© 2008 McGraw-Hill Higher Education. All Rights Reserved. Chapter 21: Locomotion: When Suspended...
-
Upload
belinda-russell -
Category
Documents
-
view
215 -
download
0
Transcript of © 2008 McGraw-Hill Higher Education. All Rights Reserved. Chapter 21: Locomotion: When Suspended...
© 2008 McGraw-Hill Higher Education. All Rights Reserved.
Chapter 21:Chapter 21:Locomotion:Locomotion:When Suspended When Suspended and Free of Supportand Free of Support
KINESIOLOGYScientific Basis of Human Motion, 11th edition
Hamilton, Weimar & Luttgens
Presentation Created byTK Koesterer, Ph.D., ATCHumboldt State University
Revised by Hamilton & Weimar
KINESIOLOGYScientific Basis of Human Motion, 11th edition
Hamilton, Weimar & Luttgens
Presentation Created byTK Koesterer, Ph.D., ATCHumboldt State University
Revised by Hamilton & Weimar
© 2008 McGraw-Hill Higher Education. All Rights Reserved.
ObjectivesObjectives
1. Explain the major factors that influence the action of swinging bodies.
2. Describe how to initiate pendular action, increase the height of a swing, alter the period, change grips, and dismount safely.
3. Explain the major factors that influence the flight path of unsupported bodies.
4. Describe how to initiate and control rotation of unsupported bodies.
5. Analyze the performance of a suspension and a nonsupport movement.
© 2008 McGraw-Hill Higher Education. All Rights Reserved.
SUSPENSION ACTIVITIESSUSPENSION ACTIVITIES
Climbing, hanging, swinging, and other suspension activities were more commonly engaged in by our early ancestors.
Fig 21.1
© 2008 McGraw-Hill Higher Education. All Rights Reserved.
Principles Related to Hanging Principles Related to Hanging and Hand Traveling Activitiesand Hand Traveling Activities
1. Muscles of the arm and shoulder girdle must contract to protect the joints.
2. Hand traveling is a locomotor pattern governed by the principle of action and reaction.
3. The action used in hand climbing activities is essentially a chinning action.
4. Sequential hand support movements should be continuous, so that momentum of one action contributes to the next action.
© 2008 McGraw-Hill Higher Education. All Rights Reserved.
Principles Related to Principles Related to Swinging MovementsSwinging Movements
1. The movement of a pendulum is produced by the force of gravity.
2. As the pendulum swings downward, gravity causes its speed to increase; as it swings upward, gravity counteracts its speed.
3. The upward movement of a pendulum is brought about by the momentum developed in the downward movement.
© 2008 McGraw-Hill Higher Education. All Rights Reserved.
Principles Related to Principles Related to Swinging MovementsSwinging Movements
4. The potential energy of the pendulum is greatest at the maximum height of the swing and zero at the bottom.
5. The centripetal-centrifugal force in pendular movements increases as the mass or velocity increases and decreases as the radius increases.
6. When a pendulum reaches the end of its arc, it reaches a zero point in velocity.
© 2008 McGraw-Hill Higher Education. All Rights Reserved.
Principles Related to Principles Related to Swinging MovementsSwinging Movements
7. The height of a swing may be increased by lengthening the radius of rotation on the downswing and decreasing it on the up swing.
8. To increase height, the decrease in radius should be initiated at the moment that the center of gravity of the body is directly under the axis of rotation.
© 2008 McGraw-Hill Higher Education. All Rights Reserved.
Principles Related to Principles Related to Swinging MovementsSwinging Movements
9. The time taken by the pendulum to make a single round trip excursion (know as its period) is related to the length of the pendulum.
10. The period of the pendulum is not influenced by its weight.
© 2008 McGraw-Hill Higher Education. All Rights Reserved.
Principles Related to Principles Related to Swinging MovementsSwinging Movements
11. When a body consisting of two segments reaches the vertical, with the proximal segment leading on the downswing, the distal segment will accelerate relative to the other segment and precede it into the upswing (beat swing).
Fig 21.3
© 2008 McGraw-Hill Higher Education. All Rights Reserved.
Principles Related to Principles Related to Swinging MovementsSwinging Movements
12. The rotation of the hands about a bar is opposed by frictional forces.
13. In all mounting exercises involving swinging, the center of gravity must be brought as near as possible to the center of rotation.
14. In support swings the center of gravity should be at the point of support.
© 2008 McGraw-Hill Higher Education. All Rights Reserved.
Suspension Analysis Suspension Analysis ExampleExample
Half-turn Flying Hip Circle with Hecht Dismount
Fig 21.4
© 2008 McGraw-Hill Higher Education. All Rights Reserved.
Suspension Analysis ExampleSuspension Analysis ExampleHalf-turn Flying Hip Circle with Hecht DismountHalf-turn Flying Hip Circle with Hecht Dismount
Mechanical Essentials Starting down swing from a handstand, push
against the bar. Reactive force pushes back in opposite
direction. The backward push and stretch increase the
distance between center of gravity and the axis of rotation. Increases torque on the downswing.
© 2008 McGraw-Hill Higher Education. All Rights Reserved.
Suspension Analysis ExampleSuspension Analysis ExampleHalf-turn Flying Hip Circle with Hecht DismountHalf-turn Flying Hip Circle with Hecht Dismount
Mechanical Essentials Time for gravity to act on the downward
swinging body is also increased. Half-twist is performed at the beginning of the
downswing when the forces acting on the hands are minimal and the grip change can be accomplished with ease.
At the bottom of the swing gymnast flexes the hips, shortening the radius of rotation and increasing angular velocity on the upswing.
© 2008 McGraw-Hill Higher Education. All Rights Reserved.
Suspension Analysis ExampleSuspension Analysis ExampleHalf-turn Flying Hip Circle with Hecht DismountHalf-turn Flying Hip Circle with Hecht Dismount
Mechanical Essentials The piked position also enables the “wrap”
around the low bar as she moves into the back hip circle.
As hands leave the high bar, she pushes up and forward, causing the reactive force to add to the downward trunk rotation.
Hip circle should be accomplished with the hips close to the bar.
© 2008 McGraw-Hill Higher Education. All Rights Reserved.
Suspension Analysis ExampleSuspension Analysis ExampleHalf-turn Flying Hip Circle with Hecht DismountHalf-turn Flying Hip Circle with Hecht Dismount
Mechanical Essentials Near the end of the hip circle the gymnast
forcefully extends by lifting the upper trunk and arms forward and upward.
This action has several effects: Legs extend in reaction so body is straight. Moment of inertia is increased. Rate of rotation decreases.
© 2008 McGraw-Hill Higher Education. All Rights Reserved.
Suspension Analysis ExampleSuspension Analysis ExampleHalf-turn Flying Hip Circle with Hecht DismountHalf-turn Flying Hip Circle with Hecht Dismount
Mechanical Essentials The body pushes down and back against the
bar causing the bar to push the body forward and up.
This results in the body rotating up and away from the bar for the dismount.
Once the body has left the bar the back should be arched to decrease the radius and aid in rotation of the body, allowing feet to move slightly ahead of the center of gravity at the moment of landing.
© 2008 McGraw-Hill Higher Education. All Rights Reserved.
Suspension Analysis ExampleSuspension Analysis ExampleHalf-turn Flying Hip Circle with Hecht DismountHalf-turn Flying Hip Circle with Hecht Dismount
Anatomical Essentials Strength of shoulders, arms, and hands
are important in swinging movements. Range of motion is also needed for
these movements, particularly in the shoulder during the swing and in the hip and lower back during the pike of the hip circle.
© 2008 McGraw-Hill Higher Education. All Rights Reserved.
NONSUPPORT ACTVITIESNONSUPPORT ACTVITIES
The unsupported body moves through the air along a pathway determined prior to the beginning of flight.
Principles governing the flight path of the body relate to those of the projectile.
© 2008 McGraw-Hill Higher Education. All Rights Reserved.
Principles Related to Principles Related to Nonsupport ActivitiesNonsupport Activities
1. The path of motion of the body’s center of gravity in space is determined by the angle at which it is projected into space, the force of the projection, and the force of gravity.
© 2008 McGraw-Hill Higher Education. All Rights Reserved.
Principles Related to Principles Related to Nonsupport ActivitiesNonsupport Activities
2. The time a body remains unsupported depends on the height of its projection, which is governed by the vertical velocity of the projection.
Fig 21.5
© 2008 McGraw-Hill Higher Education. All Rights Reserved.
Principles Related to Principles Related to Nonsupport ActivitiesNonsupport Activities
3. Most rotary movements are initiated before the performer leaves the supporting surface
Fig 21.6
© 2008 McGraw-Hill Higher Education. All Rights Reserved.
Principles Related to Principles Related to Nonsupport ActivitiesNonsupport Activities
4. The angular momentum of an unsupported body is conserved.
5. When a body is free in space, movement of a part in one direction results in movement of the rest of the body in the opposite direction.
Fig 21.7
© 2008 McGraw-Hill Higher Education. All Rights Reserved.
Principles Related to Principles Related to Nonsupport ActivitiesNonsupport Activities
6. A performer who is rotating about a horizontal axis in the air may initiate a twist about a vertical axis by tilting the body to one side.
Fig 21.8
© 2008 McGraw-Hill Higher Education. All Rights Reserved.
Nonsupport Analysis ExampleNonsupport Analysis ExampleThe Reverse Dive Layout with 1/2 TwistThe Reverse Dive Layout with 1/2 Twist
Diver starts the dive facing the end of board. Performs a reverse spinning somersault
about a transverse axis in a layout position completing a one-half revolution.
At the same time, he twists one-half a revolution about the vertical axis.
© 2008 McGraw-Hill Higher Education. All Rights Reserved.
Nonsupport Analysis ExampleNonsupport Analysis ExampleThe Reverse Dive Layout with 1/2 TwistThe Reverse Dive Layout with 1/2 Twist
Mechanical essentials Diver must end the forward approach by
pushing backward toward the back end of the board with the feet.
The rebounding board will push back, causing the legs to move forward.
This action of the board causes the reverse spin to develop in the body.
It also causes the entire body to move forward away from the board.
© 2008 McGraw-Hill Higher Education. All Rights Reserved.
Nonsupport Analysis ExampleNonsupport Analysis ExampleThe Reverse Dive Layout with 1/2 TwistThe Reverse Dive Layout with 1/2 Twist
Mechanical essentials The amount of rotation (spin) about the
transverse axis must be determined at take off.
The angular momentum of the dive is determined and conserved at take off and cannot be altered.
The twist in this dive is accomplished through the use of two methods of initiating twists.
© 2008 McGraw-Hill Higher Education. All Rights Reserved.
Nonsupport Analysis ExampleNonsupport Analysis ExampleThe Reverse Dive Layout with 1/2 TwistThe Reverse Dive Layout with 1/2 Twist
Mechanical essentials As the diver leaves the board, he also pushes
slightly to the right to initiate a twist to the left. As diver twists to the left, the left arm is
brought across the chest, causing his body to move in the opposite direction (left) in reaction.
Head is kept in line with the body and the right arm straight overhead decreases the moment of inertia of the rotating body and increases the speed of the twist.
© 2008 McGraw-Hill Higher Education. All Rights Reserved.
Nonsupport Analysis ExampleNonsupport Analysis ExampleThe Reverse Dive Layout with 1/2 TwistThe Reverse Dive Layout with 1/2 Twist
Mechanical essentials Turning the head to the left toward the water
helps in the turn and the diver’s orientation. In spite of the spin about the vertical and
horizontal axis, the center of gravity follows a parabolic curve controlled only by the velocity and angle of projection and the downward acceleration of gravity.
© 2008 McGraw-Hill Higher Education. All Rights Reserved.
Nonsupport Analysis ExampleNonsupport Analysis ExampleThe Reverse Dive Layout with 1/2 TwistThe Reverse Dive Layout with 1/2 Twist
Mechanical essentials At entry, body is stretched with arms
overhead to create the greatest moment of inertia and therefore the slowest rotation.
Rotation is still present. The diver should continue to turn underwater
in the same direction. The angle of entry should be a continuation of
the parabolic path of the center of gravity.
© 2008 McGraw-Hill Higher Education. All Rights Reserved.
Nonsupport Analysis ExampleNonsupport Analysis ExampleThe Reverse Dive Layout with 1/2 TwistThe Reverse Dive Layout with 1/2 Twist
Anatomical essentials Dive requires good strength, flexibility, and
control. Good range of motion in the ankle joint. Strength in the extensors of the hip and knee
is important in lifting the body. Strength of abdominals and back extensors is
important to control vertical alignment. Flexibility of the back and hips for full flexion
in tuck and pike positions.
© 2008 McGraw-Hill Higher Education. All Rights Reserved.
Free FallFree Fall Body will reach terminal
velocity between 100 & 200 mph.
Depends on surface area presented to air flow.
By manipulating body shape velocity can be partially controlled.
Fig 21.9
© 2008 McGraw-Hill Higher Education. All Rights Reserved.
WeightlessnessWeightlessness
The laws of motion still apply. Objects still possess inertia based on
mass or momentum. Acceleration is still directly related to
force and mass. Every action has an equal and opposite
reaction. The only difference is no gravity.