Post on 30-Apr-2018
SECTIUNEA 1, CAPITOLUL 1
Minister CT Indicativ EN Titlu
1 MAI 55 EN ISO 7010:2012
2 MAI 55 EN ISO 7010:2012/A1:2014
3 MAI 55 EN ISO 7010:2012/A2:2014
4 MAI 55 EN ISO 7010:2012/A3:2014
5 MAI 55 EN ISO 7010:2012/A4:2014
6 MAI 55 EN ISO 7010:2012/A5:2015
7 MAI 55 EN ISO 7010:2012/A6:2016
8 MAI 55 EN ISO 7010:2012/A7:2017
9 MAI 216 EN 3-9:2006
10 MAI 216 EN 3-9:2006/AC:2007
11 MAI 216 EN 54-1:2011
12 MAI 216 EN 1846-1:2011
13 MAI 216 EN 12845:2015/AC:2016
14 MAI 217 EN 1365-3:1999
15 MAI 217 EN 13501-2:2016
16 MAI 217 CEN/TR 16988:2016 Estimation of uncertainty in the single burning item test
Standarde europene propuse a se adopta ca standarde române prin publicarea versiunii române
Nr crt
Graphical symbols - Safety colours and safety signs - Registered safety signs (ISO 7010:2011)
Graphical symbols - Safety colours and safety signs - Registered safety signs (ISO 7010:2011/Amd 1:2012)
Graphical symbols - Safety colours and safety signs - Registered safety signs (ISO 7010:2011/Amd 2:2012)
Graphical symbols - Safety colours and safety signs - Registered safety signs (ISO 7010:2011/Amd 3:2012)
Graphical symbols - Safety colours and safety signs - Registered safety signs (ISO 7010:2011/Amd 4:2013)
Graphical symbols - Safety colours and safety signs - Registered safety signs - Amendment 5 (ISO 7010:2011/Amd 5:2014)
Graphical symbols - Safety colours and safety signs - Registered safety signs - Amendment 6 (ISO 7010:2011/Amd 6:2014)
Graphical symbols - Safety colours and safety signs - Registered safety signs - Amendment 7 (ISO 7010:2011/Amd 7:2016)
Portable fire extinguishers - Part 9: Additional requirements to EN 3-7 for pressure resistance of CO2 extinguishers
Portable fire extinguishers - Part 9: Additional requirements to EN 3-7 for pressure resistance of CO2 extinguishers
Fire detection and fire alarm systems - Part 1: Introduction
Firefighting and rescue service vehicles - Part 1: Nomenclature and designation
Fixed firefighting systems - Automatic sprinkler systems - Design, installation and maintenance
Fire resistance tests for loadbearing elements - Part 3: Beams
Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services
17 MAP 52 EN ISO 7393-2:2018
18 MAP 52 EN 12678:2016
19 MAP 52 EN ISO 12846:2012
20 MAP 52 EN 16056:2012
21 MAP 52 EN 16057:2012
22 MAP 52 EN 16058:2012
23 MAP 52 EN ISO 17294-2:2016
24 MCSI 208 EN ISO/IEC 27000:2017
25 MCSI 208 EN ISO/IEC 27001:2017
26 MCSI 208 EN ISO/IEC 27002:2017
27 MCSI 208 EN ISO/IEC 27038:2016
28 MCSI 208 EN ISO/IEC 27040:2016
29 MCSI 208 EN ISO/IEC 27041:2016
Water quality - Determination of free chlorine and total chlorine - Part 2: Colorimetric method using N,N-dialkyl-1,4-phenylenediamine, for routine control purposes (ISO 7393-2:2017)
Chemical used for treatment of water intended for human consumption - Potassium peroxomonosulfate
Water quality - Determination of mercury - Method using atomic absorption spectrometry (AAS) with and without enrichment (ISO 12846:2012)
Influence of metallic materials on water intended for human consumption - Method to evaluate the passive behaviour of stainless steels
Influence of metallic materials on water intended for human consumption - Determination of residual surface lead (Pb) - Extraction method
Influence of metallic materials on water intended for human consumption - Dynamic rig test for assessment of surface coatings with nickel layers - Long-term test method
Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 2: Determination of selected elements including uranium isotopes (ISO 17294-2:2016)
Information technology - Security techniques - Information security management systems - Overview and vocabulary (ISO/IEC 27000:2016)
Information technology - Security techniques - Information security management systems - Requirements (ISO/IEC 27001:2013 including Cor 1:2014 and Cor 2:2015)
Information technology - Security techniques - Code of practice for information security controls (ISO/IEC 27002:2013 including Cor 1:2014 and Cor 2:2015)
Information technology - Security techniques - Specification for digital redaction (ISO/IEC 27038:2014)
Information technology - Security techniques - Storage security (ISO/IEC 27040:2015)
Information technology - Security techniques - Guidance on assuring suitability and adequacy of incident investigative method (ISO/IEC 27041:2015)
30 MCSI 208 EN ISO/IEC 27042:2016
31 136 HD 60364-6:2016/AC:2017-11 Low-voltage electrical installations - Part 6: Verification
32 136 HD 60364-7-708:2009/A11:2017
33 207 CEN/TR 15232-2:2016
34 207 EN 15232-1:2017
35 207 CEN/TR 15500-2:2016
36 207 EN 15500-1:2017
37 218 EN 13331-1:2002 Trench lining systems - Part 1: Product specifications
38 218 EN 13331-2:2002
39 240 CEN/TR 15193-2:2017
40 240 EN 15193-1:2017
41 281 EN ISO 6781-3:2015
42 281 EN ISO 9972:2015
43 281 EN ISO 10077-1:2017
44 281 EN ISO 10077-2:2017
45 281 EN ISO 12569:2017
46 281 EN ISO 12572:2016
47 281 EN ISO 12631:2017
48 281 EN ISO 13786:2017
Information technology - Security techniques - Guidelines for the analysis and interpretation of digital evidence (ISO/IEC 27042:2015)
MDRAPFE
MDRAPFE
Low-voltage electrical installations - Part 7-708: Requirements for special installations or locations - Caravan parks, camping parks and similar locations
MDRAPFE
Energy performance of buildings - Part 2: Accompanying TR prEN 15232-1:2015 - Modules M10-4,5,6,7,8,9,10
MDRAPFE
Energy Performance of Buildings - Energy performance of buildings - Part 1: Impact of Building Automation, Controls and Building Management - Modules M10-4,5,6,7,8,9,10
MDRAPFE
Energy Performance of Buildings - Control for heating, ventilating and air-conditioning applications — Part 2: Accompanying TR prEN 15500-1:2015 - Modules M3-5,M4-5,M5-5
MDRAPFE
Energy Performance of Buildings - Control for heating, ventilating and air conditioning applications - Part 1: Electronic individual zone control equipment - Modules M3-5, M4-5, M5-5
MDRAPFE
MDRAPFE
Trench lining systems - Part 2: Assessment by calculation or test
MDRAPFE
Energy performance of buildings - Energy requirements for lighting - Part 2: Explanation and justification of EN 15193-1, Module M9
MDRAPFE
Energy performance of buildings - Energy requirements for lighting - Part 1: Specifications, Module M9
MDRAPFE
Performance of buildings - Detection of heat, air and moisture irregularities in buildings by infrared methods - Part 3: Qualifications of equipment operators, data analysts and report writers (ISO 6781-3:2015)
MDRAPFE
Thermal performance of buildings - Determination of air permeability of buildings - Fan pressurization method (ISO 9972:2015)
MDRAPFE
Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 1: General (ISO 10077-1:2017)
MDRAPFE
Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 2: Numerical method for frames (ISO 10077-2:2017)
MDRAPFE
Thermal performance of buildings and materials - Determination of specific airflow rate in buildings - Tracer gas dilution method (ISO 12569:2017)
MDRAPFE
Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method (ISO 12572:2016)
MDRAPFE
Thermal performance of curtain walling - Calculation of thermal transmittance (ISO 12631:2017)
MDRAPFE
Thermal performance of building components - Dynamic thermal characteristics - Calculation methods (ISO 13786:2017)
49 281 EN ISO 14683:2017
50 281 EN ISO 15148:2002/A1:2016
51 281 EN ISO 52017-1:2017
52 281 CEN ISO/TR 52018-2:2017
53 281 EN ISO 52018-1:2017
54 281 CEN ISO/TR 52019-2:2017
55 281 CEN ISO/TR 52022-2:2017
56 281 EN ISO 52022-1:2017
57 281 EN ISO 52022-3:2017
58 302 EN 253:2009+A2:2015
59 302 EN 448:2015
60 302 EN 488:2015
61 302 EN ISO 5801:2017
62 302 EN ISO 5802:2008/A1:2015
63 302 EN ISO 9806:2017
MDRAPFE
Thermal bridges in building construction - Linear thermal transmittance - Simplified methods and default values (ISO 14683:2017)
MDRAPFE
Hygrothermal performance of building materials and products - Determination of water absorption coefficient by partial immersion - Amendment 1 (ISO 15148:2002/Amd 1:2016)
MDRAPFE
Energy performance of buildings - Sensible and latent heat loads and internal temperatures - Part 1: Generic calculation procedures (ISO 52017-1:2017)
MDRAPFE
Energy performance of buildings - Indicators for partial EPB requirements related to thermal energy balance and fabric features - Part 2: Explanation and justification of ISO 52018-1 (ISO/TR 52018-2:2017)
MDRAPFE
Energy performance of buildings - Indicators for partial EPB requirements related to thermal energy balance and fabric features - Part 1: Overview of options (ISO 52018-1:2017)
MDRAPFE
Energy performance of buildings - Hygrothermal performance of building components and building elements - Part 2: Explanation and justification (ISO/TR 52019-2:2017)
MDRAPFE
Energy performance of buildings - Thermal, solar and daylight properties of building components and elements - Part 2: Explanation and justification (ISO/TR 52022-2:2017)
MDRAPFE
Energy performance of buildings - Thermal, solar and daylight properties of building components and elements - Part 1: Simplified calculation method of the solar and daylight characteristics for solar protection devices combined with glazing (ISO 52022-1:2017)
MDRAPFE
Energy performance of buildings - Thermal, solar and daylight properties of building components and elements - Part 3: Detailed calculation method of the solar and daylight characteristics for solar protection devices combined with glazing (ISO 52022-3:2017)
MDRAPFE
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene
MDRAPFE
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
MDRAPFE
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
MDRAPFE
Fans - Performance testing using standardized airways (ISO 5801:2017)
MDRAPFE
Industrial fans - Performance testing in situ (ISO 5802:2001/Amd 1:2015)
MDRAPFE
Solar energy - Solar thermal collectors - Test methods (ISO 9806:2017)
64 302 EN ISO 11855-1:2015
65 302 EN ISO 11855-2:2015
66 302 EN ISO 11855-3:2015
67 302 EN ISO 11855-4:2015
68 302 EN ISO 11855-5:2015
69 302 EN ISO 12759:2015
70 302 EN 12976-1:2017
71 302 EN 13141-11:2015
72 302 EN 13141-3:2017
73 302 EN ISO 13350:2015 Fans - Performance testing of jet fans (ISO 13350:2015)
74 302 EN 14037-2:2016
75 302 EN 14037-3:2016
76 302 EN 14037-4:2016
77 302 EN 14037-5:2016
78 302 EN 15316-4-1:2017
MDRAPFE
Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 1: Definition, symbols, and comfort criteria (ISO 11855-1:2012)
MDRAPFE
Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 2: Determination of the design heating and cooling capacity (ISO 11855-2:2012)
MDRAPFE
Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 3: Design and dimensioning (ISO 11855-3:2012)
MDRAPFE
Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 4: Dimensioning and calculation of the dynamic heating and cooling capacity of Thermo Active Building Systems (TABS) (ISO 11855-4:2012)
MDRAPFE
Building environment design - Design , dimensioning, installation and control of embedded radiant heating and cooling systems - Part 5: Installation (ISO 11855-5:2012)
MDRAPFE
Fans - Efficiency classification for fans (ISO 12759:2010, including Amd 1:2013)
MDRAPFE
Thermal solar systems and components - Factory made systems - Part 1: General requirements
MDRAPFE
Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 11: Supply ventilation units
MDRAPFE
Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 3: Range hoods for residential use without fan
MDRAPFE
MDRAPFE
Free hanging heating and cooling surfaces for water with a temperature below 120°C - Part 2: Pre-fabricated ceiling mounted radiant panels for space heating - Test method for thermal output
MDRAPFE
Free hanging heating and cooling surfaces for water with a temperature below 120°C - Part 3: Prefabricated ceiling mounted radiant panels for space heating - Rating method and evaluation of radiant thermal output
MDRAPFE
Free hanging heating and cooling surfaces for water with a temperature below 120°C - Part 4: Pre-fabricated ceiling mounted radiant panels - Test method for cooling capacity
MDRAPFE
Free hanging heating and cooling surfaces for water with a temperature below 120°C - Part 5: Open or closed heated ceiling surfaces - Test method for thermal output
MDRAPFE
Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-1: Space heating and DHW generation systems, combustion systems (boilers, biomass), Module M3-8-1, M8-8-1
79 302 EN 15316-4-5:2017
80 302 EN 15316-5:2017
81 302 EN ISO 16170:2016
82 302 EN 16211:2015
83 302 EN 16282-1:2017
84 302 EN 16282-2:2016
85 302 EN 16282-3:2016
86 302 EN 16282-4:2016
87 302 EN 16282-5:2017
88 302 EN 16282-7:2017
89 302 EN 16282-8:2017
90 302 EN 16573:2017
91 302 CEN/TR 16798-14:2017
92 302 CEN/TR 16798-16:2017
93 302 CEN/TR 16798-18:2017
MDRAPFE
Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-5: District heating and cooling, Module M3-8-5, M4-8-5, M8-8-5, M11-8-5
MDRAPFE
Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 5: Space heating and DHW storage systems (not cooling), Module M3-7, M8-7
MDRAPFE
In situ test methods for high efficiency filter systems in industrial facilities (ISO 16170:2016, Corrected version 2017-04)
MDRAPFE
Ventilation for buildings - Measurement of air flows on site - Methods
MDRAPFE
Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 1: General requirements including calculation method
MDRAPFE
Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 2: Kitchen ventilation hoods; design and safety requirements
MDRAPFE
Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 3: Kitchen ventilation ceilings; design and safety requirements
MDRAPFE
Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 4: Air inlets and outlets; design and safety requirements
MDRAPFE
Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 5: Air duct; Design and dimensioning
MDRAPFE
Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 7: Installation and use of fixed fire suppression systems
MDRAPFE
Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 8: Installations for treatment of aerosol; Requirements and testing
MDRAPFE
Ventilation for Buildings - Performance testing of components for residential buildings - Multifunctional balanced ventilation units for single family dwellings, including heat pumps
MDRAPFE
Energy performance of buildings - Ventilation for buildings - Part 14: Interpretation of the requirements in EN 16798-13 - Calculation of cooling systems (Module M4-8) - Generation
MDRAPFE
Energy performance of buildings - Ventilation for buildings - Part 16: Interpretation of the requirements in EN 16798-15 - Calculation of cooling systems (Module M4-7) - Storage
MDRAPFE
Energy performance of buildings - Ventilation for buildings - Part 18: Interpretation of the requirements in EN 16798-17 - Guidelines for inspection of ventilation and air-conditioning systems (Modules M4-11, M5-11, M6-11, M7-11)
94 302 CEN/TR 16798-2:2017
95 302 CEN/TR 16798-6:2017
96 302 CEN/TR 16798-8:2017
97 302 EN 16798-13:2017
98 302 EN 16798-15:2017
99 302 EN 16798-17:2017
100 302 EN 16798-3:2017
101 302 EN 16798-5-1:2017
102 302 EN 16798-5-2:2017
103 302 EN 16798-7:2017
104 302 EN 16798-9:2017
105 302 FprEN 16798-1
106 302 CEN/TR 16798-10:2017
MDRAPFE
Energy performance of buildings - Ventilation for buildings - Part 2: Interpretation of the requirements in EN 16798-1 - Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics (Module M1-6)
MDRAPFE
Energy performance of buildings - Ventilation for buildings - Part 6: Interpretation of the requirements in EN 16798-5 -1 and EN 16798-5-2 - Calculation methods for energy requirements of ventilation and air conditioning systems (Modules M5-6, M5-8, M 6-5, M6-8 , M7-5, M7-8)
MDRAPFE
Energy performance of buildings - Ventilation for buildings - Part 8: Interpretation of the requirements in EN 16798-7 - Calculation methods for the determination of air flow rates in buildings including infiltration - (Module M5-5)
MDRAPFE
Energy performance of buildings - Ventilation for buildings - Part 13: Calculation of cooling systems (Module M4-8) - Generation
MDRAPFE
Energy performance of buildings - Ventilation for buildings - Part 15: Calculation of cooling systems (Module M4-7) - Storage
MDRAPFE
Energy performance of buildings - Ventilation for buildings - Part 17: Guidelines for inspection of ventilation and air conditioning systems (Module M4-11, M5-11, M6-11, M7-11)
MDRAPFE
Energy performance of buildings - Ventilation for buildings - Part 3: For non-residential buildings - Performance requirements for ventilation and room-conditioning systems (Modules M5-1, M5-4)
MDRAPFE
Energy performance of buildings - Ventilation for buildings - Part 5-1: Calculation methods for energy requirements of ventilation and air conditioning systems (Modules M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - Method 1: Distribution and generation
MDRAPFE
Energy performance of buildings - Ventilation for buildings - Part 5-2: Calculation methods for energy requirements of ventilation systems (Modules M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - Method 2: Distribution and generation
MDRAPFE
Energy performance of buildings - Ventilation for buildings - Part 7: Calculation methods for the determination of air flow rates in buildings including infiltration (Modules M5-5)
MDRAPFE
Energy performance of buildings - Ventilation for buildings - Part 9: Calculation methods for energy requirements of cooling systems (Modules M4-1, M4-4, M4-9) - General
MDRAPFE
Energy performance of buildings - Part 1: Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics - Module M1-6
MDRAPFE
Energy performance of buildings - Ventilation for buildings - Part 10: Interpretation of the requirements in EN 16798-9 - Calculation methods for energy requirements of cooling systems (Module M4-1,M4-4, M4-9) - General
107 302 CEN/TR 16798-4:2017
108 302 EN ISO 16891:2016
109 302 EN ISO 22975-1:2016
110 302 EN ISO 22975-2:2016
111 321 EN 206:2013+A1:2016
112 321 EN 451-2:2017
113 321 EN 480-13:2015
114 343 EN 1991-1-3:2003/A1:2015
115 343 EN 1993-1-4:2006/A1:2015
116 343 EN 1993-1-5:2006/A1:2017
117 343 EN 1993-1-6:2007/A1:2017
118 343 EN 1993-4-1:2007/A1:2017 Eurocode 3 - Design of steel structures - Part 4-1: Silos
119 343 EN 1993-4-2:2007/A1:2017
120 346 EN 62561-3:2017
121 361 EN ISO 22476-4:2012
122 ME 15 EN 62772:2016
123 ME 19 EN 60068-1:2014 Environmental testing - Part 1: General and guidance
124 ME 19 EN 60068-2-14:2009
125 ME 19 EN 60068-2-31:2008
126 ME 19 EN 60068-2-6:2008
MDRAPFE
Energy performance of buildings - Ventilation for buildings - Part 4: Interpretation of the requirements in EN 16798- 3 - For non-residential buildings - Performance requirements for ventilation and room-conditioning systems(Modules M5-1, M5-4)
MDRAPFE
Test methods for evaluating degradation of characteristics of cleanable filter media (ISO 16891:2016)
MDRAPFE
Solar energy - Collector components and materials - Part 1: Evacuated tubes - Durability and performance (ISO 22975-1:2016)
MDRAPFE
Solar energy - Collector components and materials - Part 2: Heat-pipes for solar thermal application - Durability and performance (ISO 22975-2:2016)
MDRAPFE
Concrete - Specification, performance, production and conformity
MDRAPFE
Method of testing fly ash - Part 2: Determination of fineness by wet sieving
MDRAPFE
Admixtures for concrete, mortar and grout - Test methods - Part 13: Reference masonry mortar for testing mortar admixtures
MDRAPFE
Eurocode 1 - Actions on structures - Part 1-3: General actions - Snow loads
MDRAPFE
Eurocode 3 - Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels
MDRAPFE
Eurocode 3 - Design of steel structures - Part 1-5: Plated structural elements
MDRAPFE
Eurocode 3 - Design of steel structures - Part 1-6: Strength and Stability of Shell Structures
MDRAPFE
MDRAPFE
Eurocode 3 - Design of steel structures - Part 4-2: Tanks
MDRAPFE
Lightning Protection System Components (LPSC) - Part 3: Requirements for isolating spark gaps (ISG)
MDRAPFE
Geotechnical investigation and testing - Field testing - Part 4: Ménard pressuremeter test (ISO 22476-4:2012)
Composite Hollow Core Station Post Insulators for substations with a.c. voltage greater than 1 000 V and d.c. voltage greater than 1 500 V - Definitions, test methods and acceptance criteria
Environmental testing - Part 2-14: Tests - Test N: Change of temperature
Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens
Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
127 ME 23 EN 60534-8-2:2011
128 ME 23 EN 60770-1:2011
129 ME 23 EN 61003-1:2004
130 ME 23 EN 61508-5:2010
131 ME 26 EN 60318-4:2010
132 ME 26 EN 61672-2:2013
133 ME 27 EN 60839-11-2:2015
134 ME 39 EN ISO 14271:2017
135 ME 39 EN ISO 19285:2017
136 ME 39 EN ISO 23279:2017
137 ME 58 EN ISO 12180-1:2011
138 ME 58 EN ISO 12180-2:2011
139 ME 58 EN ISO 12181-1:2011
140 ME 58 EN ISO 12181-2:2011
141 ME 58 EN ISO 80000-1:2013
142 ME 59 EN ISO 898-2:2012
Industrial-process control valves - Part 8-2: Noise considerations - Laboratory measurement of noise generated by hydrodynamic flow through control valves
Transmitters for use in industrial-process control systems - Part 1: Methods for performance evaluation
Industrial-process control systems - Instruments with analogue inputs and two- or multi-state outputs - Part 1: Methods of evaluating performance
Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels
Electroacoustics - Simulators of human head and ear - Part 4: Occluded-ear simulator for the measurement of earphones coupled to the ear by means of ear inserts
Electroacoustics - Sound level meters - Part 2: Pattern evaluation tests
Alarm and electronic security systems - Part 11-2: Electronic access control systems - Application guidelines
Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2017)
Non-destructive testing of welds - Phased array ultrasonic testing (PAUT) - Acceptance levels (ISO 19285:2017)
Non-destructive testing of welds - Ultrasonic testing - Characterization of discontinuities in welds (ISO 23279:2017)
Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO 12180-1:2011)
Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO 12180-2:2011)
Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO 12181-1:2011)
Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011)
Quantities and units - Part 1: General (ISO 80000-1:2009 + Cor 1:2011)
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012)
143 ME 59 EN ISO 16426:2002
144 ME 66 EN 926-1:2015
145 ME 66 EN 16051-1:2012
146 ME 84 EN ISO 505:2017
147 ME 103 EN ISO 13935-1:2014
148 ME 103 EN ISO 13935-2:2014
149 ME 103 EN ISO 13938-2:1999
150 ME 109 EN 12405-3:2015
151 ME 109 EN 16314:2013 Gas meters - Additional functionalities
152 ME 131 EN 60061-2:1993/A46:2013
153 ME 131 EN 60061-3:1993/A47:2013
154 ME 131 EN 62612:2013/AC:2016-10
155 ME 145 EN 60352-5:2012
156 ME 164 EN 62052-11:2003/A1:2017
157 ME 164 EN 62053-11:2003/A1:2017
158 ME 164 EN 62053-21:2003/A1:2017
159 ME 164 EN 62053-22:2003/A1:2017
160 ME 164 EN 62053-23:2003/A1:2017
161 ME 207 EN 14597:2012
Fasteners - Quality assurance system (ISO 16426:2002)
Paragliding equipment - Paragliders - Part 1: Requirements and test methods for structural strength
Inflation devices and accessories for inflatable consumer products - Part 1: Compatibility of valves and valve adapters
Conveyor belts - Method for the determination of the tear propagation resistance of textile conveyor belts (ISO 505:2017)
Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 1: Determination of maximum force to seam rupture using the strip method (ISO 13935-1:2014)
Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2: Determination of maximum force to seam rupture using the grab method (ISO 13935-2:2014)
Textiles - Bursting properties of fabrics - Part 2: Pneumatic method for determination of bursting strength and bursting distension (ISO 13938-2:1999)
Gas meters - Conversion devices - Part 3: Flow computer
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
Self-ballasted LED lamps for general lighting services with supply voltages > 50 V - Performance requirements
Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance
Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 11: Metering equipment
Electricity metering equipment (a.c.) - Particular requirements - Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2)
Electricity metering equipment (a.c.) - Particular requirements - Part 21: Static meters for active energy (classes 1 and 2)
Electricity metering equipment (a.c.) - Particular requirements - Part 22: Static meters for active energy (classes 0,2 S and 0,5 S)
Electricity metering equipment (a.c.) - Particular requirements - Part 23: Static meters for reactive energy (classes 2 and 3)
Temperature control devices and temperature limiters for heat generating systems
162 ME 225 EN 12952-12:2003
163 ME 225 EN 12952-13:2003
164 ME 225 EN 12953-10:2003
165 ME 225 EN 15036-1:2006
166 ME 225 EN 15456:2008
167 ME 230 EN ISO 11146-1:2005
168 ME 230 EN ISO 11146-2:2005
169 ME 230 EN ISO 11670:2003
170 ME 230 EN ISO 13694:2015
171 ME 230 EN ISO 15367-1:2003
172 ME 230 EN ISO 15367-2:2005
173 ME 230 EN ISO 17526:2003
174 ME 231 EN 1968:2002
175 ME 231 EN ISO 11114-2:2013
176 ME 231 EN ISO 11363-1:2018
Water-tube boilers and auxiliary installations - Part 12: Requirements for boiler feedwater and boiler water quality
Water-tube boilers and auxiliary installations - Part 13: Requirements for flue gas cleaning systems
Shell boilers - Part 10 : Requirements for feedwater and boiler water quality
Heating boilers - Test regulations for airborne noise emissions from heat generators - Part 1: Airborne noise emissions from heat generators
Heating boilers - Electrical power consumption for heat generators - System boundaries - Measurements
Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 1: Stigmatic and simple astigmatic beams (ISO 11146-1:2005)
Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 2: General astigmatic beams (ISO 11146-2:2005)
Lasers and laser-related equipment - Test methods for laser beam parameters - Beam positional stability (ISO 11670:2003)
Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution (ISO 13694:2015)
Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Part 1: Terminology and fundamental aspects (ISO 15367-1:2003)
Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Part 2: Shack-Hartmann sensors (ISO 15367-2:2005)
Optics and optical instruments - Lasers and laser-related equipment - Lifetime of lasers (ISO 17526:2003)
Transportable gas cylinders - Periodic inspection and testing of seamless steel gas cylinders
Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO 11114-2:2013)
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications (ISO 11363-1:2018)
177 ME 231 EN ISO 15245-1:2001
178 ME 238 EN 60734:2012
179 ME 338 EN ISO 787-1:2017
180 ME 338 EN ISO 787-22:2017
181 ME 338 EN ISO 787-4:2017
182 ME 357 EN 1918-2:2016
183 ME 357 EN 1918-5:2016
184 ME 357 EN ISO 15403-1:2008
185 ME 357 EN ISO 16664:2017
186 ME 357 EN 16723-2:2017
187 ME 357 CEN/TR 16940:2016
188 ME 357 prEN ISO 20765-2
189 MM 19 EN 50625-1:2014
190 MM 19 EN 50625-2-1:2014
191 MM 19 EN 50625-2-2:2015
192 MM 19 EN 50625-2-3:2017
193 MM 19 EN 50625-2-4:2017
194 MM 53 EN 482:2012+A1:2015
195 MM 53 EN 13284-1:2017
Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification (ISO 15245-1:2001)
Household electrical appliances - Performance - Water for testing
General methods of test for pigments and extenders - Part 1: Comparison of colour of pigments (ISO 787-1:1982)
General methods of test for pigments and extenders - Part 22: Comparison of resistance to bleeding of pigments (ISO 787-22:1980)
General methods of test for pigments and extenders - Part 4: Determination of acidity or alkalinity of the aqueous extract (ISO 787-4:1981)
Gas infrastructure - Underground gas storage - Part 2: Functional recommendations for storage in oil and gas fields
Gas infrastructure - Underground gas storage - Part 5: Functional recommendations for surface facilities
Natural gas - Natural gas for use as a compressed fuel for vehicles - Part 1: Designation of the quality (ISO 15403-1:2006)
Gas analysis - Handling of calibration gases and gas mixtures - Guidelines (ISO 16664:2017)
Natural gas and biomethane for use in transport and biomethane for injection in the natural gas network - Part 2: Automotive fuels specification
Domestic gas installations - Recommendations for safety
Natural gas - Calculation of thermodynamic properties - Part 2: Single-phase properties (gas, liquid, and dense fluid) for extended ranges of application (ISO 20765-2:2015)
Collection, logistics & Treatment requirements for WEEE - Part 1: General treatment requirements
Collection, logistics and treatment requirements for WEEE - Part 2-1: Treatment requirements for lamps
Collection, logistics & Treatment requirements for WEEE - Part 2-2: Treatment requirements for WEEE containing CRTs and flat panel displays
Collection, logistics & treatment requirements for WEEE - Part 2-3: Treatment requirements for temperature exchange equipment and other WEEE containing VFC and/or VHC
Collection, logistics & treatment requirements for WEEE - Part 2-4: Treatment requirements for photovoltaic panels
Workplace exposure - General requirements for the performance of procedures for the measurement of chemical agents
Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method
196 MM 53 EN 13284-2:2017
197 MM 276 EN ISO 10140-1:2016
198 MM 276 EN ISO 10848-1:2017
199 MM 276 EN ISO 10848-2:2017
200 MM 360 EN 14405:2017
201 MM 360 EN 14429:2015
202 MM 360 EN 14582:2016
203 MM 360 EN ISO 14780:2017 Solid biofuels - Sample preparation (ISO 14780:2017)
204 MT 345 EN ISO 12813:2015/A1:2017
205 MT 345 EN ISO 14823:2017
206 MT 345 EN 15213-1:2013
207 MT 345 EN 15213-2:2013
208 MT 345 EN 16062:2015
209 MT 345 EN 16102:2011
210 MT 345 EN 16454:2015
211 MT 345 EN ISO 17261:2012
212 MT 345 EN ISO 24978:2009
213 MT 345 EN 28701:2012
Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Quality assurance of automated measuring systems
Acoustics - Laboratory measurement of sound insulation of building elements - Part 1: Application rules for specific products (ISO 10140-1:2016)
Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 1: Frame document (ISO 10848-1:2017)
Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 2: Application to Type B elements when the junction has a small influence (ISO 10848-2:2017)
Characterization of waste - Leaching behaviour test - Up-flow percolation test (under specified conditions)
Characterization of waste - Leaching behaviour test - Influence of pH on leaching with initial acid/base addition
Characterization of waste - Halogen and sulfur content - Oxygen combustion in closed systems and determination methods
Electronic fee collection - Compliance check communication for autonomous systems - Amendment 1 (ISO 12813:2015/Amd 1:2017)
Intelligent transport systems - Graphic data dictionary (ISO 14823:2017)
Intelligent transport systems - After-theft systems for the recovery of stolen vehicles - Part 1: Reference architecture and terminology
Intelligent transport systems - After-theft systems for the recovery of stolen vehicles - Part 2: Common status message elements
Intelligent transport systems - ESafety - eCall high level application requirements (HLAP) using GSM/UMTS circuit switched networks
Intelligent transport systems - eCall - Operating requirements for third party support
Intelligent transport systems - ESafety - ECall end to end conformance testing
Intelligent transport systems - Automatic vehicle and equipment identification - Intermodal goods transport architecture and terminology (ISO 17261:2012)
Intelligent transport systems - ITS Safety and emergency messages using any available wireless media - Data registry procedures (ISO 24978:2009)
Intelligent transport systems - Public transport - Identification of Fixed Objects in Public Transport (IFOPT)
214 UE 1 EN 60034-12:2017
215 UE 6 CEN/CLC/ETSI TR 101550:2014
216 UE 6 CEN/CLC/ETSI TR 101551:2014
217 UE 6 CEN/CLC/ETSI/TR 101 552:2014
218 UE 30 EN 61000-4-29:2000
219 UE 30 EN 61000-4-4:2012
220 UE 36 EN 50598-2:2014/A1:2016
221 UE 39 EN ISO 544:2017
222 UE 52 EN 886:2004
223 UE 59 EN ISO 6103:2014
224 UE 78 EN ISO 15118-2:2016
225 UE 78 EN 15194:2017
226 UE 78 EN 16882:2016
227 UE 78 EN ISO 18246:2017
228 UE 95 EN ISO 10273:2017
229 UE 95 EN ISO 11290-2:2017
230 UE 95 EN ISO 16654:2001/A1:2017
231 UE 95 EN ISO 18465:2017
Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors
Documents relevant to EN 301 549 "Accessibility requirements suitable for public procurement of ICT products and services in Europe"
Guidelines on the use of accessibility award criteria suitable for public procurement of ICT products and services in Europe
Guidance for the application of conformity assessment to accessibility requirements for public procurement of ICT products and services in Europe
Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
Ecodesign for power drive systems, motor starters, power electronics & their driven applications - Part 2: Energy efficiency indicators for power drive systems and motor starters
Welding consumables - Technical delivery conditions for filler materials and fluxes - Type of product, dimensions, tolerances and markings (ISO 544:2017)
Chemicals used for treatment of water intended for human consumption - Polyaluminium hydroxide silicate sulfate
Bonded abrasive products - Permissible unbalances of grinding wheels as delivered - Static testing (ISO 6103:2014)
Road vehicles - Vehicle-to-grid communication Interface - Part 2: Network and application protocol requirements (ISO 15118-2:2014)
Cycles - Electrically power assisted cycles - EPAC Bicycles
Road vehicles - Security of the mechanical seals used on tachographs - Requirements and test procedures
Electrically propelled mopeds and motorcycles - Safety requirements for conductive connection to an external electric power supply (ISO 18246:2015)
Microbiology of the food chain - Horizontal method for the detection of pathogenic Yersinia enterocolitica (ISO 10273:2017)
Microbiology of the food chain - Horizontal method for the detection and enumeration of Listeria monocytogenes and of Listeria spp. - Part 2: Enumeration method (ISO 11290-2:2017)
Microbiology of food and animal feeding stuffs - Horizontal method for the detection of Escherichia coli O157 - Amendment 1: Annex B: Result of interlaboratory studies (ISO 16654:2001/Amd 1:2017)
Microbiology of the food chain - Quantitative determination of emetic toxin (cereulide) using LC-MS/MS (ISO 18465:2017)
232 UE 95 EN ISO 19020:2017
233 UE 95 EN ISO 21528-1:2017
234 UE 95 EN ISO 21528-2:2017
235 UE 95 EN ISO 21872-1:2017
236 UE 95 EN ISO 22964:2017
237 UE 108 EN 513:1999
238 UE 108 EN 917:1997
239 UE 108 EN 1120:1996
240 UE 108 EN 1228:1996
241 UE 108 EN 1277:2003
242 UE 108 EN 1393:1996
243 UE 108 EN 1394:1996
Microbiology of the food chain - Horizontal method for the immunoenzymatic detection of staphylococcal enterotoxins in foodstuffs (ISO 19020:2017)
Microbiology of the food chain - Horizontal method for the detection and enumeration of Enterobacteriaceae - Part 1: Detection of Enterobacteriaceae (ISO 21528-1:2017)
Microbiology of the food chain - Horizontal method for the detection and enumeration of Enterobacteriaceae - Part 2: Colony-count technique (ISO 21528-2:2017)
Microbiology of the food chain - Horizontal method for the determination of Vibrio spp. - Part 1: Detection of potentially enteropathogenic Vibrio parahaemolyticus, Vibrio cholerae and Vibrio vulnificus (ISO 21872-1:2017)
Microbiology of the food chain - Horizontal method for the detection of Cronobacter spp. (ISO 22964:2017)
Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the resistance to artificial weathering
Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leaktightness
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Determination of the resistance to chemical attack from the inside of a section in a deflected condition
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial specific ring stiffness
Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial longitudinal tensile properties
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength
244 UE 108 EN ISO 9080:2012
245 UE 108 EN ISO 13968:2008
246 UE 108 EN 14830:2006
247 UE 108 CEN/TS 16137:2011 Plastics - Determination of bio-based carbon content
248 UE 108 CEN/TS 16398:2012
249 UE 108 EN ISO 16871:2003
250 UE 109 EN 1434-2:2015 Heat meters - Part 2: Constructional requirements251 UE 113 CEN/TR 16220:2011
252 UE 113 EN 16516:2017
253 UE 113 CEN/TS 16637-3:2016
254 UE 113 CEN/TR 17105:2017
255 UE 113 CEN/TR 17113:2017
256 UE 118 EN 14322:2017
257 UE 118 EN 14323:2017
258 UE 118 EN 14354:2017 Wood-based panels - Wood veneer floor coverings
259 UE 118 CEN/TS 14966:2005
260 UE 122 EN 12150-1:2015
261 UE 122 EN 13541:2012
262 UE 122 EN 15682-1:2013
263 UE 146 EN 13146-1:2012+A1:2014
264 UE 146 EN 13146-4:2012+A1:2014
265 UE 146 EN 15839:2012+A1:2015
Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation (ISO 9080:2012)
Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility (ISO 13968:2008)
Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance
Plastics - Template for reporting and communication of bio-based carbon content and recovery options of biopolymers and bioplastics - Data sheet
Plastics piping and ducting systems - Plastics pipes and fittings - Method for exposure to direct (natural) weathering (ISO 16871:2003)
Construction products - Assessment of release of dangerous substances - Complement to sampling
Construction products: Assessment of release of dangerous substances - Determination of emissions into indoor air
Construction products - Assessment of release of dangerous substances - Part 3: Horizontal up-flow percolation test
Construction products - Assessment of release of dangerous substances - Guidance on the use of ecotoxicity tests applied to construction products
Construction products - Assessment of release of dangerous substances - Radiation from construction products - Dose assessment of emitted gamma radiation
Wood-based panels - Melamine faced board for interior uses - Definition, requirements and classification
Wood-based panels - Melamine faced boards for interior uses - Test methods
Wood-based panels - Small scale indicative test methods for certain mechanical properties
Glass in building - Thermally toughened soda lime silicate safety glass - Part 1: Definition and description
Glass in building - Security glazing - Testing and classification of resistance against explosion pressure
Glass in building - Heat soaked thermally toughened alkaline earth silicate safety glass - Part 1: Definition and description
Railway applications - Track - Test methods for fastening systems - Part 1: Determination of longitudinal rail restraint
Railway applications - Track - Test methods for fastening systems - Part 4: Effect of repeated loading
Railway applications - Testing for the acceptance of running characteristics of railway vehicles - Freight wagons - Testing of running safety under longitudinal compressive forces
266 UE 159 EN 50200:2015
267 UE 159 EN 50577:2015
268 UE 160 EN 50288-12-1:2017
269 UE 162 EN 60664-3:2017
270 UE 167 EN 50160:2010/A1:2015
271 UE 217 EN ISO 13943:2017 Fire safety - Vocabulary (ISO 13943:2017)
272 UE 238 CLC/TS 50594:2015
273 UE 238 EN 50597:2015 Energy Consumption of Vending Machines274 UE 270 EN 14045:2003
275 UE 270 EN ISO 16106:2006
276 UE 326 EN 14081-3:2012+A1:2017
277 UE 333 EN 61851-21-1:2017
278 UE 335 EN 15651-5:2017
279 UE 345 EN 15509:2014
280 UE 345 EN ISO 24534-1:2010
281 UE 345 EN ISO 24534-2:2010
282 UE 347 EN 772-5:2016
Method of test for resistance to fire of unprotected small cables for use in emergency circuits
Electric cables - Fire resistance test for unprotected electric cables (P classification)
Multi-element metallic cables used in analogue and digital communications and control - Part 12-1: Sectional specification for screened cables characterised from 1 MHz up to 2 000 MHz - Horizontal and building backbone cables
Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution
Voltage characteristics of electricity supplied by public electricity networks
Tumble dryers for commercial use - Methods for measuring the performance
Packaging - Evaluation of the disintegration of packaging materials in practical oriented tests under defined composting conditions
Packaging - Transport packages for dangerous goods - Dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings - Guidelines for the application of ISO 9001 (ISO 16106:2006)
Timber structures - Strength graded structural timber with rectangular cross section - Part 3: Machine grading; additional requirements for factory production control
Electric vehicle conductive charging system - Part 21-1: Electric vehicle on-board charger EMC requirements for conductive connection to an AC/DC supply
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 5: Assessment and verification of constancy of performance, marking and labelling
Electronic fee collection - Interoperability application profile for DSRC
Automatic vehicle and equipment identification - Electronic Registration Identification (ERI) for vehicles - Part 1: Architecture (ISO 24534-1:2010)
Automatic vehicle and equipment identification - Electronic Registration Identification (ERI) for vehicles - Part 2: Operational requirements (ISO 24534-2:2010)
Methods of test for masonry units - Part 5: Determination of the active soluble salts content of clay masonry units
283 UE 347 EN 772-5:2016/AC:2017
284 UE 360 CEN/TR 15310-1:2006
285 UE 360 CEN/TR 15310-2:2006
286 UE 360 CEN/TR 15310-3:2006
287 UE 360 CEN/TR 15310-4:2006
288 UE 360 CEN/TR 15310-5:2006
289 UE 360 EN 15408:2011
290 UE 360 EN 15410:2011
291 UE 360 EN 15411:2011
292 UE 360 EN 15413:2011
293 UE 360 EN 15443:2011
294 UE 360 EN 15936:2012
295 UE 360 EN 16167:2012
296 UE 373 EN ISO 2603:2016
297 UE 373 EN ISO 4043:2016
298 UE 373 EN ISO 20108:2017
299 UE 373 EN ISO 20109:2016
300 UE 373 CEN/TS 99001:2008
301 UE 377 ENV 737-6:2003
302 UE 377 EN 1865-3:2012+A1:2015
Methods of test for masonry units - Part 5: Determination of the active soluble salts content of clay masonry units
Characterization of waste - Sampling of waste materials - Part 1: Guidance on selection and application of criteria for sampling under various conditions
Characterization of waste - Sampling of waste materials - Part 2: Guidance on sampling techniques
Characterization of waste - Sampling of waste materials - Part 3: Guidance on procedures for sub-sampling in the field
Characterization of waste - Sampling of waste materials - Part 4: Guidance on procedures for sample packaging, storage, preservation, transport and delivery
Characterization of waste - Sampling of waste materials - Part 5: Guidance on the process of defining the sampling plan
Solid recovered fuels - Methods for the determination of sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br) content
Solid recovered fuels - Methods for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti)
Solid recovered fuels - Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn)
Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
Solid recovered fuels - Methods for the preparation of the laboratory sample
Sludge, treated biowaste, soil and waste - Determination of total organic carbon (TOC) by dry combustion
Sludge, treated biowaste and soil - Determination of polychlorinated biphenyls (PCB) by gas chromatography with mass selective detection (GC-MS) and gas chromatography with electron-capture detection (GC-ECD)
Simultaneous interpreting - Permanent booths - Requirements (ISO 2603:2016)
Simultaneous interpreting - Mobile booths - Requirements (ISO 4043:2016)
Simultaneous interpreting - Quality and transmission of sound and image input - Requirements (ISO 20108:2017)
Simultaneous interpreting - Equipment - Requirements (ISO 20109:2016)
Business support - Support services provided to small enterprises - Terminology, quality and performance
Medical gas pipeline systems - Part 6: Dimensions and allocation of probes for terminal units for compressed medical gases and vacuum
Patient handling equipment used in road ambulances - Part 3: Heavy duty stretcher
303 UE 377 EN 13726-3:2003
304 UE 377 EN 13726-4:2003
305 UE 377 EN 13726-6:2003
306 UE 388 CEN/TS 16931-2:2017
307 UE 388 CEN/TS 16931-3-1:2017
308 UE 388 EN 16931-1:2017
Non-active medical devices - Test methods for primary wound dressings - Part 3: Waterproofness
Non-active medical devices - Test methods for primary wound dressings - Part 4: Conformability
Non-active medical devices - Test methods for primary wound dressing - Part 6: Odour control
Electronic invoicing - Part 2: List of syntaxes that comply with EN 16931-1
Electronic invoicing - Part 3-1: Methodology for syntax bindings of the core elements of an electronic invoice
Electronic invoicing - Part 1: Semantic data model of the core elements of an electronic invoice
TC
CEN/SS F16
CEN/SS F16
CEN/SS F16
CEN/SS F16
CEN/SS F16
CEN/SS F16
CEN/SS F16
CEN/SS F16
CEN/TC 70
CEN/TC 70
CEN/TC 72
CEN/TC 192
CEN/TC 191
CEN/TC 127
CEN/TC 127
CEN/TC 127
CEN/TC 230
CEN/TC 164
CEN/TC 230
CEN/TC 164
CEN/TC 164
CEN/TC 164
CEN/TC 230
CEN/SS F12
CEN/SS F12
CEN/SS F12
CEN/SS F12
CEN/SS F12
CEN/SS F12
CEN/SS F12
CLC/TC 64
CLC/TC 64
CEN/TC 247
CEN/TC 247
CEN/TC 247
CEN/TC 247
CEN/TC 53
CEN/TC 53
CEN/TC 169
CEN/TC 169
CEN/TC 89
CEN/TC 89
CEN/TC 89
CEN/TC 89
CEN/TC 89
CEN/TC 89
CEN/TC 89
CEN/TC 89
CEN/TC 89
CEN/TC 89
CEN/TC 89
CEN/TC 89
CEN/TC 89
CEN/TC 89
CEN/TC 89
CEN/TC 89
CEN/TC 89
CEN/TC 107
CEN/TC 107
CEN/TC 107
CEN/TC 156
CEN/TC 156
CEN/TC 312
CEN/TC 228
CEN/TC 228
CEN/TC 228
CEN/TC 228
CEN/TC 228
CEN/TC 156
CEN/TC 312
CEN/TC 156
CEN/TC 156
CEN/TC 156
CEN/TC 130
CEN/TC 130
CEN/TC 130
CEN/TC 130
CEN/TC 228
CEN/TC 228
CEN/TC 228
CEN/TC 195
CEN/TC 156
CEN/TC 156
CEN/TC 156
CEN/TC 156
CEN/TC 156
CEN/TC 156
CEN/TC 156
CEN/TC 156
CEN/TC 156
CEN/TC 156
CEN/TC 156
CEN/TC 156
CEN/TC 156
CEN/TC 156
CEN/TC 156
CEN/TC 156
CEN/TC 156
CEN/TC 156
CEN/TC 156
CEN/TC 156
CEN/TC 156
CEN/TC 156
CEN/TC 156
CEN/TC 156
CEN/TC 156
CEN/TC 156
CEN/TC 195
CEN/TC 312
CEN/TC 312
CEN/TC 104
CEN/TC 104
CEN/TC 104
CEN/TC 250
CEN/TC 250
CEN/TC 250
CEN/TC 250
CEN/TC 250
CEN/TC 250
CLC/TC 81X
CEN/TC 341
CLC/SR 36
CLC/SR 104
CLC/SR 104
CLC/SR 104
CLC/SR 104
CLC/TC 65X
CLC/TC 65X
CLC/TC 65X
CLC/TC 65X
CLC/SR 29
CLC/SR 29
CLC/TC 79
CEN/TC 121
CEN/TC 121
CEN/TC 121
CEN/TC 290
CEN/TC 290
CEN/TC 290
CEN/TC 290
CEN/SS F02
CEN/TC 185
CEN/TC 185
CEN/TC 136
CEN/TC 136
CEN/TC 188
CEN/TC 248
CEN/TC 248
CEN/TC 248
CEN/TC 237
CEN/TC 237
CLC/TC 34
CLC/TC 34
CLC/TC 34
CLC/SR 48B
CLC/TC 13
CLC/TC 13
CLC/TC 13
CLC/TC 13
CLC/TC 13
CEN/TC 247
CEN/TC 269
CEN/TC 269
CEN/TC 269
CEN/TC 57
CEN/TC 57
CEN/TC 123
CEN/TC 123
CEN/TC 123
CEN/TC 123
CEN/TC 123
CEN/TC 123
CEN/TC 123
CEN/TC 23
CEN/TC 23
CEN/TC 23
CEN/TC 23
CLC/TC 59X
CEN/TC 298
CEN/TC 298
CEN/TC 298
CEN/TC 234
CEN/TC 234
CEN/TC 238
CEN/SS N21
CEN/TC 408
CEN/TC 234
CEN/TC 238
CLC/TC 111X
CLC/TC 111X
CLC/TC 111X
CLC/TC 111X
CLC/TC 111X
CEN/TC 137
CEN/TC 264
CEN/TC 264
CEN/TC 126
CEN/TC 126
CEN/TC 126
CEN/TC 444
CEN/TC 444
CEN/TC 444
CEN/TC 335
CEN/TC 278
CEN/TC 278
CEN/TC 278
CEN/TC 278
CEN/TC 278
CEN/TC 278
CEN/TC 278
CEN/TC 278
CEN/TC 278
CEN/TC 278
CLC/TC 2
CLC/TC 210
CLC/TC 210
CLC/TC 22X
CEN/TC 121
CEN/TC 164
CEN/TC 143
CEN/TC 301
CEN/TC 333
CEN/TC 301
CEN/TC 301
CEN/TC 275
CEN/TC 275
CEN/TC 275
CEN/TC 275
CEN/CLC/ETSI/JWG eAcc
CEN/CLC/ETSI/JWG eAcc
CEN/CLC/ETSI/JWG eAcc
CEN/TC 275
CEN/TC 275
CEN/TC 275
CEN/TC 275
CEN/TC 275
CEN/TC 249
CEN/TC 155
CEN/TC 155
CEN/TC 155
CEN/TC 155
CEN/TC 155
CEN/TC 155
CEN/TC 155
CEN/TC 155
CEN/TC 155
CEN/TC 249
CEN/TC 249
CEN/TC 155
CEN/TC 176CEN/TC 351
CEN/TC 351
CEN/TC 351
CEN/TC 351
CEN/TC 351
CEN/TC 112
CEN/TC 112
CEN/TC 112
CEN/TC 112
CEN/TC 129
CEN/TC 129
CEN/TC 129
CEN/TC 256
CEN/TC 256
CEN/TC 256
CLC/TC 20
CLC/TC 20
CLC/TC 46X
CLC/SR 109
CLC/TC 8X
CEN/TC 127
CLC/TC 59X
CLC/TC 59XCEN/TC 261
CEN/TC 261
CEN/TC 124
CLC/TC 69X
CEN/TC 349
CEN/TC 278
CEN/TC 278
CEN/TC 278
CEN/TC 125
CEN/TC 125
CEN/TC 292
CEN/TC 292
CEN/TC 292
CEN/TC 292
CEN/TC 292
CEN/TC 343
CEN/TC 343
CEN/TC 343
CEN/TC 343
CEN/TC 343
CEN/TC 444
CEN/TC 444
CEN/SS A07
CEN/SS A07
CEN/SS A07
CEN/SS A07
CEN/TC 374
CEN/TC 215
CEN/TC 239
CEN/TC 205
CEN/TC 205
CEN/TC 205
CEN/TC 434
CEN/TC 434
CEN/TC 434
SECTIUNEA 1, CAPITOLUL 2
Standarde europene propuse a se adopta ca standarde române prin publicarea notei de confirmare
Minister CT Indicativ EN Titlu
1 MADR 95 EN 12014-2:2017
2 MADR 95 EN ISO 12099:2017
3 MADR 95 EN 15510:2017
4 MADR 95 EN 15550:2017
5 MADR 95 EN 15621:2017
6 MADR 95 EN 16939:2017
7 MADR 95 EN 17049:2018
8 MADR 95 EN 17050:2017
9 MADR 95 EN 17053:2018
10 MADR 105 EN 13368-2:2017
11 MADR 180 EN ISO 6571:2009/A1:2017
12 MADR 180 EN ISO 10399:2018
13 MADR 180 EN ISO 11746:2012/A1:2017
Nr crt
Foodstuffs - Determination of nitrate and/or nitrite content - Part 2: HPLC/IC method for the determination of nitrate content of vegetables and vegetable products
Animal feeding stuffs, cereals and milled cereal products - Guidelines for the application of near infrared spectrometry (ISO 12099:2017)
Animal feeding stuffs: Methods of sampling and analysis - Determination of calcium, sodium, phosphorus, magnesium, potassium, iron, zinc, copper, manganese, cobalt, molybdenum and lead by ICP-AES
Animal feeding stuffs: Methods of sampling and analysis - Determination of cadmium and lead by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion
Animal feeding stuffs: Methods of sampling and analysis - Determination of calcium, sodium, phosphorus, magnesium, potassium, sulphur, iron, zinc, copper, manganese and cobalt after pressure digestion by ICP-AES
Animal feeding stuffs: Methods of sampling and analysis - Detection of tylosin, spiramycin and virginiamycin - Thin Layer Chromatography and bioautography
Animal feeding stuffs: Methods of sampling and analysis - Identification of tylosin, spiramycin, virginiamycin, carbadox and olaquindox at sub-additive levels in compound feed - Confirmatory analysis by LC-MS
Animal feeding stuffs: Methods of sampling and analysis - Determination of iodine in animal feed by ICP-MS
Animal feeding stuffs: Methods of sampling and analysis - Determination of trace elements, heavy metals and other elements in feed by ICP-MS (multi-method)
Fertilizers - Determination of chelating agents in fertilizers by chromatography - Part 2: Determination of Fe chelated by [o,o] EDDHA, [o,o] EDDHMA and HBED, or the amount of chelating agents, by ion pair chromatography
Spices, condiments and herbs - Determination of volatile oil content (hydrodistillation method) - Amendment 1 (ISO 6571:2008/Amd 1:2017)
Sensory analysis - Methodology - Duo-trio test (ISO 10399:2017)
Rice - Determination of biometric characteristics of kernels - Amendment 1 (ISO 11746:2012/Amd 1:2017)
14 MADR 180 EN ISO 21294:2017
15 MADR 285 EN ISO 11504:2017
16 MAI 216 EN 1568-1:2018
17 MAI 216 EN 1568-2:2018
18 MAI 216 EN 1568-4:2018
19 MAI 216 EN 15004-10:2017
20 MAI 216 EN 15004-7:2017
21 MAI 216 EN 15004-8:2017
22 MAI 216 EN 15004-9:2017
23 MAI 216 EN 16750:2017
24 MAI 217 EN 1364-2:2018
25 MAI 217 EN 1634-1:2014+A1:2018
26 MAI 217 EN ISO 13943:2017 Fire safety - Vocabulary (ISO 13943:2017)
27 MAI 217 EN 15882-1:2011+A1:2017
28 MAP 52 EN 816:2017 Sanitary tapware - Automatic shut-off valves PN 10
29 MAP 52 EN 1111:2017
30 MAP 52 EN 1287:2017
31 MAP 52 EN 1406:2017
32 MAP 52 EN ISO 7393-2:2018
33 MAP 52 EN ISO 9696:2017
Oilseeds - Manual or automatic discontinuous sampling (ISO 21294:2017)
Soil quality - Assessment of impact from soil contaminated with petroleum hydrocarbons (ISO 11504:2017)
Fire extinguishing media - Foam concentrates - Part 1: Specification for medium expansion foam concentrates for surface application to water-immiscible liquids
Fire extinguishing media - Foam concentrates - Part 2: Specification for high expansion foam concentrates for surface application to water-immiscible liquids
Fire extinguishing media - Foam concentrates - Part 4: Specification for low expansion foam concentrates for surface application to water-miscible liquids
Fixed firefighting systems - Gas extinguishing systems - Part 10: Physical properties and system design of gas extinguishing systems for IG-541 (ISO 14520-15:2015, modified)
Fixed firefighting systems - Gas extinguishing systems - Part 7: Physical properties and system design of gas extinguishing systems for IG-01 extinguishant (ISO 14520-12:2015, modified)
Fixed firefighting systems - Gas extinguishing systems - Part 8: Physical properties and system design of gas extinguishing systems for IG-100 extinguishant (ISO 14520-13:2015, modified)
Fixed firefighting system - Gas extinguishing systems - Part 9: Physical properties and system design of gas extinguishing systems for IG-55 extinguishant (ISO 14520-14:2015, modified)
Fixed firefighting systems - Oxygen reduction systems - Design, installation, planning and maintenance
Fire resistance tests for non-loadbearing elements - Part 2: Ceilings
Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware - Part 1: Fire resistance test for door and shutter assemblies and openable windows
Extended application of results from fire resistance tests for service installations - Part 1: Ducts
Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification
Sanitary tapware - Low pressure thermostatic mixing valves - General technical specification
Chemicals used for treatment of water intended for human consumption - Modified starches
Water quality - Determination of free chlorine and total chlorine - Part 2: Colorimetric method using N,N-dialkyl-1,4-phenylenediamine, for routine control purposes (ISO 7393-2:2017)
Water quality - Gross alpha activity - Test method using thick source (ISO 9696:2017)
34 MAP 52 EN 17034:2018
35 MAP 52 EN ISO 19340:2017
36 MCIN 380 EN 15759-2:2018
37 MCIN 380 EN 16893:2018
38 MCSI 6 EN 62802:2017
39 MCSI 6 EN 300 718-1 V2.1.1:2018
40 MCSI 6 EN 300 718-2 V2.1.1:2018
41 MCSI 6 EN 302 054 V2.2.1:2018
42 MCSI 6 EN 303 454 V1.1.1:2018
43 MCSI 6 EN 305 174-1 V1.1.1:2018
44 MCSI 6 EN 305 174-2 V1.1.1:2018
45 MCSI 6 EN 305 174-8 V1.1.1:2018
46 MCSI 6 EN 305 200-2-1 V1.1.1:2018
47 MCSI 6 EN 305 200-3-1 V1.1.1:2018
48 MCSI 30 EN 61000-6-5:2015/AC:2018-01
49 MCSI 138 EN 60793-1-33:2017
Chemicals used for treatment of water intended for human consumption - Aluminium chloride anhydrous, aluminium chloride basic, dialuminium chloride pentahydroxide and aluminium chloride hydroxide sulfate
Water quality - Determination of dissolved perchlorate - Method using ion chromatography (IC) (ISO 19340:2017)
Conservation of cultural heritage - Indoor climate - Part 2: Ventilation management for the protection of cultural heritage buildings and collections
Conservation of Cultural Heritage - Specifications for location, construction and modification of buildings or rooms intended for the storage or use of heritage collections
Measurement methods of a half-wavelength voltage and a chirp parameter for Mach-Zehnder optical modulators in high-frequency radio on fibre (RoF) Systems
Avalanche Beacons operating at 457 kHz; Transmitter-receiver systems; Part 1: Harmonised Standard for access to radio spectrum
Avalanche Beacons operating at 457 kHz; Transmitter-receiver systems; Part 2: Harmonised Standard for features for emergency services
Meteorological Aids (Met Aids); Radiosondes to be used in the 400,15 MHz to 406 MHz frequency range with power levels ranging up to 200 mW; Harmonised Standard for access to radio spectrum
Short Range Devices (SRD); Metal and object detection sensors in the frequency range 1 kHz to 148,5 kHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU
Access, Terminals, Transmission and Multiplexing (ATTM); Broadband Deployment and Lifecycle Resource Management; Part 1: Overview, common and generic aspects
Access, Terminals, Transmission and Multiplexing (ATTM); Broadband Deployment and Lifecycle Resource Management; Part 2: ICT Sites
Access, Terminals, Transmission and Multiplexing (ATTM); Broadband Deployment and Lifecycle Resource Management; Part 8: Management of end of life of ICT equipment (ICT waste/end of life)
Access, Terminals, Transmission and Multiplexing (ATTM); Energy management; Operational infrastructures; Global KPIs; Part 2: Specific requirements; Sub-part 1: ICT Sites
Access, Terminals, Transmission and Multiplexing (ATTM); Energy management; Operational infrastructures; Global KPIs; Part 3: ICT Sites; Sub-part 1: DCEM
Electromagnetic compatibility (EMC) - Part 6-5: Generic standards - Immunity for equipment used in power station and substation environment
Optical fibres - Part 1-33: Measurement methods and test procedures - Stress corrosion susceptibility
50 MCSI 138 EN 60793-1-48:2017
51 MCSI 138 EN 60793-2-10:2017
52 MCSI 138 EN IEC 60793-1-45:2018
53 MCSI 138 EN IEC 60793-1-47:2018
54 MCSI 138 EN 60794-2:2017
55 MCSI 138 EN IEC 60794-1-22:2018
56 MCSI 138 EN 60794-1-3:2017
57 MCSI 138 EN 61280-4-4:2017
58 MCSI 138 EN 61745:2017
59 MCSI 138 EN 61753-121-2:2017
60 MCSI 138 EN 61757-2-2:2017
61 MCSI 138 EN IEC 62148-1:2018
62 MCSI 138 EN 62150-5:2017
63 MCSI 138 EN 62343:2017 Dynamic modules - General and guidance
64 MCSI 138 EN 62496-2:2017
65 MCSI 204 EN 419212-2:2017
66 MCSI 204 EN 419212-1:2017
67 MCSI 204 EN 419212-3:2017
68 MCSI 207 EN 50090-3-4:2017
69 MCSI 207 EN 50090-6-1:2017
Optical fibres - Part 1-48: Measurement methods and test procedures - Polarization mode Dispersion
Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres
Optical fibres - Part 1-45: Measurement methods and test procedures - Mode field diameter
Optical fibres - Part 1-47: Measurement methods and test procedures - Macrobending loss
Optical fibre cables - Part 2: Indoor cables - Sectional specification
Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods
Optical fibre cables - Part 1-3: Generic specification - Optical cable elements
Fibre optic communication subsystem test procedures - Part 4-4: Cable plants and links - Polarization mode dispersion measurement for installed links
End-face image analysis procedure for the calibration of optical fibre geometry test sets
Fibre optic interconnecting devices and passive components - Performance standard - Part 121-2: Simplex and duplex cords with single-mode fibre and cylindrical ferrule connectors for category C - Controlled environment
Fibre optic sensors - Part 2-2: Temperature measurement - Distributed sensing
Fibre optic active components and devices - Package and interface standards - Part 1: General and guidance
Fibre optic active components and devices - Test and measurement procedures - Part 5: Wavelength channel tuning time of tuneable transmitters
Optical circuit boards - Basic test and measurement procedures - Part 2: General guidance for definition of measurement conditions for optical characteristics of optical circuit boards
Application Interface for Secure Elements for Electronic Identification, Authentication and Trusted Services - Part 2: Signature and Seal Services
Application Interface for Secure Elements for Electronic Identification, Authentication and Trusted Services - Part 1: Introduction and common definitions
Application Interface for Secure Elements for Electronic Identification, Authentication and Trusted Services - Part 3: Device authentication protocols
Home and Building Electronic Systems (HBES) - Part 3-4: Secure Application Layer, Secure Service, Secure configuration and security Resources
Home and Building Electronic Systems (HBES) - Part 6-1: Interfaces - Webservice interface
70 MCSI 207 EN 50174-3:2013/A1:2017
71 MCSI 207 EN IEC 63044-3:2018
72 MCSI 220 EN 300 175-1 V2.7.1:2017
73 MCSI 220 EN 300 175-2 V2.7.1:2017
74 MCSI 220 EN 300 175-3 V2.7.1:2017
75 MCSI 220 EN 300 175-4 V2.7.1:2017
76 MCSI 220 EN 300 175-5 V2.7.1:2017
77 MCSI 220 EN 300 175-6 V2.7.1:2017
78 MCSI 220 EN 300 175-7 V2.7.1:2017
79 MCSI 220 EN 300 175-8 V2.7.1:2017
80 MCSI 220 EN 300 176-1 V2.3.1:2018
81 MCSI 220 EN 300 392-3-3 V1.4.1:2017
82 MCSI 220 EN 301 598 V2.1.1:2018
83 MCSI 268 EN 301 001-1 V1.2.2:1998
84 MCSI 268 EN 301 001-2 V1.2.2:1998
85 MCSI 268 EN 301 001-3 V1.1.3:1998
Information technology - Cabling installation - Part 3: Installation planning and practices outside buildings
Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 3: Electrical safety requirements
Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 1: Overview
Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 2: Physical Layer (PHL)
Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 3: Medium Access Control (MAC) layer
Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 4: Data Link Control (DLC) layer
Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 5: Network (NWK) layer
Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 6: Identities and addressing
Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 7: Security features
Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 8: Speech and audio coding and transmission
Digital Enhanced Cordless Telecommunications (DECT); Test specification; Part 1: Radio
Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 3: Interworking at the Inter-System Interface (ISI); Sub-part 3: Additional Network Feature Group Call (ANF-ISIGC)
White Space Devices (WSD); Wireless Access Systems operating in the 470 MHz to 790 MHz TV broadcast band; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU
Integrated Services Digital Network (ISDN); Outgoing Call Barring (OCB) supplementary services; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 1: Protocol specification
Integrated Services Digital Network (ISDN); Outgoing Call Barring (OCB) supplementary services; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification
Integrated Services Digital Network (ISDN); Outgoing Call Barring (OCB) supplementary services; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user
86 MCSI 268 EN 301 001-4 V1.1.4:1999
87 MCSI 268 EN 301 001-5 V1.1.3:1998
88 MCSI 268 EN 301 001-6 V1.1.4:1999
89 MCSI 268 EN 301 002-4 V1.2.1:2001
90 MCSI 268 EN 301 002-5 V1.2.1:2001
91 MCSI 268 EN 301 002-6 V1.2.1:2001
92 MCSI 268 EN 301 003-1 V1.1.3:1999
93 MCSI 268 EN 301 003-2 V1.1.3:1999
94 MCSI 268 EN 301 004-1 V1.1.3:1998
Integrated Services Digital Network (ISDN); Outgoing Call Barring (OCB) supplementary services; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the user
Integrated Services Digital Network (ISDN); Outgoing Call Barring (OCB) supplementary services; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network
Integrated Services Digital Network (ISDN); Outgoing Call Barring (OCB) supplementary services; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network
Integrated Services Digital Network (ISDN); Security tools (SET) procedures; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the user
Integrated Services Digital Network (ISDN); Security tools (SET) procedures; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network
Integrated Services Digital Network (ISDN); Security tools (SET) procedures; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network
Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; Peak cell rate modification by the connection owner; Part 1: Protocol specification [ITU-T Recommendation Q.2963.1 (1996), modified]
Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; Peak cell rate modification by the connection owner; Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification
Broadband Integrated Services Digital Network (B-ISDN); Signalling System No.7; Message Transfer Part (MTP) level 3 functions and messages to support international interconnection; Part 1: Protocol specification [ITU-T Recommendation Q.2210 (1996), modified]
95 MCSI 268 EN 301 005-1 V1.1.4:1998
96 MCSI 268 EN 301 005-2 V1.1.5:1998
97 MCSI 268 EN 301 006-1 V1.2.3:1998
98 MCSI 268 EN 301 007-1 V1.1.3:1998
99 MCSI 268 EN 301 008 V1.1.2:1998
100 MCSI 269 ETS 300 934 ed5:1998
101 MCSI 269 ETS 300 936 ed1:1997
102 MCSI 269 ETS 300 939 ed2:1997
103 MCSI 269 ETS 300 941 ed1:1997
104 MCSI 269 ETS 300 942 ed2:1997
105 MCSI 269 EN 300 943 V7.0.1:2000
106 MCSI 269 EN 300 944 V8.0.1:2000
107 MCSI 269 EN 300 945 V7.0.3:1999
108 MCSI 269 ETS 300 946 ed7:2000
V interfaces at the digital Service Node (SN); Interfaces at the VB5.1 reference point for the support of broadband or combined narrowband and broadband Access Networks (ANs); Part 1: Interface specification
V interfaces at the digital Service Node (SN); Interfaces at the VB5.1 reference point for the support of broadband or combined narrowband and broadband Access Networks (ANs); Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification
Q3 interface at the Local Exchange (LE) for line and circuit testing of analogue and Integrated Services Digital Network (ISDN) subscriber lines; Part 1: Q3 interface specification
Integrated Services Digital Network (ISDN); Signalling System No.7; Operations, Maintenance and Administration Part (OMAP); Part 1: Protocol specification
Integrated Services Digital Network (ISDN); Signalling System No.7; Signalling Connection Control Part (SCCP); Interoperability test specification
Digital cellular telecommunications system (Phase 2+) (GSM); Voice Broadcast Service (VBS); Stage 2 (GSM 03.69 version 5.5.1)
Digital cellular telecommunications system; Layer 1; General requirements (GSM 04.04 version 5.0.1)
Digital cellular telecommunications system (Phase 2+) (GSM); Mobile radio interface signalling layer 3; General aspects (GSM 04.07 version 5.2.1)
Digital cellular telecommunications system; Mobile radio interface layer 3; Supplementary services specification; General aspects (GSM 04.10 version 5.0.1)
Digital cellular telecommunications system (Phase 2+) (GSM); Point-to-Point (PP) Short Message Service (SMS) support on mobile radio interface (GSM 04.11 version 5.2.1)
Digital cellular telecommunications system (Phase 2+) (GSM); Short Message Service Cell Broadcast (SMSCB) support on the mobile radio interface (GSM 04.12 version 7.0.1 Release 1998)
Digital cellular telecommunications system (Phase 2+) (GSM); Performance requirements on the mobile radio interface (GSM 04.13 version 8.0.1 Release 1999)
Digital cellular telecommunications system (Phase 2+) (GSM); Rate adaption on the Mobile Station - Base Station System (MS - BSS) Interface (GSM 04.21 version 7.0.3 Release 1998)
Digital cellular telecommunications system (Phase 2+) (GSM); Radio Link Protocol (RLP) for data and telematic services on the Mobile Station - Base Station System (MS - BSS) interface and the Base Station System - Mobile-services Switching Centre (BSS - MSC) interface (GSM 04.22 version 5.6.1 Release 1996)
109 MCSI 269 EN 300 947 V7.0.1:2000
110 MCSI 269 EN 300 948 V8.0.1:2000
111 MCSI 269 EN 300 949 V8.0.1:2000
112 MCSI 269 ETS 300 950 ed4:1999
113 MCSI 269 EN 300 952 V7.0.2:1999
114 MCSI 269 EN 300 953 V7.0.1:2000
115 MCSI 269 EN 300 954 V7.0.1:2000
116 MCSI 269 EN 300 955 V7.0.1:2000
117 MCSI 269 ETS 300 956 ed2:1998
118 MCSI 269 EN 300 957 V7.0.1:2000
119 MCSI 269 EN 300 958 V7.0.1:2000
120 MCSI 269 EN 300 959 V8.1.2:2001
121 MCSI 269 EN 300 960 V8.0.1:2000
122 MCSI 269 EN 300 961 V8.1.1:2000
123 MCSI 269 EN 300 962 V8.0.1:2000
124 MCSI 269 EN 300 963 V8.0.1:2000
Digital cellular telecommunications system (Phase 2+) (GSM); enhanced Multi-Level Precedence and Pre-emption service (eMLPP); Stage 3 (GSM 04.67 version 7.0.0 Release 1998)
Digital cellular telecommunications system (Phase 2+) (GSM); Group Call Control (GCC) protocol (GSM 04.68 version 8.0.1 Release 1999)
Digital cellular telecommunications system (Phase 2+) (GSM); Broadcast Call Control (BCC) protocol (GSM 04.69 version 8.0.1 Release 1998)
Digital cellular telecommunications system (Phase 2+) (GSM); Mobile radio interface layer 3 supplementary services specification; Formats and coding (GSM 04.80 version 5.3.1 Release 1996)
Digital cellular telecommunications system (Phase 2+) (GSM); Call Forwarding (CF) supplementary services; Stage 3 (GSM 04.82 version 7.0.2 Release 1998)
Digital cellular telecommunications system (Phase 2+) (GSM); Call Waiting (CW) and Call Hold (HOLD) supplementary services; Stage 3 (GSM 04.83 version 7.0.1 Release 1998)
Digital cellular telecommunications system (Phase 2+) (GSM); Multi Party (MPTY) supplementary services; Stage 3 (GSM 04.84 version 7.0.1 Release 1998)
Digital cellular telecommunications system (Phase 2+) (GSM); Advice of Charge (AoC) supplementary services; Stage 3 (GSM 04.86 version 7.0.1 Release 1998)
Digital cellular telecommunications system (Phase 2+) (GSM); Call Barring (CB) supplementary services; Stage 3 (GSM 04.88 version 5.1.0)
Digital cellular telecommunications system (Phase 2+) (GSM); Unstructured Supplementary Service Data (USSD); Stage 3 (GSM 04.90 version 7.0.1 Release 1998)
Digital cellular telecommunications system (Phase 2+) (GSM); Explicit Call Transfer (ECT) supplementary service; Stage 3 (GSM 04.91 version 7.0.1 Release 1998)
Digital cellular telecommunications system (Phase 2+) (GSM); Modulation (GSM 05.04 version 8.1.2 Release 1999)
Digital cellular telecommunications system (Phase 2+) (GSM); Full rate speech; Processing functions (GSM 06.01 version 8.0.1 Release 1999)
Digital cellular telecommunications system (Phase 2+) (GSM); Full rate speech; Transcoding (GSM 06.10 version 8.1.1 Release 1999)
Digital cellular telecommunications system (Phase 2+) (GSM); Full rate speech; Substitution and muting of lost frames for full rate speech channels (GSM 06.11 version 8.0.1 Release 1999)
Digital cellular telecommunications system (Phase 2+) (GSM); Full rate speech; Comfort noise aspect for full rate speech traffic channels (GSM 06.12 version 8.0.1 Release 1999)
125 MCSI 269 EN 300 964 V8.0.1:2000
126 MCSI 269 EN 300 965 V8.0.1:2000
127 MCSI 269 EN 300 966 V8.0.1:2000
128 MCSI 269 EN 300 967 V8.0.1:2000
129 MCSI 269 EN 300 968 V8.0.1:2000
130 MCSI 269 EN 300 969 V8.0.1:2000
131 MCSI 269 EN 300 970 V8.0.1:2000
132 MCSI 269 EN 300 971 V8.0.1:2000
133 MCSI 269 EN 300 972 V8.0.1:2000
134 MCSI 269 EN 300 973 V8.0.1:2000
135 MCSI 269 ETS 300 974 ed11:2000
136 MCSI 269 ETS 300 975 ed1:1997
137 MCSI 269 ETS 300 976 ed9:2000
138 MCSI 269 ETS 300 977 ed5:1998
Digital cellular telecommunications system (Phase 2+) (GSM); Full rate speech; Discontinuous Transmission (DTX) for full rate speech traffic channels (GSM 06.31 version 8.0.1 Release 1999)
Digital cellular telecommunications system (Phase 2+) (GSM); Full rate speech; Voice Activity Detector (VAD) for full rate speech traffic channels (GSM 06.32 version 8.0.1 Release 1999)
Digital cellular telecommunications system (Phase 2+) (GSM); Half rate speech; Half rate speech processing functions (GSM 06.02 version 8.0.1 Release 1999)
Digital cellular telecommunications system (Phase 2+) (GSM); Half rate speech; ANSI-C code for the GSM half rate speech codec (GSM 06.06 version 8.0.1 Release 1999)
Digital cellular telecommunications system (Phase 2+) (GSM); Half rate speech; Test sequences for the GSM half rate speech codec (GSM 06.07 version 8.0.1 Release 1999)
Digital cellular telecommunications system (Phase 2+) (GSM); Half rate speech; Half rate speech transcoding (GSM 06.20 version 8.0.1 Release 1999)
Digital cellular telecommunications system (Phase 2+) (GSM); Half rate speech; Substitution and muting of lost frames for half rate speech traffic channels (GSM 06.21 version 8.0.1 Release 1999)
Digital cellular telecommunications system (Phase 2+) (GSM); Half rate speech; Comfort noise aspects for the half rate speech traffic channels (GSM 06.22 version 8.0.1 Release 1999)
Digital cellular telecommunications system (Phase 2+) (GSM); Half rate speech; Discontinuous Transmission (DTX) for half rate speech traffic channels (GSM 06.41 version 8.0.1 Release 1999)
Digital cellular telecommunications system (Phase 2+) (GSM); Half rate speech; Voice Activity Detector (VAD) for half rate speech traffic channels (GSM 06.42 version 8.0.1 Release 1999)
Digital cellular telecommunications system (Phase 2+) (GSM); Mobile Application Part (MAP) specification (GSM 09.02 version 5.15.1 Release 1996)
Digital cellular telecommunications system (Phase 2+) (GSM); Interworking between a Public Land Mobile Network (PLMN)and a Packet Switched Public Data Network/Integrated Services Digital Network (PSPDN/ISDN) for the support of packet switched data transmission services (GSM 09.06 version 5.0.2)
Digital cellular telecommunications system (Phase 2+) (GSM); General requirements on interworking between the Public Land Mobile Network (PLMN) and the Integrated Services Digital Network (ISDN) or Public Switched Telephone Network (PSTN) (GSM 09.07 version 5.10.1 Release 1996)
Digital cellular telecommunications system (Phase 2+) (GSM); Specification of the Subscriber Identity Module - Mobile Equipment (SIM - ME) interface (GSM 11.11 version 5.10.1 Release 1996)
139 MCSI 269 EN 300 979 V8.0.1:2000
140 MCSI 269 EN 303 980 V1.1.1:2017
141 MCSI 279 EN 50360:2017
142 MCSI 279 EN 50385:2017
143 MCSI 279 EN 50401:2017
144 MCSI 279 EN 50566:2017
145 MCSI 319 EN ISO 11073-10101:2005/A1:2017
146 MCSI 319 EN ISO 11073-10424:2016/AC:2018
147 MCSI 319 EN ISO 11615:2017
148 MCSI 319 EN ISO 11616:2017
149 MCSI 319 EN ISO 12052:2017
150 MCSI 375 EN 60728-13-1:2017
151 MCSI 375 EN IEC 60728-3:2018
Digital cellular telecommunications system (Phase 2+) (GSM); In-band control of remote transcoders and rate adaptors for half rate traffic channels (GSM 08.61 version 8.0.1 Release 1999)
Satellite Earth Stations and Systems (SES); Harmonised Standard for fixed and in-motion Earth Stations communicating with non-geostationary satellite systems (NEST) in the 11 GHz to 14 GHz frequency bands covering essential requirements of article 3.2 of Directive 2014/53/EU
Product standard to demonstrate the compliance of wireless communication devices, with the basic restrictions and exposure limit values related to human exposure to electromagnetic fields in the frequency range from 300 MHz to 6 GHz: devices used next to the ear
Product standard to demonstrate the compliance of base station equipment with radiofrequency electromagnetic field exposure limits (110 MHz - 100 GHz), when placed on the market
Product standard to demonstrate the compliance of base station equipment with radiofrequency electromagnetic field exposure limits (110 MHz - 100 GHz), when put into service
Product standard to demonstrate the compliance of wireless communication devices with the basic restrictions and exposure limit values related to human exposure to electromagnetic fields in the frequency range from 30 MHz to 6 GHz: hand-held and body mounted devices in close proximity to the human body
Health informatics - Point-of-care medical device communication - Part 10101: Nomenclature - Amendment 1: Additional definitions (ISO/IEEE 11073-10101:2004/Amd 1:2017)
Health informatics - Personal health device communication - Part 10424: Device specialization - Sleep apnoea breathing therapy equipment (SABTE) - Technical Corrigendum 1 (ISO/IEEE 11073-10424:2016/Cor 1:2018)
Health informatics - Identification of medicinal products - Data elements and structures for the unique identification and exchange of regulated medicinal product information (ISO 11615:2017)
Health informatics - Identification of medicinal products - Data elements and structures for the Unique Identification and Exchange of regulated Pharmaceutical Product Information (ISO 11616:2017)
Health informatics - Digital imaging and communication in medicine (DICOM) including workflow and data management (ISO 12052:2017)
Cable networks for television signals, sound signals and interactive services - Part 13-1: Bandwidth expansion for broadcast signal over FTTH system
Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for cable networks (TA 5)
152 MCSI 375 EN IEC 61938:2018
153 MCSI 375 EN 62680-1-3:2017
154 MCSI 375 EN 62827-2:2017
155 MCSI 375 EN IEC 62919:2018
156 MCSI 375 EN 63005-1:2017
157 MCSI 375 EN 63028:2017
158 MCSI 375 EN 63029:2017
159 MCSI 375 EN 63029:2017/AC:2018-02
160 MCSI 375 EN 63035:2017
161 MCSI 375 EN 63080:2017 Accessibility terms and definitions
162 MCSI 379 EN 14615:2017
163 MCSI 379 EN ISO 19160-4:2017
164 111 EN 13639:2017 Determination of total organic carbon in limestone
165 113 EN 12691:2018
166 113 EN 13467:2018
167 113 EN 16516:2017
168 115 EN 12440:2017 Natural stone - Denomination criteria
169 115 EN 14157:2017
170 136 HD 60364-1:2008/A11:2017
171 136 HD 60364-4-41:2007/A11:2017
172 136 HD 60364-4-41:2017/A11:2017
173 136 HD 60364-5-51:2009/A12:2017
Multimedia systems - Guide to the recommended characteristics of analogue interfaces to achieve interoperability
Universal serial bus interfaces for data and power - Part 1-3: Common components - USB Type-CTM Cable and Connector Specification
Wireless power transfer - Management - Part 2: Multiple device control management
Content management - Monitoring and management of personal digital content
Event video data recorder for road vehicle accidents - Part 1: Basic requirements
Wireless Power Transfer - AirFuel Resonant Baseline System Specification (BSS)
Audio, video and multimedia systems and equipment - Multimedia e-publishing and e-book technologies - Raster-graphics image-based e-books
Audio, video and multimedia systems and equipment - Multimedia e-publishing and e-book technologies - Raster-graphics image-based e-books
MIDI (Musical Instrument Digital Interface) specification 1.0 (Abridged edition, 2015)
Postal services - Digital postage marks - Applications, security and design
Addressing - Part 4: International postal address components and template language (ISO 19160-4:2017)
MDRAPFE
MDRAPFE
Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of resistance to impact
MDRAPFE
Thermal insulating products for building equipment and industrial installations - Determination of dimensions, squareness and linearity of preformed pipe insulation
MDRAPFE
Construction products: Assessment of release of dangerous substances - Determination of emissions into indoor air
MDRAPFE
MDRAPFE
Natural stone test methods - Determination of the abrasion resistance
MDRAPFE
Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions
MDRAPFE
Low-voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock
MDRAPFE
Low-voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock
MDRAPFE
Electrical installations of buildings - Part 5-51: Selection and erection of electrical equipment - Common rules
174 136 HD 60364-5-52:2011/A11:2017
175 136 HD 60364-5-53:2015/A11:2017
176 136 HD 60364-5-54:2011/A11:2017
177 136 HD 60364-5-559:2012/A11:2017
178 136 HD 60364-5-56:2010/A12:2017
179 136 HD 60364-7-701:2007/A12:2017
180 136 HD 60364-7-704:2007/A11:2017
181 136 HD 60364-7-705:2007/A12:2017
182 136 HD 60364-7-709:2009/A11:2017
183 136 HD 60364-7-715:2012/A11:2017
184 136 HD 60364-7-718:2013/A12:2017
185 136 HD 60364-7-729:2009/A11:2017
186 136 HD 60364-7-740:2006/A11:2017
187 136 HD 60364-7-708:2017
188 136 HD 60364-7-718:2013/A11:2017
189 186 EN 16933-2:2017
190 186 EN 16941-1:2018
191 187 EN 1436:2018
192 187 EN 1794-1:2018
193 187 EN 12675:2017
194 187 EN 12697-10:2017
MDRAPFE
Low-voltage electrical installations - Part 5-52: Selection and erection of electrical equipment - Wiring systems
MDRAPFE
Low-voltage electrical installations - Part 5-53: Selection and erection of electrical equipment - Switchgear and controlgear
MDRAPFE
Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors
MDRAPFE
Low-voltage electrical installations - Part 5-559: Selection and erection of electrical equipment - Luminaires and lighting installations
MDRAPFE
Low-voltage electrical installations - Part 5-56: Selection and erection of electrical equipment - Safety services
MDRAPFE
Low-voltage electrical installations - Part 7-701: Requirements for special installations or locations - Locations containing a bath or shower
MDRAPFE
Low-voltage electrical installations - Part 7-704: Requirements for special installations or locations - Construction and demolition site installations
MDRAPFE
Low-voltage electrical installations - Part 7-705: Requirements for special installations or locations - Agricultural and horticultural premises
MDRAPFE
Low-voltage electrical installations - Part 7-709: Requirements for special installations or locations - Marinas and similar locations
MDRAPFE
Low-voltage electrical installations - Part 7-715: Requirements for special installations or locations - Extra-low-voltage lighting installations
MDRAPFE
Low-voltage electrical installations - Part 7-718: Requirements for special installations or locations - Communal facilities and workplaces
MDRAPFE
Low-voltage electrical installations - Part 7-729: Requirements for special installations or locations - Operating or maintenance gangways
MDRAPFE
Electrical installations of buildings - Part 7-740: Requirements for special installations or locations - Temporary electrical installations for structures, amusement devices and booths at fairgrounds, amusement parks and circuses
MDRAPFE
Low-voltage electrical installations - Part 7-708: Requirements for special installations or locations - Caravan parks, camping parks and similar locations
MDRAPFE
Low-voltage electrical installations - Part 7-718: Requirements for special installations or locations - Communal facilities and workplaces
MDRAPFE
Drain and sewer systems outside buildings - Design - Part 2: Hydraulic design
MDRAPFE
On-site non-potable water systems - Part 1: Systems for the use of rainwater
MDRAPFE
Road marking materials - Road marking performance for road users and test methods
MDRAPFE
Road traffic noise reducing devices - Non-acoustic performance - Part 1: Mechanical performance and stability requirements
MDRAPFE
Traffic signal controllers - Functional safety requirements
MDRAPFE
Bituminous mixtures - Test methods - Part 10: Compactability
195 187 EN 12697-13:2017
196 187 EN 12697-23:2017
197 187 EN 13303:2017
198 187 EN 13398:2017
199 187 EN 13399:2017
200 187 EN 13588:2017
201 240 EN 13032-2:2017
202 276 EN ISO 3822-3:2018
203 276 EN ISO 10848-1:2017
204 276 EN ISO 10848-2:2017
205 276 EN ISO 10848-3:2017
206 276 EN ISO 10848-4:2017
207 276 EN ISO 12354-1:2017
208 276 EN ISO 12354-2:2017
209 276 EN ISO 12354-3:2017
210 276 EN ISO 12354-4:2017
MDRAPFE
Bituminous mixtures - Test methods - Part 13: Temperature measurement
MDRAPFE
Bituminous mixtures - Test methods - Part 23: Determination of the indirect tensile strength of bituminous specimens
MDRAPFE
Bitumen and bituminous binders - Determination of the loss in mass after heating of industrial bitumen
MDRAPFE
Bitumen and bituminous binders - Determination of the elastic recovery of modified bitumen
MDRAPFE
Bitumen and bituminous binders - Determination of storage stability of modified bitumen
MDRAPFE
Bitumen and bituminous binders - Determination of cohesion of bituminous binders with pendulum test
MDRAPFE
Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 2: Presentation of data for indoor and outdoor work places
MDRAPFE
Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for in-line valves and appliances (ISO 3822-3:2018)
MDRAPFE
Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 1: Frame document (ISO 10848-1:2017)
MDRAPFE
Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 2: Application to Type B elements when the junction has a small influence (ISO 10848-2:2017)
MDRAPFE
Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 3: Application to Type B elements when the junction has a substantial influence (ISO 10848-3:2017)
MDRAPFE
Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 4: Application to junctions with at least one Type A element (ISO 10848-4:2017)
MDRAPFE
Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 1: Airborne sound insulation between rooms (ISO 12354-1:2017)
MDRAPFE
Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 2: Impact sound insulation between rooms (ISO 12354-2:2017)
MDRAPFE
Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 3: Airborne sound insulation against outdoor sound (ISO 12354-3:2017)
MDRAPFE
Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 4: Transmission of indoor sound to the outside (ISO 12354-4:2017)
211 276 EN ISO 16283-1:2014/A1:2017
212 281 EN ISO 12569:2017
213 302 EN ISO 5801:2017
214 302 EN ISO 9806:2017
215 318 EN 12604:2017
216 318 EN 13126-8:2017
217 318 EN 16864:2017
218 321 EN 1504-10:2017
219 324 EN 14041:2018
220 335 EN ISO 8394-2:2017
221 335 EN 15643-5:2017
222 335 EN ISO 29481-1:2017
223 343 EN 1993-1-5:2006/A1:2017
224 343 EN 1993-1-6:2007/A1:2017
225 343 EN 1993-4-1:2007/A1:2017 Eurocode 3 - Design of steel structures - Part 4-1: Silos
226 343 EN 1993-4-2:2007/A1:2017
227 346 EN 62561-4:2017
228 346 EN 62561-5:2017
229 361 EN ISO 14688-1:2018
230 361 EN ISO 14688-2:2018
231 361 EN ISO 14689:2018
MDRAPFE
Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 1: Airborne sound insulation - Amendment 1 (ISO 16283-1:2014/Amd 1:2017)
MDRAPFE
Thermal performance of buildings and materials - Determination of specific airflow rate in buildings - Tracer gas dilution method (ISO 12569:2017)
MDRAPFE
Fans - Performance testing using standardized airways (ISO 5801:2017)
MDRAPFE
Solar energy - Solar thermal collectors - Test methods (ISO 9806:2017)
MDRAPFE
Industrial, commercial and garage doors and gates - Mechanical aspects - Requirements and test methods
MDRAPFE
Building hardware - Hardware for windows and door height windows - Part 8: Requirements and test methods for Tilt and Turn, Tilt-First and Turn-Only hardware
MDRAPFE
Building hardware - Mechatronic padlocks - Requirements and test methods
MDRAPFE
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works
MDRAPFE
Resilient, textile, laminate and modular multilayer floor coverings - Essential characteristics
MDRAPFE
Buildings and civil engineering works - Determination of extrudability for sealant - Part 2: Using standardized apparatus (ISO 8394-2:2017)
MDRAPFE
Sustainability of construction works - Sustainability assessment of buildings and civil engineering works - Part 5: Framework on specific principles and requirement for civil engineering works
MDRAPFE
Building information models - Information delivery manual - Part 1: Methodology and format (ISO 29481-1:2016)
MDRAPFE
Eurocode 3 - Design of steel structures - Part 1-5: Plated structural elements
MDRAPFE
Eurocode 3 - Design of steel structures - Part 1-6: Strength and Stability of Shell Structures
MDRAPFE
MDRAPFE
Eurocode 3 - Design of steel structures - Part 4-2: Tanks
MDRAPFE
Lightning protection system components (LPSC) - Part 4: Requirements for conductor fasteners
MDRAPFE
Lightning protection system components (LPSC) - Part 5: Requirements for earth electrode inspection housings and earth electrode seals
MDRAPFE
Geotechnical investigation and testing - Identification and classification of soil - Part 1: Identification and description (ISO 14688-1:2017)
MDRAPFE
Geotechnical investigation and testing - Identification and classification of soil - Part 2: Principles for a classification (ISO 14688-2:2017)
MDRAPFE
Geotechnical investigation and testing - Identification, description and classification of rock (ISO 14689:2017)
232 361 EN ISO 17892-7:2018
233 361 EN ISO 18674-3:2017
234 361 EN ISO 22476-10:2017
235 ME 2 EN 60445:2017
236 ME 2 EN 61360-1:2017
237 ME 2 EN 62569-1:2017
238 ME 2 EN 62656-5:2017
239 ME 3 EN 50588-1:2017
240 ME 3 EN 50629:2015/A2:2018
241 ME 5 EN 60674-2:2017/AC:2018-01
242 ME 5 EN IEC 60893-3-6:2004/A2:2018
243 ME 5 EN IEC 62677-1:2018
244 ME 5 EN IEC 62677-2:2018
245 ME 8 EN 62271-1:2017
246 ME 8 EN 62271-100:2009/A2:2017
247 ME 8 EN IEC 62271-110:2018
248 ME 8 EN 62689-2:2017
249 ME 9 EN 60947-2:2017
250 ME 9 EN 60947-5-1:2017
251 ME 9 EN 62683-1:2017
252 ME 11 EN 60669-1:2018
253 ME 11 EN 61242:1997/A13:2017
254 ME 11 EN 62606:2013/A1:2017 General requirements for arc fault detection devices
MDRAPFE
Geotechnical investigation and testing - Laboratory testing of soil - Part 7: Unconfined compression test (ISO 17892-7:2017)
MDRAPFE
Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 3: Measurement of displacements across a line: Inclinometers (ISO 18674-3:2017)
MDRAPFE
Geotechnical investigation and testing - Field testing - Part 10: Weight sounding test (ISO 22476-10:2017)
Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors
Standard data element types with associated classification scheme - Part 1: Definitions - Principles and methods
Generic specification of information on products by properties - Part 1: Principles and method
Standardized product ontology register and transfer by spreadsheets - Part 5: Interface for activity description
Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36 kV - Part 1: General requirements
Energy performance of large power transformers (Um > 36 kV or Sr ? 40 MVA)
Specification for plastic films for electrical purposes - Part 2: Methods of test
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
Heat shrinkable low and medium voltage moulded shapes - Part 1: General requirements
Heat shrinkable low and medium voltage moulded shapes - Part 2 Methods of test
High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear
High-voltage switchgear and controlgear - Part 100: Alternating-current circuit-breakers
High-voltage switchgear and controlgear - Part 110: Inductive load switching
Current and voltage sensors or detectors, to be used for fault passage indication purposes - Part 2: System aspects
Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices
Low-voltage switchgear and controlgear - Product data and properties for information exchange - Part 1: Catalogue data
Switches for household and similar fixed electrical installations - Part 1: General requirements
Electrical accessories - Cable reels for household and similar purposes
255 ME 15 EN 50180-3:2015/A1:2017
256 ME 15 EN 60137:2017
257 ME 16 EN ISO 15382:2017
258 ME 16 EN ISO 15651:2017
259 ME 16 EN ISO 16424:2017
260 ME 16 EN ISO 16638-1:2017
261 ME 16 EN ISO 17099:2017
262 ME 16 EN ISO 18589-2:2017
263 ME 16 EN ISO 18589-3:2017
264 ME 16 EN ISO 19017:2017
265 ME 16 EN ISO 19238:2017
266 ME 16 EN ISO 20553:2017
267 ME 16 EN ISO 20785-1:2017
268 ME 16 EN ISO 20785-2:2017
269 ME 16 EN ISO 20785-3:2017
270 ME 16 EN ISO 21483:2017
271 ME 16 EN ISO 21613:2017
272 ME 16 EN ISO 29661:2017
Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 3: Requirements for bushing fixations
Insulated bushings for alternating voltages above 1 000 V
Radiological protection - Procedures for monitoring the dose to the lens of the eye, the skin and the extremities (ISO 15382:2015)
Nuclear energy - Determination of total hydrogen content in PuO2 and UO2 powders and UO2, (U,Gd)O2 and (U,Pu)O2 sintered pellets - Inert gas extraction and conductivity detection method (ISO 15651:2015)
Nuclear energy - Evaluation of homogeneity of Gd distribution within gadolinium fuel blends and determination of Gd2O3 content in gadolinium fuel pellets by measurements of uranium and gadolinium elements (ISO 16424:2012)
Radiological protection - Monitoring and internal dosimetry for specific materials - Part 1: Inhalation of uranium compounds (ISO 16638-1:2015)
Radiological protection - Performance criteria for laboratories using the cytokinesis block micronucleus (CBMN) assay in peripheral blood lymphocytes for biological dosimetry (ISO 17099:2014)
Measurement of radioactivity in the environment - Soil - Part 2: Guidance for the selection of the sampling strategy, sampling and pre-treatment of samples (ISO 18589-2:2015)
Measurement of radioactivity in the environment - Soil - Part 3: Test method of gamma-emitting radionuclides using gamma-ray spectrometry (ISO 18589-3:2015, Corrected version 2015-12-01)
Guidance for gamma spectrometry measurement of radioactive waste (ISO 19017:2015)
Radiological protection - Performance criteria for service laboratories performing biological dosimetry by cytogenetics (ISO 19238:2014)
Radiation protection - Monitoring of workers occupationally exposed to a risk of internal contamination with radioactive material (ISO 20553:2006)
Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 1: Conceptual basis for measurements (ISO 20785-1:2012)
Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 2: Characterization of instrument response (ISO 20785-2:2011)
Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 3: Measurements at aviation altitudes (ISO 20785-3:2015)
Determination of solubility in nitric acid of plutonium in unirradiated mixed oxide fuel pellets (U, Pu) O2 (ISO 21483:2013)
(U, Pu)O2 Powders and sintered pellets - Determination of chlorine and fluorine (ISO 21613:2015)
Reference radiation fields for radiation protection - Definitions and fundamental concepts (ISO 29661:2012, including Amd 1:2015)
273 ME 16 EN 60780-323:2017
274 ME 16 EN 61577-2:2017
275 ME 16 EN 62765-1:2017
276 ME 17 EN 60747-16-3:2002/A2:2017
277 ME 17 EN 60747-16-4:2004/A2:2017
278 ME 17 EN 60749-43:2017
279 ME 17 EN 60749-5:2017
280 ME 17 EN IEC 62969-1:2018
281 ME 18 EN 60679-1:2017
282 ME 18 EN 62884-1:2017
283 ME 18 EN 62884-2:2017
284 ME 19 EN 50625-2-3:2017
285 ME 19 EN 50625-2-4:2017
286 ME 19 EN IEC 60068-2-52:2018
287 ME 19 EN 62321-4:2014/A1:2017
288 ME 21 EN 60317-0-7:2017
289 ME 21 EN 60317-56:2017
290 ME 21 EN 60317-0-10:2017
Nuclear facilities - Electrical equipment important to safety - Qualification
Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 2: Specific requirements for 222Rn and 220Rn measuring instruments
Nuclear powers plants - Instrumentation and control important to safety - Management of ageing of sensors and transmitters - Part 1: Pressure transmitters
Semiconductor devices - Part 16-3: Microwave integrated circuits - Frequency converters
Semiconductor devices - Part 16-4: Microwave integrated circuits - Switches
Semiconductor devices - Mechanical and climatic test methods - Part 43: Guidelines for IC reliability qualification plans
Semiconductor devices - Mechanical and climatic test methods - Part 5: Steady-state temperature humidity bias life test
Semiconductor devices - Semiconductor interface for automotive vehicles - Part 1: General requirements of power interface for automotive vehicle sensors
Piezoelectric, dielectric and electrostatic oscillators of assessed quality - Part 1: Generic specification
Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 1: Basic methods for the measurement
Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 2: Phase jitter measurement method
Collection, logistics & treatment requirements for WEEE - Part 2-3: Treatment requirements for temperature exchange equipment and other WEEE containing VFC and/or VHC
Collection, logistics & treatment requirements for WEEE - Part 2-4: Treatment requirements for photovoltaic panels
Environmental testing - Part 2: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution)
Determination of certain substances in electrotechnical products - Part 4: Mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS
Specifications for particular types of winding wires - Part 0-7: General requirements - Fully insulated (FIW) zero-defect enamelled round copper wire
Specifications for particular types of winding wires - Part 56: Solderable fully insulated (FIW) zero-defect polyurethane enamelled round copper wire, class 180
Specifications for particular types of winding wires - Part 0-10: General requirements - Polyester glass-fibre wound fused, unvarnished, or resin or varnish impregnated, bare or enamelled round copper wire
291 ME 21 EN 60317-70:2017
292 ME 21 EN 60317-71:2017
293 ME 21 EN 60317-72:2017
294 ME 23 EN 61326-3-1:2017
295 ME 23 EN 61511-1:2017/A1:2017
296 ME 23 EN 61784-3:2016/A1:2017
297 ME 23 EN 61784-3-13:2017
298 ME 23 EN 61784-3-17:2017
299 ME 23 EN 61784-3-2:2017
300 ME 23 EN 61784-3-3:2017
301 ME 23 EN 61784-3-8:2017
302 ME 23 EN 61987-24-2:2017
303 ME 23 EN 61987-24-3:2017
304 ME 23 EN 62439-1:2010/A2:2017
305 ME 23 EN 62439-2:2017
Specifications for particular types of winding wires - Part 70: Polyester glass-fibre wound fused, unvarnished or resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155
Specifications for particular types of winding wires - Part 71: Polyester glass-fibre wound fused and resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180
Specifications for particular types of winding wires - Part 72: Polyester glass-fibre wound fused, silicone resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - General industrial applications
Functional safety - Safety instrumented systems for the process industry sector - Normative (uon) - Part 1: Framework, definitions, system, hardware and software requirements
Industrial communication networks - Profiles - Part 3: Functional safety fieldbuses - General rules and profile definitions
Industrial communication networks - Profiles - Part 3-13: Functional safety fieldbuses - Additional specifications for CPF 13
Industrial communication networks - Profiles - Part 3-17: Functional safety fieldbuses - Additional specifications for CPF 17
Industrial communication networks - Profiles - Part 3-2: Functional safety fieldbuses - Additional specifications for CPF 2
Industrial communication networks - Profiles - Part 3-3: Functional safety fieldbuses - Additional specifications for CPF 3
Industrial communication networks - Profiles - Part 3-8: Functional safety fieldbuses - Additional specifications for CPF 8
Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-2: List of properties (LOPs) of valve/actuator accessories for electronic data exchange
Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-3: Lists of properties (LOPs) of flow modification accessories for electronic data exchange
Industrial communication networks - High availability automation networks - Part 1: General concepts and calculation methods
Industrial communication networks - High availability automation networks - Part 2: Media Redundancy Protocol (MRP)
306 ME 23 EN IEC 62439-3:2018
307 ME 23 EN IEC 62439-5:2018
308 ME 23 EN 62453-301:2009/A1:2017
309 ME 23 EN 62453-302:2017
310 ME 23 EN 62453-303-2:2009/A1:2017
311 ME 23 EN 62453-309:2017
312 ME 23 EN 62453-315:2009/A1:2017
313 ME 23 EN IEC 62453-303-1:2009/A1:2018
314 ME 23 EN 62657-1:2017
315 ME 23 EN 62657-2:2017
316 ME 23 EN IEC 62828-1:2018
317 ME 23 EN IEC 62828-2:2018
318 ME 23 EN 62948:2017
319 ME 23 EN 62952-3:2017
320 ME 26 EN IEC 60118-4:2015/A1:2018
321 ME 26 EN 60645-1:2017
322 ME 26 EN 61252:1995/A2:2017
323 ME 26 EN 61260-2:2016/A1:2017
324 ME 26 EN 61391-1:2006/A1:2017
325 ME 26 EN 61672-2:2013/A1:2017
Industrial communication networks - High availability automation networks - Part 3: Parallel Redundancy Protocol (PRP) and High-availability Seamless Redundancy (HSR)
Industrial communication networks - High availability automation networks - Part 5: Beacon Redundancy Protocol (BRP)
Field device tool (FDT) interface specification - Part 301: Communication profile integration - IEC 61784 CPF 1
Field device tool (FDT) interface specification - Part 302: Communication profile integration - IEC 61784 CPF 2
Field device tool (FDT) interface specification - Part 303-2: Communication profile integration - IEC 61784 CP 3/4, CP 3/5 and CP3/6
Field device tool (FDT) interface specification - Part 309: Communication profile integration - IEC 61784 CPF 9
Field device tool (FDT) interface specification - Part 315: Communication profile integration - IEC 61784 CPF 15
Field device tool (FDT) interface specification - Part 303-1: Communication profile integration - IEC 61784 CP 3/1 and CP 3/2
Industrial communication networks - Wireless communication networks - Part 1: Wireless communication requirements and spectrum considerations
Industrial communication networks - Wireless communication networks - Part 2: Coexistence management
Reference conditions and procedures for testing industrial and process measurement transmitters - Part 1: General procedures for all types of transmitters
Reference conditions and procedures for testing industrial and process measurement transmitters - Part 2: Specific procedures for pressure transmitters
Industrial networks - Wireless communication network and communication profiles - WIA-FA
Power sources for a wireless communication device - Part 3: Generic energy harvesting adaptor module
Electroacoustics - Hearing aids - Part 4: Induction-loop systems for hearing aid purposes - System performance requirements
Electroacoustics - Audiometric equipment - Part 1: Equipment for pure-tone and speech audiometry
Electroacoustics - Specifications for personal sound exposure meters
Electroacoustics - Octave-band and fractional-octave-band filters - Part 2: Pattern-evaluation tests
Ultrasonics - Pulse-echo scanners - Part 1: Techniques for calibrating spatial measurement systems and measurement of system point-spread function response
Electroacoustics - Sound level meters - Part 2: Pattern evaluation tests
326 ME 26 EN 62359:2011/A1:2018
327 ME 26 EN 62489-1:2010/A2:2018
328 ME 27 EN 50131-2-2:2017
329 ME 27 EN 50131-6:2017
330 ME 27 EN 50134-2:2017
331 ME 27 EN 50398-1:2017
332 ME 27 EN 62820-1-2:2017
333 ME 27 EN IEC 62820-2:2018
334 ME 30 EN 55016-1-2:2014/A1:2018
335 ME 30 EN 55016-2-1:2014/A1:2017
336 ME 30 EN 61000-2-2:2002/A1:2017
337 ME 30 EN 61000-4-12:2017
338 ME 30 EN 61000-4-5:2014/A1:2017
339 ME 30 EN 61000-4-11:2004/A1:2017
340 ME 31 EN IEC 60519-12:2018
341 ME 33 EN 60695-11-2:2017
342 ME 34 EN 61788-22-1:2017
343 ME 35 EN 50380:2017
344 ME 35 EN 60904-1-1:2017
Ultrasonics - Field characterization - Test methods for the determination of thermal and mechanical indices related to medical diagnostic ultrasonic fields
Electroacoustics - Audio-frequency induction loop systems for assisted hearing - Part 1: Methods of measuring and specifying the performance of system components
Alarm systems - Intrusion and hold-up systems - Part 2-2: Intrusion detectors - Passive infrared detectors
Alarm systems - Intrusion and hold-up systems - Part 6: Power supplies
Alarm systems - Social alarm systems - Part 2: Trigger devices
Alarm systems - Combined and integrated alarm systems - Part 1: General requirements
Building intercom system - Part 1-2: System requirements - Building intercom systems using the internet protocol (IP)
Building intercom systems - Part 2: Requirements for advanced security building intercom systems (ASBIS)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Coupling devices for conducted disturbance measurements
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements
Electromagnetic compatibility (EMC) - Part 2-2: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems
Electromagnetic compatibility (EMC) - Part 4-12: Testing and measurement techniques - Ring wave immunity test
Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
Safety in installations for electroheating and electromagnetic processing - Part 12: Particular requirements for infrared electroheating
Fire hazard testing - Part 11-2: Test flames - 1 kW nominal pre-mixed flame - Apparatus, confirmatory test arrangement and guidance
Superconductivity - Part 22-1: Superconducting electronic devices - Generic specification for sensors and detectors
Marking and documentation requirements for Photovoltaic Modules
Photovoltaic devices - Part 1-1: Measurement of current-voltage characteristics of multi-junction photovoltaic (PV) devices
345 ME 35 EN 60904-8-1:2017
346 ME 35 EN 61400-25-1:2017
347 ME 35 EN 61400-25-5:2017
348 ME 35 EN IEC 62688:2018
349 ME 35 EN 62805-1:2017
350 ME 35 EN 62805-2:2017
351 ME 35 EN 62817:2015/A1:2017
352 ME 35 EN 62920:2017
353 ME 35 EN 62979:2017
354 ME 36 EN 61954:2011/A2:2017
355 ME 36 EN 62501:2009/A2:2017
356 ME 36 EN IEC 62909-1:2018
357 ME 36 EN 62927:2017
358 ME 36 EN 62927:2017/AC:2018-01
359 ME 39 EN ISO 2063-1:2017
360 ME 39 EN ISO 2063-2:2017
361 ME 39 EN ISO 5175-1:2017
362 ME 39 EN ISO 5175-2:2017
363 ME 39 EN ISO 9017:2018
364 ME 39 EN ISO 9455-11:2017
Photovoltaic devices - Part 8-1: Measurement of spectral responsivity of multi-junction photovoltaic (PV) devices
Wind energy generation systems - Part 25-1: Communications for monitoring and control of wind power plants - Overall description of principles and models
Wind energy generation systems - Part 25-5: Communications for monitoring and control of wind power plants - Compliance testing
Concentrator photovoltaic (CPV) modules and assemblies - Safety qualification
Method for measuring photovoltaic (PV) glass - Part 1: Measurement of total haze and spectral distribution of haze
Method for measuring photovoltaic (PV) glass - Part 2: Measurement of transmittance and reflectance
Photovoltaic systems - Design qualification of solar trackers
Photovoltaic power generating systems - EMC requirements and test methods for power conversion equipment
Photovoltaic module - Bypass diode - Thermal runaway test
Static VAR compensators (SVC) - Testing of thyristor valves
Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing
Bi-directional grid-connected power converters - Part 1: General requirements
Voltage sourced converter (VSC) valves for static synchronous compensator (STATCOM) - Electrical Testing
Voltage sourced converter (VSC) valves for static synchronous compensator (STATCOM) - Electrical Testing
Thermal spraying - Zinc, aluminium and their alloys - Part 1: Design considerations and quality requirements for corrosion protection systems (ISO 2063-1:2017)
Thermal spraying - Zinc, aluminium and their alloys - Part 2: Execution of corrosion protection systems (ISO 2063-2:2017)
Gas welding equipment - Safety devices - Part 1: Devices incorporating a flame (flashback) arrestor (ISO 5175-1:2017)
Gas welding equipment - Safety devices - Part 2: Devices not incorporating a flame (flashback) arrestor (ISO 5175-2:2017)
Destructive tests on welds in metallic materials - Fracture test (ISO 9017:2017)
Soft soldering fluxes - Test methods - Part 11: Solubility of flux residues (ISO 9455-11:2017)
365 ME 39 EN ISO 9455-13:2017
366 ME 39 EN ISO 9455-14:2017
367 ME 39 EN ISO 9455-15:2017
368 ME 39 EN ISO 10675-2:2017
369 ME 39 EN ISO 11666:2018
370 ME 39 EN ISO 13916:2017
371 ME 39 EN ISO 13918:2018
372 ME 39 EN ISO 14114:2018
373 ME 39 EN ISO 15011-4:2018
374 ME 39 EN ISO 15296:2018 Gas welding equipment - Vocabulary (ISO 15296:2017)
375 ME 39 EN ISO 15653:2018
376 ME 39 EN ISO 17633:2018
377 ME 39 EN ISO 17640:2017
378 ME 39 EN ISO 17836:2017
379 ME 39 EN ISO 18278-3:2017
380 ME 39 EN ISO 22825:2017
381 ME 39 EN ISO 22829:2017
382 ME 39 EN ISO 26304:2018
383 ME 40 EN ISO 16371-2:2017
384 ME 40 EN ISO 18563-2:2017
385 ME 40 EN ISO 20485:2018
Soft soldering fluxes - Test methods - Part 13: Determination of flux spattering (ISO 9455-13:2017)
Soft soldering fluxes - Test methods - Part 14: Assessment of tackiness of flux residues (ISO 9455-14:2017)
Soft soldering fluxes - Test methods - Part 15: Copper corrosion test (ISO 9455-15:2017)
Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 2: Aluminium and its alloys (ISO 10675-2:2017)
Non-destructive testing of welds - Ultrasonic testing - Acceptance levels (ISO 11666:2018)
Welding - Measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:2017)
Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:2017)
Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - General requirements (ISO 14114:2017)
Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 4: Fume data sheets (ISO 15011-4:2017)
Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2018)
Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels - Classification (ISO 17633:2017)
Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640:2017)
Thermal spraying - Determination of the deposition efficiency for thermal spraying (ISO 17836:2017)
Resistance welding - Weldability - Part 3: Evaluation procedures for weldability in spot weld bonding (ISO 18278-3:2017)
Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys (ISO 22825:2017)
Resistance welding equipment - Transformers - Integrated transformer-rectifier units for welding guns operating at 1 000 Hz (ISO 22829:2017)
Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels - Classification (ISO 26304:2017)
Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 2: General principles for testing of metallic materials using X-rays and gamma rays (ISO 16371-2:2017)
Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 2: Probes (ISO 18563-2:2017)
Non-destructive testing - Leak testing - Tracer gas method (ISO 20485:2017)
386 ME 40 EN ISO 20486:2018
387 ME 42 EN ISO 3887:2018
388 ME 42 EN ISO 4545-4:2018
389 ME 46 EN ISO 3927:2017
390 ME 46 EN ISO 4492:2017
391 ME 46 EN ISO 4496:2017
392 ME 46 EN ISO 5754:2017
393 ME 47 EN ISO 945-1:2018
394 ME 47 EN 12438:2017
395 ME 47 EN 12681-1:2017
396 ME 47 EN 12681-2:2017
397 ME 55 EN ISO 6412-1:2018
398 ME 55 EN ISO 6412-2:2018
399 ME 55 EN ISO 6412-3:2018
400 ME 55 EN ISO 13567-1:2017
401 ME 55 EN ISO 13567-2:2017
402 ME 56 EN ISO 15378:2017
403 ME 58 EN ISO 14253-1:2017
404 ME 58 EN ISO 17450-4:2018
405 ME 58 EN ISO 25178-71:2017
406 ME 59 EN ISO 16228:2018
Non-destructive testing - Leak testing - Calibration of reference leaks for gases (ISO 20486:2017)
Steels - Determination of the depth of decarburization (ISO 3887:2017)
Metallic materials - Knoop hardness test - Part 4: Table of hardness values (ISO 4545-4:2017)
Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression (ISO 3927:2017)
Metallic powders, excluding powders for hardmetals - Determination of dimensional changes associated with compacting and sintering (ISO 4492:2017)
Metallic powders - Determination of acid-insoluble content in iron, copper, tin and bronze powders (ISO 4496:2017)
Sintered metal materials, excluding hardmetals - Unnotched impact test piece (ISO 5754:2017)
Microstructure of cast irons - Part 1: Graphite classification by visual analysis (ISO 945-1:2017)
Magnesium and magnesium alloys - Magnesium alloys for cast anodes
Founding - Radiographic testing - Part 1: Film techniques
Founding - Radiographic testing - Part 2: Techniques with digital detectors
Technical product documentation - Simplified representation of pipelines - Part 1: General rules and orthogonal representation (ISO 6412-1:2017)
Technical product documentation - Simplified representation of pipelines - Part 2: Isometric projection (ISO 6412-2:2017)
Technical product documentation - Simplified representation of pipelines - Part 3: Terminal features of ventilation and drainage systems (ISO 6412-3:2017)
Technical product documentation - Organization and naming of layers for CAD - Part 1: Overview and principles (ISO 13567-1:2017)
Technical product documentation - Organization and naming of layers for CAD - Part 2: Concepts, format and codes used in construction documentation (ISO 13567-2:2017)
Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP) (ISO 15378:2017)
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017)
Geometrical product specifications (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying GPS deviations (ISO 17450-4:2017)
Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards (ISO 25178-1:2017)
Fasteners - Types of inspection documents (ISO 16228:2017)
407 ME 66 EN 748:2013+A1:2018
408 ME 66 EN 1069-1:2017
409 ME 66 EN 1069-2:2017 Water slides - Part 2: Instructions
410 ME 66 EN 1176-1:2017
411 ME 66 EN 1176-2:2017
412 ME 66 EN 1176-3:2017
413 ME 66 EN 1176-4:2017
414 ME 66 EN 1176-6:2017
415 ME 66 EN 1177:2018
416 ME 66 EN 1651:2018
417 ME 66 EN 16579:2018
418 ME 66 EN 16869:2017 Design/construction of Via Ferratas
419 ME 66 EN 16869:2017/AC:2018 Design/construction of Via Ferratas
420 ME 66 EN ISO 20380:2017
421 ME 66 EN ISO 20957-10:2017
422 ME 66 EN ISO 20957-8:2017
423 ME 66 EN ISO 23537-1:2016/A1:2018
424 ME 66 EN ISO 25649-1:2017
425 ME 66 EN ISO 25649-2:2017
Playing field equipment - Football goals - Functional and safety requirements, test methods
Water slides - Part 1: Safety requirements and test methods
Playground equipment and surfacing - Part 1: General safety requirements and test methods
Playground equipment and surfacing - Part 2: Additional specific safety requirements and test methods for swings
Playground equipment and surfacing - Part 3: Additional specific safety requirements and test methods for slides
Playground equipment and surfacing - Part 4: Additional specific safety requirements and test methods for cableways
Playground equipment and surfacing - Part 6: Additional specific safety requirements and test methods for rocking equipment
Impact attenuating playground surfacing - Methods of test for determination of impact attenuation
Paragliding equipment - Harnesses - Safety requirements and strength tests
Playing field equipment - Portable and permanent socketed goals - Functional, safety requirements and test methods
Public swimming pools - Computer vision systems for the detection of drowning accidents in swimming pools - Safety requirements and test methods (ISO 20380:2017)
Stationary training equipment - Part 10: Exercise bicycles with a fixed wheel or without freewheel - Additional specific safety requirements and test methods (ISO 20957-10:2017)
Stationary training equipment - Part 8: Steppers, stairclimbers and climbers - Additional specific safety requirements and test methods (ISO 20957-8:2017)
Requirements for sleeping bags - Part 1: Thermal and dimensional requirements - Amendment 1 (ISO 23537-1:2016/Amd 1:2018)
Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods (ISO 25649-1:2017)
Floating leisure articles for use on and in the water - Part 2: Consumer information (ISO 25649-2:2017)
426 ME 66 EN ISO 25649-3:2017
427 ME 66 EN ISO 25649-4:2017
428 ME 66 EN ISO 25649-5:2017
429 ME 66 EN ISO 25649-6:2017
430 ME 66 EN ISO 25649-7:2017
431 ME 77 EN 16944:2017
432 ME 78 EN 1646-1:2018
433 ME 78 EN 1648-1:2018
434 ME 78 EN 1648-2:2018
435 ME 78 EN ISO 14469:2017
436 ME 78 EN 15194:2017
437 ME 78 EN ISO 18541-6:2018
438 ME 85 EN 1907:2017
439 ME 88 EN 131-3:2018 Ladders - Part 3: Marking and user instructions
440 ME 89 EN 593:2017
441 ME 89 EN 736-1:2018
442 ME 89 EN 12627:2017 Industrial valves - Butt welding ends for steel valves
443 ME 102 EN ISO 17231:2017
444 ME 102 EN ISO 20536:2017
445 ME 102 EN ISO 20701:2018
446 ME 103 EN ISO 105-B03:2017
Floating leisure articles for use on and in the water - Part 3: Additional specific safety requirements and test methods for Class A devices (ISO 25649-3:2017)
Floating leisure articles for use on and in the water - Part 4: Additional specific safety requirements and test methods for Class B devices (ISO 25649-4:2017)
Floating leisure articles for use on and in the water - Part 5: Additional specific safety requirements and test methods for Class C devices (ISO 25649-5:2017)
Floating leisure articles for use on and in the water - Part 6: Additional specific safety requirements and test methods for Class D devices (ISO 25649-6:2017)
Floating leisure articles for use on and in the water - Part 7: Additional specific safety requirements and test methods for class E devices (ISO 25649-7:2017)
Agricultural machinery and tractors - Standardized access to repair and maintenance information (RMI) - Requirements
Leisure accommodation vehicles - Motor caravans - Part 1: Habitation requirements relating to health and safety
Leisure accommodation vehicles - 12 V direct current extra low voltage electrical installations - Part 1: Caravans
Leisure accommodation vehicles - 12 V direct current extra low voltage electrical installations - Part 2: Motor caravans
Road vehicles - Compressed natural gas (CNG) refuelling connector (ISO 14469:2017)
Cycles - Electrically power assisted cycles - EPAC Bicycles
Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 6: L-Category vehicle specific RMI use cases and requirements (ISO 18541-6:2018)
Safety requirements for cableway installations designed to carry persons - Terminology
Industrial valves - Metallic butterfly valves for general purposes
Valves - Terminology - Part 1: Definition of types of valves
Leather - Physical and mechanical tests - Determination of water repellency of garment leather (ISO 17231:2017)
Footwear - Critical substances potentially present in footwear and footwear components - Determination of phenol in footwear materials (ISO 20536:2017)
Leather - Tests for colour fastness - Colour fastness to saliva (ISO 20701:2017)
Textiles - Tests for colour fastness - Part B03: Colour fastness to weathering: Outdoor exposure (ISO 105-B03:2017)
447 ME 103 EN ISO 1107:2017
448 ME 103 EN ISO 1833-11:2017
449 ME 103 EN ISO 1833-4:2017
450 ME 103 EN ISO 1833-7:2017
451 ME 103 EN ISO 2411:2017
452 ME 103 EN ISO 3175-1:2018
453 ME 103 EN ISO 3175-2:2018
454 ME 103 EN ISO 3175-3:2018
455 ME 103 EN ISO 6179:2017
456 ME 103 EN ISO 12138:2018
457 ME 103 EN 13402-3:2017
458 ME 103 EN ISO 15797:2018
459 ME 105 EN 13368-3:2017
460 ME 105 EN 14069:2017
461 ME 105 EN 16962:2018
462 ME 105 EN 16963:2018
463 ME 105 EN 16964:2018
464 ME 105 EN 16965:2018
465 ME 106 EN ISO 14644-15:2017
Fishing nets - Netting - Basic terms and definitions (ISO 1107:2017)
Textiles - Quantitative chemical analysis - Part 11: Mixtures of certain cellulose fibres with certain other fibres (method using sulfuric acid) (ISO 1833-11:2017)
Textiles - Quantitative chemical analysis - Part 4: Mixtures of certain protein fibres with certain other fibres (method using hypochlorite) (ISO 1833-4:2017)
Textiles - Quantitative chemical analysis - Part 7: Mixtures of polyamide with certain other fibres (method using formic acid) (ISO 1833-7:2017)
Rubber- or plastics-coated fabrics - Determination of coating adhesion (ISO 2411:2017)
Textiles - Professional care, drycleaning and wetcleaning of fabrics and garments - Part 1: Assessment of performance after cleaning and finishing (ISO 3175-1:2017)
Textiles - Professional care, drycleaning and wetcleaning of fabrics and garments - Part 2: Procedure for testing performance when cleaning and finishing using tetrachloroethene (ISO 3175-2:2017)
Textiles - Professional care, drycleaning and wetcleaning of fabrics and garments - Part 3: Procedure for testing performance when cleaning and finishing using hydrocarbon solvents (ISO 3175-3:2017)
Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique) (ISO 6179:2017)
Textiles - Domestic laundering procedures for textile fabrics prior to flammability testing (ISO 12138:2017)
Size designation of clothes - Part 3: Size labelling based on body measurements and intervals
Textiles - Industrial washing and finishing procedures for testing of workwear (ISO 15797:2017)
Fertilizers - Determination of chelating agents in fertilizers by chromatography - Part 3: Determination of [S,S]-EDDS by ion pair chromatography
Liming materials - Denominations, specifications and labelling
Fertilizers - Extraction of water soluble micro-nutrients in fertilizers and removal of organic compounds from fertilizer extracts
Fertilizers - Determination of boron, cobalt, copper, iron, manganese, molybdenum and zinc using ICP-AES
Fertilizers - Extraction of total micro-nutrients in fertilizers using aqua regia
Fertilizers - Determination of cobalt, copper, iron, manganese and zinc using flame atomic absorption spectrometry (FAAS)
Cleanrooms and associated controlled environments - Part 15: Assessment of suitability for use of equipment and materials by airborne chemical concentration (ISO 14644-15:2017)
466 ME 106 EN ISO 14644-13:2017
467 ME 108 EN ISO 294-5:2017
468 ME 108 EN 438-9:2017
469 ME 108 EN 477:2018
470 ME 108 EN 478:2018
471 ME 108 EN 479:2018
472 ME 108 EN 514:2018
473 ME 108 EN ISO 899-1:2017
474 ME 108 EN 1451-1:2017
475 ME 108 EN ISO 1825:2017
476 ME 108 EN 1852-1:2018
477 ME 108 EN ISO 2507-1:2017
478 ME 108 EN ISO 2507-2:2017
479 ME 108 EN ISO 2507-3:2017
480 ME 108 EN ISO 3127:2017
481 ME 108 EN ISO 8028:2018
482 ME 108 EN ISO 9852:2017
Cleanrooms and associated controlled environments - Part 13: Cleaning of surfaces to achieve defined levels of cleanliness in terms of particle and chemical classifications (ISO 14644-13:2017)
Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy (ISO 294-5:2017)
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 9: Classification and specifications for alternative core laminates
Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the resistance to impact of profiles by falling mass
Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the appearance after exposure at 150 °C
Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of heat reversion
Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the strength of welded corners and T-joints
Plastics - Determination of creep behaviour - Part 1: Tensile creep (ISO 899-1:2017)
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system
Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling - Specification (ISO 1825:2017)
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system
Thermoplastics pipes and fittings - Vicat softening temperature - Part 1: General test method (ISO 2507-1:1995)
Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes (ISO 2507-2:1995)
Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings (ISO 2507-3:1995)
Thermoplastics pipes - Determination of resistance to external blows - Round-the-clock method (ISO 3127:1994)
Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification (ISO 8028:2017)
Unplasticized poly(vinyl chloride) (PVC-U) pipes - Dichloromethane resistance at specified temperature (DCMT) - Test method (ISO 9852:2007)
483 ME 108 EN ISO 10210:2017
484 ME 108 EN ISO 10350-1:2017
485 ME 108 EN ISO 10619-1:2018
486 ME 108 EN ISO 10619-2:2018
487 ME 108 EN ISO 10960:2018
488 ME 108 EN ISO 11173:2017
489 ME 108 EN ISO 11295:2017
490 ME 108 EN ISO 11296-2:2018
491 ME 108 EN ISO 11296-4:2018
492 ME 108 EN ISO 11297-2:2018
493 ME 108 EN ISO 11297-4:2018
494 ME 108 EN ISO 11298-2:2018
495 ME 108 EN 13207:2018
496 ME 108 EN ISO 13254:2017
497 ME 108 EN ISO 13255:2017
498 ME 108 EN ISO 13257:2017
499 ME 108 EN ISO 13260:2011/A1:2017
Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials (ISO 10210:2012)
Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials (ISO 10350-1:2017)
Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature (ISO 10619-1:2017)
Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2017)
Rubber and plastics hoses - Assessment of ozone resistance under dynamic conditions (ISO 10960:2017)
Thermoplastics pipes - Determination of resistance to external blows - Staircase method (ISO 11173:1994)
Classification and information on design and applications of plastics piping systems used for renovation and replacement (ISO 11295:2017)
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 2: Lining with continuous pipes (ISO 11296-2:2018)
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes (ISO 11296-4:2018)
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 2: Lining with continuous pipes (ISO 11297-2:2018)
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 4: Lining with cured-in-place pipes (ISO 11297-4:2018)
Plastics piping systems for renovation of underground water supply networks - Part 2: Lining with continuous pipes (ISO 11298-2:2018)
Plastics - Thermoplastic silage films and tubes for use in agriculture
Thermoplastics piping systems for non-pressure applications - Test method for watertightness (ISO 13254:2010)
Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for airtightness of joints (ISO 13255:2010)
Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling (ISO 13257:2010)
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading - Amendment 1 (ISO 13260:2010/Amd 1:2017)
500 ME 108 EN ISO 13262:2017
501 ME 108 EN ISO 13263:2017
502 ME 108 EN ISO 13264:2017
503 ME 108 EN 13655:2018
504 ME 108 EN ISO 14853:2017
505 ME 108 EN 14932:2018
506 ME 108 EN 15534-1:2014+A1:2017
507 ME 108 EN 15534-6:2015+A1:2017
508 ME 108 EN ISO 15985:2017
509 ME 108 EN 17033:2018
510 ME 108 EN 17098-1:2018
511 ME 108 EN 17098-2:2018
512 ME 108 EN ISO 18830:2017
513 ME 108 EN ISO 19679:2017
514 ME 108 EN ISO 20029-1:2018
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam (ISO 13262:2010)
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength (ISO 13263:2010)
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings (ISO 13264:2010)
Plastics - Thermoplastic mulch films recoverable after use, for use in agriculture and horticulture
Plastics - Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system - Method by measurement of biogas production (ISO 14853:2016)
Plastics - Thermoplastic stretch films for wrapping silage bales
Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products
Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 6: Specifications for fencing profiles and elements
Plastics - Determination of the ultimate anaerobic biodegradation under high-solids anaerobic-digestion conditions - Method by analysis of released biogas (ISO 15985:2014)
Plastics - Biodegradable mulch films for use in agriculture and horticulture - Requirements and test methods
Plastics - Barrier films for agricultural and horticultural soil disinfection by fumigation - Part 1: Specifications for barrier films
Plastics - Barrier films for agricultural and horticultural soil disinfection by fumigation - Part 2: Method for film permeability determination using a static technique
Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sandy sediment interface - Method by measuring the oxygen demand in closed respirometer (ISO 18830:2016)
Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface - Method by analysis of evolved carbon dioxide (ISO 19679:2016)
Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 1: Designation system and basis for specification (ISO 20029-1:2017)
515 ME 108 EN ISO 20029-2:2018
516 ME 108 EN ISO 22007-1:2017
517 ME 108 EN ISO 22007-4:2017
518 ME 108 EN ISO 28017:2018
519 ME 109 EN ISO 6416:2017
520 ME 109 EN 12480:2018 Gas meters - Rotary displacement gas meters
521 ME 118 EN 847-1:2017
522 ME 118 EN 847-2:2017
523 ME 118 EN 1116:2018
Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimen and determination of properties (ISO 20029-2:2017)
Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO 22007-1:2017)
Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method (ISO 22007-4:2017)
Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications - Specification (ISO 28017:2018)
Hydrometry - Measurement of discharge by the ultrasonic transit time (time of flight) method (ISO 6416:2017)
Tools for woodworking - Safety requirements - Part 1: Milling tools, circular saw blades
Tools for woodworking - Safety requirements - Part 2: Requirements for the shank of shank mounted milling tools/circular saw blades
Furniture - Kitchen furniture - Coordinating sizes for kitchen furniture and kitchen appliances
524 ME 118 EN 1309-3:2018
525 ME 118 EN 13227:2017 Wood flooring - Solid lamparquet products
526 ME 118 EN 13489:2017
527 ME 118 EN 14298:2017 Sawn timber - Assessment of drying quality
528 ME 118 EN 16121:2013+A1:2017
529 ME 118 EN 16755:2017
530 ME 119 EN ISO 18753:2017
531 ME 125 EN 71-7:2014+A2:2018
532 ME 125 EN 71-8:2018 Safety of toys - Part 8: Activity toys for domestic use
533 ME 125 EN 71-14:2014+A1:2017 Safety of toys - Part 14: Trampolines for domestic use
534 ME 125 EN 71-3:2013+A2:2017 Safety of toys - Part 3: Migration of certain elements
535 ME 125 EN 71-7:2014+A1:2017
Round and sawn timber - Methods of measurements - Part 3: Features and biological degradations
Wood-flooring and parquet - Multi-layer parquet elements
Non-domestic storage furniture - Requirements for safety, strength, durability and stability
Durability of reaction to fire performance - Classes of fire-retardant treated wood products in interior and exterior end use applications
Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of absolute density of ceramic powders by pycnometer (ISO 18753:2017)
Safety of toys - Part 7: Finger paints - Requirements and test methods
Safety of toys - Part 7: Finger paints - Requirements and test methods
536 ME 128 EN 61810-2:2017 Electromechanical elementary relays - Part 2: Reliability
537 ME 128 EN 61810-2-1:2017
538 ME 129 EN IEC 62822-3:2018
539 ME 131 EN 60061-1:1993/A56:2017
540 ME 131 EN 60061-1:1993/A56:2017/AC:2017-11
541 ME 131 EN 60061-2:1993/A52:2017
542 ME 131 EN 60061-3:1993/A53:2017
543 ME 131 EN 60061-4:1992/A15:2017
544 ME 131 EN 60081:1998/A6:2017
545 ME 131 EN 60400:2017
546 ME 131 EN 60598-1:2015/A1:2018 Luminaires - Part 1: General requirements and tests
547 ME 131 EN IEC 60809:2015/A2:2018
548 ME 131 EN 60809:2015/A1:2017
549 ME 131 EN IEC 60810:2018
550 ME 131 EN 60838-1:2017/A1:2017
551 ME 131 EN 60901:1996/A6:2017
552 ME 131 EN 61184:2017 Bayonet lampholders
553 ME 131 EN IEC 62386-332:2018
554 ME 131 EN 62386-301:2017
555 ME 131 EN 62386-302:2017
556 ME 131 EN 62386-303:2017
557 ME 131 EN 62386-304:2017
558 ME 131 EN 62442-1:2011/A11:2017
Electromechanical elementary relays - Part 2-1: Reliability - Procedure for the verification of B10 values
Electric welding equipment - Assessment of restrictions related to human exposure to electromagnetic fields (0 Hz to 300 Hz) - Part 3: Resistance welding equipment
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information
Double-capped fluorescent lamps - Performance specifications
Lampholders for tubular fluorescent lamps and starterholders
Lamps for road vehicles - Dimensional, electrical and luminous requirements
Lamps for road vehicles - Dimensional, electrical and luminous requirements
Lamps, light sources and led packages for road vehicles - Performance requirements
Miscellaneous lampholders - Part 1: General requirements and tests
Single-capped fluorescent lamps - Performance specifications
Digital addressable lighting interface - Part 332: Particular requirements - Input devices - Feedback
Digital addressable lighting interface - Part 301: Particular requirements - Input devices - Push buttons
Digital addressable lighting interface - Part 302: Particular requirements - Input devices - Absolute input devices
Digital addressable lighting interface - Part 303: Particular requirements - Input devices - Occupancy sensor
Digital addressable lighting interface - Part 304: Particular requirements - Input devices - Light sensor
Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear
559 ME 131 EN 62442-2:2014/A11:2017
560 ME 131 EN 62442-3:2014/A11:2017
561 ME 131 EN IEC 62554:2011/A1:2018
562 ME 131 EN 62612:2013/A11:2017
563 ME 131 EN 62612:2013/A11:2017/AC:2017-11
564 ME 131 EN 62717:2017
565 ME 131 EN 62931:2017 GX16t-5 capped tubular led lamp - Safety specifications
566 ME 133 EN 62256:2017
567 ME 135 EN 60286-1:2017
568 ME 135 EN 60384-15:2017
569 ME 140 EN 61970-452:2017
570 ME 140 EN 62325-451-3:2014/A1:2017
571 ME 140 EN 62325-451-4:2017
572 ME 140 EN 62351-7:2017
573 ME 140 EN 62351-9:2017
574 ME 140 EN 62488-2:2017
575 ME 144 EN 13306:2017 Maintenance - Maintenance terminology
576 ME 144 EN 17007:2017 Maintenance process and associated indicators
577 ME 145 EN 60153-4:2017
Energy performance of lamp controlgear - Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the efficiency of the controlgear
Energy performance of lamp controlgear - Part 3: Controlgear for halogen lamps and LED modules - Method of measurement to determine the efficiency of the controlgear
Sample preparation for measurement of mercury level in fluorescent lamps
Self-ballasted LED lamps for general lighting services with supply voltages > 50 V - Performance requirements
Self-ballasted LED lamps for general lighting services with supply voltages > 50 V - Performance requirements
LED modules for general lighting - Performance requirements
Hydraulic turbines, storage pumps and pump-turbines - Rehabilitation and performance improvement
Packaging of components for automatic handling - Part 1: Tape packaging of components with axial leads on continuous tapes
Fixed capacitors for use in electronic equipment - Part 15: Sectional specification: Fixed tantalum capacitors with non-solid or solid electrolyte
Energy management system application program interface (EMS-API) - Part 452: CIM static transmission network model profiles
Framework for energy market communications - Part 451-3: Transmission capacity allocation business process (explicit or implicit auction) and contextual models for European market
Framework for energy market communications - Part 451-4: Settlement and reconciliation business process, contextual and assembly models for European market
Power systems management and associated information exchange - Data and communications security - Part 7: Network and System Management (NSM) data object models
Power systems management and associated information exchange - Data and communications security - Part 9: Cyber security key management for power system equipment
Power line communication systems for power utility applications - Part 2: Analogue power line carrier terminals or APLC
Hollow metallic waveguides - Part 4: Relevant specifications for circular waveguides
578 ME 145 EN 61076-3-104:2017
579 ME 145 EN 61076-3-122:2017
580 ME 145 EN 61169-59:2017
581 ME 145 EN 61587-6:2017
582 ME 147 EN 12102-1:2017
583 ME 147 EN 13771-2:2017
584 ME 147 EN ISO 14903:2017
585 ME 147 EN 17032:2018
586 ME 152 EN 13445-3:2014/A3:2017 Unfired pressure vessels - Part 3: Design
587 ME 157 EN ISO 2082:2017
588 ME 157 EN ISO 2360:2017
589 ME 157 EN ISO 9717:2017
590 ME 157 EN ISO 15589-1:2017
591 ME 157 EN 16866:2017
592 ME 157 EN ISO 18086:2017
593 ME 157 EN ISO 20274:2017
594 ME 157 EN ISO 27830:2017
Connectors for electrical and electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz
Connectors for electrical and electronic equipment - Product requirements - Part 3-122: Detail specification for 8-way, shielded, free and fixed connectors for I/O and Gigabit Ethernet applications in harsh environments
Radio-frequency connectors -Part 59: Sectional specification for type L32-4 and L32-5 threaded multi-pin radio-frequency connectors
Mechanical structures for electrical and electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 6: Security aspects for indoor cabinets
Air conditioners, liquid chilling packages, heat pumps, process chillers and dehumidifiers with electrically driven compressors - Determination of the sound power level - Part 1: Air conditioners, liquid chilling packages, heat pumps for space heating and cooling, dehumidifiers and process chillers
Compressors and condensing units for refrigeration - Performance testing and test methods - Part 2: Condensing units
Refrigerating systems and heat pumps - Qualification of tightness of components and joints (ISO 14903:2017)
Blast chillers and freezers cabinets for professional use - Classification, requirements and test conditions
Metallic and other inorganic coatings - Electroplated coatings of cadmium with supplementary treatments on iron or steel (ISO 2082:2017)
Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method (ISO 2360:2017)
Metallic and other inorganic coatings - Phosphate conversion coating of metals (ISO 9717:2017)
Petroleum, petrochemical and natural gas industries - Cathodic protection of pipeline systems - Part 1: On-land pipelines (ISO 15589-1:2015)
Metallic and other inorganic coatings - Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP test)
Corrosion of metals and alloys - Determination of AC corrosion - Protection criteria (ISO 18086:2015)
Vitreous and porcelain enamels - Preparation of samples and determination of thermal expansion coefficient (ISO 20274:2017)
Metallic and other inorganic coatings - Requirements for the designation of metallic and inorganic coatings (ISO 27830:2017)
595 ME 157 EN ISO 28706-3:2018
596 ME 159 EN 50655-1:2017
597 ME 159 EN 50655-2:2017
598 ME 159 EN 50655-3:2017
599 ME 159 EN 60811-201:2012/A1:2017
600 ME 159 EN 60811-202:2012/A1:2017
601 ME 159 EN 60811-401:2012/A1:2017
602 ME 159 EN 60811-410:2012/A1:2017
603 ME 159 EN 60811-508:2012/A1:2017
604 ME 159 EN 60811-509:2012/A1:2017
605 ME 159 EN 60811-511:2012/A1:2017
606 ME 161 EN 62282-3-201:2017
607 ME 161 EN 62282-4-102:2017
608 ME 164 EN 62056-5-3:2017
609 ME 164 EN 62056-6-1:2017
610 ME 164 EN 62056-8-5:2017
Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel or a tetragonal glass bottle (ISO 28706-3:2017)
Electric cables - Accessories - Material characterization - Part 1: Fingerprinting for resinous compounds
Electric cables - Accessories - Material characterization - Part 2: Fingerprinting for heat shrinkable components for low and medium voltage applications up to 20,8/36 (42) kV
Electric cables - Accessories - Material characterization - Part 3: Fingerprinting for cold shrinkable components for low and medium voltage applications up to 20,8/36 (42) kV
Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of insulation thickness
Electric and optical fibre cables - Test methods for non-metallic materials - Part 202: General tests - Measurement of thickness of non-metallic sheath
Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
Electric and optical fibre cables - Test methods for non-metallic materials - Part 410: Miscellaneous tests - Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors
Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths
Electric and optical fibre cables - Test methods for non-metallic materials - Part 509: Mechanical tests - Test for resistance of insulations and sheaths to cracking (heat shock test)
Electric and optical fibre cables - Test methods for non-metallic materials - Part 511: Mechanical tests - Measurement of the melt flow index of polyethylene and polypropylene compounds
Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems
Fuel cell technologies - Part 4-102: Fuel cell power systems for industrial electric trucks - Performance test methods
Electricity metering data exchange - The DLMS/COSEM suite - Part 5-3: DLMS/COSEM application layer
Electricity metering data exchange - The DLMS/COSEM suite - Part 6-1: Object Identification System (OBIS)
Electricity metering data exchange - The DLMS/COSEM suite - Part 8-5: Narrow-band OFDM G3-PLC communication profile for neighbourhood networks
611 ME 164 EN 62056-8-5:2017/AC:2018-01
612 ME 164 EN IEC 62056-6-2:2018
613 ME 164 EN 62056-8-6:2017
614 ME 165 EN 50341-2-13:2017/A1:2017
615 ME 165 EN 50341-2-8:2017
616 ME 165 EN 50341-2-9:2017
617 ME 166 EN 62586-1:2017
618 ME 166 EN 62586-2:2017
619 ME 166 EN 62754:2017 Computation of waveform Parameter uncertainties
620 ME 166 EN 62974-1:2017
621 ME 169 EN ISO 14692-1:2017
622 ME 169 EN ISO 14692-2:2017
623 ME 169 EN ISO 14692-3:2017
624 ME 169 EN ISO 14692-4:2017
625 ME 169 EN ISO 17781:2017
626 ME 169 EN ISO 18797-1:2017
627 ME 169 EN ISO 19901-2:2017
Electricity metering data exchange - The DLMS/COSEM suite - Part 8-5: Narrow-band OFDM G3-PLC communication profile for neighbourhood networks
Electricity metering data exchange - The DLMS/COSEM suite - Part 6-2: COSEM interface classes
Electricity metering data exchange - The DLMS/COSEM suite - Part 8-6: High speed PLC ISO/IEC 12139-1 profile for neighbourhood networks
Overhead electrical lines exceeding AC 1 kV - Part 2-13: National Normative Aspects (NNA) for ITALY (based on EN 50341-1:2012)
Overhead electrical lines exceeding AC 1 kV - Part 2-8: National Normative Aspects (NNA) for France (based on EN 50341-1:2012)
Overhead electrical lines exceeding AC 1 kV - Part 2-9: National Normative Aspects (NNA) for Great Britain and Northern Ireland (based on EN 50341-1:2012)
Power quality measurement in power supply systems - Part 1: Power quality instruments (PQI)
Power quality measurement in power supply systems - Part 2: Functional tests and uncertainty requirements
Monitoring and measuring systems used for data collection, gathering and analysis - Part 1: Device requirements
Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1: Vocabulary, symbols, applications and materials (ISO 14692-1:2017)
Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture (ISO 14692-2:2017)
Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design (ISO 14692-3:2017)
Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation (ISO 14692-4:2017)
Petroleum, petrochemical and natural gas industries - Test methods for quality control of microstructure of ferritic/austenitic (duplex) stainless steels (ISO 17781:2017)
Petroleum, petrochemical and natural gas industries - External corrosion protection of risers by coatings and linings - Part 1: Elastomeric coating systems-polychloroprene or EPDM (ISO 18797-1:2016)
Petroleum and natural gas industries - Specific requirements for offshore structures - Part 2: Seismic design procedures and criteria (ISO 19901-2:2017)
628 ME 169 EN ISO 24817:2017
629 ME 171 EN 1982:2017 Copper and copper alloys - Ingots and castings
630 ME 171 EN ISO 2143:2017
631 ME 171 EN ISO 2931:2018
632 ME 171 EN ISO 3210:2017
633 ME 171 EN ISO 7599:2018
634 ME 184 EN 10263-1:2017
635 ME 184 EN 10263-2:2017
636 ME 184 EN 10263-3:2017
637 ME 184 EN 10263-4:2017
638 ME 184 EN 10263-5:2017
639 ME 193 EN 61188-7:2017
640 ME 193 EN 61189-5-503:2017
641 ME 193 EN 61191-2:2017
642 ME 193 EN 61191-3:2017
643 ME 193 EN 61191-4:2017
644 ME 193 EN 62090:2017
Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and inspection (ISO 24817:2017, Corrected version 2018-01-01)
Anodizing of aluminium and its alloys - Estimation of loss of absorptive power of anodic oxidation coatings after sealing - Dye-spot test with prior acid treatment (ISO 2143:2017)
Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of admittance (ISO 2931:2017)
Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s) (ISO 3210:2017)
Anodizing of aluminium and its alloys - Method for specifying decorative and protective anodic oxidation coatings on aluminium (ISO 7599:2018)
Steel rod, bars and wire for cold heading and cold extrusion - Part 1: General technical delivery conditions
Steel rod, bars and wire for cold heading and cold extrusion - Part 2: Technical delivery conditions for steels not intended for heat treatment after cold working
Steel rod, bars and wire for cold heading and cold extrusion - Part 3: Technical delivery conditions for case hardening steels
Steel rod, bars and wire for cold heading and cold extrusion - Part 4: Technical delivery conditions for steels for quenching and tempering
Steel rod, bars and wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels
Printed boards and printed board assemblies - Design and use - Part 7: Electronic component zero orientation for CAD library construction
Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 5-503: General test method for materials and assemblies - Conductive anodic filaments (CAF) testing of circuit boards
Printed board assemblies - Part 2: Sectional specification - Requirements for surface mount soldered assemblies
Printed board assemblies - Part 3: Sectional specification - Requirements for through-hole mount soldered assemblies
Printed board assemblies - Part 4: Sectional specification - Requirements for terminal soldered assemblies
Product package labels for electronic components using bar code and two- dimensional symbologies
645 ME 202 EN ISO 6149-4:2017
646 ME 202 EN ISO 21809-5:2017
647 ME 218 EN ISO 16001:2017
648 ME 221 EN ISO 287:2017
649 ME 225 EN 303-1:2017
650 ME 225 EN 303-2:2017
651 ME 225 EN 304:2017
652 ME 230 EN ISO 8596:2018
653 ME 230 EN ISO 8980-1:2017
654 ME 230 EN ISO 8980-2:2017
655 ME 230 EN ISO 11978:2017
656 ME 230 EN ISO 11981:2017
657 ME 230 EN ISO 11986:2017
658 ME 230 EN ISO 18369-1:2017
659 ME 230 EN ISO 18369-2:2017
660 ME 230 EN ISO 18369-3:2017
661 ME 230 EN ISO 18369-4:2017
662 ME 231 EN ISO 10156:2017
Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs (ISO 6149-4:2017)
Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 5: External concrete coatings (ISO 21809-5:2017)
Earth-moving machinery - Object detection systems and visibility aids - Performance requirements and tests (ISO 16001:2017)
Paper and board - Determination of moisture content of a lot - Oven-drying method (ISO 287:2017)
Heating boilers - Part 1: Heating boilers with forced draught burners - Terminology, general requirements, testing and marking
Heating boilers - Part 2: Heating boilers with forced draught burners - Special requirements for boilers with atomizing oil burners
Heating boilers - Test code for heating boilers for atomizing oil burners
Ophthalmic optics - Visual acuity testing -- Standard and clinical optotypes and their presentation (ISO 8596:2017)
Ophthalmic optics - Uncut finished spectacle lenses - Part 1: Specifications for single-vision and multifocal lenses (ISO 8980-1:2017)
Ophthalmic optics - Uncut finished spectacle lenses - Part 2: Specifications for power-variation lenses (ISO 8980-2:2017)
Ophthalmic optics - Contact lenses and contact lens care products - Labelling (ISO 11978:2017)
Ophthalmic optics - Contact lenses and contact lens care products -Determination of physical compatibility of contact lens care products with contact lenses (ISO 11981:2017)
Ophthalmic optics - Contact lenses and contact lens care products - Determination of preservative uptake and release (ISO 11986:2017)
Ophthalmic optics - Contact lenses - Part 1: Vocabulary, classification system and recommendations for labelling specifications (ISO 18369-1:2017, Corrected version 2017-10-01)
Ophthalmic optics - Contact lenses - Part 2: Tolerances (ISO 18369-2:2017)
Ophthalmic optics - Contact lenses - Part 3: Measurement methods (ISO 18369-3:2017, Corrected version 2017-10-01)
Ophthalmic optics - Contact lenses - Part 4: Physicochemical properties of contact lens materials (ISO 18369-4:2017, Corrected version 2017-10-01)
Gas cylinders - Gases and gas mixtures - Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets (ISO 10156:2017)
663 ME 231 EN ISO 11363-1:2018
664 ME 231 EN ISO 11363-2:2017
665 ME 231 EN ISO 14246:2014/A1:2017
666 ME 231 EN ISO 15996:2017
667 ME 231 EN ISO 17879:2017
668 ME 238 EN 50631-1:2017
669 ME 238 EN 60350-2:2018
670 ME 238 EN 62863:2017
671 ME 239 EN 60335-2-86:2003/A12:2017
672 ME 239 EN 60335-2-89:2010/A2:2017
673 ME 270 EN 15507:2017
674 ME 270 EN 15969-1:2017
675 ME 270 EN 15969-2:2017
676 ME 270 EN 16973:2017
677 ME 298 EN 12791:2016+A1:2017
678 ME 298 EN 16956:2017
679 ME 305 EN 1860-1:2013+A1:2017/AC:2017
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications (ISO 11363-1:2018)
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 2: Inspection gauges (ISO 11363-2:2017)
Gas cylinders - Cylinder valves - Manufacturing tests and examinations - Amendment 1 (ISO 14246:2014/Amd 1:2017)
Gas cylinders - Residual pressure valves - Specification and type testing of cylinder valves incorporating residual pressure devices (ISO 15996:2017)
Gas cylinders - Self-closing cylinder valves - Specification and type testing (ISO 17879:2017)
Household appliances network and grid connectivity - Part 1: General Requirements, Generic Data Modelling and Neutral Messages
Household electric cooking appliances - Part 2: Hobs - Methods for measuring performance
Methods of measuring performances of electric hair clippers or trimmers for household use
Household and similar electrical appliances - Safety - Part 2-86: Particular requirements for electric fishing machines
Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor
Packaging - Transport packaging for dangerous goods - Comparative material testing of polyethylene grades
Tanks for transport of dangerous goods - Digital interface for the data transfer between tank vehicle and with stationary facilities - Part 1: Protocol specification - Control, measurement and event data
Tanks for transport of dangerous goods - Digital interface for the data transfer between tank vehicle and with stationary facilities - Part 2: Commercial and logistic data
Road vehicles for combined transport - Semitrailer - Vertical transhipment
Chemical disinfectants and antiseptics - Surgical hand disinfection - Test method and requirements (phase 2, step 2)
Cosmetics - Analytical methods - HPLC/UV method for the identification and assay of hydroquinone, ethers of hydroquinone and corticosteroids in skin whitening cosmetic products
Appliances, solid fuels and firelighters for barbecueing - Part 1: Barbecues burning solid fuels - Requirements and test methods
680 ME 311 EN IEC 60099-8:2018
681 ME 312 EN 50645:2017 Ecodesign requirements for small power transformers
682 ME 320 EN 1601:2017
683 ME 320 EN ISO 2592:2017
684 ME 320 EN ISO 4259-1:2017
685 ME 320 EN ISO 4259-2:2017
686 ME 320 EN ISO 5165:2018
687 ME 320 EN 15984:2017
688 ME 320 EN 16906:2017
689 ME 320 EN 16934:2017
690 ME 320 EN 16997:2017
691 ME 320 EN 17057:2018
692 ME 320 EN ISO 20623:2018
693 ME 324 EN ISO 10582:2018
694 ME 324 EN ISO 11378-2:2001/A1:2017
695 ME 324 EN 13329:2016+A1:2017
696 ME 324 EN 13553:2017
Surge arresters - Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV
Liquid petroleum products - Determination of organic oxygenate compounds and total organically bound oxygen content in unleaded petrol - Method by gas chromatography (O-FID)
Petroleum and related products - Determination of flash and fire points - Cleveland open cup method (ISO 2592:2017)
Petroleum and related products - Precision of measurement methods and results - Part 1: Determination of precision data in relation to methods of test (ISO 4259-1:2017)
Petroleum and related products - Precision of measurement methods and results - Part 2: Interpretation and application of precision data in relation to methods of test (ISO 4259-2:2017)
Petroleum products - Determination of the ignition quality of diesel fuels - Cetane engine method (ISO 5165:2017)
Petroleum industry and products - Determination of composition of refinery heating gas and calculation of carbon content and calorific value - Gas chromatography method
Liquid petroleum products - Determination of the ignition quality of diesel fuels - BASF engine method
Automotive fuels and fat and oil derivates - Determination of steryl glycosides in fatty acid methyl esters (FAME) - Method by GC-MS with prior purification by SPE
Liquid petroleum products - Determination of the sulfur content in Ethanol (E85) automotive fuel- Wavelength dispersive X-ray fluorescence spectrometric method
Automotive fuels and fat and oil derivates - Determination of saturated monoglycerides content in Fatty Acid Methyl Esters (FAME) - Method by GC-FID
Petroleum and related products - Determination of the extreme-pressure and anti-wear properties of lubricants - Four-ball method (European conditions) (ISO 20623:2017)
Resilient floor coverings - Heterogeneous poly(vinyl chloride) floor covering - Specifications (ISO 10582:2017)
Textile floor coverings - Laboratory soiling tests - Part 2: Drum test - Amendment 1 (ISO 11378-2:2001/Amd 1:2017)
Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods
Resilient floor coverings - Polyvinyl chloride floor coverings for use in special wet areas - Specification
697 ME 324 EN 13845:2017
698 ME 336 EN 14450:2017
699 ME 338 EN 301:2017
700 ME 338 EN 302-2:2017
701 ME 338 EN 302-3:2017
702 ME 338 EN ISO 787-17:2017
703 ME 338 EN ISO 787-21:2017
704 ME 338 EN ISO 2812-1:2017
705 ME 338 EN ISO 2812-4:2017
706 ME 338 EN ISO 6270-1:2018
707 ME 338 EN ISO 6270-2:2018
708 ME 338 EN ISO 11126-10:2017
709 ME 338 EN ISO 11997-1:2017
710 ME 338 EN ISO 12944-1:2017
711 ME 338 EN ISO 12944-2:2017
712 ME 338 EN ISO 12944-3:2017
713 ME 338 EN ISO 12944-4:2017
714 ME 338 EN ISO 12944-6:2018
Resilient floor coverings - Polyvinyl chloride floor coverings with particle based enhanced slip resistance - Specification
Secure storage units - Requirements, classification and methods of test for resistance to burglary - Secure safe cabinets
Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements
Adhesives for load-bearing timber structures - Test methods - Part 2: Determination of resistance to delamination
Adhesives for load-bearing timber structures - Test methods - Part 3: Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength
General methods of test for pigments and extenders - Part 17: Comparison of lightening power of white pigments (ISO 787-17:2002)
General methods of test for pigments and extenders - Part 21: Comparison of heat stability of pigments using a stoving medium (ISO 787-21:1979)
Paints and varnishes - Determination of resistance to liquids - Part 1: Immersion in liquids other than water (ISO 2812-1:2017)
Paints and varnishes - Determination of resistance to liquids - Part 4: Spotting methods (ISO 2812-4:2017)
Paints and varnishes - Determination of resistance to humidity - Part 1: Condensation (single-sided exposure) (ISO 6270-1:2017)
Paints and varnishes - Determination of resistance to humidity - Part 2: Condensation (in-cabinet exposure with heated water reservoir) (ISO 6270-2:2017)
Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 10: Almandite garnet (ISO 11126-10:2017)
Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 1: Wet (salt fog)/dry/humid (ISO 11997-1:2017)
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 1: General introduction (ISO 12944-1:2017)
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 2: Classification of environments (ISO 12944-2:2017)
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 3: Design considerations (ISO 12944-3:2017)
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 4: Types of surface and surface preparation (ISO 12944-4:2017)
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 6: Laboratory performance test methods (ISO 12944-6:2018)
715 ME 338 EN ISO 12944-7:2017
716 ME 338 EN ISO 12944-8:2017
717 ME 338 EN ISO 12944-9:2018
718 ME 338 EN ISO 15110:2017
719 ME 338 EN 15773:2018
720 ME 338 EN ISO 18451-1:2017
721 ME 338 EN ISO 18451-2:2017
722 ME 338 EN ISO 19399:2017
723 ME 338 EN ISO 23900-1:2018
724 ME 338 EN ISO 23900-2:2018
725 ME 338 EN ISO 23900-3:2018
726 ME 357 EN ISO 6145-6:2017
727 ME 373 EN ISO 17100:2015/A1:2017
728 ME 373 EN ISO 18295-1:2017
729 ME 373 EN ISO 18295-2:2017
730 ME 373 EN ISO 20108:2017
731 ME 374 EN ISO/IEC 17011:2017
732 ME 375 EN 50672:2017
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 7: Execution and supervision of paint work (ISO 12944-7:2017)
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 8: Development of specifications for new work and maintenance (ISO 12944-8:2017)
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 9: Protective paint systems and laboratory performance test methods for offshore and related structures (ISO 12944-9:2018)
Paints and varnishes - Artificial weathering including acidic deposition (ISO 15110:2017)
Industrial application of powder organic coatings to hot dip galvanized or sherardized steel articles [duplex systems] - Specifications, recommendations and guidelines
Pigments, dyestuffs and extenders - Terminology - Part 1: General terms (ISO 18451-1:2015)
Pigments, dyestuffs and extenders - Terminology - Part 2: Classification of colouring materials according to colouristic and chemical aspects (ISO 18451-2:2015)
Paints and varnishes - Wedge-cut method for determination of film thickness (scribe and drill method) (ISO 19399:2016)
Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 1: General introduction (ISO 23900-1:2015)
Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 2: Determination of colouristic properties and ease of dispersion in plasticized polyvinyl chloride by two-roll milling (ISO 23900-2:2015)
Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 3: Determination of colouristic properties and ease of dispersion of black and colour pigments in polyethylene by two-roll milling (ISO 23900-3:2015)
Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6: Critical flow orifices (ISO 6145-6:2017)
Translation services - Requirements for translation services - Amendment 1 (ISO 17100:2015/Amd 1:2017)
Customer contact centres - Part 1: Requirements for customer contact centres (ISO 18295-1:2017)
Customer contact centres - Part 2: Requirements for clients using the services of customer contact centres (ISO 18295-2:2017)
Simultaneous interpreting - Quality and transmission of sound and image input - Requirements (ISO 20108:2017)
Conformity assessment - Requirements for accreditation bodies accrediting conformity assessment bodies (ISO/IEC 17011:2017)
Ecodesign requirements for computers and computer servers
733 MEN 359 EN ISO 19115-1:2014/A1:2018
734 MEN 359 EN ISO 19157:2013/A1:2018
735 MM 53 EN 13284-1:2017
736 MM 53 EN 13284-2:2017
737 MM 323 EN ISO 14044:2006/A1:2018
738 MM 360 EN ISO 11508:2017
739 MM 360 EN 16766:2017 Bio-based solvents - Requirements and test methods
740 MM 360 EN ISO 17601:2018
741 MM 360 EN ISO 18187:2018
742 MM 360 EN ISO 18311:2018
743 MMJS 54 EN ISO 7243:2017
744 MMJS 54 EN ISO 7250-1:2017
745 MMJS 54 EN ISO 9241-125:2017
746 MMJS 54 EN ISO 9241-960:2017
747 MMJS 54 EN ISO 10075-1:2017
748 MMJS 59 EN 12013:2018
749 MMJS 59 EN ISO 16092-1:2018
750 MMJS 59 EN ISO 16092-3:2018
751 MMJS 66 EN 565:2017
752 MMJS 77 EN 1853:2017 Agricultural machinery - Trailers - Safety
753 MMJS 77 EN ISO 4254-7:2017
Geographic information - Metadata - Part 1: Fundamentals - Amendment 1 (ISO 19115-1:2014/Amd 1:2018)
Geographic information - Data quality - Amendment 1: Describing data quality using coverages (ISO 19157:2013/Amd 1:2018)
Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method
Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Quality assurance of automated measuring systems
Environmental management - Life cycle assessment - Requirements and guidelines - Amendment 1 (ISO 14044:2006/Amd 1:2017)
Soil quality - Determination of particle density (ISO 11508:2017)
Soil quality - Estimation of abundance of selected microbial gene sequences by quantitative PCR from DNA directly extracted from soil (ISO 17601:2016)
Soil quality - Contact test for solid samples using the dehydrogenase activity of Arthrobacter globiformis (ISO 18187:2016)
Soil quality - Method for testing effects of soil contaminants on the feeding activity of soil dwelling organisms - Bait-lamina test (ISO 18311:2016)
Ergonomics of the thermal environment - Assessment of heat stress using the WBGT (wet bulb globe temperature) index (ISO 7243:2017)
Basic human body measurements for technological design - Part 1: Body measurement definitions and landmarks (ISO 7250-1:2017)
Ergonomics of human-system interaction - Part 125: Guidance on visual presentation of information (ISO 9241-125:2017)
Ergonomics of human-system interaction - Part 960: Framework and guidance for gesture interactions (ISO 9241-960:2017)
Ergonomic principles related to mental workload - Part 1: General issues and concepts, terms and definitions (ISO 10075-1:2017)
Plastics and rubber machines - Internal mixers - Safety requirements
Machine tools safety - Presses - Part 1: General safety requirements (ISO 16092-1:2017)
Machine tools safety - Presses - Part 3: Safety requirements for hydraulic presses (ISO 16092-3:2017)
Mountaineering equipment - Tape - Safety requirements and test methods
Agricultural machinery - Safety - Part 7: Combine harvesters, forage harvesters, cotton harvesters and sugar cane harversters (ISO 4254-7:2017)
754 MMJS 77 EN ISO 5395-3:2013/A2:2018
755 MMJS 77 EN 15695-1:2017
756 MMJS 77 EN 15695-2:2017
757 MMJS 84 EN ISO 19225:2017
758 MMJS 85 EN 1459-1:2017
759 MMJS 85 EN 12999:2011+A2:2018 Cranes - Loader cranes
760 MMJS 85 EN 13001-3-1:2012+A2:2018
761 MMJS 85 EN 13001-3-6:2018
762 MMJS 85 EN 16719:2018 Transport platforms
763 MMJS 118 EN 1870-6:2017
764 MMJS 118 EN ISO 19085-3:2017
765 MMJS 118 EN ISO 19085-6:2017
766 MMJS 118 EN ISO 19085-8:2018
767 MMJS 118 EN ISO 19085-1:2017
768 MMJS 118 EN ISO 19085-2:2017
769 MMJS 118 EN ISO 19085-5:2017
770 MMJS 137 EN 14460:2018 Explosion resistant equipment
771 MMJS 137 EN IEC 60079-7:2015/A1:2018
772 MMJS 137 EN 60079-30-1:2017
773 MMJS 137 EN 60079-13:2017
774 MMJS 137 EN 60079-30-2:2017
Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 3: Ride-on lawnmowers with seated operator - Amendment 2: Cutting means enclosure guards (ISO 5395-3:2013/Amd 2:2017)
Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 1: Cab classification, requirements and test procedures
Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 2: Filters, requirements and test procedures
Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems (ISO 19225:2017)
Rough-terrain trucks - Safety requirements and verification - Part 1: Variable-reach trucks
Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure
Cranes - General design - Part 3-6: Limit states and proof of competence of machinery - Hydraulic cylinders
Safety of woodworking machines - Circular sawing machines - Part 6: Circular sawing machines for fire wood
Woodworking machines - Safety requirements - Part 3: Numerically controlled (NC) boring and routing machines (ISO 19085-3:2017)
Woodworking machines - Safety - Part 6: Single spindle vertical moulding machines ("toupies") (ISO 19085-6:2017)
Woodworking machines - Safety - Part 8: Belt sanding and calibrating machines for straight workpieces (ISO 19085-8:2017)
Woodworking machines - Safety - Part 1: Common requirements (ISO 19085-1:2017)
Woodworking machines - Safety - Part 2: Horizontal beam panel circular sawing machines (ISO 19085-2:2017, Corrected version 2017-11-01)
Woodworking machines - Safety - Part 5: Dimension saws (ISO 19085-5:2017)
Explosive atmospheres - Part 7: Equipment protection by increased safety "e"
Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements
Explosive atmospheres - Part 13: Equipment protection by pressurized room "p" and artificially ventilated room "v"
Explosive atmospheres - Part 30-2: Electrical resistance trace heating - Application guide for design, installation and maintenance
775 MMJS 176 EN 61057:2017
776 MMJS 218 EN 474-1:2006+A5:2018
777 MMJS 223 EN ISO 14118:2018
778 MMJS 227 EN 342:2017
779 MMJS 227 EN 353-1:2014+A1:2017
780 MMJS 227 EN 13158:2018
781 MMJS 227 EN 13277-8:2017
782 MMJS 227 EN ISO 13506-1:2017
783 MMJS 227 EN 13634:2017
784 MMJS 227 EN 13911:2017
785 MMJS 227 EN 14058:2017
786 MMJS 227 EN 14225-1:2017
787 MMJS 227 EN 14225-2:2017
788 MMJS 227 EN 14225-3:2017
789 MMJS 227 EN ISO 19918:2017
790 MMJS 227 EN ISO 20349-1:2017
791 MMJS 227 EN ISO 20349-2:2017
792 MMJS 227 EN ISO 27065:2017
793 MMJS 230 EN ISO 11554:2017
794 MMJS 239 EN 50569:2013/A1:2018
Live working - Insulating aerial devices for mounting on a chassis
Earth-moving machinery - Safety - Part 1: General requirements
Safety of machinery - Prevention of unexpected start-up (ISO 14118:2017)
Protective clothing - Ensembles and garments for protection against cold
Personal fall protection equipment - Guided type fall arresters including an anchor line - Part 1: Guided type fall arresters including a rigid anchor line
Protective clothing - Protective jackets, body and shoulder protectors for equestrian use, for horse riders and those working with horses, and for horse drivers - Requirements and test methods
Protective equipment for martial arts - Part 8: Additional requirements and test methods for karate face protectors
Protective clothing against heat and flame - Part 1: Test method for complete garments - Measurement of transferred energy using an instrumented manikin (ISO 13506-1:2017)
Protective footwear for motorcycle riders - Requirements and test methods
Protective clothing for firefighters - Requirements and test methods for fire hoods for firefighters
Protective clothing - Garments for protection against cool environments
Diving suits - Part 1: Wet suits - Requirements and test methods
Diving suits - Part 2: Dry suits - Requirements and test methods
Diving suits - Part 3: Actively heated or cooled suit systems and components - Requirements and test methods
Protective clothing - Protection against chemicals - Measurement of cumulative permeation of chemicals with low vapour pressure through materials (ISO 19918:2017)
Personal protective equipment - Footwear protecting against risks in foundries and welding - Part 1: Requirements and test methods for protection against risks in foundries (ISO 20349-1:2017)
Personal protective equipment - Footwear protecting against risks in foundries and welding - Part 2: Requirements and test methods for protection against risks in welding and allied processes (ISO 20349-2:2017)
Protective clothing - Performance requirements for protective clothing worn by operators applying pesticides and for re-entry workers (ISO 27065:2017)
Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2017)
Household and similar electrical appliances - Safety - Particular requirements for commercial electric spin extractors
795 MMJS 239 EN 50570:2013/A1:2018
796 MMJS 239 EN 50571:2013/A1:2018
797 MMJS 255 EN 50636-2-107:2015/A1:2018
798 MMJS 255 EN 62841-2-1:2018
799 MMJS 255 EN 62841-2-17:2017
800 MMJS 255 EN 62841-3-1:2014/A11:2017
801 MMJS 255 EN 62841-3-10:2015/A11:2017
802 MMJS 255 EN 62841-3-14:2017
803 MMJS 255 EN 62841-3-4:2016/A11:2017
804 MMJS 255 EN 62841-3-6:2014/A11:2017
805 MMJS 255 EN 62841-3-9:2015/A11:2017
806 MMJS 255 EN 62841-3-13:2017
807 MMJS 274 EN ISO 389-1:2018
808 MMJS 274 EN ISO 28927-2:2009/A1:2017
809 MMJS 318 EN 12453:2017
Household and similar electrical appliances - Safety - Particular requirements for commercial electric tumble dryers
Household and similar electrical appliances - Safety - Particular requirements for commercial electric washing machines
Safety of household and similar appliances - Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-1: Particular requirements for hand-held drills and impact drills
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-17: Particular requirements for hand-held routers
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws (IEC 62841-3-1:2014, modified)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-10: Particular requirements for transportable cut-off machines
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-14: Particular requirements for transportable drain cleaners
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders
Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 3-6: Particular requirements for transportable diamond drills with liquid system
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-13: Particular requirements for transportable drills
Acoustics - Reference zero for the calibration of audiometric equipment - Part 1: Reference equivalent threshold sound pressure levels for pure tones and supra-aural earphones (ISO 389-1:2017)
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 2: Wrenches, nutrunners and screwdrivers - Amendment 1: Changes in annex C - Brake device (ISO 28927-2:2009/Amd 1:2017)
Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Requirements and test methods
810 MS 22 EN 50637:2017
811 MS 22 EN 82304-1:2017
812 MS 230 EN ISO 14889:2013/A1:2017
813 MS 230 EN ISO 15798:2013/A1:2017
814 MS 230 EN ISO 16671:2015/A1:2017
815 MS 230 EN ISO 21987:2017
816 MS 279 EN 50364:2018
817 MS 279 EN 50647:2017
818 MS 279 EN 50663:2017
819 MS 279 EN 50664:2017
820 MS 279 EN 50665:2017
821 MS 279 EN 62232:2017
822 MS 377 EN ISO 5359:2014/A1:2017
823 MS 377 EN ISO 6710:2017
824 MS 377 EN ISO 7492:2018 Dentistry - Dental explorer (ISO 7492:2018)
825 MS 377 EN ISO 8536-14:2018
826 MS 377 EN ISO 9917-2:2017
827 MS 377 EN ISO 10555-1:2013/A1:2017
Medical electrical equipment - Particular requirements for the basic safety and essential performance of medical beds for children
Health Software - Part 1: General requirements for product safety
Ophthalmic optics - Spectacle lenses - Fundamental requirements for uncut finished lenses - Amendment 1 (ISO 14889:2013/Amd 1:2017)
Ophthalmic implants - Ophthalmic viscosurgical devices - Amendment 1 (ISO 15798:2013/Amd 1:2017)
Ophthalmic implants - Irrigating solutions for ophthalmic surgery - Amendment 1 (ISO 16671:2015/Amd 1:2017)
Ophthalmic optics - Mounted spectacle lenses (ISO 21987:2017)
Product standard for human exposure to electromagnetic fields from devices operating in the frequency range 0 Hz to 300 GHz, used in Electronic Article Surveillance (EAS), Radio Frequency Identification (RFID) and similar applications
Basic standard for the evaluation of workers' exposure to electric and magnetic fields from equipment and installations for the production, transmission and distribution of electricity
Generic standard for assessment of low power electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (10 MHz - 300 GHz)
Generic standard to demonstrate the compliance of equipment used by workers with limits on exposure to electromagnetic fields (0 Hz - 300 GHz), when put into service or in situ
Generic standard for assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz)
Determination of RF field strength, power density and SAR in the vicinity of radiocommunication base stations for the purpose of evaluating human exposure
Anaesthetic and respiratory equipment - Low-pressure hose assemblies for use with medical gases - Amendment 1 (ISO 5359:2014/Amd 1:2017)
Single-use containers for human venous blood specimen collection (ISO 6710:2017)
Infusion equipment for medical use - Part 14: Clamps and flow regulators for transfusion and infusion equipment without fluid contact (ISO 8536-14:2016)
Dentistry - Water-based cements - Part 2: Resin-modified cements (ISO 9917-2:2017)
Intravascular catheters - Sterile and single-use catheters - Part 1: General requirements - Amendment 1 (ISO 10555-1:2013/Amd 1:2017)
828 MS 377 EN ISO 10555-6:2017
829 MS 377 EN ISO 10993-16:2017
830 MS 377 EN ISO 10993-4:2017
831 MS 377 EN ISO 11608-7:2017
832 MS 377 EN ISO 11737-1:2018
833 MS 377 EN ISO 13897:2018
834 MS 377 EN ISO 14457:2017 Dentistry - Handpieces and motors (ISO 14457:2017)
835 MS 377 EN ISO 17664:2017
836 MS 377 EN ISO 18082:2014/A1:2017
837 MS 377 EN ISO 19023:2018 Dentistry - Orthodontic anchor screws (ISO 19023:2018)
838 MS 377 EN ISO 19448:2018
839 MS 377 EN ISO 20126:2012/A1:2018
840 MS 377 EN ISO 21533:2018
841 MS 377 EN ISO 22112:2017
842 MS 377 EN ISO 80601-2-55:2018
843 MT 4 EN 50126-1:2017
844 MT 4 EN 50126-2:2017
845 MT 4 EN 50239:2018
846 MT 4 EN 50343:2014/A1:2017
847 MT 4 EN 50463-1:2017
848 MT 4 EN 50463-2:2017
Intravascular catheters - Sterile and single-use catheters - Part 6: Subcutaneous implanted ports (ISO 10555-6:2015)
Biological evaluation of medical devices - Part 16: Toxicokinetic study design for degradation products and leachables (ISO 10993-16:2017)
Biological evaluation of medical devices - Part 4: Selection of tests for interactions with blood (ISO 10993-4:2017)
Needle-based injection systems for medical use - Requirements and test methods - Part 7: Accessibility for persons with visual impairment (ISO 11608-7:2016)
Sterilization of health care products - Microbiological methods - Part 1: Determination of a population of microorganisms on products (ISO 11737-1:2018)
Dentistry - Dental amalgam reusable mixing-capsules (ISO 13897:2018)
Processing of health care products - Information to be provided by the medical device manufacturer for the processing of medical devices (ISO 17664:2017)
Anaesthetic and respiratory equipment - Dimensions of non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases - Amendment 1 (ISO 18082:2014/Amd 1:2017)
Dentistry - Analysis of Fluoride Concentration in Aqueous Solutions by use of Fluoride-Ion Selective Electrode (ISO 19448:2018)
Dentistry - Manual toothbrushes - General requirements and test methods - Amendment 1 (ISO 20126:2012/Amd 1:2018)
Dentistry - Reprocessable cartridge syringes for intraligamentary injections (ISO 21533:2018)
Dentistry - Artificial teeth for dental prostheses (ISO 22112:2017)
Medical electrical equipment - Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors (ISO 80601-2-55:2018)
Railway Applications - The Specification and Demonstration of Reliability, Availability, Maintainability and Safety (RAMS) - Part 1: Generic RAMS Process
Railway Applications - The Specification and Demonstration of Reliability, Availability, Maintainability and Safety (RAMS) - Part 2: Systems Approach to Safety
Railway applications - Radio remote control system of traction vehicle for shunting application
Railway applications - Rolling stock - Rules for installation of cabling
Railway applications - Energy measurement on board trains - Part 1: General
Railway applications - Energy measurement on board trains - Part 2: Energy measuring
849 MT 4 EN 50463-3:2017
850 MT 4 EN 50463-4:2017
851 MT 4 EN 50463-5:2017
852 MT 4 EN 50562:2018
853 MT 4 EN 50657:2017
854 MT 4 EN 60077-1:2017
855 MT 4 EN 60077-2:2017
856 MT 72 EN 2004-7:2017
857 MT 72 EN 2034:2017
858 MT 72 EN 2036:2017
859 MT 72 EN 2037:2017
860 MT 72 EN 2040:2017
861 MT 72 EN 2053:2017
862 MT 72 EN 2119:2017
863 MT 72 EN 2135:2017
864 MT 72 EN 2137:2017
865 MT 72 EN 2174:2017
866 MT 72 EN 2221:2017
867 MT 72 EN 2222:2017
868 MT 72 EN 2287:2017
869 MT 72 EN 2306:2017
870 MT 72 EN 2667-2:2018
871 MT 72 EN 2850:2017
872 MT 72 EN 3094:2017
Railway applications - Energy measurement on board trains - Part 3: Data handling
Railway applications - Energy measurement on board trains - Part 4: Communication
Railway applications - Energy measurement on board trains - Part 5: Conformity assessment
Railway applications - Fixed installations - Process, protective measures and demonstration of safety for electric traction systems
Railways Applications - Rolling stock applications - Software on Board Rolling Stock
Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules
Railway applications - Electric equipment for rolling stock - Part 2: Electrotechnical components - General rules
Aerospace series - Test methods for aluminium and aluminium alloy products - Part 7: Reference blocks for the calibration of measuring equipment used in the determination of electrical conductivity of wrought aluminium and aluminium alloys
Aerospace series - Round steel bars drawn and/or descaled - Dimensions - Tolerance h 11
Aerospace series - Round steel bars ground - Dimensions - Tolerance h 8
Aerospace series - Hexagonal steel bars drawn - Dimensions - Tolerances h 11 and h 12
Aerospace series - Rectangular steel bars rolled - Dimensions - Tolerance js 16
Aerospace series - U-section aluminium alloy folded profiles - Dimensions
Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Solution treated and precipitation treated - Wires for rivets - 2 mm ? D ? 10 mm - Rm ? 960 MPa
Aerospace series - Steel FE-PL61 - Carburized, hardened and tempered - Bar - De ? 40 mm
Aerospace series - Steel FE-PL75 - 1 100 MPa ? Rm ? 1 250 MPa - Bars - De ? 100 mm
Aerospace series - Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15) - Solution treated and precipitation treated - Forgings - De ? 100 mm - Rm ? 850 MPa
Aerospace series - Steel FE-PL31 - Hardened and tempered - Hollow bars - 3,5 mm ? a ? 55 mm
Aerospace series - Steel FE-PL31 - Hardened and tempered - Hand and die forgings
Aerospace series - Bush, plain, in corrosion resisting steel with self-lubricating liner - Dimensions and loads
Aerospace series - Heat resisting - Nickel base alloy Ni-Cr20Co3Fe3 - Annealed - Bars
Aerospace series - Non-metallic materials - Foaming structural adhesives - Test methods - Part 2: Compressive tube shear
Aerospace series - Carbon fibre thermosetting resin - Unidirectional laminates - Compression test parallel to fibre direction
Aerospace series - Sealants - Test method - Determination of the application time
873 MT 72 EN 3451:2017
874 MT 72 EN 3820:2017
875 MT 72 EN 3875:2017
876 MT 72 EN 3904:2017
877 MT 72 EN 4691-1:2017
878 MT 72 EN 4691-2:2018
879 MT 72 EN 4692:2017
880 MT 72 EN 4693:2017
881 MT 72 EN 4694:2017
882 MT 72 EN 4695:2017
883 MT 72 EN 4702-02:2017
884 MT 72 EN 4702-03:2017
885 MT 72 EN 4702-04:2017
886 MT 72 EN 4702-05:2017
887 MT 72 EN 4729:2017
888 MT 72 EN 6018:2017
889 MT 72 EN 6041:2018
890 MT 72 EN 6064:2017
891 MT 72 EN 6128:2017
892 MT 72 EN 9117:2017
893 MT 72 EN 9300-005:2017
894 MT 72 EN 9300-007:2017
Aerospace series - Titanium TI-P99002 - Not heat treated - Grade 2 forging stock, for annealed forgings - a or D ? 300 mm
Aerospace series - Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature)/315 °C
Aerospace series - Metallic materials, Filler metal for brazing - Technical specification
Aerospace series - Washers, wire locking in aluminium alloy, anodized
Aerospace series - Tie rod with integrated bolts - Part 1: Technical specification
Aerospace series - Tie rod with integrated bolts - Part 2: Overview construction kit
Aerospace series - Tie Rod with integrated bolts -Locking clip
Aerospace series - Tie rod with integrated bolts - Assembly code A, B and C
Aerospace series - Tie rod with integrated bolts - Assembly code D, E and F
Aerospace series - Tie Rod with integrated bolts - Assembly Code G, H and K
Aerospace series - Quick release fastening systems for non-structural and lining applications - Part 02: Spring clamp stud combination
Aerospace series - Quick release fastening systems for non-structural and lining applications - Part 03: Stud - quick-release and locking
Aerospace series - Quick release fastening systems for non-structural and lining applications - Part 04: Spring clamp
Aerospace series - Quick release fastening systems for non-structural and lining applications - Part 05: Retaining washer
Aerospace series - Trivalent chromium based chemical conversion coatings for aluminium and aluminium alloys
Aerospace series - Test methods for metallic materials - Determination of density according to displacement method
Aerospace series - Non-metallic materials - Test method - Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC)
Aerospace series - Analysis of non-metallic materials (cured) for the determination of the extent of cure by Differential Scanning Calorimetry (DSC)
Aerospace series - Blind bolt, 100° flush head, high strength
Aerospace series - Delegated Product Release Verification
Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 005: Authentication and Verification
Aerospace series - LOTAR -LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 007: Terms and References
895 MT 72 EN 16603-70-41:2017
896 MT 72 EN 16603-10-24:2017 Space engineering - Interface management
897 MT 143 EN 62287-1:2017
898 MT 146 EN 12080:2017 Railway applications - Axleboxes - Rolling bearings
899 MT 146 EN 12081:2017 Railway applications - Axleboxes - Lubricating greases
900 MT 146 EN 12082:2017 Railway applications - Axleboxes - Performance testing
901 MT 146 EN 13103-1:2017
902 MT 146 EN 13848-5:2017
903 MT 146 EN 14478:2017 Railway applications - Braking - Generic vocabulary
904 MT 146 EN 15654-1:2018
905 MT 146 EN 16186-2:2017
906 MT 146 EN 16432-2:2017
907 MT 146 EN 16839:2017 Railway applications - Rolling stock - Head stock layout
908 MT 146 EN 16922:2017
909 MT 199 EN ISO 8099-1:2018
910 MT 199 EN ISO 8665:2017
911 MT 199 EN ISO 8846:2017
912 MT 199 EN ISO 8847:2017
913 MT 199 EN ISO 8848:2017 Small craft - Remote steering systems (ISO 8848:1990)
914 MT 199 EN ISO 9094:2017 Small craft - Fire protection (ISO 9094:2015)
915 MT 199 EN ISO 9097:2017 Small craft - Electric fans (ISO 9097:1991)
916 MT 199 EN ISO 9775:2017
917 MT 199 EN ISO 10088:2017
918 MT 199 EN ISO 10133:2017
919 MT 199 EN ISO 10239:2017
920 MT 199 EN ISO 10592:2017
Space engineering - Telemetry and telecommand packet utilization
Maritime navigation and radiocommunication equipment and systems - Class B shipborne equipment of the automatic identification system (AIS) - Part 1: Carrier-sense time division multiple access (CSTDMA) techniques
Railway applications - Wheelsets and bogies - Part 1: Design method for axles with external journals
Railway applications - Track - Track geometry quality - Part 5: Geometric quality levels - Plain line, switches and crossings
Railway applications - Measurement of vertical forces on wheels and wheelsets - Part 1: On-track measurement sites for vehicles in service
Railway applications - Driver's cab - Part 2: Integration of displays, controls and indicators
Railway applications - Ballastless track systems - Part 2: System design, subsystems and components
Railway applications - Ground based services - Vehicle waste water discharge equipment
Small craft - Waste systems - Part 1: Waste water retention (ISO 8099-1:2018)
Small craft - Marine propulsion reciprocating internal combustion engines - Power measurements and declarations (ISO 8665:2006)
Small craft - Electrical devices - Protection against ignition of surrounding flammable gases (ISO 8846:1990)
Small craft - Steering gear - Cable and pulley systems (ISO 8847:2004)
Small craft - Remote steering systems for single outboard motors of 15 kW to 40 kW power (ISO 9775:1990)
Small craft - Permanently installed fuel systems (ISO 10088:2013)
Small craft - Electrical systems - Extra-low-voltage d.c. installations (ISO 10133:2012)
Small craft - Liquefied petroleum gas (LPG) systems (ISO 10239:2014)
Small craft - Hydraulic steering systems (ISO 10592:1994)
921 MT 199 EN ISO 11105:2017
922 MT 199 EN ISO 12217-1:2017
923 MT 199 EN ISO 12217-2:2017
924 MT 199 EN ISO 12217-3:2017
925 MT 199 EN ISO 13929:2017
926 MT 199 EN ISO 15584:2017
927 MT 199 EN ISO 15652:2017
928 MT 199 EN ISO 16147:2017
929 MT 199 EN ISO 18422:2017
930 MT 303 EN 2267-009:2017
931 MT 303 EN 2267-010:2017
932 MT 303 EN 2346-005:2017
933 MT 303 EN 2997-006:2017
934 MT 303 EN 3475-603:2018
935 MT 303 EN 3475-604:2018
936 MT 303 EN 3475-605:2018
937 MT 303 EN 3475-701:2017
938 MT 303 EN 3475-707:2017
Small craft - Ventilation of petrol engine and/or petrol tank compartments (ISO 11105:1997)
Small craft - Stability and buoyancy assessment and categorization - Part 1: Non-sailing boats of hull length greater than or equal to 6 m (ISO 12217-1:2015)
Small craft - Stability and buoyancy assessment and categorization - Part 2: Sailing boats of hull length greater than or equal to 6 m (ISO 12217-2:2015)
Small craft - Stability and buoyancy assessment and categorization - Part 3: Boats of hull length less than 6 m (ISO 12217-3:2015)
Small craft - Steering gear - Geared link systems (ISO 13929:2001)
Small craft - Inboard petrol engines - Engine-mounted fuel and electrical components (ISO 15584:2001)
Small craft - Remote steering systems for inboard mini jet boats (ISO 15652:2003)
Small craft - Inboard diesel engines - Engine-mounted fuel and electrical components (ISO 16147:2002, including Amd 1:2013)
Ships and marine technology - Inland navigation vessels - Plate with instructions for rescue, resuscitation and first aid for drowning persons (ISO 18422:2014)
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 009: DRA family, single and multicore assembly - Product standard
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 010: DR family, single UV laser printable - Product standard
Aerospace series - Cable, electrical, fire resistant - Operating temperatures between -65 °C and 260 °C - Part 005: DW family, single UV laser printable and multicore assembly - Light weight - Product standard
Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 006: Hermetic jam-nut mounted receptacle - Product standard
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 603: Resistance to wet arc tracking
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 604: Resistance to dry arc propagation
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 605: Wet short circuit test
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 701: Strippability and adherence of insulation to the conductor
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 707: Stabilization of assembly
939 MT 303 EN 3660-031:2017
940 MT 303 EN 3660-032:2017
941 MT 303 EN 3660-034:2017
942 MT 303 EN 3660-035:2017
943 MT 303 EN 3660-066:2017
944 MT 303 EN 4008-004:2017
945 MT 303 EN 4533-002:2017
946 MT 303 EN 4533-003:2017
947 MT 303 EN 4533-004:2018
948 MT 303 EN 4644-001:2017
949 MT 303 EN 4652-002:2017
950 MT 303 EN 4652-221:2017
951 MT 303 EN 4652-222:2017
952 MT 303 EN 4652-320:2017
953 MT 303 EN 4652-321:2017
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 031: Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed - Product standard
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 032: Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed - Product standard
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 034: Memory metal rings, style Z, for the attachment of screens - Product standard
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 035: Cable outlet, style K, 90°, for heat shrinkable boot, shielded, sealed - Product standard
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 066: Cable outlet, style K, 90°, for heat shrinkable boot, shielded, sealed - Product standard
Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 004: Die for crimping tool M22520/5-01 - Product standard
Aerospace series - Fibre optic systems - Handbook - Part 002: Test and measurement
Aerospace series - Fibre optic systems - Handbook - Part 003: Looming and installation practices
Aerospace series - Fibre optic systems - Handbook - Part 004: Repair, maintenance, cleaning and inspection
Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 001: Technical specification
Aerospace series - Connectors, coaxial, radiofrequency - Part 002: Specification of performances
Aerospace series - Connectors, coaxial, radio frequency - Part 221: Type 2, TNC interface - Crimp version - Right angle plug - Product standard
Aerospace series - Connectors, coaxial, radio frequency - Part 222: Type 2, TNC interface - Crimp version - Square flange receptacle - Product standard
Aerospace series - Connectors, coaxial, radio frequency - Part 320: Type 3, N interface - Crimp version - Straight plug - Product standard
Aerospace series - Connectors, coaxial, radio frequency - Part 321: Type 3, N interface - Crimp assembly version - Right angle plug - Product standard
954 MT 303 EN 4652-322:2017
955 MT 303 EN 4652-420:2017
956 MT 303 EN 4652-421:2017
957 MT 303 EN 4652-220:2017
958 MT 303 EN 4674-004:2017
959 MT 303 EN 4708-104:2017
960 MT 303 EN 6049-008:2017
961 MT 303 EN 6059-303:2017
962 MT 303 EN 6059-503:2017
963 MT 345 EN ISO 16407-1:2017
964 MT 345 EN ISO 16410-1:2017
965 MT 345 EN ISO 25110:2017
Aerospace series - Connectors, coaxial, radio frequency - Part 322: Type 3, N interface - Crimp version - Square flange receptacle - Product standard
Aerospace series - Connectors, coaxial, radio frequency - Part 420: Type 4, C interface - Crimp assembly version - Straight plug - Product standard
Aerospace series - Connectors, coaxial, radio frequency - Part 421: Type 4, C interface - Crimp assembly version - Right angle plug - Product standard
Aerospace series - Connectors, coaxial, radio frequency - Part 220: Type 2, TNC interface - Crimp version - Straight plug - Product standard
Aerospace series - Electrical cables, installation - Self-wrapping shielding (EMI) protective sleeve - Part 004: Open sleeve - Outside pressurized area - EMI protection 10 kA - Temperature range - 65 °C to 200 °C - Product standard
Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 104: Semi-rigid polyvinylidene fluoride (PDVF) - Operating temperature - 55 °C to 175 °C - Product Standard
Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 008: Self-wrapping shielded (EMI) protective sleeve with nickel copper braid, flexible post installation operating temperature from -55 °C to 200 °C - Product standard
Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 303: Resistance to fluids
Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 503: Temperature rise due to rated current injected on the sleeve
Electronic fee collection - Evaluation of equipment for conformity to ISO 17575-1 - Part 1: Test suite structure and test purposes (ISO 16407-1:2017)
Electronic fee collection - Evaluation of equipment for conformity to ISO 17575-3 - Part 1: Test suite structure and test purposes (ISO 16410-1:2017)
Electronic fee collection - Interface definition for on-board account using integrated circuit card (ICC) (ISO 25110:2017)
Standarde europene propuse a se adopta ca standarde române
TC
CEN/TC 275
CEN/TC 327
CEN/TC 327
CEN/TC 327
CEN/TC 327
CEN/TC 327
CEN/TC 327
CEN/TC 327
CEN/TC 327
CEN/TC 260
CEN/SS C01
CEN/SS C01
CEN/TC 338
CEN/TC 307
CEN/TC 345
CEN/TC 191
CEN/TC 191
CEN/TC 191
CEN/TC 191
CEN/TC 191
CEN/TC 191
CEN/TC 191
CEN/TC 191
CEN/TC 127
CEN/TC 127
CEN/TC 127
CEN/TC 127
CEN/TC 164
CEN/TC 164
CEN/TC 164
CEN/TC 164
CEN/TC 230
CEN/TC 230
CEN/TC 164
CEN/TC 230
CEN/TC 346
CEN/TC 346
CLC/SR 103
ERM TG28
ERM TG28
ERM TGAERO
ERM TG28
ATTM
ATTM
ATTM
ATTM
ATTM
CLC/TC 210
CLC/TC 86A
CLC/TC 86A
CLC/TC 86A
CLC/TC 86A
CLC/TC 86A
CLC/TC 86A
CLC/TC 86A
CLC/TC 86A
CLC/SR 86C
CLC/SR 86
CLC/TC 86BXA
CLC/SR 86C
CLC/SR 86C
CLC/SR 86C
CLC/SR 86C
CLC/SR 86
CEN/TC 224
CEN/TC 224
CEN/TC 224
CLC/TC 205
CLC/TC 205
CLC/TC 215
CLC/TC 205
DECT
DECT
DECT
DECT
DECT
DECT
DECT
DECT
DECT
TCCE 3
BRAN
SPS 5
SPS 5
SPS 5
SPS 5
SPS 5
SPS 5
SPAN 13
SPAN 13
SPAN 13
SPS 5
SPS 5
SPS 2
SPS 3
SPS 9
SPS 3
SPS 2
SPS 2
SMG 3
SMG 3
SMG 3
SMG 3
SMG 3
SMG 3
SMG 3
SMG 4
SMG 4
SMG 3
SMG 3
SMG 3
SMG 3
SMG 3
SMG 3
SMG 3
SMG 3
SMG 3
SMG 3
SMG 3
SMG 2
SMG 11
SMG 11
SMG 11
SMG 11
SMG 11
SMG 11
SMG 11
SMG 11
SMG 11
SMG 11
SMG 11
SMG 11
SMG 11
SMG 11
3GPP CN
SMG 4
SMG 4
SMG 9
SMG 2
SES
CLC/TC 106X
CLC/TC 106X
CLC/TC 106X
CLC/TC 106X
CEN/TC 251
CEN/TC 251
CEN/TC 251
CEN/TC 251
CEN/TC 251
CLC/TC 209
CLC/TC 209
CLC/TC 100X
CLC/TC 100X
CLC/SR 100
CLC/SR 100
CLC/SR 100
CLC/TC 100X
CLC/SR 100
CLC/SR 100
CLC/SR 100
CLC/SR 100
CEN/TC 331
CEN/TC 331
CEN/TC 51
CEN/TC 254
CEN/TC 88
CEN/TC 351
CEN/TC 246
CEN/TC 246
CLC/TC 64
CLC/TC 64
CLC/TC 64
CLC/TC 64
CLC/TC 64
CLC/TC 64
CLC/TC 64
CLC/TC 64
CLC/TC 64
CLC/TC 64
CLC/TC 64
CLC/TC 64
CLC/TC 64
CLC/TC 64
CLC/TC 64
CLC/TC 64
CLC/TC 64
CLC/TC 64
CLC/TC 64
CEN/TC 165
CEN/TC 165
CEN/TC 226
CEN/TC 226
CEN/TC 226
CEN/TC 227
CEN/TC 227
CEN/TC 227
CEN/TC 336
CEN/TC 336
CEN/TC 336
CEN/TC 336
CEN/TC 169
CEN/TC 126
CEN/TC 126
CEN/TC 126
CEN/TC 126
CEN/TC 126
CEN/TC 126
CEN/TC 126
CEN/TC 126
CEN/TC 126
CEN/TC 126
CEN/TC 89
CEN/TC 156
CEN/TC 312
CEN/TC 33
CEN/TC 33
CEN/TC 33
CEN/TC 104
CEN/TC 134
CEN/TC 349
CEN/TC 350
CEN/TC 442
CEN/TC 250
CEN/TC 250
CEN/TC 250
CEN/TC 250
CLC/TC 81X
CLC/TC 81X
CEN/TC 341
CEN/TC 341
CEN/TC 341
CEN/TC 341
CEN/TC 341
CEN/TC 341
CLC/SR 3
CLC/SR 3D
CLC/SR 3
CLC/SR 3D
CLC/TC 14
CLC/TC 14
CLC/SR 15
CLC/SR 15
CLC/SR 15
CLC/SR 15
CLC/TC 17AC
CLC/TC 17AC
CLC/TC 17AC
CLC/TC 38
CLC/TC 121A
CLC/TC 121A
CLC/TC 121A
CLC/TC 23BX
CLC/TC 23BX
CLC/TC 23E
CLC/TC 36A
CLC/TC 36A
CEN/TC 430
CEN/TC 430
CEN/TC 430
CEN/TC 430
CEN/TC 430
CEN/TC 430
CEN/TC 430
CEN/TC 430
CEN/TC 430
CEN/TC 430
CEN/TC 430
CEN/TC 430
CEN/TC 430
CEN/TC 430
CEN/TC 430
CEN/TC 430
CLC/TC 45AX
CLC/TC 45B
CLC/TC 45AX
CLC/SR 47E
CLC/SR 47E
CLC/SR 47
CLC/SR 47
CLC/SR 47
CLC/SR 49
CLC/SR 49
CLC/SR 49
CLC/TC 111X
CLC/TC 111X
CLC/SR 104
CLC/TC 111X
CLC/TC 55
CLC/TC 55
CLC/TC 55
CLC/TC 55
CLC/TC 55
CLC/TC 55
CLC/TC 65X
CLC/TC 65X
CLC/TC 65X
CLC/TC 65X
CLC/TC 65X
CLC/TC 65X
CLC/TC 65X
CLC/TC 65X
CLC/TC 65X
CLC/TC 65X
CLC/TC 65X
CLC/TC 65X
CLC/TC 65X
CLC/TC 65X
CLC/TC 65X
CLC/TC 65X
CLC/TC 65X
CLC/TC 65X
CLC/TC 65X
CLC/TC 65X
CLC/TC 65X
CLC/TC 65X
CLC/TC 65X
CLC/TC 65X
CLC/TC 65X
CLC/TC 65X
CLC/SR 29
CLC/SR 29
CLC/SR 29
CLC/SR 29
CLC/SR 87
CLC/SR 29
CLC/SR 87
CLC/SR 29
CLC/TC 79
CLC/TC 79
CLC/TC 79
CLC/TC 79
CLC/TC 79
CLC/TC 79
CLC/TC 210
CLC/TC 210
CLC/TC 210
CLC/TC 210
CLC/TC 210
CLC/TC 210
CLC/SR 27
CLC/SR 89
CLC/SR 90
CLC/TC 82
CLC/TC 82
CLC/TC 82
CLC/TC 88
CLC/TC 88
CLC/TC 82
CLC/TC 82
CLC/TC 82
CLC/TC 82
CLC/TC 82
CLC/TC 82
CLC/TC 22X
CLC/TC 22X
CLC/TC 22X
CLC/TC 22X
CLC/TC 22X
CEN/TC 240
CEN/TC 240
CEN/TC 121
CEN/TC 121
CEN/TC 121
CEN/TC 121
CEN/TC 121
CEN/TC 121
CEN/TC 121
CEN/TC 121
CEN/TC 121
CEN/TC 121
CEN/TC 121
CEN/TC 121
CEN/TC 121
CEN/TC 121
CEN/TC 121
CEN/TC 121
CEN/TC 121
CEN/TC 240
CEN/TC 121
CEN/TC 121
CEN/TC 121
CEN/TC 121
CEN/TC 138
CEN/TC 138
CEN/TC 138
CEN/TC 138
ECISS/TC 101
ECISS/TC 101
CEN/SS M11
CEN/SS M11
CEN/SS M11
CEN/SS M11
CEN/TC 190
CEN/TC 190
CEN/TC 190
CEN/TC 190
CEN/SS F01
CEN/SS F01
CEN/SS F01
CEN/SS F01
CEN/SS F01
CEN/SS F20
CEN/TC 290
CEN/TC 290
CEN/TC 290
CEN/TC 185
CEN/TC 136
CEN/TC 136
CEN/TC 136
CEN/TC 136
CEN/TC 136
CEN/TC 136
CEN/TC 136
CEN/TC 136
CEN/TC 136
CEN/TC 136
CEN/TC 136
CEN/TC 136
CEN/TC 136
CEN/TC 136
CEN/TC 136
CEN/TC 136
CEN/TC 136
CEN/TC 136
CEN/TC 136
CEN/TC 136
CEN/TC 136
CEN/TC 136
CEN/TC 136
CEN/TC 136
CEN/TC 144
CEN/TC 245
CEN/TC 245
CEN/TC 245
CEN/TC 301
CEN/TC 333
CEN/TC 301
CEN/TC 242
CEN/TC 93
CEN/TC 69
CEN/TC 69
CEN/TC 69
CEN/TC 289
CEN/TC 309
CEN/TC 289
CEN/TC 248
CEN/TC 248
CEN/TC 248
CEN/TC 248
CEN/TC 248
CEN/TC 248
CEN/TC 248
CEN/TC 248
CEN/TC 248
CEN/TC 248
CEN/TC 248
CEN/TC 248
CEN/TC 248
CEN/TC 260
CEN/TC 260
CEN/TC 260
CEN/TC 260
CEN/TC 260
CEN/TC 260
CEN/TC 243
CEN/TC 243
CEN/TC 249
CEN/TC 249
CEN/TC 249
CEN/TC 249
CEN/TC 249
CEN/TC 249
CEN/TC 249
CEN/TC 155
CEN/TC 218
CEN/TC 155
CEN/TC 155
CEN/TC 155
CEN/TC 155
CEN/TC 155
CEN/TC 218
CEN/TC 155
CEN/TC 249
CEN/TC 249
CEN/TC 218
CEN/TC 218
CEN/TC 218
CEN/TC 155
CEN/TC 155
CEN/TC 155
CEN/TC 155
CEN/TC 155
CEN/TC 155
CEN/TC 155
CEN/TC 249
CEN/TC 155
CEN/TC 155
CEN/TC 155
CEN/TC 155
CEN/TC 155
CEN/TC 155
CEN/TC 155
CEN/TC 249
CEN/TC 249
CEN/TC 249
CEN/TC 249
CEN/TC 249
CEN/TC 249
CEN/TC 249
CEN/TC 249
CEN/TC 249
CEN/TC 249
CEN/TC 249
CEN/TC 249
CEN/TC 249
CEN/TC 249
CEN/TC 249
CEN/TC 218
CEN/TC 318
CEN/TC 237
CEN/TC 142
CEN/TC 142
CEN/TC 207
CEN/TC 175
CEN/TC 175
CEN/TC 175
CEN/TC 175
CEN/TC 207
CEN/TC 175
CEN/TC 184
CEN/TC 52
CEN/TC 52
CEN/TC 52
CEN/TC 52
CEN/TC 52
CLC/SR 94
CLC/SR 94
CLC/TC 26B
CLC/TC 34
CLC/TC 34
CLC/TC 34
CLC/TC 34
CLC/TC 34
CLC/TC 34
CLC/TC 34
CLC/TC 34
CLC/TC 34
CLC/TC 34
CLC/TC 34
CLC/TC 34
CLC/TC 34
CLC/TC 34
CLC/TC 34
CLC/TC 34
CLC/TC 34
CLC/TC 34
CLC/TC 34
CLC/TC 34
CLC/TC 34
CLC/TC 34
CLC/TC 34
CLC/TC 34
CLC/TC 34
CLC/TC 34
CLC/TC 34
CLC/SR 4
CLC/SR 40
CLC/TC 40XA
CLC/TC 57
CLC/TC 57
CLC/TC 57
CLC/TC 57
CLC/TC 57
CLC/TC 57
CEN/TC 319
CEN/TC 319
CLC/SR 46F
CLC/SR 48B
CLC/SR 48B
CLC/SR 46F
CLC/SR 48D
CEN/TC 113
CEN/TC 113
CEN/TC 182
CEN/TC 44
CEN/TC 54
CEN/TC 262
CEN/TC 262
CEN/TC 262
CEN/TC 219
CEN/TC 262
CEN/TC 219
CEN/TC 262
CEN/TC 262
CEN/TC 262
CLC/TC 20
CLC/TC 20
CLC/TC 20
CLC/TC 20
CLC/TC 20
CLC/TC 20
CLC/TC 20
CLC/TC 20
CLC/TC 20
CLC/TC 20
CLC/SR 105
CLC/SR 105
CLC/TC 13
CLC/TC 13
CLC/TC 13
CLC/TC 13
CLC/TC 13
CLC/TC 13
CLC/TC 11
CLC/TC 11
CLC/TC 11
CLC/TC 85X
CLC/TC 85X
CLC/TC 85X
CLC/TC 85X
CEN/TC 12
CEN/TC 12
CEN/TC 12
CEN/TC 12
CEN/TC 12
CEN/TC 12
CEN/TC 12
CEN/TC 12
CEN/TC 133
CEN/TC 132
CEN/TC 132
CEN/TC 132
CEN/TC 132
ECISS/TC 106
ECISS/TC 106
ECISS/TC 106
ECISS/TC 106
ECISS/TC 106
CLC/SR 91
CLC/SR 91
CLC/SR 91
CLC/SR 91
CLC/SR 91
CLC/SR 91
ECISS/TC 110
ECISS/TC 110
CEN/TC 151
CEN/TC 172
CEN/TC 57
CEN/TC 57
CEN/TC 57
CEN/TC 170
CEN/TC 170
CEN/TC 170
CEN/TC 170
CEN/TC 170
CEN/TC 170
CEN/TC 170
CEN/TC 170
CEN/TC 170
CEN/TC 170
CEN/TC 23
CEN/TC 23
CEN/TC 23
CEN/TC 23
CEN/TC 23
CEN/TC 23
CLC/TC 59X
CLC/TC 59X
CLC/TC 59X
CLC/TC 61
CLC/TC 61
CEN/TC 261
CEN/TC 296
CEN/TC 296
CEN/TC 119
CEN/TC 216
CEN/TC 392
CEN/TC 281
CLC/SR 37
CLC/BTTF 146-1
CEN/TC 19
CEN/TC 19
CEN/TC 19
CEN/TC 19
CEN/TC 19
CEN/TC 19
CEN/TC 19
CEN/TC 19
CEN/TC 19
CEN/TC 19
CEN/TC 19
CEN/TC 134
CEN/TC 134
CEN/TC 134
CEN/TC 134
CEN/TC 134
CEN/TC 263
CEN/TC 193
CEN/TC 193
CEN/TC 193
CEN/TC 298
CEN/TC 298
CEN/TC 139
CEN/TC 139
CEN/TC 139
CEN/TC 139
CEN/TC 139
CEN/TC 139
CEN/TC 139
CEN/TC 139
CEN/TC 139
CEN/TC 139
CEN/TC 139
CEN/TC 139
CEN/TC 139
CEN/TC 139
CEN/TC 139
CEN/TC 139
CEN/TC 298
CEN/TC 298
CEN/TC 139
CEN/TC 298
CEN/TC 298
CEN/TC 298
CEN/SS N21
CEN/SS A07
CEN/SS A99
CEN/SS A99
CEN/SS A07
CEN/CLC/JTC 1
CLC/TC 100X
CEN/TC 287
CEN/TC 287
CEN/TC 264
CEN/TC 264
CEN/SS S26
CEN/TC 444
CEN/TC 411
CEN/TC 444
CEN/TC 444
CEN/TC 444
CEN/TC 122
CEN/TC 122
CEN/TC 122
CEN/TC 122
CEN/TC 122
CEN/TC 145
CEN/TC 143
CEN/TC 143
CEN/TC 136
CEN/TC 144
CEN/TC 144
CEN/TC 144
CEN/TC 144
CEN/TC 144
CEN/TC 196
CEN/TC 150
CEN/TC 147
CEN/TC 147
CEN/TC 147
CEN/TC 10
CEN/TC 142
CEN/TC 142
CEN/TC 142
CEN/TC 142
CEN/TC 142
CEN/TC 142
CEN/TC 142
CEN/TC 305
CLC/TC 31
CLC/TC 31
CLC/TC 31
CLC/TC 31
CLC/TC 78
CEN/TC 151
CEN/TC 114
CEN/TC 162
CEN/TC 160
CEN/TC 162
CEN/TC 162
CEN/TC 162
CEN/TC 161
CEN/TC 162
CEN/TC 162
CEN/TC 162
CEN/TC 162
CEN/TC 162
CEN/TC 162
CEN/TC 161
CEN/TC 161
CEN/TC 162
CEN/TC 123
CLC/TC 61
CLC/TC 61
CLC/TC 61
CLC/TC 116
CLC/TC 116
CLC/TC 116
CLC/TC 116
CLC/TC 116
CLC/TC 116
CLC/TC 116
CLC/TC 116
CLC/TC 116
CLC/TC 116
CEN/TC 211
CEN/TC 231
CEN/TC 33
CLC/TC 62
CLC/TC 62
CEN/TC 170
CEN/TC 170
CEN/TC 170
CEN/TC 170
CLC/TC 106X
CLC/TC 106X
CLC/TC 106X
CLC/TC 106X
CLC/TC 106X
CLC/TC 106X
CEN/TC 215
CEN/TC 140
CEN/TC 55
CEN/TC 205
CEN/TC 55
CEN/TC 205
CEN/TC 205
CEN/TC 206
CEN/TC 206
CEN/TC 205
CEN/TC 204
CEN/TC 55
CEN/TC 55
CEN/TC 204
CEN/TC 215
CEN/TC 55
CEN/TC 55
CEN/TC 55
CEN/TC 55
CEN/TC 55
CEN/TC 215
CLC/TC 9X
CLC/TC 9X
CLC/TC 9X
CLC/TC 9X
CLC/TC 9X
CLC/TC 9X
CLC/TC 9X
CLC/TC 9X
CLC/TC 9X
CLC/TC 9X
CLC/TC 9X
CLC/TC 9X
CLC/TC 9X
ASD-STAN/D 4
ASD-STAN/D 4
ASD-STAN/D 4
ASD-STAN/D 4
ASD-STAN/D 4
ASD-STAN/D 4
ASD-STAN/D 4
ASD-STAN/D 4/WG 5
ASD-STAN/D 4/WG 1
ASD-STAN/D 4/WG 3
ASD-STAN/D 4/WG 11
ASD-STAN/D 4/WG 1
ASD-STAN/D 3/WG 1
ASD-STAN/D 4/WG 3
ASD-STAN/D 4/WG 8
ASD-STAN/D 4/WG 8
ASD-STAN/D 4/WG 7
ASD-STAN/D 3
ASD-STAN/D 4
ASD-STAN/D 3
ASD-STAN/D 3
ASD-STAN/D 3
ASD-STAN/D 3
ASD-STAN/D 3
ASD-STAN/D 3
ASD-STAN/D 4/WG 1
ASD-STAN/D 3/WG 1
ASD-STAN/D 3/WG 2
ASD-STAN/D 3/WG 2
ASD-STAN/D 3/WG 2
ASD-STAN/D 3/WG 2
ASD-STAN/D 4/WG 6
ASD-STAN/D 4/WG 5
ASD-STAN/D 4/WG 5
ASD-STAN/D 4/WG 5
ASD-STAN/D 3/WG 2
ASD-STAN/D 6/WG 1
ASD-STAN/D 1/WG 1
ASD-STAN/D 1/WG 1
CEN/CLC/JTC 5
CEN/CLC/JTC 5
CLC/SR 80
CEN/TC 256
CEN/TC 256
CEN/TC 256
CEN/TC 256
CEN/TC 256
CEN/TC 256
CEN/TC 256
CEN/TC 256
CEN/TC 256
CEN/TC 256
CEN/TC 256
CEN/SS T01
CEN/SS T01
CEN/SS T01
CEN/SS T01
CEN/SS T01
CEN/SS T01
CEN/SS T01
CEN/SS T01
CEN/SS T01
CEN/SS T01
CEN/SS T01
CEN/SS T01
CEN/SS T01
CEN/SS T01
CEN/SS T01
CEN/SS T01
CEN/SS T01
CEN/SS T01
CEN/SS T01
CEN/SS T01
CEN/TC 15
ASD-STAN/D 2
ASD-STAN/D 2
ASD-STAN/D 2
ASD-STAN/D 2/WG 2
ASD-STAN/D 2/WG 2
ASD-STAN/D 2/WG 2
ASD-STAN/D 2/WG 2
ASD-STAN/D 2/WG 2
ASD-STAN/D 2/WG 2
ASD-STAN/D 2
ASD-STAN/D 2
ASD-STAN/D 2
ASD-STAN/D 2
ASD-STAN/D 2
ASD-STAN/D 2
ASD-STAN/D 2
ASD-STAN/D 2
ASD-STAN/D 2
ASD-STAN/D 2
ASD-STAN/D 2
ASD-STAN/D 2/WG 3
ASD-STAN/D 2/WG 3
ASD-STAN/D 2/WG 3
ASD-STAN/D 2/WG 3
ASD-STAN/D 2
ASD-STAN/D 2
ASD-STAN/D 2
ASD-STAN/D 2
ASD-STAN/D 2
ASD-STAN/D 2
CEN/TC 278
CEN/TC 278
CEN/TC 278
ASD-STAN/D 2/WG 3
ASD-STAN/D 2/WG 8
ASD-STAN/D 2/WG 8
SECTIUNEA 2
Nr crt
Minister CT Indicativ EN Titlu
1 MAI 216 EN 3-8:2006
2 MAI 216 EN 3-8:2006/AC:2007
3 MAI 216 EN 1866-2:2014
4 MCSI 30 EN 61000-6-3:2007/A1:2011
5 MCSI 164 EN 62052-21:2004
6 MCSI 164 EN 62054-11:2004
7 MCSI 164 EN 62054-21:2004
8 MCSI 218 EN 13309:2010
9 59 EN 14399-1:2015
10 59 EN 15048-1:2016
11 111 EN 13282-2:2015
12 111 EN 13915:2017
13 111 EN 14209:2017
Standarde europene armonizate propuse a se adopta ca standarde române prin publicarea versiunii române
Portable fire extinguishers - Part 8: Additional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar
Portable fire extinguishers - Part 8: Additional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar
Mobile fire extinguishers - Part 2: Requirements for the construction, pressure resistance and mechanical tests for extinguishers, with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 1866-1
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments
Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 21: Tariff and load control equipment
Electricity metering (a.c.) - Tariff and load control - Part 11: Particular requirements for electronic ripple control receivers
Electricity metering (a.c.) - Tariff and load control - Part 21: Particular requirements for time switches
Construction machinery - Electromagnetic compatibility of machines with internal power supply
MDRAPFE
High-strength structural bolting assemblies for preloading - Part 1: General requirements
MDRAPFE
Non-preloaded structural bolting assemblies - Part 1: General requirements
MDRAPFE
Hydraulic road binders - Part 2: Normal hardening hydraulic road binders - Composition, specifications and conformity criteria
MDRAPFE
Prefabricated gypsum plasterboard panels with a cellular paperboard core - Definitions, requirements and test methods
MDRAPFE
Preformed plasterboard cornices - Definitions, requirements and test methods
14 111 EN 14216:2015
15 111 EN 14353:2017
16 111 EN 14496:2017
17 111 EN 15743:2010+A1:2015
18 113 EN 490:2011+A1:2017
19 113 EN 16153:2013+A1:2015
20 122 EN 15681-2:2017
21 169 EN 13160-2:2016
22 169 EN 13160-3:2016
23 169 EN 13160-4:2016
24 169 EN 13160-5:2016
25 169 EN 13160-7:2016
26 187 EN 12368:2015 Traffic control equipment - Signal heads
27 187 EN 13108-1:2016
28 187 EN 13108-2:2016
29 187 EN 13108-3:2016
30 187 EN 13108-4:2016
MDRAPFE
Cement - Composition, specifications and conformity criteria for very low heat special cements
MDRAPFE
Metal beads and feature profiles for use with gypsum plasterboards - Definitions, requirements and test methods
MDRAPFE
Gypsum based adhesives for thermal/acoustic insulation composite panels and gypsum boards - Definitions, requirements and test methods
MDRAPFE
Supersulfated cement - Composition, specifications and conformity criteria
MDRAPFE
Concrete roofing tiles and fittings for roof covering and wall cladding - Product specifications
MDRAPFE
Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods
MDRAPFE
Glass in Building - Basic alumino silicate glass products - Part 2: Product standard
MDRAPFE
Leak detection systems - Part 2: Requirements and test/assessment methods for pressure and vacuum systems
MDRAPFE
Leak detection systems - Part 3: Requirements and test/assessment methods for liquid systems for tanks
MDRAPFE
Leak detection systems - Part 4: Requirements and test/assessment methods for sensor based leak detection systems
MDRAPFE
Leak detection systems - Part 5: Requirements and test/assessment methods for in-tank gauge systems and pressurised pipework systems
MDRAPFE
Leak detection systems - Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets
MDRAPFE
MDRAPFE
Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete
MDRAPFE
Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for Very Thin Layers (BBTM)
MDRAPFE
Bituminous mixtures - Material specifications - Part 3: Soft Asphalt
MDRAPFE
Bituminous mixtures - Material specifications - Part 4: Hot Rolled Asphalt
31 187 EN 13108-4:2016/AC:2017
32 187 EN 13108-5:2016
33 187 EN 13108-6:2016
34 187 EN 13108-7:2016
35 187 EN 13108-9:2016
36 187 EN 14388:2015 Road traffic noise reducing devices - Specifications
37 216 EN 54-12:2015
38 216 EN 54-5:2017
39 216 EN 671-2:2012
40 216 EN 12101-2:2017
41 216 EN 12101-3:2015
42 302 EN 14037-1:2016
43 302 EN ISO 16890-1:2016
44 302 EN ISO 16890-2:2016
MDRAPFE
Bituminous mixtures - Material specifications - Part 4: Hot Rolled Asphalt
MDRAPFE
Bituminous mixtures - Material specifications - Part 5: Stone Mastic Asphalt
MDRAPFE
Bituminous mixtures - Material specifications - Part 6: Mastic Asphalt
MDRAPFE
Bituminous mixtures - Material specifications - Part 7: Porous Asphalt
MDRAPFE
Bituminous mixtures - Material specifications - Part 9: Asphalt for Ultra-Thin Layer (AUTL)
MDRAPFE
MDRAPFE
Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors using an optical beam
MDRAPFE
Fire detection and fire alarm systems - Part 5: Heat detectors - Point heat detectors
MDRAPFE
Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat hose
MDRAPFE
Smoke and heat control systems - Part 2: Natural smoke and heat exhaust ventilators
MDRAPFE
Smoke and heat control systems - Part 3: Specification for powered smoke and heat control ventilators (Fans)
MDRAPFE
Free hanging heating and cooling surfaces for water with a temperature below 120°C - Part 1: Pre-fabricated ceiling mounted radiant panels for space heating - Technical specifications and requirements
MDRAPFE
Air filters for general ventilation - Part 1: Technical specifications, requirements and classification system based upon particulate matter efficiency (ePM) (ISO 16890-1:2016)
MDRAPFE
Air filters for general ventilation - Part 2: Measurement of fractional efficiency and air flow resistance (ISO 16890-2:2016)
45 302 EN ISO 16890-3:2016
46 302 EN ISO 16890-4:2016
47 318 EN 13561:2015
48 318 EN 13561:2015/AC:2016
49 318 EN 13637:2015
50 318 EN 13659:2015
51 321 EN 12602:2016
52 321 EN 16622:2015
53 324 EN 14041:2018
54 338 EN 14680:2015
55 338 EN 14814:2016
56 393 EN 16475-2:2017
57 393 EN 16475-3:2016
58 393 EN 16475-7:2016
59 393 EN 16497-1:2015
60 393 EN 16497-2:2017
61 ME 19 EN 62321-1:2013
62 ME 19 EN 62321-2:2014
63 ME 19 EN 62321-3-1:2014
64 ME 19 EN 62321-4:2014
65 ME 66 EN 15649-5:2009
MDRAPFE
Air filters for general ventilation - Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured (ISO 16890-3:2016)
MDRAPFE
Air filters for general ventilation - Part 4: Conditioning method to determine the minimum fractional test efficiency (ISO 16890-4:2016)
MDRAPFE
External blinds and awnings - Performance requirements including safety
MDRAPFE
External blinds and awnings - Performance requirements including safety
MDRAPFE
Building hardware - Electrically controlled exit systems for use on escape routes - Requirements and test methods
MDRAPFE
Shutters and external venetian blinds - Performance requirements including safety
MDRAPFE
Prefabricated reinforced components of autoclaved aerated concrete
MDRAPFE
Silica-calcium fume for concrete - Definitions, requirements and conformity criteria
MDRAPFE
Resilient, textile, laminate and modular multilayer floor coverings - Essential characteristics
MDRAPFE
Adhesives for non-pressure thermoplastics piping systems - Specifications
MDRAPFE
Adhesives for thermoplastic piping systems for fluids under pressure - Specifications
MDRAPFE
Chimneys - Accessories - Part 2: Chimney fans - Requirements and test methods
MDRAPFE
Chimneys - Accessories - Part 3: Draught regulators, standstill opening devices and combined secondary air devices - Requirements and test methods
MDRAPFE
Chimneys - Accessories - Part 7: Rain caps - Requirements and test methods
MDRAPFE
Chimneys - Concrete System Chimneys - Part 1: Non-balanced flue applications
MDRAPFE
Chimneys - Concrete System Chimneys - Part 2: Balanced flue applications
Determination of certain substances in electrotechnical products - Part 1: Introduction and overview
Determination of certain substances in electrotechnical products - Part 2: Disassembly, disjointment and mechanical sample preparation
Determination of certain substances in electrotechnical products - Part 3-1: Screening - Lead, mercury, cadmium, total chromium and total bromine by X-ray fluorescence spectrometry
Determination of certain substances in electrotechnical products - Part 4: Mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS
Floating leisure articles for use on and in the water - Part 5: Additional specific safety requirements and test methods for Class C devices
66 ME 66 EN 15649-7:2009
67 ME 89 EN 1591-1:2013
68 ME 89 EN 12516-2:2014
69 ME 109 EN 1359:2017 Gas meters - Diaphragm gas meters
70 ME 125 EN 71-1:2014
71 ME 125 EN 71-12:2016
72 ME 125 EN 71-5:2015
73 ME 131 EN 60064:1995
74 ME 131 EN 62554:2011
75 ME 161 EN 61960:2011
76 ME 374 EN ISO/IEC 17025:2017
77 MM 323 EN ISO 14044:2006/A1:2018
78 MMJS 66 EN 565:2017
79 MMJS 66 EN 566:2017
80 MMJS 77 EN ISO 5395-2:2013/A1:2016
81 MMJS 77 EN ISO 5395-2:2013/A2:2017
82 MMJS 77 EN ISO 5395-3:2013/A1:2017
83 MMJS 77 EN ISO 10517:2009/A1:2013
Floating leisure articles for use on and in the water - Part 7: Additional specific safety requirements and test methods for class E devices
Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation
Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells
Safety of toys - Part 1: Mechanical and physical properties
Safety of toys - Part 12: N-Nitrosamines and N-nitrosatable substances
Safety of toys - Part 5: Chemical toys (sets) other than experimental sets
Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements
Sample preparation for measurement of mercury level in fluorescent lamps
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications
General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2017)
Environmental management - Life cycle assessment - Requirements and guidelines - Amendment 1 (ISO 14044:2006/Amd 1:2017)
Mountaineering equipment - Tape - Safety requirements and test methods
Mountaineering equipment - Slings - Safety requirements and test methods
Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 2: Pedestrian-controlled lawnmowers - Amendment 1: OPC, cutting means, pressurized hoses (ISO 5395-2:2013/Amd 1:2016)
Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 2: Pedestrian-controlled lawnmowers - Amendment 2: Cutting-means-enclosure guards (ISO 5395-2:2013/Amd 2:2017)
Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 3: Ride-on lawnmowers with seated operator - Amendment 1: OPC, Parking brake, ROPS, pressurized hoses, cutting means, grass catcher and test probe (ISO 5395-3:2013/Amd 1:2017, Corrected version 2017-03)
Powered hand-held hedge trimmers - Safety (ISO 10517:2009/Amd 1:2013)
84 MMJS 77 EN ISO 11681-2:2011/A1:2017
85 MMJS 77 EN ISO 11806-2:2011
86 MMJS 77 EN ISO 11850:2011/A1:2016
87 MMJS 77 EN ISO 19932-1:2013
88 MMJS 218 EN 474-5:2006+A3:2013
89 MMJS 223 EN ISO 14122-1:2016
90 MMJS 227 EN 374-2:2014
91 MMJS 227 EN ISO 374-1:2016
92 MMJS 227 EN ISO 374-5:2016
93 MMJS 227 EN 388:2016 Protective gloves against mechanical risks94 MMJS 227 EN ISO 9151:2016
95 MMJS 227 EN 13911:2017
96 MMJS 227 EN 16689:2017
97 MMJS 227 EN ISO 20349-1:2017
98 MMJS 227 EN ISO 20349-2:2017
99 MMJS 227 EN ISO 20471:2013/A1:2016
100 MMJS 358 EN 16263-2:2015
101 MMJS 358 EN 16263-5:2015
Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:2011/Amd 1:2017)
Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 2: Machines for use with back-pack power unit (ISO 11806-2:2011)
Machinery for forestry - General safety requirements (ISO 11850:2011/Amd 1:2016)
Equipment for crop protection - Knapsack sprayers - Part 1: Safety and environmental requirements (ISO 19932-1:2013)
Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators
Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means and general requirements of access (ISO 14122-1:2016)
Protective gloves against dangerous chemicals and micro-organisms - Part 2: Determination of resistance to penetration
Protective gloves against dangerous chemicals and micro-organisms - Part 1: Terminology and performance requirements for chemical risks (ISO 374-1:2016)
Protective gloves against dangerous chemicals and micro-organisms - Part 5: Terminology and performance requirements for micro-organisms risks (ISO 374-5:2016)
Protective clothing against heat and flame - Determination of heat transmission on exposure to flame (ISO 9151:2016, Corrected version 2017-03)
Protective clothing for firefighters - Requirements and test methods for fire hoods for firefighters
Protective clothing for firefighters - Performance requirements for protective clothing for technical rescue
Personal protective equipment - Footwear protecting against risks in foundries and welding - Part 1: Requirements and test methods for protection against risks in foundries (ISO 20349-1:2017)
Personal protective equipment - Footwear protecting against risks in foundries and welding - Part 2: Requirements and test methods for protection against risks in welding and allied processes (ISO 20349-2:2017)
High visibility clothing - Test methods and requirements - Amendment 1 (ISO 20471:2013/Amd 1:2016)
Pyrotechnic articles - Other pyrotechnic articles - Part 2: Requirements
Pyrotechnic articles - Other pyrotechnic articles - Part 5: Minimum labelling requirements and instructions for use
102 MS 22 EN 60601-1-3:2008/A11:2016
103 MS 22 EN 60601-1-6:2010
104 MS 22 EN 60601-1-8:2007/A11:2017
105 MS 22 EN 60601-2-28:2010
106 MS 22 EN 60601-2-33:2010/A12:2016
107 MS 377 EN ISO 7197:2009
108 MS 377 EN ISO 7376:2009
109 MS 377 EN ISO 7886-4:2009
110 MS 377 EN ISO 10535:2006
111 MS 377 EN ISO 10993-11:2009
112 MS 377 EN ISO 10993-12:2012
113 MS 377 EN ISO 10993-14:2009
114 MS 377 EN ISO 10993-15:2009
115 MS 377 EN ISO 10993-17:2009
116 MS 377 EN ISO 10993-18:2009
117 MS 377 EN ISO 10993-3:2014
118 MS 377 EN ISO 10993-5:2009
119 MS 377 EN ISO 10993-9:2009
Medical electrical equipment - Part 1-3: General requirements for basic safety and essential performance - Collateral Standard: Radiation protection in diagnostic X-ray equipment
Medical electrical equipment - Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability
Medical electrical equipment - Part 1-8: General requirements for basic safety and essential performance - Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems
Medical electrical equipment - Part 2-28: Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis
Medical electrical equipment - Part 2-33: Particular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis
Neurosurgical implants - Sterile, single-use hydrocephalus shunts and components (ISO 7197:2006, including Cor 1:2007)
Anaesthetic and respiratory equipment - Laryngoscopes for tracheal intubation (ISO 7376:2009)
Sterile hypodermic syringes for single use - Part 4: Syringes with re-use prevention feature (ISO 7886-4:2006)
Hoists for the transfer of disabled persons - Requirements and test methods (ISO 10535:2006)
Biological evaluation of medical devices - Part 11: Tests for systemic toxicity (ISO 10993-11:2006)
Biological evaluation of medical devices - Part 12: Sample preparation and reference materials (ISO 10993-12:2012)
Biological evaluation of medical devices - Part 14: Identification and quantification of degradation products from ceramics (ISO 10993-14:2001)
Biological evaluation of medical devices - Part 15: Identification and quantification of degradation products from metals and alloys (ISO 10993-15:2000)
Biological evaluation of medical devices - Part 17: Establishment of allowable limits for leachable substances (ISO 10993-17:2002)
Biological evaluation of medical devices - Part 18: Chemical characterization of materials (ISO 10993-18:2005)
Biological evaluation of medical devices - Part 3: Tests for genotoxicity, carcinogenicity and reproductive toxicity (ISO 10993-3:2014)
Biological evaluation of medical devices - Part 5: Tests for in vitro cytotoxicity (ISO 10993-5:2009)
Biological evaluation of medical devices - Part 9: Framework for identification and quantification of potential degradation products (ISO 10993-9:2009)
120 MS 377 EN ISO 11137-1:2015
121 MT 143 EN 60092-507:2015 Electrical installations in ships - Part 507 - Small vessels
122 MT 146 EN 13129:2016
123 MT 146 EN 13230-1:2016
124 MT 146 EN 13230-2:2016
125 MT 146 EN 13230-3:2016
126 MT 146 EN 13674-1:2011+A1:2017
127 MT 146 EN 14033-1:2017
128 MT 146 EN 14531-1:2015
129 MT 146 EN 14531-2:2015
130 MT 146 EN 14535-3:2015
131 MT 146 EN 15220:2016 Railway applications - Brake indicators
132 MT 146 EN 15313:2016
133 MT 146 EN 15528:2015
134 MT 146 EN 15551:2017 Railway applications - Railway rolling stock - Buffers
135 MT 146 EN 16186-3:2016
136 MT 146 EN 16584-1:2017
137 MT 146 EN 16584-2:2017
138 MT 146 EN 16584-3:2017
Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11137-1:2006, including Amd 1:2013)
Railway applications - Air conditioning for main line rolling stock - Comfort parameters and type tests
Railway applications - Track - Concrete sleepers and bearers - Part 1: General requirements
Railway applications - Track - Concrete sleepers and bearers - Part 2: Prestressed monoblock sleepers
Railway applications - Track - Concrete sleepers and bearers - Part 3: Twin-block reinforced sleepers
Railway applications - Track - Rail - Part 1: Vignole railway rails 46 kg/m and above
Railway applications - Track - Railbound construction and maintenance machines - Part 1: Technical requirements for running
Railway applications - Methods for calculation of stopping and slowing distances and immobilization braking - Part 1: General algorithms utilizing mean value calculation for train sets or single vehicles
Railway applications - Methods for calculation of stopping and slowing distances and immobilization braking - Part 2: Step by step calculations for train sets or single vehicles
Railway applications - Brake discs for railway rolling stock - Part 3: Brake discs, performance of the disc and the friction couple, classification
Railway applications - In-service wheelset operation requirements - In-service and off-vehicle wheelset maintenance
Railway applications - Line categories for managing the interface between load limits of vehicles and infrastructure
Railway applications - Driver's cab - Part 3: Design of displays
Railway applications - Design for PRM use - General requirements - Part 1: Contrast
Railway applications - Design for PRM use - General requirements - Part 2: Information
Railway applications - Design for PRM use - General requirements - Part 3: Optical and friction characteristics
139 MT 146 EN 16585-1:2017
140 MT 146 EN 16585-2:2017
141 MT 146 EN 16585-3:2017
142 MT 146 EN 16586-1:2017
143 MT 146 EN 16586-2:2017
144 MT 146 EN 16587:2017
145 MT 146 EN 16683:2015
146 MT 146 EN 16729-1:2016
147 MT 199 EN ISO 8665:2017
148 MT 199 EN ISO 8846:2017
149 MT 199 EN ISO 8847:2017
Railway applications - Design for PRM use - Equipment and components onboard rolling stock - Part 1: Toilets
Railway applications - Design for PRM use - Equipment and components on board rolling stock - Part 2: Elements for sitting, standing and moving
Railway applications - Design for PRM use - Equipment and components on board rolling stock - Part 3: Clearways and internal doors
Railway applications - Design for PRM use - Accessibility of persons with reduced mobility to rolling stock - Part 1: Steps for access and egress
Railway applications - Design for PRM use - Accessibility of persons with reduced mobility to rolling stock - Part 2: Boarding aids
Railway applications - Design for PRM Use - Requirements on obstacle free routes for infrastructure
Railway applications - Call for aid and communication device - Requirements
Railway applications - Infrastructure - Non-destructive testing on rails in track - Part 1: Requirements for ultrasonic inspection and evaluation principles
Small craft - Marine propulsion reciprocating internal combustion engines - Power measurements and declarations (ISO 8665:2006)
Small craft - Electrical devices - Protection against ignition of surrounding flammable gases (ISO 8846:1990)
Small craft - Steering gear - Cable and pulley systems (ISO 8847:2004)
150 MT 199 EN ISO 8848:2017 Small craft - Remote steering systems (ISO 8848:1990)
151 MT 199 EN ISO 9094:2017 Small craft - Fire protection (ISO 9094:2015)
152 MT 199 EN ISO 9097:2017 Small craft - Electric fans (ISO 9097:1991)
153 MT 199 EN ISO 9775:2017
154 MT 199 EN ISO 10088:2017
155 MT 199 EN ISO 10133:2017
Small craft - Remote steering systems for single outboard motors of 15 kW to 40 kW power (ISO 9775:1990)
Small craft - Permanently installed fuel systems (ISO 10088:2013)
Small craft - Electrical systems - Extra-low-voltage d.c. installations (ISO 10133:2012)
156 MT 199 EN ISO 10239:2017
157 MT 199 EN ISO 10592:2017
158 MT 199 EN ISO 11105:2017
159 MT 199 EN ISO 11592-1:2016
160 MT 199 EN ISO 12217-1:2017
161 MT 199 EN ISO 12217-2:2017
Small craft - Liquefied petroleum gas (LPG) systems (ISO 10239:2014)
Small craft - Hydraulic steering systems (ISO 10592:1994)
Small craft - Ventilation of petrol engine and/or petrol tank compartments (ISO 11105:1997)
Small craft - Determination of maximum propulsion power rating using manoeuvring speed - Part 1: Craft with a length of hull less than 8 m (ISO 11592-1:2016)
Small craft - Stability and buoyancy assessment and categorization - Part 1: Non-sailing boats of hull length greater than or equal to 6 m (ISO 12217-1:2015)
Small craft - Stability and buoyancy assessment and categorization - Part 2: Sailing boats of hull length greater than or equal to 6 m (ISO 12217-2:2015)
162 MT 199 EN ISO 12217-3:2017
163 MT 199 EN ISO 13929:2017
164 MT 199 EN ISO 14895:2016
165 MT 199 EN ISO 15584:2017
166 MT 199 EN ISO 15652:2017
167 MT 199 EN ISO 16147:2017
Small craft - Stability and buoyancy assessment and categorization - Part 3: Boats of hull length less than 6 m (ISO 12217-3:2015)
Small craft - Steering gear - Geared link systems (ISO 13929:2001)
Small craft - Liquid-fuelled galley stoves and heating appliances (ISO 14895:2016)
Small craft - Inboard petrol engines - Engine-mounted fuel and electrical components (ISO 15584:2001)
Small craft - Remote steering systems for inboard mini jet boats (ISO 15652:2003)
Small craft - Inboard diesel engines - Engine-mounted fuel and electrical components (ISO 16147:2002, including Amd 1:2013)
168 MT 199 EN ISO 16315:2016
169 MT 199 EN ISO 18854:2015
170 MT 199 EN ISO 19009:2015
171 MT 199 EN ISO 21487:2012/A2:2015
172 UE 4 EN 50124-1:2017
173 UE 4 EN 50124-2:2017
174 UE 4 EN 50153:2014/A1:2017
175 UE 4 EN 50155:2017
176 UE 4 EN 62580-1:2016/A11:2017
177 UE 4 EN 62625-1:2013/A11:2017
178 UE 9 EN 60715:2017
179 UE 9 EN 60947-5-3:2013
180 UE 9 EN 60947-5-5:1997/A2:2017
181 UE 9 EN 62026-7:2013
182 UE 9 EN 62626-1:2014
183 UE 11 EN 60670-1:2005/A1:2013
184 UE 11 EN 61242:1997/A13:2017
Small craft - Electric propulsion system (ISO 16315:2016)
Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015)
Small craft - Electric navigation lights - Performance of LED lights (ISO 19009:2015)
Small craft - Permanently installed petrol and diesel fuel tanks - Amendment 2 (ISO 21487:2012/Amd 2:2015)
Railway applications - Insulation coordination - Part 1: Basic requirements - Clearances and creepage distances for all electrical and electronic equipment
Railway applications - Insulation coordination - Part 2: Overvoltages and related protection
Railway applications - Rolling stock - Protective provisions relating to electrical hazards
Railway applications - Rolling stock - Electronic equipment
Electronic railway equipment - On-board multimedia and telematic subsystems for railways - Part 1: General architecture
Electronic railway equipment - On board driving data recording system - Part 1: System specification
Dimensions of low-voltage switchgear and controlgear - Standardized mounting on rails for mechanical support of switchgear, controlgear and accessories
Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB)
Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function
Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 7: CompoNet
Low-voltage switchgear and controlgear enclosed equipment - Part 1: Enclosed switch-disconnectors outside the scope of IEC 60947-3 to provide isolation during repair and maintenance work
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 1: General requirements
Electrical accessories - Cable reels for household and similar purposes
185 UE 11 EN 61534-21:2014
186 UE 11 EN 61914:2016 Cable cleats for electrical installations187 UE 11 EN 62275:2015
188 UE 22 EN 60601-2-25:2015
189 UE 22 EN 60601-2-26:2015
190 UE 22 EN 82304-1:2017
191 UE 23 EN 61010-2-201:2013
192 UE 24 EN 61010-031:2015
193 UE 39 EN ISO 15614-8:2016
194 UE 39 EN ISO 15614-1:2017
195 UE 39 EN ISO 15614-7:2016
196 UE 42 EN 10207:2017
197 UE 42 EN 10213:2007+A1:2016 Steel castings for pressure purposes198 UE 42 EN 10269:2013
199 UE 42 EN 10272:2016 Stainless steel bars for pressure purposes200 UE 42 EN 10273:2016
201 UE 59 EN ISO 28881:2013
202 UE 77 EN ISO 4254-1:2015
203 UE 78 EN 15997:2011
Powertrack systems - Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting
Cable management systems - Cable ties for electrical installations
Medical electrical equipment - Part 2-25: Particular requirements for the basic safety and essential performance of electrocardiographs
Medical electrical equipment - Part 2-26: Particular requirements for the basic safety and essential performance of electroencephalographs
Health Software - Part 1: General requirements for product safety
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-201: Particular requirements for control equipment
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints (ISO 15614-8:2016)
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1:2017, Corrected version 2017-10-01)
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 7: Overlay welding (ISO 15614-7:2016)
Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
Machine tools - Safety - Electro-discharge machines (ISO 28881:2013)
Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2013)
All terrain vehicles (ATVs - Quads) - Safety requirements and test methods
204 UE 78 EN 16029:2012
205 UE 85 EN 81-20:2014
206 UE 85 EN 81-50:2014
207 UE 85 EN 12929-2:2015
208 UE 85 EN 12930:2015
209 UE 89 EN 12516-4:2014
210 UE 97 EN ISO 12863:2010/A1:2016
211 UE 105 EN 13368-2:2017
212 UE 108 EN ISO 10931:2005/A1:2015
213 UE 108 EN ISO 15493:2003/A1:2017
214 UE 108 EN ISO 15494:2015
Ride-on, motorized vehicles intended for the transportation of persons and not intended for use on public roads - Single-track two-wheel motor vehicles - Safety requirements and test methods
Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 20: Passenger and goods passenger lifts
Safety rules for the construction and installation of lifts - Examinations and tests - Part 50: Design rules, calculations, examinations and tests of lift components
Safety requirements for cableway installations designed to carry persons - General requirements - Part 2: Additional requirements for reversible bicable aerial ropeways without carrier truck brakes
Safety requirements for cableway installations designed to carry persons - Calculations
Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
Standard test method for assessing the ignition propensity of cigarettes (ISO 12863:2010/Amd 1:2016)
Fertilizers - Determination of chelating agents in fertilizers by chromatography - Part 2: Determination of Fe chelated by [o,o] EDDHA, [o,o] EDDHMA and HBED, or the amount of chelating agents, by ion pair chromatography
Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Specifications for components and the system (ISO 10931:2005/FDAM 1:2015)
Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for components and the system - Metric series - Amendment 1 (ISO 15493:2003/Amd 1:2016 + Cor 1:2004)
Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system (ISO 15494:2015)
215 UE 108 EN 15701:2016
216 UE 113 EN 492:2012+A1:2016
217 UE 113 EN 494:2012+A1:2015
218 UE 113 EN 13967:2012+A1:2017
219 UE 113 EN 15814:2011+A2:2014
220 UE 113 EN 16069:2012+A1:2015
221 UE 114 EN 997:2012+A1:2015 WC pans and WC suites with integral trap222 UE 114 EN 12004-1:2017
223 UE 114 EN 13310:2015
224 UE 114 EN 13407:2015
225 UE 114 EN 14428:2015
226 UE 114 EN 14516:2015 Baths for domestic purposes227 UE 114 EN 14527:2016 Shower trays for domestic purposes228 UE 114 EN 14528:2015 Bidets - Functional requirements and test methods229 UE 114 EN 14688:2015
230 UE 114 EN 14891:2017
231 UE 118 EN 716-1:2017
232 UE 118 EN 716-2:2017
233 UE 118 EN 13986:2004+A1:2015
234 UE 118 EN 14915:2013+A1:2017
235 UE 118 EN 14988:2017 Children's high chairs - Requirements and test methods
236 UE 118 EN 16890:2017
237 UE 137 EN 60079-28:2015
238 UE 137 EN 60079-29-1:2016
239 UE 137 EN 60079-30-1:2017
240 UE 137 EN 60079-18:2015/A1:2017
Plastics - Thermoplastic jackets for insulation products for building equipment and industrial installations - Requirements and test methods
Fibre-cement slates and fittings - Product specification and test methods
Fibre-cement profiled sheets and fittings - Product specification and test methods
Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics
Polymer modified bituminous thick coatings for waterproofing - Definitions and requirements
Thermal insulation products for buildings - Factory made products of polyethylene foam (PEF) - Specification
Adhesives for ceramic tiles - Part 1: Requirements, assessment and verification of constancy of performance, classification and marking
Kitchen sinks - Functional requirements and test methods
Wall-hung urinals - Functional requirements and test methods
Shower enclosures - Functional requirements and test methods
Sanitary appliances - Wash basins - Functional requirements and test methods
Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, assessment and verification of constancy of performance, classification and marking
Furniture - Children's cots and folding cots for domestic use - Part 1: Safety requirements
Furniture - Children's cots and folding cots for domestic use - Part 2: Test methods
Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking
Solid wood panelling and cladding - Characteristics, requirements and marking
Children's furniture - Mattresses for cots and cribs - Safety requirements and test methods
Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation
Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases
Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements
Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"
241 UE 146 EN 13481-2:2012+A1:2017
242 UE 146 EN 13481-5:2012+A1:2017
243 UE 146 EN 14033-3:2017
244 UE 146 EN 15153-1:2013+A1:2016
245 UE 146 EN 16241:2014+A1:2016 Railway applications - Slack adjuster
246 UE 159 EN 50620:2017 Electric cables - Charging cables for electric vehicles
247 UE 160 EN 50288-1:2013
248 UE 160 EN 50288-10-2:2015
249 UE 160 EN 50288-11-2:2015
250 UE 160 EN 50288-2-1:2013
251 UE 160 EN 50288-2-2:2013
252 UE 160 EN 50288-3-1:2013
253 UE 160 EN 50288-3-2:2013
254 UE 160 EN 50288-4-1:2013
255 UE 160 EN 50288-4-2:2013
Railway applications - Track - Performance requirements for fastening systems - Part 2: Fastening systems for concrete sleepers
Railway applications - Track - Performance requirements for fastening systems - Part 5: Fastening systems for slab track with rail on the surface or rail embedded in a channel
Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements
Railway applications - External visible and audible warning devices for trains - Part 1: Head, marker and tail lamps
Multi-element metallic cables used in analogue and digital communication and control - Part 1: Generic specification
Multi-element metallic cables used in analogue and digital communication and control - Part 10-2: Sectional specification for screened cables characterized from 1 MHz up to 500 MHz for work area, patch cord and data centre applications
Multi-element metallic cables used in analogue and digital communication and control - Part 11-2: Sectional specification for un-screened cables, characterized from 1 MHz up to 500 MHz for work area, patch cord and data centre applications
Multi-element metallic cables used in analogue and digital communication and control - Part 2-1: Sectional specification for screened cables characterised up to 100 MHz - Horizontal and building backbone cables
Multi-element metallic cables used in analogue and digital communication and control - Part 2-2: Sectional specification for screened cables characterised up to 100 MHz - Work area and patch cord cables
Multi-element metallic cables used in analogue and digital communication and control - Part 3-1: Sectional specification for unscreened cables characterised up to 100 MHz - Horizontal and building backbone cables
Multi-element metallic cables used in analogue and digital communication and control - Part 3-2: Sectional specification for unscreened cables characterised up to 100 MHz - Work area and patch cord cables
Multi-element metallic cables used in analogue and digital communication and control - Part 4-1: Sectional specification for screened cables characterised up to 600 MHz - Horizontal and building backbone cables
Multi-element metallic cables used in analogue and digital communication and control - Part 4-2: Sectional specification for screened cables characterised up to 600 MHz - Work area and patch cord cables
256 UE 160 EN 50288-5-1:2013
257 UE 160 EN 50288-5-2:2013
258 UE 160 EN 50288-6-1:2013
259 UE 160 EN 50288-6-2:2013
260 UE 169 EN 13480-2:2017 Metallic industrial piping - Part 2: Materials
261 UE 169 EN 13480-4:2017
262 UE 176 EN 50321-1:2018
263 UE 186 EN 12566-7:2016
264 UE 202 EN 10216-1:2013
265 UE 202 EN 10216-2:2013
266 UE 202 EN 10216-3:2013
267 UE 202 EN 10216-4:2013
268 UE 202 EN 10216-5:2013
269 UE 202 EN 10305-6:2016
270 UE 225 EN 303-5:2012
271 UE 225 EN 13203-2:2015
272 UE 225 EN 13278:2013 Open fronted gas-fired independent space heaters
273 UE 225 EN 15502-1:2012+A1:2015
Multi-element metallic cables used in analogue and digital communication and control - Part 5-1: Sectional specification for screened cables characterized up to 250 MHz - Horizontal and building backbone cables
Multi-element metallic cables used in analogue and digital communication and control - Part 5-2: Sectional specification for screened cables characterized up to 250 MHz - Work area and patch cord cables
Multi-element metallic cables used in analogue and digital communication and control - Part 6-1: Sectional specification for unscreened cables characterised up to 250 MHz - Horizontal and building backbone cables
Multi-element metallic cables used in analogue and digital communication and control - Part 6-2: Sectional specification for unscreened cables characterised up to 250 MHz - Work area and patch cord cables
Metallic industrial piping - Part 4: Fabrication and installation
Live working - Footwear for electrical protection - Insulating footwear and overboots
Small wastewater treatment systems for up to 50 PT - Part 7: Prefabricated tertiary treatment units
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems
Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking
Gas-fired domestic appliances producing hot water - Part 2: Assessment of energy consumption
Gas-fired heating boilers - Part 1: General requirements and tests
274 UE 225 EN 15502-2-1:2012+A1:2016
275 UE 238 EN 50229:2015
276 UE 238 EN 60312-1:2017
277 UE 238 EN 60350-1:2016
278 UE 238 EN 60456:2016
279 UE 238 EN 60730-2-5:2015
280 UE 239 EN 50569:2013
281 UE 239 EN 50570:2013
282 UE 239 EN 50570:2013/A1:2018
283 UE 239 EN 50571:2013
284 UE 239 EN 50571:2013/A1:2018
285 UE 239 EN 60335-1:2012/A13:2017
286 UE 239 EN 60335-2-103:2015
287 UE 239 EN 60335-2-3:2016
288 UE 239 EN 60335-2-31:2014
289 UE 239 EN 60335-2-5:2015
290 UE 239 EN 60335-2-58:2005/A12:2016
291 UE 239 EN 60335-2-58:2005/A2:2015
292 UE 239 EN 60335-2-6:2015
293 UE 239 EN 60335-2-95:2015
Gas-fired central heating boilers - Part 2-1: Specific standard for type C appliances and type B2, B3 and B5 appliances of a nominal heat input not exceeding 1 000 kW
Electric clothes washer-dryers for household use - Methods of measuring the performance
Vacuum cleaners for household use - Part 1: Dry vacuum cleaners - Methods for measuring the performance
Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills - Methods for measuring Performance
Clothes washing machines for household use - Methods for measuring the performance
Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems
Household and similar electrical appliances - Safety - Particular requirements for commercial electric spin extractors
Household and similar electrical appliances - Safety - Particular requirements for commercial electric tumble dryers
Household and similar electrical appliances - Safety - Particular requirements for commercial electric tumble dryers
Household and similar electrical appliances - Safety - Particular requirements for commercial electric washing machines
Household and similar electrical appliances - Safety - Particular requirements for commercial electric washing machines
Household and similar electrical appliances - Safety - Part 1: General requirements
Household and similar electrical appliances - Safety - Part 2-103: Particular requirements for drives for gates, doors and windows
Household and similar electrical appliances - Safety - Part 2-3: Particular requirements for electric irons
Household and similar electrical appliances - Safety - Part 2-31: Particular requirements for range hoods and other cooking fume extractors
Household and similar electrical appliances - Safety - Part 2-5: Particular requirements for dishwashers
Household and similar electrical appliances - Safety - Part 2-58: Particular requirements for commercial electric dishwashing machines
Household and similar electrical appliances - Safety - Part 2-58: Particular requirements for commercial electric dishwashing machines
Household and similar electrical appliances - Safety - Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances
Household and similar electrical appliances - Safety - Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use
294 UE 255 EN 62841-1:2015
295 UE 255 EN 62841-2-10:2017
296 UE 318 EN 13120:2009+A1:2014
297 UE 318 EN 13120:2009+A1:2014/AC:2015
298 UE 326 EN 14081-1:2016
299 UE 333 EN 61851-23:2014
300 UE 333 EN 61851-23:2014/AC:2016-06
301 UE 333 EN 61851-24:2014
302 UE 335 EN 15651-1:2017
303 UE 335 EN 15651-2:2017
304 UE 335 EN 15651-3:2017
305 UE 335 EN 15651-4:2017
306 UE 335 EN 15651-4:2017/AC:2017
307 UE 338 EN 12878:2014
308 UE 338 EN 15274:2015
309 UE 338 EN 15275:2015
310 UE 347 EN 998-1:2016
311 UE 347 EN 998-2:2016
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 1: General requirements
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-10: Particular requirements for hand-held mixers
Internal blinds - Performance requirements including safety
Internal blinds - Performance requirements including safety
Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements
Electric vehicle conductive charging system - Part 23: DC electric vehicle charging station
Electric vehicle conductive charging system - Part 23: DC electric vehicle charging station
Electric vehicle conductive charging system - Part 24: Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 1: Sealants for facade elements
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 2: Sealants for glazing
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 3: Sealants for sanitary joints
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 4: Sealants for pedestrian walkways
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 4: Sealants for pedestrian walkways
Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test
General purpose adhesives for structural assembly - Requirements and test methods
Structural adhesives - Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures
Specification for mortar for masonry - Part 1: Rendering and plastering mortar
Specification for mortar for masonry - Part 2: Masonry mortar
312 UE 347 EN 15824:2017
313 UE 364 EN 13361:2018
314 UE 364 EN 13362:2018
315 UE 364 EN 13491:2018
316 UE 364 EN 13492:2018
317 UE 364 EN 13493:2018
318 UE 364 EN 15382:2018
319 UE 364 EN 16993:2018
320 UE 364 EN 16994:2018
321 UE 375 EN 60950-1:2006/A2:2013
322 UE 375 EN 62623:2013
323 UE 377 EN 556-2:2015
324 UE 377 EN 1865-1:2010+A1:2015
325 UE 377 EN 1865-4:2012
326 UE 377 EN 1865-5:2012
327 UE 377 EN 1865-2:2010+A1:2015
328 UE 377 EN ISO 9170-2:2008
329 UE 377 EN ISO 10524-1:2006
330 UE 377 EN ISO 10524-2:2006
331 UE 377 EN ISO 10524-3:2006
Specifications for external renders and internal plasters based on organic binders
Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams
Geosynthetic Barriers - Characteristics required for use in the construction of canals
Geosynthetic barriers - Characteristics required for use in the construction of tunnels and associated underground structures
Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment
Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites
Geosynthetic barriers - Characteristics required for use in transportation infrastructure
Geosynthetic barriers - Characteristics required for use in the construction of storage lagoons, secondary containment (above and below ground) and other containment applications for chemicals, polluted water and produced liquids
Clay Geosynthetic Barriers - Characteristics required for use in the construction of underground structures (other than tunnels and associated structures)
Information technology equipment - Safety - Part 1: General requirements
Desktop and notebook computers - Measurement of energy consumption
Sterilization of medical devices - Requirements for medical devices to be designated ''STERILE" - Part 2: Requirements for aseptically processed medical devices
Patient handling equipment used in road ambulances - Part 1: General stretcher systems and patient handling equipment
Patient handling equipment used in road ambulances - Part 4: Foldable patient transfer chair
Patient handling equipment used in road ambulances - Part 5: Stretcher support
Patient handling equipment used in road ambulances - Part 2: Power assisted stretcher
Terminal units for medical gas pipeline systems - Part 2: Terminal units for anaesthetic gas scavenging systems (ISO 9170-2:2008)
Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices (ISO 10524-1:2006)
Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators (ISO 10524-2:2005)
Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves (ISO 10524-3:2005)
332 UE 377 EN ISO 10524-3:2006/A1:2013
333 UE 377 EN ISO 10524-4:2008
334 UE 377 EN ISO 10651-4:2009
335 UE 377 EN ISO 10651-6:2009
336 UE 377 EN 14683:2014 Medical face masks - Requirements and test methods
337 UE 377 EN ISO 15002:2008
Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves - Amendment 1: Filtration and information to be supplied by the manufacturer (ISO 10524-3:2005/Amd 1:2013)
Pressure regulators for use with medical gases - Part 4: Low-pressure regulators (ISO 10524-4:2008)
Lung ventilators - Part 4: Particular requirements for operator-powered resuscitators (ISO 10651-4:2002)
Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Part 6: Home-care ventilatory support devices (ISO 10651-6:2004)
Flow-metering devices for connection to terminal units of medical gas pipeline systems (ISO 15002:2008)
TC
CEN/TC 70 2014/68/EU
CEN/TC 70 2014/68/EU
CEN/TC 70 2014/68/EU
CLC/TC 210 2014/30/EU
CLC/TC 13 2014/30/EU
CLC/TC 13 2014/30/EU
CLC/TC 13 2014/30/EU
CEN/TC 151 2014/30/EU
CEN/TC 185 305/2011
CEN/TC 185 305/2011
CEN/TC 51 305/2011
CEN/TC 241 305/2011
CEN/TC 241 305/2011
Directiva/ Regulament
CEN/TC 51 305/2011
CEN/TC 241 305/2011
CEN/TC 241 305/2011
CEN/TC 51 305/2011
CEN/TC 128 305/2011
CEN/TC 128 305/2011
CEN/TC 129 305/2011
CEN/TC 393 305/2011
CEN/TC 393 305/2011
CEN/TC 393 305/2011
CEN/TC 393 305/2011
CEN/TC 393 305/2011
CEN/TC 226 305/2011
CEN/TC 227 305/2011
CEN/TC 227 305/2011
CEN/TC 227 305/2011
CEN/TC 227 305/2011
CEN/TC 227 305/2011
CEN/TC 227 305/2011
CEN/TC 227 305/2011
CEN/TC 227 305/2011
CEN/TC 227 305/2011
CEN/TC 226 305/2011
CEN/TC 72 305/2011
CEN/TC 72 305/2011
CEN/TC 191 305/2011
CEN/TC 191 305/2011
CEN/TC 191 305/2011
CEN/TC 130 305/2011
CEN/TC 195 1253/2014
CEN/TC 195 1253/2014
CEN/TC 195 1253/2014
CEN/TC 195 1253/2014
CEN/TC 33 305/2011
CEN/TC 33 305/2011
CEN/TC 33 2014/35/EU
CEN/TC 33 305/2011
CEN/TC 177 305/2011
CEN/TC 104 305/2011
CEN/TC 134 305/2011
CEN/TC 193 305/2011
CEN/TC 193 305/2011
CEN/TC 166 305/2011
CEN/TC 166 305/2011
CEN/TC 166 305/2011
CEN/TC 166 305/2011
CEN/TC 166 305/2011
CLC/TC 111X 617/2013
CLC/TC 111X 617/2013
CLC/TC 111X 617/2013
CLC/TC 111X 617/2013
CEN/TC 136 2001/95/EC
CEN/TC 136 2001/95/EC
CEN/TC 74 2014/68/EU
CEN/TC 69 2014/68/EU
CEN/TC 237 2014/32/EU
CEN/TC 52 2009/48/EC
CEN/TC 52 2009/48/EC
CEN/TC 52 2009/48/EC
CLC/TC 34 244/2009
CLC/TC 34 244/2009
CLC/TC 21X 617/2013
CEN/CLC/JTC 1 765/2008
CEN/SS S26 765/2008
CEN/TC 136 89/686/EEC
CEN/TC 136 89/686/EEC
CEN/TC 144 2006/42/EC
CEN/TC 144 2006/42/EC
CEN/TC 144 2006/42/EC
CEN/TC 144 2006/42/EC
CEN/TC 144 2006/42/EC
CEN/TC 144 2006/42/EC
CEN/TC 144 2006/42/EC
CEN/TC 144 2006/42/EC
CEN/TC 151 2006/42/EC
CEN/TC 114 2006/42/EC
CEN/TC 162 89/686/EEC
CEN/TC 162 89/686/EEC
CEN/TC 162 89/686/EEC
CEN/TC 162 89/686/EECCEN/TC 162 89/686/EEC
CEN/TC 162 89/686/EEC
CEN/TC 162 89/686/EEC
CEN/TC 161 89/686/EEC
CEN/TC 161 89/686/EEC
CEN/TC 162 89/686/EEC
CEN/TC 212 2013/29/EU
CEN/TC 212 2013/29/EU
CLC/TC 62 93/42/EEC
CLC/TC 62 93/42/EEC
CLC/TC 62 93/42/EEC
CLC/TC 62 93/42/EEC
CLC/TC 62 93/42/EEC
CEN/TC 285 93/42/EEC
CEN/TC 215 93/42/EEC
CEN/TC 205 93/42/EEC
CEN/TC 293 93/42/EEC
CEN/TC 206 93/42/EEC
CEN/TC 206 93/42/EEC
CEN/TC 206 93/42/EEC
CEN/TC 206 93/42/EEC
CEN/TC 206 93/42/EEC
CEN/TC 206 93/42/EEC
CEN/TC 206 93/42/EEC
CEN/TC 206 93/42/EEC
CEN/TC 206 93/42/EEC
CEN/TC 204 93/42/EEC
CLC/TC 18X 2013/53/EU
CEN/TC 256 2008/57/EC
CEN/TC 256 2008/57/EC
CEN/TC 256 2008/57/EC
CEN/TC 256 2008/57/EC
CEN/TC 256 2008/57/EC
CEN/TC 256 2008/57/EC
CEN/TC 256 2008/57/EC
CEN/TC 256 2008/57/EC
CEN/TC 256 2008/57/EC
CEN/TC 256 2008/57/EC
CEN/TC 256 2008/57/EC
CEN/TC 256 2008/57/EC
CEN/TC 256 2008/57/EC
CEN/TC 256 2008/57/EC
CEN/TC 256 2008/57/EC
CEN/TC 256 2008/57/EC
CEN/TC 256 2008/57/EC
CEN/TC 256 2008/57/EC
CEN/TC 256 2008/57/EC
CEN/TC 256 2008/57/EC
CEN/TC 256 2008/57/EC
CEN/TC 256 2008/57/EC
CEN/TC 256 2008/57/EC
CEN/TC 256 2008/57/EC
CEN/TC 256 2008/57/EC
CEN/SS T01 2013/53/EU
CEN/SS T01 2013/53/EU
CEN/SS T01 2013/53/EU
CEN/SS T01 2013/53/EU
CEN/SS T01 2013/53/EU
CEN/SS T01 2013/53/EU
CEN/SS T01 2013/53/EU
CEN/SS T01 2013/53/EU
CEN/SS T01 2013/53/EU
CEN/SS T01 2013/53/EU
CEN/SS T01 2013/53/EU
CEN/SS T01 2013/53/EU
CEN/SS T01 2013/53/EU
CEN/SS T01 2013/53/EU
CEN/SS T01 2013/53/EU
CEN/SS T01 2013/53/EU
CEN/SS T01 2013/53/EU
CEN/SS T01 2013/53/EU
CEN/SS T01 2013/53/EU
CEN/SS T01 2013/53/EU
CEN/SS T01 2013/53/EU
CEN/SS T01 2013/53/EU
CEN/SS T01 2013/53/EU
CEN/SS T01 2013/53/EU
CEN/SS T01 2013/53/EU
CLC/TC 9X 2008/57/EC
CLC/TC 9X 2008/57/EC
CLC/TC 9X 2008/57/EC
CLC/TC 9X 2008/57/EC
CLC/TC 9X 2008/57/EC
CLC/TC 9X 2008/57/EC
CLC/TC 121A 2014/35/EU
CLC/TC 121A 2006/42/EC
CLC/TC 121A 2014/35/EU
CLC/TC 121A 2014/35/EU
CLC/TC 121A 2014/35/EU
CLC/TC 23BX 2014/35/EU
CLC/TC 23BX 2014/35/EU
CLC/TC 213 2014/35/EU
CLC/TC 213 2014/35/EUCLC/TC 213 2014/35/EU
CLC/TC 62 93/42/EEC
CLC/TC 62 93/42/EEC
CLC/TC 62 93/42/EEC
CLC/TC 65X 2014/35/EU
CLC/SR 66 2014/35/EU
CEN/TC 121 2014/68/EU
CEN/TC 121 2014/68/EU
CEN/TC 121 2014/68/EU
ECISS/TC 107 2014/29/EU
ECISS/TC 111 2014/68/EUECISS/TC 107 2014/68/EU
ECISS/TC 107 2014/68/EUECISS/TC 107 2014/68/EU
CEN/TC 143 2006/42/EC
CEN/TC 144 2006/42/EC
CEN/TC 354 2006/42/EC
CEN/TC 354 2006/42/EC
CEN/TC 10 2014/33/EU
CEN/TC 10 2014/33/EU
CEN/TC 242 2000/9/EC
CEN/TC 242 2000/9/EC
CEN/TC 69 2014/68/EU
CEN/TC 401 2001/95/EC
CEN/TC 260 2003/2003
CEN/TC 155 2014/68/EU
CEN/TC 155 2014/68/EU
CEN/TC 155 97/23/EC
CEN/TC 249 305/2011
CEN/TC 128 305/2011
CEN/TC 128 305/2011
CEN/TC 254 305/2011
CEN/TC 361 305/2011
CEN/TC 88 305/2011
CEN/TC 163 305/2011CEN/TC 67 305/2011
CEN/TC 163 305/2011
CEN/TC 163 305/2011
CEN/TC 163 305/2011
CEN/TC 163 305/2011CEN/TC 163 305/2011CEN/TC 163 305/2011CEN/TC 163 305/2011
CEN/TC 67 305/2011
CEN/TC 207 2001/95/EC
CEN/TC 207 2001/95/EC
CEN/TC 112 305/2011
CEN/TC 175 305/2011
CEN/TC 364 2001/95/EC
CEN/TC 207 2001/95/EC
CLC/TC 31 2014/34/EU
CLC/TC 31 2014/34/EU
CLC/TC 31 2014/34/EU
CLC/TC 31 2014/34/EU
CEN/TC 256 2008/57/EC
CEN/TC 256 2008/57/EC
CEN/TC 256 2006/42/EC
CEN/TC 256 2008/57/EC
CEN/TC 256 2008/57/EC
CLC/TC 20 2014/35/EU
CLC/TC 46X 2014/35/EU
CLC/TC 46X 2014/35/EU
CLC/TC 46X 2014/35/EU
CLC/TC 46X 2014/35/EU
CLC/TC 46X 2014/35/EU
CLC/TC 46X 2014/35/EU
CLC/TC 46X 2014/35/EU
CLC/TC 46X 2014/35/EU
CLC/TC 46X 2014/35/EU
CLC/TC 46X 2014/35/EU
CLC/TC 46X 2014/35/EU
CLC/TC 46X 2014/35/EU
CLC/TC 46X 2014/35/EU
CEN/TC 267 2014/68/EU
CEN/TC 267 2014/68/EU
CLC/TC 78 89/686/EEC
CEN/TC 165 305/2011
ECISS/TC 110 2014/68/EU
ECISS/TC 110 2014/68/EU
ECISS/TC 110 2014/68/EU
ECISS/TC 110 2014/68/EU
ECISS/TC 110 2014/68/EU
ECISS/TC 110 2014/68/EU
CEN/TC 57 2006/42/EC
CEN/TC 109 811/2013
CEN/TC 62 2009/142/EC
CEN/TC 109 811/2013
CEN/TC 109 92/42/EEC
CLC/TC 59X 96/60/EC
CLC/TC 59X 666/2013
CLC/TC 59X 66/2014
CLC/TC 59X 1015/2010
CLC/TC 72 2014/35/EU
CLC/TC 61 2006/42/EC
CLC/TC 61 2006/42/EC
CLC/TC 61 2006/42/EC
CLC/TC 61 2006/42/EC
CLC/TC 61 2006/42/EC
CLC/TC 61 2014/35/EU
CLC/TC 61 2006/42/EC
CLC/TC 61 2014/35/EU
CLC/TC 61 2014/35/EU
CLC/TC 61 2014/35/EU
CLC/TC 61 2006/42/EC
CLC/TC 61 2006/42/EC
CLC/TC 61 2014/35/EU
CLC/TC 61 2006/42/EC
CLC/TC 116 2006/42/EC
CLC/TC 116 2006/42/EC
CEN/TC 33 2001/95/EC
CEN/TC 33 2001/95/EC
CEN/TC 124 305/2011
CLC/TC 69X 2014/35/EU
CLC/TC 69X 2014/35/EU
CLC/TC 69X 2014/35/EU
CEN/TC 349 305/2011
CEN/TC 349 305/2011
CEN/TC 349 305/2011
CEN/TC 349 305/2011
CEN/TC 349 305/2011
CEN/TC 298 305/2011
CEN/TC 193 305/2011
CEN/TC 193 305/2011
CEN/TC 125 305/2011
CEN/TC 125 305/2011
CEN/TC 125 305/2011
CEN/TC 189 305/2011
CEN/TC 189 305/2011
CEN/TC 189 305/2011
CEN/TC 189 305/2011
CEN/TC 189 305/2011
CEN/TC 189 305/2011
CEN/TC 189 305/2011
CEN/TC 189 305/2011
CLC/TC 108X 2014/35/EU
CLC/TC 100X 617/2013
CEN/TC 204 93/42/EEC
CEN/TC 239 93/42/EEC
CEN/TC 239 93/42/EEC
CEN/TC 239 93/42/EEC
CEN/TC 239 93/42/EEC
CEN/TC 215 93/42/EEC
CEN/TC 215 93/42/EEC
CEN/TC 215 93/42/EEC
CEN/TC 215 93/42/EEC
CEN/TC 215 93/42/EEC
CEN/TC 215 93/42/EEC
CEN/TC 215 93/42/EEC
CEN/TC 215 93/42/EEC
CEN/TC 205 93/42/EEC
CEN/TC 215 93/42/EEC
SECTIUNEA 3, CAPITOLUL 1
Minister CT Indicativ EN Titlu Faza
1 MADR 95 prEN ISO 9233-1 4020
2 MADR 95 prEN ISO 9233-2 4020
3 MADR 95 EN ISO 11133:2014/prA2 4020
4 MADR 95 prEN ISO 16140-5 4020
5 MADR 95 prEN ISO 16140-3 4020
6 MADR 95 prEN ISO 16140-6 4020
7 MADR 95 prEN ISO 16140-4 4020
8 MADR 95 FprCEN/TS 17174 5020
9 MADR 95 prEN 17194 4020
10 MADR 95 prEN 17203 4020
11 MADR 95 prEN 17212 4020
12 MADR 95 prEN ISO 17678 4020
13 MADR 180 prEN ISO 3961 4020
14 MADR 180 prEN ISO 7971-3 4020
Proiectele de standarde europene CEN-CENELEC cu faze de vot in 2018
Nr crt
Cheese, cheese rind and processed cheese - Determination of natamycin content - Part 1: Molecular absorption spectrometric method for cheese rind (ISO/FDIS 9233-1:2017)
Cheese, cheese rind and processed cheese - Determination of natamycin content - Part 2: High-performance liquid chromatographic method for cheese, cheese rind and processed cheese (ISO/FDIS 9233-2:2017)
Microbiology of food, animal feed and water - Preparation, production, storage and performance testing of culture media - Amendment 2 (ISO 11133:2014/DAmd 2:2017)
Microbiology of the food chain - Method validation - Part 5: Protocol for factorial interlaboratory validation of non-proprietary methods (ISO/DIS 16140-5:2017)
Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference and validated alternative methods implemented in a single laboratory (ISO/DIS 16140-3:2017)
Microbiology of the food chain - Method validation - Part 6: Protocol for the validation of alternative (proprietary) methods for microbiological confirmation and typing procedures (ISO/DIS 16140-6:2017)
Microbiology of the food chain - Method validation - Part 4: Protocol for single-laboratory (in-house) method validation (ISO/DIS 16140-4:2017)
Animal feeding stuffs: Methods of sampling and analysis - Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of heavy metals
Animal feeding stuffs: Methods of sampling and analysis - Determination of Deoxynivalenol, Aflatoxin B1, Fumonisin B1&B2, T-2 & HT-2 toxins, Zearalenone and Ochratoxin A in feed materials and compound feed by LC-MS/MS
Foodstuffs - Determination of citrinin in food by liquid chromatography tandem mass spectrometry (LC-MS/MS)
Animal Feeding stuffs: Methods of sampling and analsysis - Determination of melamine and cyanuric acid content by liquid chromatographic method with mass spectrometric detection (LC-MS/MS)
Milk and milk products - Determination of milk fat purity by gas chromatographic analysis of triglycerides (Reference method) (ISO/DIS 17678:2017)
Animal and vegetable fats and oils - Determination of iodine value (ISO/DIS 3961:2017)
Cereals - Determination of bulk density, called mass per hectolitre - Part 3: Routine method (ISO/DIS 7971-3:2017)
15 MADR 180 prEN ISO 7971-2 4020
16 MADR 180 prEN ISO 9167 4020
17 MADR 180 prEN ISO 18363-2 4020
18 MADR 285 EN ISO 11074:2015/prA1 4020
19 MADR 285 prEN ISO 16133 4020
20 MADR 285 prEN ISO 25177 Soil quality - Field soil description (ISO/DIS 25177:2018) 402021 MAI 216 FprCEN/TS 54-14 5020
22 MAI 216 prEN 14972-16 4020
23 MAI 216 FprEN 16712-4 5020
24 MAI 216 prEN 16856 Portable aerosol dispensers for fire extinguishing purposes 4020
25 MAI 376 FprCEN/TS 17091 5020
26 MAI 376 prEN 17173 European CBRNE glossary 402027 MAP 52 prEN ISO 5667-3 4020
28 MAP 52 prEN ISO 5815-1 4020
29 MAP 52 prEN ISO 7027-2 4020
30 MAP 52 prEN ISO 12010 4020
31 MAP 52 EN 13077:2018 5020
32 MAP 52 prEN 17204 4020
33 MAP 52 prEN 17211 4020
34 MAP 52 prEN 17215 4020
35 MAP 52 prEN 17218 4020
36 MAP 52 prEN 17233 4020
Cereals - Determination of bulk density, called mass per hectolitre - Part 2: Method of traceability for measuring instruments through reference to the international standard instrument (ISO/DIS 7971-2:2017)
Rapeseed - Determination of glucosinolates content - Method using high-performance liquid chromatography (ISO/DIS 9167/2017)
Animal and vegetable fats and oils - Determination of fatty-acid-bound chloropropanediols (MCPDs) and glycidol by GC/MS - Part 2: Method using slow alkaline transesterification and measurement for 2-MCPD, 3-MCPD and glycidol (ISO/DIS 18363-2:2017)
Soil quality - Vocabulary - Amendment 1 (ISO 11074:2015/DAM 1:2017)
Soil quality - Guidance on the establishment and maintenance of monitoring programmes
Fire detection and fire alarm systems - Part 14: Guidelines for planning, design, installation, commissioning, use and maintenance
Fixed firefighting systems - Water mist systems - Part 16: Test protocol for industrial oil cookers for open nozzle systems
Portable equipment for projecting extinguishing agents supplied by firefighting pumps - Portable foam generators - Part 4: High expansion foam generators PN16
Crisis management - Guidance for developing a strategic capability
Water quality - Sampling - Part 3: Preservation and handling of water samples (ISO/FDIS 5667-3:2018)
Water quality - Determination of biochemical oxygen demand after n days (BODn) - Part 1: Dilution and seeding method with allylthiourea addition (ISO/DIS 5815-1:2017)
Water quality - Determination of turbidity - Part 2: Semi-quantitative methods for the assessment of transparency of waters (ISO/DIS 7027-2:2017)
Water quality - Determination of short-chain polychlorinated alkanes (SCCP) in water - Method using gas chromatography-mass spectrometry (GC-MS) and negative-ion chemical ionization (NCI) (ISO/DIS 12010:2018)
Devices to prevent pollution by backflow of potable water - Air gap with non-circular overflow (unrestricted) - Family A - Type B
Water quality - Guidance on analysis of mesozooplankton from marine and brackish water
Water quality - Guidance on mapping of seagrasses and macroalgae in the eulittoral zone
Chemicals used for treatment of water intended for human consumption - Iron-based coagulants - Analytical methods
Water quality - Guidance on sampling of mesozooplankton from marine and brackish water using mesh
Water quality - Guidance for assessing the efficiency and related metrics of fish passage solutions using telemetry
37 MAP 52 FprCEN/TR 17244 5020
38 MAP 52 FprCEN/TR 17245 5020
39 MCIN 380 FprEN 17036 5020
40 MCIN 380 prEN 17187 4020
41 MCSI 138 CLC/FprTR 50682:2017 5020
42 MCSI 138 prEN 60793-1-31:2018 4020
43 MCSI 138 prEN 60793-1-40:2018 Optical fibres - Part 1-40: Attenuation measurement methods 4020
44 MCSI 138 prEN 60793-2-50:2018 4020
45 MCSI 138 prEN 60793-1-32:2018 4020
46 MCSI 138 prEN 60869-1:2018 4020
47 MCSI 138 FprEN 61290-4-3:2018 5020
48 MCSI 138 prEN 62148-21:2018 4020
49 MCSI 138 prEN 62149-10:2018 4020
50 MCSI 138 FprEN 62343-3-4:2018 5020
51 MCSI 204 FprCEN/TR 419030 5020
52 MCSI 204 FprCEN/TR 419040 5020
53 MCSI 204 FprEN 419221-5 5020
54 MCSI 204 FprEN 419241-1 5020
55 MCSI 207 FprEN 50173-1 5020
56 MCSI 207 FprEN 50173-2 5020
57 MCSI 207 FprEN 50173-3 5020
58 MCSI 207 FprEN 50173-6 5020
59 MCSI 207 FprEN 50173-4 5020
60 MCSI 207 FprEN 50173-5 5020
61 MCSI 319 prEN ISO 12381 4020
62 MCSI 319 FprCEN ISO/TS 19293 5020
Water quality - Technical report for the management of diatom barcodes
Water quality - Technical report for the routine sampling of benthic diatoms from rivers and lakes adapted for metabarcoding analyses
Conservation of Cultural Heritage - Artificial ageing by simulated solar radiation of the surface of untreated or treated porous inorganic materials
Conservation of cultural heritage - Characterization of mortars used in cultural heritage
Consideration on the use of OTDRs to measure return loss of single-mode optical fibre connections
Optical fibres - Part 1-31: Measurement methods and test procedures - Tensile strength
Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres
Optical fibres - Part 1-32: Measurement methods and test procedures - Coating strippability
Fibre optic interconnecting devices and passive components - Fibre optic passive power control devices - Part 1: Generic specification
Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control
Fibre optic active components and devices - Package and interface standards - Part 21: Design guide of electrical interface of PIC packages using Silicon Fine-pitch Ball Grid Array (S-FBGA) and Silicon Fine-pitch Land Grid Array (S-FLGA)
Fibre optic active components and devices - Performance standards - Part 10: RoF (radio over fiber) transceivers for mobile fronthaul
Dynamic modules - Part 3-4: Performance specification templates - Multicast optical switches
Rationalized structure for electronic signature standardization - Best practices for SMEs
Rationalized structure for electronic signature standardization - Guidelines for citizens
Protection Profiles for TSP Cryptographic Modules - Part 5: Cryptographic Module for Trust Services
Trustworthy Systems Supporting Server Signing - Part 1: General System Security Requirements
Information technology - Generic cabling systems - Part 1: General requirements
Information technology - Generic cabling systems - Part 2: Office spaces
Information technology - Generic cabling systems - Part 3: Industrial spaces
Information technology - Generic cabling systems - Part 6: Distributed building services
Information technology - Generic cabling systems - Part 4: Homes
Information technology - Generic cabling systems - Part 5: Data centre spaces
Health informatics - Time standards for healthcare specific problems (ISO/DIS 12381:2017)
Health Informatics - Requirements for a record of the dispense of a medicinal product (ISO/PRF TS 19293:2017)
63 MCSI 319 FprCEN ISO/TS 20443 5020
64 MCSI 319 FprCEN ISO/TS 20451 5020
65 MCSI 375 prEN 60268-4:2017 Sound system equipment - Part 4: Microphones 402066 MCSI 375 EN 62368-1:2014/prAB:2018 4020
67 MCSI 375 prEN 62680-1-4:2017 4020
68 MCSI 375 prEN 62680-1-3:2018 4020
69 MCSI 375 prEN 63006:2018 Wireless Power Transfer (WPT) Glossary of Terms (TA 15) 4020
70 MCSI 379 FprCEN/TS 17217 5020
71 MDRAPFE 111 EN 14195:2014/prA1 4020
72 MDRAPFE 113 prEN 13375 4020
73 MDRAPFE 113 prEN 13495 4020
74 MDRAPFE 113 FprEN 13497 5020
75 MDRAPFE 113 FprEN 14064-1 5020
76 MDRAPFE 113 prEN 14695 4020
77 MDRAPFE 113 prEN 16002 4020
78 MDRAPFE 113 FprCEN/TS 16637-1 5020
79 MDRAPFE 113 FprEN 17048 5020
80 MDRAPFE 113 FprEN 17101 5020
81 MDRAPFE 113 FprEN 17140 5020
Health informatics - Identification of medicinal products - Implementation guidelines for ISO 11615 data elements and structures for the unique identification and exchange of regulated medicinal product information (ISO/TS 20443:2017)
Health informatics - Identification of medicinal products - Implementation guidelines for ISO 11616 data elements and structures for the unique identification and exchange of regulated pharmaceutical product information (ISO/TS 20451:2017)
Audio/video, information and communication technology equipment - Part 1: Safety requirements (IEC 62368-1:2014, modified)
Universal Serial Bus interfaces for data and power - Part 1-4: Common Components - USB Type-C™ Authentication Specification
Universal serial bus interfaces for data and power - Part 1-3: Common components - USB Type-CTM Cable and Connector Specification
Postal services - Reverse envelope - Design and printing requirements
Metal framing components for gypsum board systems - Definitions, requirements and test methods
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Specimen preparation
Thermal insulation products for building applications - Determination of the pull-off resistance of external thermal insulation composite systems (ETICS)(foam block test)
Thermal insulation products for building applications - Determination of the resistance to impact of external thermal insulation composite systems (ETICS)
Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 1: Specification for the loose-fill products before installation
Flexible sheets for waterproofing - Reinforced bitumen sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete - Definitions and characteristics
Flexible sheets for waterproofing - Determination of the resistance to wind load of mechanically fastened flexible sheets for roof waterproofing
Construction products - Assessment of release of dangerous substances - Part 1: Guidance for the determination of leaching tests and additional testing steps
Flexible sheets for waterproofing - Plastic and rubber sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete - Definitions and characteristics
Thermal insulation products for buildings - Methods of identification and test methods for one-component PU adhesive foam for External Thermal Insulation Composite Systems (ETICS)
Thermal insulation products for buildings - Factory made Vacuum Insulation Panels (VIP) - Specification
82 MDRAPFE 113 prEN 17190 Flexible sheets for waterproofing - Solar Reflectance Index 4020
83 MDRAPFE 113 FprCEN/TS 17195 5020
84 MDRAPFE 113 FprCEN/TS 17196 5020
85 MDRAPFE 113 FprCEN/TS 17197 5020
86 MDRAPFE 113 FprCEN/TS 17200 5020
87 MDRAPFE 113 FprCEN/TS 17201 5020
88 MDRAPFE 113 FprCEN/TS 17216 5020
89 MDRAPFE 114 prEN ISO 10545-4 4020
90 MDRAPFE 114 FprCEN/TR 17221 5020
91 MDRAPFE 115 prEN 16140 4020
92 MDRAPFE 122 FprEN 1279-6 5020
93 MDRAPFE 122 FprEN 1279-5 5020
94 MDRAPFE 122 FprEN 1279-1 5020
95 MDRAPFE 122 FprEN 1279-4 5020
96 MDRAPFE 122 FprEN 1279-2 5020
97 MDRAPFE 122 FprEN 1279-3 5020
98 MDRAPFE 122 prEN 12150-2 4020
99 MDRAPFE 122 prEN 12898 Glass in building - Determination of the emissivity 4020100 MDRAPFE 122 prEN 14179-2 4020
101 MDRAPFE 122 prEN 14449 4020
102 MDRAPFE 122 prEN 16612 4020
103 MDRAPFE 122 FprEN 17074 5020
Construction products: Assessment of release of dangerous substances - Analysis of inorganic substances in eluates
Construction products: Assessment of release of dangerous substances - Digestion by aqua regia for subsequent analysis of inorganic substances
Construction products: Assessment of release of dangerous substances - Analysis of inorganic substances in digests and eluates - Analysis by Inductively Coupled Plasma - Optical Emission Spectrometry (ICP-OES)
Construction products: Assessment of release of dangerous substances - Analysis of inorganic substances in digests and eluates - Analysis by Inductively Coupled Plasma - Mass Spectrometry (ICP-MS)
Construction products: Assessment of release of dangerous substances - Content of inorganic substances - Methods for analysis of aqua regia digests
Construction products - Assessment of release of dangerous substances - Determination of activity concentrations of radium-226, thorium-232 and potassium-40 in construction products using semiconductor gamma-ray spectrometry
Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength (ISO/DIS 10545-4:2017)
Guidance on the application of CE marking and preparation of Declaration of Performance for sanitary appliances
Natural stone test methods - Determination of sensitivity to changes in appearance produced by thermal cycles
Glass in building - Insulating glass units - Part 6: Factory production control and periodic tests
Glass in building - Insulating glass units - Part 5: Evaluation of conformity
Glass in Building - Insulating glass units - Part 1: Generalities, system description, rules for substitution, tolerances and visual quality
Glass in Building - Insulating Glass Units - Part 4: Methods of test for the physical attributes of edge seal components and inserts
Glass in building - Insulating glass units - Part 2: Long term test method and requirements for moisture penetration
Glass in building - Insulating glass units - Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances
Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Product standard
Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 2: Product standard
Glass in building - Laminated glass and laminated safety glass - Product standard
Glass in building - Determination of the lateral load resistance of glass panes by calculation
Glass in building - Environmental product declaration - Product category rules for flat glass products
104 MDRAPFE 136 FprHD 60364-7-719 5020
105 MDRAPFE 136 4020
106 MDRAPFE 136 HD 60364-4-42:2011/prAB:2017 4020
107 MDRAPFE 136 FprHD 60364-7-711:2017 5020
108 MDRAPFE 187 FprEN 1793-2 5020
109 MDRAPFE 187 FprEN 1793-6 5020
110 MDRAPFE 187 FprEN 12697-26 Bituminous mixtures - Test methods - Part 26: Stiffness 5020111 MDRAPFE 187 FprEN 12697-12 5020
112 MDRAPFE 187 FprEN 12697-24 5020
113 MDRAPFE 187 EN 12697-2:2015/prA1 4020
114 MDRAPFE 187 prEN 12697-32 4020
115 MDRAPFE 187 prEN 12697-31 4020
116 MDRAPFE 187 prEN 12697-54 4020
117 MDRAPFE 187 prEN 12697-55 4020
118 MDRAPFE 187 prEN 12697-53 4020
119 MDRAPFE 187 prEN 12697-56 4020
120 MDRAPFE 187 prEN 12767 4020
121 MDRAPFE 187 prEN 13074-2 4020
122 MDRAPFE 187 prEN 13074-1 4020
123 MDRAPFE 187 prEN 13108-31 4020
124 MDRAPFE 187 FprEN 13302 5020
Low-voltage installations - Part 7-719: Requirements for special installations or locations - Lighting installations for advertising signs with a rated output voltage not exceeding 1 000 V, which are illuminated by hot-cathode-fluorescent-lamps, luminous-discharge tubes (neon-tubes), inductive discharge lamps, light emitting diodes (LED) and/or LED modules
HD 60364-7-709:2009/prAA:2017
Low-voltage electrical installations - Part 7-709: Requirements for special installations or locations - Harbours, marinas and similar locations - Special requirements for shore supply to ships
Low voltage electrical installations - Part 4-42: Protection for safety - Protection against thermal effects
Low-voltage electrical installations - Part 7-711: Requirements for special installations or locations - Exhibitions, shows and stands
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 2: Intrinsic characteristics of airborne sound insulation under diffuse sound field conditions
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - In situ values of airborne sound insulation under direct sound field conditions
Bituminous mixtures - Test methods - Part 12: Determination of the water sensitivity of bituminous specimens
Bituminous mixtures - Test methods - Part 24: Resistance to fatigue
Bituminous mixtures - Test methods - Part 2: Determination of particle size distribution
Bituminous mixtures - Test methods - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor
Bituminous mixtures - Test methods - Part 31: Specimen preparation by gyratory compactor
Bituminous mixtures - Test methods - Part 54: Curing of specimen for test of mixtures with bitumen emulsion
Bituminous mixtures - Test methods - Part 55: Organoleptic assessment of compatibility of constituent materials of a mixture with bitumen emulsion
Bituminous mixtures - Test methods - Part 53: Cohesion increase by spreadability-meter method
Bituminous mixtures - Test methods - Part 56: Specimen preparation by static compaction
Passive safety of support structures for road equipment - Requirements and test methods
Bitumen and bituminous binders - Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders - Part 2: Stabilisation after recovery by evaporation
Bitumen and bituminous binders - Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders - Part 1: Recovery by evaporation
Bituminous mixtures - Material specifications - Part 31: Asphalt Concrete with Bituminous Emulsion
Bitumen and bituminous binders - Determination of dynamic viscosity of bituminous binder using a rotating spindle apparatus
125 MDRAPFE 187 FprEN 13880-13 5020
126 MDRAPFE 187 FprEN 13880-10 5020
127 MDRAPFE 240 FprEN 12665 5020
128 MDRAPFE 276 prEN ISO 9053 4020
129 MDRAPFE 276 EN 16205:2013/FprA1 Laboratory measurement of walking noise on floors 5020130 MDRAPFE 276 FprCEN/TR 16961 Declaration of uncertainties in test reports 5020131 MDRAPFE 281 EN ISO 12570:2000/prA2 4020
132 MDRAPFE 302 prEN 448 4020
133 MDRAPFE 302 prEN 488 4020
134 MDRAPFE 302 prEN 14419 4020
135 MDRAPFE 302 prEN 15698-1 4020
136 MDRAPFE 302 prEN 15698-2 4020
137 MDRAPFE 302 prEN 17192 4020
138 MDRAPFE 302 prEN ISO 29463-4 4020
139 MDRAPFE 302 prEN ISO 29463-2 4020
140 MDRAPFE 302 prEN ISO 29463-3 4020
141 MDRAPFE 302 prEN ISO 29463-5 4020
142 MDRAPFE 318 prEN 1527 4020
143 MDRAPFE 318 FprEN 12519 Windows and pedestrian doors - Terminology 5020144 MDRAPFE 318 prEN 12978 4020
Hot applied joint sealants - Part 13: Test method for the determination of the discontinuous extension (adherence test)
Hot applied joint sealants - Part 10: Test method for the determination of adhesion and cohesion following continuous extension and compression
Light and lighting - Basic terms and criteria for specifying lighting requirements
Acoustics - Determination of static airflow resistance (ISO/DIS 9053:2017)
Hygrothermal performance of building materials and products - Determination of moisture content by drying at elevated temperature - Amendment 2 (ISO 12570:2000/FDAM 2:2017)
District heating pipes - Bonded single pipe systems for directly buried hot water networks - Factory made fitting assemblies of steel service pipes, polyurethane thermal insulation and a casing of polyethylene
District heating pipes - Bonded single pipe systems for directly buried hot water networks - Factory made steel valve assembly for steel service pipes, polyurethane thermal insulation and a casing of polyethylene
District heating pipes - Bonded single and twin pipe systems for buried hot water networks - Surveillance systems
District heating pipes - Bonded twin pipe systems for directly buried hot water networks - Part 1: Factory made twin pipe assembly of steel service pipe, polyurethane thermal insulation and a casing of polyethylene
District heating pipes - Bonded twin pipe systems for directly buried hot water networks - Part 2: Factory made fitting and valve assemblies of steel service pipes, polyurethane thermal insulation and one casing of polyethylene
Ductwork - Non-metallic ductwork - Requirements and test methods
High-efficiency filters and filter media for removing particles in air - Part 4: Test method for determining leakage of filter elements-Scan method (ISO 29463-4:2011)
High-efficiency filters and filter media for removing particles in air - Part 2: Aerosol production, measuring equipment and particle-counting statistics (ISO 29463-2:2011)
High-efficiency filters and filter media for removing particles in air - Part 3: Testing flat sheet filter media (ISO 29463-3:2011)
High-efficiency filters and filter media for removing particles in air - Part 5: Test method for filter elements (ISO 29463-5:2011)
Building hardware - Hardware for sliding doors and folding doors - Requirements and test methods
Industrial, commercial and garage doors and gates - Safety devices for power operated doors and gates - Requirements and test methods
145 MDRAPFE 318 FprEN 13126-6 5020
146 MDRAPFE 318 prEN 13126-17 4020
147 MDRAPFE 318 prEN 13126-15 4020
148 MDRAPFE 318 prEN 13126-16 4020
149 MDRAPFE 318 EN 16758:2016/prA1:2017 4020
150 MDRAPFE 318 prEN 17213 4020
151 MDRAPFE 321 prEN 1097-8 4020
152 MDRAPFE 321 prEN 1097-2 4020
153 MDRAPFE 321 FprEN 12390-15 5020
154 MDRAPFE 321 FprEN 12390-14 5020
155 MDRAPFE 326 EN 384:2016/prA1 4020
156 MDRAPFE 335 prEN ISO 19650-1 4020
157 MDRAPFE 335 prEN ISO 19650-2 4020
158 MDRAPFE 343 prEN 1337-2 Structural bearings - Part 2: Sliding elements 4020159 MDRAPFE 343 prEN 1337-3 Structural bearings - Part 3: Elastomeric bearings 4020160 MDRAPFE 343 prEN 1337-4 Structural bearings - Part 4: Roller bearings 4020161 MDRAPFE 343 prEN 1337-5 Structural bearings - Part 5: Pot bearings 4020162 MDRAPFE 343 prEN 1337-6 Structural bearings - Part 6: Rocker bearings 4020163 MDRAPFE 343 prEN 1337-7 4020
164 MDRAPFE 343 prEN 1337-8 4020
165 MDRAPFE 343 prEN 1337-1 Structural bearings - Part 1: General 4020166 MDRAPFE 343 FprEN 1992-4 5020
167 MDRAPFE 343 FprEN 15129 Anti-seismic devices 5020168 MDRAPFE 343 FprCEN/TR 17231 5020
169 MDRAPFE 346 prEN 62305-1:2017/prAA:2017 Protection against lightning - Part 1: General principles 4020
170 MDRAPFE 347 prEN 772-22 4020
Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 6: Variable geometry stay hinges (with or without a friction stay)
Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 17: Hardware for Tilt and Slide windows
Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 15: Rollers for horizontal sliding and hardware for sliding folding windows
Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 16: Hardware for Lift and Slide windows
Curtain walling - Determination of the strength of sheared connections - Test method and requirements
Windows and doors - Environmental Product Declarations - Product category rules for windows and pedestrian doorsets
Tests for mechanical and physical properties of aggregates - Part 8: Determination of the polished stone value
Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation
Testing hardened concrete - Part 15: Adiabatic method for the determination of heat released by concrete during its hardening process
Testing hardened concrete - Part 14: Semi-adiabatic method for the determination of heat released by concrete during its hardening process
Structural timber - Determination of characteristic values of mechanical properties and density
Organization of information about construction works - Information management using building information modelling - Part 1: Concepts and principles (ISO/DIS 19650-1:2018)
Organization of information about construction works - Information management using building information modelling - Part 2: Delivery phase of the assets (ISO/DIS 19650-2:2018)
Structural bearings - Part 7: Spherical and cylindrical PTFE bearings
Structural bearings - Part 8: Guide bearings and Restraint bearings
Eurocode 2 - Design of concrete structures - Part 4: Design of fastenings for use in concrete
Eurocode 1: Actions on Structures - Traffic Loads on Bridges - Track-Bridge Interaction
Methods of test for masonry units - Part 22: Determination of freeze/thaw resistance of clay masonry units
171 MDRAPFE 347 prEN 1015-11 4020
172 MDRAPFE 347 prEN 17193 Clay blocks for floor plates 4020173 MDRAPFE 361 FprEN ISO 17892-9 5020
174 MDRAPFE 361 FprEN ISO 22477-4 5020
175 MDRAPFE 364 prEN ISO 11058 4020
176 MDRAPFE 364 prEN ISO 12957-1 4020
177 MDRAPFE 365 FprEN ISO 41001 5020
178 MDRAPFE 365 prEN ISO 41011 Facility management - Vocabulary (ISO 41011:2017) 4020179 MDRAPFE 365 prEN ISO 41012 4020
180 MDRAPFE 393 EN 16475-3:2016/prA1 4020
181 ME 1 4020
182 ME 3 EN 60076-3:2013/FprA1:2018 5020
183 ME 5 prEN 60112:2017 4020
184 ME 5 prEN 61857-32:2017 4020
185 ME 5 prEN 62631-3-4:2017 4020
186 ME 8 prEN 50064:2017 4020
187 ME 8 prEN 50068:2017 4020
188 ME 8 prEN 50069:2017 4020
189 ME 9 EN 60947-2:2017/prA1:2017 4020
190 ME 9 prEN 60947-7-4:2017 4020
191 ME 11 FprEN 50642 5020
192 ME 11 FprEN 60320-2-4:2017 5020
193 ME 11 FprEN 60320-2-3:2017 5020
Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strength of hardened mortar
Geotechnical investigation and testing - Laboratory testing of soil - Part 9: Consolidated triaxial compression tests on water saturated soils (ISO/FDIS 17892-9:2017)
Geotechnical investigation and testing - Testing of geotechnical structures - Part 4: Testing of piles dynamic load testing (ISO/FDIS 22477-4:2017)
Geotextiles and geotextile-related products - Determination of water permeability characteristics normal to the plane, without load (ISO/DIS 11058:2017)
Geosynthetics - Determination of friction characteristics - Part 1: Direct shear test (ISO/DIS 12957-1:2018)
Facility management - Management systems - Requirements with guidance for use (ISO/FDIS 41001:2018)
Facility management - Guidance on strategic sourcing and the development of agreements (ISO 41012:2017)
Chimneys - Accessories - Part 3: Draught regulators, standstill opening devices and combined secondary air devices - Requirements and test methods
EN 60034-18-41:2014/prA1:2018
Rotating electrical machines - Part 18-41: Partial discharge free electrical insulation systems (Type I) used in rotating electrical machines fed from voltage converters - Qualification and quality control tests
Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air
Method for the determination of the proof and the comparative tracking indices of solid insulating materials
Electrical insulation systems - Procedures for thermal evaluation - Part 32: Multifactor evaluation with increased factors during diagnostic testing
Dielectric and resistive properties of solid insulating materials Part 3-4: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity at elevated temperatures
High-voltage switchgear and controlgear - Gas-filled wrought aluminium and aluminium alloy enclosures
High-voltage switchgear and controlgear - Gas-filled wrought steel enclosures
High-voltage switchgear and controlgear - Gas-filled welded composite enclosures of cast and wrought aluminium alloys
Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
Low-voltage switchgear and controlgear - Part 7-4: Ancillary equipment - PCB terminal blocks for copper conductors
Cable management systems - Test method for content of halogens
Appliance couplers for household and similar general purposes - Part 2-4: Couplers dependent on appliance weight for engagement
Appliance couplers for household and similar general purposes - Part 2-3: Appliance couplers with a degree of protection higher than IPX0
194 ME 11 EN 60320-3:2014/prA1:2017 4020
195 ME 11 EN 60320-1:2015/prA1:2017 4020
196 ME 11 FprEN 60320-2-1:2017 5020
197 ME 11 FprEN 60799:2017 5020
198 ME 11 EN 62423:2012/prAA:2017 4020
199 ME 11 EN IEC 62613-2:2018 5020
200 ME 11 EN IEC 62613-1:2018 5020
201 ME 11 prEN 62962:2017 Particular requirements for load-shedding equipment (LSE) 4020
202 ME 11 FprEN 63024:2017/FprAA:2017 5020
203 ME 12 EN 60269-6:2011/prA1:2018 4020
204 ME 15 EN IEC 65700:2018 Bushings for DC application 4020205 ME 17 FprEN 60749-13:2017 5020
206 ME 17 prEN 61967-1:2018 4020
207 ME 17 prEN 62435-6:2017 4020
208 ME 17 FprEN 62969-2:2017 5020
209 ME 17 prEN 63011-1:2017 4020
210 ME 17 prEN 63011-2:2017 4020
211 ME 17 prEN 63150-1:2018 4020
212 ME 18 prEN 61837-2:2017 4020
213 ME 18 prEN 62884-3:2017 4020
214 ME 19 CLC/FprTR 50625-6 5020
215 ME 20 FprEN 63093-7:2018 5020
Appliance couplers for household and similar general purposes - Part 3: Standard sheets and gauges
Appliance couplers for household and similar general purposes - Part 1: General requirements
Appliance couplers for household and similar general purposes - Part 2-1: Sewing machine couplers
Electrical accessories - Cord sets and interconnection cord sets
Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses
Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-systems) - Part 2: Dimensional compatibility and interchangeability requirements for accessories to be used by various types of ships
Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-Systems) - Part 1: General requirements
Requirements for automatic reclosing devices (ARDs) for circuit-breakers, RCBOs and RCCBs for household and similar uses
Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems
Semiconductor devices - Mechanical and climatic test methods - Part 13: Salt atmosphere
Integrated circuits - Measurement of electromagnetic emissions - Part 1: General conditions and definitions
Electronic components - Long-term storage of electronic semiconductor devices - Part 6: Packaged or Finished Devices
Semiconductor devices - Semiconductor interface for automotive vehicles - Part 2: Efficiency evaluation methods of wireless power transmission using resonance for automotive vehicles sensors
Integrated circuits - Three dimensional integrated circuits - Part 1: General conditions and definitions
Integrated circuits - Three dimensional integrated circuits - Part 2: Alignment of stacked dies having fine pitch interconnect
Semiconductor devices - Measurement and evaluation methods of kinetic energy harvesting devices under practical vibration environment - Part 1: Arbitrary and random mechanical vibrations
Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 2: Ceramic enclosures
Measurement techniques of piezoelectric, dieletric and electrostatic oscillators - Part 3: Frequency aging test methods
Collection, logistics & treatment requirements for WEEE - Part 6: Report on the alignment between Directive 2012/19/EU and EN 50625 series standards and EN 50614
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 7: EER-cores
216 ME 20 prEN 63093-6:2018 4020
217 ME 20 prEN 63093-11:2018 4020
218 ME 20 prEN 63093-5:2018 4020
219 ME 20 prEN 63093-8:2018 4020
220 ME 21 FprEN 60317-74:2017 5020
221 ME 21 FprEN 60317-73:2017 5020
222 ME 23 FprEN 60204-1:2017 5020
223 ME 23 prEN 60746-4:2017 4020
224 ME 23 prEN 61131-10:2017 4020
225 ME 23 FprEN 62046:2018 5020
226 ME 23 prEN 62443-3-2:2017 4020
227 ME 23 FprEN 62714-1:2018 5020
228 ME 23 prEN 62769-100:2017 4020
229 ME 23 prEN 62769-115-2:2018 4020
230 ME 23 FprEN 62828-3:2018 5020
231 ME 24 prEN 61010-2-051:2017 4020
232 ME 24 prEN 61010-2-061:2017 4020
233 ME 24 prEN 61010-2-101:2017 4020
234 ME 24 prEN 61010-2-081:2018 4020
235 ME 26 prEN 61265:2017 4020
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 6: ETD-cores for use in power supplies
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 11: EC-cores for use in power supply applications
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 5: EP-cores and associated parts for use in inductors and transformers
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 8: E-cores
Specifications for particular types of winding wires - Part 74: Polyesterimide enamelled rectangular aluminium wire, class 180
Specifications for particular types of winding wires - Part 73: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular aluminium wire, class 200
Safety of machinery - Electrical equipment of machines - Part 1: General requirements
Expression of performance of electrochemical analyzers - Part 4: Dissolved oxygen in water measured by membrane covered amperometric sensors
XML Exchange Formats for Programs according to IEC 61131-3
Safety of machinery - Application of protective equipment to detect the presence of persons
Security for industrial automation and control systems - Part 3-2: Security risk assessment and system design
Engineering data exchange format for use in industrial automation systems engineering - Automation markup language - Part 1: Architecture and general requirements
Field device integration (FDI) - Part 100: Profiles - Generic protocols
Field device integration (FDI) – Part 115-2: Profiles – Modbus-RTU
Reference conditions and procedures for testing industrial and process measurement transmitters - Part 3: Specific procedures for temperature transmitters
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-101: Safety requirements for in vitro diagnostic (IVD) medical equipment
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
Electroacoustics - Instruments for measurement of aircraft noise - Performance requirements for systems to measure sound pressure levels in noise certification of aircraft
236 ME 27 CLC/FprTS 50134-9:2018 5020
237 ME 27 EN 50136-1:2012/FprA1:2018 5020
238 ME 27 prEN 62676-2-32:2017 4020
239 ME 27 prEN 62676-2-31:2017 4020
240 ME 27 FprEN 62820-3-2:2017 5020
241 ME 30 prEN 55012:2017 4020
242 ME 30 prEN 55036:2017 4020
243 ME 30 EN 61000-2-2:2002/prA2:2017 4020
244 ME 35 prEN 60904-7:2017 4020
245 ME 35 prEN 60904-3:2017 4020
246 ME 35 prEN 62788-1-7:2017 4020
247 ME 35 prEN 62892:2017 Test procedure for extended thermal cycling of PV modules 4020
248 ME 36 prEN 60633:2018 4020
249 ME 36 EN 62747:2014/prA1:2018 4020
250 ME 36 EN 62751-2:2014/prA1:2018 4020
251 ME 39 FprEN 1395-5 5020
252 ME 39 FprEN 13507 5020
253 ME 39 FprEN ISO 14918 5020
254 ME 39 FprEN 17001 5020
255 ME 39 FprEN 17002 5020
256 ME 39 prEN ISO 20378 4020
Alarm systems - Social alarm systems - Part 9: IP Communications Protocol
Alarm systems - Alarm transmission systems and equipment - Part 1: General requirements for alarm transmission systems
Video surveillance systems for use in security applications - Part 2-32: Video transmission protocols - IP interoperability implementation based on Web services - Recording
Video surveillance systems for use in security applications - Part 2-31: Video transmission protocols - IP interoperability implementation based on Web services - Live streaming and configuration
Building intercom systems - Part 3-2: Application guidelines - Advanced security building intercom systems
Vehicles, boats and devices with internal combustion engines or traction batteries - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers
Electric and hybrid road vehicles - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers below 30 MHz
Electromagnetic compatibility (EMC) - Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems
Photovoltaic devices - Part 7: Computation of the spectral mismatch correction for measurements of photovoltaic devices
Photovoltaic devices - Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data
Measurement procedures for materials used in photovoltaic modules - Part 1-7: Test procedure for the optical durability of transparent polymeric PV packaging materials
Terminology for high-voltage direct current (HVDC) transmission
Terminology for voltage-sourced converters (VSC) for high-voltage direct current (HVDC) systems
Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 2: Modular multilevel converters
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 5: Plasma spraying in chambers
Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying
Thermal spraying - Qualification testing of thermal sprayers (ISO/FDIS 14918:2018)
Thermal spraying - Components with thermally sprayed coatings - Coating specification
Thermal spraying - Components with thermally sprayed coatings - Thermal spray procedure specification
Welding consumables - Rods for gas welding of non-alloy and creep-resisting steels - Classification (ISO 20378:2017)
257 ME 39 FprEN ISO 21904-3 5020
258 ME 40 prEN 12679 4020
259 ME 42 FprEN ISO 4829-1 5020
260 ME 42 prEN ISO 4885 4020
261 ME 42 prEN ISO 4945 4020
262 ME 42 prEN ISO 6892-2 4020
263 ME 42 prEN ISO 7500-1 4020
264 ME 42 EN 10139:2016/prA1 4020
265 ME 42 prEN 10225-4 4020
266 ME 42 FprEN 10277 Bright steel products - Technical delivery conditions 5020267 ME 42 prEN 10283 Corrosion resistant steel castings 4020268 ME 42 FprCEN/TR 10366 5020
269 ME 46 FprEN ISO 3923-1 5020
270 ME 46 FprEN ISO 4490 5020
271 ME 47 FprEN 1563 Founding - Spheroidal graphite cast irons 5020272 ME 56 FprEN ISO 9004 5020
273 ME 58 FprEN ISO 5458 5020
274 ME 58 prEN ISO 5459 4020
275 ME 59 FprEN 1114-3 5020
276 ME 59 prEN ISO 3506-1 4020
277 ME 59 prEN ISO 3506-2 4020
278 ME 59 FprEN 12012-1 5020
279 ME 66 FprEN 13451-11 5020
Health and safety in welding and allied processes - Requirements, testing and marking of equipment for air filtration - Part 3: Determination of the capture efficiency of on-torch welding fume extraction devices (ISO/FDIS 21904-3:2017)
Non destructive testing - Determination of the size of industrial radiographic sources - Radiographic method
Steel and cast iron - Determination of total silicon contents - Reduced molybdosilicate spectrophotometric method - Part 1: Silicon contents between 0,05 % and 1,0 % (ISO/FDIS 4829-1:2016)
Ferrous materials - Heat treatments - Vocabulary (ISO/FDIS 4885:2017)
Steel - Determination of nitrogen - Spectrophotometric method (ISO/DIS 4945:2017)
Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO/FDIS 6892-2:2017)
Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system (ISO/FDIS 7500-1:2017)
Cold rolled uncoated low carbon steel narrow strip for cold forming - Technical delivery conditions
Weldable structural steels for fixed offshore structures - Technical delivery conditions - Part 4: Cold formed welded hollow sections
Steel for the reinforcement of concrete - Weldable reinforcing steels - Reinforcement bars de-coiled by processor
Metallic powders - Determination of apparent density - Part 1: Funnel method (ISO/FDIS 3923-1:2018)
Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter) (ISO/FDIS 4490:2018)
Quality management - Quality of an organization - Guidance to achieve sustained success (ISO/FDIS 9004:2018)
Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification (ISO/FDIS 5458:2017)
Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO/DIS 5459.2:2017)
Plastics and rubber machines - Extruders and extrusion lines - Part 3: Safety requirements for haul-offs
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs with specified property classes - Coarse pitch thread and fine pitch thread (ISO/DIS 3506-1:2018)
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts with specified property classes - Coarse pitch thread and fine pitch thread (ISO/DIS 3506-2:2018)
Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators and shredders
Swimming pool equipment - Part 11: Additional specific safety requirements and test methods for moveable pool floors and moveable bulkheads
280 ME 66 prEN 14960-1 4020
281 ME 66 FprEN 17115 5020
282 ME 66 prEN 17206 4020
283 ME 66 FprCEN/TR 17207 5020
284 ME 77 FprEN 13525 Forestry machinery - Wood chippers - Safety 5020285 ME 78 prEN ISO 15118-1 4020
286 ME 78 prEN 16662-1 4020
287 ME 78 prEN 17186 4020
288 ME 78 FprEN ISO 18243 5020
289 ME 85 EN 81-28:2018 5020
290 ME 85 prEN 81-40 4020
291 ME 85 FprEN 81-71 5020
292 ME 85 prEN 1175 Safety of industrial trucks - Electrical/electronic requirements 4020
293 ME 85 prEN 1459-7 4020
294 ME 85 FprCEN/TS 1459-8 5020
295 ME 85 prEN 12016 4020
296 ME 85 EN 13001-3-5:2016/prA1 4020
297 ME 85 prEN 15011 Cranes - Bridge and gantry cranes 4020298 ME 85 prEN 16307-3 4020
299 ME 85 prEN 16307-2 4020
300 ME 85 prEN 16796-4 4020
301 ME 85 prEN ISO 24134 4020
302 ME 88 prEN 131-6 Ladders - Part 6: Telescopic ladders 4020303 ME 88 prEN 131-4 Ladders - Part 4: Single or multiple hinge-joint ladders 4020
Inflatable play equipment - Part 1: Safety requirements and test methods
Entertainment technology - Specifications for design and manufacture of aluminium and steel trusses
Entertainment Technology - Lifting and Load-bearing Equipment for Stages and other Production Areas within the Entertainment Industry - Specifications for general requirements (excluding aluminum and steel trusses and towers)
Playground and recreational areas - requirements for quality of inspections and competence of inspectors
Road vehicles - Vehicle to grid communication interface - Part 1: General information and use-case definition (ISO/DIS 15118-1:2017)
Road vehicles - Supplementary grip devices for tyres of passenger cars and light duty vehicles - Part 1 : General safety and performance requirements
Identification of vehicles and infrastructures compatibility - Graphical expression for consumer information on EV power supply
Electrically propelled mopeds and motorcycles - Test specifications and safety requirements for lithium-ion battery systems (ISO 18243:2017)
Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 28: Remote alarm on passenger and goods passenger lifts
Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 40: Stairlifts and inclined lifting platforms intended for persons with impaired mobility
Safety rules for the construction and installation of lifts - Particular applications to passenger lifts and goods passenger lifts - Part 71: Vandal resistant lifts
Rough-terrain trucks - Safety requirements and verification - Part 7: Test method and determination of noise emission
Rough-terrain trucks - Safety requirements and verification - Part 8: Variable-reach tractors
Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity
Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooks
Industrial trucks - Safety requirements and verification - Part 3 Supplementary requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads (additional requirements to EN 16307-1)
Industrial trucks - Safety requirements and verification - Part 2: Supplementary requirements for self-propelled variable-reach trucks
Energy efficiency of industrial trucks - Test methods - Part 4: Variable-reach rough-terrain trucks
Industrial trucks - Additional requirements for automated functions on trucks (ISO 24134:2006)
304 ME 89 EN 12516-4:2014/FprA1 5020
305 ME 89 EN 12516-1:2014/FprA1 5020
306 ME 102 prEN ISO 17226-2 4020
307 ME 102 prEN ISO 17226-1 4020
308 ME 102 FprEN ISO 20863 5020
309 ME 102 prEN ISO 22700 4020
310 ME 103 FprEN ISO 811 5020
311 ME 103 FprEN ISO 3175-4 5020
312 ME 103 prEN ISO 9092 Textiles - Nonwovens - Definition (ISO/DIS 9092:2018) 4020313 ME 103 prEN ISO 10325 4020
314 ME 103 FprEN ISO 15496 5020
315 ME 103 FprEN 16779-1 5020
316 ME 103 FprEN 16780 5020
317 ME 103 FprEN 16781 5020
318 ME 103 FprCEN/TR 17222 5020
319 ME 103 FprEN ISO 20418-1 5020
320 ME 105 prEN 12944-3 4020
321 ME 105 FprEN 17041 5020
322 ME 105 FprEN 17042 5020
323 ME 105 FprEN 17043 5020
324 ME 108 prEN ISO 307 Plastics - Polyamides - Determination of viscosity number 4020
325 ME 108 prEN 513 4020
326 ME 108 FprEN ISO 877-3 5020
Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells
Leather - Chemical determination of formaldehyde content - Part 2: Method using colorimetric analysis (ISO/DIS 17226-2:2017)
Leather - Chemical determination of formaldehyde content - Part 1: Method using high performance liquid chromatography (ISO/DIS 17226-1:2017)
Footwear - Test methods for stiffeners and toepuffs - Bondability (ISO/FDIS 20863:2017)
Leather - Measurement of the colour and colour difference of finished leather (ISO/DIS 22700:2017)
Textile - Determination of resistance to water penetration - Hydrostatic pressure test (ISO/FDIS 811:2018)
Textiles - Professional care, drycleaning and wetcleaning of fabrics and garments - Part 4: Procedure for testing performance when cleaning and finishing using simulated wetcleaning (ISO/FDIS 3175-4:2017)
Fibre ropes - High modulus polyethylene - 8-strand braided ropes, 12-strand braided ropes and covered ropes (ISO/DIS 10325:2018)
Textiles - Measurement of water vapour permeability of textiles for the purpose of quality control (ISO/FDIS 15496:2016)
Textile child care articles - Safety requirements and test methods for children's cot duvets - Part 1: Duvet (excluding duvet covers)
Textile child care articles - Safety requirements and test methods for children's cot bumpers
Textile child care articles - Safety requirements and test methods for children's sleep bags for use in a cot
Textile products and nanotechnologies - Guidance on tests to simulate nanoparticle release - Skin exposure
Textiles - Qualitative and quantitative proteomic analysis of some animal hair fibres - Part 1: Peptide detection using LC-ESI-MS with protein reduction (ISO/FDIS 20418-1:2018)
Fertilizers and liming materials - Vocabulary - Part 3: Terms relating to liming materials
Fertilizers - Determination of boron in concentrations ? 10 % using spectrometry with azomethine-H
Fertilizers - Determination of boron in concentrations > 10 % using acidimetric titration
Fertilizers - Determination of molybdenum in concentrations ? 10 % using spectrometry of a complex with ammonium thiocyanate
Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the resistance to artificial weathering
Plastics - Methods of exposure to solar radiation - Part 3: Intensified weathering using concentrated solar radiation (ISO/FDIS 877-3:2018)
327 ME 108 prEN 1519-1 4020
328 ME 108 prEN 1762 4020
329 ME 108 prEN ISO 11296-7 4020
330 ME 108 prEN ISO 11299-1 4020
331 ME 108 prEN ISO 11299-3 4020
332 ME 108 prEN ISO 11299-2 4020
333 ME 108 FprEN ISO 11357-3 5020
334 ME 108 FprEN ISO 11357-6 5020
335 ME 108 prEN ISO 13257 4020
336 ME 108 FprEN ISO 13259 5020
337 ME 108 EN 13476-3:2018 5020
338 ME 108 EN 13476-1:2018 5020
339 ME 108 EN 13476-2:2018 5020
340 ME 108 prEN 14243-2 4020
341 ME 108 prEN 14243-3 4020
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 1: Requirements for pipes, fittings and the system
Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes (ISO/DIS 11296-7:2018)
Plastics piping systems for renovation of underground gas supply networks - Part 1: General (ISO/DIS 11299-1:2018)
Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes (ISO/DIS 11299-3:2018)
Plastics piping systems for renovation of underground gas supply networks - Part 2: Lining with continuous pipes (ISO/DIS 11299-2:2018)
Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization (ISO/FDIS 11357-3:2017)
Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO/FDIS 11357-6:2017)
Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling (ISO/DIS 13257:2018)
Thermoplastics piping systems for underground non-pressure applications - Test method for leaktightness of elastomeric sealing ring type joints (ISO/DIS 13259:2017)
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1:General requirements and performance characteristics
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for pipes and fittings with smooth internal and external surface and the system, Type A
Materials obtained from end of life tyres - Part 2: Granulates and powders - Methods for determining their dimension(s) and impurities, including free steel and free textile content
Materials obtained from end of life tyres - Part 3: Shreds, cuts and chips - Methods for determining their dimension(s) including protruding filaments dimensions
342 ME 108 prEN 14243-1 4020
343 ME 108 prEN 14728 Imperfections in thermoplastic welds - Classification 4020344 ME 108 prEN ISO 15494 4020
345 ME 108 FprEN 15860 5020
346 ME 108 FprEN 16903 5020
347 ME 108 FprEN 16904 5020
348 ME 108 prEN 17176-1 4020
349 ME 108 prEN 17176-2 4020
350 ME 108 prEN 17176-5 4020
351 ME 108 prEN 17176-3 4020
352 ME 108 FprCEN/TS 17188 5020
353 ME 108 FprCEN/TS 17189 5020
354 ME 108 FprCEN/TR 17219 5020
355 ME 108 FprEN ISO 21225-1 5020
356 ME 108 FprEN ISO 21225-2 5020
357 ME 108 FprEN ISO 29988-2 5020
358 ME 108 FprEN ISO 29988-1 5020
359 ME 109 EN 1434-2:2015/prA1 Thermal energy meters - Part 2: Constructional requirements 4020
Materials obtained from end of life tyres - Part 1: General definitions related to the methods for determining their dimension(s) and impurities
Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system (ISO 15494:2015)
Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
Plastics piping systems - Environmental product declarations - Product Category Rules complementary to EN 15804, for buried plastics piping systems
Plastics piping systems - Environmental product declarations - Product Category rules complementary to EN 15804, for plastic piping systems inside buildings
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 1: General
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 2: Pipes
Plastic piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 5: Fitness for purpose of the system
Plastic piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 3: Fittings
Materials obtained from end of life tyres (ELTs) - Sampling method for granulates and powders stored in big-bags
Materials obtained from end of life tyres (ELTs) - Determination of the true density of granulates - Method based on water pycnometry
Plastics - Biodegradable thermoplastic mulch films for use in agriculture and horticulture - Guide for the quantification of alteration of films
Plastics piping systems for the trenchless replacement of underground pipeline networks - Part 1: Replacement on the line by pipe bursting and pipe extraction (ISO/FDIS 21225-1:2017)
Plastics piping systems for the trenchless replacement of underground pipeline networks - Part 2: Replacement off the line by horizontal directional drilling and impact moling (ISO/FDIS 21225-2:2017)
Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO/FDIS 29988-2:2018)
Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO/FDIS 29988-1:2018)
360 ME 109 EN 1434-6:2015/prA1 4020
361 ME 109 EN 1434-1:2015/prA1 Thermal energy meters - Part 1: General requirements 4020362 ME 109 EN 1434-5:2015/prA1 Thermal energy meters - Part 5: Intitial verification tests 4020363 ME 109 EN 1434-4:2015/prA1 Thermal energy meters - Part 4: Pattern approval tests 4020364 ME 109 prEN 12405-1 Gas meters - Conversion devices - Part 1: Volume conversion 4020
365 ME 109 prEN 13757-4 4020
366 ME 109 EN 13757-7:2018 5020
367 ME 109 EN 13757-3:2018 5020
368 ME 109 EN 13757-2:2018 5020
369 ME 109 FprCEN/TS 17171 Management of observed hydrometric data - Guidance 5020370 ME 118 prEN 844 Round and sawn timber - Terminology 4020371 ME 118 prEN 1130 4020
372 ME 118 FprEN 13756 Wood flooring and parquet - Terminology 5020373 ME 118 FprEN 16770 5020
374 ME 118 FprCEN/TS 16818 5020
375 ME 118 prEN 17191 4020
376 ME 118 prEN 17214 Visual assessment of furniture surfaces 4020377 ME 118 FprEN ISO 19085-4 5020
378 ME 119 prEN 14175-3 Fume cupboards - Part 3: Type test methods 4020379 ME 119 prEN ISO 20504 4020
380 ME 125 EN 71-3:2013+A2:2017/prA3 Safety of toys - Part 3: Migration of certain elements 4020381 ME 125 EN 1400:2013+A1:2014/FprA2 5020
382 ME 125 FprEN 1888-1 5020
383 ME 125 FprEN 1888-2 5020
384 ME 125 FprCEN/TR 13387-3 5020
385 ME 125 FprCEN/TR 13387-2 5020
386 ME 125 FprCEN/TR 13387-5 5020
387 ME 125 FprCEN/TR 15371-2:2017 5020
388 ME 125 FprCEN/TR 15371-2:2017 5020
389 ME 125 EN 16232:2013/FprA1:2018 Child use and care articles - Infant swings 5020390 ME 125 prEN 17072 4020
391 ME 128 prEN 60255-181:2018 4020
392 ME 128 FprEN 62246-1-1:2017 5020
Thermal energy meters - Part 6: Installation, commissioning, operational monitoring and maintenance
Communication systems for meters - Part 4: Wireless M-Bus communication
Communication systems for meters - Part 7: Transport and security services
Communication systems for meters - Part 3: Application protocols
Communication systems for meters - Part 2: Wired M-Bus communication
Children's Furniture - Cribs and cradles - Safety requirements and test methods
Safety of woodworking machines - Chip and dust extraction systems for indoor installation - Safety requirements
Durability of wood and wood-based products - Moisture dynamics of wood and wood-based products
Children’s Furniture - Seating for children - Safety requirements and test methods
Woodworking machines - Safety - Part 4: Vertical panel circular sawing machines (ISO/FDIS 19085-4:2017)
Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at room temperature - Determination of compressive behaviour (ISO/DIS 20504:2017)
Child use and care articles - Soothers for babies and young children - Safety requirements and test methods
Child use and care articles - Wheeled child conveyances - Part 1: Pushchairs and prams
Child care articles - Wheeled child conveyances - Part 2: Pushchairs for children above 15 kg up to 22 kg
Child care articles - General safety guidelines - Part 3: Mechanical hazards
Child care articles - General safety guidelines - Part 2: Chemical hazards
Child care articles - General safety guidelines - Part 5: Product information
Safety of toys - Interpretations - Part 2: Replies to requests for interpretation of the chemical standards in the EN 71-series
Safety of toys - Interpretations - Part 2: Replies to requests for interpretation of the chemical standards in the EN 71-series
Child care articles - Bath tubs, stands and non-standalone bathing aids - Safety requirements and test methods
Measuring relays and protection equipment - Part 181: Functional requirements for frequency protection
Reed switches - Part 1-1: Generic specification - Blank detail specification
393 ME 129 FprEN 60974-9:2018 Arc welding equipment - Part 9: Installation and use 5020394 ME 129 prEN 60974-14:2018 Arc welding equipment - Part 14: Performance verification 4020
395 ME 129 prEN 60974-5:2018 Arc welding equipment - Part 5: Wire feeders 4020396 ME 129 prEN 60974-7:2018 Arc welding equipment - Part 7:Torches 4020397 ME 129 prEN 60974-2:2018 Arc welding equipment - Part 2: Liquid cooling systems 4020398 ME 129 prEN 60974-3:2018 4020
399 ME 131 EN 60061-4:1992/FprA16:2018 5020
400 ME 131 EN 60081:1998/A11:2018 5020
401 ME 131 prEN 60969:2017 4020
402 ME 131 FprEN 61167:2017 Metal halide lamps - Performance specification 5020403 ME 131 FprEN 61347-2-14:2017 5020
404 ME 131 FprEN 62031:2017 LED modules for general lighting - Safety specifications 5020405 ME 131 EN 62386-103:2014/prA1:2017 4020
406 ME 131 EN 62386-102:2014/prA1:2017 4020
407 ME 131 EN 62386-101:2014/prA1:2017 4020
408 ME 131 FprEN 62386-217:2018 5020
409 ME 131 FprEN 62386-218:2018 5020
410 ME 131 prEN 62386-220:2018 4020
411 ME 131 FprEN 62386-216:2018 5020
412 ME 131 FprEN 62386-222:2018 5020
413 ME 131 FprEN 62386-207:2018 5020
414 ME 131 EN 62504:2014/FprA1:2017 5020
415 ME 131 EN 62560:2012/prAA:2017 4020
416 ME 131 EN 62717:2017/prA2:2017 LED modules for general lighting - Performance requirements 4020
417 ME 135 prEN 60286-3:2018 4020
418 ME 135 prEN 60384-17:2018 4020
419 ME 135 prEN 60384-21:2018 4020
420 ME 135 prEN 60384-22:2018 4020
Arc welding equipment - Part 3: Arc striking and stabilizing devices
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information
Double-capped fluorescent lamps - Performance specifications
Self-ballasted compact fluorescent lamps for general lighting services - Performance requirements
Lamp controlgear - Part 2-14: Particular requirements for DC and/or AC supplied electronic controlgear for fluorescent induction lamps
Digital addressable lighting interface - Part 103: General requirements - Control devices
Digital addressable lighting interface - Part 102: General requirements - Control gear
Digital addressable lighting interface - Part 101: General requirements - System components
Digital addressable lighting interface - Part 217: Particular requirements for control gear - Thermal gear protection (device type 16)
Digital addressable lighting interface - Part 218: Particular requirements for control gear - Dimming Curve Selection (device type 17)
Digital addressable lighting interface - Part 220: Particular requirements for control gear - Centrally Supplied DC Emergency Operation (device type 19)
Digital addressable lighting interface - Part 216: Particular requirements for control gear - Load referencing (device type 15)
Digital addressable lighting interface - Part 222: Particular requirements for control gear - Thermal lamp protection (device type 21)
Digital addressable lighting interface - Part 207: Particular requirements for control gear - LED modules (device type 6)
General lighting - Light emitting diode (LED) products and related equipment - Terms and definitions
Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications
Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes
Fixed capacitors for use in electronic equipment - Part 17: Sectional specification: Fixed metallized polypropylene film dielectric a.c. and pulse capacitors
Fixed capacitors for use in electronic equipment - Part 21: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1
Fixed capacitors for use in electronic equipment - Part 22: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2
421 ME 140 EN 61850-4:2011/prA1:2017 4020
422 ME 140 prEN 61968-4:2017 4020
423 ME 140 FprEN 61970-456:2017 5020
424 ME 140 FprEN 61970-302:2018 5020
425 ME 140 FprEN 62325-301:2017 5020
426 ME 140 FprEN 62325-451-6:2018 5020
427 ME 140 prEN 62325-503:2018 4020
428 ME 144 prEN 31010:2017 Risk management - Risk assessment techniques 4020429 ME 145 prEN 60297-3-110:2017 4020
430 ME 145 prEN 60512-1:2017 4020
431 ME 145 prEN 60512-99-002:2017 4020
432 ME 145 prEN 60512-28-100:2017 4020
433 ME 145 EN 60603-7:2009/prA2:2017 4020
434 ME 145 prEN 61076-2-114:2017 4020
435 ME 145 EN 61076-1:2006/prA1:2017 4020
436 ME 145 prEN 61076-3-124:2018 4020
437 ME 147 prEN 12102-2 4020
438 ME 147 FprEN ISO 21012 Cryogenic vessels - Hoses (ISO/FDIS 21012:2017) 5020439 ME 152 EN 13445-2:2014/prA6 Unfired pressure vessels - Part 2: Materials 4020440 ME 152 EN 13445-3:2014/prA8 Unfired pressure vessels - Part 3: Design 4020441 ME 152 EN 13445-5:2014/prA2 Unfired pressure vessels - Part 5: Inspection and testing 4020
442 ME 154 prEN ISO 9902-6 4020
Communication networks and systems for power utility automation - Part 4: System and project management
Application integration at electric utilities - System interfaces for distribution management - Part 4: Interfaces for records and asset management
Energy management system application program interface (EMS-API) - Part 456: Solved power system state profiles
Energy Management System Application Program Interface (EMS-API) - Part 302: Common information model (CIM) dynamics
Framework for energy market communications - Part 301: Common information model (CIM) extensions for markets
Framework for energy market communications - Part 451-6: Publication of information on market, contextual and assembly models for European-style markets
Framework for energy market communications - Part 503: Market data exchanges guidelines for the IEC 62325-351 profile
Mechanical structures for electrical and electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) Series - Part 110: residential racks and cabinets for smart houses
Connectors for electronic equipment - Tests and measurements - Part 1: General
Connectors for electronic equipment - tests and measurements - Part 99-002: Endurance test schedules - Test 99b, Test schedule for unintended unmating under electrical load
Connectors for electronic equipment - Tests and measurements - Part 28-100: Signal integrity tests up to 1 000 MHz on IEC 60603-7 and IEC 61076-3 series connectors - Tests 28a to 28g
Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors
Connectors for electronic equipment - Product requirements - Part 2-114: Circular connectors - Detail specification for data and power connectors with M8 screw-locking
Connectors for electronic equipment - Product requirements - Part 1: Generic specification
Connectors for electronic equipment - product requirements - Part 3-124: Rectangular connectors - Detail specification for 10way, shielded, free and fixed rectangular connectors for I/O and data transmission capability with frequencies up to 500 MHz
Air conditioners, liquid chilling packages, heat pumps and dehumidifiers with electrically driven compressors - Determination of the sound power level - Part 2: Heat pump water heaters
Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery (ISO/DIS 9902-6:2018)
443 ME 157 FprEN ISO 2081 5020
444 ME 157 prEN ISO 4531 4020
445 ME 157 prEN ISO 7539-6 4020
446 ME 157 prEN ISO 11177 4020
447 ME 160 EN 62153-4-7:2016/FprA1:2018 5020
448 ME 161 prEN 62282-3-100:2017 4020
449 ME 161 prEN 62282-6-400:2018 4020
450 ME 161 FprEN 62485-2:2017 5020
451 ME 161 FprEN 62485-4:2017 5020
452 ME 161 FprEN 62485-1:2017 5020
453 ME 161 prEN 62660-1:2017 4020
454 ME 161 prEN 62660-2:2017 4020
455 ME 161 prEN 62902:2018 4020
456 ME 161 prEN 62932-2-1:2017 4020
457 ME 161 prEN 62932-1:2017 4020
458 ME 161 prEN 62932-2-2:2017 4020
459 ME 161 FprEN 62933-1:2017 Electrical Energy Storage (EES) systems - Part 1: Vocabulary 5020
460 ME 162 FprEN 60071-2:2017 5020
461 ME 166 prEN 60051-9:2018 4020
462 ME 167 EN 50160:2010/prA2:2017 4020
463 ME 167 EN 50160:2010/prA3:2017 4020
464 ME 169 prEN ISO 10426-3 4020
Metallic and other inorganic coatings - Electroplated coatings of zinc with supplementary treatments on iron or steel (ISO/FDIS 2081:2017)
Vitreous and porcelain enamels - Migration from enamelled ware in contact with food - Method of test and permissible limits (ISO/DIS 4531:2017)
Corrosion of metals and alloys - Stress corrosion testing - Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement (ISO/DIS 7539-6:2017)
Vitreous and porcelain enamels - Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply - Quality requirements and testing (ISO/DIS 11177:2018)
Metallic communication cable test methods - Part 4-7: Electromagnetic compatibility (EMC) - Test method for measuring of transfer impedance ZT and screening attenuation aS or coupling attenuation aC of connectors and assemblies up to and above 3 GHz - Triaxial tube in tube method
Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety
Fuel cell technologies - Part 6-400: Micro fuel cell power systems - Power and data interchangeability
Safety requirements for secondary batteries and battery installations - Part 2: Stationary batteries
Safety requirements for secondary batteries and battery installations - Part 4: Valve-regulated lead-acid batteries for use in portable appliances
Safety requirements for secondary batteries and battery installations - Part 1: General safety information
Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 1: Performance testing
Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 2: Reliability and abuse testing
Secondary batteries: Marking symbols for identification of their chemistry
Flow Battery Energy Systems for Stationary applications - Part 2-2: Performance general requirements and test methods
Flow battery systems for stationary applications - Part 1: Terminology
Flow Battery Systems for Stationary applications - Part 2-2: Safety requirements
Insulation co-ordination - Part 2: Application guidelines (Proposed horizontal standard)
Direct acting indicating analogue electrical-measuring instruments and their accessories - Part 9: Recommended test methods
Voltage characteristics of electricity supplied by public electricity networks
Voltage characteristics of electricity supplied by public electricity networks
Petroleum and natural gas industries - Cements and materials for well cementing - Part 3: Testing of deepwater well cement formulations (ISO/DIS 10426-3:2018)
465 ME 169 prEN ISO 10426-4 4020
466 ME 169 FprEN ISO 10855-3 5020
467 ME 169 FprEN ISO 10855-1 5020
468 ME 169 FprEN ISO 10855-2 5020
469 ME 169 FprEN 12285-1 5020
470 ME 169 EN 13480-1:2017/prA1:2017 Metallic industrial piping - Part 1: General 4020471 ME 169 prEN 14015 4020
472 ME 169 prEN ISO 19345-2 4020
473 ME 169 prEN ISO 19900 4020
474 ME 169 prEN ISO 19901-7 4020
475 ME 169 prEN ISO 19904-1 4020
476 ME 171 EN 485-2:2016/prA1 4020
477 ME 171 prEN ISO 2085 4020
478 ME 171 prEN ISO 2376 4020
479 ME 171 prEN ISO 3211 4020
480 ME 171 prEN ISO 6581 4020
481 ME 171 prEN ISO 8993 4020
482 ME 171 prEN ISO 8994 4020
483 ME 171 prEN 14726 4020
Petroleum and natural gas industries - Cements and materials for well cementing - Part 4: Preparation and testing of foamed cement slurries at atmospheric pressure (ISO/DIS 10426-4:2018)
Offshore containers and associated lifting sets - Part 3: Periodic inspection, examination and testing (ISO/FDIS 10855-3:2018)
Offshore containers and associated lifting sets - Part 1: Design, manufacture and marking of offshore containers (ISO/FDIS 10855-1:2018)
Offshore containers and associated lifting sets - Part 2: Design, manufacture and marking of lifting sets (ISO/FDIS 10855-2:2018)
Workshop fabricated steel tanks - Part 1: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and nonflammable water polluting liquids other than for heating and cooling of buildings
Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above
Petroleum and natural gas industry - Pipeline transportation systems -Pipeline integrity management specification - Part 2: Full-life cycle integritymanagement for offshore pipeline (ISO/DIS 19345-2:2017)
Petroleum and natural gas industries - General requirements for offshore structures (ISO/DIS 19900:2018)
Petroleum and natural gas industries - Specific requirements for offshore structures - Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units (ISO/DIS 19901-7:2017)
Petroleum and natural gas industries - Floating offshore structures - Part 1: Ship-shaped, semi-submersible, spar and shallow-draught cylindrical structures (ISO/DIS 19904-1:2017)
Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties
Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test (ISO/DIS 2085:2017)
Anodizing of aluminium and its alloys - Determination of electric breakdown potential (ISO/DIS 2376:2017)
Anodizing of aluminium and its alloys - Assessment of resistance of anodic oxidation coatings to cracking by deformation (ISO/DIS 3211:2017)
Anodizing of aluminium and its alloys - Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings (ISO/DIS 6581:2017)
Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Chart method (ISO/DIS 8993:2017)
Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Grid method (ISO/DIS 8994:2017)
Aluminium and aluminium alloys - Determination of the chemical composition of aluminium and aluminium alloys by spark optical emission spectrometry
484 ME 175 prEN 61340-6-1:2017 4020
485 ME 193 prEN 61188-6-4:2018 4020
486 ME 193 prEN 61189-2-630:2017 4020
487 ME 193 prEN 61191-1:2018 4020
488 ME 201 prEN 16480 4020
489 ME 201 prEN 17038-3 4020
490 ME 201 prEN ISO 20361 4020
491 ME 202 prEN 598 4020
492 ME 202 prEN ISO 6149-1 4020
493 ME 202 prEN 10253-2 4020
494 ME 202 prEN 10253-4 4020
495 ME 202 prEN 15655-1 4020
496 ME 218 prEN 1009-3 4020
497 ME 218 prEN 1009-1 4020
498 ME 218 prEN 1009-5 4020
499 ME 218 prEN 1009-2 4020
500 ME 218 prEN 1009-4 4020
501 ME 218 FprEN 15597-1 5020
Electrostatics - Part 6-1: Electrostatic control for healthcare - General requirements for facilities
Printed boards and printed board assemblies - Design and use - Part 6-4: Generic requirements for dimensional drawings of SMD from viewpoint of land-pattern design
Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 2-630: Test methods for base materials for rigid printed boards - Moisture Absorption after pressure vessel conditioning
Printed board assemblies - Part 1: Generic specification - Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies
Pumps - Rotodynamic Pumps - Minimum required efficiency of water pumps and methods of qualification and verification
Pumps - Rotodynamic Pumps - Energy efficiency Index - Methods of qualification and verification - Part 3: Testing and calculation of ener-gy efficiency index (EEI) of booster sets
Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy (ISO/DIS 20361:2018)
Coated and lined ductile iron pipes, fittings and their joints for sewerage and drainage applications - Products characteristics and test and assessment methods
Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring seal (ISO/DIS 6149-1:2018)
Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements
Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 1: Polyurethane lining of pipes and fittings
Machines for mechanical processing of minerals and similar solid materials - Safety - Part 3: Specific requirements for crushing and milling machinery
Machines for mechanical processing of minerals and similar solid materials - Safety - Part 1: Common requirements for partly completed machinery and processing plants
Machines for mechanical processing of minerals and similar solid materials - Safety - Part 5: Specific requirements for cleaning, recycling, sorting and mud treatment machinery
Machines for mechanical processing of minerals and similar solid materials - Safety - Part 2: Specific requirements for feeding machinery and continuous handling equipment
Machines for mechanical processing of minerals and similar solid materials - Safety - Part 4: Specific requirements for screening machinery
Winter maintenance equipment - Spreading and spraying machines - Part 1: General requirements and definitions
502 ME 218 FprEN 15597-2 5020
503 ME 221 prEN ISO 7263-1 4020
504 ME 221 prEN ISO 7263-2 4020
505 ME 221 prEN ISO 12625-1 4020
506 ME 225 prEN 416 4020
507 ME 225 prEN 419 4020
508 ME 225 prEN 12953-5 4020
509 ME 225 prEN 13203-2 4020
510 ME 225 FprEN 13203-6 5020
511 ME 225 FprEN 13203-5 5020
512 ME 225 prEN 17175 4020
513 ME 230 FprEN ISO 11979-7 5020
514 ME 230 FprEN ISO 11979-10 5020
515 ME 230 prEN ISO 11979-1 4020
516 ME 231 EN 1440:2016/prA1:2017 4020
517 ME 231 FprEN 12542 5020
518 ME 231 FprEN 12807 5020
519 ME 231 prEN 12817 4020
520 ME 231 prEN 12819 4020
521 ME 231 prEN 13175 4020
522 ME 231 EN 14071:2015/prA1 4020
523 ME 231 prEN ISO 14245 4020
Winter maintenance equipment - Spreading and spraying machines - Part 2: Requirements for distribution and their test
Corrugating medium - Determination of the flat crush resistance after laboratory fluting - Part 1: A-flute (ISO/DIS 7263-1:2017)
Corrugating medium - Determination of the flat crush resistance after laboratory fluting - Part 2: B-flute (ISO/DIS 7263-2:2017)
Tissue paper and tissue products - Part 1: Vocabulary (ISO/DIS 12625-1:2017)
Gas-fired overhead radiant tube heaters and radiant tube heater systems for non-domestic use - Safety and energy efficiency
Gas-fired overhead luminous radiant heaters for non-domestic use - Safety and energy efficiency
Shell boilers - Part 5: Inspection during construction, documentation and marking of pressure parts of the boiler
Gas-fired domestic appliances producing hot water - Part 2: Assessment of energy consumption
Gas-fired domestic appliances producing hot water - Part 6: Assessment of energy consumption of adsorption and absorption heat pumps
Gas-fired domestic appliances producing hot water - Part 5: Assessment of energy consumption of gas fired appliances combined with electrical heat pump
Gas-fired overhead radiant strip heaters and multi-burner continuous radiant tube heater systems for non-domestic use - Safety and energy efficiency
Ophthalmic implants - Intraocular lenses - Part 7: Clinical investigations of intraocular lenses for the correction of aphakia (ISO/FDIS 11979-7:2017)
Ophthalmic implants - Intraocular lenses - Part 10: Clinical investigations of intraocular lenses for correction of ametropia in phakic eyes (ISO/FDIS 11979-10:2017)
Ophthalmic implants - Intraocular lenses - Part 1: Vocabulary (ISO/DIS 11979-1:2018)
LPG equipment and accessories - Transportable refillable traditional welded and brazed steel Liquefied Petroleum Gas (LPG) cylinders - Periodic inspection
LPG equipment and accessories - Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m3 - Design and manufacture
LPG equipment and accessories - Transportable refillable brazed steel cylinders for liquefied petroleum gas (LPG) - Design and construction
LPG Equipment and accessories - Inspection and requalification of LPG pressure vessels up to and including 13 m3
LPG equipment and accessories - Inspection and requalification of LPG pressure vessels greater than 13 m3
LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings
LPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Ancillary equipment
Gas cylinders - Specifications and testing of LPG cylinder valves - Self-closing (ISO/DIS 14245:2018)
524 ME 231 FprCEN/TR 14473 5020
525 ME 231 prEN 15202 4020
526 ME 231 prEN ISO 15995 4020
527 ME 231 prEN 16652-2 4020
528 ME 238 FprEN 50594 5020
529 ME 238 FprEN 50640 5020
530 ME 238 CLC/FprTR 50674 5020
531 ME 238 EN 60675:1995/prA2:2017 4020
532 ME 238 prEN 60704-3:2018 4020
533 ME 238 EN 60704-2-14:2013/prA1:2018 4020
534 ME 238 prEN 60704-3:2018/prAA:2018 4020
535 ME 238 EN 60705:2015/FprA2:2018 5020
536 ME 238 prEN 60879:2017 4020
537 ME 238 prEN 62885-6:2017 4020
538 ME 239 prEN 50679 4020
539 ME 239 EN 60335-2-30:2009/prAC:2017 4020
540 ME 239 FprEN 60335-2-97:2017 5020
541 ME 239 FprEN 60335-2-114:2018 5020
542 ME 239 FprEN 60335-2-86:2018 5020
543 ME 264 prEN 62961:2017 4020
544 ME 270 prEN 12726 4020
545 ME 270 FprEN 13317 5020
Transportable gas cylinders - Porous materials for acetylene cylinders
LPG equipment and accessories - Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections
Gas cylinders - Specifications and testing of LPG cylinder valves - Manually operated (ISO/DIS 15995:2018)
LPG equipment and accessories - Automotive LPG vehicles workshops - Part 2: Personnel competence and training
Household and similar electric appliances - Methods for measuring the performance of tumble dryers intended for commercial use
Household and similar electric appliances - Methods for measuring the performance of clothes washing machines intended for commercial use
Guidelines for the verification of household appliances under energy labelling and eco design
Household electric direct-acting room heaters - Methods for measuring performance
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 3: Procedure for determining and verifying declared noise emission values
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-14: Particular requirements for refrigerators, frozen-food storage cabinets and food freezers
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 3: Procedure for determining and verifying declared noise emission values
Household microwave ovens - Methods for measuring performance
Comfort fans and regulators for household and similar purposes - Methods for measuring performance
Surface cleaning appliances - Part 6: Wet hard floor cleaning appliances for household or similar use - Methods for measuring the performance
Household and similar electrical appliances with a radio communication interface and/or a radio determination interface - Safety
Household and similar electrical appliances - Safety - Part 2-30: Particular requirements for room heaters
Household and similar electrical appliances - Safety - Part 2-97: Particular requirements for drives for shutters, awnings, blinds and similar equipment
Household and similar electrical appliances - Safety - Part 2-114: Particular requirements for selfbalancing personal transport devices for use with batteries containing alkaline or other non-acid electrolytes
Household and similar electrical appliances - Safety - Part 2-86: Particular requirements for electric fishing machines
Insulating liquids - Test methods for the determination of interfacial tension of insulating liquids - Determination with the ring method
Packaging - Cork mouth finish with a bore diameter of 18,5 mm for corks and tamper evident capsules
Tanks for transport of dangerous goods - Service equipment for tanks - Manhole cover assembly
546 ME 270 prEN 14025 4020
547 ME 270 prEN 14564 Tanks for the transport of dangerous goods - Terminology 4020
548 ME 270 FprEN 14596 5020
549 ME 270 FprEN 17110 5020
550 ME 270 prEN 17177 4020
551 ME 298 prEN 1656 4020
552 ME 298 FprEN 13704 5020
553 ME 298 EN 16437:2014/prA1 4020
554 ME 305 prEN 30-1-1 4020
555 ME 305 prEN 13611 4020
556 ME 311 5020
557 ME 320 prEN 589 Automotive fuels - LPG - Requirements and test methods 4020
558 ME 320 prEN ISO 3104 4020
559 ME 320 prEN ISO 3405 4020
560 ME 320 EN 14214:2012+A1:2014/prA2 4020
561 ME 320 CEN/TR 15993:2018 5020
562 ME 320 prEN 17178 4020
563 ME 320 prEN 17181 4020
564 ME 324 prEN ISO 10581 4020
565 ME 324 prEN 14215 4020
Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction
Tanks for transport of dangerous goods - Service equipment for tanks - Emergency pressure relief valve
Tanks for transport of dangerous goods - Service equipment for tanks - Vapour manifold vent valve
Glass packaging - Crown cap - 26 mm intermediate depth crown cap
Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in the veterinary area - Test method and requirements (phase 2, step 1)
Chemical disinfectants - Quantitative suspension test for the evaluation of sporicidal activity of chemical disinfectants used in food, industrial, domestic and institutional areas - Test method and requirements (phase 2, step 1)
Chemical disinfectants and antiseptics - Quantitative surface test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in veterinary area on porous surfaces without mechanical action - Test method and requirements (phase 2, step 2)
Domestic cooking appliances burning gas - Part 1-1: Safety - General
Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
FprEN 61643-31:2017/FprAA:2017
Low-voltage surge protective devices - Part 31: Surge protective devices connected to the d.c. side of photovoltaic installations - Requirements and test methods
Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO/DIS 3104:2017)
Petroleum and related products from natural or synthetic sources - Determination of distillation characteristics at atmospheric pressure (ISO/DIS 3405:2017)
Liquid petroleum products - Fatty acid methyl esters (FAME) for use in diesel engines and heating applications - Requirements and test methods
Automotive fuels - Ethanol (E85) automotive fuel - Background to the parameters required and their respective limits and determination
Liquid petroleum products - Determination of the total volatile sulfur content in liquefied petroleum gases by ultraviolet fluorescence
Lubricants - Determination of aerobic biological degradation of fully formulated lubricants in an aqueous solution - Test method based on CO2-production
Resilient floor coverings - Homogeneous poly(vinyl chloride) floor covering - Specifications (ISO/DIS 10581:2018)
Textile floor coverings - Classification of machine-made rugs and runners
566 ME 333 prEN 50436-4 4020
567 ME 336 prEN 1047-1 4020
568 ME 336 prEN 1047-2 4020
569 ME 336 prEN 15659 4020
570 ME 338 prEN ISO 150 4020
571 ME 338 prEN 927-10 4020
572 ME 338 FprEN 927-6 5020
573 ME 338 prEN ISO 3681 4020
574 ME 338 prEN ISO 8504-3 4020
575 ME 338 prEN ISO 11126-7 4020
576 ME 338 FprEN ISO 12944-5 5020
577 ME 338 prEN ISO 18314-3 4020
578 ME 338 prEN ISO 18314-1 4020
579 ME 338 prEN ISO 18314-2 4020
580 ME 338 prEN ISO 18473-1 4020
581 ME 357 FprCEN/TR 17238 5020
582 ME 373 prEN ISO 20700 4020
583 ME 388 CEN/TR 17014-101:2018 5020
584 ME 388 CEN/TR 17015-101:2018 5020
585 ME 388 FprCEN/TR 17016-101:2018 5020
586 ME 390 prEN ISO/ASTM 52911-1 4020
Alcohol interlocks - Test methods and performance requirements - Part 4: Connectors for the electrical connection between the alcohol interlock and the vehicle
Secure storage units - Classification and methods of test for resistance to fire - Part 1: Data cabinets and diskette inserts
Secure storage units - Classification and methods of test for resistance to fire - Part 2: Data rooms and data container
Secure storage units - Classification and methods of test for resistance to fire - Light fire storage units
Raw, refined and boiled linseed oil for paints and varnishes - Specifications and methods of test (ISO/DIS 150:2018)
Paints and varnishes - Coating materials and coating systems for exterior wood - Part 10: Resistance to blocking of paints and varnishes on wood
Paints and varnishes - Coating materials and coating systems for exterior wood - Part 6: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water
Binders for paints and varnishes - Determination of saponification value - Titrimetric method (ISO/DIS 3681:2018)
Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 3: Hand- and power-tool cleaning (ISO/DIS 8504-3:2017)
Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide (ISO/DIS 11126-7:2017)
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 5: Protective paint systems (ISO/FDIS 12944-5:2017)
Analytical colorimetry - Part 3: Special indices (ISO 18314-3:2015)
Analytical colorimetry - Part 1: Practical colour measurement (ISO 18314-1:2015)
Analytical colorimetry - Part 2: Saunderson correction, solutions of the Kubelka-Munk equation, tinting strength, hiding power (ISO 18314-2:2015)
Functional pigments and extenders for special applications - Part 1: Nanoscale calcium carbonate for sealant application (ISO 18473-1:2015)
Proposed limit values for contaminants in biomethane based on health assessment criteria
Guidelines for management consultancy services (ISO 20700:2017)
Electronic public procurement - Business interoperability interfaces (BII), e-Tendering - Part 101: Overview
Electronic public procurement - Business interoperability interfaces (BII), e-Catalogue - Part 101: Overview
Electronic public procurement - Business interoperability interfaces (BII), e-Ordering - Part 101: Overview
Additive manufacturing - Technical Design Guideline for Powder Bed Fusion - Part 1: Laser-based Powder Bed Fusion of metals (ISO/ASTM DIS 52911-1:2017)
587 ME 390 prEN ISO/ASTM 52911-2 4020
588 MEN 173 FprEN 60375:2018 Conventions concerning electric circuits 5020589 MEN 359 prEN ISO 19112 4020
590 MEN 359 EN ISO 19115-1:2014/A1:2018 5020
591 MEN 359 FprEN ISO 19115-2 5020
592 MM 53 FprEN 689 5020
593 MM 53 FprCEN/TS 17198 5020
594 MM 53 prEN 17199-4 4020
595 MM 53 prEN 17199-1 4020
596 MM 53 prEN 17199-3 4020
597 MM 53 prEN 17199-2 4020
598 MM 53 prEN 17199-5 4020
599 MM 323 prEN ISO 14024 4020
600 MM 323 prEN ISO 14064-3 4020
601 MM 323 prEN ISO 14067 4020
602 MM 360 prEN 1501-2 4020
603 MM 360 prEN 1501-3 4020
604 MM 360 prEN 1501-5 4020
605 MM 360 prEN 1501-1 4020
606 MM 360 FprEN ISO 11260 5020
Additive manufacturing - Technical Design Guideline for Powder Bed Fusion - Part 2: Laser-based Powder Bed Fusion of Polymers (ISO/ASTM DIS 52911-2:2017)
Geographic information - Spatial referencing by geographic identifiers (ISO/DIS 19112:2018)
Geographic information - Metadata - Part 1: Fundamentals - Amendment 1 (ISO 19115-1:2014/Amd 1:2018)
Geographic information - Metadata - Part 2: Extensions for acquisition and processing (ISO/FDIS 19115-2:2017)
Workplace exposure - Measurement of exposure by inhalation to chemical agents - Strategy for testing compliance with occupational exposure limit values
Stationary source emissions - Predictive Emission Monitoring Systems (PEMS) - Applicability, execution and quality assurance
Workplace exposure - Measurement of dustiness of bulk materials that contain or release nano-objects or submicrometer particles - Part 4: Small rotating drum method
Workplace exposure - Measurement of dustiness of bulk materials that contain or release nano-objects or submicrometer particles - Part 1: Requirements and choice of test methods
Workplace exposure - Measurement of dustiness of bulk materials that contain or release nano-objects or submicrometer particles - Part 3: Continuous drop method
Workplace exposure - Measurement of dustiness of bulk materials that contain or release nano-objects or submicrometer particles - Part 2: Rotating drum method
Workplace exposure - Measurement of dustiness of bulk materials that contain or release nano-objects or submicrometer particles - Part 5: Vortex shaker method
Environmental labels and declarations - Type I environmental labelling - Principles and procedures (ISO/FDIS 14024:2017)
Greenhouse gases - Part 3: Specification with guidance for the verification and validation of greenhouse gas statements (ISO/DIS 14064-3:2017)
Greenhouse gases - Carbon footprint of products - Requirements and guidelines for quantification (ISO/DIS 14067:2017)
Refuse collection vehicles - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles
Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles
Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles
Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles
Soil quality - Determination of effective cation exchange capacity and base saturation level using barium chloride solution (ISO/FDIS 11260:2017)
607 MM 360 FprEN ISO 14254 5020
608 MM 360 prEN 14702-3 4020
609 MM 360 prEN 16167 4020
610 MM 360 prEN 16181 4020
611 MM 360 prEN 16190 4020
612 MM 360 FprCEN/TS 16675 5020
613 MM 360 prEN 17183 Evaluation of sludge density 4020614 MM 360 prEN ISO 23161 4020
615 MM 360 prEN ISO 23470 4020
616 MM 360 prEN ISO 23753-2 4020
617 MM 360 prEN ISO 23753-1 4020
618 MMJS 54 prEN ISO 10551 4020
619 MMJS 137 prEN 1127-1 4020
620 MMJS 137 FprEN 17077 Determination of burning behaviour of dust layers 5020621 MMJS 137 FprEN 50291-1 5020
622 MMJS 137 prEN 60079-31:2018 4020
623 MMJS 148 EN 12042:2014/prA1:2017 4020
624 MMJS 223 prEN ISO 13851 4020
625 MMJS 223 prEN ISO 13857 4020
626 MMJS 223 FprEN 16985 5020
627 MMJS 223 EN ISO 19353:2016/prA1 4020
628 MMJS 223 prEN ISO 20607 4020
Soil quality - Determination of exchangeable acidity using barium chloride solution as extractant (ISO/FDIS 14254:2017)
Characterization and management of sludge - Determination of settling properties - Part 3: Determination of zone settling velocity (ZSV)
Soil, treated biowaste and sludge - Determination of polychlorinated biphenyls (PCB) by gas chromatography with mass selective detection (GC-MS) and gas chromatography with electron-capture detection (GC-ECD)
Soil, treated biowaste and sludge - Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography (GC) and high performance liquid chromatography (HPLC)
Soil, treated biowaste and sludge - Determination of dioxins and furans and dioxin-like polychlorinated biphenyls by gas chromatography with high resolution mass selective detection (HR GC-MS)
Waste - Test methods for the determination of the monolithic status of waste to be landfilled
Soil quality - Determination of selected organotin compounds - Gas-chromatographic method (ISO/DIS 23161:2017)
Soil quality - Determination of effective cation exchange capacity (CEC) and exchangeable cations using a hexamminecobalt trichloride solution (ISO/DIS 23470:2017)
Soil quality - Determination of dehydrogenase activity in soils - Part 2: Method using iodotetrazolium chloride (INT) (ISO/DIS 23753-2)
Soil quality - Determination of dehydrogenase activity in soils - Part 1: Method using triphenyltetrazolium chloride (TTC) (ISO/DIS 23753-1:2017)
Ergonomics of the physical environment - Subjective judgement scales for assessing physical environments (ISO/DIS 10551:2017)
Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
Gas detectors - Electrical apparatus for the detection of carbon monoxide in domestic premises - Part 1: Test methods and performance requirements
Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t"
Food processing machinery - Automatic dough dividers - Safety and hygiene requirements
Safety of machinery - Two-hand control devices - Functional aspects and design principles (ISO/DIS 13851:2017)
Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO/DIS 13857:2017)
Spray booths for organic coating material - Safety requirements
Safety of machinery - Fire prevention and fire protection - Amendment 1 (ISO 19353:2016/DAmd 1:2017)
Safety of machinery - Instruction handbook - General drafting principles (ISO/DIS 20607:2018)
629 MMJS 227 EN 144-1:2018 5020
630 MMJS 227 EN 144-2:2018 5020
631 MMJS 227 FprEN 358 5020
632 MMJS 227 EN ISO 374-1:2016/prA1 4020
633 MMJS 227 EN 388:2016/prA1:2018 Protective gloves against mechanical risks 4020634 MMJS 227 EN 1073-1:2016/FprA1:2018 5020
635 MMJS 227 FprEN 1149-5 5020
636 MMJS 227 prEN ISO 12402-3 4020
637 MMJS 227 prEN ISO 12402-8 4020
638 MMJS 227 prEN ISO 12402-9 4020
639 MMJS 227 prEN ISO 12402-2 4020
640 MMJS 227 prEN ISO 12402-6 4020
641 MMJS 227 prEN ISO 12402-5 4020
642 MMJS 227 prEN ISO 12402-4 4020
643 MMJS 227 prEN ISO 12402-7 4020
644 MMJS 227 prEN ISO 12402-10 4020
645 MMJS 227 prEN 12941 4020
646 MMJS 227 prEN 12942 4020
647 MMJS 227 FprEN 14593-1 5020
648 MMJS 227 FprEN 14594 5020
649 MMJS 227 prEN ISO 21420 4020
Respiratory protective devices - Gas cylinder valves - Part 1: Inlet connections
Respiratory protective devices - Gas cylinder valves - Part 2: Outlet connections
Personal protective equipment for work positioning and prevention of falls from a height - Belts and lanyards for work positioning or restraint
Protective gloves against dangerous chemicals and micro-organisms - Part 1: Terminology and performance requirements for chemical risks - Amendment 1 (ISO 374-1:2016/DAmd 1:2017)
Protective clothing against solid airborne particles including radioactive contamination - Part 1: Requirements and test methods for compressed air line ventilated protective clothing, protecting the body and the respiratory tract
Protective clothing - Electrostatic properties - Part 5: Material performance and design requirements
Personal flotation devices - Part 3: Lifejackets, performance level 150 Safety requirements (ISO/DIS 12402-3:2017)
Personal flotation devices - Part 8: Accessories - Safety requirements and test methods (ISO/DIS 12402-8:2017)
Personal flotation devices - Part 9: Test methods (ISO/DIS 12402-9:2017)
Personal flotation devices - Part 2: Lifejackets, performance level 275 - Safety requirements (ISO/DIS 12402-2:2017)
Personal flotation devices - Part 6: Special application lifejackets and buoyancy aids - Safety requirements and additional test methods (ISO/DIS 12402-6:2017)
Personal flotation devices - Part 5: Buoyancy aids (level 50) - Safety requirements (ISO/DIS 12402-5:2017)
Personal flotation devices - Part 4: Lifejackets, performance level 100 - Safety requirements (ISO/DIS 12402-4:2017)
Personal flotation devices - Part 7: Materials and components - Safety requirements and test methods (ISO/DIS 12402-7:2017)
Personal flotation devices - Part 10: Selection and application of personal flotation devices and other relevant devices (ISO/DIS 12402-10:2017)
Respiratory protective devices - Powered filtering devices incorporating a loose fitting respiratory interface - Requirements, testing, marking
Respiratory protective devices - Powered filtering devices incorporating full face masks, half masks or quarter masks - Requirements, testing, marking
Respiratory protective devices - Compressed air line breathing apparatus with demand valve - Part 1: Devices with a full face mask - Requirements, testing and marking
Respiratory protective devices - Continuous flow compressed air line breathing devices - Requirements, testing and marking
Protective gloves - General requirements and test methods (ISO/DIS 21420:2018)
650 MMJS 255 5020
651 MMJS 255 prEN 62841-3-7:2018 4020
652 MMJS 274 FprEN ISO 4869-2 5020
653 MMJS 274 FprEN ISO 4869-1 5020
654 MMJS 274 prEN 13819-1 Hearing protectors - Testing - Part 1: Physical test methods 4020
655 MMJS 274 prEN 13819-2 Hearing protectors - Testing - Part 2: Acoustic test methods 4020
656 MS 22 EN 60601-2-4:2011/FprA1:2017 5020
657 MS 22 FprEN 60601-2-16:2018 5020
658 MS 22 FprEN 60601-2-39:2018 5020
659 MS 22 FprEN 60601-2-76:2018 5020
660 MS 22 prEN 61223-3-5:2017 4020
661 MS 22 prEN 62985:2017 4020
662 MS 22 FprEN 80601-2-30:2017 5020
663 MS 22 FprEN 80601-2-49:2017 5020
664 MS 22 prEN 80601-2-77:2017 4020
665 MS 22 prEN 80601-2-78:2017 4020
666 MS 279 prEN 50413 4020
667 MS 279 prEN 50499:2017 4020
668 MS 377 FprEN ISO 5832-2 5020
669 MS 377 FprEN ISO 7488 5020
FprEN 62841-2-21:2017/FprAA:2017
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-21: Particular requirements for hand-held drain cleaners
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-7: Particular requirements for transportable wall saws
Acoustics - Hearing protectors - Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn (ISO/FDIS 4869-2:2018)
Acoustics - Hearing protectors - Part 1: Subjective method for the measurement of sound attenuation (ISO/FDIS 4869-1:2018)
Medical electrical equipment - Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators
Medical electrical equipment - Part 2-16: Particular requirements for basic safety and essential performance of haemodialysis, haemodiafiltration and haemofiltration equipment
Medical electrical equipment - Part 2-39: Particular requirements for basic safety and essential performance of peritoneal dialysis equipment
Medical Electrical Equipment - Part 2-76: Particular requirements for the basic safety and essential performance of low energy ionized gas haemostasis equipment
Evaluation and routine testing in medical imaging departments - Part 3-5: Acceptance tests - Imaging performance of computed tomography X-ray equipment
Methods for calculating Size Specific Dose Estimate (SSDE) on Computed Tomography
Medical electrical equipment - Part 2-30: Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers
Medical electrical equipment - Part 2-49: Particular requirements for the basic safety and essential performance of multifunction patient monitoring equipment
Medical Electrical Equipment - Part 2-77: Particular requirements for the basic safety and essential performance of robotically assisted surgical equipment
Medical Electrical Equipment - Part 2-78: Particular requirements for the basic safety and essential performance of medical robots for rehabilitation, assessment, compensation or alleviation
Basic standard on measurement and calculation procedures for human exposure to electric, magnetic and electromagnetic fields (0 Hz - 300 GHz)
Procedure for the assessment of the exposure of workers to electromagnetic fields
Implants for surgery - Metallic materials - Part 2: Unalloyed titanium (ISO/FDIS 5832-2:2017)
Dentistry - Mixing machines for dental amalgam (ISO/FDIS 7488:2018)
670 MS 377 prEN ISO 7886-4 4020
671 MS 377 EN ISO 9687:2015/FprA1 5020
672 MS 377 EN ISO 10079-1:2015/FprA1 5020
673 MS 377 FprEN ISO 10637 5020
674 MS 377 EN ISO 11070:2014/prA1 4020
675 MS 377 prEN ISO 13017 Dentistry - Magnetic attachments (ISO/DIS 13017:2018) 4020676 MS 377 EN 13060:2014/prA1:2017 Small steam sterilizers 4020677 MS 377 FprEN ISO 14607 5020
678 MS 377 prEN ISO 16054 4020
679 MS 377 FprCEN/TS 16826-3 5020
680 MS 377 prEN 17180 4020
681 MS 377 CEN/TR 17223:2018 5020
682 MS 377 FprEN ISO 18618 5020
683 MS 377 prEN ISO 20186-3 4020
684 MS 377 FprEN ISO 20608 5020
685 MS 377 FprEN ISO 28319 5020
686 MS 377 EN ISO 80601-2-13:2012/FprA2 5020
687 MT 4 prEN 50367:2017 4020
688 MT 4 CLC/FprTR 50542-1 5020
689 MT 4 prEN 50591 4020
690 MT 4 FprEN 61375-2-6:2018 5020
691 MT 72 FprEN 2369 5020
692 MT 72 FprEN 2564 5020
693 MT 72 FprEN 2944 5020
Sterile hypodermic syringes for single use - Part 4: Syringes with re-use prevention feature (ISO/DIS 7886-4:2017)
Dentistry - Graphical symbols for dental equipment - Amendment 1 (ISO 9687:2015/FDAM 1:2017)
Medical suction equipment - Part 1: Electrically powered suction equipment - Amendment 1: Changes to requirements for operating at extremes of temperature (ISO 10079-1:2015/FDAM 1:2018)
Dentistry - Central suction source equipment (ISO/FDIS 10637:2017)
Sterile single-use intravascular introducers, dilators and guidewires - Amendment 1 (ISO 11070:2014/DAM 1:2017)
Non-active surgical implants - Mammary implants - Particular requirements (ISO/FDIS 14607:2017)
Implants for surgery - Minimum data sets for surgical implants (ISO/DIS 16054:2017)
Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for snap frozen tissue - Part 3: Isolated DNA
Sterilizers for medical purposes - Low temperature vaporized hydrogen peroxide sterilizers - Requirements and testing
Guidance on the relationship between EN ISO 13485: 2016 (Medical devices - Quality management systems - Requirements for regulatory purposes) and European Medical Devices Regulation and In Vitro Diagnostic Medical Devices Regulation
Dentistry - Interoperability of CAD/CAM systems (ISO/FDIS 18618:2018)
Molecular in-vitro diagnostic examinations - Specifications for pre-examination processes for venous whole blood - Cellular RNA - Part 3: Isolated circulating cell free DNA from plasma (ISO/DIS 20186-3:2018)
Dentistry - Mixing machines for dental amalgam (ISO/FDIS 20608:2018)
Dentistry - Laser welding and filler materials (ISO/FDIS 28319:2017)
Medical electrical equipment - Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation - Amendment 2 (ISO 80601-2-13:2011/FDAM 2:2017)
Railway applications - Current collection systems - Technical criteria for the interaction between pantograph and overhead line (to achieve free access)
Railway applications - Driver's cab train display controller (TDC) - Part 1: General architecture
Specification and verification of energy consumption for railway rolling stock
Electronic railway equipment - Train communication network (TCN) - Part 2-6: On-board to ground communication
Aerospace series - Wires, heat resisting alloys - Diameter 0,2 mm ? D ? 8 mm - Dimensions
Aerospace series - Carbon fibre laminates - Determination of the fibre, resin and void contents
Aerospace series - Inserts, screw thread, helical coil, self-locking, in corrosion resisting steel FE-PA3004
694 MT 72 FprEN 4730 5020
695 MT 72 FprEN 6109 5020
696 MT 72 FprEN 12312-8 5020
697 MT 143 FprEN 61162-460:2018 5020
698 MT 146 FprEN 13231-5 5020
699 MT 146 prEN 14033-4 4020
700 MT 146 EN 14067-4:2013/prA1:2017 4020
701 MT 146 FprEN 14067-6 5020
702 MT 146 prEN 15152 Railway applications - Windscreens for trains 4020703 MT 146 FprEN 16727-1 5020
704 MT 146 FprEN 16727-2-1 5020
705 MT 146 FprEN 16989 5020
706 MT 146 FprEN 17065 5020
707 MT 199 prEN ISO 6185-1 4020
708 MT 199 prEN ISO 6185-2 4020
709 MT 199 prEN ISO 6185-3 4020
710 MT 199 prEN ISO 6185-4 4020
711 MT 199 prEN ISO 7840 Small craft - Fire-resistant fuel hoses (ISO 7840:2013) 4020712 MT 199 prEN ISO 8469 Small craft - Non-fire-resistant fuel hoses (ISO 8469:2013) 4020
713 MT 199 prEN ISO 8666 Small craft - Principal data (ISO 8666:2016) 4020714 MT 199 prEN ISO 8849 4020
715 MT 199 prEN ISO 9093-2 4020
716 MT 199 prEN ISO 9093-1 4020
Aerospace series - Anthropometric dimensioning of aircraft seats
Aerospace series - Static seal elements elastomer, moulded, phosphate ester resistant - Technical specification
Aircraft ground support equipment - Specific requirements - Part 8: Maintenance or service stairs and platforms
Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 460: Multiple talkers and multiple listeners - Ethernet interconnection - Safety and security
Railway applications - Track - Acceptance of works - Part 5: Procedures for rail reprofiling in plain line, switches, crossings and expansion devices
Railway applications - Track - Railbound construction and maintenance machines - Part 4: Technical requirements for running, travelling and working on urban rail
Railway applications - Aerodynamics - Part 4: Requirements and test procedures for aerodynamics on open track
Railway applications - Aerodynamics - Part 6: Requirements and test procedures for cross wind assessment
Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Non-acoustic performance - Part 1: Mechanical performance under static loadings - Calculation and test method
Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Non-acoustic performance - Part 2-1: Mechanical performance under dynamic loadings due to passing trains - Resistance to fatigue
Railway applications - Fire protection on railway vehicles - Fire behaviour test for a complete seat
Railway applications - Braking - Passenger coach test procedure
Inflatable boats - Part 1: Boats with a maximum motor power rating of 4,5 kW (ISO 6185-1:2001)
Inflatable boats - Part 2: Boats with a maximum motor power rating of 4,5 kW to 15 kW inclusive (ISO 6185-2:2001)
Inflatable boats - Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater (ISO 6185-3:2014)
Inflatable boats - Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater (ISO 6185-4:2011, Corrected version 2014-08-01)
Small craft - Electrically operated direct-current bilge pumps (ISO 8849:2003)
Small craft - Seacocks and through-hull fittings - Part 2: Non-metallic (ISO 9093-2:2002)
Small craft - Seacocks and through-hull fittings - Part 1: Metallic (ISO 9093-1:1994)
717 MT 199 prEN ISO 11192 Small craft - Graphical symbols (ISO 11192:2005) 4020718 MT 199 prEN ISO 11547 Small craft - Start-in-gear protection (ISO 11547:1994) 4020719 MT 199 prEN ISO 11812 4020
720 MT 199 prEN ISO 12215-6 4020
721 MT 199 prEN ISO 12215-3 4020
722 MT 199 prEN ISO 12215-2 4020
723 MT 199 prEN ISO 12215-8 4020
724 MT 199 prEN ISO 12215-9 4020
725 MT 199 prEN ISO 12215-7 4020
726 MT 199 prEN ISO 12215-4 4020
727 MT 199 prEN ISO 12215-5 4020
728 MT 199 prEN ISO 12215-1 4020
729 MT 199 prEN ISO 12216 4020
730 MT 199 prEN ISO 13297 4020
731 MT 199 prEN ISO 13590 4020
732 MT 199 prEN 14504 4020
733 MT 199 prEN ISO 14509-3 4020
734 MT 199 prEN ISO 14509-1 4020
735 MT 199 prEN ISO 15083 Small craft - Bilge-pumping systems (ISO 15083:2003) 4020736 MT 199 prEN ISO 15084 4020
737 MT 199 prEN 15869-1 4020
738 MT 199 prEN 15869-3 4020
739 MT 199 prEN 15869-2 4020
740 MT 199 FprEN ISO 16147 5020
741 MT 199 prEN ISO 16180 4020
Small craft - Watertight cockpits and quick-draining cockpits (ISO 11812:2001)
Small craft - Hull construction and scantlings - Part 6: Structural arrangements and details (ISO 12215-6:2008)
Small craft - Hull construction and scantlings - Part 3: Materials: Steel, aluminium alloys, wood, other materials (ISO 12215-3:2002)
Small craft - Hull construction and scantlings - Part 2: Materials: Core materials for sandwich construction, embedded materials (ISO 12215-2:2002)
Small craft - Hull construction and scantlings - Part 8: Rudders (ISO 12215-8:2009)
Small craft - Hull construction and scantlings - Part 9: Sailing craft appendages (ISO 12215-9:2012)
Small craft - Hull construction and scantlings - Part 7: Scantlings determination of multihulls (ISO/DIS 12215-7 :2017)
Small craft - Hull construction and scantlings - Part 4: Workshop and manufacturing (ISO 12215-4:2002)
Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2008)
Small craft - Hull construction and scantlings - Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate (ISO 12215-1:2000)
Small craft - Windows, portlights, hatches, deadlights and doors - Strength and watertightness requirements (ISO 12216:2002)
Small craft - Electrical systems - Alternating current installations (ISO 13297:2014)
Small craft - Personal watercraft - Construction and system installation requirements (ISO 13590:2003)
Inland navigation vessels - Floating landing stages and floating bridges on inland waters - Requirements, tests
Small craft - Airborne sound emitted by powered recreational craft - Part 3: Sound assessment using calculation and measurement procedures (ISO 14509-3:2009)
Small craft - Airborne sound emitted by powered recreational craft - Part 1: Pass-by measurement procedures (ISO 14509-1:2008)
Small craft - Anchoring, mooring and towing - Strong points (ISO 15084:2003)
Inland navigation vessels - Electrical shore connection, three phase current 400 V, 50 Hz, up to 125 A - Part 1: General requirements
Inland navigation vessels - Electrical shore connection, three phase current 400 V, 50 Hz, up to 125 A - Part 3: On-board unit, additional requirements
Inland navigation vessels - Electrical shore connection, three phase current 400 V, 50 Hz, up to 125 A - Part 2: On-shore unit, additional requirements
Small craft - Inboard diesel engines - Engine-mounted fuel, oil and electrical components (ISO/FDIS 16147:2018)
Small craft - Navigation lights - Installation, placement and visibility (ISO 16180:2013)
742 MT 199 prEN ISO 21487 4020
743 MT 199 prEN ISO 25197 4020
744 MT 303 FprEN 2591-228 5020
745 MT 303 FprEN 3646-006 5020
746 MT 303 FprEN 3660-001 5020
747 MT 303 FprEN 3745-411 5020
748 MT 303 FprEN 3745-506 5020
749 MT 303 FprEN 4533-001 5020
750 MT 303 FprEN 4611-005 5020
751 MT 303 FprEN 4611-006 5020
752 MT 303 FprEN 4611-007 5020
753 MT 303 FprEN 4641-001 5020
754 MT 303 FprEN 4839-001 5020
755 MT 303 FprEN 4839-003 5020
756 MT 303 prEN 62239-1:2018 4020
757 MT 345 FprCEN/TS 17182 5020
758 MT 345 FprCEN/TS 17184 5020
Small craft - Permanently installed petrol and diesel fuel tanks (ISO 21487:2012)
Small craft - Electrical/electronic control systems for steering, shift and throttle (ISO 25197:2012)
Aerospace series - Elements of electrical and optical connection - Test methods - Part 228: Ferrule withdrawal force
Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 006: Receptacle, hermetic, jam-nut mounting - Product standard
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 001: Technical specification
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 411: Resistance to fluids
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 506: Impact resistance
Aerospace series - Fibre optic systems - Handbook - Part 001: Termination methods and tools
Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 005: Silver plated copper - Operating temperatures between - 65 °C and 150 °C - Single extruded wall for enclosed applications - UV laser printable - Product standard
Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 006: Silver plated copper Operating temperatures, between - 65 °C and 150 °C - Dual extruded wall for open applications - UV laser printable - Product standard
Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 007: Nickel plated copper - Operating temperatures, between - 65 °C and 150 °C - Dual extruded wall for open applications - UV laser printable - Product standard
Aerospace series - Cables, optical, 125 µm diameter cladding - Part 001: Technical specification
Aerospace series - Arc fault circuit breakers, three-poles, temperature compensated, rated current 3 A to 25 A - 115 V a.c. 400 Hz constant frequency - Part 001: Technical specification
Aerospace series - Arc Fault Circuit breakers, three-pole, temperature compensated, rated currents 3 A to 25 A, 115/200 V a.c. 400 Hz constant frequency - Part 003: Without auxiliary contacts - Product standard
Process management for avionics - Management plan - Part 1: Preparation and maintenance of an electronic components management plan
Intelligent transport systems - eSafety - eCall via an ITS-station
Intelligent transport systems - eSafety - eCall High level application Protocols (HLAP) using IMS packet switched networks
TC
CEN/TC 302
CEN/TC 302
CEN/TC 275
CEN/TC 275
CEN/TC 275
CEN/TC 275
CEN/TC 275
CEN/TC 327
CEN/TC 327
CEN/TC 275
CEN/TC 327
CEN/TC 302
CEN/TC 307
CEN/TC 338
CEN/TC 338
CEN/TC 307
CEN/TC 307
CEN/TC 345
CEN/TC 345
CEN/TC 345CEN/TC 72
CEN/TC 191
CEN/TC 192
CEN/TC 70
CEN/TC 391
CEN/TC 391CEN/TC 230
CEN/TC 230
CEN/TC 230
CEN/TC 230
CEN/TC 164
CEN/TC 230
CEN/TC 230
CEN/TC 164
CEN/TC 230
CEN/TC 230
CEN/TC 230
CEN/TC 230
CEN/TC 346
CEN/TC 346
CLC/TC 86BXA
CLC/TC 86A
CLC/TC 86A
CLC/TC 86A
CLC/TC 86A
CLC/TC 86BXA
CLC/SR 86C
CLC/SR 86C
CLC/SR 86C
CLC/SR 86C
CEN/TC 224
CEN/TC 224
CEN/TC 224
CEN/TC 224
CLC/TC 215
CLC/TC 215
CLC/TC 215
CLC/TC 215
CLC/TC 215
CLC/TC 215
CEN/TC 251
CEN/TC 251
CEN/TC 251
CEN/TC 251
CLC/TC 100XCLC/TC 108X
CLC/TC 100X
CLC/TC 100X
CLC/TC 100X
CEN/TC 331
CEN/TC 241
CEN/TC 254
CEN/TC 88
CEN/TC 88
CEN/TC 88
CEN/TC 254
CEN/TC 254
CEN/TC 351
CEN/TC 254
CEN/TC 88
CEN/TC 88
CEN/TC 254
CEN/TC 351
CEN/TC 351
CEN/TC 351
CEN/TC 351
CEN/TC 351
CEN/TC 351
CEN/TC 67
CEN/TC 163
CEN/TC 246
CEN/TC 129
CEN/TC 129
CEN/TC 129
CEN/TC 129
CEN/TC 129
CEN/TC 129
CEN/TC 129
CEN/TC 129CEN/TC 129
CEN/TC 129
CEN/TC 129
CEN/TC 129
CLC/TC 64
CLC/TC 64
CLC/TC 64
CLC/TC 64
CEN/TC 226
CEN/TC 226
CEN/TC 227CEN/TC 227
CEN/TC 227
CEN/TC 227
CEN/TC 227
CEN/TC 227
CEN/TC 227
CEN/TC 227
CEN/TC 227
CEN/TC 227
CEN/TC 226
CEN/TC 336
CEN/TC 336
CEN/TC 227
CEN/TC 336
CEN/TC 227
CEN/TC 227
CEN/TC 169
CEN/TC 126
CEN/TC 126CEN/TC 126CEN/TC 89
CEN/TC 107
CEN/TC 107
CEN/TC 107
CEN/TC 107
CEN/TC 107
CEN/TC 156
CEN/TC 195
CEN/TC 195
CEN/TC 195
CEN/TC 195
CEN/TC 33
CEN/TC 33CEN/TC 33
CEN/TC 33
CEN/TC 33
CEN/TC 33
CEN/TC 33
CEN/TC 33
CEN/TC 33
CEN/TC 154
CEN/TC 154
CEN/TC 104
CEN/TC 104
CEN/TC 124
CEN/TC 442
CEN/TC 442
CEN/TC 167CEN/TC 167CEN/TC 167CEN/TC 167CEN/TC 167CEN/TC 167
CEN/TC 167
CEN/TC 167CEN/TC 250
CEN/TC 340CEN/TC 250
CLC/TC 81X
CEN/TC 125
CEN/TC 125
CEN/TC 125CEN/TC 341
CEN/TC 341
CEN/TC 189
CEN/TC 189
CEN/TC 348
CEN/TC 348CEN/TC 348
CEN/TC 166
CLC/TC 2
CLC/TC 14
CLC/SR 112
CLC/SR 112
CLC/SR 112
CLC/TC 17AC
CLC/TC 17AC
CLC/TC 17AC
CLC/TC 121A
CLC/TC 121A
CLC/TC 213
CLC/SR 23G
CLC/SR 23G
CLC/SR 23G
CLC/SR 23G
CLC/SR 23G
CLC/SR 23G
CLC/TC 23E
CLC/TC 23H
CLC/TC 23H
CLC/SR 23K
CLC/TC 23E
CLC/SR 32B
CLC/TC 36ACLC/SR 47
CLC/SR 47A
CLC/SR 47
CLC/SR 47
CLC/SR 47A
CLC/SR 47A
CLC/SR 47
CLC/SR 49
CLC/SR 49
CLC/TC 111X
CLC/SR 51
CLC/SR 51
CLC/SR 51
CLC/SR 51
CLC/SR 51
CLC/TC 55
CLC/TC 55
CLC/TC 44X
CLC/TC 65X
CLC/TC 65X
CLC/TC 44X
CLC/TC 65X
CLC/TC 65X
CLC/TC 65X
CLC/TC 65X
CLC/TC 65X
CLC/SR 66
CLC/SR 66
CLC/SR 66
CLC/SR 66
CLC/SR 29
CLC/TC 79
CLC/TC 79
CLC/TC 79
CLC/TC 79
CLC/TC 79
CLC/TC 210
CLC/TC 210
CLC/TC 210
CLC/TC 82
CLC/TC 82
CLC/TC 82
CLC/TC 82
CLC/TC 22X
CLC/TC 22X
CLC/TC 22X
CEN/TC 240
CEN/TC 240
CEN/TC 240
CEN/TC 240
CEN/TC 240
CEN/TC 121
CEN/TC 121
CEN/TC 138
ECISS/TC 102
ECISS/TC 100
ECISS/TC 102
ECISS/TC 101
ECISS/TC 101
ECISS/TC 109
ECISS/TC 103
ECISS/TC 105ECISS/TC 111ECISS/TC 104
CEN/SS M11
CEN/SS M11
CEN/TC 190CEN/SS F20
CEN/TC 290
CEN/TC 290
CEN/TC 145
CEN/TC 185
CEN/TC 185
CEN/TC 145
CEN/TC 136
CEN/TC 136
CEN/TC 433
CEN/TC 433
CEN/TC 136
CEN/TC 144CEN/TC 301
CEN/TC 301
CEN/TC 301
CEN/TC 301
CEN/TC 10
CEN/TC 10
CEN/TC 10
CEN/TC 150
CEN/TC 150
CEN/TC 150
CEN/TC 10
CEN/TC 147
CEN/TC 147CEN/TC 150
CEN/TC 150
CEN/TC 150
CEN/TC 150
CEN/TC 93CEN/TC 93
CEN/TC 69
CEN/TC 69
CEN/TC 289
CEN/TC 289
CEN/TC 309
CEN/TC 289
CEN/TC 248
CEN/TC 248
CEN/TC 248CEN/TC 248
CEN/TC 248
CEN/TC 248
CEN/TC 248
CEN/TC 248
CEN/TC 248
CEN/TC 248
CEN/TC 260
CEN/TC 260
CEN/TC 260
CEN/TC 260
CEN/TC 249
CEN/TC 249
CEN/TC 249
CEN/TC 155
CEN/TC 218
CEN/TC 155
CEN/TC 155
CEN/TC 155
CEN/TC 155
CEN/TC 249
CEN/TC 249
CEN/TC 155
CEN/TC 155
CEN/TC 155
CEN/TC 155
CEN/TC 155
CEN/TC 366
CEN/TC 366
CEN/TC 366
CEN/TC 249CEN/TC 155
CEN/TC 249
CEN/TC 155
CEN/TC 155
CEN/TC 155
CEN/TC 155
CEN/TC 155
CEN/TC 155
CEN/TC 366
CEN/TC 366
CEN/TC 249
CEN/TC 155
CEN/TC 155
CEN/TC 249
CEN/TC 249
CEN/TC 176
CEN/TC 176
CEN/TC 176CEN/TC 176CEN/TC 176CEN/TC 237
CEN/TC 294
CEN/TC 294
CEN/TC 294
CEN/TC 294
CEN/TC 318CEN/TC 175CEN/TC 207
CEN/TC 175CEN/TC 142
CEN/TC 38
CEN/TC 207
CEN/TC 207CEN/TC 142
CEN/TC 332CEN/TC 184
CEN/TC 52CEN/TC 252
CEN/TC 252
CEN/TC 252
CEN/TC 252
CEN/TC 252
CEN/TC 252
CEN/TC 52
CEN/TC 52
CEN/TC 252CEN/TC 252
CLC/TC 95X
CLC/SR 94
CLC/TC 26ACLC/TC 26A
CLC/TC 26ACLC/TC 26ACLC/TC 26ACLC/TC 26A
CLC/TC 34
CLC/TC 34
CLC/TC 34
CLC/TC 34CLC/TC 34
CLC/TC 34CLC/TC 34
CLC/TC 34
CLC/TC 34
CLC/TC 34
CLC/TC 34
CLC/TC 34
CLC/TC 34
CLC/TC 34
CLC/TC 34
CLC/TC 34
CLC/TC 34
CLC/TC 34
CLC/SR 40
CLC/TC 40XA
CLC/TC 40XA
CLC/TC 40XA
CLC/TC 57
CLC/TC 57
CLC/TC 57
CLC/TC 57
CLC/TC 57
CLC/TC 57
CLC/TC 57
CLC/SR 56CLC/SR 48D
CLC/SR 48B
CLC/SR 48B
CLC/SR 48B
CLC/SR 48B
CLC/SR 48B
CLC/SR 48B
CLC/SR 48B
CEN/TC 113
CEN/TC 268CEN/TC 54CEN/TC 54CEN/TC 54
CEN/TC 214
CEN/TC 262
CEN/TC 262
CEN/TC 262
CEN/TC 262
CLC/TC 46X
CLC/SR 105
CLC/SR 105
CLC/TC 21X
CLC/TC 21X
CLC/TC 21X
CLC/TC 21X
CLC/TC 21X
CLC/TC 21X
CLC/TC 21X
CLC/TC 21X
CLC/TC 21X
CLC/SR 120
CLC/SR 28
CLC/TC 85X
CLC/TC 8X
CLC/TC 8X
CEN/TC 12
CEN/TC 12
CEN/TC 12
CEN/TC 12
CEN/TC 12
CEN/TC 265
CEN/TC 267CEN/TC 265
CEN/TC 12
CEN/TC 12
CEN/TC 12
CEN/TC 12
CEN/TC 132
CEN/TC 132
CEN/TC 132
CEN/TC 132
CEN/TC 132
CEN/TC 132
CEN/TC 132
CEN/TC 132
CLC/SR 101
CLC/SR 91
CLC/SR 91
CLC/SR 91
CEN/TC 197
CEN/TC 197
CEN/TC 197
CEN/TC 203
ECISS/TC 110
ECISS/TC 110
ECISS/TC 110
CEN/TC 203
CEN/TC 151
CEN/TC 151
CEN/TC 151
CEN/TC 151
CEN/TC 151
CEN/TC 337
CEN/TC 337
CEN/TC 172
CEN/TC 172
CEN/TC 172
CEN/TC 180
CEN/TC 180
CEN/TC 269
CEN/TC 109
CEN/TC 109
CEN/TC 109
CEN/TC 180
CEN/TC 170
CEN/TC 170
CEN/TC 170
CEN/TC 286
CEN/TC 286
CEN/TC 286
CEN/TC 286
CEN/TC 286
CEN/TC 286
CEN/TC 286
CEN/TC 286
CEN/TC 23
CEN/TC 286
CEN/TC 286
CEN/TC 286
CLC/TC 59X
CLC/TC 59X
CLC/TC 59X
CLC/TC 59X
CLC/TC 59X
CLC/TC 59X
CLC/TC 59X
CLC/TC 59X
CLC/TC 59X
CLC/TC 59X
CLC/TC 61
CLC/TC 61
CLC/TC 61
CLC/TC 61
CLC/TC 61
CLC/SR 10
CEN/TC 261
CEN/TC 296
CEN/TC 296
CEN/TC 296
CEN/TC 296
CEN/TC 296
CEN/TC 261
CEN/TC 216
CEN/TC 216
CEN/TC 216
CEN/TC 49
CEN/TC 58
CLC/TC 37A
CEN/TC 19
CEN/TC 19
CEN/TC 19
CEN/TC 19
CEN/TC 19
CEN/TC 19
CEN/TC 19
CEN/TC 134
CEN/TC 134
CLC/BTTF 116-2
CEN/TC 263
CEN/TC 263
CEN/TC 263
CEN/TC 139
CEN/TC 139
CEN/TC 139
CEN/TC 139
CEN/TC 139
CEN/TC 139
CEN/TC 139
CEN/TC 298
CEN/TC 298
CEN/TC 298
CEN/TC 298
CEN/TC 408
CEN/TC 381
CEN/TC 440
CEN/TC 440
CEN/TC 440
CEN/TC 438
CEN/TC 438
CLC/SR 25CEN/TC 287
CEN/TC 287
CEN/TC 287
CEN/TC 137
CEN/TC 264
CEN/TC 137
CEN/TC 137
CEN/TC 137
CEN/TC 137
CEN/TC 137
CEN/SS S26
CEN/SS S26
CEN/SS S26
CEN/TC 183
CEN/TC 183
CEN/TC 183
CEN/TC 183
CEN/TC 444
CEN/TC 444
CEN/TC 308
CEN/TC 444
CEN/TC 444
CEN/TC 444
CEN/TC 444
CEN/TC 308CEN/TC 444
CEN/TC 444
CEN/TC 444
CEN/TC 444
CEN/TC 122
CEN/TC 305
CEN/TC 305CLC/TC 216
CLC/TC 31
CEN/TC 153
CEN/TC 114
CEN/TC 114
CEN/TC 271
CEN/TC 114
CEN/TC 114
CEN/TC 79
CEN/TC 79
CEN/TC 160
CEN/TC 162
CEN/TC 162CEN/TC 162
CEN/TC 162
CEN/TC 162
CEN/TC 162
CEN/TC 162
CEN/TC 162
CEN/TC 162
CEN/TC 162
CEN/TC 162
CEN/TC 162
CEN/TC 162
CEN/TC 79
CEN/TC 79
CEN/TC 79
CEN/TC 79
CEN/TC 162
CLC/TC 116
CLC/TC 116
CEN/TC 211
CEN/TC 211
CEN/TC 159
CEN/TC 159
CLC/TC 62
CLC/TC 62
CLC/TC 62
CLC/TC 62
CLC/TC 62
CLC/TC 62
CLC/TC 62
CLC/TC 62
CLC/TC 62
CLC/TC 62
CLC/TC 106X
CLC/TC 106X
CEN/TC 55
CEN/TC 55
CEN/TC 205
CEN/TC 55
CEN/TC 215
CEN/TC 55
CEN/TC 205
CEN/TC 55CEN/TC 102CEN/TC 285
CEN/TC 285
CEN/TC 140
CEN/TC 102
CEN/CLC/JTC 3
CEN/TC 55
CEN/TC 140
CEN/TC 55
CEN/TC 55
CEN/TC 215
CLC/TC 9X
CLC/TC 9X
CLC/TC 9X
CLC/TC 9X
ASD-STAN/D 4/WG 1
ASD-STAN/D 4/WG 8
ASD-STAN/D 3/WG 2
ASD-STAN/D 1/WG 7
ASD-STAN/D 3
CEN/TC 274
CLC/SR 80
CEN/TC 256
CEN/TC 256
CEN/TC 256
CEN/TC 256
CEN/TC 256CEN/TC 256
CEN/TC 256
CEN/TC 256
CEN/TC 256
CEN/SS T01
CEN/SS T01
CEN/SS T01
CEN/SS T01
CEN/SS T01CEN/SS T01
CEN/SS T01CEN/SS T01
CEN/SS T01
CEN/SS T01
CEN/SS T01CEN/SS T01CEN/SS T01
CEN/SS T01
CEN/SS T01
CEN/SS T01
CEN/SS T01
CEN/SS T01
CEN/SS T01
CEN/SS T01
CEN/SS T01
CEN/SS T01
CEN/SS T01
CEN/SS T01
CEN/SS T01
CEN/TC 15
CEN/SS T01
CEN/SS T01
CEN/SS T01CEN/SS T01
CEN/TC 15
CEN/TC 15
CEN/TC 15
CEN/SS T01
CEN/SS T01
CEN/SS T01
CEN/SS T01
ASD-STAN/D 2
ASD-STAN/D 2/WG 3
ASD-STAN/D 2
ASD-STAN/D 2
ASD-STAN/D 2
ASD-STAN/D 2
ASD-STAN/D 2
ASD-STAN/D 2
ASD-STAN/D 2/WG 5
ASD-STAN/D 2/WG 5
CLC/SR 107
CEN/TC 278
CEN/TC 278
ASD-STAN/D 2/WG 10
ASD-STAN/D 2/WG 10
Proiectele de standarde internaţionale ISO-IEC cu faze de vot în 2018Nota: Lista contine proiectele elaborate în comitetele tehnice de standardizare internationale în care Romania este membru participant
Minister CT Indicativ EN
1 MADR 97 ISO/DIS 21160
2 MADR 97 ISO/DIS 21330
3 MADR 97 ISO/DIS 21766
4 MADR 180 ISO/DIS 9167
5 MAI 376 ISO/DIS 22381
6 MAI 376 ISO/DIS 22382
7 MCSI 204 ISO/IEC 7816-4:2013/DAmd 18 MCSI 204 ISO/IEC 7816-4:2013/DAmd 29 MCSI 204 ISO/IEC 10373-6:2016/Amd 3
10 MCSI 204 ISO/IEC FDIS 14443-1
11 MCSI 204 ISO/IEC DIS 15693-1
12 MCSI 204 ISO/IEC DIS 15693-2
13 MCSI 204 ISO/IEC DIS 18328-4
14 MCSI 204 ISO/IEC DIS 24787
15 MCSI 208 ISO/IEC DIS 11770-2
16 MCSI 208 ISO/IEC DIS 15026-1
17 MCSI 208 ISO/IEC DIS 18033-6
18 MCSI 208 ISO/IEC DIS 19086-4
19 MCSI 208 ISO/IEC 19896-1:2018
20 MCSI 208 ISO/IEC DIS 19896-3
21 MCSI 208 ISO/IEC DIS 20889
22 MCSI 208 ISO/IEC DIS 21878
23 MCSI 208 ISO/IEC 24760-1:2011/DAmd 1.2
24 MCSI 208 ISO/IEC DIS 24773-1
Nr Crt
25 MCSI 208 ISO/IEC DIS 26553
26 MCSI 208 ISO/IEC DIS 26554
27 MCSI 208 ISO/IEC DIS 26556
28 MCSI 208 ISO/IEC 27000:2018
29 MCSI 208 ISO/IEC DIS 27050-2
30 MCSI 208 ISO/IEC 29110-4-1
31 MCSI 208 ISO/IEC DIS 29110-4-3
32 MCSI 208 ISO/IEC/IEEE DIS 29148
33 MCSI 208 ISO/IEC/IEEE DIS 4203034 MCSI 208 ISO/IEC DIS 90003
35 MCSI 300 ISO/IEC DIS 15963-1
36 MCSI 300 ISO/IEC DIS 15963-2
37 MCSI 300 ISO/IEC DIS 19823-19
38 MCSI 300 ISO/IEC DIS 29167-21
39 MCSI 300 ISO/IEC DIS 29167-22
40 MCSI 375 IEC 60268-4 ED641 MCSI 375 IEC TS 62312-1-1 ED2
42 MCSI 375 IEC TS 62312-2 ED2
43 MCSI 375 IEC 62680-1-4 ED1
44 MCSI 375 IEC 62680-1-3 ED3
45 MCSI 375 IEC 63006 ED146 MCSI 375 IEC 63033-2 ED1
47 MDRAPFE 335 ISO/DIS 19650-1.2
48 MDRAPFE 335 ISO/DIS 19650-2.2
49 MDRAPFE 397 ISO/FDIS 37157
50 MDRAPFE 397 ISO/DIS 37158
51 ME 2 ISO 81346-12 ED1
52 ME 2 IEC/IEEE 82079-1 ED2
53 ME 11 IEC 60320-3/AMD1 ED1
54 ME 11 IEC 60320-1/AMD1 ED3
55 ME 11 IEC 60320-2-1 ED3
56 ME 11 IEC 60320-2-3 ED2
57 ME 11 IEC 60320-2-4 ED2
58 ME 11 IEC 60799 ED3
59 ME 11 IEC 60898-3 ED1
60 ME 11 IEC 62955 ED1
61 ME 11 IEC 63052 ED1
62 ME 16 IEC 60709 ED3
63 ME 16 IEC 60744 ED2
64 ME 16 IEC 60772 ED2
65 ME 16 IEC 61225 ED3
66 ME 16 IEC 61500 ED3
67 ME 16 IEC 62244 ED2
68 ME 16 IEC/IEEE 62582-6 ED1
69 ME 16 IEC 62765-2 ED1
70 ME 16 IEC 62988 ED1
71 ME 16 IEC 63047 ED1
72 ME 23 ISO/DIS 18646-2
73 ME 23 IEC 60746-4 ED2
74 ME 23 IEC 61131-10 ED175 ME 23 IEC 62714-1 ED2
76 ME 23 IEC 62769-100 ED1
77 ME 23 IEC 62769-115-2 ED1
78 ME 23 IEC 62828-3 ED1
79 ME 23 IEC TR 63176 ED1
80 ME 23 IEC/DIS 80601-2-77
81 ME 23 IEC/DIS 80601-2-78
82 ME 24 IEC 61010-2-051 ED4
83 ME 24 IEC 61010-2-061 ED4
84 ME 24 IEC 61010-2-101 ED3
85 ME 24 IEC 61010-2-081 ED3
86 ME 30 Amd 2 Frag 3 to CISPR 11 Ed. 6
87 ME 30 CISPR 12 ED7
88 ME 30 CISPR 15 ED9
89 ME 30 CISPR 16-1-1/ISH1 ED4
90 ME 30 CISPR 36 ED1
91 ME 30 IEC 61000-2-2 Ed2 A2
92 ME 35 IEC 60904-3 ED4
93 ME 35 IEC 60904-7 ED4
94 ME 35 IEC TS 60904-1-2 ED1
95 ME 35 IEC 62788-1-7 ED1
96 ME 35 IEC 62892 ED197 ME 35 IEC TS 62994 ED1
98 ME 39 ISO 21904-3:2018
99 ME 56 ISO 9004
100 ME 56 ISO/FDIS 21001
101 ME 56 ISO/DIS 30401102 ME 56 ISO/DIS 30414
103 ME 56 ISO 45001
104 ME 59 ISO 12297-2
105 ME 78 ISO 15118-8:2018
106 ME 78 ISO 15118-4
107 ME 78 ISO 15118-5
108 ME 78 ISO/DIS 15118-1
109 ME 78 ISO/FDIS 16845-2
110 ME 78 ISO/DIS 17840-3
111 ME 78 ISO/DIS 17840-2
112 ME 78 ISO/DIS 20078-1
113 ME 78 ISO/DIS 20078-3
114 ME 78 ISO/DIS 20078-2
115 ME 78 ISO/DIS 20078-4
116 ME 78 ISO/DIS 20080
117 ME 109 ISO/DIS 5167-6
118 ME 118 ISO 19474:2018119 ME 131 IEC 61167 ED4120 ME 131 IEC 61347-2-14 ED1
121 ME 131 IEC 62031 Ed. 2122 ME 131 IEC 62386-101/AMD1 ED2
123 ME 131 IEC 62386-102/AMD1 ED2
124 ME 131 IEC 62386-103/AMD1 ED1
125 ME 131 IEC 62386-220 ED1
126 ME 131 IEC 62386-217 ED1
127 ME 131 IEC 62386-218 ED1
128 ME 131 IEC 62386-207 ED2
129 ME 131 IEC 62386-222 ED1
130 ME 131 IEC 62386-216 ED1
131 ME 131 IEC 62504/AMD1 ED1
132 ME 131 IEC 62717/AMD2 ED1
133 ME 144 IEC 31010 ED2134 ME 144 IEC 31010 ED2135 ME 159 IEC 60331-1 ED2
136 ME 159 IEC 60331-3 ED2
137 ME 159 IEC 60331-2 ED2
138 ME 159 IEC 60754-3 ED1
139 ME 159 IEC 61238-1-1 ED1
140 ME 159 IEC 61238-1-2 ED1
141 ME 159 IEC 61238-1-3 ED1
142 ME 164 IEC 62055-41 ED3
143 ME 166 IEC 60051-9 ED5
144 ME 166 IEC 61557-1 ED3
145 ME 166 IEC 61557-2 ED3
146 ME 166 IEC 61557-3 ED3
147 ME 166 IEC 61557-4 ED3
148 ME 166 IEC 61557-5 ED3
149 ME 166 IEC 61557-6 ED3
150 ME 166 IEC 61557-7 ED3
151 ME 169 ISO/DIS 19345-2
152 ME 169 ISO/DIS 19345-1
153 ME 169 ISO/DIS 21809-11
154 ME 230 ISO/DIS 9211-8
155 ME 238 IEC 60675/AMD2 ED2
156 ME 238 IEC 60705/AMD2 ED4
157 ME 238 IEC 60879 ED2
158 ME 333 ISO/DIS 8820-6159 ME 333 ISO/DIS 11452-2
160 ME 333 ISO 19453-1
161 ME 333 ISO 19453-3
162 ME 333 ISO 19453-4
163 ME 333 ISO 19453-5
164 ME 333 ISO/DIS 19642-5
165 ME 333 ISO/DIS 19642-8
166 ME 333 ISO/DIS 19642-1
167 ME 333 ISO/DIS 19642-2168 ME 333 ISO/DIS 19642-3
169 ME 333 ISO/DIS 19642-6
170 ME 333 ISO/DIS 19642-7
171 ME 333 ISO/DIS 19642-10
172 ME 333 ISO/DIS 19642-4
173 ME 333 ISO/DIS 19642-9
174 ME 373 ISO/DIS 20228.2175 ME 382 ISO/DIS 21632
176 MEN 173 IEC 60050-485 ED1
177 MM 53 ISO/DIS 28902-3
178 MMJS 137 IEC 60079-31 ED3
179 MS 22 Amd 1 to IEC 60601-2-4
180 MS 22 IEC TR 60601-4-3 ED2
181 MS 22 IEC 60601-2-76 ED1
182 MS 22 IEC 60601-2-16 ED5
183 MS 22 IEC 60601-2-39 ED3
184 MS 22 IEC 60601-2-43/AMD2 ED2
185 MS 22 IEC 61223-3-5 ED2
186 MS 22 IEC TR 61948-2 ED2
187 MS 22 IEC TR 61948-4 ED2
188 MS 22 IEC 62304 Ed. 2189 MS 22 IEC 62985 ED1
190 MS 22 IEC 80601-2-78 ED1
191 MS 22 IEC 80601-2-77 ED1
192 MS 22 IEC 80601-2-78 ED1
193 MS 22 IEC 80601-2-77 ED1
194 MS 22 IEC 80601-2-49 ED1
195 MS 22 IEC 80601-2-30 ED2
196 MS 22 ISO 80601-2-13/AMD2 ED1
197 MS 377 ISO 7488198 MS 377 ISO/DIS 7886-4
199 MS 377 ISO 9687:2015/Amd 1200 MS 377 ISO 10637201 MS 377 ISO 11070:2014/DAmd 1202 MS 377 ISO 14607
203 MS 377 ISO/DIS 16054204 MS 377 ISO 17327-1:2018
205 MS 377 ISO 19227
206 MS 377 ISO/DIS 19894207 MS 377 ISO/DIS 21802
208 MT 4 IEC 61375-2-6 ED1
209 MT 4 IEC 61991 ED2
210 MT 4 IEC 62236-1 ED3211 MT 4 IEC 62236-2 ED3
212 MT 4 IEC 62236-3-1 ED3
213 MT 4 IEC 62236-3-2 ED3
214 MT 4 IEC 62236-4 ED3
215 MT 4 IEC 62236-5 ED3
216 MT 4 IEC 62848-2 ED1
217 MT 4 IEC 62973-1 ED1
218 MT 4 IEC 62995 ED1219 MT 143 IEC 60092-302-2 ED1
220 MT 143 IEC 61892-1 ED4
221 MT 143 IEC 61892-2 ED3
222 MT 143 IEC 61892-3 ED4
223 MT 143 IEC 61892-4 ED2
224 MT 143 IEC 61892-5 ED4
225 MT 143 IEC 61892-6 ED4
226 MT 143 IEC 61892-7 ED4
227 MT 199 ISO/DIS 11711-1
228 MT 199 ISO/DIS 20661
229 MT 199 ISO/DIS 20662
230 MT 199 ISO/DIS 20663
SECTIUNEA 3, CAPITOLUL 2
Proiectele de standarde internaţionale ISO-IEC cu faze de vot în 2018Nota: Lista contine proiectele elaborate în comitetele tehnice de standardizare internationale în care Romania este membru participant
Titlu Faza TC
4020 ISO/TC 126
4020 ISO/TC 126
4020 ISO/TC 126
4020 ISO/TC 34/SC 2
4020 ISO/TC 292
4020 ISO/TC 292
Record handling 4020 ISO/IEC JTC 1/SC 17Waiting time management 4020 ISO/IEC JTC 1/SC 17PICC loading effect 5020 ISO/IEC JTC 1/SC 17
5020 ISO/IEC JTC 1/SC 17
4020 ISO/IEC JTC 1/SC 17
4020 ISO/IEC JTC 1/SC 17
4020 ISO/IEC JTC 1/SC 17
Information technology -- Identification cards -- On-card biometric comparison 4020 ISO/IEC JTC 1/SC 17
4020 ISO/IEC JTC 1/SC 27
4020 ISO/IEC JTC 1/SC 7
4020 ISO/IEC JTC 1/SC 27
4020 ISO/IEC JTC 1/SC 27
5020 ISO/IEC JTC 1/SC 27
4020 ISO/IEC JTC 1/SC 27
4020 ISO/IEC JTC 1/SC 27
4020 ISO/IEC JTC 1/SC 27
Additional terminology and concepts 4020 ISO/IEC JTC 1/SC 27
4020 ISO/IEC JTC 1/SC 7
Cigarettes -- Determination of selected carbonyls in the mainstream smoke of cigarettes -- Method using high performance liquid chromatography
Cigarettes -- Determination of selected volatile organic compounds in the mainstream smoke of cigarettes -- Method using GC/MS
Tobacco and tobacco products -- Determination of tobacco-specific nitrosamines in tobacco products -- Method using LC-MS/MS
Rapeseed -- Determination of glucosinolates content -- Method using high-performance liquid chromatography
Security and resilience -- Guidelines for establishing interoperability among object identification systems to deter counterfeiting and illicit trade
Security and resilience -- Authenticity, integrity and trust for products and documents -- Guidelines for the content, security, issuance and examination of excise tax stamps
Cards and security devices for personal identification -- Contactless proximity objects -- Part 1: Physical characteristics
Cards and security devices for personal identification -- Contactless vicinity objects -- Part 1: Physical characteristics
Cards and security devices for personal identification -- Contactless vicinity objects -- Part 2: Air interface and initialization
Identification cards -- ICC-managed devices -- Part 4: Test methods for logical characteristics
Information technology -- Security techniques -- Key management -- Part 2: Mechanisms using symmetric techniques
Systems and software engineering -- Systems and software assurance -- Part 1: Concepts and vocabulary
Information technology security techniques -- Encryption algorithms -- Part 6: Homomorphic encryption
Information technology -- Cloud computing -- Service level agreement (SLA) framework -- Part 4: Security and privacy
IT security techniques -- Competence requirements for information security testers and evaluators -- Part 1: Introduction, concepts and general requirements
Information technology -- Security techniques -- Competence requirements for information security testers and evaluators -- Part 3: Knowledge, skills and effectiveness requirements for ISO/IEC 15408 evaluators
Information technology -- Security techniques -- Privacy enhancing data de-identification techniques
Information technology -- Security techniques -- Security guidelines for design and implementation of virtualized servers
Software and systems engineering -- Certification of software and systems engineering professionals -- Part 1: General requirements
4020 ISO/IEC JTC 1/SC 7
4020 ISO/IEC JTC 1/SC 7
4020 ISO/IEC JTC 1/SC 7
5020 ISO/IEC JTC 1/SC 27
4020 ISO/IEC JTC 1/SC 27
5020 ISO/IEC JTC 1/SC 7
4020 ISO/IEC JTC 1/SC 7
4020 ISO/IEC JTC 1/SC 7
Systems and Software Engineering -- Architecture Evaluation 4020 ISO/IEC JTC 1/SC 74020 ISO/IEC JTC 1/SC 7
4020 ISO/IEC JTC 1/SC 31
4020 ISO/IEC JTC 1/SC 31
4020 ISO/IEC JTC 1/SC 31
4020 ISO/IEC JTC 1/SC 31
4020 ISO/IEC JTC 1/SC 31
Sound system equipment - Part 4: Microphones 4020 IEC/TC 1004020 IEC/TC 100
4020 IEC/TC 100
4020 IEC/TC 100
4020 IEC/TC 100
Wireless Power Transfer (WPT) Glossary of Terms (TA 15) 4020 IEC/TC 1004020 IEC/TC 100
4020 ISO/TC 59/SC 13
4020 ISO/TC 59/SC 13
Smart community infrastructures -- Smart transportation for compact cities 5020 ISO/TC 268/SC 1
4020 ISO/TC 268/SC 1
Information technology -- Software and systems engineering -- Tools and methods for product line realization
Information technology -- Software and systems engineering -- Tools and methods for product line testing
Information technology -- Software and systems engineering -- Tools and methods for product line organizational management
Information technology -- Security techniques -- Information security management systems -- Overview and vocabulary
Information technology -- Security techniques -- Electronic discovery -- Part 2: Guidance for governance and management of electronic discovery
Systems and software engineering -- Lifecycle profiles for Very Small Entities (VSEs) -- Part 4-1: Software engineering - Profile specifications: Generic profile group
Systems and software engineering -- Lifecycle profiles for very small entities (VSEs) -- Part 4-3: Service delivery -- Profile specification
Systems and software engineering -- Life cycle processes -- Requirements engineering
Software engineering -- Guidelines for the application of ISO 9001:2015 to computer software
Information technology -- Radio frequency identification for item management -- Unique identification for RF tags -- Part 1: Unique identification for RF tags numbering systems
Information technology -- Radio frequency identification for item management -- Part 2: Unique identification for RF tags registration procedures
Information technology -- Conformance test methods for security service crypto suites -- Part 19: Crypto suite RAMON
Information technology -- Automatic identification and data capture techniques -- Part 21: Crypto suite SIMON security services for air interface communications
Information technology -- Automatic identification and data capture techniques -- Part 22: Crypto suite SPECK security services for air interface communications
Guideline for synchronization of audio and video - Part 1-1: Measurement methods for synchronization of audio and video equipment and systems - General (TA 11)
Guideline for synchronization of audio and video - Part 2: Methods for synchronization of audio and video systems (TA 11)
Universal Serial Bus interfaces for data and power - Part 1-4: Common Components – USB Type-C™ Authentication Specification
Universal serial bus interfaces for data and power - Part 1-3: Common components - USB Type-CTM Cable and Connector Specification
Car multimedia systems and equipment - Drive monitor system Part 2: Camera interfaces and recording methods
Organization of information about construction works -- Information management using building information modelling -- Part 1: Concepts and principles
Organization of information about construction works -- Information management using building information modelling -- Part 2: Delivery phase of the assets
Smart community infrastructures -- Smart transportation using battery-powered buses for public transportation systems to realize the city centers with zero-emission of greenhouse gases and small particles, the quiet environment and safe bus rides
5020 IEC/TC 3
4020 IEC/TC 3
4020 IEC/SC 23G
4020 IEC/SC 23G
5020 IEC/SC 23G
5020 IEC/SC 23G
5020 IEC/SC 23G
Electrical accessories - Cord sets and interconnection cord sets 5020 IEC/SC 23G
4020 IEC/SC 23E
5020 IEC/SC 23E
4020 IEC/SC 23E
5020 IEC/SC 45A
5020 IEC/SC 45A
5020 IEC/SC 45A
4020 IEC/SC 45A
5020 IEC/SC 45A
4020 IEC/SC 45B
4020 IEC/SC 45A
4020 IEC/SC 45A
5020 IEC/SC 45A
4020 IEC/TC 45
4020 ISO/TC 299
4020 IEC/SC 65B
XML Exchange Formats for Programs according to IEC 61131-3 4020 IEC/SC 65B5020 IEC/SC 65E
4020 IEC/SC 65E
FIELD DEVICE INTEGRATION (FDI) – PART 115-2: Profiles – Modbus-RTU 4020 IEC/SC 65E
Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations - Part 12: Buildings and building services
Preparation of information for use (instructions for use) of products – Part 1: Principles and general requirements
Appliance couplers for household and similar general purposes - Part 3: Standard sheets and gauges
Appliance couplers for household and similar general purposes - Part 1: General requirements
Appliance couplers for household and similar general purposes - Part 2-1: Sewing machine couplers
Appliance couplers for household and similar general purposes - Part 2-3: Appliance couplers with a degree of protection higher than IPX0
Appliance couplers for household and similar general purposes - Part 2-4: Couplers dependent on appliance weight for engagement
Circuit-breakers for overcurrent protection for household and similar installations- Part 3: Circuit-breakers for d.c. operation
Residual Direct Current Detecting Device (RDC-DD) to be used for Mode 3 charging of Electric Vehicle
Power frequency overvoltage protective devices for household and similar applications (POP)
Nuclear power plants - Instrumentation, control and electrical power systems important to safety - Separation
Nuclear power plants - Instrumentation and control systems important to safety - Safety logic assemblies used in systems performing category A functions: Characteristics and test methods
Nuclear power plants - Instrumentation systems important to safety - Electrical penetration assemblies in containment structures
Nuclear power plants - Instrumentation, control and electrical power systems - Requirements for static uninterruptible DC and AC power supply systems
Nuclear power plants - Instrumentation and control systems important to safety - Data communication in systems performing category A functions
Radiation protection instrumentation - Installed radiation portal monitors (RPMs) for the detection of illicit trafficking of radioactive and nuclear materials
Nuclear power plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods - Part 6: Insulation resistance
Nuclear power plants - Instrumentation and control important to safety - Management of ageing of sensors and transmitters - Part 2: Temperature sensors
Nuclear power plants - Instrumentation and control systems important to safety - Selection and use of wireless devices
Nuclear instrumentation - Data format for list-mode digital data acquisition used in radiation detection and measurement
Robotics -- Performance criteria and related test methods for service robots -- Part 2: Navigation
Expression of performance of electrochemical analyzers - Part 4: Dissolved oxygen in water measured by membrane covered amperometric sensors
Engineering data exchange format for use in industrial automation systems engineering - Automation Markup Language - Part 1: Architecture and general requirements
FIELD DEVICE INTEGRATION (FDI) – PART 100: Profiles – Generic protocols
5020 IEC/SC 65B
4020 IEC/SC 65B
4020 ISO/TC 299
4020 ISO/TC 299
4020 IEC/TC 66
4020 IEC/TC 66
4020 IEC/TC 66
4020 IEC/TC 66
4020 IEC/CIS/B
4020 IEC/CIS/D
5020 IEC/CIS/F
5020 IEC/CIS/A
4020 IEC/CIS/D
4020 IEC/SC 77A
4020 IEC/TC 82
4020 IEC/TC 82
4020 IEC/TC 82
4020 IEC/TC 82
Test procedure for extended thermal cycling of PV modules 4020 IEC/TC 824020 IEC/TC 82
5020 ISO/TC 44/SC 9
5020 ISO/TC 176/SC 2
Reference conditions and procedures for testing industrial and process measurement transmitters - Part 3: Specific procedures for temperature transmitters
PROCESS ANALYSIS TECHNOLOGY SYSTEMS AS PART OF PROCESS CONTROL SAFETY EQUIPMENT
Medical electrical equipment -- Part 2-77: Particular requirements for the basic safety and essential performance of robotically assisted surgical equipment
Medical electrical equipment -- Part 2-78: Particular requirements for the basic safety and essential performance of medical robots for rehabilitation, assessment, compensation or alleviation
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2-101: Safety requirements for in vitro diagnostic (IVD) medical equipment
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
Industrial, scientific and medical equipment – Measurement of radiated disturbances - Improvement of repeatability for measurements in the frequency range 1-18 GHz
Vehicles, boats and devices with internal combustion engines or traction batteries – Radio disturbance characteristics – Limits and methods of measurement for the protection of off-board receivers
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus
Electric and hybrid road vehicles - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers below 30 MHz
Electromagnetic compatibility (EMC) - Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems
Photovoltaic devices - Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data
Photovoltaic devices - Part 7: Computation of the spectral mismatch correction for measurements of photovoltaic devices
Photovoltaic devices - Part 1-2: Measurement of current-voltage characteristics of bifacial photovoltaic (PV) devices
Measurement procedures for materials used in photovoltaic modules – Part 1-7: Test procedure for the optical durability of transparent polymeric PV packaging materials
Environmental health and safety (EH&S) risk assessment of the PV module through the life cycle - General principles and definitions of terms
Health and safety in welding and allied processes -- Requirements, testing and marking of equipment for air filtration -- Part 3: Determination of the capture efficiency of on-torch welding fume extraction devices
Quality management -- Quality of an organization -- Guidance to achieve sustained success
5020 ISO/PC 288
Knowledge management systems -- Requirements 4020 ISO/TC 2604020 ISO/TC 260
5020 ISO/PC 283
5020 ISO/TC 4/SC 5
5020 ISO/TC 22/SC 31
5020 ISO/TC 22/SC 31
5020 ISO/TC 22/SC 31
4020 ISO/TC 22/SC 31
5020 ISO/TC 22/SC 31
4020 ISO/TC 22/SC 36
4020 ISO/TC 22/SC 36
4020 ISO/TC 22/SC 31
4020 ISO/TC 22/SC 31
4020 ISO/TC 22/SC 31
4020 ISO/TC 22/SC 31
4020 ISO/TC 22/SC 31
4020 ISO/TC 30/SC 2
Round timber -- Visual characteristics -- Methods of determination 5020 ISO/TC 218Metal halide lamps - Performance specification 5020 IEC/SC 34A
5020 IEC/SC 34C
LED modules for general lighting - Safety specifications 5020 IEC/SC 34A4020 IEC/TC 34
4020 IEC/TC 34
4020 IEC/TC 34
4020 IEC/TC 34
5020 IEC/TC 34
5020 IEC/TC 34
5020 IEC/TC 34
Educational organizations -- Management systems for educational organizations -- Requirements with guidance for use
Human resource management -- Guidelines for human capital reporting for internal and external stakeholders
Occupational health and safety management systems -- Requirements with guidance for use
Rolling bearings -- Cylindrical rollers -- Part 2: Boundary dimensions, geometrical product specifications (GPS) and tolerance values for ceramic rollers
Road vehicles -- Vehicle to grid communication interface -- Part 8: Physical layer and data link layer requirements for wireless communication
Road vehicles -- Vehicle to grid communication interface -- Part 4: Network and application protocol conformance test
Road vehicles -- Vehicle to grid communication interface -- Part 5: Physical layer and data link layer conformance test
Road vehicles -- Vehicle to grid communication interface -- Part 1: General information and use-case definition
Road vehicles -- Controller area network (CAN) conformance test plan -- Part 2: High-speed medium access unit -- Conformance test plan
Road vehicles -- Information for first and second responders -- Part 3: Emergency response guide template
Road vehicles -- Information for first and second responders -- Part 2: Rescue sheet for buses, coaches and heavy commercial vehicles
Road vehicles -- Extended vehicle (ExVe) 'web services' -- Part 1: ExVe content
Road vehicles -- Extended vehicle (ExVe) 'web services' -- Part 3: ExVe security
Road vehicles -- Extended vehicle (ExVe) 'web services' -- Part 2: ExVe access
Road vehicles -- Extended vehicle (ExVe) 'web services' -- Part 4: ExVe control
Road vehicles -- Information for remote diagnostic support -- General requirements, definitions and use cases
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full -- Part 6: Wedge meters
Lamp controlgear - Part 2-14: Particular requirements for DC and/or AC supplied electronic controlgear for fluorescent induction lamps
Amendment 1 - Digital addressable lighting interface - Part 101: General requirements - System components
Amendment 1 - Digital addressable lighting interface - Part 102: General requirements - Control gear
Digital addressable lighting interface - Part 103: General requirements - Control devices
Digital addressable lighting interface - Part 220: Particular requirements for control gear - Centrally Supplied Emergency Operation (device type 19)
Digital addressable lighting interface - Part 217: Particular requirements for control gear - Thermal gear protection (device type 16)
Digital addressable lighting interface - Part 218: Particular requirements for control gear - Dimming curve selection (device type 17)
Digital addressable lighting interface - Part 207: Particular requirements for control gear - LED modules (device type 6)
5020 IEC/TC 34
5020 IEC/TC 34
5020 IEC/TC 34
Amendment 2 - LED modules for general lighting - Performance requirements 4020 IEC/SC 34A
Risk management - Risk assessment techniques 4020 IEC/TC 56Risk management - Risk assessment techniques 4020 IEC/TC 56
5020 IEC/TC 20
5020 IEC/TC 20
5020 IEC/TC 20
5020 IEC/TC 20
5020 IEC/TC 20
5020 IEC/TC 20
5020 IEC/TC 20
5020 IEC/TC 13
4020 IEC/TC 85
4020 IEC/TC 85
4020 IEC/TC 85
4020 IEC/TC 85
4020 IEC/TC 85
4020 IEC/TC 85
Digital addressable lighting interface - Part 222: Particular requirements for control gear - Thermal lamp protection (device type 21)
Digital addressable lighting interface - Part 216: Particular requirements for control gear - Load referencing (device type 15)
Amendment 1 - General lighting - Light emitting diode (LED) products and related equipment - Terms and definitions
Tests for electric cables under fire conditions - Circuit integrity - Part 1: Test method for fire with shock at a temperature of at least 830°C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter exceeding 20 mm
Tests for electric cables under fire conditions - Circuit integrity - Part 3: Test method for fire with shock at a temperature of at least 830°C for cables of rated voltage up to and including 0,6/1,0 kV tested in a metal enclosure
Tests for electric cables under fire conditions - Circuit integrity - Part 2: Test method for fire with shock at a temperature of at least 830°C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter not exceeding 20mm
Test on gases evolved during combustion of materials from cables - Part 3: Measurement of low level of halogen content by ion chromatography
Compression and mechanical connectors for power cables - Part 1-1: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages up to 1 kV (Um = 1,2 kV) tested on non-insulated conductors
Compression and mechanical connectors for power cables - Part 1-2: Test methods and requirements for insulation piercing connectors for power cables for rated voltages up to 1 kV (Um = 1,2 kV) tested on insulated conductors
Compression and mechanical connectors for power cables - Part 1-3: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages above 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) tested on non-insulated conductors
Electricity metering - Payment systems - Part 41: Standard transfer specification (STS) - Application layer protocol for one-way token carrier systems
Direct acting indicating analogue electrical measuring instruments and their accessories. Part 9: Recommended test methods
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 1: General requirements
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 2: Insulation resistance
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 3: Loop impedance
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 4: Resistance of earth connection and equipotential bonding
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 5: Resistance to earth
4020 IEC/TC 85
4020 IEC/TC 85
4020 ISO/TC 67/SC 2
4020 ISO/TC 67/SC 2
4020 ISO/TC 67/SC 2
4020 ISO/TC 172/SC 3
4020 IEC/SC 59C
5020 IEC/SC 59K
4020 IEC/SC 59L
Road vehicles -- Fuse-links -- Part 6: Single-bolt fuse-links 4020 ISO/TC 22/SC 324020 ISO/TC 22/SC 32
5020 ISO/TC 22/SC 32
5020 ISO/TC 22/SC 32
5020 ISO/TC 22/SC 32
5020 ISO/TC 22/SC 32
4020 ISO/TC 22/SC 32
4020 ISO/TC 22/SC 32
4020 ISO/TC 22/SC 32
Road vehicles -- Automotive cables -- Part 2: Test methods 4020 ISO/TC 22/SC 324020 ISO/TC 22/SC 32
4020 ISO/TC 22/SC 32
4020 ISO/TC 22/SC 32
4020 ISO/TC 22/SC 32
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 6: Effectiveness of residual current devices (RCD) in TT, TN and IT systems
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 7: Phase sequence
Petroleum and natural gas industry -- Pipeline transportation systems -- Pipeline integrity management specification -- Part 2: Full-life cycle integritymanagement for offshore pipeline
Petroleum and natural gas industry -- Pipeline transportation systems -- Pipeline integrity management specification -- Part 1: Full-life cycle integrity management for onshore pipeline
Petroleum and natural gas industries -- External coatings for buried or submerged pipelines used in pipeline transportation systems -- Part 11: Coating repairs on rehabilitation
Optics and photonics -- Optical coatings -- Part 8: Coatings used for laser optics
Amendment 2 - Household electric direct-acting room heaters - Methods for measuring performance
Amendment 2 - Household microwave ovens - Methods for measuring performance
Comfort fans and regulators for household and similar purposes – Methods for measuring performance
Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 2: Absorber-lined shielded enclosure
Road vehicles -- Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles -- Part 1: General
Road vehicles -- Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles -- Part 3: Mechanical loads
Road vehicles -- Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles -- Part 4: Climatic loads
Road vehicles -- Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles -- Part 5: Chemical loads
Road vehicles -- Automotive cables -- Part 5: Dimensions and requirements for 600 V a.c. or 900 V d.c., 1000 V a.c. or 1500 V d.c. single core copper conductor cables
Road vehicles -- Automotive cables -- Part 8: Dimensions and requirements for 30 V a.c. or 60 V d.c. round, sheathed, screened and unscreened multi and single core aluminium conductor cables
Road vehicles -- Automotive cables -- Part 1: Terminology and design guidelines
Road vehicles -- Automotive cables -- Part 3: Dimensions and requirements for 30 V a.c. or 60 V d.c. single core copper conductor cables
Road vehicles -- Automotive cables -- Part 6: Dimensions and requirements for 600 V a.c. or 900 V d.c., 1000 V a.c. or 1500 V d.c. single core aluminium conductor cables
Road vehicles -- Automotive cables -- Part 7: Dimensions and requirements for 30 V a.c. or 60 V d.c. round, sheathed, screened and unscreened multi and single core copper conductor cables
Road vehicles -- Automotive cables -- Part 10: Dimensions and requirements for 600 V a.c. or 900 V d.c., 1000 V a.c. or 1500 V d.c. round, sheathed, screened and unscreened multi and single core aluminium conductor cables
4020 ISO/TC 22/SC 32
4020 ISO/TC 22/SC 32
Interpreting services -- Legal interpreting -- Requirements 4020 ISO/TC 37/SC 54020 ISO/TC 130
International Electrotechnical Vocabulary - Part 485: Fuel cell technologies 4020 IEC/TC 1
4020 ISO/TC 146/SC 5
4020 IEC/TC 31
5020 IEC/SC 62D
4020 IEC/SC 62A
5020 IEC/SC 62D
5020 IEC/SC 62D
5020 IEC/SC 62D
4020 IEC/SC 62B
4020 IEC/SC 62B
4020 IEC/SC 62C
4020 IEC/SC 62C
Health software - Software life cycle processes 4020 IEC/SC 62A4020 IEC/SC 62B
4020 IEC/SC 62D
4020 IEC/SC 62D
4020 IEC/SC 62D
4020 IEC/SC 62D
5020 IEC/SC 62D
5020 IEC/SC 62D
Road vehicles -- Automotive cables -- Part 4: Dimensions and requirements for 30 V a.c. and 60 V d.c. single core aluminium conductor cables
Road vehicles -- Automotive cables -- Part 9: Dimensions and requirements for 600 V a.c. or 900 V d.c., 1000 V a.c. or 1500 V d.c. round, sheathed, screened and unscreened multi and single core copper conductor cables
Graphic technology -- Determination of the energy consumption of digital printing devices including transitional and related modes
Air quality -- Environmental meteorology -- Part 3: Ground-based remote sensing of wind by continuous-wave doppler lidar
Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t"
Medical electrical equipment - Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators
Medical electrical equipment - Part 4-3: Guidance and interpretation - Considerations of unaddressed safety aspects in the third edition of IEC 60601-1 and proposals for new requirements
Medical Electrical Equipment - Part 2-76: Particular requirements for the basic safety and essential performance of low energy ionized gas haemostasis equipment
Medical electrical equipment - Part 2-16: Particular requirements for basic safety and essential performance of haemodialysis, haemodiafiltration and haemofiltration equipment
Medical electrical equipment - Part 2-39: Particular requirements for basic safety and essential performance of peritoneal dialysis equipment
Amendment 2 - Medical electrical equipment - Part 2-43: Particular requirements for the basic safety and essential performance of X-ray equipment for interventional procedures
Evaluation and routine testing in medical imaging departments - Part 3-5: Acceptance tests and and Constancy tests - Imaging performance of computed tomography X-ray equipment
Nuclear medicine instrumentation - Routine tests - Part 2: Scintillation cameras and single photon emission computed tomography imaging
Nuclear medicine instrumentation - Routine tests - Part 4: Radionuclide calibrators
Methods for calculating Size Specific Dose Estimate (SSDE) on Computed Tomography
Medical Electrical Equipment - Part 2-78: Particular requirements for the basic safety and essential performance of medical robots for rehabilitation, assessment, compensation or alleviation
Medical Electrical Equipment - Part 2-77: Particular requirements for the basic safety and essential performance of robotically assisted surgical equipment
Medical Electrical Equipment - Part 2-78: Particular requirements for the basic safety and essential performance of medical robots for rehabilitation, assessment, compensation or alleviation
Medical Electrical Equipment - Part 2-77: Particular requirements for the basic safety and essential performance of robotically assisted surgical equipment
Medical electrical equipment - Part 2-49: Particular requirements for the basic safety and essential performance of multifunction patient monitors
Medical electrical equipment - Part 2-30: Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers
5020 IEC/SC 62D
Dentistry -- Mixing machines for dental amalgam 5020 ISO/TC 106/SC 64020 ISO/TC 84
Dentistry -- Graphical symbols for dental equipment 5020 ISO/TC 106/SC 6Dentistry -- Central suction source equipment 5020 ISO/TC 106/SC 6Sterile single-use intravascular introducers, dilators and guidewires 4020 ISO/TC 84Non-active surgical implants -- Mammary implants -- Particular requirements 5020 ISO/TC 150
Implants for surgery -- Minimum data sets for surgical implants 4020 ISO/TC 150Non-active surgical implants -- Implant coating -- Part 1: General requirements 5020 ISO/TC 150
5020 ISO/TC 150
Walking trolleys - Requirements and test methods 4020 ISO/TC 1734020 ISO/TC 173
5020 IEC/TC 9
4020 IEC/TC 9
Railway applications - Electromagnetic compatibility - Part 1: General 5020 IEC/TC 95020 IEC/TC 9
5020 IEC/TC 9
5020 IEC/TC 9
5020 IEC/TC 9
5020 IEC/TC 9
4020 IEC/TC 9
5020 IEC/TC 9
Railway applications - Rolling stock - Rules for installation of cabling 5020 IEC/TC 94020 IEC/TC 18
4020 IEC/TC 18
Mobile and fixed offshore units - Electrical installations - Part 2: System design 4020 IEC/TC 18
Mobile and fixed offshore units - Electrical installations - Part 3: Equipment 4020 IEC/TC 18
Mobile and fixed offshore units - Electrical installations - Part 4: Cables 4020 IEC/TC 18
Mobile and fixed offshore units - Electrical installations - Part 5: Mobile units 4020 IEC/TC 18
Mobile and fixed offshore units - Electrical installations - Part 6: Installation 4020 IEC/TC 18
4020 IEC/TC 18
4020 ISO/TC 8
4020 ISO/TC 8
4020 ISO/TC 8
Amendment 2 - Medical electrical equipment - Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation
Sterile hypodermic syringes for single use -- Part 4: Syringes with re-use prevention feature
Implants for surgery -- Cleanliness of orthopedic implants -- General requirements
Assistive products -- Guidelines on cognitive accessibility -- Daily time management
Electronic railway equipment - Train communication network (TCN) - Part 2-6: On-board to ground communication
Railway applications - Rolling stock - Protective provisions against electrical hazards
Railway applications - Electromagnetic compatibility - Part 2: Emission of the whole railway system to the outside world
Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and complete vehicle
Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus
Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus
Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus
Railway applications - Fixed installations - DC surge arresters and voltage limiting devices - Part 2: Voltage limiting devices
Railway applications - Batteries for auxiliary power supply systems - Part 1: General requirements
Electrical installations in ships - Part 302-2: Marine Power switchgear and controlgear assemblies
Mobile and fixed offshore units - Electrical installations - Part 1: General requirements and conditions
Mobile and fixed offshore units - Electrical installations - Part 7: Hazardous areas
Ships and marine technology -- Aquatic nuisance species -- Part 1: Ballast water discharge sample port
Ships and marine technology -- Cutter suction dredger supervisory and control system
Ships and marine technology -- Hopper dredger supervisory and control system
Ships and marine technology -- Grab dredger supervisory and control system 4020 ISO/TC 8
SECTIUNEA 4, CAPITOLUL 1
Standarde române originale în vigoare ce trebuie supuse procedurii de examinare
Minister CT Indicativ SR
1 MADR 97 SR 4895-5:19992 MADR 97 SR 4895-4:1997
3 MADR 97 SR 4895-6:19994 MADR 97 STAS 13076-925 MADR 97 STAS 13084-926 MADR 97 SR 13159:19937 MADR 97 SR 13160:19938 MADR 97 SR 13165:19939 MADR 97 SR 13244:1999
10 MADR 97 SR 13332:199611 ME 9 STAS 4264-8612 ME 9 STAS 6797-8113 ME 9 STAS 7208-8314 ME 9 STAS 10802-80
15 ME 11 STAS 552-8916 ME 11 STAS 3184/3-85
17 ME 11 STAS 3184/4-88
18 ME 11 STAS 4002-74
19 ME 42 STAS 436-9020 ME 42 SR 438-2:201221 ME 42 SR 438-4:2012
22 ME 42 SR 438-1:2012
23 ME 42 SR 438-3:201224 ME 42 STAS 505-8625 ME 42 STAS 564-8626 ME 42 STAS 794-9027 ME 46 STAS 4485-7628 ME 46 STAS 9144/7-7229 ME 46 STAS 9144/1-8630 ME 46 STAS 9144/2-8631 ME 46 STAS 9320-7832 ME 46 STAS 9472/6-7333 ME 46 STAS 9706-7434 ME 55 SR 74:199435 ME 55 STAS 185/6-89
36 ME 55 STAS 185/2-89
37 ME 55 STAS 185/4-90
38 ME 55 STAS 185/1-89
39 ME 55 STAS 185/3-89
40 ME 55 STAS 185/5-89
41 ME 59 STAS 139-7942 ME 59 STAS 250-61
Nr crt
43 ME 59 STAS 253-7744 ME 59 STAS 350-8245 ME 59 STAS 353-8646 ME 59 STAS 354-6747 ME 59 STAS 358-9048 ME 59 STAS 359-9149 ME 59 STAS 360-6750 ME 59 STAS 361-8051 ME 76 STAS 6581-81
52 ME 76 STAS 6635-87
53 ME 76 STAS 6688-86
54 ME 76 STAS 6927-8155 ME 76 STAS 7326-74
56 ME 76 STAS 7327-8057 ME 76 STAS 7636-8858 ME 76 STAS 9361-90
59 ME 76 STAS 9421-8760 ME 76 STAS 9815/1-91
61 ME 76 STAS 11040-88
62 ME 76 STAS 12880-9063 ME 77 STAS 269-7764 ME 77 STAS 495/3-8065 ME 77 STAS 495/2-7666 ME 77 STAS 495/1-7667 ME 77 STAS 496-8068 ME 77 STAS 657-7669 ME 77 STAS 839/6-87
70 ME 78 STAS 839/1-87
71 ME 78 STAS 839/2-8672 ME 78 STAS 839/4-87
73 ME 78 STAS 839/3-86
74 ME 78 STAS 839/5-87
75 ME 78 STAS 843/2-8376 ME 85 SR 1944-1:1999
77 ME 85 SR 1944-2:199978 ME 85 SR 1944-3:200079 ME 85 SR 1944-4:199980 ME 88 SR 3788:199481 ME 88 STAS 6627-8982 ME 88 STAS 7003-9083 ME 88 SR 10437:2000
84 MM 53 STAS 1253-8085 MM 53 STAS 2211-8086 MM 53 SR 9081:199587 MM 53 STAS 10195-7588 MM 53 STAS 10329-7589 MM 53 STAS 10331-9290 MM 53 STAS 10812-7691 MM 53 STAS 10813-7692 MM 360 SR 13330:2007
93 MM 360 SR 13343:1996
94 MM 360 SR 13350:199695 MM 360 SR 13387:1997
96 MM 360 SR 13481:2003
97 MM 360 SR 13493:2004
98 MM 360 SR 13526:2008
SECTIUNEA 4, CAPITOLUL 1
Standarde române originale în vigoare ce trebuie supuse procedurii de examinare
Titlu
Tutun şi produse de tutun. Determinarea conţinutului de azot total
Tutun şi produse de tutun. Determinarea conţinutului total de proteineTutun. Determinarea conţinutului de nervură principalăTutun. Determinarea masei unităţii de suprafaţă a limbului foliarTutun şi produse din tutun. Determinarea conţinutului de potasiuTutun şi produse din tutun. Determinarea anionului clorTutun. Seminţe pentru însămânţare
Tutun şi produse de tutun. Determinarea indicelui de fermentareSonerii şi buzere electrice. Condiţii tehnice de calitateLimitatoare de cursă pentru instalaţii de ridicat şi transportat. Condiţii tehnice de calitateElectromagneţi de acţionare. Condiţii tehnice speciale de calitate
Doze de aparat şi doze de ramificaţie pentru instalaţii electrice. Dimensiuni
Semifabricate de oţel. Blumuri, sleburi şi tagleProduse de oţel pentru armarea betonului. Partea 2: Sârmă rotundă trefilată
Produse de oţel pentru armarea betonului. Partea 3: Plase sudateOţel laminat la cald. Table groase. Condiţii tehnice de calitateOţel laminat la cald. Oţel UOţel laminat la cald. Oţel rotund pentru organe de asamblare. DimensiuniPulberi metalice. Pulberi de zincZinc praf. Determinarea granulaţieiPulbere de zinc. Indicaţii generale pentru efectuarea analizei chimicePulbere de zinc. Determinarea conţinutului de zinc metalicPulberi metalice. Pulberi de fierAliaje dure sinterizate. Determinarea rezistivităţiiPulberi metalice. Pulberi de tantalDesene tehnice. Împăturire
Notarea filetelorConuri pentru scule. Pene de evacuare pentru cozi metrice şi Morse. Dimensiuni
Tutun şi produse de tutun. Determinarea conţinutului în zaharuri reducătoare totale, zaharuri solubile şi substanţe reducătoare totale. Metoda manganometrică
Tutun şi produse de tutun. Determinarea conţinutului de polifenoli, exprimat ca acid clorogenic, prin metoda spectrometrică
Fiabilitatea aparatajului de joasă tensiune. Metoda statistică de determinare a anduranţei mecanice limitată la nivel de fiabilitate specificat
Prize, fişe şi cuple pentru instalaţii electrice până la 380 V curent alternativ şi 250 V curent continuu şi până la 25 A. Forme şi dimensiuni
Prize, fişe şi cuple pentru instalaţii electrice până la 380 V curent alternativ şi 250 V curent continuu până la 25 A. Calibre de verificare a prizelor şi fişelor până la 250 V şi până la 16 A
Materiale auxiliare pentru reţele şi instalaţii electrice. Cleme de şir pentru circuite cu conductoare din cupru şi aluminiu. Condiţii tehnice speciale de calitate
Produse de oţel pentru armarea betonului. Partea 4: Sârmă cu profil periodic obţinută prin deformare plastică la rece
Produse de oţel pentru armarea betonului. Partea 1: Oţel beton laminat la cald. Mărci şi condiţii tehnice de calitate
Instalaţii sanitare, de încălzire centrală, de ventilare şi de gaze naturale. Aparate de măsurat şi de control. Semne convenţionale
Instalaţii sanitare, de încălzire centrală, de ventilare şi de gaze naturale. Fitinguri şi piese auxiliare pentru conducte. Semne convenţionale
Instalaţii sanitare, de încălzire centrală, de ventilare şi de gaze naturale. Obiecte de uz gospodăresc, corpuri de încălzire, guri de aer. Semne convenţionale
Instalaţii sanitare, de încălzire centrală, de ventilare şi de gaze naturale. Conducte pentru fluide. Semne şi culori convenţionale
Instalaţii sanitare, de încălzire centrală, de ventilare şi de gaze naturale. Armături. Semne convenţionale
Instalaţii sanitare, de încălzire centrală, de ventilare şi de gaze naturale. Agregate, aparate, rezervoare. Semne convenţionale
Conuri pentru scule. Racordarea la sculă a conurilor metrice şi MorseCuţite de strung, raboteză şi morteză. TerminologieCuţite de strung cu tăiş din oţel rapid. Cuţite pentru retezat. DimensiuniCuţite de strung cu tăiş din oţel rapid. Cuţite lamă pentru retezat. DimensiuniCuţite de strung cu tăiş din oţel rapid. Cuţit frontal. DimensiuniCuţite de strung cu tăiş din oţel rapid. Cuţit lateral. DimensiuniCuţite de morteză cu tăiş din oţel rapid. Cuţit pentru canale de pană. DimensiuniCuţite de morteză cu tăiş din oţel rapid. Cuţit pentru canelat. Dimensiuni
Pistoane din aluminiu pentru motoare de autovehicule şi compresoare. Condiţii tehnice de calitate
Segmenţi de piston pentru motoare de autovehicule şi compresoare. Metode de încercarePulverizatoare pentru motoare cu aprindere prin compresie. Reguli şi metode de încercare
Motoare cu ardere internă. Pompe de injecţie în linie. Încercări pe standElement filtrat, cu hârtie, pentru motorinăMotoare cu ardere internă. Filtre fine pentru uleiul de ungere. Condiţii tehnice generale de calitate
Motoare cu aprindere prin comprimare. Injectoare mărimea S. DimensiuniRadiatoare de apă pentru motoare cu ardere internă, cu piston. Condiţii tehnice generale de calitate
Motoare cu ardere internă, cu piston. Metodă de măsurare a nivelurilor de zgomotUnelte agricole. SapeCazmale forjate. Tipuri şi dimensiuniCazmale presate. Tipuri şi dimensiuniCazmale. Condiţii tehnice generale de calitateUnelte de mână. Furci pentru agriculturăGreble pentru grădinărie
Valve pentru biciclete. DimensiuniValve tip AC şi AT pentru pneuri de autocamioane şi mijloace de transport uzinal. Dimensiuni
Valve tip M pentru camerele de aer ale motoretelor, motocicletelor şi scuterelor. Dimensiuni
Vehicule rutiere, tractoare şi maşini agricole. Accesorii de valve. Dimensiuni
Instalaţii de ridicat. Cârlige simple forjate, cu tijă. Partea 2: Cârlige cu tija neprelucratăInstalaţii de ridicat. Cârlige simple forjate, cu tijă. Partea 3: Cârlige cu tijă filetatăInstalaţii de ridicat. Cârlige simple forjate cu tijă. Partea 4: Filet rotundFoarfece de uz general. Condiţii tehnice generale de calitatePensule pentru vopsitorie şi pictură. Condiţii tehnice generale de calitatePerii din păr, fire sintetice şi fibre vegetale. Condiţii tehnice generale de calitate
Meteorologie. Mărimi caracteristice aerului umedRecalcularea masei materialelor şi produselor higroscopiceCalitatea aerului. VocabularPuritatea aerului. Determinarea pulberilor sedimentabilePuritatea aerului. Determinarea bioxidului de azotPuritatea aerului. Principii şi reguli generale de supraveghere a calităţii aeruluiPuritatea aerului. Determinarea amoniaculuiPuritatea aerului. Determinarea pulberilor în suspensieSalubrizarea localităţilor. Termeni şi definiţii
Pompe de injecţie pentru motoare termice. Pompe de alimentare cu piston. Parametri şi dimensiuni principale
Motoare cu ardere internă pentru autovehicule şi tractoare agricole. Reguli şi metode de încercare pe banc
Aparate pentru măsurarea opacităţii gazelor de evacuare la motoarelor cu aprindere prin comprimare
Valve hidropneumatice tip THP pentru camerele de aer ale tractoarelor, maşinilor agricole şi remorcilor agricole. Dimensiuni
Valve pentru camere de aer şi pentru anvelope fără camere de aer. Condiţii tehnice generale de calitate
Valve tip C pentru camerele de aer ale autobuzelor, vehiculelor utilitare şi vehiculelor tractate. Dimensiuni
Instalaţii de ridicat. Cârlige simple forjate, cu tijă. Partea 1: Condiţii tehnice pentru materiale, execuţie şi livrare
Articole de uz casnic de material plastic care intră în contact cu alimentele. Condiţii tehnice generale de calitate
Salubrizarea localităţilor. Deşeuri urbane şi rurale. ClasificareSalubrizarea localităţilor. Deşeuri urbane. Prescripţii de proiectare a punctelor pentru precolectare
Caracterizarea deşeurilor. Metodologie de caracterizare a deşeurilor menajere - ROMECOM
Salubrizarea localităţilor. Deşeuri urbane. Prescripţii generale de proiectare pentru depozitarea controlată
Recipiente de colectare a deşeurilor înţepătoare-tăietoare rezultate din activităţi medicale. Specificaţii şi încercări
Salubrizarea localităţilor. Deşeuri urbane. Prescripţii pentru proiectarea punctelor de precolectare selectivă
SECTIUNEA 4, CAPITOLUL 2
Teme de standarde române originale noi propuse a fi elaborate
Minister CT Indicativ SR Titlu
1 187 SR 1848-1:2018
2 187 SR 1848-2:2018
3 187 SR 1848-3:2018
4 187 SR 1848-3:2018
5 187 SR 1910:2017
6 187 SR 1948-1:2018
7 187 SR 1948-2:2018
8 187 SR 2920:2017 Poduri de şosea. Supravegheri şi revizii tehnice
9 187 SR 5626:2017 Poduri. Terminologie
10 187 SR 11348:2017
11 187 SR 12313:2017
12 187 SR 12313:2017
13 187 SR 12504:2017
14 187 SR 13576:2018 Mixturi bituminoase stocabile. Specifica?ii de material
15 ME 165 SR EN 50341-2-xx
16 ME 298 SR EN 13624:2014/C91:2018
17 MM 360 SR 13493:2018
Nr crt
MDRAPFE
Semnalizare rutieră. Indicatoare şi mijloace de semnalizare rutieră. Partea 1: Clasificare, simboluri şi amplasare
MDRAPFE
Semnalizare rutieră. Indicatoare şi mijloace de semnalizare rutieră. Partea 2: Condiţii tehnice
MDRAPFE
Semnalizare rutieră. Indicatoare şi mijloace de semnalizare rutieră. Partea 3: Scriere, mod de alcătuire
MDRAPFE
Semnalizare rutieră. Indicatoare şi mijloace de semnalizare rutieră. Partea 3: Scriere, mod de alcătuire
MDRAPFE
Poduri de beton, beton armat şi beton precomprimat. Suprastructură. Condiţii generale de execuţie
MDRAPFE
Lucrări de drumuri. Stâlpi de ghidare şi parapete. Prescripţii generale de proiectare şi amplasare pe drumuri
MDRAPFE
Lucrări de drumuri. Parapete pe poduri. Prescripţii generale de proiectare şi amplasare
MDRAPFE
MDRAPFE
MDRAPFE
Lucrări de drumuri. Îmbrăcăminţi bituminoase pentru calea de pod. Condiţii tehnice generale de calitate
MDRAPFE
Poduri de cale ferată şi şosea. Încercarea pe stand a elementelor prefabricate din beton, beton armat şi beton precomprimat
MDRAPFE
Poduri de cale ferată şi şosea. Încercarea pe stand a elementelor prefabricate din beton, beton armat şi beton precomprimat
MDRAPFE
Poduri de cale ferată, de şosea şi pasarele. Încercarea suprastructurilor cu acţiuni de probă
MDRAPFE
Linii electrice aeriene mai mari de 45 kV, curent alternativ. Partea 2: Lista normativelor naţionale
Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity in the medical area - Test method and requirements (phase 2, step 1)
Caracterizarea deşeurilor. Metodologie de caracterizare a deşeurilor menajere - ROMECOM
SECTIUNEA 5, CAPITOLUL 1
Minister CT Titlu TC
1 MADR 180 ISO/TS 22003:2013 ISO/TC 34/SC 17
2 MAP 52 ISO 9174:1998 ISO/TC 147/SC 2
3 MCSI 208 ISO/IEC 27003:2017
4 MCSI 208 ISO/IEC 27004:2016
5 MCSI 208 ISO/IEC 27006:2015
6 MCSI 208
7 136 IEC/TC 64
8 147 ISO 16494:2014 ISO/TC 86/SC 6
9 201 ISO 13348:2007 ISO/TC 117
10 ME 55 ISO 3864-4:2011 ISO/TC 145/SC 2
11 ME 56 ISO 2859-3:2005 ISO/TC 69/SC 5
12 ME 56 ISO 3534-2:2006 ISO/TC 69/SC 1
13 ME 59 ISO 15243:2017 ISO/TC 4
14 ME 97 ISO 8243:2013 Cigarettes -- Sampling ISO/TC 126
15 ME 97 ISO 10315:2013 ISO/TC 126
16 ME 218 ISO 8133:2014 ISO/TC 131/SC 3
17 ME 357 ISO 12963:2017 ISO/TC 158
18 ME 357 ISO/TC 193
Standarde internaţionale ISO-IEC propuse a se adopta ca standarde române prin publicarea versiunii române
Nr crt
Indicativ international
Food safety management systems -- Requirements for bodies providing audit and certification of food safety management systems
Water quality -- Determination of chromium -- Atomic absorption spectrometric methods
Information technology -- Security techniques -- Information security management systems -- Guidance
ISO/IEC JTC 1/SC 27
Information technology -- Security techniques -- Information security management -- Monitoring, measurement, analysis and evaluation
ISO/IEC JTC 1/SC 27
Information technology -- Security techniques -- Requirements for bodies providing audit and certification of information security management systems
ISO/IEC JTC 1/SC 27
ISO/IEC 27034-1:2011
Information technology -- Security techniques -- Application security -- Part 1: Overview and concepts
ISO/IEC JTC 1/SC 27
MDRAPFE
IEC TR 60479-5:2007/C1:2013
Corrigendum 1 - Effects of current on human beings and livestock - Part 5: Touch voltage threshold values for physiological effects
MDRAPFE
Heat recovery ventilators and energy recovery ventilators -- Method of test for performance
MDRAPFE
Industrial fans -- Tolerances, methods of conversion and technical data presentation
Graphical symbols -- Safety colours and safety signs -- Part 4: Colorimetric and photometric properties of safety sign materials
Sampling procedures for inspection by attributes -- Part 3: Skip-lot sampling procedures
Statistics -- Vocabulary and symbols -- Part 2: Applied statistics
Rolling bearings -- Damage and failures -- Terms, characteristics and causes
Cigarettes -- Determination of nicotine in smoke condensates -- Gas-chromatographic method
Hydraulic fluid power -- Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) compact series
Gas analysis -- Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration
ISO/TR 15403-2:2006
Natural gas - Natural gas for use as a compressed fuel for vehicles -- Part 2: Specification of the quality
19 ME 357 ISO/TR 26762:2008 ISO/TC 193/SC 3
20 MEN 229 ISO 1086:1991 Information and documentation -- Title leaves of books ISO/TC 46
21 MEN 229 ISO 6357:1985 ISO/TC 46
22 MEN 229 ISO/TR 26122:2008 ISO/TC 46/SC 11
Natural gas -- Upstream area -- Allocation of gas and condensate
Documentation -- Spine titles on books and other publications
Information and documentation -- Work process analysis for records
SECTIUNEA 5, CAPITOLUL 2
Minister CT IndicativDocRef Titlu_EN
1 MCSI 208 ISO/IEC 27031:2011
2 ME 56 ISO 10667-1:2011
3 ME 103 ISO 8559-1:2017
4 MEN 229 ISO 690:2010
5 MEN 229 ISO 25964-1:2011
6 MEN 229 ISO 27729:2012
7 MEN 229 ISO/TR 28118:2009
8 MMJS 176 IEC 61482-2:2009
9 MMJS 227 ISO 11613:2017
Standarde internaţionale ISO-IEC propuse a se adopta ca standarde române prin metoda filei de confirmare
Nr crt
Information technology -- Security techniques -- Guidelines for information and communication technology readiness for business continuity
Assessment service delivery -- Procedures and methods to assess people in work and organizational settings -- Part 1: Requirements for the client
Size designation of clothes -- Part 1: Anthropometric definitions for body measurement
Information and documentation -- Guidelines for bibliographic references and citations to information resources
Information and documentation -- Thesauri and interoperability with other vocabularies -- Part 1: Thesauri for information retrieval
Information and documentation -- International standard name identifier (ISNI)
Information and documentation -- Performance indicators for national libraries
Live working - Protective clothing against the thermal hazards of an electric arc - Part 2: Requirements
Protective clothing for firefighter's who are engaged in support activities associated with structural fire fighting -- Laboratory test methods and performance
TC
ISO/IEC JTC 1/SC 27
ISO/TC 260
ISO/TC 133
ISO/TC 46/SC 9
ISO/TC 46/SC 9
ISO/TC 46/SC 9
ISO/TC 46/SC 8
IEC/TC 78
ISO/TC 94/SC 14
Standarde internaţionale ISO-IEC propuse a se adopta ca standarde române prin metoda filei de confirmare
MinisterMADRMAIMCMDRAPMECRMAMENCSMMFPSPVMMAPMSMCSIMT
Directiva
1015/2010
1016/2010
1060/2010
107/2009
1194/2012
1275/2008
1907/2006
2014/53/EU 1999/5/EC
2001/16/EC2001/95/EC2003/2003
2003/44/EC
223/2012
2002/40/EC2004/22/EC
2006/42/EC2007/23/EC
2007/47/EC
2008/57/EC
2009/125/EC
2009/105/EC 2014/29/EU
2009/142/EC2009/48/EC2009/128/EC
2010/30/EU2011/65/EU2013/53/EU 94/25/EC
2014/31/EU2014/33/EU 95/16/EC
2014/34/EU 94/9/EC
2014/68/EU
2015/1095
2016/2281
206/2012
244/2009
245/2009
278/2009
305/2011
392/2012
547/2012
548/2014552/2004
65/2014
2014/30/EU 2004/108/EC
2014/35/EU 2006/95/EC
66/2014
617/2013
640/2009
641/2009643/2009
665/2013
666/2013
765/200889/686/EEC
811/2013
812/2013
813/2013
814/2013
90/385/EEC
92/42/EEC
92/75/EEC93/42/EEC
93/95/EEC
96/60/EC
97/23/EC97/67/EC
98/79/EC
932/2012
DenumireMinisterul Agriculturii şi Dezvoltării RuraleMinisterul Afacerilor InterneMinisterul CulturiiMinistrul Dezvoltării Regionale şi Administraţiei PubliceMin Economiei, Comerţului şi Relaţiilor cu Mediul de AfaceriMin Educaţiei Naţionale şi Cercetării ŞtiinţificeMinisterul Muncii, Familiei, Protecţiei Sociale şi Persoanelor VârstniceMinistrul Mediului, Apelor şi PădurilorMinisterul SanătăţiiMin Comunicaţiilor şi pentru Societatea InformaţionalăMinisterul Transporturilor
Descriere
Directiva 1999/5/EC privind echipamentele radio și echipamentele terminale de telecomunicații
Securitatea generală a produselor (GPS)Regulamentul (CE) 2003/2003 al Parlamentului European și al Consiliului din 13 octombrie 2003 privind îngrășămintele
Directiva privind mijloacele de măsurare
Pyrotechnic articles directive
Regulamentul (UE) nr. 1015/2010 al Comisiei din 10 noiembrie 2010 de implementare a Directivei 2009/125/CE a Parlamentului European și a Consiliului cu privire la cerințele de proiectare ecologică aplicabile mașinilor de spălat rufe de uz casnic
Regulamentul (UE) nr. 1016/2010 al Comisiei din 10 noiembrie 2010 de implementare a Directivei 2009/125/CE a Parlamentului European și a Consiliului cu privire la cerințele de proiectare ecologică aplicabile mașinilor de spălat vase de uz casnic
Completare a Directivei 2010/30/UE a Parlamentului European și a Consiliului cu privire la cerințele de etichetare energetică a aparatelor frigorifice de uz casnic
Regulamentul (CE) nr. 107/2009 al Comisiei din 4 februarie 2009 de implementare a Directivei 2005/32/CE a Parlamentului European și a Consiliului în ceea ce privește cerințele de proiectare ecologică pentru unitățile simple de conversie semnal
Regulamentul (UE) nr. 1194/2012 al Comisiei din 12 decembrie 2012 de punere în aplicare a Directivei 2009/125/CE a Parlamentului European și a Consiliului în ceea ce privește cerințele de proiectare ecologică pentru lămpile direcționale, lămpile cu diode electroluminiscente și echipamentele aferente
Regulamentul (CE) nr. 1275/2008 al Comisiei din 17 decembrie 2008 de implementare a Directivei 2005/32/CE a Parlamentului European și a Consiliului în ceea ce privește cerințele în materie de ecoproiectare pentru consumul de energie electrică în modul standby și oprit al echipamentelor electrice și electronice de uz casnic și de birou
Regulamentul (CE) nr. 1907/2006 al Parlamentului European și al Consiliului privind înregistrarea, evaluarea, autorizarea și restricționarea substanțelor chimice (REACH)
Directivei 2001/16/CE a Parlamentului European și a Consiliului din 19 martie 2001 privind interoperabilitatea sistemului de transport feroviar convențional transeuropean
Directiva 2003/44/CE a Parlamentului European și a Consiliului din 16 iunie 2003 de modificare a Directivei 94/25/CE privind apropierea actelor cu putere de lege și a actelor administrative ale statelor membre referitoare la ambarcațiunile de agrement
Commission Regulation (EU) No 223/2012 of 14 March 2012 amending Regulation (EC) No 2003/2003 of the European Parliament and of the Council relating to fertilisers for the purposes of adapting Annexes I and IV thereto to technical progress Text with EEA relevance
Directiva 2002/40/CE a Comisiei din 8 mai 2002 de aplicare a Directivei 92/75/CEE a Consiliului cu privire la etichetarea energetică a cuptoarelor electrice de uz casnic
Directiva 2006/42/CE a Parlamentului European și a Consiliului din 17 mai 2006 privind echipamentele tehnice și de modificare a Directivei 95/16/CE (reformare)
Directiva 2007/47/CE a Parlamentului European și a Consiliului din 5 septembrie 2007 de modificare a Directivei 90/385/CEE a Consiliului privind apropierea legislațiilor statelor membre referitoare la dispozitivele medicale active implantabile, a Directivei 93/42/CEE a Consiliului privind dispozitivele medicale și a Directivei 98/8/CE privind comercializarea produselor biodestructive (AIMD amendament)
Directiva 2008/57/CE a Parlamentului European și a Consiliului din 17 iunie 2008 privind interoperabilitatea sistemului feroviar în Comunitate (reformare)
Directiva 2009/105/CE a Parlamentului European și a Consiliului din 16 septembrie 2009 referitoare la recipientele simple sub presiune
Directiva 2009/125/CE a Parlamentului European și a Consiliului din 21 octombrie 2009 de instituire a unui cadru pentru stabilirea cerințelor în materie de proiectare ecologică aplicabile produselor cu impact energetic
Directiva 2009/48/CE a Parlamentului European și a Consiliului din 18 iunie 2009 privind siguranța jucăriilorPesticide
Restricţionarea utilizării anumitor substanţe periculoase în echipamentul electric şi electronicDirectiva referitoare la ambarcațiunile de agrement (RCD)
Compatibilitatea electromagnetică (EMC)
Ascensoare
Iinteroperabilitatea rețelei europene de gestionare a traficului aerian
Directiva 2009/142/CE a Parlamentului European și a Consiliului din 30 noiembrie 2009 privind aparatele consumatoare de combustibili gazoși
Indicarea, prin etichetare și informații standard despre produs, a consumului de energie și de alte resurse al produselor cu impact energetic
Directiva 2014/31/UE a Parlamentului European și a Consiliului din 26 februarie 2014 privind armonizarea legislației statelor membre referitoare la punerea la dispoziție pe piață a aparatelor de cântărit cu funcționare neautomată
Directiva 2014/34/UE a Parlamentului European și a Consiliului din 26 februarie 2014 privind armonizarea legislațiilor statelor membre referitoare la echipamentele și sistemele de protecție destinate utilizării în atmosfere potențial explozive (reformare) (ATEX)
Directiva 2006/95/CE a Parlamentului European și a Consiliului din 12 decembrie 2006 privind armonizarea legislațiilor statelor membre referitoare la echipamentele electrice destinate utilizării în cadrul unor anumite limite de tensiune (versiune codificată) (LVD)
Directiva 2014/68/UE a Parlamentului European și a Consiliului din 15 mai 2014 privind armonizarea legislației statelor membre referitoare la punerea la dispoziție pe piață a echipamentelor sub presiune
Regulamentul (UE) 2015/1095 al Comisiei din 5 mai 2015 de punere în aplicare a Directivei 2009/125/CE a Parlamentului European și a Consiliului în ceea ce privește cerințele în materie de proiectare ecologică aplicabile dulapurilor frigorifice de depozitare profesionale, dulapurilor frigorifice de răcire și congelare rapidă, unităților de condensare și răcitoarelor pentru procese
Regulamentului (UE) 2016/2281 al Comisiei de punere în aplicare a Directivei 2009/125/CE a Parlamentului European și a Consiliului în ceea ce privește cerințele de proiectare ecologică aplicabile produselor pentru încălzirea aerului, produselor pentru răcire, răcitoarelor industriale cu temperaturi înalte și ventiloconvectoarelor
Regulamentul (UE) nr. 206/2012 al Comisiei din 6 martie 2012 de punere în aplicare a Directivei 2009/125/CE a Parlamentului European și a Consiliului în ceea ce privește cerințele în materie de proiectare ecologică pentru aparatele de climatizare și ventilatoarele de confort
Regulamentului (CE) nr. 244/2009 al Comisiei din 18 martie 2009 de implementare a Directivei 2005/32/CE a Parlamentului European și a Consiliului în ceea ce privește cerințele de proiectare ecologică pentru lămpi de uz casnic nondirecționale, modificat prin Regulamentul (CE) nr. 859/2009 al Comisiei din 18 septembrie 2009 în ceea ce privește cerințele de proiectare ecologică referitoare la radiația ultravioletă a lămpilor de uz casnic nondirecționale și a Regulamentului delegat (UE) nr. 874/2012 al Comisiei din 12 iulie 2012 de completare a Directivei 2010/30/UE a Parlamentului European și a Consiliului în ceea ce privește etichetarea energetică a lămpilor electrice și a corpurilor de iluminat, precum și a Regulamentului (UE) nr. 1194/2012 al Comisiei din 12 decembrie 2012 de punere în aplicare a Directivei 2009/125/CE a Parlamentului European și a Consiliului în ceea ce privește cerințele de proiectare ecologică pentru lămpile direcționale, lămpile cu diode electroluminiscente și echipamentele aferente
Regulamentul (CE) nr. 245/2009 al Comisiei din 18 martie 2009 de implementare a Directivei 2005/32/CE a Parlamentului European și a Consiliului în ceea ce privește cerințele de proiectare ecologică aplicabile lămpilor fluorescente fără balast încorporat, lămpilor cu descărcare de intensitate ridicată, precum și balasturilor și corpurilor de iluminat compatibile cu aceste lămpi, și de abrogare a Directivei 2000/55/CE a Parlamentului European și a Consiliului
Regulamentul (CE) nr. 278/2009 al Comisiei din 6 aprilie 2009 de punere în aplicare a Directivei 2005/32/CE a Parlamentului European și a Consiliului în ceea ce privește cerințele în materie de proiectare ecologică pentru puterea absorbită în regim fără sarcină și pentru randamentul mediu în regim activ al surselor externe de alimentare
Regulamentul (UE) nr. 305/2011 al Parlamentului European şi al Consiliului din 9 martie 2011 de stabilire a unor condiţii armonizate pentru comercializarea produselor pentru construcţii şi de abrogare a Directivei 89/106/CEE a Consiliului (CPR)
Regulamentul (UE) nr . 392/2012 al Comisiei din 1 martie 2012 de completare a Directivei 2010/30/UE a Parlamentului European și a Consiliului cu privire la cerințele de etichetare energetică a uscătoarelor de rufe de uz casnic cu tambur
Regulamentul (UE) nr. 547/2012 al Comisiei din 25 iunie 2012 de punere în aplicare a Directivei 2009/125/CE a Parlamentului European și a Consiliului în ceea ce privește cerințele de proiectare ecologică pentru pompele de apă
Regulamentul (UE) nr. 548/2014 al Comisiei din 21 mai 2014 privind punerea în aplicare a Directivei 2009/125/CE a Parlamentului European și a Consiliului în ceea ce privește transformatoarele de putere mici, medii și mari
Regulamentul delegat (UE) nr. 65/2014 al Comisiei din 1 octombrie 2013 de completare a Directivei 2010/30/UE a Parlamentului European și a Consiliului în ceea ce privește etichetarea energetică a cuptoarelor și a hotelor de bucătărie de uz casnic
Cerințele de proiectare ecologică pentru aparatele frigorifice de uz casnic
Echipament individual de protecție (PPE)
Directiva referitoare la Dispozitivele Medicale Active Implantabile (AIMD)
Directiva 93/42/CEE a Consiliului din 14 iunie 1993 privind dispozitivele medicaleEchipament individual de protecție. Amendament 89/686/EEC
Servicii postale
Regulamentul (UE) nr. 66/2014 al Comisiei din 14 ianuarie 2014 de punere în aplicare a Directivei 2009/125/CE a Parlamentului European și a Consiliului în ceea ce privește cerințele de proiectare ecologică aplicabile cuptoarelor, plitelor de gătit și hotelor de bucătărie de uz casnic
Regulamentului (UE) nr. 617/2013 al Comisiei de implementare a Directivei 2009/125/CE a Parlamentului European și a Consiliului în ceea ce privește cerințele de proiectare ecologică aplicabile computerelor și serverelor informatice
Regulamentul (CE) nr. 640/2009 al Comisiei din 22 iulie 2009 de implementare a Directivei 2005/32/CE a Parlamentului European și a Consiliului în ceea ce privește cerințele de proiectare ecologică pentru motoarele electrice
Regulamentul (CE) nr. 641/2009 al Comisiei din 22 iulie 2009 de punere în aplicare a Directivei 2005/32/CE a Parlamentului European și a Consiliului cu privire la cerințele de proiectare ecologică aplicabile pompelor de circulație fără etanșare independente și pompelor de circulație fără etanșare integrate în produse
Regulamentul delegat (UE) nr. 665/2013 al Comisiei din 3 mai 2013 de completare a Directivei 2010/30/UE a Parlamentului European şi a Consiliului în ceea ce priveţte etichetarea energetică a aspiratoarelor
Regulamentul (UE) nr. 666/2013 al Comisiei din 8 iulie 2013 de punere în aplicare a Directivei 2009/125/CE a Parlamentului European și a Consiliului în ceea ce privește cerințele în materie de proiectare ecologică pentru aspiratoare
Regulament (EC) Nr 765/2008 al Parlamentului European și a Consiliului din 9 Julie 2008 de stabilire a cerinţelor pentru acreditare şi supravegherea pieţei referitor la marketing-ul produselor şi abrogând Regulamentul (EEC) Nr 339/93
Regulamentul delegat (UE) nr. 811/2013 al Comisiei din 18 februarie 2013 de completare a Directivei 2010/30/UE a Parlamentului European și a Consiliului în ceea ce privește etichetarea energetică a instalațiilor pentru încălzirea incintelor, a instalațiilor de încălzire cu funcție dublă, a pachetelor de instalație pentru încălzirea incintelor, regulator de temperatură și dispozitiv solar și a pachetelor de instalație de încălzire cu funcție dublă, regulator de temperatură și dispozitiv solar
Regulamentul delegat (UE) nr. 812/2013 al Comisiei din 18 februarie 2013 de completare a Directivei 2010/30/UE a Parlamentului European și a Consiliului în ceea ce privește etichetarea energetică a instalațiilor pentru încălzirea apei, a rezervoarelor pentru apă caldă și a pachetelor de instalație pentru încălzirea apei și dispozitiv solar
Regulamentul (UE) nr. 813/2013 al Comisiei din 2 august 2013 de punere în aplicare a Directivei 2009/125/CE a Parlamentului European și a Consiliului în ceea ce privește cerințele în materie de proiectare ecologică pentru instalațiile pentru încălzirea incintelor și instalațiile de încălzire cu funcție dublă
Regulamentul (UE) nr. 814/2013 al Comisiei din 2 august 2013 de punere în aplicare a Directivei 2009/125/CE a Parlamentului European și a Consiliului în ceea ce privește cerințele în materie de proiectare ecologică pentru instalațiile pentru încălzirea apei și rezervoarele de apă caldă
Directiva 92/42/CEE a Consiliului din 21 mai 1992 privind cerințele de randament pentru cazanele noi de apă caldă cu combustie lichidă sau gazoasă
Directiva 92/75/CEE a Consiliului din 22 septembrie 1992 privind indicarea, prin etichetare și informații standard despre produs, a consumului de energie și de alte resurse la aparatele de uz casnic
Directiva 96/60/CE a Comisiei din 19 septembrie 1996 de punere în aplicare a Directivei 92/75/CEE a Consiliului cu privire la etichetarea energetică a mașinilor combinate de spălat și uscat rufe de uz casnic
Directiva 97/23/CE a Parlamentului European și a Consiliului din 29 mai 1997 de apropiere a legislațiilor statelor membre referitoare la echipamentele sub presiune
Directiva 98/79/CE a Parlamentului European și a Consiliului din 27 octombrie 1998 privind dispozitivele medicale pentru diagnostic in vitro
Regulamentul (UE) nr. 932/2012 al Comisiei din 3 octombrie 2012 de punere în aplicare a Directivei 2009/125/CE a Parlamentului European și a Consiliului cu privire la cerințele de proiectare ecologică aplicabile uscătoarelor de rufe de uz casnic cu tambur