Post on 13-Oct-2019
MASERATI PAS-T(VIDEO Interface)
(Quattroporte 2009~2013 / GranTurismo 2009~ )
MODEL MASERATI PAS-T-161209
DATE 2017.03.06Car-S
olutio
ns.co
m
support@car-solutions.com www.car-solutions.com
Main Spec.1. Input Spec. (MULTI VIDEO INTERFACE)
- 2 x A/V Input (External video source).- 1 x CVBS(REAR CAMERA) Input. (Rear camera source)- 1 x CVBS(FRONT CAMERA) Input. (Front camera source)- 1 x Analog RGB Input (Navigation System output)- 1 x LVDS Input. (Car Command System)
2. Output Spec.- 2 x CVBS Output (Video out for Installing Headrest Monitor)- 1 x Audio L/R Output.- 1 x LVDS Output (LCD Operation)
3. Power Spec.- Input Power : 8VDC ~ 24VDC- Consumption Power : 12Watt, Max
4. Switch Input mode- Possible to switch input mode through original button - Possible to switch input mode through provided touch film(option)- Possible to switch input mode through “HOME” button on screen
Car-S
olutio
ns.co
m
support@car-solutions.com www.car-solutions.com
External Appearance
LEDDIP S/WLVDS IN IMAGEPROGRAMLVDS OUT
POWER/IE
A/VMODE
CapacitiveTouch NAVI
RGBNAVI
TOUCH
Car-S
olutio
ns.co
m
support@car-solutions.com www.car-solutions.com
Connector Pin Assignment
*NAVI Connect
① R DATA (Red)② G DATA (Green)③ B DATA (Blue)④ SYNC (White)⑤ GND (Black)⑥ DVB-T IR (Green)⑦ DVD IR (Orange)
① ② ③ ④ ⑤ ⑥ ⑦
*POWER Connect
① ACC (Red)② CAN-H (Orange)③ CAN-L (Green)④ REAR-CAM DETECT (Brown)⑤ FRONT-CAM DETECT (Blue)⑥ REAR VCC (Red)⑦ FRONT VCC (Red)⑧ GND (Black)
① ② ③ ④ ⑤ ⑥ ⑦ ⑧
*Touch Connect
① Y-② X-③ Y+④ X+
① ② ③ ④
Car-S
olutio
ns.co
m
support@car-solutions.com www.car-solutions.com
Product Composition
Interface 1 EA
A/V Cable 1 EA
Power Cable(8pin) 1 EA
RGB Navi Cable 1 EA
OSD Board 1 EAMode S/W 1 EA
LVDS-OUT Cable 1 EA
LVDS-IN Cable 1 EA
LVDS CONNTOR 1 EA
Touch converter Cable (for KD-900) 1 EACar-S
olutio
ns.co
m
support@car-solutions.com www.car-solutions.com
Product Composition
Option : TOUCH Board
Option : Touch Cable
TOUCH Option
Option : 7.0 inch Capacitive Touch Screen
Car-S
olutio
ns.co
m
support@car-solutions.com www.car-solutions.com
DIP S/W Setting
NO. Function Selection
1 NAVION : Skipping NAVI
OFF : Display
2 AV1 (DVB-T)ON : Skipping Video
OFF : Display
3 AV2 (DVD)ON : Skipping Video
OFF : Display
4 N.C
5Setup of OEM button use for mode change
ON : using OEM buttonOFF : Not used
6,7 N.C
8 Car modelON : GranTurismo MC
OFF : GranTurismo
* Example
-Use input mode : NAVI, AV1-Mode change : by using OEM button
on steering wheel-Car : GranTurismo MC
ON
* ON : DOWN , OFF : UP
Car-S
olutio
ns.co
m
support@car-solutions.com www.car-solutions.com
Mode ChangeSteering wheel
Not use Steer wheel button.
Use Steer wheel button.
NAVI AV1 AV2OEM
※The screen is switched in order as the pictures below
Car-S
olutio
ns.co
m
support@car-solutions.com www.car-solutions.com
Mode ChangeTouch screen – Switching mode※ It is necessary to install the provided capacitive touch file on OEM monitor
※ Switching from OEM screen to External screen only (not possible to switching input mode)
Sliding the screen from left to right for switching mode
OEM External
Sliding the screen from right to left for switching mode
OEM External
Car-S
olutio
ns.co
m
support@car-solutions.com www.car-solutions.com
Mode ChangeTouch screen – Switching mode
Use Home icon, OSD menu set ‘ON’
Back to OEM screen Press long Home icon Or, press return icon
Car-S
olutio
ns.co
m
support@car-solutions.com www.car-solutions.com
OSD(On Screen Display) Control
MENU Push -> OSD menu On/Off
SEL Item Selection, Value Selection
UP Item upIncrease selected value
DOWN Item downDecrease selected value
Mode State
First Menu Second Menu Third Menu
OSD Control Board
MENU SEL UP DOWN
Car-S
olutio
ns.co
m
support@car-solutions.com www.car-solutions.com
OSD(On Screen Display) ControlFirst Menu Second Menu Third Menu Action
Option
RearCam-TypeOEM Original Camera
ExtDevice Use aftermarket Rear camera
RearCam-Power
ON Rear camera get +12V consistently
AUTO Rear camera get +12V when reverse gear on
OFF Shut out the power supply.
FrontCam-TypeOEM Original Camera
ExtDevice Use aftermarket Front camera
FrontCam-Power
ON Front camera get +12V consistently
AUTO Front camera get +12V when reverse gear on
OFF Shut out the power supply.
RearCam-RcvOptON Show Frontcam 25sec after rear mode.
OFF Default
Reset Excute Option Menu all Reset
Car-S
olutio
ns.co
m
support@car-solutions.com www.car-solutions.com
OSD(On Screen Display) Control
First Menu Second Menu Third Menu Action
Image
Brightness Adjust the value of brightness
Contrast Adjust the value of contrast
Color-RED Adjust the value of RED
Color-GREEN Adjust the value of GREEN
Color-BLUE Adjust the value of BLUE
Reset Excute Option Menu all Reset
First Menu Second Menu Third Menu Action
Image
Brightness Adjust the value of brightness
Contrast Adjust the value of contrast
Saturation Adjust the value of Saturation
Hue Adjust the value of Hue
Sharpness Adjust the value of Sharpness
Reset Excute Option Menu all Reset
NAVI-RGB menu DVD,DVB-T(DMB),NAVI-AV,REAR,FRONT menu
<< Brightness >>
<< Contrast >>
<< Saturation >>
Car-S
olutio
ns.co
m
support@car-solutions.com www.car-solutions.com
OSD Setting– Screen Mode
- Horizontal- Vertical- Scaler X Up- Scaler X Down- Scaler Y Up- Scaler Y Down
OSD(On Screen Display) Control
Car-S
olutio
ns.co
m
support@car-solutions.com www.car-solutions.com
- Option -> RearCam-RcvOpt -> 0 second = RearCam-RcvOpt menu OFF1~30 second = RearCam-RcvOpt menu ON & time control
OSD(On Screen Display) ControlOSD Setting – Front Camera Auto Mode
OEM
NAVI
AV1(DVB-T)
AV2(DVD)
REAR FRONT
OEM
NAVI
AV1(DVB-T)
AV2(DVD)
1~30 secondCar-S
olutio
ns.co
m
support@car-solutions.com www.car-solutions.com
- Factory Reset : Execute - Reset All (Setting Default)- Version : FW Version
Finish update FW, check the FW versoin
OSD(On Screen Display) ControlOSD Setting – Utility Mode
Software Version
Software Month
Software Year
Special Version
National : CN=CHINA, KR=KOREA, JP=JAPAN, US=United States
Hardware Version
PIP model : PP=PIP, LV=LVDS
Motor model : BM=BMW, BE=BENZ, MA=MASERATI, LX:LEXUS
Last Source : BEPP06SGX-130950
Car-S
olutio
ns.co
m
support@car-solutions.com www.car-solutions.com
CAN Connection
Install Manual
Can high
Can low
Can high
Can low
PARE
8. GND (Black)7. FRONT POWER (Red)6. REAR POWER (Red)5. FRONT-DETECT (Blue)4. REAR-DETECT (Brown)3. CAN-L (Green)2. CAN-H (Orange)
1. ACC (Red) Car-S
olutio
ns.co
m
support@car-solutions.com www.car-solutions.com
1. Quattroporte
Install Manual
Car-S
olutio
ns.co
m
support@car-solutions.com www.car-solutions.com
2. GranTurismo
Install Manual
* Quattroporte and GranTurismo LVDS cable are different
LCDIN/OUT change.
Car-S
olutio
ns.co
m
support@car-solutions.com www.car-solutions.com
Q & A1. If Interface has a problem, Please check LED.
- ACC on (12v), If Interface does not have a problem; GREEN LED is blinking every 1 sec..- RED LED is turn on (not blinking), Interface has a problem.
- - RED LED is turn off every 1 sec, there is no input.- - RED LED and GREEN LED both are not turn on, check the CAN or ACC connection.
2. Q : LCD screen blakcA : LVDS Cable problem or, connection problem.
3. When DTV or DVD mode, cannot control with I-Drive- Check IR cable, and DTV or DVD device’s ground cable and Interface ground cable join together with using extra cable.
- Check device in OSD menu
Car-S
olutio
ns.co
m
support@car-solutions.com www.car-solutions.com