This note is applicablewith all versions of the UI

1 2 3

4

Ensure PICKIT2 OS is 2.32.00 (This is thecode in the actual programmer hardware). Set programming mode as shown.

Load the hex file (Auto detect, i.e. not "Manual Detect" from step 3requires a device be connected before loading the hex file).

PASS

Or FAIL

When the "Write" button is pressed, the PICKIT 2 will automatically (1) Write the device, (2) Verify the device, (3) Write the code protect bit and then (4) Verify the code protect bit. No other buttonbut "Write" ever needs to be pressed to program an unlimited number of PICs per session. The screens shown above are the programming progress after simply hitting "Write"!

Never hit any other button except"Write" from this point on!

5

Select "Verify on Write" to automatically verifyprogramming.

"Manual Device Select" may also be chosen to allow codeto be loaded when not device is connected.