Post on 05-Apr-2018
8/2/2019 Www.msexchange.org Articles Tutorials Exchange Server 2010 High Availability Recovery Uncovering Exchange 2010 Database Availability Groups Dags Part4.
1/30
Articles
Authors Blogs
Exchange Hosting
Free Tools
Hardware Message Boards
Newsletter
Services
Software Tips
White Papers
Site Search Search Site Submit Query
Advanced Search
Home
Articles & Tutorials
Exchange 2010 Articles
Page 1 of 30Uncovering Exchange 2010 Database Availability Groups (DA...
3/16/2012http://www.msexchange.org/articles_tutorials/exchange-server-2...
8/2/2019 Www.msexchange.org Articles Tutorials Exchange Server 2010 High Availability Recovery Uncovering Exchange 2010 Database Availability Groups Dags Part4.
2/30
High Availability & Recovery
Uncovering Exchange 2010 Database
Availability Groups (DAGs) (Part 4)
Advertisement
Over 99% Spam Capture Rate!
Use the #1 Exchange Server anti-spam
solution, which uses two anti-spam
engines to capture over 99% of spam
flooding your server on a daily basis
Download a free trial!What Exchange 2010 Database Availability Groups is all about
and how they may fit into your enterprise. I will also provide
you with step by step instructions on how you deploy DAG in a
lab environment.
Published:Apr 08, 2010
Updated:Dec 15, 2010 Section:High Availability & Recovery Author:Henrik Walther Printable Version
Adjust font size: Rating:4.9/5 - 47 Votes
1
2
3
4 5
Page 2 of 30Uncovering Exchange 2010 Database Availability Groups (DA...
3/16/2012http://www.msexchange.org/articles_tutorials/exchange-server-2...
8/2/2019 Www.msexchange.org Articles Tutorials Exchange Server 2010 High Availability Recovery Uncovering Exchange 2010 Database Availability Groups Dags Part4.
3/30
0 09Like
Page 3 of 30Uncovering Exchange 2010 Database Availability Groups (DA...
3/16/2012http://www.msexchange.org/articles_tutorials/exchange-server-2...
8/2/2019 Www.msexchange.org Articles Tutorials Exchange Server 2010 High Availability Recovery Uncovering Exchange 2010 Database Availability Groups Dags Part4.
4/30
Figure 1: Suspending a Database copy
To do the same via the EMS, you can use the following command:
Suspend-MailboxDatabaseCopy Identity MDB02\E14EX02
In order to resume a database copy using the EMC, you just right-click on it again
and choose Resume Database Copy.
Page 4 of 30Uncovering Exchange 2010 Database Availability Groups (DA...
3/16/2012http://www.msexchange.org/articles_tutorials/exchange-server-2...
8/2/2019 Www.msexchange.org Articles Tutorials Exchange Server 2010 High Availability Recovery Uncovering Exchange 2010 Database Availability Groups Dags Part4.
5/30
Figure 2: Resuming a Database Copy
If you rather want to resume it using the EMS, run the following command:
Resume-MailboxDatabaseCopy Identity MDB02\E14EX02
Moving the Active Database Copy to another DAG
Member (aka Switchover)
When you have a planned outage and need to take a DAG member that holds one ormore active database copies down for maintenance, its considered best practice to
manually move any active database copies (aka performing a switchover) to another
DAG member in the DAG. To move an active database copy to another DAGmember using the EMC is accomplished by right-clicking on the respective
database(s) and selecting Move Active Mailbox Database in the context menu as
shown in Figure 3.
Page 5 of 30Uncovering Exchange 2010 Database Availability Groups (DA...
3/16/2012http://www.msexchange.org/articles_tutorials/exchange-server-2...
8/2/2019 Www.msexchange.org Articles Tutorials Exchange Server 2010 High Availability Recovery Uncovering Exchange 2010 Database Availability Groups Dags Part4.
6/30
Figure 3: Activating a Database Copy
This brings up the Activate a Database Copy wizard (Figure 4).
Figure 4: Activate Database Copy wizard
Here we can see the name of the database and on which DAG member it currently is
mounted. To move the database copy to another DAG member, clickBrowse.
Page 6 of 30Uncovering Exchange 2010 Database Availability Groups (DA...
3/16/2012http://www.msexchange.org/articles_tutorials/exchange-server-2...
8/2/2019 Www.msexchange.org Articles Tutorials Exchange Server 2010 High Availability Recovery Uncovering Exchange 2010 Database Availability Groups Dags Part4.
7/30
Figure 5: Selecting the server holding the database copy to be activated
When you have selected the DAG member on which the databse copy should beactivated, clickOK. Then decide if you want to change the database mount dial
settings on the target mailbox server. As you can see in Figure 6 its set to None(change nothing) by default. If you want to change the current setting (set to Best
Availability by default) instead choose Lossless, Best Effort, or Best Availability.
Figure 6: Automatic database mount dial settings
Heres a description of each of the available database mount dial settings:
Lossless: (when selecting Lossless the database will not mount automatically
until all logs generated on the active database copy has been copied to the
passive database copy) Good Availability: (when selecting Good Availability, the database will mount
automatically as long as you have a copy queue length less than or equal to 6. Ifthe copy queue holds more than 6 log files, the database will not mount)
Best Effort: (with Best Effort the database will mount no matter the copyqueue length. Be careful with this setting as you could loose a lot of mailbox
data!)
Best Availability: (with Best Availbility the database will mount automatically
as long as the copy queue length is less than or equal to 12. If the copy queuelength is more than 12, the database will not be able to mount)
Page 7 of 30Uncovering Exchange 2010 Database Availability Groups (DA...
3/16/2012http://www.msexchange.org/articles_tutorials/exchange-server-2...
8/2/2019 Www.msexchange.org Articles Tutorials Exchange Server 2010 High Availability Recovery Uncovering Exchange 2010 Database Availability Groups Dags Part4.
8/30
Unless theres a specific reason to chose another database mount dial override than
the setting currently configured, leave this option at None. When you are ready to
activate the database copy in the target mailbox server specified, clickMove.
To activiate a database copy using the EMS, we can use the following command:
Move-ActiveMailboxDatabase MDB01 -ActivateOnServer E14EX02 -
MountDialOverride:None
Seeding Database Copies
There may be times where you need to seed a database copy for one reason or theother. This can both be done via the Exchange Management Console (EMC) and the
Exchange Management Shell (EMS). Let us take a look at how to accomplish thisvia the EMC.
If it is not already the case, the first thing we must do is to suspend replication for
the passive database copy we want to seed.
Page 8 of 30Uncovering Exchange 2010 Database Availability Groups (DA...
3/16/2012http://www.msexchange.org/articles_tutorials/exchange-server-2...
8/2/2019 Www.msexchange.org Articles Tutorials Exchange Server 2010 High Availability Recovery Uncovering Exchange 2010 Database Availability Groups Dags Part4.
9/30
Figure 7: Suspending the Database Copy
You will now be presented with a dialog box where you can enter a comment on
why replication for the database copy is being suspended.
Figure 8: Dialog box for optional comment
When suspended, right-click on the database copy once again and select UpdateDatabase Copy.
Page 9 of 30Uncovering Exchange 2010 Database Availability Groups (DA...
3/16/2012http://www.msexchange.org/articles_tutorials/exchange-server-2...
8/2/2019 Www.msexchange.org Articles Tutorials Exchange Server 2010 High Availability Recovery Uncovering Exchange 2010 Database Availability Groups Dags Part4.
10/30
Figure 9: Selecting update Database copy in the context menu
The Update Database Copy wizard will now appear (Figure 10).
Figure 10: Update database copy wizard
As you can see we have several options in this wizard. We have the option ofspecifying the source server that should be used for seeding. This is a really cool
feature since you are no longer limited to seeding from an active database copy as
was the case in with Exchange 2007 LCR/CCR/SCR.
Page 10 of 30Uncovering Exchange 2010 Database Availability Groups (D...
3/16/2012http://www.msexchange.org/articles_tutorials/exchange-server-2...
8/2/2019 Www.msexchange.org Articles Tutorials Exchange Server 2010 High Availability Recovery Uncovering Exchange 2010 Database Availability Groups Dags Part4.
11/30
Figure 11: Selecting source seeding server
We can also choose the behavior when files exist in the target path. In addition, wecan specify whether replication to this database copy should be resumes or whether
it should be leaved suspended.
Lastly, we can select which DAG network should be used to seed the database copy.
Again a great feature, which although it was an option in Exchange 2007 SP1, was
very cumbersome.
Figure 12: Selecting DAG network used for seeding database copy
When you have chosen your settings, click Update in order to seed the database
copy. When the seeding has completed, clickFinish.
Page 11 of 30Uncovering Exchange 2010 Database Availability Groups (D...
3/16/2012http://www.msexchange.org/articles_tutorials/exchange-server-2...
8/2/2019 Www.msexchange.org Articles Tutorials Exchange Server 2010 High Availability Recovery Uncovering Exchange 2010 Database Availability Groups Dags Part4.
12/30
Figure 13: Seeding process completed successfully
If you rather want to use the EMS to seed a database copy, the above could be
accomplished by first suspending replication with:
Suspend-MailboxDatabaseCopy Identity MDB02\E14EX02
Figure 14: Suspending a database copy via the Exchange Management Shell
Then run the following command to re-seed the database copy:
Update-MailboxDatabaseCopy -Identity MDB02\E14EX02
Page 12 of 30Uncovering Exchange 2010 Database Availability Groups (D...
3/16/2012http://www.msexchange.org/articles_tutorials/exchange-server-2...
8/2/2019 Www.msexchange.org Articles Tutorials Exchange Server 2010 High Availability Recovery Uncovering Exchange 2010 Database Availability Groups Dags Part4.
13/30
Figure 15: Seeding a database copy via the Exchange Management Shell
Changing the Log file Replication Port
In Exchange 2007, the Microsoft Exchange Replication Service copies log files to
the passive database copy (LCR), passive cluster node (CCR) or SCR target over
Server Message Block (SMB). With DAGs in Exchange 2010, the asynchronousreplication technology no longer relies on SMB. Instead, Exchange 2010 uses
TCP/IP for log file copying and seeding and, even better; it provides the option of
specifying which port you want to use for log file replication. By default, DAG usesTCP port 64327, but you are free to specify whatever port you want to use. To seethe current port used, you must use the Get-AvailabilityGroup cmdlet with the
Status parameter. To see the port used in our lab environment, use:
Get-DatabaseAvailabilityGroup DAG1 Status | fl
Figure 16: Checking Replication port settings for a DAG
To change the port used we must use Exchange Management Shell (EMS) as thisoption isnt included in the Exchange Management Console (EMC). Since this
Page 13 of 30Uncovering Exchange 2010 Database Availability Groups (D...
3/16/2012http://www.msexchange.org/articles_tutorials/exchange-server-2...
8/2/2019 Www.msexchange.org Articles Tutorials Exchange Server 2010 High Availability Recovery Uncovering Exchange 2010 Database Availability Groups Dags Part4.
14/30
setting is configured per DAG, we must use the Set-DatabaseAvailabilityGroupcmdlet.
For instance to change the port for the DAG in our lab to TCP port 7580, we mustuse the following command:
Set-DatabaseAvailabilityGroup DAG1 -ReplicationPort 7580
When the port have been changed, we can verify the new setting using:
Get-DatabaseAvailabilityGroup DAG1 Status | fl ReplicationPort
Figure 17: Checking new Replication port settings for a DAG
Now when updating a database copy, we can see that TCP/7580 is used (below I ran
Netstat an while the database copy were updated.
Figure 18: Checking the new replication port is used (by running Netstat -an)
Page 14 of 30Uncovering Exchange 2010 Database Availability Groups (D...
3/16/2012http://www.msexchange.org/articles_tutorials/exchange-server-2...
8/2/2019 Www.msexchange.org Articles Tutorials Exchange Server 2010 High Availability Recovery Uncovering Exchange 2010 Database Availability Groups Dags Part4.
15/30
Log file Network Compression
With DAGs in Exchange 2010, we can enable or disable compression for seedingand replication activities over one or more networks in a DAG. This is a property of
the DAG itself, not a DAG network. The default setting isInterSubnetOnly (which
means compression is used when replication occur across subnets) as shown inFigure 19.
Figure 19: Checking Network Compression settings for a DAG
The available values are:
Disabled (disabled on all networks)
Enabled (enabled on all networks)
InterSubnetOnly (enabled for inter-subnet communication only) SeedOnly (enabled only for seeding)
If we for instance want to enable network compression for log file copying and
seeding on all networks in a DAG in our lab environment, we would use thefollowing command:
Set-DatabaseAvailabilityGroup DAG1 -NetworkCompression Enabled
Page 15 of 30Uncovering Exchange 2010 Database Availability Groups (D...
3/16/2012http://www.msexchange.org/articles_tutorials/exchange-server-2...
8/2/2019 Www.msexchange.org Articles Tutorials Exchange Server 2010 High Availability Recovery Uncovering Exchange 2010 Database Availability Groups Dags Part4.
16/30
Figure 20: Checking new Network Compression settings for a DAG
With compression enabled for log file seeding and replication, you can expectaround 30% compression ratio. As you can see, theres really no reason why you
should disable network compression unless you for instance use a 3rd party
WAN/network optimizer that doesnt support DAG network compression.
Log file Network Encryption
With DAGs in Exchange 2010 theres now native support for encryption of log file
seeding and replication activities. In Exchange 2007 log files are copied over an
unencrypted channel unless IPsec has been configured. DAG leverages theencryption capabilities of Windows Server 2008/R2, that is DAG uses Kerberos
authentication between each DAG member. Network encryption is a property of the
DAG itself, not the DAG network. Available settings for the network encryption
property are:
Disabled (network encryption not in use),
Enabled (network encryption enabled for seeding and replication on all
networks associated with a DAG), InterSubnetOnly (the default setting meaning network encryption is used
across subnets)
SeedOnly (network encryption in use for seeding on all networks in a DAG).
The default setting is InterSubnetOnly.
Page 16 of 30Uncovering Exchange 2010 Database Availability Groups (D...
3/16/2012http://www.msexchange.org/articles_tutorials/exchange-server-2...
8/2/2019 Www.msexchange.org Articles Tutorials Exchange Server 2010 High Availability Recovery Uncovering Exchange 2010 Database Availability Groups Dags Part4.
17/30
Figure 21: Checking Network Encryption settings for a DAG
If you want to change the network encryption settings, you can use the Set-DatabaseAvailabilityGroupcmdlet. For instance, if you wanted to enable encryption
for log copying and seeding on all networks, you would use the following
command:
Set-DatabaseAvailabilityGroup -identity DAG1 -NetworkEncryption Enabled
Figure 22: Checking new Network Encryptions settings for a DAG
Configuring Replay & Truncation Lag Time
The Standby Continuous Replication (SCR) feature that was introduced with
Exchange 2007 SP1 gave us the option of replicating one or more databases from astand-alone mailbox server, cluster continuous replication (CCR) cluster, or single
copy cluster (SCC) to a target stand-alone mailbox server or standby cluster (CCR
or SCC failover cluster where only the passive clustered mailbox role has beeninstalled). SCR could both be used for replicating storage groups locally in a
datacenter or remotely to servers located in a secondary or backup datacenter.
Page 17 of 30Uncovering Exchange 2010 Database Availability Groups (D...
3/16/2012http://www.msexchange.org/articles_tutorials/exchange-server-2...
8/2/2019 Www.msexchange.org Articles Tutorials Exchange Server 2010 High Availability Recovery Uncovering Exchange 2010 Database Availability Groups Dags Part4.
18/30
In addition to being able to replicate data to multiple targets per storage group, SCRalso introduced the concept of replay lag time and truncation lag time. With replay
lag time you could configure the Microsoft Exchange Replication service to wait for
a specified amount of time before log files that had been copied from the SCR
source to the SCR target(s) were replayed. The default value for replay lag time was
24 hours and could be configured with a value of up to 7 days (if configured to 0seconds there were a 50 log files lag time so that a reseed wasnt require when a
lossy failover has occurred). The idea with replay lag time was to have a database
from back in time, which could be used to recover if active database copy/copies onthe SCR source server(s) were struck by logical corruption. This way to can stop
replication before the logical corruption is replicated to the SCR target server(s) and
thereby prevent loosing data.
Truncation lag time could be used to specify how long the Microsoft Exchange
Replication service should wait before truncating (deleting) the log files that had
been copied to the SCR target server (s) and replayed into the copy of the database(s). The maximum allowable setting for truncation lag time is 7 days and the
minimum is 0 seconds, which will remove the truncation delay completely. With
truncation lag time you could recover from failures that affected the log files on the
SCR source server(s).
DAG also supports replay lag time and truncation lag time we know from SCR in
Exchange 2007 SP1. They work pretty much the same way although controlled via
a new cmdlet (Set-MailboxDatabaseCopy).
These features have been improved a little with Exchange 2010. For instance, the
replay lag time option now has a maximum setting of 14 days instead of 7 days as
was the case with Exchange 2007 SP1. Also bear in mind that unlike SCR inExchange 2007 SP1, replay lag time in Exchange 2010 does not have a hard-coded
replay lag of 50 log files (even when set to 0 seconds).
As you can see in Figure 23 both replay and truncation lag time are disabled by
default.
Page 18 of 30Uncovering Exchange 2010 Database Availability Groups (D...
3/16/2012http://www.msexchange.org/articles_tutorials/exchange-server-2...
8/2/2019 Www.msexchange.org Articles Tutorials Exchange Server 2010 High Availability Recovery Uncovering Exchange 2010 Database Availability Groups Dags Part4.
19/30
Figure 23: Default Replay and Truncation Lag time setting for a Mailbox database
The purpose with replay and truncation lag time in Exchange 2010 is pretty much
the same as with SCR in Exchange 2007 SP1 that is to protect against database
logical corruption and store logical corruption. Whats interesting and new with
Exchange 2010 is you now can use lagged database copies in combination withlegal hold etc.
I wont dive further into lagged database copies in this multi-part article. Instead Illcover this topic in a future articles here on MSExchange.org.
Blocking a Database Copy from being activated
Page 19 of 30Uncovering Exchange 2010 Database Availability Groups (D...
3/16/2012http://www.msexchange.org/articles_tutorials/exchange-server-2...
8/2/2019 Www.msexchange.org Articles Tutorials Exchange Server 2010 High Availability Recovery Uncovering Exchange 2010 Database Availability Groups Dags Part4.
20/30
adver t isement
There are situations where you might want to block a passive database copy (or
even server) in a DAG from being changed activated (changed to the active
database copy). Good thing is the Exchange Product group thought about this kindof scenario. You can do exactly that using a so called activation policy. Its not
possible to use the EMC to set this, but using the EMS, you can use the Suspend-
MailboxDatabaseCopy cmdlet for this purpose. Yes correct, this cmdlet is typically
used for suspending replication for a database copy, but when run with a specialActivationOnly parameter, you can block a database copy from being changed to
the active database copy during a failover. For instance, if we want to block MDB01
on E14EX02 from ever being activated during a failover, we can use the following
command:
Suspend-MailboxDatabaseCopy Identity MDB01\E14EX02 -ActivationOnly
Figure 24: Blocking a database copy from being activated
Notice this does not suspend replication for the database copy and thereby result in,an over time, huge copy queue. Only the database copy is being block from
activation.
Page 20 of 30Uncovering Exchange 2010 Database Availability Groups (D...
3/16/2012http://www.msexchange.org/articles_tutorials/exchange-server-2...
8/2/2019 Www.msexchange.org Articles Tutorials Exchange Server 2010 High Availability Recovery Uncovering Exchange 2010 Database Availability Groups Dags Part4.
21/30
Figure 25: Replication not suspended when using Suspend-MailboxDatabaseCopywith the ActivationOnly parameter
When this cmdlet is run with theActivationOnly parameter, the database copy
cannot be activated until the following command is run:
Resume-MailboxDatabaseCopy Identity MDB01\E14EX02
Figure 26: Unblocking a database copy from being activated
Ok so what if I wish to block all databases on a DAG member server? Will I then
need to run the above command on all database copies on the particular server?Luckily not. We have a similar command that works on the server level. If oyu want
to block a DAG member instead use the Set-MailboxServer with the
DatabaseCopyAutoActivationPolicy Blockedparameter.
For instance if I wanted to block DAG member E14EX02 from having databasecopies activated, I would use the following command:
Set-MailboxServer Identity E14EX02 - DatabaseCopyAutoActivationPolicy
Blocked
Figure 27: Blocking a DAG member from being activated
To allow database copies to be activated again, I would replace Blocked withUnrestricted:
Set-MailboxServer Identity E14EX02 - DatabaseCopyAutoActivationPolicy
Unrestricted
Page 21 of 30Uncovering Exchange 2010 Database Availability Groups (D...
3/16/2012http://www.msexchange.org/articles_tutorials/exchange-server-2...
8/2/2019 Www.msexchange.org Articles Tutorials Exchange Server 2010 High Availability Recovery Uncovering Exchange 2010 Database Availability Groups Dags Part4.
22/30
0 09Like
Facebook social plugin
Add a comment...
Comment using...
Tariq Samsudeen Works at Fortune Promoseven
Very clear. Amazing piece of info.
Reply Like 4 March at 18:51
Page 22 of 30Uncovering Exchange 2010 Database Availability Groups (D...
3/16/2012http://www.msexchange.org/articles_tutorials/exchange-server-2...
8/2/2019 Www.msexchange.org Articles Tutorials Exchange Server 2010 High Availability Recovery Uncovering Exchange 2010 Database Availability Groups Dags Part4.
23/30
Henrik Walther is a respected writer with special focus on Microsoft
Exchange and Office 365/BPOS (Exchange Online) solutions within the unified
communications area. Prior to joining Microsoft, he was an eight year Exchange
MVP and back in 2006 he took the Microsoft Certified Master: Exchangecertification.
Click here for Henrik Walther's section.
Receive all the latest articles by email!
Get all articles delivered directly to your mailbox as and when they are released on
MSExchange.org! Choose between receiving instant updates with the Real-Time
Article Update, or a monthly summary with the Monthly Article Update. Sign up to
the MSExchange.org Monthly Newsletter, written by Exchange Expert HenrikWalther, containing news, the hottest tips, Exchange links of the month and much
more. Subscribe today and don't miss a thing!
Real-Time Article Update (click for sample) Monthly Article Update (click for sample)
Monthly Newsletter (click for sample)
Enter email address
Latest articles by Henrik Walther
Deep dive into rich coexistence between Exchange Forests (Part 1)
Deep dive into rich coexistence between Exchange Forests (Part 2) Deep dive into rich coexistence between Exchange Forests (Part 3)
Deep dive into rich coexistence between Exchange Forests (Part 4)
Deep dive into rich coexistence between Exchange Forests (Part 5)
Page 23 of 30Uncovering Exchange 2010 Database Availability Groups (D...
3/16/2012http://www.msexchange.org/articles_tutorials/exchange-server-2...
8/2/2019 Www.msexchange.org Articles Tutorials Exchange Server 2010 High Availability Recovery Uncovering Exchange 2010 Database Availability Groups Dags Part4.
24/30
Related links
Continuous Backup for Exchange Server with DPM 2007 (Part 2)
Moving from MDaemon to Exchange Server 2003/2007 (Part 1) Moving from MDaemon to Exchange Server 2003/2007 (Part 6)
Recovering an Exchange 2007 Server using the RecoverServer switch
Domain Rename Rename a Windows 2003 Forest with Exchange 2003installed
Featured Links*
Simple Exchange and PST Archiving for SMEsMailStore Server solves 2 of the biggest problems facing those with email
overload: How to reduce workload of email servers, and how to handle PSTfiles.
The New Archiving Debate: Is Exchange 2010 Enough?
Debating Exchange 2010's new archiving features? Experts agree Exchange
falls short for many organizations. Check out Archive Attender for a completesolution!
Fed up of PST files? Archive all Exchange mail to SQL or simply NTFS
Offload Exchange and improve performance, reduce Exchange storagerequirements by up to 80% and allow users to retrieve archived (read-only)emails. Dld free trial.
Dig into your Exchange message tracking files with PROMODAG
StoreLog 3 - FREE
This freeware transfers the content of your message tracking files into anAccess database for easy querying. New version supports Exchange 2010 and
it's FREE!
Gain Visibility into Exchange with Over 200 Reports + Real-Time
MonitoringMailscape lets you manage your entire messaging environment in a sleek, one
look dashboard. Prevent email outages & resolve problems quickly. Test Drive
it Today!
Page 24 of 30Uncovering Exchange 2010 Database Availability Groups (D...
3/16/2012http://www.msexchange.org/articles_tutorials/exchange-server-2...
8/2/2019 Www.msexchange.org Articles Tutorials Exchange Server 2010 High Availability Recovery Uncovering Exchange 2010 Database Availability Groups Dags Part4.
25/30
Receive all the latest articles by email!
Receive Real-Time & Monthly MSExchange.org article updates in your mailbox.
Enter your email below!
Click for Real-Time sample & Monthly sample
Enter Email
Become an MSExchange.org member!
Discuss your Exchange Server issues with thousands of other Exchange experts.
Click here to join!
Community Area
Log in|Register
My Account|Log out
Page 25 of 30Uncovering Exchange 2010 Database Availability Groups (D...
3/16/2012http://www.msexchange.org/articles_tutorials/exchange-server-2...
8/2/2019 Www.msexchange.org Articles Tutorials Exchange Server 2010 High Availability Recovery Uncovering Exchange 2010 Database Availability Groups Dags Part4.
26/30
Featured freeware!
Get a free copy of the new SolarWinds Permissions Analyzer!
Anti Spam Section
Articles & Tutorials
Exchange 2010 Articles
Exchange 2007 Articles
Page 26 of 30Uncovering Exchange 2010 Database Availability Groups (D...
3/16/2012http://www.msexchange.org/articles_tutorials/exchange-server-2...
8/2/2019 Www.msexchange.org Articles Tutorials Exchange Server 2010 High Availability Recovery Uncovering Exchange 2010 Database Availability Groups Dags Part4.
27/30
Exchange 2003 Articles
Exchange 2000 Articles
Exchange 5.5 Articles
Office 365
Product Reviews
Authors J. Peter Bruzzese
Andy Grogan
Nuno Mota
Henrik Walther
Neil Hobson
Anderson Patricio
Jaap Wesselius
Markus Klein
Rui Silva
Ilse Van Criekinge
Blogs
Exchange Hosting
Hardware
Mail Archiving
Message Boards Migration Section
Services
Anti Spam Filtering
BlackBerry Hosting
Exchange Hosting
Hosted Email Archiving
Software
Administration
Anti Spam
Backup & Recovery
Calendar Tools
Content Checking
CRM Software Disclaimers
Document Management
eDiscovery
Email Anti Virus
Email Archive & Storage
Email Signatures
Page 27 of 30Uncovering Exchange 2010 Database Availability Groups (D...
3/16/2012http://www.msexchange.org/articles_tutorials/exchange-server-2...
8/2/2019 Www.msexchange.org Articles Tutorials Exchange Server 2010 High Availability Recovery Uncovering Exchange 2010 Database Availability Groups Dags Part4.
28/30
Fax Connectors
Free Exchange Tools
List Servers - Mgmt
Log Monitoring
Migration
Misc. Exchange server software Mobility & Wireless
Outlook Addons
OWA Addons
POP3 Downloaders
PST Management
Reporting
Security & Encryption
SMS & Paging
Tips & Tricks
White Papers
Featured Products
Featured Book
Order today Amazon.com
Special Preview: Read Chapter 9 here
Page 28 of 30Uncovering Exchange 2010 Database Availability Groups (D...
3/16/2012http://www.msexchange.org/articles_tutorials/exchange-server-2...
8/2/2019 Www.msexchange.org Articles Tutorials Exchange Server 2010 High Availability Recovery Uncovering Exchange 2010 Database Availability Groups Dags Part4.
29/30
Readers' Choice
Which is your preferred Email Antivirus Solution?
avast! Email Server Security BitDefender Security for Exchange
Command Antivirus SDK
GFI MailSecurity for Exchange/SMTP Hexamail Guard Antivirus
Kaspersky Anti-Virus for MS Exchange Server
Protector Plus for Exchange
Sophos PureMessage for Microsoft Exchange Symantec Mail Security for Microsoft Exchange
Trend Micro ScanMail
XWall for Microsoft Exchange
Other p l e a s e s p e c i f y
V o t e !
TechGenix Sites
ISAserver.org
The No.1 Forefront TMG / UAG and ISA Server resource site.WindowSecurity.com
Network Security & Information Security resource for IT administrators.WindowsNetworking.com
Windows Server 2008 / 2003 & Windows 7 networking resource site.
MSPAnswers.com
Resource site for Managed Service Providers.WServerNews.com
The largest Windows Server focused newsletter worldwide.
VirtualizationAdmin.com
The essential Virtualization resource site for administrators.
Anti Spam
Articles
Authors Blogs
Books
Page 29 of 30Uncovering Exchange 2010 Database Availability Groups (D...
3/16/2012http://www.msexchange.org/articles_tutorials/exchange-server-2...
8/2/2019 Www.msexchange.org Articles Tutorials Exchange Server 2010 High Availability Recovery Uncovering Exchange 2010 Database Availability Groups Dags Part4.
30/30
Free Tools Hardware
Hosted Exchange
Links
Message Boards
Newsletter
Services Software
Tips
White Papers
About Us : Email us : Product Submission Form : Advertising Information
MSExchange.org is in no way affiliated with Microsoft Corp. *Links are sponsored
by advertisers.
Copyright 2012 TechGenix Ltd.All rights reserved. Please read ourPrivacy
Policy andTerms & Conditions.
Page 30 of 30Uncovering Exchange 2010 Database Availability Groups (D...