Post on 22-Jan-2018
1
MeetWireless System per lo Small Business
Formazione OnlineAndrea Rossi
Senior System Engineer
andrea.rossi@netgear.com
Orbi Pro AC3000 Tri-band WiFi System
Up and running in minutes, wire-free installation, app management
3 Secure, separate WiFi networks
750 m2. coverage (expandable to 1500 with 2 add’l satellites)
Desktop, wall-mount, ceiling-mount
Ideal for retail, shops, small businesses and offices
O R B I A P PR O U T E R S A T E L L I T E
2
200 Mbps 200 Mbps 433 Mbps 433 Mbps
2.4GHz 400Mbps 5.0GHz 866Mbps
200 Mbps 200 Mbps 433 Mbps 433 Mbps
2.4GHz 400Mbps 5.0GHz 866Mbps
FastLane3 - Tri-band WiFi Enables a Wire-like Backbone
5 . 0 G H Z Q U A D S T R E A M
1 7 3 3 M B P S !
433 Mbps
433 Mbps
433 Mbps
433 Mbps
Dedicated dual-band 2.4 and 5Ghz for clients.
Dedicated quad-stream 1.7Gb AC3000 connection between Orbi Pro Router & Satellite
3
FASTLANE3
Orbi Pro with add-on satellite(s)
4
Orbi ProRouter
Satellite
Satellite
Connect the Orbi Pro Routerto your cable modem or
service provider gateway.
Place the Orbi Pro Satellite(s)* in the areas where WiFi coverage is needed.
Easily connects to existing service provider box
* Each router supports up to 3 satellites
Orbi Pro – Network-in-a-box for small businesses
5
The router and satellite have 7 Gigabit ports together that can be considered as a switch thanks to a dedicated wireless backhaul.
4 of these ports are on the satellite and can be placed anywhere to support business needs.
When all 3 satellites of Orbi Pro are in use, the system has a total of 15 gigabit switch ports
Wired or Wireless, Orbi Pro has your business covered!
What is new with Orbi Pro?
O R B I D E S K T O P F E A T U R E S
• AC3000, 5,000 sq ft coverage (Router & Satellite kit)
• Tri-band with Dedicated Backhaul (4x4) + 2*2x2 Front haul
• Up to 10K sq ft coverage (Router + 3 additional Satellites)
• 4 Gigabit Ethernet ports anywhere
F O R B U S I N E S S E S , O R B I P R O A D D S
• New Industrial Design for desktop, wall & ceiling mounting
• Multiple SSID, to support secure separate WiFi networks:
A D M I N I S T R A T I V E T R A F F I C
E M P L O Y E E B Y O D D E V I C E S
G U E S T D E V I C E S
• Captive Portal (guest) requiring Terms & Conditions acceptance before getting time-limited access to Internet
NETGEAR Confidential6
Traffic Separation, 3 Isolated Networks
7
Traffic Separation, 3 Isolated Networks
8
Traffic separation works also in Access Point mode
Traffic Separation, 3 Isolated Networks for BAR/RISTO
9
ACCESSO COMPLETO – COMANDA
OSPITI
ACCESSO INTERNET NO LIMIT
Traffic Separation, 3 Isolated Networks - UFFICIO
10
OSPITI
BYOD
ACCESSO COMPLETO
Admin and Employee Network Setup
11
The 3 networks are listed on the main admin page. By default they are called Wireless 1, Wireless 2 and Guest Portal.
Setting up the Wireless 1 and 2 networks is very straight forward.
Once their icons are clicked, the wireless settings page for that network is displayed where the user can update the details and click apply.
Guest Captive Portal Setup
12
Guest portal setup is almost the same with the addition of the details fro the captive portal. Text and graphics can be added to customize the portal.
Backhaul: No wires!
Guest device
Orbi Pro Router
Orbi Pro Satellite
Admin server Point of Sale
Guest device
Employee BYOD
3 S E P A R A T E N E T W O R K S
Internet Gateway
13
I N T E R N E T
Place near your Internet Gateway 1) Admin Network used only
for private servers; has access to Internet, but not to the other networks;
Place anywhere you need coverage & have power
3) Guest network; no access to Admin network; Captive Portal challenge; temporary sessions
2) Employee network; no access to Admin network; but to Internet.
Orbi Pro comparison chart
14
(Orbi)RBK50
(Orbi Pro) SBK60
Eero Google WiFi
Speeds AC 3000 AC 3000 AC 1200 AC 1200
Coverage (in SQ FT)
5,0002,500 + 2,500
5,0002,500 + 2,500
3,0001,000 x 3
4,500(1,000-1,500) x3
Front Haul Antenna2x2 on 2.4GHz2x2 on 5GHz
2x2 on 2.4GHz2x2 on 5GHz
2x2 (2.4 + 5GHz)Dedicated 5GHz LB
2x2 on 2.4GHz2x2 on 5GHz
Back Haul AntennasFastLane3
4x4 (1.7Gbps)FastLane3
4x4 (1.7Gbps)N/A N/A
LAN / WAN Ports 4 + 4 4 + 4 2 per device 2 per device
USB Ports 1 + 1 0 1 per device None
Mounting kit N/A Wall/CeilingWall mount
(sold separately)Wall mount
(sold separately)
Features comparison with Orbi RBR50/RBS50
15
Feature Orbi Pro kit SBK60 Orbi kit RBK50
AC3000 Router and AC3000 Satellite (1733+866+400Mbps)‡ ✅ ✅
Simultaneous Tri-band WiFi- Radio 1: IEEE® 802.11b/g/n 2.4GHz– 256QAM support - Radio 2: IEEE® 802.11a/n/ac 5GHz– 256QAM support - - Radio 3: IEEE® 802.11a/n/ac 5GHz– 256QAM support
✅
✅
✅
✅
✅
✅
Memory: 4GB flash and 512MB RAM ✅ ✅
Six high-performance antennas with high-power amplifiers ✅ ✅
Implicit/Explicit Beamforming for 2.4 & 5GHz bands (1733+866+400Mbps)
✅ ✅
MU-MIMO capable for simultaneous data streaming on multiple devices
✅ ✅
Router: Three Gigabit Ethernet LAN ports, 1 Gigabit WAN ✅ ✅
Satellite: Four Gigabit Ethernet ports ✅ ✅
Features comparison with Orbi RBR50/RBS50 -2
16
Feature Orbi Pro kit SBK60 Orbi kit RBK50
USB 2.0 ✅
OpenVPN server ✅ ✅
WPA/WPA2-PSK support ✅ ✅
3 x SSID preconfigured ✅
Dimensions 6.8 x 3.3 x 9.7 in each(172.8 x 83.9 x 246.5
mm) each for router and satellite
6.7 x 3.1 x 8.89 inch(170.3 x 78.9 x 225.8
mm) each for router and satellite
Weight: 2.06lb each 1.96lb (890.5g) each for router and satellite
Three (3) wireless networks (SSID’s)- Administrative devices – with access to the wired LAN ports- Employee devices - Guest devices with Captive Portal Challenge
✅
Orbi Pro Router does not support and will not pair with OrbiHome WiFi System Satellites.
💔 💔
Features comparison with Orbi RBR50/RBS50 -3
17
Feature Orbi Pro kit SBK60 Orbi kit RBK50
Internet speedtest by OOKLA built in ✅ ✅
Ring LED (not shown in image)Sync button (also used for WPS connection)Router has a WAN Internet portPower On/Off button and Power LEDDC Power connectorReset button
✅
✅
✅
✅
✅
✅
✅
✅
✅
✅
✅
✅
Single SSID’s across router and satellitesBand steeringOrbi app supportMU-MIMOIPv6Port forwardingVPN pass-throughDynamic DNSParental controlsAccess point mode (switchable)Automatic firmware updates
✅
✅
✅
✅
✅
✅
✅
✅
✅
✅
✅
✅
✅
✅
✅
✅
✅
✅
✅
✅
✅
✅
18
Orbi Pro Wall Mount
19
• Best WiFi performance when mounted high• Improved physical and theft security• Flexible placement options
1) Place your Orbi router or satellite on the mount base and attach the router or satellite to the base with the provided screws
2) Use the wall anchors with screws to attach the wall bracket to the wall.
3) Slide the mount base onto the wall bracket.Your Orbi Pro device(s) are mounted. Done!
Extra information – ceiling mount
20
1) Place your Orbi router or satellite on the mount base and attach the router or satellite to the base with the provided screws
2) a)Use the ceiling bracket to mount directly to the ceiling.b) Attach the T-bracket to the ceiling bracket using the T-bracket screws.Keep the screws loose so that the locking plate can slide.
4) Slide the mount base onto the ceiling bracket.
5) Your Orbi Pro device(s) are mounted. Done!
3) Secure the T-bracket to the T-bar and tighten the screws.
Orbi Pro Kit RBK60 - What’s in the box?
21
• One (1) Orbi Pro Router (SBR60)• One (1) Orbi Pro Satellite (SBS60) • Two (2) wall mounts with screws• Two (2) ceiling mounts with screws • One (1) 2m Ethernet cable• Two (2) 12V/3.5A power adapters • Quick start guide
Thank You!