Источники питания - Компэл...• OEM Technical downloads • OEM Technical...
Transcript of Источники питания - Компэл...• OEM Technical downloads • OEM Technical...
1
Источники питания
2
Philips Lighting OEMProduct information sources
3
Downloads & moreXitanium drivers
• OEM Technical downloads• OEM Technical downloads (IP67 Family)
– Datasheets, Certificates, CAD files– Design-in guides– Leaflets
• Philips Easy Design-in Tool (EDIT)– Driver-Module combination selection tool– Create your ideal configuration in a minute!
• Philips Multione– Quick drivers programming and setting– Also for analysis, diagnostics of the devices.
Before downloading this software you need to request a User Software Key.
4
XitaniumLED drivers
Enable future proof LED technology
• Reliability• Configurability –
maximum flexibility and differentiation
CertaDriveLED drivers
Sometimes good can be great!
• Good quality at basic specifications for high volume LED business
Two brandsLED drivers
5
Xitanium для офисного применения
Особенности• Срок службы 50 000 ч (@ Tc 75˚C)• Рабочий диапазон температур: -20˚C - + 50˚C• Низкий коэффициент пульсаций• Сертификаты: EAC/CE/ENEC
Преимущества• Возможность установить 2 значения вых.тока 300 и 350мА при допуске±5%• Гальваническая развязка• Коэффициент пульсации ≤ 4%• Гарантия 5 лет
Description 12NC Isolated Dimming Output Voltage Uout max AOC Dimension
Xitanium 40W 0.35A 115V 230V 929001402906 Yes No 80-115 Vdc 120V нет 211x40x30
Xitanium 40W 0.3/0.35A 115V 230V 929001487706 Yes No 70-115 Vdc 120V Переключатель тока 211x40x30
Xitanium 52W 0.3/0.35A 115V 230V 929001487806 Yes No 100-150 Vdc 170V Переключатель тока 211x40x30
211x40x30
Специально для Российского рынка
New!Январь 2019
New!Январь 2019
Фото: образец новых драйверов, не конечный продукт
6
Xitanium iXt industry linear driverRobust LED drivers for industry applications
Features• Longer lifetime 100K hrs @ Tc 75˚C• Improved surge (4kV) • Wide temperature reach: -40˚C to +60˚C• SimpleSet® technology • Low ripple for camera and scanner friendly operation• Central DC operation
Benefits• High reliability underpinned by 5 year warranty• High voltage systems for highest efficiency and lowest cost• Future-proof flexibility• Compatibility
Description 12NC Isolated Dimming Output Voltage Uout max AOC Dimension
Xitanium 300W 0.5-1.4A 300V iXt TD 230V 929001608406 No TD 100-300 Vdc 300V Programmable, SimpleSet, LEDSet 360x50x28
Xitanium 150W 0.2-0.7A 300V iXt TD 230V 929001516506 No TD 100-300 Vdc 330V Programmable, SimpleSet, LEDSet 360x30x21
Xitanium 100W 0.15-0.5A 300V iXt TD 230V 929001516406 No TD 100-300 Vdc 330V Programmable, SimpleSet, LEDSet 360x30x21
Xitanium 150W 0.2-0.7A 300V 230V iXt 929001506706 No No 100-300 Vdc 330V SimpleSet, LEDSet 360x30x21
Xitanium 100W 0.15-0.5A 300V 230V iXt 929001506606 No No 100-300 Vdc 330V SimpleSet, LEDSet 360x30x21
360x30x21
Performance
New!
7
StatementXitanium SR industry linear driverRobust SR LED drivers to create connected industry systems
Features• SR technology• Longer lifetime 100K hrs @ Tc 75˚C• Improved surge protection (4kV) • Wide temperature reach: -30˚C to +60˚C• SimpleSet® technology • Low ripple for camera and scanner friendly operation• Central DC operation
Benefits• Integrated power supply over DALI 2.0 to power sensors and
wireless radios directly from the driver, open spec for all OEMs, simplifying integration of sensors into the luminaire
• High reliability underpinned by 5 year warranty• Future-proof flexibility• Compatibility
Description 12NC Isolated Dimming Output Voltage Uout max AOC Dimension
Xitanium 150W 0.2-0.7A 300V SR 230V iXt 929001540906 No SR 100-300 330V Programmable, SimpleSet, LEDSet 425x30x21
Xitanium 100W 0.15-0.5A 300V SR 230V iXt 929001540806 No SR 100-300 330V Programmable, SimpleSet, LEDSet 425x30x21
425x30x21
8
StatementXitanium SR linear driverSR LED drivers to create connected systems
Features• SR technology• Lifetime 100K hrs (@ Tc 75˚ - 10˚C)• Wide temperature reach: -25˚C to +50˚C• SimpleSet® technology • Low ripple for camera and scanner friendly operation• Central DC operation
Benefits• Integrated power supply over DALI 2.0 to power sensors and
wireless radios directly from the driver, open spec for all OEMs, simplifying integration of sensors into the luminaire
• High reliability underpinned by 5 year warranty• Future-proof flexibility• Compatibility
Description 12NC Isolated Dimming Output Voltage Uout max AOC Dimension
Xitanium 100W 0.25-0.7A 220V SR 230V 929001540706 No SR 50-220 Vdc 250V Programmable, SimpleSet, LEDSet 360x30x21
Xitanium 60W 0.08-0.35A 220V SR 230V 929001540506 No SR 50-220 Vdc 250V Programmable, SimpleSet, LEDSet 360x30x21
Xitanium 60W 0.08-0.35A 300V SR 230V 929001540606 No SR 100-300 Vdc 330V Programmable, SimpleSet, LEDSet 360x30x21
Xitanium 35W 0.08-0.35A 150V SR 230V 929001540406 No SR 50-150 Vdc 180V Programmable, SimpleSet, LEDSet 360x30x21
Xitanium 75W 0.7-2.0A 54V SR 230V 929001505006 Yes SR 27-54 Vdc 60V Programmable, SimpleSet, LEDSet 360x30x21
Xitanium 36W 0.3-1A_54V SR 230V 929001516306 Yes SR 27-54 Vdc 60V Programmable, SimpleSet, LEDSet 360x30x21
360x30x21
Description 12NC Isolated Dimming Output Voltage Uout max AOC Dimension
Xitanium SR Bridge built-in 929001546406 No
Xitanium SR Bridge independent 929001546506 No
9
Светодиодные драйверы для наружного и промышленного освещения (IP67)
10
Xitanium driversРазличные семейства для различных потребностей
Xtreme LITE ProgОграниченый набор функций
Настройка через SimpleSetБазовое управление (DynaDimmer, CLO LITE)1-10В или LineSwitchБазовая диагностика
XtremeFULL ProgМаксимальная гибкость
Настройка через SimpleSetВстроенное управление (DynaDimmer, CLO)Универсальный интерфейс (DALI)Управление группой (LineSwitch/AmpDim)Полная диагностика
Одиночное значение тока1-10В
Xtreme Sensor Ready Connected
Xtreme SingleCurrentМинимальная цена
Standalone solutions Connected solutions
Настройка через SimpleSetSR интерфейс и питание 24ВТочное измерение электроэнергииAccurate Energy MeteringВстроенное управлениеРасширенные возможности диагностики
11
Xitanium Xtreme drivers
Xi FP 150W 0.2-0.7A SNLDAE 230V S240 sXt
Функции:S = SimpleSetN = NTC inputL = LineSwitch1 = 1-10V interfaceD = DALI InterfaceA = AmpDimE = DC EmergencyM = Energy MeteringP = Auxiliary Power supply
Тип драйвера:Xitanium (Xi)
Power:Output Power (max)
Дипазано выходного тока на модуль:Output current range (Operating range in Amp for performance)
Входное напряжение:230V = 220-240V
ЗащитаsXt = 100т.ч, Защита 10кВ/6кВ
КорпусI220, S175, C150, S240, (I= IP76, S= Stretched, C=Compact, ### = length)
Семейство драйверов:No Indication = Single Current (одиночное значение тока)LP (LITE Prog) = Драйвер оконного типа (AOC, CLO LITE, DynaDimmer)FP (FULL Prog) = Драйвер оконного типа(AOC, CLO, DynaDimmer)SR (Sensor Ready) = Драйвер оконного типа (AOC, DALI-SR, CLO, DynaDimmer)
12
Benefit Xitanium s. current Xitanium lite prog Xitanium full prog
Reliable
Flexible
Connected
Особенности и преимуществаОсобенность Преимущество Xitanium single
currentXitanium single
current(TWE)
Xitanium Lite Prog Xitanium AOC (Adjustable Output
current)
Надежность Долгий срок службы: < 10% отказов 100 000 50 000 100 000 100 000
Защита от перенапряжения CM / DM 4/ 4 kV 4 / 4 kV 10 / 6 kV 6 / 4 kV
Номинальное входное напряжение 220-240 110-277 220-240 220-240
Гибкость SimpleSet & AOC, окно до 1.5A SimpleSet Потенциометр
DynaDimmer 5-step
Ограничение температуры драйвера (DTL)
Управление 1-10В X X X
LineSwitch
DALI 2.0
Возможность создания сети
SR интерфейс & 24V дополнительное питание
Точное измерение энергии(1%)
Обновлние FW через SR (OTA)
Диагностика Full
Xitanium Xtreme drivers IP67
13
Мощность & Корпус(Ixxx= I - IP67, xxx- длина копуса,IxxxC = I - IP67, xxx- длина копуса,C - коннектор)
Xitanium Single Current Xitanium Single Current (TWE) Xitanium Lite Prog
150W I220/I220C
150W I175/I175C
100W I220/I220C
100W I175/I175C
75W I175
65W I160
40W I160
25W I160
Xitanium drivers IP67– портфолио 2018
Q4 `18
Q1 `19
14
Мощность & Корпус(I= IP66/67 без коннектора, IxxxC= IP66/67 c коннектором)
Single Current Single Current (TWE)
Lite Prog Xitainum AOC
250W I240
220W I220/I220C/I230/ I230C/I240C
200W I250
185W I220
150W I165C/I220
100W I165C/I220
Xitanium drivers IP67– портфолио 2018
Версия без коннектора
Версия с IP коннектором
15
Customer orientedMore flexibility with different cable length
Outdoor Independent Driver(Connector version)
Accessory (Input side)
Accessory (Output side)
Accessory (1-10V Dim side)
16
Accessories- Connector
12NC Description Weight(kg)
Qty/ box (PCS)
Cable length(cm)
Connected with Driver
929001460180 Connector WP F30 Input 0.0394 300 30 Input side
929001460280 Connector WP F60 Input 0.0643 250 60 Input side
929001460380 Connector WP F90 Input 0.0891 200 90 Input side
929001460480Connector WP M30 Output 0.0327 300 30 Output Side
929001460580Connector WP M60 Output 0.0533 250 60 Output Side
929001460680Connector WP M90 Output 0.0738 200 90 Output Side
929001460780 Connector WP M30 1-10V 0.0327 300 30 1-10V Dim
17
Светодиодные драйверы для наружного освещения IP20
FULL & LITE Programmable
18
Xitanium Xtreme driversУникальные преимущества и особенности
Долгий срок службы
100,000 ч<10% отказов
Защита 10кВ CM и6кВ DM
Легкое проектирование
светильниковЭМС, клеммы
Высокая эффективнос
ть до 93%
Встроенные функции
диммирования:DynaDimmer,
CLO, ..
Цифровые и аналоговые
выходыDALI, 1-10В
Просто шаговое иммирование с
LineSwitch
Легкая настройка и
программирование SimpleSet®
1919
Xitanium basic programmable 12W S 230V C100
Easy fixture integration• Very compact size, fitting with a wide
range of lower lumen outdoor luminaires• Configurable operating window (AOC)• Easy to design-in based on good thermal
and EMI behavior• Designed and released for Class I & II
systems• SELV isolated• Easy and fast wireless programming via
SimpleSet• Compatible with MultiOne Basic for fast
and efficient current setting
Reliable• Robust design: withstanding harsh
Outdoor conditions against moisture, vibration and temperature
• Surge protection 6 / 4 kV (CM / DM)• Lifetime up to 100,000 hours• Ambient temperature ranging from
-40 to + 55 deg C. • Optimized for Philips SLM and other
chip on board LED’s
Total Cost of Ownership• Low initial cost via a global
platform design• Lower maintenance costs due to long
lifetime and high survival rate• 5 years warranty
2020
Основные характеристики
Driver type Power &Housing
Output Current
Dimming (Interface) Lifetime Surge Protection(CM/DM)
Xi BP 12W 0.1-0.5A S 230V C100 12W, C100 0.1-0.5A Non dimmable 100k Hrs, >90% survivors 6 kV / 4 kV
Type SimpleSet AOC Dyna Dimmer ALO DALI CLO OWP MTP AmpDim DTL Diagnostics
BASIC Prog versions Yes Yes - - - - Yes - - - -
Software features
21
Benefit Xitanium s. current Xitanium lite prog Xitanium full prog Xiantium SR
Reliable
Flexible
Connected
Особенности и преимуществаОсобенность Преимущество Xitanium s. current Xitanium lite prog Xitanium full prog Xiantium SR
Надежность Долгий срок службы: 100,000 ч < 10% отказов
X X X X
Защита от перенапряжения CM / DM 4/ 4 kV 10 / 6 kV 10 / 6 kV 8 / 6 kV
Защита сетевого X X X
Димиирование при аварийном режиме DC
150W 165W X X
Гибкость SimpleSet & AOC, окно до 1.5A X X X
DynaDimmer 5-step 5-step 5-step
Ограничение температуры драйвера (DTL)
X X
Управление 1-10В X X
LineSwitch (шаговое диммирование) SL X
DALI 2.0 X X
Возможность создания сети
SR интерфейс & 24V дополнительное питание
X
Точное измерение энергии(1%) X
Обновлние FW через SR (OTA) X
Диагностика Full Full Extended
new
new
new
new
new
new
new
Xitanium Xtreme drivers IP20
22
New introductions Xitanium Xtreme LED DriversPower & Housing(C = Compact, S = Stretched)
XtremeSingle Current / Dimm.
XtremeLite Programmable
XtremeFull Programmable
XitaniumSR
330W C240
165W C170 165W – 2019 Q1
110W C150 110W – 2018 Q4
75/100W C165
70W C150
75W C133 75W + 110W – 2018 Q3 75W (C150) – 2018 Q4
40W C123 40W – 2018 Q4 C133
22W C123 12W – 2018 Q322W – 2019 tbd 12W & 22W in C133
250W Q-can / I220
100W*/150W S240 / Y
65W*/75W S240 / I220
40W S175
22W S175
75W
= Available
10kV
10kV
= New launch / UpgradeDriversXtreme LED
10kV
10kV
10kV
10kV
Upgrade 2018 Q3
Upgradeto C133
10kV
10kV
10kV
10kV
10kV
10kV
10kV
10kV
8kV
10kV
10kV
10kV
10kV
*
*
23
SimpleSet: Simply touch to configureXitanium Xtreme drivers
24
Xitanium LITE Programmable
1-10V settingsAdjustable Output Current (AOC)Constant Light Light Output (CLO LITE)Driver Temperature Limit (DTL)DynaDimmer
Xitanium FULL Programmable
Adjustable Light Output (ALO)AmpDim (Mains Dimming)Adjustable Output Current (AOC)Constant Light Output (CLO)DC-EmergencyDriver Temperature Limit (DTL)DynaDimmerEnd Of Life Indication (EOL)Light Source AgeLineSwitchModule Temperature Protection (MTP)Startup Timer (Smooth light level start)
Programmable feature setXitanium Xtreme drivers – FULL/LITE Programmable
25
Constant Light Output (CLO)Xitanium Xtreme drivers – FULL/LITE Programmable
16 steps programmable of Constant Light OutputDeafault or customizabe linear scheduleLogarithmic or free form creation
Linear version of Constant Light OutputConfigurable planned max. working time (hrs) Configurable initial power level (%)
Xitanium FULL ProgrammableXitanium LITE Programmable
26
Module Temperature Protection (MTP)Xitanium Xtreme drivers – FULL Programmable
Xitanium FULL Programmable
To protect your module against over-heating
Free choice to select the used NTC typeSet temperature the MTP starts to dimSet minimum light level
NTC use will remain as feature for the Xi FP drivers
Xitanium LITE Programmable
27
Driver Temperature Limit (DTL)Xitanium Xtreme drivers – FULL/LITE Programmable
Xitanium FULL Programmable (potted)Xitanium LITE Programmable (potted)
Driver Temperature Limit feature allows configuration of temperature levels for• Start dimming• Stop dimming (also lowest light level can be set)• Shut down – temperature at which the dim level is set to zero
28
• 5 step Dynadimmer- configurable start and end time- configurable dim level- ability to complete switch-of light
Time based or learned midnight point can be selected as a reference for timekeeping.
Midnight shift to compensate for location
Note: without switch-off for upgraded Xi LP drivers
• 2 step DynaDimmer LITE- configurable start and end time- configurable dim level
Xi LP (upgraded) + Xi FP programmableXitanium lite programmable (earlier 2-step)
DynaDimmerXitanium Xtreme drivers – FULL/LITE Programmable
29
LineSwitch (Step dimming / Sensor)Xitanium Xtreme drivers – FULL Programmable
LineSwitch• High / Low level
Sensor• Integrated switch-off relay
Smooth light• Fade-on / Fade-down timing
Xitanium FULL ProgrammableXitanium LITE Programmable
30
AmpDim (Mains dimming)Xitanium Xtreme drivers – FULL Programmable
Xitanium FULL Programmable
For use with conventional mains dimming system, cabinet-based dimming without the need for additional control wires orinfrastructure changes
Set the voltage level the fixture should start to dim lightSet dim level at lowest mains voltage
AmpDim works with constant amplitude reduction and no sinewave waveshape modification
30 Lighting OEM
Xitanium LITE Programmable
31
DC Emergency (Central Emergency)Xitanium Xtreme drivers – FULL Programmable
Xitanium FULL Programmable
To use your fixture on central emergency lighting
Driver will automatically switch to the configured output di level if DC mains (Battery-mode) is detected.
Xitanium LITE Programmable
32
Mains guardXitanium Xtreme drivers – FULL/LITE Programmable
Xitanium FP driversThis built-in Mains guard feature prevents dark spots when the 220-240V mains voltage drops below normal conditions.
To protect the luminaire and the installation from 180V onwards the output power will be limited.
Mains guard works even down to 90 Volt, output power will be limited down to 10%. (see graph)
Mains guard feature will take care the mains current will never exceed 130% of the nominal current at 230V.
Benefits for customers• Light will remain on even at extreme low mains voltage (no dark spot)• Luminaire is fully protected against under voltage• The max input current will be limited to max 130% and therefore
prevents over-current in the installation and tripping of MCB or fuses. • Mains guard is implemented in all Xi FP drivers with production date 1636 or later
• Also implemented in upgraded Xi LP drivers
33
Diagnostics overviewXitanium Xtreme drivers – FULL/LITE Programmable
Diagnostics read outvia SimpleSet for Xi LP driversvia SimpleSet or DALI for Xi FP drivers
Diagnostics includes:• System information:
System burning hours, # system starts, Temperatures, Mains voltage• In-field fault finding:
LED board defect, NTC, Driver temperature• Long period recording displayed in histogram for diagnostics
Xitanium FULL/upgraded LITE ProgrammableDiagnostic LED module voltage (V) LED module current (mA) LED module dim level (%) LED module temperature (ºC) Driver temperature (ºC) System starts System on time (h) Module on time (h) Module energy consumed Short circuit Open circuit Module NTC missing Module temperature reduction active Module temperature too high Mains too low Adjustable Startup Time active
34
Diagnostics overviewXitanium Xtreme drivers – FULL/LITE Programmable
Xitanium FULL/upgraded LITE Programmable Diagnostic LED module voltage (V) LED module current (mA) LED module dim level (%) LED module temperature (ºC) Driver temperature (ºC) System starts System on time (h) Module on time (h) Mains overvoltage countModule energy consumed Short circuit Open circuit Module NTC missing Module temperature reduction active Module temperature too high Mains too low Adjustable Startup Time active
35
Dynadimmer overview
Lighting OEM3
36
Dynadimmer overview 1/4Xitanium Xtreme drivers – Dynadimmer
Dynadimmer is an autonomous dimming control developed by Philipsthat enables simple, pre-programmed customized multistep dimming.
Xi FP: up to five configurable steps, incl. light turn-off
36 Lighting OEM
During Dynadimmer operation the other dimming interface functionalities will be ignored but override is possible in the following ways:Xi FP - via DALI - as soon as the driver detects a DALI frame it will change over from
Dynadimmer mode to DALI mode and remain in DALI mode until the next mains power cycle.Xi FP - via LineSwitch - overrule the Dynadimmer by applying mains voltage to the LineSwitch input
(‘high’ input), results in change over to full light output (only).As soon as the LineSwitch input is changed back to ‘low’, the Dynadimmer will resume operation.
Xi LP SL - via LineSwitch - as above - note Xi LP SL drivers to be phased out.Xi LP S1 - via 1-10V interface – by shorting the +/- terminals of 1-10V by a relay or pulling level below 2V
by a controller.As soon as contact is opened or interface voltage raised above 3.2V, the Dynadimmer will resume operation.
Simultaneous use of Dynadimmer and 1-10V dimming is not possible. These are mutually exclusive.
Xi LP (upgraded): up to five configurable steps, light turn-off not supported
Xi LP (earlier/not upgraded): one configurable step, light turn-off not supported
37
Dynadimmer overview 2/4Xitanium Xtreme drivers – Dynadimmer
Time based:• starts executing the Dynadimmer profile as soon as power is applied to the driver• does not compensate for seasonal changes• best suited for applications with fixed power-on/off timing
Mid-point/location based:• Based on the average power-on time of the previous periods, the driver calculates
a reference mid-point for the dimming schedule and uses it as a virtual clock.• Relies on a regular power-on time from one night to the next. Typically based on
sunset and sunrise and its duration will vary gradually throughout the seasons.• Dynadimmer calculates the power-on time average of the 5 last preceding stable
nights – implying that after first installation, until virtual clock not calculated (3 nights), dimming schedule can not run, thus Dynadimmer will not dim the light output for the first 3 nights.
Geographical location within a time zone will create difference in sunset and sunrise.This can effect correctness of the calculated virtual clock.To compensate this user can set his geographical location in both western (+) or eastern (-) direction.
Sunset in: Lisabon 19:35 <----> Berlin 19:00 <----> Warsaw 18:25
37 Lighting OEM
38
Dynadimmer overview 3/4Xitanium Xtreme drivers – Dynadimmer
Dynadimmer attention points• Change in power-on time is more than one hour – driver checks last 5 nights and if
3 identical on-times are found no re-sync. This prevents disruption of the Dynadimmer dimming behavior due to occasional mains black- and brownouts.
• Change in power-on time is less than one hour - represent normal operation. Driver will average the last three power-on times to calculate the virtual clock while gradually adapting dimming schedule to the new power-on time.
• Influence of mains interruption (blackout):• If the mains voltage drops to zero for more than one second – considers as a
new night and will act as if on time changed more than 1 hour (looks for 3 in 5)• If the mains voltage drops to zero for less than a second - Dynadimmer
dimming cycle remains unaffected.
• Influence of mains voltage dip (brownout):• The driver is robust enough to handle a mains voltage dip down to 25VAC for
one minute without disruption of the Dynadimmer timing. Light output will be less or zero for the duration of the mains dip but the dimming schedule will not be affected.
38 Lighting OEM
39
Dynadimmer overview 4/4Xitanium Xtreme drivers – Dynadimmer
Temporary mains power-off (maintenance at night, blackout):• If power outage occurs within the first 4 hours of the night then a new night will
be calculated on the remaining on-time. Average on-time before the outage will be used as reference thus regular dimming will result.
• If the power outage takes place after more than four hours and not closer thanone hour before the expected end of the night then this deviating on-time will be taken into account to calculate the average power-on time of the five preceding nights. As average for 5 nights is taken it won’t affect the dimming duration of the next night.
• If the outage takes place within one hour before the expected end of the night this will be taken into account as a valid night average power-on time and thus temporarily will affect the dimming behavior.
Temporary mains power-on (maintenance during the day):• If the power-on time is less than four hours then this deviating power-on time will
be ignored and the average power-on time before the deviation will be used as reference. No effect on dimming behaviour for next night.
• If the power-on time is more than four hours and at least one hour less than the average power-on time of the three preceding nights then this deviating power-on time will be taken into account to calculate the average on-time of the five preceding nights. However, it won’t affect the dimming duration of the next night.
39 Lighting OEM
40
Dynadimmer overview – final notesXitanium Xtreme drivers – Dynadimmer
By default the mid position of a time zone will be selected; in most cases this default value will be accurate enough.
The midnight shift option is of course not available when the Time based option has been selected.
Dynadimmer does not compensate for the 1-hour shift in time due to daylight savings time changes in fall and spring.
The Dynadimmer feature does not support 24h applications (e.g. tunnels, warehouses). A power off/on cycle is required every 24 hours.
Dynadimmer operation is not supported when the driver is operated on a DC grid.
40 Lighting OEM
41
42
Surge protection
43
Lightning occurrence and location important to define level of surge protection
Rated impulse voltage withstand levels according IEC 60364-1 : Low voltage electrical installations
NormalNetwork voltage
mS to S X time µS nS µS to mS
Surges induced by switching
ESD could be caused by dry air together with wind :
During lightning storms
Overvoltage (TOV)
TOV, ESD & Lightning events are the most critical for outdoor luminaires
Levels and time expressed here are only indicative. In nature it might be higher.
44
Surge protection class-I (in luminaire)Overview of differences between driver integrated surge protection and external SPD
Xtreme Driver External SPD
Diverting high CM surge currents (kA range) from the LED module and driver
No Yes (additional protection)
Diverting small CM surge currents through LED driver (10 – 100A range) from the LED module
Yes Yes (additional protection)
Rated discharge current (In) & number of pulses --3 kA DM (CM n.a.) min. 40 pulses
10 kA CM/DM min. 1 pulses5 kA CM/DM min. 50 pulses3 kA CM/DM min. 100 pulses
Combined discharge Voltage (Uoc) 10 kV CM, min. 20 pulses (insulation level)8kV CM, min. 80 pulses (insulation level)6 kV/3 kA DM min. 40 pulses (2 Ohm)
20kV/10kA CM min. 1 pulse (2 Ohm)10 kV/10 kA CM min. 1 pulse (1 Ohm)
Recommendation Apply in case of low to medium exposure to lightning and inductive load grid switching
Apply in case of medium to high exposure to lightning
45
Surge protection class-II (in luminaire)Overview of differences between driver integrated surge protection and external SPD
Xtreme Driver External SPD
Diverting high CM surge currents (kA range) from the LED module and driver
No No
Diverting small CM surge currents through LED driver (10 – 100A range) from the LED module
Yes No
Rated discharge current (In) & number of pulses --3 kA DM (CM n.a.) min. 40 pulses
10 kA DM min. 1 pulses5 kA DM min. 50 pulses3 kA DM min. 100 pulses
Combined discharge Voltage (Uoc) 10 kV CM, min. 20 pulses (insulation level)8kV CM, min. 80 pulses (insulation level)6 kV/3 kA DM min. 40 pulses (2 Ohm)
20kV/10kA DM min. 1 pulse (2 Ohm)10 kV/10 kA DM min. 1 pulse (1 Ohm)
Recommendation Apply in case of low to medium exposure to lightning and inductive load grid switching
Apply in case of medium to high exposure to lightning
46
Surge protection class-I: installation level
* Dependig on flash density and uptime requirements
Class I Luminaire
Default Solution(Philips standard)
External SPD(type3 in luminaire)
Installation protection
Sensitivity*
Close to earth
Source exposure
Pole
Conductive or not
Direct & Indirect lightning Static overvoltage
No issueHighLow
Xitanium driver (10kV CM / 6kV DM)
Xitanium driver (10kV CM / 6kV DM)
Philips SPD (Xtreme) Class-I
Cascading Protection (e.g. SPD type2 protected mast, SPD type 1 in cabinet)
47
Class II Luminaire
Close to earth
Sensitivity*
Source exposure
Installation protection
External SPD(type3 in luminaire)
Default Solution(Philips standard)
Surge protection class-II: installation level
* Dependig on flash density and uptime requirements** Earth connection is only possible in few countries where the metallic mast must be interconnected to earth whatever the luminaire class is
Xitanium driver (10kV CM / 6kV DM)
Philips SPD (Xtreme) Class-I +Connect SPD GND output to earth of
the installation** (CM)
Cascading Protection (e.g. SPD type2 protected mast, SPD type 1 in cabinet)
Pole
Conductive
Direct and indirect lightning
Staticovervoltage
No issueHigh
Insulated
StaticovervoltageIndirect lightning
No issue High
Bleeder Resistors or other staticdischarging solution
Bleeder Resistors or other staticdischarging solution
Cascading Protection and bleederresistors
48
White paperThe challenges of surge protection
Availablenow
49