Post on 24-Dec-2015
Working with Acrylic Quiz
Garden Furniture
Baths
Cooking Pots
1. Sheet Acrylic is often used to make?…
Kitchen Worktops
Tea Cups
Fire Surrounds
Thermoplastic Thermosetting plasticElastomer
2. Acrylic is classed as a ?....
3. The purpose of the protective film is to…..
To give you a surface to draw on
To prevent the Acrylic getting scratched
To make the sheet easier to cut
To stop the sheets sticking together
4. Which of the following tools is not suitable for cutting Acrylic?
A Panel Saw
A Coping Saw A Piercing saw
A Jnr Hacksaw
5. The method of filing shown below is called ….
Smooth Filing
Cross Filing
Draw Filing
6. The abrasive used to produce a fine finish on acrylic sheet is called ….
Aluminium Oxide Paper
Wet & Dry
Sand Paper
Glass Paper
Emery Cloth
Vacuum Forming Machine
Strip Heater
Oven
Line Bender
7. What is the correct name for the machine shown below?
Injection Moulding Machine
8. When should you remove the protective film?
Leave it on as long as possible
As soon as possible
Never
Any time you want
Vacuum Forming Machine
Strip HeaterOven
9. What is the correct name for the machine shown below?
Injection Moulding Machine
The acrylic was not hot enoughwhen it was bent
The acrylic was over heated while it was being bent
The acrylic was heated on both sides
10. What is the most likely cause of the small bubbles that have formed along the bend line?
The acrylic was bent too quickly
PVA
Tensol Cement
11. What is the correct name for the adhesive used to glue acrylic to acrylic?
Epoxy Resin
Cascamite
Impact Adhesive
Cyanoacrylate
Vacuum Forming Machine
Strip Heater
Oven
Line Bender
12. Which machine would have been used to shape the acrylic sheet into this sink?
Injection Moulding Machine
Well Done
Quiz Completed
Wrong
Click here to try again