( A GOVT. OF KARNATAKA ENTERPRISE ) BELLARY …
Transcript of ( A GOVT. OF KARNATAKA ENTERPRISE ) BELLARY …
31-JAN-18 11:14:24
( A GOVT. OF KARNATAKA ENTERPRISE )
GR142
OFFICE OF THE
PURCHASE ENQUIRY
SE(S&P)BTPS/EL/EETM/17-18/389
SE(S&P)BTPS/EL/EEPS/17-18/390
SE(S&P)BTPS/EL/EEIC1/17-18/391
SE(S&P)BTPS/EL/EEIC1/17-18/392
SE(S&P)BTPS/EL/EEIC1/17-18/395
SE(S&P)BTPS/EL/EETM/17-18/398
SE(S&P)BTPS/EL/ADPH/17-18/446
Enquiry NoDate
Procurement of Oil Seal
Procurement of PVC Flexible Conduit Pipes
Procurement of Oil Gun Engauge Limit Switch
Procurement of Flow Indicator
Procurement of I/P Converter
Procurement of Door Seals
Procurement of Discharge Rods
Subject
23/02/2018 15:30
23/02/2018 15:30
23/02/2018 15:30
23/02/2018 15:30
23/02/2018 15:30
23/02/2018 15:30
23/02/2018 15:30
Last Date Of Receipt/Opening of Tender
23/02/2018 15:00
23/02/2018 15:00
23/02/2018 15:00
23/02/2018 15:00
23/02/2018 15:00
23/02/2018 15:00
23/02/2018 15:00
1
2
3
4
5
6
7
SlNo
13/12/2017
13/12/2017
13/12/2017
13/12/2017
13/12/2017
19/12/2017
23/01/2018
Sealed itemwise quotations/offers against below mentioned enquiries are invited from manufactures/authorised dealers/reputedsuppliers. The details of these enquiries are also available on website www.karnatakapower.com .
The offers may be submitted well within due date of receipt. Any further details can be had from above office by writtenrequisition.
KST No 70100202 Dated 03/09/1984 CST No 70150205 Dated 03/09/1984TIN No 29440405909 Dated 13/09/2005CIN-U85110KA1970SGC001919
SUPERINDENTING ENGINEER(S&P)BTBELLARY THERMAL POWER STATION,KPCLKUDTHINI, PIN-583152Phone 9448290584 Fax 8392288616 Mail [email protected]
SUPERINDENTING ENGINEER(S&P)BT
KARNATAKA POWER CORPORATION LIMITED
BELLARY THERMAL POWER STATION
31-JAN-18 11:14:24
Sir, Please send your quotation/offer with terms and conditions for the materials specified in the table below.
2430103019
2430103027
2430103035
2430103043
2430103051
2430103060
2430103078
Item Code
OIL SEAL 30X16X17
OIL SEAL 12.7X21.5X7
OIL SEAL 15X24X7
OIL SEAL 40X55X7
OIL SEAL 22X35X7
OIL SEAL 25X35X7
OIL SEAL 20X40X10
Item Name/Specification
10
50
10
6
40
40
10
OIL SEAL 30x16x17 MATERIAL:- NBR/MS, Specific gravity:-1.22Gms/CC(ASTM D792),Hardness:- 70-75 Shore A degree(ASTM D 2240),Tensile Strength:- >102kg/sqcm(ASTM D 412),Elongation at break:->250%(ASTMD412), Withstand a temperatue of 100 Deg C. Make :- Max Spare(spareage)/Bombayoil seals/SS Ruber.
OIL SEAL 12.7X21.5X7 MATERIAL:- NBR/MS, Specific gravity:-1.22Gms/CC(ASTM D792),Hardness:- 70-75 Shore A degree(ASTM D 2240),Tensile Strength:- >102kg/sqcm(ASTM D 412),Elongation at break:->250%(ASTMD412), Withstand a temperatue of 100 Deg C. Make :- Max Spare(spareage)/Bombayoil seals/SS Ruber.
OIL SEAL 15X24X7 MATERIAL:- NBR/MS, Specific gravity:-1.22Gms/CC(ASTM D792),Hardness:- 70-75 Shore A degree(ASTM D 2240),Tensile Strength:- >102kg/sqcm(ASTM D 412),Elongation at break:->250%(ASTMD412), Withstand a temperatue of 100 Deg C. Make :- Max Spare(spareage)/Bombayoil seals/SS Ruber.
OIL SEAL 40X55X7 MATERIAL:- NBR/MS, Specific gravity:-1.22Gms/CC(ASTM D792),Hardness:- 70-75 Shore A degree(ASTM D 2240),Tensile Strength:- >102kg/sqcm(ASTM D 412),Elongation at break:->250%(ASTMD412), Withstand a temperatue of 100 Deg C. Make :- Max Spare(spareage)/Bombayoil seals/SS Ruber.
OIL SEAL 22X35X7 MATERIAL:- NBR/MS, Specific gravity:-1.22Gms/CC(ASTM D792),Hardness:- 70-75 Shore A degree(ASTM D 2240),Tensile Strength:- >102kg/sqcm(ASTM D 412),Elongation at break:->250%(ASTMD412), Withstand a temperatue of 100 Deg C. Make :- Max Spare(spareage)/Bombayoil seals/SS Ruber.
OIL SEAL 25X35X7 MATERIAL:- NBR/MS, Specific gravity:-1.22Gms/CC(ASTM D792),Hardness:- 70-75 Shore A degree(ASTM D 2240),Tensile Strength:- >102kg/sqcm(ASTM D 412),Elongation at break:->250%(ASTMD412), Withstand a temperatue of 100 Deg C. Make :- Max Spare(spareage)/Bombayoil seals/SS Ruber.
OIL SEAL 20X40X10 MATERIAL:- NBR/MS, Specific gravity:-1.22Gms/CC(ASTM D792),Hardness:- 70-75 Shore A degree(ASTM D 2240),Tensile Strength:- >102kg/sqcm(ASTM D 412),Elongation at break:->250%(ASTMD412), Withstand a temperatue of 100 Deg C. Make :- Max Spare(spareage)/Bombayoil seals/SS Ruber.
SlNo
Unit RequiredQuantity
NUMBERS
NUMBERS
NUMBERS
NUMBERS
NUMBERS
NUMBERS
NUMBERS
1
2
3
4
5
6
7
( A GOVT. OF KARNATAKA ENTERPRISE )
GR142
OFFICE OF THE
PURCHASE ENQUIRY
SE(S&P)BTPS/EL/EETM/17-18/389 13/12/2017PURCHASE ENQUIRY NO : DATE :
31-JAN-18 11:14:24
2430103086
2430103094
2430103108
2430103116
2430103124
5414201077
5414201085
5414201093
Item Code
OIL SEAL 18X35X7
OIL SEAL 30X40X7
OIL SEL 35X52X 7
OIL SEALL 70X90X10
OIL SEAL 17X32X7
O-RING 104.14X5.33
O-RING 148.59X5.33
O-RING 164.69X3.53
Item Name/Specification
20
16
10
10
10
8
8
16
OIL SEAL 18X35X7 MATERIAL:- NBR/MS, Specific gravity:-1.22Gms/CC(ASTM D792),Hardness:- 70-75 Shore A degree(ASTM D 2240),Tensile Strength:- >102kg/sqcm(ASTM D 412),Elongation at break:->250%(ASTMD412), Withstand a temperatue of 100 Deg C. Make :- Max Spare(spareage)/Bombayoil seals/SS Ruber.
OIL SEAL 30X40X7 MATERIAL:- NBR/MS, Specific gravity:-1.22Gms/CC(ASTM D792),Hardness:- 70-75 Shore A degree(ASTM D 2240),Tensile Strength:- >102kg/sqcm(ASTM D 412),Elongation at break:->250%(ASTMD412), Withstand a temperatue of 100 Deg C. Make :- Max Spare(spareage)/Bombayoil seals/SS Ruber.
OIL SEAL 35x52x7 MATERIAL:- NBR/MS, Specific gravity:- 1.22Gms/CC(ASTMD792),Hardness:- 70-75 Shore A degree(ASTM D 2240), Tensile Strength:->102kg/sqcm(ASTM D 412),Elongation at break:->250%(ASTM D412), Withstand atemperatue of 100 Deg C. Make :- Max Spare(spareage)/Bombay oil seals/SS Ruber.
OIL SEAL 70X90X10 MATERIAL:- NBR/MS, Specific gravity:-1.22Gms/CC(ASTM D792),Hardness:- 70-75 Shore A degree(ASTM D 2240),Tensile Strength:- >102kg/sqcm(ASTM D 412),Elongation at break:->250%(ASTMD412), Withstand a temperatue of 100 Deg C. Make :- Max Spare(spareage)/Bombayoil seals/SS Ruber.
OIL SEAL 17X32X7 MATERIAL:- NBR/MS, Specific gravity:-1.22Gms/CC(ASTM D792),Hardness:- 70-75 Shore A degree(ASTM D 2240),Tensile Strength:- >102kg/sqcm(ASTM D 412),Elongation at break:->250%(ASTMD412), Withstand a temperatue of 100 Deg C. Make :- Max Spare(spareage)/Bombayoil seals/SS Ruber.
Size:104.14x5.33, Material:VITON-700 SHORE Hardness 70 to 75 deg. Tensilestrength-115 ksc min, Elogation at break-180% min, Compression test-24Hr/200 deg.C /20% max, (Withstand pressure 50 ksc & Temperature 200 deg.),Application:Boiler feed booster pump mechanical sealMAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS
Size:148.59x5.33, Material:VITON-700 SHORE Hardness 70 to 75 deg. Tensilestrength-115 ksc min, Elogation at break-180% min, Compression test-24Hr/200 deg.C /20% max, (Withstand pressure 50 ksc & Temperature 200 deg.),Application:Boiler feed pump mechanical sealMAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS
Size:164.69x3.53, Material:VITON-700 SHORE Hardness 70 to 75 deg. Tensilestrength-115 ksc min, Elogation at break-180% min, Compression test-24Hr/200 deg.
SlNo
Unit RequiredQuantity
NUMBERS
NUMBERS
NUMBERS
NUMBERS
NUMBERS
NUMBERS
NUMBERS
NUMBERS
8
9
10
11
12
13
14
15
( A GOVT. OF KARNATAKA ENTERPRISE )
GR142
OFFICE OF THE
PURCHASE ENQUIRY
SE(S&P)BTPS/EL/EETM/17-18/389 13/12/2017PURCHASE ENQUIRY NO : DATE :
31-JAN-18 11:14:24
5414201107
5414201115
5414201123
5414201131
5811501303
2430103132
2430103141
Item Code
O-RING 120.02X5.33
O-RING 215.27X5.33
O-RING 190.09X3.53
O-RING 179.7X5.33
SLEEVE O-RING
OIL SEAAL 35X50X10
OIL SEAL 50X70X10
Item Name/Specification
8
6
12
6
15
10
15
C /20% max, (Withstand pressure 50 ksc & Temperature 200 deg.),Application:Boiler feed pump mechanical sealMAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS
Size:120.02x5.33, Material:VITON-700 SHORE Hardness 70 to 75 deg. Tensilestrength-115 ksc min, Elogation at break-180% min, Compression test-24Hr/200 deg.C /20% max,(Withstand pressure 50 ksc & Temperature 200 deg.), Application:Boilerfeed pump mechanical sealMAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS
Size:215.27x5.33, Material:VITON-700 SHORE Hardness 70 to 75 deg. Tensilestrength-115 ksc min, Elogation at break-180% min, Compression test-24Hr/200 deg.C /20% max, (Withstand pressure 50 ksc & Temperature 200 deg.),Application:Boiler feed pump mechanical sealMAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS
Size:190.09x3.53, Material:VITON-700 SHORE Hardness 70 to 75 deg. Tensilestrength-115 ksc min, Elogation at break-180% min, Compression test-24Hr/200 deg.C /20% max, (Withstand pressure 50 ksc & Temperature 200 deg.),Application:Boiler feed pump mechanical sealMAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS
Size:179.7x5.33, Material:VITON-700 SHORE Hardness 70 to 75 deg. Tensilestrength-115 ksc min, Elogation at break-180% min, Compression test-24Hr/200 deg.C /20% max, (Withstand pressure 50 ksc & Temperature 200 deg.),Application:Boiler feed pump mechanical sealMAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS
ID=70MM,THICKNESS=3.25MM MAKE: Max Spare (spareage)/Bombay oil seals/SS Ruber
OIL SEAL 35X50X10 MATERIAL:- NBR/MS, Specific gravity:-1.22Gms/CC(ASTM D792),Hardness:- 70-75 Shore A degree(ASTM D 2240),Tensile Strength:- >102kg/sqcm(ASTM D 412),Elongation at break:->250%(ASTMD412), Withstand a temperatue of 100 Deg C. Make :- Max Spare(spareage)/Bombayoil seals/SS Ruber.
OIL SEAL 50X70X10 MATERIAL: NBR/MS,SPECIFIC GRAVITY: 1.22Gms/CC(ASTMD792), Hardness: 70-75 Shore A degree(ASTM D 2240), Tensile Strength : >102kg/sqcm(ASTM D 412),
SlNo
Unit RequiredQuantity
NUMBERS
NUMBERS
NUMBERS
NUMBERS
NUMBERS
NUMBERS
NUMBERS
16
17
18
19
20
21
22
( A GOVT. OF KARNATAKA ENTERPRISE )
GR142
OFFICE OF THE
PURCHASE ENQUIRY
SE(S&P)BTPS/EL/EETM/17-18/389 13/12/2017PURCHASE ENQUIRY NO : DATE :
31-JAN-18 11:14:24
2430201088
2430201134
2430201177
5310831044
5311505311
5311505329
5311505337
Item Code
VITON RUBBER CHORDS3.5MMC
VITON RUBBER CHORD 6.0MM
VITON RUBBER 8.0MM
QUAD RING (CF-FILTER ELEMENT)
O-RING SEAL KIT-201
O-RING SEAL KIT-202
O-RING SEAL KIT-204
Item Name/Specification
30
30
30
25
1
1
1
Elongation at break : >250%(ASTM D 412), Withstand a tempreature of 100 Deg C Make: Max Spare (spareage)/Bombay oil seals/SS Ruber.
VITON RUBBER CHORDS 3.5MM VITON-700 SHORE Hardness 70 to 75 deg.Tensile strength-115 ksc, Elogation at break-180% min, Compression test-24Hr/200deg. C /20% max, (Withstand the pressure 200 ksc & Temperature 200 deg.)MAKE:BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS
VITON-700 SHORE Hardness 70 to 75 deg. Tensile strength-115 ksc, Elogation atbreak-180% min, Compression test-24Hr/200 deg. C /20% max, (Withstand thepressure 200 ksc & Temperature 200 deg.) MAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS
VITONVITON-700 SHORE Hardness 70 to 75 deg. Tensile strength-115 ksc,Elogation at break-180% min, Compression test-24Hr/200 deg. C /20% max,(Withstand the pressure 200 ksc & Temperature 200 deg.)MAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS
QUAD RING , Size :- ID 73x83x5.3 mmMaterial:-VITON-700 SHORE Hardness 70 to 75 deg.C Tensile Strength-115 ksc min. Elongation at Break-180% min. Compression Test-24Hrs/200 deg.C/20% max. MEDIA USED: FYRQUEL-EHC-46. For HP/IP supply unit filter elementMAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS
Seal kit should consists of O-rings materil: VITONVITON-700 SHORE Hardness 70to 75 deg. Tensile strength-115 ksc, Elogation at break-180% min, Compression test-24Hr/200 deg. C /15-20% max, (Withstand the pressure 200 ksc & Temperature -30-200 deg.). Compatibility:Mineral oil, Bio oils, water soluble, MAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS
Seal kit should consists of O-rings materil: VITON-700 SHORE Hardness 70 to 75deg. Tensile strength-115 ksc, Elogation at break-180% min, Compression test-24Hr/200 deg. C /15-20% max, (Withstand the pressure 200 ksc & Temperature -30-200 deg.). Compatibility:Mineral oil, Bio oils, water soluble, water glycol fluids, allkinds of servo oils, Fyrquel oil etc., MAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS
Seal kit should consists of O-rings materil: VITON-700 SHORE Hardness 70 to 75deg. Tensile strength-115 ksc, Elogation at break-180% min, Compression test-
SlNo
Unit RequiredQuantity
METRES
METRES
METRES
NUMBERS
NUMBERS
NUMBERS
NUMBERS
23
24
25
26
27
28
29
( A GOVT. OF KARNATAKA ENTERPRISE )
GR142
OFFICE OF THE
PURCHASE ENQUIRY
SE(S&P)BTPS/EL/EETM/17-18/389 13/12/2017PURCHASE ENQUIRY NO : DATE :
31-JAN-18 11:14:24
5311505345
5312150303
5321503022
5410209022
5410210021
5410210039
Item Code
O-RING SEAL KIT-206
O-RING 68X5
O-RING 370X5
O' RING (250X8)
'O' RING (400X8)
O-RING 378X8
Item Name/Specification
1
20
8
6
6
6
24Hr/200 deg. C /15-20% max, (Withstand the pressure 200 ksc & Temperature -30-200 deg.). Compatibility:Mineral oil, Bio oils, water soluble, water glycol fluids, allkinds of servo oils, Fyrquel oil etc.,MAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS
Seal kit should consists of O-rings materil: VITON-700 SHORE Hardness 70 to 75deg. Tensile strength-115 ksc, Elogation at break-180% min, Compression test-24Hr/200 deg. C /15-20% max, (Withstand the pressure 200 ksc & Temperature -30-200 deg.). Compatibility:Mineral oil, Bio oils, water soluble, water glycol fluids, allkinds of servo oils, Fyrquel oil etc., MAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS
O-RING ID=68 TICK= 5MM, VITON-700 SHORE Hardness 70 to 75 deg. Tensilestrength-115 ksc, Elogation at break-180% min, Compression test-24Hr/200 deg. C/15-20% max, O-Rings required for Thrust bearing shell (Withstand the pressure 200ksc & Temperature 200 deg.)Make :- Max Spare(spareage)/Bombay oil seals/SSRuber.
O-RING ID=370 TICK= 5MM, VITON-700 SHORE Hardness 70 to 75 deg. Tensilestrength-115 ksc, Elogation at break-180% min, Compression test-24Hr/200 deg. C/15-20% max, O-Rings required for Thrust bearing shell (Withstand the pressure 200ksc & Temperature 200 deg.)Make :- Max Spare(spareage)/Bombay oil seals/SSRuber.
O RING 250mm X 8mm for MDBFP cooler. Matetial: Viton rubber-700 SHORE Hardness 70 to 75 deg. Tensile strength-115 kscmin, Elogation at break-180% min, Compression test-24Hr/200 deg. C /20% max,(Withstand pressure 50 ksc & Temperature 200 deg.) MAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS
Matetial: Viton rubber-700 SHORE Hardness 70 to 75 deg. Tensile strength-115 kscmin, Elogation at break-180% min, Compression test-24Hr/200 deg. C /20% max,(Withstand pressure 50 ksc & Temperature 200 deg.) for MDBFP cooler MAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS
Matetial: Viton rubber-700 SHORE Hardness 70 to 75 deg. Tensile strength-115 kscmin, Elogation at break-180% min, Compression test-24Hr/200 deg. C /20% max,(Withstand pressure 50 ksc & Temperature 200 deg.) Application:MDBFP coolerMAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS
SlNo
Unit RequiredQuantity
NUMBERS
NUMBERS
NUMBERS
NUMBERS
NUMBERS
NUMBERS
30
31
32
33
34
35
( A GOVT. OF KARNATAKA ENTERPRISE )
GR142
OFFICE OF THE
PURCHASE ENQUIRY
SE(S&P)BTPS/EL/EETM/17-18/389 13/12/2017PURCHASE ENQUIRY NO : DATE :
31-JAN-18 11:14:24
5414201000
5414201018
5414201026
5414201034
5414201042
5414201051
5414201069
Item Code
O-RING 202.87X2
O-RING 32.92X3.53
O-RING 40.87X3.53
O-RING 69.44X3.53
O-RING 114.2X5.7
O-RING 148.82X3.53
O-RING 82.14X3.53
Item Name/Specification
12
6
12
12
8
8
8
Size:202.87x2, Material:VITON-700 SHORE Hardness 70 to 75 deg. Tensilestrength-115 ksc min, Elogation at break-180% min, Compression test-24Hr/200 deg.C /20% max, (Withstand pressure 50 ksc & Temperature 200 deg.), Application:Maincontrol valve of TDBFP governing systemMAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS
Size:39.2x3.53, Material:VITON-700 SHORE Hardness 70 to 75 deg. Tensilestrength-115 ksc min, Elogation at break-180% min, Compression test-24Hr/200 deg.C /20% max, (Withstand pressure 50 ksc & Temperature 200 deg.), Application:Maincontrol valve of TDBFP governing systemMAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS
Size:40.87x3.53, Material:VITON-700 SHORE Hardness 70 to 75 deg. Tensilestrength-115 ksc min, Elogation at break-180% min, Compression test-24Hr/200 deg.C /20% max, (Withstand pressure 50 ksc & Temperature 200 deg.),Application:BFP/BP Mechanical seal skid magnetic filtersMAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS
Size:69.44x3.53, Material:VITON-700 SHORE Hardness 70 to 75 deg. Tensilestrength-115 ksc min, Elogation at break-180% min, Compression test-24Hr/200 deg.C /20% max, (Withstand pressure 50 ksc & Temperature 200 deg.),Application:BFP/BP Mechanical seal skid magnetic filtersMAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS
Size:114.2x5.7, Material:VITON-700 SHORE Hardness 70 to 75 deg. Tensilestrength-115 ksc min, Elogation at break-180% min, Compression test-24Hr/200 deg.C /20% max, (Withstand pressure 50 ksc & Temperature 200 deg.),Application:Boiler feed booster pump mechanical sealMAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS
Size:148.82x3.53, Material:VITON-700 SHORE Hardness 70 to 75 deg. Tensilestrength-115 ksc min, Elogation at break-180% min, Compression test-24Hr/200 deg.C /20% max,(Withstand pressure 50 ksc & Temperature 200 deg.), Application:Boilerfeed booster pump mechanical sealMAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS
Size:82.14x3.53, Material:VITON-700 SHORE Hardness 70 to 75 deg. Tensilestrength-115 ksc min, Elogation at break-180% min, Compression test-24Hr/200 deg.C /20% max, (Withstand pressure 50 ksc & Temperature 200 deg.),
SlNo
Unit RequiredQuantity
NUMBERS
NUMBERS
NUMBERS
NUMBERS
NUMBERS
NUMBERS
NUMBERS
36
37
38
39
40
41
42
( A GOVT. OF KARNATAKA ENTERPRISE )
GR142
OFFICE OF THE
PURCHASE ENQUIRY
SE(S&P)BTPS/EL/EETM/17-18/389 13/12/2017PURCHASE ENQUIRY NO : DATE :
31-JAN-18 11:14:24
Item Code Item Name/Specification
Application:Boiler feed booster pump mechanical sealMAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS
SlNo
Unit RequiredQuantity
Important Dates: 1 . Last date for receipt of quotations/tenders/offers :2 . Opening Date of quotations/tenders/offers :
23/02/2018 15:00
23/02/2018 15:30
Important Note: 1. Quotations/Tenders/Offers shall be in a sealed cover with following superscription. a) Purchase Enquiry Number and Date . b) Date of opening2. Bidders/Agencies shall invariably furnish valid TIN along with Quotations/Offers.3. Offers without valid TIN will not be considered for evaluation.
( A GOVT. OF KARNATAKA ENTERPRISE )
GR142
OFFICE OF THE
PURCHASE ENQUIRY
SE(S&P)BTPS/EL/EETM/17-18/389 13/12/2017PURCHASE ENQUIRY NO : DATE :
VALIDITY : The rates offered shall be valid for a period of 180 days from the date fixed for receipt oftender/quotation.
PRICES: The price shall be quoted per Unit exclusive of Taxes and duties. The following components ofthe rates shall also be mentioned. a) F.O.R , b) Discount if any, c) GST d) Freight , e) item wise HSNcode.
TERMS OF PAYMENT : 100% Payment with full taxes & duties as per actuals after receipt andacceptance of materials at site. If any other mode of payment is insisted/mentioned by the supplier,corporation reserves the right of loading the additional cost to arrive at the landed cost which may pleasebe noted.
QUANTITY : The quantity mentioned in the enquiry is subjected to variation depending on the finalrequirements and Purchase order condition.
GUARANTEE / WARRANTY : The materials shall be guaranteed for a period of 12 months from thedate of commissioning or 18 months from the date of dispatch whichever is earlier against manufacturingdefects/bad workmanship. During this period any defects noticed shall be replaced free of cost at sitewithout waiting for settlement of claims.
PENALTY : For delay in delivery of material beyond the stipulated delivery period, penalty @ 0.5 % perweek subject to a maximum of 5% of value of the delayed quantity shall be applicable.
QUALITY : If the materials supplied are found to be substandard, the materials will be rejected and actionwill be taken as per conditions of purchase order. Materials should be made of best quality in accordancewith the specification duly indicating IS Code, Make , Brand etc.
DEALERSHIP CERTIFICATE : Copy of valid dealership certificate shall be enclosed whereverapplicable. Copies of purchase orders placed by other TPS/ Companies shall be enclosed along with offer.
TRANSPORT: Material shall be transported only through reputed transporters on door delivery basis.
1
2
3
4
5
6
7
8
9
Terms and Conditions of Enquiry:
31-JAN-18 11:14:24
( A GOVT. OF KARNATAKA ENTERPRISE )
GR142
OFFICE OF THE
PURCHASE ENQUIRY
SE(S&P)BTPS/EL/EETM/17-18/389 13/12/2017PURCHASE ENQUIRY NO : DATE :
For KARNATAKA POWER CORPORATION LIMITED
Yours Faithfully
SUPERINDENTING ENGINEER(S&P)BTBELLARY THERMAL POWER STATION, KPCLKUDTHINI, PIN-583152Phone 9448290584 Fax 8392288616 Mail [email protected]
EARNEST MONEY DEPOSIT: If the quoted value is more than Rs. 50000.00(Fifty Thousand Only)then 1% of the quoted value shall be furnished in the form of DD/BG drawn in favour of Deputy GeneralManager (Finance)- BT, BTPS, Karnataka Power Corporation Limited, Kudathini - 583152, from anynationlised / Scheduled Bank with minimum validity of 3(Three) months in a seperate sealed cover.Exemption Certificate for EMD/SD issued by NSIC or by any State Govt or Central Govt will beconsidered.
AGREEMENT: An agreement shall be executed by the supplier ( as per KPCL format) immediately afterreceipt and acceptance of Purchase Order on pre-paid stamped duty paper Worth of Rs 100.00 beforeeffecting supply. E.M.D. will be forfeited if the supplier fails to supply the materials after acceptance /placing of purchase order.
SECURITY DEPOSIT: If the landing cost of the purchase order exceeds Rs.50000.00 (Fifty Thousand),then 5% of the landing cost shall be furnished as SD in the form of DD or BG issued from anyNationalized/Scheduled Bank and it shall be valid for the entire contract/guarantee period before effectingthe supply.
DELIVERY PERIOD: The materials shall be delivered within 30 days from the date of issue of purchaseorder.
SUIT OR PROCEEDINGS: Any Legal suit arising out of the contract shall be initiated exclusives in thelaw court at Bellary, Karnataka State only.
F O R AND CONSIGNEE: The material shall be delivered through reputed transporters on Door deliverybasis to BTPS Stores, KPCL, Kudathini, which is situated on NH-63 approximately 24 Km from Bellaryat the following address : Consignee:The Executive Engineer(Stores)BT,Bellary Thermal PowerStation,Karnataka Power Corporation Ltd.,Kudathini -583 152,Bellary - Dist., Karnataka - State,Mobileno.: 9448290750, Fax No.: 08392 288616
10
11
12
13
14
15
31-JAN-18 11:14:24
Sir, Please send your quotation/offer with terms and conditions for the materials specified in the table below.
2430103019
2430103027
2430103035
2430103043
2430103051
2430103060
2430103078
Item Code
OIL SEAL 30X16X17
OIL SEAL 12.7X21.5X7
OIL SEAL 15X24X7
OIL SEAL 40X55X7
OIL SEAL 22X35X7
OIL SEAL 25X35X7
OIL SEAL 20X40X10
Item Name/Specification
10
50
10
6
40
40
10
OIL SEAL 30x16x17 MATERIAL:- NBR/MS, Specific gravity:-1.22Gms/CC(ASTM D792),Hardness:- 70-75 Shore A degree(ASTM D 2240),Tensile Strength:- >102kg/sqcm(ASTM D 412),Elongation at break:->250%(ASTMD412), Withstand a temperatue of 100 Deg C. Make :- Max Spare(spareage)/Bombayoil seals/SS Ruber.
OIL SEAL 12.7X21.5X7 MATERIAL:- NBR/MS, Specific gravity:-1.22Gms/CC(ASTM D792),Hardness:- 70-75 Shore A degree(ASTM D 2240),Tensile Strength:- >102kg/sqcm(ASTM D 412),Elongation at break:->250%(ASTMD412), Withstand a temperatue of 100 Deg C. Make :- Max Spare(spareage)/Bombayoil seals/SS Ruber.
OIL SEAL 15X24X7 MATERIAL:- NBR/MS, Specific gravity:-1.22Gms/CC(ASTM D792),Hardness:- 70-75 Shore A degree(ASTM D 2240),Tensile Strength:- >102kg/sqcm(ASTM D 412),Elongation at break:->250%(ASTMD412), Withstand a temperatue of 100 Deg C. Make :- Max Spare(spareage)/Bombayoil seals/SS Ruber.
OIL SEAL 40X55X7 MATERIAL:- NBR/MS, Specific gravity:-1.22Gms/CC(ASTM D792),Hardness:- 70-75 Shore A degree(ASTM D 2240),Tensile Strength:- >102kg/sqcm(ASTM D 412),Elongation at break:->250%(ASTMD412), Withstand a temperatue of 100 Deg C. Make :- Max Spare(spareage)/Bombayoil seals/SS Ruber.
OIL SEAL 22X35X7 MATERIAL:- NBR/MS, Specific gravity:-1.22Gms/CC(ASTM D792),Hardness:- 70-75 Shore A degree(ASTM D 2240),Tensile Strength:- >102kg/sqcm(ASTM D 412),Elongation at break:->250%(ASTMD412), Withstand a temperatue of 100 Deg C. Make :- Max Spare(spareage)/Bombayoil seals/SS Ruber.
OIL SEAL 25X35X7 MATERIAL:- NBR/MS, Specific gravity:-1.22Gms/CC(ASTM D792),Hardness:- 70-75 Shore A degree(ASTM D 2240),Tensile Strength:- >102kg/sqcm(ASTM D 412),Elongation at break:->250%(ASTMD412), Withstand a temperatue of 100 Deg C. Make :- Max Spare(spareage)/Bombayoil seals/SS Ruber.
OIL SEAL 20X40X10 MATERIAL:- NBR/MS, Specific gravity:-1.22Gms/CC(ASTM D792),Hardness:- 70-75 Shore A degree(ASTM D 2240),Tensile Strength:- >102kg/sqcm(ASTM D 412),Elongation at break:->250%(ASTMD412), Withstand a temperatue of 100 Deg C. Make :- Max Spare(spareage)/Bombayoil seals/SS Ruber.
SlNo
Unit RequiredQuantity
NUMBERS
NUMBERS
NUMBERS
NUMBERS
NUMBERS
NUMBERS
NUMBERS
1
2
3
4
5
6
7
( A GOVT. OF KARNATAKA ENTERPRISE )
GR142
OFFICE OF THE
PURCHASE ENQUIRY
SE(S&P)BTPS/EL/EETM/17-18/389 13/12/2017PURCHASE ENQUIRY NO : DATE :
31-JAN-18 11:14:24
2430103086
2430103094
2430103108
2430103116
2430103124
5414201077
5414201085
5414201093
Item Code
OIL SEAL 18X35X7
OIL SEAL 30X40X7
OIL SEL 35X52X 7
OIL SEALL 70X90X10
OIL SEAL 17X32X7
O-RING 104.14X5.33
O-RING 148.59X5.33
O-RING 164.69X3.53
Item Name/Specification
20
16
10
10
10
8
8
16
OIL SEAL 18X35X7 MATERIAL:- NBR/MS, Specific gravity:-1.22Gms/CC(ASTM D792),Hardness:- 70-75 Shore A degree(ASTM D 2240),Tensile Strength:- >102kg/sqcm(ASTM D 412),Elongation at break:->250%(ASTMD412), Withstand a temperatue of 100 Deg C. Make :- Max Spare(spareage)/Bombayoil seals/SS Ruber.
OIL SEAL 30X40X7 MATERIAL:- NBR/MS, Specific gravity:-1.22Gms/CC(ASTM D792),Hardness:- 70-75 Shore A degree(ASTM D 2240),Tensile Strength:- >102kg/sqcm(ASTM D 412),Elongation at break:->250%(ASTMD412), Withstand a temperatue of 100 Deg C. Make :- Max Spare(spareage)/Bombayoil seals/SS Ruber.
OIL SEAL 35x52x7 MATERIAL:- NBR/MS, Specific gravity:- 1.22Gms/CC(ASTMD792),Hardness:- 70-75 Shore A degree(ASTM D 2240), Tensile Strength:->102kg/sqcm(ASTM D 412),Elongation at break:->250%(ASTM D412), Withstand atemperatue of 100 Deg C. Make :- Max Spare(spareage)/Bombay oil seals/SS Ruber.
OIL SEAL 70X90X10 MATERIAL:- NBR/MS, Specific gravity:-1.22Gms/CC(ASTM D792),Hardness:- 70-75 Shore A degree(ASTM D 2240),Tensile Strength:- >102kg/sqcm(ASTM D 412),Elongation at break:->250%(ASTMD412), Withstand a temperatue of 100 Deg C. Make :- Max Spare(spareage)/Bombayoil seals/SS Ruber.
OIL SEAL 17X32X7 MATERIAL:- NBR/MS, Specific gravity:-1.22Gms/CC(ASTM D792),Hardness:- 70-75 Shore A degree(ASTM D 2240),Tensile Strength:- >102kg/sqcm(ASTM D 412),Elongation at break:->250%(ASTMD412), Withstand a temperatue of 100 Deg C. Make :- Max Spare(spareage)/Bombayoil seals/SS Ruber.
Size:104.14x5.33, Material:VITON-700 SHORE Hardness 70 to 75 deg. Tensilestrength-115 ksc min, Elogation at break-180% min, Compression test-24Hr/200 deg.C /20% max, (Withstand pressure 50 ksc & Temperature 200 deg.),Application:Boiler feed booster pump mechanical sealMAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS
Size:148.59x5.33, Material:VITON-700 SHORE Hardness 70 to 75 deg. Tensilestrength-115 ksc min, Elogation at break-180% min, Compression test-24Hr/200 deg.C /20% max, (Withstand pressure 50 ksc & Temperature 200 deg.),Application:Boiler feed pump mechanical sealMAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS
Size:164.69x3.53, Material:VITON-700 SHORE Hardness 70 to 75 deg. Tensilestrength-115 ksc min, Elogation at break-180% min, Compression test-24Hr/200 deg.
SlNo
Unit RequiredQuantity
NUMBERS
NUMBERS
NUMBERS
NUMBERS
NUMBERS
NUMBERS
NUMBERS
NUMBERS
8
9
10
11
12
13
14
15
( A GOVT. OF KARNATAKA ENTERPRISE )
GR142
OFFICE OF THE
PURCHASE ENQUIRY
SE(S&P)BTPS/EL/EETM/17-18/389 13/12/2017PURCHASE ENQUIRY NO : DATE :
31-JAN-18 11:14:24
5414201107
5414201115
5414201123
5414201131
5811501303
2430103132
2430103141
Item Code
O-RING 120.02X5.33
O-RING 215.27X5.33
O-RING 190.09X3.53
O-RING 179.7X5.33
SLEEVE O-RING
OIL SEAAL 35X50X10
OIL SEAL 50X70X10
Item Name/Specification
8
6
12
6
15
10
15
C /20% max, (Withstand pressure 50 ksc & Temperature 200 deg.),Application:Boiler feed pump mechanical sealMAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS
Size:120.02x5.33, Material:VITON-700 SHORE Hardness 70 to 75 deg. Tensilestrength-115 ksc min, Elogation at break-180% min, Compression test-24Hr/200 deg.C /20% max,(Withstand pressure 50 ksc & Temperature 200 deg.), Application:Boilerfeed pump mechanical sealMAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS
Size:215.27x5.33, Material:VITON-700 SHORE Hardness 70 to 75 deg. Tensilestrength-115 ksc min, Elogation at break-180% min, Compression test-24Hr/200 deg.C /20% max, (Withstand pressure 50 ksc & Temperature 200 deg.),Application:Boiler feed pump mechanical sealMAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS
Size:190.09x3.53, Material:VITON-700 SHORE Hardness 70 to 75 deg. Tensilestrength-115 ksc min, Elogation at break-180% min, Compression test-24Hr/200 deg.C /20% max, (Withstand pressure 50 ksc & Temperature 200 deg.),Application:Boiler feed pump mechanical sealMAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS
Size:179.7x5.33, Material:VITON-700 SHORE Hardness 70 to 75 deg. Tensilestrength-115 ksc min, Elogation at break-180% min, Compression test-24Hr/200 deg.C /20% max, (Withstand pressure 50 ksc & Temperature 200 deg.),Application:Boiler feed pump mechanical sealMAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS
ID=70MM,THICKNESS=3.25MM MAKE: Max Spare (spareage)/Bombay oil seals/SS Ruber
OIL SEAL 35X50X10 MATERIAL:- NBR/MS, Specific gravity:-1.22Gms/CC(ASTM D792),Hardness:- 70-75 Shore A degree(ASTM D 2240),Tensile Strength:- >102kg/sqcm(ASTM D 412),Elongation at break:->250%(ASTMD412), Withstand a temperatue of 100 Deg C. Make :- Max Spare(spareage)/Bombayoil seals/SS Ruber.
OIL SEAL 50X70X10 MATERIAL: NBR/MS,SPECIFIC GRAVITY: 1.22Gms/CC(ASTMD792), Hardness: 70-75 Shore A degree(ASTM D 2240), Tensile Strength : >102kg/sqcm(ASTM D 412),
SlNo
Unit RequiredQuantity
NUMBERS
NUMBERS
NUMBERS
NUMBERS
NUMBERS
NUMBERS
NUMBERS
16
17
18
19
20
21
22
( A GOVT. OF KARNATAKA ENTERPRISE )
GR142
OFFICE OF THE
PURCHASE ENQUIRY
SE(S&P)BTPS/EL/EETM/17-18/389 13/12/2017PURCHASE ENQUIRY NO : DATE :
31-JAN-18 11:14:24
2430201088
2430201134
2430201177
5310831044
5311505311
5311505329
5311505337
Item Code
VITON RUBBER CHORDS3.5MMC
VITON RUBBER CHORD 6.0MM
VITON RUBBER 8.0MM
QUAD RING (CF-FILTER ELEMENT)
O-RING SEAL KIT-201
O-RING SEAL KIT-202
O-RING SEAL KIT-204
Item Name/Specification
30
30
30
25
1
1
1
Elongation at break : >250%(ASTM D 412), Withstand a tempreature of 100 Deg C Make: Max Spare (spareage)/Bombay oil seals/SS Ruber.
VITON RUBBER CHORDS 3.5MM VITON-700 SHORE Hardness 70 to 75 deg.Tensile strength-115 ksc, Elogation at break-180% min, Compression test-24Hr/200deg. C /20% max, (Withstand the pressure 200 ksc & Temperature 200 deg.)MAKE:BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS
VITON-700 SHORE Hardness 70 to 75 deg. Tensile strength-115 ksc, Elogation atbreak-180% min, Compression test-24Hr/200 deg. C /20% max, (Withstand thepressure 200 ksc & Temperature 200 deg.) MAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS
VITONVITON-700 SHORE Hardness 70 to 75 deg. Tensile strength-115 ksc,Elogation at break-180% min, Compression test-24Hr/200 deg. C /20% max,(Withstand the pressure 200 ksc & Temperature 200 deg.)MAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS
QUAD RING , Size :- ID 73x83x5.3 mmMaterial:-VITON-700 SHORE Hardness 70 to 75 deg.C Tensile Strength-115 ksc min. Elongation at Break-180% min. Compression Test-24Hrs/200 deg.C/20% max. MEDIA USED: FYRQUEL-EHC-46. For HP/IP supply unit filter elementMAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS
Seal kit should consists of O-rings materil: VITONVITON-700 SHORE Hardness 70to 75 deg. Tensile strength-115 ksc, Elogation at break-180% min, Compression test-24Hr/200 deg. C /15-20% max, (Withstand the pressure 200 ksc & Temperature -30-200 deg.). Compatibility:Mineral oil, Bio oils, water soluble, MAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS
Seal kit should consists of O-rings materil: VITON-700 SHORE Hardness 70 to 75deg. Tensile strength-115 ksc, Elogation at break-180% min, Compression test-24Hr/200 deg. C /15-20% max, (Withstand the pressure 200 ksc & Temperature -30-200 deg.). Compatibility:Mineral oil, Bio oils, water soluble, water glycol fluids, allkinds of servo oils, Fyrquel oil etc., MAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS
Seal kit should consists of O-rings materil: VITON-700 SHORE Hardness 70 to 75deg. Tensile strength-115 ksc, Elogation at break-180% min, Compression test-
SlNo
Unit RequiredQuantity
METRES
METRES
METRES
NUMBERS
NUMBERS
NUMBERS
NUMBERS
23
24
25
26
27
28
29
( A GOVT. OF KARNATAKA ENTERPRISE )
GR142
OFFICE OF THE
PURCHASE ENQUIRY
SE(S&P)BTPS/EL/EETM/17-18/389 13/12/2017PURCHASE ENQUIRY NO : DATE :
31-JAN-18 11:14:24
5311505345
5312150303
5321503022
5410209022
5410210021
5410210039
Item Code
O-RING SEAL KIT-206
O-RING 68X5
O-RING 370X5
O' RING (250X8)
'O' RING (400X8)
O-RING 378X8
Item Name/Specification
1
20
8
6
6
6
24Hr/200 deg. C /15-20% max, (Withstand the pressure 200 ksc & Temperature -30-200 deg.). Compatibility:Mineral oil, Bio oils, water soluble, water glycol fluids, allkinds of servo oils, Fyrquel oil etc.,MAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS
Seal kit should consists of O-rings materil: VITON-700 SHORE Hardness 70 to 75deg. Tensile strength-115 ksc, Elogation at break-180% min, Compression test-24Hr/200 deg. C /15-20% max, (Withstand the pressure 200 ksc & Temperature -30-200 deg.). Compatibility:Mineral oil, Bio oils, water soluble, water glycol fluids, allkinds of servo oils, Fyrquel oil etc., MAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS
O-RING ID=68 TICK= 5MM, VITON-700 SHORE Hardness 70 to 75 deg. Tensilestrength-115 ksc, Elogation at break-180% min, Compression test-24Hr/200 deg. C/15-20% max, O-Rings required for Thrust bearing shell (Withstand the pressure 200ksc & Temperature 200 deg.)Make :- Max Spare(spareage)/Bombay oil seals/SSRuber.
O-RING ID=370 TICK= 5MM, VITON-700 SHORE Hardness 70 to 75 deg. Tensilestrength-115 ksc, Elogation at break-180% min, Compression test-24Hr/200 deg. C/15-20% max, O-Rings required for Thrust bearing shell (Withstand the pressure 200ksc & Temperature 200 deg.)Make :- Max Spare(spareage)/Bombay oil seals/SSRuber.
O RING 250mm X 8mm for MDBFP cooler. Matetial: Viton rubber-700 SHORE Hardness 70 to 75 deg. Tensile strength-115 kscmin, Elogation at break-180% min, Compression test-24Hr/200 deg. C /20% max,(Withstand pressure 50 ksc & Temperature 200 deg.) MAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS
Matetial: Viton rubber-700 SHORE Hardness 70 to 75 deg. Tensile strength-115 kscmin, Elogation at break-180% min, Compression test-24Hr/200 deg. C /20% max,(Withstand pressure 50 ksc & Temperature 200 deg.) for MDBFP cooler MAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS
Matetial: Viton rubber-700 SHORE Hardness 70 to 75 deg. Tensile strength-115 kscmin, Elogation at break-180% min, Compression test-24Hr/200 deg. C /20% max,(Withstand pressure 50 ksc & Temperature 200 deg.) Application:MDBFP coolerMAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS
SlNo
Unit RequiredQuantity
NUMBERS
NUMBERS
NUMBERS
NUMBERS
NUMBERS
NUMBERS
30
31
32
33
34
35
( A GOVT. OF KARNATAKA ENTERPRISE )
GR142
OFFICE OF THE
PURCHASE ENQUIRY
SE(S&P)BTPS/EL/EETM/17-18/389 13/12/2017PURCHASE ENQUIRY NO : DATE :
31-JAN-18 11:14:24
5414201000
5414201018
5414201026
5414201034
5414201042
5414201051
5414201069
Item Code
O-RING 202.87X2
O-RING 32.92X3.53
O-RING 40.87X3.53
O-RING 69.44X3.53
O-RING 114.2X5.7
O-RING 148.82X3.53
O-RING 82.14X3.53
Item Name/Specification
12
6
12
12
8
8
8
Size:202.87x2, Material:VITON-700 SHORE Hardness 70 to 75 deg. Tensilestrength-115 ksc min, Elogation at break-180% min, Compression test-24Hr/200 deg.C /20% max, (Withstand pressure 50 ksc & Temperature 200 deg.), Application:Maincontrol valve of TDBFP governing systemMAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS
Size:39.2x3.53, Material:VITON-700 SHORE Hardness 70 to 75 deg. Tensilestrength-115 ksc min, Elogation at break-180% min, Compression test-24Hr/200 deg.C /20% max, (Withstand pressure 50 ksc & Temperature 200 deg.), Application:Maincontrol valve of TDBFP governing systemMAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS
Size:40.87x3.53, Material:VITON-700 SHORE Hardness 70 to 75 deg. Tensilestrength-115 ksc min, Elogation at break-180% min, Compression test-24Hr/200 deg.C /20% max, (Withstand pressure 50 ksc & Temperature 200 deg.),Application:BFP/BP Mechanical seal skid magnetic filtersMAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS
Size:69.44x3.53, Material:VITON-700 SHORE Hardness 70 to 75 deg. Tensilestrength-115 ksc min, Elogation at break-180% min, Compression test-24Hr/200 deg.C /20% max, (Withstand pressure 50 ksc & Temperature 200 deg.),Application:BFP/BP Mechanical seal skid magnetic filtersMAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS
Size:114.2x5.7, Material:VITON-700 SHORE Hardness 70 to 75 deg. Tensilestrength-115 ksc min, Elogation at break-180% min, Compression test-24Hr/200 deg.C /20% max, (Withstand pressure 50 ksc & Temperature 200 deg.),Application:Boiler feed booster pump mechanical sealMAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS
Size:148.82x3.53, Material:VITON-700 SHORE Hardness 70 to 75 deg. Tensilestrength-115 ksc min, Elogation at break-180% min, Compression test-24Hr/200 deg.C /20% max,(Withstand pressure 50 ksc & Temperature 200 deg.), Application:Boilerfeed booster pump mechanical sealMAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS
Size:82.14x3.53, Material:VITON-700 SHORE Hardness 70 to 75 deg. Tensilestrength-115 ksc min, Elogation at break-180% min, Compression test-24Hr/200 deg.C /20% max, (Withstand pressure 50 ksc & Temperature 200 deg.),
SlNo
Unit RequiredQuantity
NUMBERS
NUMBERS
NUMBERS
NUMBERS
NUMBERS
NUMBERS
NUMBERS
36
37
38
39
40
41
42
( A GOVT. OF KARNATAKA ENTERPRISE )
GR142
OFFICE OF THE
PURCHASE ENQUIRY
SE(S&P)BTPS/EL/EETM/17-18/389 13/12/2017PURCHASE ENQUIRY NO : DATE :
31-JAN-18 11:14:24
Item Code Item Name/Specification
Application:Boiler feed booster pump mechanical sealMAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS
SlNo
Unit RequiredQuantity
Important Dates: 1 . Last date for receipt of quotations/tenders/offers :2 . Opening Date of quotations/tenders/offers :
23/02/2018 15:00
23/02/2018 15:30
Important Note: 1. Quotations/Tenders/Offers shall be in a sealed cover with following superscription. a) Purchase Enquiry Number and Date . b) Date of opening2. Bidders/Agencies shall invariably furnish valid TIN along with Quotations/Offers.3. Offers without valid TIN will not be considered for evaluation.
( A GOVT. OF KARNATAKA ENTERPRISE )
GR142
OFFICE OF THE
PURCHASE ENQUIRY
SE(S&P)BTPS/EL/EETM/17-18/389 13/12/2017PURCHASE ENQUIRY NO : DATE :
VALIDITY : The rates offered shall be valid for a period of 180 days from the date fixed for receipt oftender/quotation.
PRICES: The price shall be quoted per Unit exclusive of Taxes and duties. The following components ofthe rates shall also be mentioned. a) F.O.R , b) Discount if any, c) GST d) Freight , e) item wise HSNcode.
TERMS OF PAYMENT : 100% Payment with full taxes & duties as per actuals after receipt andacceptance of materials at site. If any other mode of payment is insisted/mentioned by the supplier,corporation reserves the right of loading the additional cost to arrive at the landed cost which may pleasebe noted.
QUANTITY : The quantity mentioned in the enquiry is subjected to variation depending on the finalrequirements and Purchase order condition.
GUARANTEE / WARRANTY : The materials shall be guaranteed for a period of 12 months from thedate of commissioning or 18 months from the date of dispatch whichever is earlier against manufacturingdefects/bad workmanship. During this period any defects noticed shall be replaced free of cost at sitewithout waiting for settlement of claims.
PENALTY : For delay in delivery of material beyond the stipulated delivery period, penalty @ 0.5 % perweek subject to a maximum of 5% of value of the delayed quantity shall be applicable.
QUALITY : If the materials supplied are found to be substandard, the materials will be rejected and actionwill be taken as per conditions of purchase order. Materials should be made of best quality in accordancewith the specification duly indicating IS Code, Make , Brand etc.
DEALERSHIP CERTIFICATE : Copy of valid dealership certificate shall be enclosed whereverapplicable. Copies of purchase orders placed by other TPS/ Companies shall be enclosed along with offer.
TRANSPORT: Material shall be transported only through reputed transporters on door delivery basis.
1
2
3
4
5
6
7
8
9
Terms and Conditions of Enquiry:
31-JAN-18 11:14:24
( A GOVT. OF KARNATAKA ENTERPRISE )
GR142
OFFICE OF THE
PURCHASE ENQUIRY
SE(S&P)BTPS/EL/EETM/17-18/389 13/12/2017PURCHASE ENQUIRY NO : DATE :
For KARNATAKA POWER CORPORATION LIMITED
Yours Faithfully
SUPERINDENTING ENGINEER(S&P)BTBELLARY THERMAL POWER STATION, KPCLKUDTHINI, PIN-583152Phone 9448290584 Fax 8392288616 Mail [email protected]
EARNEST MONEY DEPOSIT: If the quoted value is more than Rs. 50000.00(Fifty Thousand Only)then 1% of the quoted value shall be furnished in the form of DD/BG drawn in favour of Deputy GeneralManager (Finance)- BT, BTPS, Karnataka Power Corporation Limited, Kudathini - 583152, from anynationlised / Scheduled Bank with minimum validity of 3(Three) months in a seperate sealed cover.Exemption Certificate for EMD/SD issued by NSIC or by any State Govt or Central Govt will beconsidered.
AGREEMENT: An agreement shall be executed by the supplier ( as per KPCL format) immediately afterreceipt and acceptance of Purchase Order on pre-paid stamped duty paper Worth of Rs 100.00 beforeeffecting supply. E.M.D. will be forfeited if the supplier fails to supply the materials after acceptance /placing of purchase order.
SECURITY DEPOSIT: If the landing cost of the purchase order exceeds Rs.50000.00 (Fifty Thousand),then 5% of the landing cost shall be furnished as SD in the form of DD or BG issued from anyNationalized/Scheduled Bank and it shall be valid for the entire contract/guarantee period before effectingthe supply.
DELIVERY PERIOD: The materials shall be delivered within 30 days from the date of issue of purchaseorder.
SUIT OR PROCEEDINGS: Any Legal suit arising out of the contract shall be initiated exclusives in thelaw court at Bellary, Karnataka State only.
F O R AND CONSIGNEE: The material shall be delivered through reputed transporters on Door deliverybasis to BTPS Stores, KPCL, Kudathini, which is situated on NH-63 approximately 24 Km from Bellaryat the following address : Consignee:The Executive Engineer(Stores)BT,Bellary Thermal PowerStation,Karnataka Power Corporation Ltd.,Kudathini -583 152,Bellary - Dist., Karnataka - State,Mobileno.: 9448290750, Fax No.: 08392 288616
10
11
12
13
14
15
31-JAN-18 11:14:24
Sir, Please send your quotation/offer with terms and conditions for the materials specified in the table below.
1218012295
1301100163
1304011145
1304011242
1304011251
1304011269
1304032177
1309062414
1400001975
1400001983
Item Code
PVC FLEXIBLE CONDUIT PIPES 1"
PLUG TOP 16A
2X28W ELECTRONICBALLAST T5 FTL
6A SOCKET
16A SWITCH
16A SOCKET
CHOKES HPMV 125WATT
28W T5 LAMPS
MCB PROTECTED SOCKET-16 AMPS
5 PIN SOCKET & GANG BOX-16A
Item Name/Specification
100
100
100
150
30
30
25
800
20
250
PVC FLEXIBLE CONDUIT PIPESSIZE:1"MAKE: MODI/POLYCAB/FINOLEX
Delux plug top 16A CONA Make code no:1991.
2X28W AC SUPPLIED ELECTRONIC BALLAST FOR T5 FTLMODEL: BJHF 228 P WARM START SUITABLE FOR FTL LAMPNote:All electrical parameters, mounting arrangements should match with existingtype BJHF 228 P of BajajMAKE: BAJAJ/Equivalent
Five in one socket 6A,screw type, make: havells/ancor/lisha/cona.
Single pole switch 16A,screw type, make: havells/ancor/lisha/cona.
Five in one socket 16A,screw type, make: havells/anchor/lisha/cona.
MAKE: BAJAJ.
28 Watts fluorescent tube light to be suitale for 28W T5 fittingProduct:FTL 18W Power Lux 6500KBase:G5Rated Lumens:2760Watts:28WRated voltage: 230V, 50HzLength:1163.2mmMake:BAJAJ/Havells/CGL only
MCB protected socket and plug with metal gang box (Sheet steel enclosure)for surface mountingCurrent rating: 16 AmpsMake: Siemens/Haavells/Anchor
5 Pin heavy duty socket & switch with metal gang box( sheet steel enclosure)with fuse and phase indicating lamp
SlNo
Unit RequiredQuantity
METRES
NUMBERS
NUMBERS
NUMBERS
NUMBERS
NUMBERS
NUMBERS
NUMBERS
NUMBERS
NUMBERS
1
2
3
4
5
6
7
8
9
10
( A GOVT. OF KARNATAKA ENTERPRISE )
GR142
OFFICE OF THE
PURCHASE ENQUIRY
SE(S&P)BTPS/EL/EEPS/17-18/390 13/12/2017PURCHASE ENQUIRY NO : DATE :
31-JAN-18 11:14:24
1450021021
4622111115
4631321017
4638121072
5712301114
Item Code
MCB BOX 2 WAY
6A SOCKET SWITCH GANG BOX
6A 3 PIN PLUG TOP
6A SP SWITCH
TIMER FOR HIGHMAST
Item Name/Specification
100
50
100
200
5
Current rating: 16 AmopsMake: Siemens/Havells/Anchor
PLASTIC MCB BOX 2 WAY
MAKE: LISHA/ANCHOR/CONA
2 in 1 SS, 6A switch and 6A 5in 1 SOCKET WITH GANG BOXMAKE: CONA/LISHA/ANCHOR/HAVELLS
6A 3 PIN PLUG TOPMAKE: HAVELLS/CONA/ELLE/GM
6A SINGLE POLE SWITCHMAKE: CONA/GM/HAVELLS
FM/1 QuartzType: QT dailyVoltage: 240 VACcontact rating: 16A/250VACproduct code: J648B1make: General Industrial Control Pvt Ltd
SlNo
Unit RequiredQuantity
NUMBERS
NUMBERS
NUMBERS
NUMBERS
NUMBERS
11
12
13
14
15
Important Dates: 1 . Last date for receipt of quotations/tenders/offers :2 . Opening Date of quotations/tenders/offers :
23/02/2018 15:00
23/02/2018 15:30
Important Note: 1. Quotations/Tenders/Offers shall be in a sealed cover with following superscription. a) Purchase Enquiry Number and Date . b) Date of opening2. Bidders/Agencies shall invariably furnish valid TIN along with Quotations/Offers.3. Offers without valid TIN will not be considered for evaluation.
( A GOVT. OF KARNATAKA ENTERPRISE )
GR142
OFFICE OF THE
PURCHASE ENQUIRY
SE(S&P)BTPS/EL/EEPS/17-18/390 13/12/2017PURCHASE ENQUIRY NO : DATE :
VALIDITY : The rates offered shall be valid for a period of 180 days from the date fixed for receipt oftender/quotation.
PRICES: The price shall be quoted per Unit exclusive of Taxes and duties. The following components ofthe rates shall also be mentioned. a) F.O.R , b) Discount if any, c) GST d) Freight , e) item wise HSNcode.
TERMS OF PAYMENT : 100% Payment with full taxes & duties as per actuals after receipt andacceptance of materials at site. If any other mode of payment is insisted/mentioned by the supplier,corporation reserves the right of loading the additional cost to arrive at the landed cost which may please
1
2
3
Terms and Conditions of Enquiry:
31-JAN-18 11:14:24
( A GOVT. OF KARNATAKA ENTERPRISE )
GR142
OFFICE OF THE
PURCHASE ENQUIRY
SE(S&P)BTPS/EL/EEPS/17-18/390 13/12/2017PURCHASE ENQUIRY NO : DATE :
be noted.
QUANTITY : The quantity mentioned in the enquiry is subjected to variation depending on the finalrequirements and Purchase order condition.
GUARANTEE / WARRANTY : The materials shall be guaranteed for a period of 12 months from thedate of commissioning or 18 months from the date of dispatch whichever is earlier against manufacturingdefects/bad workmanship. During this period any defects noticed shall be replaced free of cost at sitewithout waiting for settlement of claims.
PENALTY : For delay in delivery of material beyond the stipulated delivery period, penalty @ 0.5 % perweek subject to a maximum of 5% of value of the delayed quantity shall be applicable.
QUALITY : If the materials supplied are found to be substandard, the materials will be rejected and actionwill be taken as per conditions of purchase order. Materials should be made of best quality in accordancewith the specification duly indicating IS Code, Make , Brand etc.
DEALERSHIP CERTIFICATE : Copy of valid dealership certificate shall be enclosed whereverapplicable. Copies of purchase orders placed by other TPS/ Companies shall be enclosed along with offer.
TRANSPORT: Material shall be transported only through reputed transporters on door delivery basis.
EARNEST MONEY DEPOSIT: If the quoted value is more than Rs. 50000.00(Fifty Thousand Only)then 1% of the quoted value shall be furnished in the form of DD/BG drawn in favour of Deputy GeneralManager (Finance)- BT, BTPS, Karnataka Power Corporation Limited, Kudathini - 583152, from anynationlised / Scheduled Bank with minimum validity of 3(Three) months in a seperate sealed cover.Exemption Certificate for EMD/SD issued by NSIC or by any State Govt or Central Govt will beconsidered.
AGREEMENT: An agreement shall be executed by the supplier ( as per KPCL format) immediately afterreceipt and acceptance of Purchase Order on pre-paid stamped duty paper Worth of Rs 100.00 beforeeffecting supply. E.M.D. will be forfeited if the supplier fails to supply the materials after acceptance /placing of purchase order.
SECURITY DEPOSIT: If the landing cost of the purchase order exceeds Rs.50000.00 (Fifty Thousand),then 5% of the landing cost shall be furnished as SD in the form of DD or BG issued from anyNationalized/Scheduled Bank and it shall be valid for the entire contract/guarantee period before effectingthe supply.
DELIVERY PERIOD: The materials shall be delivered within 30 days from the date of issue of purchaseorder.
SUIT OR PROCEEDINGS: Any Legal suit arising out of the contract shall be initiated exclusives in thelaw court at Bellary, Karnataka State only.
F O R AND CONSIGNEE: The material shall be delivered through reputed transporters on Door deliverybasis to BTPS Stores, KPCL, Kudathini, which is situated on NH-63 approximately 24 Km from Bellaryat the following address : Consignee: The Executive Engineer(Stores)BT,Bellary Thermal Power Station,Karnataka Power
4
5
6
7
8
9
10
11
12
13
14
15
31-JAN-18 11:14:24
( A GOVT. OF KARNATAKA ENTERPRISE )
GR142
OFFICE OF THE
PURCHASE ENQUIRY
SE(S&P)BTPS/EL/EEPS/17-18/390 13/12/2017PURCHASE ENQUIRY NO : DATE :
For KARNATAKA POWER CORPORATION LIMITED
Yours Faithfully
SUPERINDENTING ENGINEER(S&P)BTBELLARY THERMAL POWER STATION, KPCLKUDTHINI, PIN-583152Phone 9448290584 Fax 8392288616 Mail [email protected]
Corporation Ltd., Kudathini -583 152, Bellary - Dist., Karnataka - State, Mobile no.: 9448290750, Fax No.: 08392 288616
31-JAN-18 11:14:24
Sir, Please send your quotation/offer with terms and conditions for the materials specified in the table below.
5715701024
Item Code
OIL GUN ADV. LIMIT SWITCH
Item Name/Specification
20OIL GUN ENGAGE LIMIT SWITCHSpec: Push button type Model:SZL-WL-F, 10A 300V AC, 6A 24V DC Make: Honeywell
SlNo
Unit RequiredQuantity
NUMBERS1
Important Dates: 1 . Last date for receipt of quotations/tenders/offers :2 . Opening Date of quotations/tenders/offers :
23/02/2018 15:00
23/02/2018 15:30
Important Note: 1. Quotations/Tenders/Offers shall be in a sealed cover with following superscription. a) Purchase Enquiry Number and Date . b) Date of opening2. Bidders/Agencies shall invariably furnish valid TIN along with Quotations/Offers.3. Offers without valid TIN will not be considered for evaluation.
( A GOVT. OF KARNATAKA ENTERPRISE )
GR142
OFFICE OF THE
PURCHASE ENQUIRY
SE(S&P)BTPS/EL/EEIC1/17-18/391 13/12/2017PURCHASE ENQUIRY NO : DATE :
Bidder shall be original equipment manufacturer (OEM) OR Original equipment supplier (OES) ORAuthorized dealer and shall furnish copy of OEM authorization certificate as a documentary proof.
Bidder should have supplied similar materials to any Industrial / Power utilities as a proof the PO copy shallbe submitted along with the offer
The firm shall submit original guarantee certificate from the manufacturer
1
2
3
Pre Qualification Requirements:
VALIDITY : The rates offered shall be valid for a period of 180 days from the date fixed for receipt oftender/quotation.
PRICES: The price shall be quoted per Unit exclusive of Taxes and duties. The following components ofthe rates shall also be mentioned. a) F.O.R , b) Discount if any, c) GST d) Freight , e) item wise HSNcode.
TERMS OF PAYMENT : 100% Payment with full taxes & duties as per actuals after receipt andacceptance of materials at site. If any other mode of payment is insisted/mentioned by the supplier,corporation reserves the right of loading the additional cost to arrive at the landed cost which may pleasebe noted.
1
2
3
Terms and Conditions of Enquiry:
31-JAN-18 11:14:24
( A GOVT. OF KARNATAKA ENTERPRISE )
GR142
OFFICE OF THE
PURCHASE ENQUIRY
SE(S&P)BTPS/EL/EEIC1/17-18/391 13/12/2017PURCHASE ENQUIRY NO : DATE :
QUANTITY : The quantity mentioned in the enquiry is subjected to variation depending on the finalrequirements and Purchase order condition.
GUARANTEE / WARRANTY : The materials shall be guaranteed for a period of 12 months from thedate of commissioning or 18 months from the date of dispatch whichever is earlier against manufacturingdefects/bad workmanship. During this period any defects noticed shall be replaced free of cost at sitewithout waiting for settlement of claims.
PENALTY : For delay in delivery of material beyond the stipulated delivery period, penalty @ 0.5 % perweek subject to a maximum of 5% of value of the delayed quantity shall be applicable.
QUALITY : If the materials supplied are found to be substandard, the materials will be rejected and actionwill be taken as per conditions of purchase order. Materials should be made of best quality in accordancewith the specification duly indicating IS Code, Make , Brand etc.
DEALERSHIP CERTIFICATE : Copy of valid dealership certificate shall be enclosed whereverapplicable. Copies of purchase orders placed by other TPS/ Companies shall be enclosed along with offer.
TRANSPORT: Material shall be transported only through reputed transporters on door delivery basis.
EARNEST MONEY DEPOSIT: If the quoted value is more than Rs. 50000.00(Fifty Thousand Only)then 1% of the quoted value shall be furnished in the form of DD/BG drawn in favour of Deputy GeneralManager (Finance)- BT, BTPS, Karnataka Power Corporation Limited, Kudathini - 583152, from anynationlised / Scheduled Bank with minimum validity of 3(Three) months in a seperate sealed cover.Exemption Certificate for EMD/SD issued by NSIC or by any State Govt or Central Govt will beconsidered.
AGREEMENT: An agreement shall be executed by the supplier ( as per KPCL format) immediately afterreceipt and acceptance of Purchase Order on pre-paid stamped duty paper Worth of Rs 100.00 beforeeffecting supply. E.M.D. will be forfeited if the supplier fails to supply the materials after acceptance /placing of purchase order.
SECURITY DEPOSIT: If the landing cost of the purchase order exceeds Rs.50000.00 (Fifty Thousand),then 5% of the landing cost shall be furnished as SD in the form of DD or BG issued from anyNationalized/Scheduled Bank and it shall be valid for the entire contract/guarantee period before effectingthe supply.
DELIVERY PERIOD: The materials shall be delivered within 30 days from the date of issue of purchaseorder.
SUIT OR PROCEEDINGS: Any Legal suit arising out of the contract shall be initiated exclusives in thelaw court at Bellary, Karnataka State only.
F O R AND CONSIGNEE: The material shall be delivered through reputed transporters on Door deliverybasis to BTPS Stores, KPCL, Kudathini, which is situated on NH-63 approximately 24 Km from Bellaryat the following address : Consignee: The Executive Engineer(Stores)BT,Bellary Thermal Power Station,Karnataka PowerCorporation Ltd.,Kudathini -583 152,Bellary - Dist., Karnataka - State,Mobile no.: 9448290750, Fax No.:08392 288616
4
5
6
7
8
9
10
11
12
13
14
15
31-JAN-18 11:14:24
( A GOVT. OF KARNATAKA ENTERPRISE )
GR142
OFFICE OF THE
PURCHASE ENQUIRY
SE(S&P)BTPS/EL/EEIC1/17-18/391 13/12/2017PURCHASE ENQUIRY NO : DATE :
For KARNATAKA POWER CORPORATION LIMITED
Yours Faithfully
SUPERINDENTING ENGINEER(S&P)BTBELLARY THERMAL POWER STATION, KPCLKUDTHINI, PIN-583152Phone 9448290584 Fax 8392288616 Mail [email protected]
31-JAN-18 11:14:24
Sir, Please send your quotation/offer with terms and conditions for the materials specified in the table below.
5715701024
Item Code
OIL GUN ADV. LIMIT SWITCH
Item Name/Specification
20OIL GUN ENGAGE LIMIT SWITCHSpec: Push button type Model:SZL-WL-F, 10A 300V AC, 6A 24V DC Make: Honeywell
SlNo
Unit RequiredQuantity
NUMBERS1
Important Dates: 1 . Last date for receipt of quotations/tenders/offers :2 . Opening Date of quotations/tenders/offers :
23/02/2018 15:00
23/02/2018 15:30
Important Note: 1. Quotations/Tenders/Offers shall be in a sealed cover with following superscription. a) Purchase Enquiry Number and Date . b) Date of opening2. Bidders/Agencies shall invariably furnish valid TIN along with Quotations/Offers.3. Offers without valid TIN will not be considered for evaluation.
( A GOVT. OF KARNATAKA ENTERPRISE )
GR142
OFFICE OF THE
PURCHASE ENQUIRY
SE(S&P)BTPS/EL/EEIC1/17-18/391 13/12/2017PURCHASE ENQUIRY NO : DATE :
VALIDITY : The rates offered shall be valid for a period of 180 days from the date fixed for receipt oftender/quotation.
PRICES: The price shall be quoted per Unit exclusive of Taxes and duties. The following components ofthe rates shall also be mentioned. a) F.O.R , b) Discount if any, c) GST d) Freight , e) item wise HSNcode.
TERMS OF PAYMENT : 100% Payment with full taxes & duties as per actuals after receipt andacceptance of materials at site. If any other mode of payment is insisted/mentioned by the supplier,corporation reserves the right of loading the additional cost to arrive at the landed cost which may pleasebe noted.
QUANTITY : The quantity mentioned in the enquiry is subjected to variation depending on the finalrequirements and Purchase order condition.
GUARANTEE / WARRANTY : The materials shall be guaranteed for a period of 12 months from thedate of commissioning or 18 months from the date of dispatch whichever is earlier against manufacturingdefects/bad workmanship. During this period any defects noticed shall be replaced free of cost at sitewithout waiting for settlement of claims.
PENALTY : For delay in delivery of material beyond the stipulated delivery period, penalty @ 0.5 % perweek subject to a maximum of 5% of value of the delayed quantity shall be applicable.
1
2
3
4
5
6
Terms and Conditions of Enquiry:
31-JAN-18 11:14:24
( A GOVT. OF KARNATAKA ENTERPRISE )
GR142
OFFICE OF THE
PURCHASE ENQUIRY
SE(S&P)BTPS/EL/EEIC1/17-18/391 13/12/2017PURCHASE ENQUIRY NO : DATE :
For KARNATAKA POWER CORPORATION LIMITED
Yours Faithfully
SUPERINDENTING ENGINEER(S&P)BTBELLARY THERMAL POWER STATION, KPCLKUDTHINI, PIN-583152Phone 9448290584 Fax 8392288616 Mail [email protected]
QUALITY : If the materials supplied are found to be substandard, the materials will be rejected and actionwill be taken as per conditions of purchase order. Materials should be made of best quality in accordancewith the specification duly indicating IS Code, Make , Brand etc.
DEALERSHIP CERTIFICATE : Copy of valid dealership certificate shall be enclosed whereverapplicable. Copies of purchase orders placed by other TPS/ Companies shall be enclosed along with offer.
TRANSPORT: Material shall be transported only through reputed transporters on door delivery basis.
EARNEST MONEY DEPOSIT: If the quoted value is more than Rs. 50000.00(Fifty Thousand Only)then 1% of the quoted value shall be furnished in the form of DD/BG drawn in favour of Deputy GeneralManager (Finance)- BT, BTPS, Karnataka Power Corporation Limited, Kudathini - 583152, from anynationlised / Scheduled Bank with minimum validity of 3(Three) months in a seperate sealed cover.Exemption Certificate for EMD/SD issued by NSIC or by any State Govt or Central Govt will beconsidered.
AGREEMENT: An agreement shall be executed by the supplier ( as per KPCL format) immediately afterreceipt and acceptance of Purchase Order on pre-paid stamped duty paper Worth of Rs 100.00 beforeeffecting supply. E.M.D. will be forfeited if the supplier fails to supply the materials after acceptance /placing of purchase order.
SECURITY DEPOSIT: If the landing cost of the purchase order exceeds Rs.50000.00 (Fifty Thousand),then 5% of the landing cost shall be furnished as SD in the form of DD or BG issued from anyNationalized/Scheduled Bank and it shall be valid for the entire contract/guarantee period before effectingthe supply.
DELIVERY PERIOD: The materials shall be delivered within 30 days from the date of issue of purchaseorder.
SUIT OR PROCEEDINGS: Any Legal suit arising out of the contract shall be initiated exclusives in thelaw court at Bellary, Karnataka State only.
F O R AND CONSIGNEE: The material shall be delivered through reputed transporters on Door deliverybasis to BTPS Stores, KPCL, Kudathini, which is situated on NH-63 approximately 24 Km from Bellaryat the following address : Consignee: The Executive Engineer(Stores)BT,Bellary Thermal Power Station,Karnataka PowerCorporation Ltd.,Kudathini -583 152,Bellary - Dist., Karnataka - State,Mobile no.: 9448290750, Fax No.:08392 288616
7
8
9
10
11
12
13
14
15
31-JAN-18 11:14:24
Sir, Please send your quotation/offer with terms and conditions for the materials specified in the table below.
5714915012
5714915021
Item Code
FLOW INDICATOR FOR AS/H2S SO
RING RELIEF OIL FLW INDICATOR
Item Name/Specification
2
4
FLOW INDICATOR FOR AS/H2S SEAL OIL FLOWSPEC:Metal tube with tapered measuring section End to end length= 250mm,DN:50MM,PN=40KSC Flanged end connection ASME B16.5,class 150 Tube, Float and Flange material- SS316 RANGE 0 TO 110 LPM, Medium:Turbine oil with SG=0.852 Viscosity=29cst,temp=50degc SERVICE:Air side/Hydrogen side seal oil flow indication at seal oil skid. Model:H250/RR/M7 Make: Krohne Marshall Pvt. Ltd, Pune.
Flow indicator for ring relief oil flowspec:Metal tube with tapered measuring section End to end length= 250mm,DN:25MM,PN=40KSC Flanged end connection with outer dia:115mm 4 holes of dia 14mm equally spaced on PCD 85mm Tube, Float and Flange material- SS316 RANGE 0 TO 16.42 LPM, Medium:Turbine oil with SG=0.852 Viscosity=29cst,temp=50degc SERVICE:Ring relief seal oil flow indication at seal oil skid. Model:38090 Make: Instrumentation Engineers PVt. LTd.,Jeedimetla,Hyderabad.
SlNo
Unit RequiredQuantity
NUMBERS
NUMBERS
1
2
Important Dates: 1 . Last date for receipt of quotations/tenders/offers :2 . Opening Date of quotations/tenders/offers :
23/02/2018 15:00
23/02/2018 15:30
Important Note: 1. Quotations/Tenders/Offers shall be in a sealed cover with following superscription. a) Purchase Enquiry Number and Date . b) Date of opening2. Bidders/Agencies shall invariably furnish valid TIN along with Quotations/Offers.3. Offers without valid TIN will not be considered for evaluation.
( A GOVT. OF KARNATAKA ENTERPRISE )
GR142
OFFICE OF THE
PURCHASE ENQUIRY
SE(S&P)BTPS/EL/EEIC1/17-18/392 13/12/2017PURCHASE ENQUIRY NO : DATE :
Terms and Conditions of Enquiry:
31-JAN-18 11:14:24
( A GOVT. OF KARNATAKA ENTERPRISE )
GR142
OFFICE OF THE
PURCHASE ENQUIRY
SE(S&P)BTPS/EL/EEIC1/17-18/392 13/12/2017PURCHASE ENQUIRY NO : DATE :
VALIDITY : The rates offered shall be valid for a period of 180 days from the date fixed for receipt oftender/quotation.
PRICES: The price shall be quoted per Unit exclusive of Taxes and duties. The following components ofthe rates shall also be mentioned. a) F.O.R , b) Discount if any, c) GST d) Freight , e) item wise HSNcode.
TERMS OF PAYMENT : 100% Payment with full taxes & duties as per actuals after receipt andacceptance of materials at site. If any other mode of payment is insisted/mentioned by the supplier,corporation reserves the right of loading the additional cost to arrive at the landed cost which may pleasebe noted.
QUANTITY : The quantity mentioned in the enquiry is subjected to variation depending on the finalrequirements and Purchase order condition.
GUARANTEE / WARRANTY : The materials shall be guaranteed for a period of 12 months from thedate of commissioning or 18 months from the date of dispatch whichever is earlier against manufacturingdefects/bad workmanship. During this period any defects noticed shall be replaced free of cost at sitewithout waiting for settlement of claims.
PENALTY : For delay in delivery of material beyond the stipulated delivery period, penalty @ 0.5 % perweek subject to a maximum of 5% of value of the delayed quantity shall be applicable.
QUALITY : If the materials supplied are found to be substandard, the materials will be rejected and actionwill be taken as per conditions of purchase order. Materials should be made of best quality in accordancewith the specification duly indicating IS Code, Make , Brand etc.
DEALERSHIP CERTIFICATE : Copy of valid dealership certificate shall be enclosed whereverapplicable. Copies of purchase orders placed by other TPS/ Companies shall be enclosed along with offer.
TRANSPORT: Material shall be transported only through reputed transporters on door delivery basis.
EARNEST MONEY DEPOSIT: If the quoted value is more than Rs. 50000.00(Fifty Thousand Only)then 1% of the quoted value shall be furnished in the form of DD/BG drawn in favour of Deputy GeneralManager (Finance)- BT, BTPS, Karnataka Power Corporation Limited, Kudathini - 583152, from anynationlised / Scheduled Bank with minimum validity of 3(Three) months in a seperate sealed cover.Exemption Certificate for EMD/SD issued by NSIC or by any State Govt or Central Govt will beconsidered.
AGREEMENT: An agreement shall be executed by the supplier ( as per KPCL format) immediately afterreceipt and acceptance of Purchase Order on pre-paid stamped duty paper Worth of Rs 100.00 beforeeffecting supply. E.M.D. will be forfeited if the supplier fails to supply the materials after acceptance /placing of purchase order.
SECURITY DEPOSIT: If the landing cost of the purchase order exceeds Rs.50000.00 (Fifty Thousand),then 5% of the landing cost shall be furnished as SD in the form of DD or BG issued from anyNationalized/Scheduled Bank and it shall be valid for the entire contract/guarantee period before effectingthe supply.
1
2
3
4
5
6
7
8
9
10
11
12
31-JAN-18 11:14:24
( A GOVT. OF KARNATAKA ENTERPRISE )
GR142
OFFICE OF THE
PURCHASE ENQUIRY
SE(S&P)BTPS/EL/EEIC1/17-18/392 13/12/2017PURCHASE ENQUIRY NO : DATE :
For KARNATAKA POWER CORPORATION LIMITED
Yours Faithfully
SUPERINDENTING ENGINEER(S&P)BTBELLARY THERMAL POWER STATION, KPCLKUDTHINI, PIN-583152Phone 9448290584 Fax 8392288616 Mail [email protected]
DELIVERY PERIOD: The materials shall be delivered within 30 days from the date of issue of purchaseorder.
SUIT OR PROCEEDINGS: Any Legal suit arising out of the contract shall be initiated exclusives in thelaw court at Bellary, Karnataka State only.
F O R AND CONSIGNEE: The material shall be delivered through reputed transporters on Door deliverybasis to BTPS Stores, KPCL, Kudathini, which is situated on NH-63 approximately 24 Km from Bellaryat the following address : Consignee: The Executive Engineer(Stores)BT,Bellary Thermal PowerStation,Karnataka Power Corporation Ltd.,Kudathini -583 152, Bellary - Dist., Karnataka - State,Mobile no.: 9448290750, Fax No.: 08392 288616
13
14
15
31-JAN-18 11:14:24
Sir, Please send your quotation/offer with terms and conditions for the materials specified in the table below.
5714915012
5714915021
Item Code
FLOW INDICATOR FOR AS/H2S SO
RING RELIEF OIL FLW INDICATOR
Item Name/Specification
2
4
FLOW INDICATOR FOR AS/H2S SEAL OIL FLOWSPEC:Metal tube with tapered measuring section End to end length= 250mm,DN:50MM,PN=40KSC Flanged end connection ASME B16.5,class 150 Tube, Float and Flange material- SS316 RANGE 0 TO 110 LPM, Medium:Turbine oil with SG=0.852 Viscosity=29cst,temp=50degc SERVICE:Air side/Hydrogen side seal oil flow indication at seal oil skid. Model:H250/RR/M7 Make: Krohne Marshall Pvt. Ltd, Pune.
Flow indicator for ring relief oil flowspec:Metal tube with tapered measuring section End to end length= 250mm,DN:25MM,PN=40KSC Flanged end connection with outer dia:115mm 4 holes of dia 14mm equally spaced on PCD 85mm Tube, Float and Flange material- SS316 RANGE 0 TO 16.42 LPM, Medium:Turbine oil with SG=0.852 Viscosity=29cst,temp=50degc SERVICE:Ring relief seal oil flow indication at seal oil skid. Model:38090 Make: Instrumentation Engineers PVt. LTd.,Jeedimetla,Hyderabad.
SlNo
Unit RequiredQuantity
NUMBERS
NUMBERS
1
2
Important Dates: 1 . Last date for receipt of quotations/tenders/offers :2 . Opening Date of quotations/tenders/offers :
23/02/2018 15:00
23/02/2018 15:30
Important Note: 1. Quotations/Tenders/Offers shall be in a sealed cover with following superscription. a) Purchase Enquiry Number and Date . b) Date of opening2. Bidders/Agencies shall invariably furnish valid TIN along with Quotations/Offers.3. Offers without valid TIN will not be considered for evaluation.
( A GOVT. OF KARNATAKA ENTERPRISE )
GR142
OFFICE OF THE
PURCHASE ENQUIRY
SE(S&P)BTPS/EL/EEIC1/17-18/392 13/12/2017PURCHASE ENQUIRY NO : DATE :
Terms and Conditions of Enquiry:
31-JAN-18 11:14:24
( A GOVT. OF KARNATAKA ENTERPRISE )
GR142
OFFICE OF THE
PURCHASE ENQUIRY
SE(S&P)BTPS/EL/EEIC1/17-18/392 13/12/2017PURCHASE ENQUIRY NO : DATE :
VALIDITY : The rates offered shall be valid for a period of 180 days from the date fixed for receipt oftender/quotation.
PRICES: The price shall be quoted per Unit exclusive of Taxes and duties. The following components ofthe rates shall also be mentioned. a) F.O.R , b) Discount if any, c) GST d) Freight , e) item wise HSNcode.
TERMS OF PAYMENT : 100% Payment with full taxes & duties as per actuals after receipt andacceptance of materials at site. If any other mode of payment is insisted/mentioned by the supplier,corporation reserves the right of loading the additional cost to arrive at the landed cost which may pleasebe noted.
QUANTITY : The quantity mentioned in the enquiry is subjected to variation depending on the finalrequirements and Purchase order condition.
GUARANTEE / WARRANTY : The materials shall be guaranteed for a period of 12 months from thedate of commissioning or 18 months from the date of dispatch whichever is earlier against manufacturingdefects/bad workmanship. During this period any defects noticed shall be replaced free of cost at sitewithout waiting for settlement of claims.
PENALTY : For delay in delivery of material beyond the stipulated delivery period, penalty @ 0.5 % perweek subject to a maximum of 5% of value of the delayed quantity shall be applicable.
QUALITY : If the materials supplied are found to be substandard, the materials will be rejected and actionwill be taken as per conditions of purchase order. Materials should be made of best quality in accordancewith the specification duly indicating IS Code, Make , Brand etc.
DEALERSHIP CERTIFICATE : Copy of valid dealership certificate shall be enclosed whereverapplicable. Copies of purchase orders placed by other TPS/ Companies shall be enclosed along with offer.
TRANSPORT: Material shall be transported only through reputed transporters on door delivery basis.
EARNEST MONEY DEPOSIT: If the quoted value is more than Rs. 50000.00(Fifty Thousand Only)then 1% of the quoted value shall be furnished in the form of DD/BG drawn in favour of Deputy GeneralManager (Finance)- BT, BTPS, Karnataka Power Corporation Limited, Kudathini - 583152, from anynationlised / Scheduled Bank with minimum validity of 3(Three) months in a seperate sealed cover.Exemption Certificate for EMD/SD issued by NSIC or by any State Govt or Central Govt will beconsidered.
AGREEMENT: An agreement shall be executed by the supplier ( as per KPCL format) immediately afterreceipt and acceptance of Purchase Order on pre-paid stamped duty paper Worth of Rs 100.00 beforeeffecting supply. E.M.D. will be forfeited if the supplier fails to supply the materials after acceptance /placing of purchase order.
SECURITY DEPOSIT: If the landing cost of the purchase order exceeds Rs.50000.00 (Fifty Thousand),then 5% of the landing cost shall be furnished as SD in the form of DD or BG issued from anyNationalized/Scheduled Bank and it shall be valid for the entire contract/guarantee period before effectingthe supply.
1
2
3
4
5
6
7
8
9
10
11
12
31-JAN-18 11:14:24
( A GOVT. OF KARNATAKA ENTERPRISE )
GR142
OFFICE OF THE
PURCHASE ENQUIRY
SE(S&P)BTPS/EL/EEIC1/17-18/392 13/12/2017PURCHASE ENQUIRY NO : DATE :
For KARNATAKA POWER CORPORATION LIMITED
Yours Faithfully
SUPERINDENTING ENGINEER(S&P)BTBELLARY THERMAL POWER STATION, KPCLKUDTHINI, PIN-583152Phone 9448290584 Fax 8392288616 Mail [email protected]
DELIVERY PERIOD: The materials shall be delivered within 30 days from the date of issue of purchaseorder.
SUIT OR PROCEEDINGS: Any Legal suit arising out of the contract shall be initiated exclusives in thelaw court at Bellary, Karnataka State only.
F O R AND CONSIGNEE: The material shall be delivered through reputed transporters on Door deliverybasis to BTPS Stores, KPCL, Kudathini, which is situated on NH-63 approximately 24 Km from Bellaryat the following address : Consignee: The Executive Engineer(Stores)BT,Bellary Thermal PowerStation,Karnataka Power Corporation Ltd.,Kudathini -583 152, Bellary - Dist., Karnataka - State,Mobile no.: 9448290750, Fax No.: 08392 288616
13
14
15
31-JAN-18 11:14:24
Sir, Please send your quotation/offer with terms and conditions for the materials specified in the table below.
5715504016
Item Code
I/P CONVERTER WITH VOL BOOSTER
Item Name/Specification
15Supply pressure : Atleast 0.7 bar above maximum output pressure / 1.5 KSC.Input : 4-20mA dc.Output Pressure range : 0.2 to 1.0 bar.Flow capacity : Upto 300Nl/min (10scfm).(With volume booster)Connections : ¼ inch NPT female standard (plus two integral ¼ inch NPT gaugeports).Mounting : Integral surface mounting bracket to be provided for vertical mounting.Accuracy : Linearity < 1.0%.Response time : < 8 secs.Low power consumption : < 0.25 watts.Operating temperature range : -20 Deg.C to +70 Deg.C.Total error : Max error +/- 0.5% of Span.Temperature effect : Better than 1% span between -10 Deg.C to 60 Deg.C .Ingress Protection : IP65.Vibration immune.Weather proof.
SlNo
Unit RequiredQuantity
NUMBERS1
Important Dates: 1 . Last date for receipt of quotations/tenders/offers :2 . Opening Date of quotations/tenders/offers :
23/02/2018 15:00
23/02/2018 15:30
Important Note: 1. Quotations/Tenders/Offers shall be in a sealed cover with following superscription. a) Purchase Enquiry Number and Date . b) Date of opening2. Bidders/Agencies shall invariably furnish valid TIN along with Quotations/Offers.3. Offers without valid TIN will not be considered for evaluation.
( A GOVT. OF KARNATAKA ENTERPRISE )
GR142
OFFICE OF THE
PURCHASE ENQUIRY
SE(S&P)BTPS/EL/EEIC1/17-18/395 13/12/2017PURCHASE ENQUIRY NO : DATE :
Bidder shall be original equipment manufacturer (OEM) or Original equipment supplier (OES) orAuthorized dealer and shall furnish copy of OEM authorization as a documentary proof.
Bidder should have supplied similar materials to any Industrial/Power utilities as a proof the PO copy shallbe submitted alomg with the offer .
The firm shall submit original guarantee certificate from the manufacturer.
4
5
6
VALIDITY : The rates offered shall be valid for a period of 180 days from the date fixed for receipt oftender/quotation.
1
Terms and Conditions of Enquiry:
31-JAN-18 11:14:24
( A GOVT. OF KARNATAKA ENTERPRISE )
GR142
OFFICE OF THE
PURCHASE ENQUIRY
SE(S&P)BTPS/EL/EEIC1/17-18/395 13/12/2017PURCHASE ENQUIRY NO : DATE :
PRICES: The price shall be quoted per Unit exclusive of Taxes and duties. The following components ofthe rates shall also be mentioned. a) F.O.R , b) Discount if any, c) GST d) Freight , e) item wise HSNcode.
TERMS OF PAYMENT : 100% Payment with full taxes & duties as per actuals after receipt andacceptance of materials at site. If any other mode of payment is insisted/mentioned by the supplier,corporation reserves the right of loading the additional cost to arrive at the landed cost which may pleasebe noted.
QUANTITY : The quantity mentioned in the enquiry is subjected to variation depending on the finalrequirements and Purchase order condition.
GUARANTEE / WARRANTY : The materials shall be guaranteed for a period of 12 months from thedate of commissioning or 18 months from the date of dispatch whichever is earlier against manufacturingdefects/bad workmanship. During this period any defects noticed shall be replaced free of cost at sitewithout waiting for settlement of claims.
PENALTY : For delay in delivery of material beyond the stipulated delivery period, penalty @ 0.5 % perweek subject to a maximum of 5% of value of the delayed quantity shall be applicable.
QUALITY : If the materials supplied are found to be substandard, the materials will be rejected and actionwill be taken as per conditions of purchase order. Materials should be made of best quality in accordancewith the specification duly indicating IS Code, Make , Brand etc.
DEALERSHIP CERTIFICATE : Copy of valid dealership certificate shall be enclosed whereverapplicable. Copies of purchase orders placed by other TPS/ Companies shall be enclosed along with offer.
TRANSPORT: Material shall be transported only through reputed transporters on door delivery basis.
EARNEST MONEY DEPOSIT: If the quoted value is more than Rs. 50000.00(Fifty Thousand Only)then 1% of the quoted value shall be furnished in the form of DD/BG drawn in favour of Deputy GeneralManager (Finance)- BT, BTPS, Karnataka Power Corporation Limited, Kudathini - 583152, from anynationlised / Scheduled Bank with minimum validity of 3(Three) months in a seperate sealed cover.Exemption Certificate for EMD/SD issued by NSIC or by any State Govt or Central Govt will beconsidered.
AGREEMENT: An agreement shall be executed by the supplier ( as per KPCL format) immediately afterreceipt and acceptance of Purchase Order on pre-paid stamped duty paper Worth of Rs 100.00 beforeeffecting supply. E.M.D. will be forfeited if the supplier fails to supply the materials after acceptance /placing of purchase order.
SECURITY DEPOSIT: If the landing cost of the purchase order exceeds Rs.50000.00 (Fifty Thousand),then 5% of the landing cost shall be furnished as SD in the form of DD or BG issued from anyNationalized/Scheduled Bank and it shall be valid for the entire contract/guarantee period before effectingthe supply.
DELIVERY PERIOD: The materials shall be delivered within 30 days from the date of issue of purchaseorder.
2
3
4
5
6
7
8
9
10
11
12
13
31-JAN-18 11:14:24
( A GOVT. OF KARNATAKA ENTERPRISE )
GR142
OFFICE OF THE
PURCHASE ENQUIRY
SE(S&P)BTPS/EL/EEIC1/17-18/395 13/12/2017PURCHASE ENQUIRY NO : DATE :
For KARNATAKA POWER CORPORATION LIMITED
Yours Faithfully
SUPERINDENTING ENGINEER(S&P)BTBELLARY THERMAL POWER STATION, KPCLKUDTHINI, PIN-583152Phone 9448290584 Fax 8392288616 Mail [email protected]
SUIT OR PROCEEDINGS: Any Legal suit arising out of the contract shall be initiated exclusives in thelaw court at Bellary, Karnataka State only.
F O R AND CONSIGNEE: The material shall be delivered through reputed transporters on Door deliverybasis to BTPS Stores, KPCL, Kudathini, which is situated on NH-63 approximately 24 Km from Bellaryat the following address :Consignee:The Executive Engineer(Stores)BT,Bellary Thermal PowerStation,Karnataka Power Corporation Ltd., Kudathini -583 152,Bellary - Dist., Karnataka - State,Mobile no.: 9448290750, Fax No.: 08392 288616
14
15
31-JAN-18 11:14:24
Sir, Please send your quotation/offer with terms and conditions for the materials specified in the table below.
5715504016
Item Code
I/P CONVERTER WITH VOL BOOSTER
Item Name/Specification
15Supply pressure : Atleast 0.7 bar above maximum output pressure / 1.5 KSC.Input : 4-20mA dc.Output Pressure range : 0.2 to 1.0 bar.Flow capacity : Upto 300Nl/min (10scfm).(With volume booster)Connections : ¼ inch NPT female standard (plus two integral ¼ inch NPT gaugeports).Mounting : Integral surface mounting bracket to be provided for vertical mounting.Accuracy : Linearity < 1.0%.Response time : < 8 secs.Low power consumption : < 0.25 watts.Operating temperature range : -20 Deg.C to +70 Deg.C.Total error : Max error +/- 0.5% of Span.Temperature effect : Better than 1% span between -10 Deg.C to 60 Deg.C .Ingress Protection : IP65.Vibration immune.Weather proof.
SlNo
Unit RequiredQuantity
NUMBERS1
Important Dates: 1 . Last date for receipt of quotations/tenders/offers :2 . Opening Date of quotations/tenders/offers :
23/02/2018 15:00
23/02/2018 15:30
Important Note: 1. Quotations/Tenders/Offers shall be in a sealed cover with following superscription. a) Purchase Enquiry Number and Date . b) Date of opening2. Bidders/Agencies shall invariably furnish valid TIN along with Quotations/Offers.3. Offers without valid TIN will not be considered for evaluation.
( A GOVT. OF KARNATAKA ENTERPRISE )
GR142
OFFICE OF THE
PURCHASE ENQUIRY
SE(S&P)BTPS/EL/EEIC1/17-18/395 13/12/2017PURCHASE ENQUIRY NO : DATE :
VALIDITY : The rates offered shall be valid for a period of 180 days from the date fixed for receipt oftender/quotation.
PRICES: The price shall be quoted per Unit exclusive of Taxes and duties. The following components ofthe rates shall also be mentioned. a) F.O.R , b) Discount if any, c) GST d) Freight , e) item wise HSNcode.
TERMS OF PAYMENT : 100% Payment with full taxes & duties as per actuals after receipt andacceptance of materials at site. If any other mode of payment is insisted/mentioned by the supplier,corporation reserves the right of loading the additional cost to arrive at the landed cost which may pleasebe noted.
1
2
3
Terms and Conditions of Enquiry:
31-JAN-18 11:14:24
( A GOVT. OF KARNATAKA ENTERPRISE )
GR142
OFFICE OF THE
PURCHASE ENQUIRY
SE(S&P)BTPS/EL/EEIC1/17-18/395 13/12/2017PURCHASE ENQUIRY NO : DATE :
Yours Faithfully
QUANTITY : The quantity mentioned in the enquiry is subjected to variation depending on the finalrequirements and Purchase order condition.
GUARANTEE / WARRANTY : The materials shall be guaranteed for a period of 12 months from thedate of commissioning or 18 months from the date of dispatch whichever is earlier against manufacturingdefects/bad workmanship. During this period any defects noticed shall be replaced free of cost at sitewithout waiting for settlement of claims.
PENALTY : For delay in delivery of material beyond the stipulated delivery period, penalty @ 0.5 % perweek subject to a maximum of 5% of value of the delayed quantity shall be applicable.
QUALITY : If the materials supplied are found to be substandard, the materials will be rejected and actionwill be taken as per conditions of purchase order. Materials should be made of best quality in accordancewith the specification duly indicating IS Code, Make , Brand etc.
DEALERSHIP CERTIFICATE : Copy of valid dealership certificate shall be enclosed whereverapplicable. Copies of purchase orders placed by other TPS/ Companies shall be enclosed along with offer.
TRANSPORT: Material shall be transported only through reputed transporters on door delivery basis.
EARNEST MONEY DEPOSIT: If the quoted value is more than Rs. 50000.00(Fifty Thousand Only)then 1% of the quoted value shall be furnished in the form of DD/BG drawn in favour of Deputy GeneralManager (Finance)- BT, BTPS, Karnataka Power Corporation Limited, Kudathini - 583152, from anynationlised / Scheduled Bank with minimum validity of 3(Three) months in a seperate sealed cover.Exemption Certificate for EMD/SD issued by NSIC or by any State Govt or Central Govt will beconsidered.
AGREEMENT: An agreement shall be executed by the supplier ( as per KPCL format) immediately afterreceipt and acceptance of Purchase Order on pre-paid stamped duty paper Worth of Rs 100.00 beforeeffecting supply. E.M.D. will be forfeited if the supplier fails to supply the materials after acceptance /placing of purchase order.
SECURITY DEPOSIT: If the landing cost of the purchase order exceeds Rs.50000.00 (Fifty Thousand),then 5% of the landing cost shall be furnished as SD in the form of DD or BG issued from anyNationalized/Scheduled Bank and it shall be valid for the entire contract/guarantee period before effectingthe supply.
DELIVERY PERIOD: The materials shall be delivered within 30 days from the date of issue of purchaseorder.
SUIT OR PROCEEDINGS: Any Legal suit arising out of the contract shall be initiated exclusives in thelaw court at Bellary, Karnataka State only.
F O R AND CONSIGNEE: The material shall be delivered through reputed transporters on Door deliverybasis to BTPS Stores, KPCL, Kudathini, which is situated on NH-63 approximately 24 Km from Bellaryat the following address :Consignee:The Executive Engineer(Stores)BT,Bellary Thermal PowerStation,Karnataka Power Corporation Ltd., Kudathini -583 152,Bellary - Dist., Karnataka - State,Mobile no.: 9448290750, Fax No.: 08392 288616
4
5
6
7
8
9
10
11
12
13
14
15
31-JAN-18 11:14:24
( A GOVT. OF KARNATAKA ENTERPRISE )
GR142
OFFICE OF THE
PURCHASE ENQUIRY
SE(S&P)BTPS/EL/EEIC1/17-18/395 13/12/2017PURCHASE ENQUIRY NO : DATE :
For KARNATAKA POWER CORPORATION LIMITED
SUPERINDENTING ENGINEER(S&P)BTBELLARY THERMAL POWER STATION, KPCLKUDTHINI, PIN-583152Phone 9448290584 Fax 8392288616 Mail [email protected]
31-JAN-18 11:14:24
Sir, Please send your quotation/offer with terms and conditions for the materials specified in the table below.
5413401145
5413401242
5413401331
5413401528
Item Code
BF VALVE DOOR SEAL
DOOR SEAL
DOOR SEAL
BF VALVE DOOR SEAL
Item Name/Specification
6
26
4
12
BHEL MAKE VALVE DRG NO 09513800037/38. PART NO 11 DOOR SEALFOR BF VALVE 500 NB DRGNO 3- 216-01-12134 VAR 12 MATERIALACRYLO NITRILE RUBBER
BHEL MAKEVALVE DRG NO 09513800036/39. PART NO 09 DOOR SEALDRG NO 2-216-01-12096 FOR BF VALVE 600 NB VAR 03 MATERIALACRYLO NITRILE RUBBER
BHEL MAKE VALVE DRG NO 09513800034. PART NO 09 DOOR SEAL FORBF VALVE 800NBDRG NO 2-216-01-12096 VAR 08 MATERIAL ACRYLONITRILE RUBBER
BHEL MAKE VALVE DRG NO 09513800032. PART NO 08 DOOR SEAL FORBF VALVE 1800 NB DRG NO 29513800008 MATERIAL ACRYLO NITRILERUBBER
SlNo
Unit RequiredQuantity
NUMBERS
NUMBERS
NUMBERS
NUMBERS
1
2
3
4
Important Dates: 1 . Last date for receipt of quotations/tenders/offers :2 . Opening Date of quotations/tenders/offers :
23/02/2018 15:00
23/02/2018 15:30
Important Note: 1. Quotations/Tenders/Offers shall be in a sealed cover with following superscription. a) Purchase Enquiry Number and Date . b) Date of opening2. Bidders/Agencies shall invariably furnish valid TIN along with Quotations/Offers.3. Offers without valid TIN will not be considered for evaluation.
( A GOVT. OF KARNATAKA ENTERPRISE )
GR142
OFFICE OF THE
PURCHASE ENQUIRY
SE(S&P)BTPS/EL/EETM/17-18/398 19/12/2017PURCHASE ENQUIRY NO : DATE :
VALIDITY: The rates offered shall be valid for a period of 180 days from the date of opening of thetender/quotation.
PRICES: The price shall be quoted per Unit exclusive of Taxes and duties. The following components ofthe rates shall also be mentioned. a) F.O.R , b) Discount if any, c) GST d) Freight , e) item wise HSNcode.
TERMS OF PAYMENT : 100% Payment with full taxes & duties as per actuals after receipt andacceptance of materials at site. If any other mode of payment is insisted/mentioned by the supplier,corporation reserves the right of loading the additional cost to arrive at the landed cost which may please
1
2
3
Terms and Conditions of Enquiry:
31-JAN-18 11:14:24
( A GOVT. OF KARNATAKA ENTERPRISE )
GR142
OFFICE OF THE
PURCHASE ENQUIRY
SE(S&P)BTPS/EL/EETM/17-18/398 19/12/2017PURCHASE ENQUIRY NO : DATE :
be noted.
QUANTITY : The quantity mentioned in the enquiry is subjected to variation depending on the finalrequirements and Purchase order condition.
GUARANTEE / WARRANTY : The materials shall be guaranteed for a period of 12 months from thedate of commissioning or 18 months from the date of dispatch whichever is earlier against manufacturingdefects/bad workmanship. During this period any defects noticed shall be replaced free of cost at sitewithout waiting for settlement of claims.
PENALTY : For delay in delivery of material beyond the stipulated delivery period, penalty @ 0.5 % perweek subject to a maximum of 5% of value of the delayed quantity shall be applicable.
QUALITY : If the materials supplied are found to be substandard, the materials will be rejected and actionwill be taken as per conditions of purchase order. Materials should be made of best quality in accordancewith the specification duly indicating IS Code, Make , Brand etc.
DEALERSHIP CERTIFICATE : Copy of valid dealership certificate shall be enclosed whereverapplicable. Copies of purchase orders placed by other TPS/ Companies shall be enclosed along with offer.
TRANSPORT: Material shall be transported only through reputed transporters on door delivery basis.
EARNEST MONEY DEPOSIT: If the quoted value is more than Rs. 50000.00(Fifty Thousand Only)then 1% of the quoted value shall be furnished in the form of DD/BG drawn in favour of Deputy GeneralManager (Finance)- BT, BTPS, Karnataka Power Corporation Limited, Kudathini - 583152, from anynationlised / Scheduled Bank with minimum validity of 3(Three) months in a seperate sealed cover.Exemption Certificate for EMD/SD issued by NSIC or by any State Govt or Central Govt will beconsidered.
AGREEMENT: An agreement shall be executed by the supplier ( as per KPCL format) immediately afterreceipt and acceptance of Purchase Order on pre-paid stamped duty paper Worth of Rs 100.00 beforeeffecting supply. E.M.D. will be forfeited if the supplier fails to supply the materials after acceptance /placing of purchase order.
SECURITY DEPOSIT: If the landing cost of the purchase order exceeds Rs.50000.00 (Fifty Thousand),then 5% of the landing cost shall be furnished as SD in the form of DD or BG issued from anyNationalized/Scheduled Bank and it shall be valid for the entire contract/guarantee period before effectingthe supply.
DELIVERY PERIOD: The materials shall be delivered within 30 days from the date of issue of purchaseorder.
SUIT OR PROCEEDINGS: Any Legal suit arising out of the contract shall be initiated exclusives in thelaw court at Bellary, Karnataka State only.
F O R AND CONSIGNEE: The material shall be delivered through reputed transporters on Door deliverybasis to BTPS Stores, KPCL, Kudathini, which is situated on NH-63 approximately 24 Km from Bellaryat the following address : Consignee: The Executive Engineer(Stores)BT,
4
5
6
7
8
9
10
11
12
13
14
15
31-JAN-18 11:14:24
( A GOVT. OF KARNATAKA ENTERPRISE )
GR142
OFFICE OF THE
PURCHASE ENQUIRY
SE(S&P)BTPS/EL/EETM/17-18/398 19/12/2017PURCHASE ENQUIRY NO : DATE :
For KARNATAKA POWER CORPORATION LIMITED
Yours Faithfully
SUPERINDENTING ENGINEER(S&P)BTBELLARY THERMAL POWER STATION, KPCLKUDTHINI, PIN-583152Phone 9448290584 Fax 8392288616 Mail [email protected]
Bellary Thermal Power Station, Karnataka Power Corporation Ltd., Kudathini -583 152, Bellary - Dist., Karnataka - State, Mobile no.: 9448290750, Fax No.: 08392 288616.
31-JAN-18 11:14:24
Sir, Please send your quotation/offer with terms and conditions for the materials specified in the table below.
1111301031
2912071343
2916215382
3610701204
4010501011
Item Code
11KV DISCHARGE RODS
WIRE SLING ROPE - 2TON , 2MTR
'D SHACKLE 1.5 TON CAP.
P P ROPE 20MM
RUBBER HAND GLOVES[ELECTRICAL]
Item Name/Specification
2
2
4
10
4
11KV Discharge rods along with necessary clamps, connectors, cables etc.,Specifications:Make: BEIMCOMaterila: FRP PultrudedProcess: Automatic PultrusionDesign: TelescopicLocking: Threaded coupler typeSections: 3 sectionsTotal height: 18 feet length of the cable : 10 mtrsEarthing: Die cast aluminium earthing instrumentGrounding clamp: Die cast aluminium grounding C clamps
High quality wire sling rope with test certificate.capacity:2tonlength: 2mtrmake:Slingest,Ferartara,tough ropes,Extra power, usha martin.
D SHACKLESAFE LIFT BRAND ALLOY STEEL D-SHAKLE,DROP FORGED,QUENCHED, TEMPERED AND GALVANISED.SCREWED PIN TYPE
Garware make P.P. rope 20 mm dia in length 50m.
12" heavy duty natural latex seamless hand gloves for electrical shock protection. Testpotential: 15 KV, Max. working potential: 3.3 KV as per IS 4770
SlNo
Unit RequiredQuantity
SETS
NUMBERS
NUMBERS
KILOGRAMS
PAIR
1
2
3
4
5
Important Dates: 1 . Last date for receipt of quotations/tenders/offers :2 . Opening Date of quotations/tenders/offers :
23/02/2018 15:00
23/02/2018 15:30
Important Note: 1. Quotations/Tenders/Offers shall be in a sealed cover with following superscription. a) Purchase Enquiry Number and Date . b) Date of opening2. Bidders/Agencies shall invariably furnish valid TIN along with Quotations/Offers.3. Offers without valid TIN will not be considered for evaluation.
( A GOVT. OF KARNATAKA ENTERPRISE )
GR142
OFFICE OF THE
PURCHASE ENQUIRY
SE(S&P)BTPS/EL/ADPH/17-18/446 23/01/2018PURCHASE ENQUIRY NO : DATE :
Terms and Conditions of Enquiry:
31-JAN-18 11:14:24
( A GOVT. OF KARNATAKA ENTERPRISE )
GR142
OFFICE OF THE
PURCHASE ENQUIRY
SE(S&P)BTPS/EL/ADPH/17-18/446 23/01/2018PURCHASE ENQUIRY NO : DATE :
VALIDITY : The rates offered shall be valid for a period of 180 days from the date fixed for receipt oftender/quotation.
PRICES: The price shall be quoted per Unit exclusive of Taxes and duties. The following components ofthe rates shall also be mentioned. a) F.O.R , b) Discount if any, c) GST d) Freight , e) item wise HSNcode.
TERMS OF PAYMENT : 100% Payment with full taxes & duties as per actuals after receipt andacceptance of materials at site. If any other mode of payment is insisted/mentioned by the supplier,corporation reserves the right of loading the additional cost to arrive at the landed cost which may pleasebe noted.
QUANTITY : The quantity mentioned in the enquiry is subjected to variation depending on the finalrequirements and Purchase order condition.
GUARANTEE / WARRANTY : The materials shall be guaranteed for a period of 12 months from thedate of commissioning or 18 months from the date of dispatch whichever is earlier against manufacturingdefects/bad workmanship. During this period any defects noticed shall be replaced free of cost at sitewithout waiting for settlement of claims.
PENALTY : For delay in delivery of material beyond the stipulated delivery period, penalty @ 0.5 % perweek subject to a maximum of 5% of value of the delayed quantity shall be applicable.
QUALITY : If the materials supplied are found to be substandard, the materials will be rejected and actionwill be taken as per conditions of purchase order. Materials should be made of best quality in accordancewith the specification duly indicating IS Code, Make , Brand etc.
DEALERSHIP CERTIFICATE : Copy of valid dealership certificate shall be enclosed whereverapplicable. Copies of purchase orders placed by other TPS/ Companies shall be enclosed along with offer.
TRANSPORT: Material shall be transported only through reputed transporters on door delivery basis.
EARNEST MONEY DEPOSIT: If the quoted value is more than Rs. 50000.00(Fifty Thousand Only)then 1% of the quoted value shall be furnished in the form of DD/BG drawn in favour of Deputy GeneralManager (Finance)- BT, BTPS, Karnataka Power Corporation Limited, Kudathini - 583152, from anynationlised / Scheduled Bank with minimum validity of 3(Three) months in a seperate sealed cover.Exemption Certificate for EMD/SD issued by NSIC or by any State Govt or Central Govt will beconsidered.
AGREEMENT: An agreement shall be executed by the supplier ( as per KPCL format) immediately afterreceipt and acceptance of Purchase Order on pre-paid stamped duty paper Worth of Rs 100.00 beforeeffecting supply. E.M.D. will be forfeited if the supplier fails to supply the materials after acceptance /placing of purchase order.
SECURITY DEPOSIT: If the landing cost of the purchase order exceeds Rs.50000.00 (Fifty Thousand),then 5% of the landing cost shall be furnished as SD in the form of DD or BG issued from anyNationalized/Scheduled Bank and it shall be valid for the entire contract/guarantee period before effectingthe supply.
1
2
3
4
5
6
7
8
9
10
11
12
31-JAN-18 11:14:24
( A GOVT. OF KARNATAKA ENTERPRISE )
GR142
OFFICE OF THE
PURCHASE ENQUIRY
SE(S&P)BTPS/EL/ADPH/17-18/446 23/01/2018PURCHASE ENQUIRY NO : DATE :
For KARNATAKA POWER CORPORATION LIMITED
Yours Faithfully
SUPERINDENTING ENGINEER(S&P)BTBELLARY THERMAL POWER STATION, KPCLKUDTHINI, PIN-583152Phone 9448290584 Fax 8392288616 Mail [email protected]
DELIVERY PERIOD: The materials shall be delivered within 30 days from the date of issue of purchaseorder.
SUIT OR PROCEEDINGS: Any Legal suit arising out of the contract shall be initiated exclusives in thelaw court at Bellary, Karnataka State only.
F O R AND CONSIGNEE: The material shall be delivered through reputed transporters on Door deliverybasis to the Executive Engineer (Electrical), Almatti Dam Power House (ADPH), Karnataka PowerCorporation Limited, Sitimane - 587207, Post: Rampur, Dist. Bagalkot, Karnataka State
13
14
15