal
1 / 30
Data control
Max ±3°C between
bottom and top of jeans.
It is shown to customer
with the computer.
CE
IDOT-G2500IDOT-G2500
2.300 pieces denim/24
hours (based on 20 min)
The Capacity will be
50% less with Hanger
1,47 kw
7,5 m3/h
2.500 m3/h, 1,1 kw/h
200°C
Thermostate Control
Firing Unit :
Entirely Stainless Steel
Other :
Galvanized Sheet Meal
1 / 40
Data control
Max ±3°C between
bottom and top of jeans.
It is shown to customer
with the computer.
CE
IDOT-G3000IDOT-G3000
2,900 pieces denim/24
hours (based on 20 min)
The Capacity will be
50% less with Hanger
1,87kw
8 m3/h
3.000 m3/h, 1,5 kw/h
200°C
Thermostate Control
Firing Unit :
Entirely Stainless Steel
Other :
Galvanized Sheet Meal
1 / 50
Data control
Max ±3°C between
bottom and top of jeans.
It is shown to customer
with the computer.
CE
IDOT-G3500IDOT-G3500
3.200 pieces denim/24
hours (based on 20 min)
The Capacity will be
50% less with Hanger
1,87 kw
9 m3/h
3.000 m3/h, 1,5 kw/h
200°C
Thermostate Control
Firing Unit :
Entirely Stainless Steel
Other :
Galvanized Sheet Meal
1 / 60
Data control
Max ±3°C between
bottom and top of jeans.
It is shown to customer
with the computer.
CE
IDOT-G4000IDOT-G4000
3.450 pieces denim/24
hours (based on 20 min)
The Capacity will be
50% less with Hanger
1,87 kw
11 m3/h
3.000 m3/h, 1,5 kw/h
200°C
Thermostate Control
Firing Unit :
Entirely Stainless Steel
Other :
Galvanized Sheet Meal
2 / 70
Data control
Max ±3°C between
bottom and top of jeans.
It is shown to customer
with the computer.
CE
IDOT-G4500IDOT-G4500
4.000 pieces denim/24
hours (based on 20 min)
The Capacity will be
50% less with Hanger
2,25 kw
12 m3/h
3.000 m3/h, 1,5 kw/h
200°C
Thermostate Control
Firing Unit : Entirely
Stainless Steel
Other : Galvanized Sheet
Meal
2 / 80
Data control
Max ±3°C between
bottom and top of jeans.
It is shown to customer
with the computer.
CE
IDOT-G5000IDOT-G5000
4.600 pieces denim/24
hours (based on 20 min)
The Capacity will be
50% less with Hanger
2,95kw
14 m3/h
4.500 m3/h, 2,2 kw/h
200°C
Thermostate Control
Firing Unit :
Entirely Stainless Steel
Other :
Galvanized Sheet Meal
2 / 90
Data control
Max ±3°C between
bottom and top of jeans.
It is shown to customer
with the computer.
CE
IDOT-G6000IDOT-G6000
5.000 pieces denim/24
hours (based on 20 min)
The Capacity will be
50% less with Hanger
4,1 kw
16 m3/h
5.500 m3/h, 3 kw/h
200°C
Thermostate Control
Firing Unit :
Entirely Stainless Steel
Other :
Galvanized Sheet Meal
2 / 110
Data control
Max ±3°C between
bottom and top of jeans.
It is shown to customer
with the computer.
CE
IDOT-G7000IDOT-G7000
6.500 pieces denim/24
hours (based on 20 min)
The Capacity will be
50% less with Hanger
4,1 kw
18 m3/h
5.500 m3/h, 3 kw/h
200°C
Thermostate Control
Firing Unit :
Entirely Stainless Steel
Other :
Galvanized Sheet Meal
2 / 130
Data control
Max ±3°C between
bottom and top of jeans.
It is shown to customer
with the computer.
CE
2021
You can also watch the videos on; www.metodmakina.com or www.youtube.com/metodmakina “intel ligent heating management”
The above values are not stable and can be changed on Project basis.Yukarıdaki değerler sabit değildir ve Proje bazında değiştirilebilir.