Post on 12-Mar-2020
with
SYSTEM
Piston Type Compressor (1970s)
Water- Cooled Piston Compressor (1970s)
Panoramic View of Hanshin Machinery Mfg. Co., Ltd. In 1969
Oil-Free Screw Compressor (1980s)
Oil-Injected Screw Compressor (1980s)
Sept. 1969 Hanshin Machinery Mfg. Co., Ltd. was established.Nov. 1976 Converted to a corporation, and renamed Hanshin Machinery Co., Ltd.Feb. 1977 Hanshin products were presented at the world fair held in Toronto, CanadaJun. 1979 Started to produce water cooled type air compressors in technological partnership with Meiji Air Compressor Mfg. Co., Ltd. of JapanFeb. 1980 Started to produce vane type air compressors in technological partnership with Hydrovane Co., Ltd. of U.K.Oct. 1983 Started to produce screw compressors in technological partnership with Kobe Steel Ltd. of Japan Oct. 1985 Started to produce Korea’s first oil-free screw compressorsDec. 1985 Started to export products to the U.S. after passing import inspections by the U.S. government Mar. 1986 Started to export air compressors to China by way of Hong KongNov. 1986 Selected as an outstanding domestic machinery development company and received an award from the Minister of
Trade and IndustryJul. 1987 Company went public and offered IPOJan. 1990 Started to produce oil-free piston air compressors in technological partnership with Meiji Air Compressor Mfg. Co., Ltd. of JapanOct. 1991 Expanded the 2nd manufacturing complexNov. 1992 Designated as a Quality control factory and acquired the “ ”markDec. 1992 Passed the product design and performance requirements under the Industrial Safety and Health Act. Jan. 1993 Localized refrigerant type air dryerOct. 1994 Selected as the “Worldwide Sales Leader” by Nov. 1997 Acquired the ISO 9001 certificateFeb. 1999 Supplied the first localized compressors for the nuclear power plants
(Youngkwang 5th and 6th neclear power plants) (Model: AL- 320H)Sept. 2001 Hanshin Machinery made inroads in the Chinese marketJul. 2003 Acquired the certificate of Outstanding After-Sales Service Corporation from the Ministry of Commerce, Industry and EnergyDec. 2005 Factory in China completed construction (Jiaozhou, Shandong province)Jun. 2006 Acquired the certificate of Excellent Service Quality from the Ministry of Commerce, Industry and Energy, the first in the
compressor industry
Ansan Factory, Korea Jiaozhou Factory, China
HANSHIN COMPRESSORS 03
Since its founding in 1969 under the name of Hanshin Machinery Mfg. Co., Ltd., Hanshin has led theKorean air compressor industry by marking many “first domestically made products in Korea,” beginningwith piston-type compressor in the 1970s, to the vane and screw compressors in the 1980s, and the oil-free screw compressor in 1983. Hanshin went public in 1987, and in 1999, the company became the firstto domestically produce compressors for nuclear power plants. In 2001, Hanshin once again made itsmark with the first Korean-run factory in China that specializes in manufacturing air compressors.
There have been many air compressor manufacturers in Korea that opened their doors and then closed,but Hanshin has grown steadily until the company is considered as the representative of compressors inthe Korean market. You can be assured that Hanshin will remain ‘a leader in the air compressor field,’striving to satisfy customer demands, and meeting their high expectations.
The History of Hanshin is the History of the Air Compressors in Korea
THE HISTORY
GRH3- 30ASpecifications & Dimensions 12 page
Air Cleaner Suction Valve Cooling Fan Minimum Pressure Valve
HANSHIN COMPRESSORS 05
GRH3- 30A
GRH3- 50A
(Standard : Built-in type)
GRH3- 100AC
Oil / After Cooler Oil Filter And Thermostatic Valve
V Belt / Direct Drive Oil (NXL- 3000)
Hanshin’s GRH series is the model that sold more than 2,000 units a year. Since its launch in1997, the model has sold over 10,000 units. It broke the record of biggest selling single modelin the Korean industry, and is unquestionably “Korea’s top air compressor” in terms of quantitysold.
Hanshin compressors, with the pride of “The power behind the world industries”, are currentlybeing operated in all sizes of industrial fields from large production lines to smallneighborhood factories where products with ‘made in Korea’ labels are manufactured.
“The Power behind the World Industires !” - The leader in sales, in the history of Korean air compressors!
THE BRAND
STS Semiconductor & Telecommunication Lotte Samkang Co., Ltd.
HANSHIN COMPRESSORS 07
Certificate of Excellent Service Quality
ISO 9001 certificate Mark of a listed enterprise Hanshin’s unique TM of nationwide after-sales service
Certified Excellent Service Quality (ESQ)
System
There has been, and still are, many companies that claim their products excel ours in terms ofperformance and cost, and that compressors are simply hardware. But Hanshin believes thatwhen our customers make a purchase, they are paying not just for a piece of steel called an aircompressor, but also for our corporate culture. We realize that there are many consumers whoencounter problems when trying to find replacement parts because the product came from oneof many air compressor manufacturers that are no longer in business.
But Hanshin is Korea’s first listed and only one air compressor manufacturer, a well-establishedcorporation with a business record of 40 years. Hanshin takes the social responsibility of acorporation seriously, and is clearly distinguishable from the many companies that entered themarket only to perish in short time while chasing short-term profits.
When you purchase our products, you may count on our corporate culture, which has made itpossible for Hanshin to grow into the leader in Korea’s air compressor industry.You can rest assured that Hanshin will always be there for you, ready to meet your highestexpectations.
ESQ is a government-sponsored certification system, awarded to only a few companies thathave been selected by the Ministry of Commerce, Industry and Energy after a strict evaluationprocess. Hanshin is the solely ESQ certified company in this field, and one of only 400corporations in the entire industrial fields to have received the ESQ. It is a governmentcertification that embodies a dedication to quality management, comparable to the MalcolmBaldridge Award in the U.S.A.
This is Hanshin’s unique service network system, born out of our commitment to “the deliveryof equipment service within eight hours, and parts within four hours, to customers anywhereinside Korea.” For this system, we have networked 53 Air Care Centers (ACC, the name of theHanshin’s own service center) that cover every corner of the country like capillary vessels, and13 distribution centers. This network system will put an end to customer service that “neveranswers the customer’s call.”
Count On Our Corporate CultureTHE CULTURE
Minimal Power Consumption
- Reduces power consumption through its motor rpm control function that corresponds to air consumption
- Added savings in power consumption by turning to no- load operation mode when air consumption drops to less than 30%.
Optimum Air Flow Control
- Maximum amount of discharge is realized by automatically switching to the most efficient operation rpm of the motor within the range of operation pressure
Air Consumption vs. Power Consumption The most efficient operation frequency and thedischarge amount for different ranges of pressure
is the name of Hanshin’s graphic LCD MICOM control model, which displays operation status on the graphic monitor in an easy-to-read format. Since the brightness of the LCD screen automatically adjusts to thetemperature of the surrounding environment, you can see the status on the screen clearly, even in a dark area.
Automatic calculation of the optimum operation rpm of the motorThe motor operation rpm is automatically adjusted when you change the pressure, so that it can offer the bestenergy savings and maximum benefits.
Highly ReliableThe MICOM, which Hanshin developed using only verified control parts and sufficiently reliable tests, canguarantee perfect quality
Easy and simple to useAll you need to do is set the operation pressure.Other data will automatically change to allow for optimumoperation.
Main Screen Secondary Screen Fan Motor Trip Indication ScreenMain Motor Trip Indication Screen Operation Confirm Signal Error,
Trip Indication Screen Discharge Temperature High, Trip IndicationScreen Temperature Sensor Error, Trip Indication Screen PressureSensor Error, Trip Indication Screen Air Filter Replacement IndicationScreen Oil Filter Replacement Indication Screen Oil SeparatorReplacement Indication Screen Internal Pressure Rise Automatic StartSystem Idle Screen Line Pressure Rise Automatic Start System IdleScreen Unload Operation Screen Automatic Blue(Stop) Screen Schedule Operation Selection Screen Stop Delay Operation Screen
Discharge High Temperature, Alarm Indication Screen ScheduleOperation Screen Manual Non-Load Operation Screen Low CoolWater Volume, Trip Indication Screen Internal Pressure Drop, AlarmIndication Screen Oil Temperature High, Trip Indication Screen
Data Setting Error, Trip Indication Screen
This is Hanshin’s own inverter model that has the adaptability of a Chameleon. Built with artificialintelligent MICOM, this artificial intelligence model offers outstanding savings in power consumptionwith the most efficient rpm control.
- Maximum Efficiency, RealizedThrough Superior Control Solution
- Graphic LCD
24 Categories to Check Operation Status
Local Office
Server
Office
HomeInternet
Hub
HANSHIN COMPRESSORS 09
SYSTEM allows for the stop control and the remote operation and remote monitoring of theoperation status of a compressor through a dedicated communication line or LAN. Using the Internet, you canconveniently manage the compressor anytime, anywhere in the world, by using its stop control and the remoteoperation and remote monitoring of operation status in compressor functions.
- Compressor Status Monitoring System
The Controller and system that are installed in our new GRH3 series(standard for 75/100HP, optional for 20~50HP) are two of Hanshin’s recent products thatmarked a new chapter in our History. There are only a couple of corporations in the entireworld that have succeeded in developing these two systems, and Hanshin is the first in Korea.
With this globally accessible system, you can check dozens of operation status categoriesanytime, anywhere in the world, by logging onto the operation status of compressors that run24 hours a day in your customers’ factories, at the same time you can check the basic inverteroperation by using the internet. This is a system that allows you to remotely operate and stopequipment over the web.
Since this revolutionary new system is compatible with Hanshin’s main COSMOS system, youcan make inquiries about operating your compressor, request a diagnosis of problems, andcarry out all trouble shooting through this system.
The History ContinuesTHE TRADITION
Specifications & Dimensions 13 page
GRH2-200A (150A)
GRH2-200AC (150AC)
GRH2-300A (250A)
AC220V
VCTF 1.25SQ 10C( 4)
Compressor 1 Compressor 2 Compressor 3 Compressor 4
AWG20 3CSHIELD CABLE
Pressure Sensor
Operation Graph Operation Method
Group Control System
Control Flow Chart
HANSHIN COMPRESSORS 11
Air Filtering System for Different Purposes
Description
Item Main Filter Refrigerant Air Dryer Pre Filter Line Filter Coalescer Filter Desiccant Air Dryer Adsorbent Filter
SYSTEM 1
SYSTEM 2
SYSTEM 3
SYSTEM 4
Extra Dry, Odorless AirNon Freezing Line
Oil-Free, DryOdorless, Clean Air
Oil-Free, DryClean Air
Dry, Clean Air
Extra dry systems (electronic parts)Chemical analysis systems (gas, gas recharging tank)Equipment used in cold climates (powder, storage, transport), coating
Medical and Food industry (transport, mix, dry, pack)Breathing Aids
Measuring Instruments, electrostatic paintingPrecision machinery, Precision parts drying
Pneumatic machinery and tools,general drying
Features of Compressed Air Dryer
Demerits
Description
MeritsBestefficiency(over 99%)
Little Pressure Loss Collision Type<25mmAq Centrifugal type<76mmAqLow risk of pollution
Eliminatesrather largewater drops
Cools the airDecreased moisture volume Dew point of 16~ 38℃
High Energy EfficiencyDew Point of 2~13℃
Decreases the water vapor elementsDew Point of 10~15℃
The highest moisture elimination capacityDew point less than -40℃
Simple structureDew Point of4~ 27℃
Coalescing Filter
SeperatorReceiver
TankDesiccant
TypeChiller Type
Refrigerant Type
Heat Exchanger
Deliquecent Type
Big pressureloss, over762mmAq
Low efficiency,Collision type>90%centrifugal type 98%
Lowefficiency,bulky
High dewpoint
Dew point ofless than 0℃not possible
Separate heattransferadditional route
High initialcost
High OutputDew PointGeneratescorrosive drain
Application
Momentum Transfer Heat Transfer Mass Transfer
Eliminate water aerosolIncapable of eliminating water vapor.
Eliminate water vaporPoor ability for eliminating water aerosol
Eliminate water vaporPoor ability for eliminating water aerosol
When the air from the atmosphere is drawn in and pressurized by the compressor, various impuritiesand pollutant particles that are generated by the compressor can diminish the performance anddurability of various pneumatic components of the compressor and the production line, resulting innegative effects on productivity and quality. Therefore, special consideration of the pollution issue inpneumatic systems is required, and a proper Air Filtering System that supports performance and specialfeatures of the pneumatic components has to be selected, before comprehensively reviewing theeconomic efficiency, reliability, stability and maintenance of the product
Green Compressed Air Systems
Specifications & Dimensions
� Star- Delta Type
MODEL
Type
Control System
Main Motor Output (kW)
Cooling Fan Motor Output (kW)
Voltage (V)
Frequency (Hz)
Drive System
Starting Method
7.0 bar
8.5 bar
9.9 bar
Intake Air Pressure Temperature (℃)
Discharge Air Temperature (℃)
Discharge Pipe Diameter (inch)
Lubricating Oil Capacity ( )
Noise Level dB (A) 1.5m From Front Side
Length (mm)
Width (mm)
Height (mm)
Weight (kg)
Single Stage Oil-Injected Screw Air Compressor
AC 220 / AC 380 / AC 440 3 Phase
50 / 60
Atmospheric Pressure 0~ 40
Atmospheric Temperature + 15 or Less
Poly Belt Drive Direct Drive
Star- Delta Starter
Analog Controller (Inspectrol Option) Inspectrol (Inpectrol)
1 (25A)
15
1000
1400
1350
2 (50A)
50
2000
1350
1700
Air DischargeVolume (m3/min)
Dimensions& Weight
GRH3- 20A
15
Direct
2.4
2.2
2.0
66
673
GRH3- 25A
18
3.0
2.7
2.4
67
700
GRH3- 30A
22
3.6
3.3
3.0
68
726
GRH3- 35A
27
4.3
4.0
3.7
69
753
GRH3- 50A
37
1.6
6.7
5.8
5.3
1 (40A)
25
70
1100
1600
1500
940
GRH3- 75A
55
10.3
9.1
8.3
72
1596
GRH3- 100A
75
13.6
12.0
10.7
73
1713
1.1 3.2 (1.6×2)
MODEL
Type
Control System
Main Motor Output (kW)
Cooling Fan Motor Output (kW)
Voltage (V)
Frequency (Hz)
Drive System
Variable Frequency (Hz)
Variable Capacity (m3/min)
Pressure Band Within (bar)
Starting Method
7.0 bar
8.5 bar
9.9 bar
Intake Air Pressure Temperature (℃)
Discharge Air Temperature (℃)
Discharge Pipe Diameter (inch)
Lubricating Oil Capacity ( )
Noise Level dB (A) 1.5m From Front Side
Length (mm)
Width (mm)
Height (mm)
Weight (kg)
Air DischargeVolume (m3/min)
Dimensions& Weight
GRH3- 20AC
15
2.4
2.2
2.0
66
698
GRH3- 25AC
18
3.0
2.7
2.4
67
731
GRH3- 30AC
22
3.6
3.3
3.0
68
758
GRH3- 35AC
27
50 / 60
20~ 63
30~ 100
± 0.1 bar
Inverter
4.3
4.0
3.7
68
826
GRH3- 50AC
37
1.6
6.7
5.8
5.3
1 (40A)
25
70
1100
1600
1500
1060
GRH3- 75AC
55
10.3
9.1
8.3
72
1798
GRH3- 100AC
75
13.6
12.0
10.7
73
1900
� Inverter Type /
Single Stage Oil-Injected Screw Air Compressor
Inspectrol (Micom)
AC 220 / AC 380 / AC 440 3 Phase
Atmospheric Pressure 0~ 40
Atmospheric Temperature + 15 or Less
Poly Belt Drive Direct Drive
3.2 (1.6×2)1.1
2 (50A)
50
2000
1350
1700
1 (25A)
15
1000
1400
1350
HANSHIN COMPRESSORS 13
Specifications & Dimensions
� Air Cooled
AIR COOLED MODEL
Type
Output (kW)
Voltage (V)
Frequency (Hz)
Drive System
Starting Method
7.0 bar
8.5 bar
9.9 bar
Intake Air Pressure Temperature (℃)
Discharge Air Temperature (℃)
Discharge Pipe Diameter (inch)
Lubricating Oil Capacity ( )
Length (mm)
Width (mm)
Height (mm)
Weight (kg)
Volume (m3/Hr)
Supplying Pressure
Inlet & Outlet Size (inch)
Air DischargeVolume (m3/min)
Dimensions& Weight
� Water Cooled
Cooling Water
GRH2- 125W
90
17.8
16.3
15.6
2800
10.5
GRH2- 150W
110
20.8
19.1
16.1
2
140
2700
1700
2000
3000
12.5
2
GRH2- 200W
150
28.0
25.8
23.8
4000
17.0
GRH2- 250W
190
35.2
32.5
30.1
4300
20.8
GRH2- 300W
220
42.0
35.2
33.8
4500
23.8
GRH- 350W
260
50.8
47.1
43.5
4
5500
30.0
GRH- 400W
300
55.0
50.5
46.9
360
4500
2200
2000
6500
33.6
3
GRH- 500W
375
70.0
65.2
59.6
7500
42.7
Single Stage Oil-Injected Screw Air Compressor
50 / 60
Direct Drive
Atmospheric Pressure 0~ 40
Atmospheric Temperature + 15 or less
3
185
3100
2200
2100
2~ 5 kfg/cm2
2
5
AC 220 / AC 380 / AC 440 / AC 3300 / AC 6600 AC 3300 / AC 6600
Star-Delta, Reactor Reactor
AIR COOLED MODEL
Type
Output (kW)
Voltage (V)
Frequency (Hz)
Drive System
Starting Method
7.0 bar
8.5 bar
9.9 bar
Intake Air Pressure Temperature (℃)
Discharge Air Temperature (℃)
Discharge Pipe Diameter (inch)
Lubricating Oil Capacity ( )
Length (mm)
Width (mm)
Height (mm)
Weight (kg)
Air DischargeVolume (m3/min)
Dimensions& Weight
GRH2- 125A
90
17.8
16.3
15.6
3000
GRH2- 150A
110
20.8
19.1
16.1
120
2700
1700
2000
3200
GRH2- 200A
150
28.0
25.8
23.8
4200
GRH2- 250A
190
35.2
32.5
30.1
4500
GRH2- 300A
220
42.0
35.2
33.8
4700
Single Stage Oil-Injected Screw Air Compressor
AC 220 / AC 380 / AC 440 / AC 3300 / AC 6600
50 / 60
Direct Drive
Star - Delta, Reactor
Atmospheric Pressure 0~ 40
Atmospheric Temperature + 15 or Less
2 3
200
3100
2200
2000
Air DryerDesigned to be ideal for use in any environment, with its built-in, high-performance refrigerant compressor “Tecumseh”
After CoolerDecreases the load that affects the dryer, and help the dryer to work at its optimal level.
Specifications & Dimensions
XD- 5XD- 7XD- 10XD- 15XD- 20XD- 30XD- 35XD- 50XD- 75XD- 100XD- 130 (W)
XD- 150 (W)
XD- 170 (W)
XD- 200 (W)
XD- 250 (W)
XD- 300 (W)
XD- 400 (W)
XD- 500 (W)
XD- 600 (W)
XD- 750WXD- 900WXD- 1200W
Inlet &Outlet Size
mm15A15A25A25A25A25A25A40A50A50A65A65A65A80A80A100A100A150A150A200A200A200A
Range of applied air compressor
HP1~ 55~ 7
7~ 1010~ 1515~ 2020~ 3030~ 3535~ 5050~ 7575~ 100100~ 130130~ 150150~ 170170~ 200200~ 250250~ 300300~ 400400~ 500500~ 600600~ 750750~ 900
900~ 1200
Processingcapacity
Nm3/min0.510.791.001.532.603.904.706.70
10.5014.20
18.00 (19.50)
21.00 (22.50)
24.00 (25.70)
30.00 (32.10)
39.00 (41.70)
47.00 (50.30)
56.00 (59.90)
66.00 (70.60)
85.00 (91.00)
120.00140.00180.00
Compressor
HP1/41/41/33/83/83/43/41
1 2334455
101616203030
Voltage
A1.71.72.63.23.66.26.28.111.38.5
17.8 (16.8)
17.8 (16.8)
19.6 (19.6)
19.6 (19.6)
21.4 (21.4)
21.4 (21.4)
31.2 (28.4)
46.2 (43.7)
46.2 (43.7)
71.4102.0102.0
Wattage
kW0.460.460.620.680.721.301.301.602.102.303.00
3.00 (3.40)
4.605.108.508.50
10.00 (9.60)
16.0016.0016.3024.6024.60
Powersource
V- PH- Hz
220/ 380/440V1PH
50/ 60Hz
220/ 380/440V3PH
50/ 60Hz
Length270270270300300350350400400400115011501200120013501350
1150 (1600)
1150 (1600)
1150 (1600)
180018002000
Width630630630630630700700800880950620620700700770770
1900 (1150)
1900 (1150)
1900 (1150)
140014001400
Height540540540600600680680800800900120012001270127013601360170017001700175017501800
Weight33333547477272
103137140
180 (170)
200350 (320)
490 (350)
500 (450)
860 (550)
910 (650)
940 (780)
1100 (780)
95010101300
Dimension mm, kgCategories
Model
1. When a different electrical spec is required, we can customize the product on request. 2. Processing capacity is based on 60Hz.
HAC- 20AHAC- 25AHAC- 40AHAC- 50AHAC- 80AHAC- 100AHAC- 150AHAC- 200AHAC- 300AHAC- 400AHAC- 500AHAC- 600A
Inlet &Outlet Size
mm20A25A40A50A50A65A80A
100A100A125A150A150A
Range of applied air compressor
HP1~ 2020~ 2525~ 5040~ 5050~ 8080~ 100100~ 150150~ 200200~ 300300~ 400400~ 500500~ 600
Processingcapacity
Nm3/min1.03.25.17.812.717.528.041.052.065.075.095.0
Fan Size
mm250 × 1350 × 1450 × 1500 × 1450 × 1400 × 2450 × 2500 × 2550 × 2450 × 4500 × 4550 × 4
Fan Size
mm250 × 1350 × 1450 × 1500 × 1450 × 1400 × 2450 × 2500 × 2550 × 2450 × 4500 × 4550 × 4
Voltage
A0.250.420.701.200.701.001.402.402.402.804.804.80
Length27527536036010201470165017401840179019352035
Width460590780880345345395395355350350350
Height470600665740787825109212451360161316901840
Weight162448586595
180210230300350370
Dimension mm, kg
Model
HAC- 100WHAC- 200WHAC- 300WHAC- 400WHAC- 500WHAC- 600W
ProcessingcapacityNm3/min
183036426089
Amount of cooling water
/min55105155210270320
HeatingSurface
m3
2.13.25.15.96.3
11.7
Categories
Model A128014501780190020002100
B108012301580170017501850
C155155168180180210
D400400400460460520
E5B5B6B8B8B10B
F8B8B8B
10B10B12B
G400400400470470500
H220220220250250300
N1∙N22B3B4B4B6B8B
N3∙N41B
1 B1 B2B
2 B3B
N51/2B1/2B1/2B3/4B3/4B3/4B
Weight112121163233253410
Dimension mm, kg
1. R- 404A, an alternative refrigerant for R- 22, can be customized to order2. When a different electrical spec is required, we can customize the product to order3. Processing capacity is based on 60Hz.4. When the pressure needs to be over 9.9 kgf/cm2 , we can customize the product to order.
5. The temperature of cooling water is basically 32℃ Please contact us if you need to work with a higher temperature.
6. We can custom make compressors larger than those listed above on request.7. W is a water cooled type
Categories
HANSHIN COMPRESSORS 15
Air FilterProvides clear and dry pressurized air in order to prevent breakdown and errors in the pneumatic components
Air Receiver TankIncreases instantaneous action of the compressed air
Specifications & Dimensions
Model Volume(M3)
A(B.C.D) B C D(LD) H Weight
(Kg) RemarksNozzle size
HART- 05
HART- 10
HART- 15
HART- 20
HART- 30
HART- 40
HART- 50
HART- 60
HART- 80
HART- 100
0.5
1.0
1.5
2.0
3.0
4.0
5.0
6.0
8.0
10.0
730
800
900
1000
1150
1240
1360
1360
1610
1610
583
600
700
740
823
1100
1100
1100
1450
1450
1127
1500
1970
2020
1867
2770
2730
3290
3470
4295
760
920
960
1100
1340
1340
1500
1500
1750
1750
1524
1886
2466
2544
2550
3517
3518
4078
4373
5198
271
520
600
900
1200
1678
1975
2452
3218
3752
Hand Hole100AKS 10K SOFF
Man Hole(Internal Type)
N1
40A
40A
50A
50A
65A
65A
80A
100A
100A
125A
N2
40A
40A
50A
50A
65A
65A
80A
100A
100A
125A
N3
25A
40A
N4
10A
N5
25A
N6
25A
7
(Manhole)
100A
330 ×470
Note) Maximum Flow Rate is the filtered air flow rate written in Nm3/min unit, based on pressure of 0.3kgf/cm2 and the lines of 0.1 and 0.01 for main and pre filters, and for the coalescent and carbon filters, the pressure of 0.2 ~ 0.4kgf/cm2, and primary peak pressure of 7kgf/cm2.* We can customize a unit for equipment using a higher number than Filter 200A on request.
XC- 15A
XC- 20A
XC- 25A
XC- 40A
XC- 50A
XC- 65A
XC- 80A
XC- 100A
XC- 125A
XC- 150A
XC- 200A
XC- 250A
XC- 300A
XC- 15H
XC- 20H
XC- 25H
XC- 40H
XC- 50H
DimensionCategories
Model Nm3/min2.2
5.7
8.0
17.0
29.0
58.0
88.0
139.0
162.0
282.0
447.0
733.0
1103.0
2.2
5.7
8.0
17.0
29.0
SCFM76
194
277
588
1003
2007
3045
4810
5605
9758
15467
25363
38166
76
194
277
588
1003
Nm3/min1.8
3.5
5.7
14.0
25.0
49.0
73.0
120.0
145.0
221.0
331.0
555.0
850.0
1.8
3.5
5.7
14.0
25.0
SCFM62
121
197
484
865
1696
2526
4651
5017
7647
11453
19204
29412
62
121
197
484
865
Nm3/min1.2
2.8
5.0
11.0
22.0
48.0
72.0
110.0
132.0
176.0
308.0
528.0
792.0
1.2
2.8
5.0
11.0
22.0
SCFM42
97
173
381
761
1161
2491
3806
4567
6090
10657
18270
27405
42
97
173
381
761
Nm3/min1.0
1.9
3.4
10.0
14.0
28.0
42.0
70.0
84.0
112.0
196.0
330.0
504.0
1.0
1.9
3.4
10.0
14.0
SCFM35
66
118
346
484
969
1453
2422
2907
3875
6782
11419
17439
35
66
118
346
484
ea1
1
1
1
1
2
3
5
6
8
11
19
30
1
1
1
1
1
mm15A
20A
25A
40A
50A
65A
80A
100A
125A
150A
200A
250A
300A
15A
20A
25A
40A
50A
mm105
105
105
144
185
550
550
600
700
700
1000
1200
1400
106
106
106
144
185
mm270
310
435
700
925
1105
1105
1125
1195
1195
2367
2745
2745
340
390
510
700
925
kg1.5
1.5
1.9
12.0
21.0
88.0
103.0
120.0
120.0
120.0
120.0
120.0
500.0
17.0
19.0
21.0
25.0
28.0
Inlet &Outlet Size
Number ofElements
Processing Capacity40 5 1 ppm Length Height Weight 0.01ppm/ 0.01ppm/ 99% +
* Specs in this catalogue are subject to changes for performance improvement without advance notice.
THE POWER BEHIND THE WORLD INDUSTIES !